This dissertation studies, analyzes, and experimentally demonstrates the innovative use of interference phenomenon in the field of opto-electronic information processing and optical communications. A number of optical systems using interferometric techniques both in the optical and the electronic domains has been demonstrated in the filed of signal transmission and processing, optical metrology, defense, and physical sensors. Specifically it has been shown that the interference of waves in the form of holography can be exploited to realize a novel optical scanner called Code Multiplexed Optical Scanner (C-MOS). The C-MOS features large aperture, wide scan angles, 3-D beam control, no moving parts, and high beam scanning resolution. A C-MOS based free space optical transceiver for bi-directional communication has also been experimentally demonstrated. For high speed, large bandwidth, and high frequency operation, an optically implemented reconfigurable RF transversal filter design is presented that implements wide range of filtering algorithms. A number of techniques using heterodyne interferometry via acousto-optic device for optical path length measurements have been described. Finally, a whole new class of interferometric sensors for optical metrology and sensing applications is presented. A non-traditional interferometric output signal processing scheme has been developed. Applications include, for example, temperature sensors for harsh environments for a wide temperature range from room temperature to 1000 degree C.

All-optical synchronization and its application in advanced optical communications have been investigated in this dissertation. Dynamics of all-optical timing synchronization (clock recovery) using multi-section gain-coupled distributed-feedback (MS-GC DFB) lasers are discussed. A record speed of 180-GHz timing synchronization has been demonstrated using this device. An all-optical carrier synchronization (phase and polarization recovery) scheme from PSK (phase shift keying) data is proposed and demonstrated for the first time. As an application of all-optical synchronization, the characterization of advanced modulation formats using a linear optical sampling technique was studied. The full characterization of 10-Gb/s RZ-BPSK (return-to-zero binary PSK) data has been demonstrated. Fast lockup and walk-off of the all-optical timing synchronization process on the order of nanoseconds were measured in both simulation and experiment. Phase stability of the recovered clock from a pseudo-random bit sequence signal can be achieved by limiting the detuning between the frequency of free-running self-pulsation and the input bit rate. The simulation results show that all-optical clock recovery using TS-DFB lasers can maintain a better than 5 % clock phase stability for large variations in power, bit rate and optical carrier frequency of the input data and therefore is suitable for applications in ultrafast optical packet switching. All-optical timing synchronization of 180-Gb/s data streams has been demonstrated using a MS-GC DFB laser. The recovered clock has a jitter of less than 410 fs over a dynamic range of 7 dB. All-optical carrier synchronization from phase modulated data utilizes a phase sensitive oscillator (PSO), which used a phase sensitive amplifier (PSA) as a gain block. Furthermore, all-optical carrier synchronization from 10-Gb/s BPSK data was demonstrated in experiment. The PSA is configured as a nonlinear optical loop mirror (NOLM). A discrete linear system analysis was carried out to understand the stability of the PSO. Complex envelope measurement using coherent linear optical sampling with mode-locked sources is investigated. It is shown that reliable measurement of the phase requires that one of the optical modes of the sampling pulses be locked to the optical carrier of the data signal to be measured. Carrier-envelope offset (CEO) is found to have a negligible effect on the measurement. Measurement errors of the intensity profile and phase depend on the pulsewidth and chirp of the sampling pulses as well as the detuning between the carrier frequencies of the data signal and the center frequency of the sampling source. Characterization of the 10-Gb/s RZ-BPSK signal was demonstrated using the coherent detection technique. Measurements of the optical intensity profile, chirp and constellation diagram were demonstrated. A CW local oscillator was used and electrical sampling was performed using a sampling scope. A novel feedback scheme was used to stabilize homodyne detection.

No description available.

No description available.

<p>Free-space optical (FSO) communication has witnessed rapid development recently in response to ever-increasing demands for greater bandwidth. FSO links provide fiberspeed with the flexibility of wireless. Commercially available systems offer transmission speeds up to 2.5 Gbps, 5 Gbps and 10 Gbps, and demonstration systems report data rates as high as 160 Gbps. Its advantages also include license free operation, high immunity to interference, and ease of deployment. However, FSO systems are sensitive to adverse weather conditions such as fog, rain and snow.</p> <p>In order to improve the availability of FSO channels degraded by atmospheric turbulence and varying weather conditions, the effects of channel gain variations must be compensated. In this thesis, two rate-adaptive techniques, punctured low-density parity-check (LDPC) codes and Raptor codes, are studied using experimental data measured over a1.87 km terrestrial FSO link.</p> <p>Rate-adaptive performances with punctured LDPC codes and Raptor codes are evaluated in terms of outage probability and throughput. In comparison to uncoded system, rate-adaptive systems with both techniques demonstrate significant improvement of throughput and mitigation of outage probability especially in rainy weather. Due to its flexible rate-adaptation and simple hardware implementation, Raptor coded systems are judged more applicable to be implemented in field-programmable gate array (FPGA) based hardware. A dedicated decoding structure is proposed and tested, showing remarkable improvement in resource efficiency as compared to traditional Gauss-Jordan (GJ) decoding structures.</p> / Master of Applied Science (MASc)

Nonlinear fiber devices have been attracting considerable attention in recent years, due to their inherent ultrafast response time and potential applications in optical communication systems. They usually require long fibers to generate sufficient nonlinear phase shifts, since nonlinearities of conventional silica-core silica-clad fibers are too low. These long devices, however, cause the serious problems of pulse walk-off, pulse broadening, and polarization fluctuation which are major limiting factors for response time, switching bandwidth, and maximum transmittable bit-rate. Therefore, short device length is indispensable for achieving ultrafast switching and higher bit-rate data transmission. To shorten the required device length, fiber nonlinearities should be increased. In this dissertation, as a way of increasing fiber nonlinearities, high-nonlinearity materials of Litharge, Bismite, Tellurite, and Chalcogenide glasses have been considered. Although they have high nonlinearities, they also have high group-velocity dispersion and high losses deteriorating the performance of nonlinear fiber devices seriously. The aim of this work is to investigate how these high-nonlinearity glasses affect the performance of nonlinear fiber devices, taking into consideration both the advantages and disadvantages. To achieve it, the critical properties of various nonlinear fiber devices constructed with the different types of high-nonlinearity glasses and different types of fibers have been evaluated. It turned out that the required device lengths of nonlinear fiber devices constructed with the high-nonlinearity glasses were significantly reduced and high group-velocity dispersions and losses could not be major problems due to the extremely short device length. As a result, it would be possible to suppress the problems of pulse walk-off, pulse broadening, and polarization fluctuation in nonlinear fiber devices by introducing high-nonlinearity glasses, thus enabling ultrafast switching and higher bit-rate data transmission. Furthermore, in this dissertation, a new scheme of wavelength-division demultiplexing based on the optical Kerr effect has been proposed for the first time. The new scheme can turn the disadvantage of the extremely high group-velocity dispersion of high-nonlinearity glasses into an advantage of wavelength-division demultiplexing. Finally, it now would be possible to greatly increase maximum transmittable bit-rate in optical communication systems by simultaneously demultiplexing optical time-division-multiplexed signals and wavelength-division-multiplexed signals with an optical Kerr effect-based demultiplexer. / Ph. D.

Free-space optical communication technology has many advantages over RF/microwave in satellite and other spacecraft applications where reductions in size, weight and prime power requirements are combined with increased data transfer capability over long distances. Ultimately, the design and implementation of free-space optical communication systems is dependent on suitable analysis of the link. The analysis of these systems is difficult due to the complicated time-varying propagation of optical energy over the free-space channel. This difficulty is combined with a shortage of suitable analytical expressions for adequately determining the performance of free-space optical receivers. As the link must be modeled and analyzed, simulation of the free-space optical communication link can initiate the process of exploring the application of lightwave technology to the free-space channel. A prohibitive amount of time is required to simulate receiver bit error rate (BER) performance at the low error rates of interest. This dissertation presents the results achieved in reducing the amount of time required to simulate, to a given accuracy, the bit error rate performance of an APD based free-space optical receiver. An improved technique for the importance sampling simulation of direct detection APD receivers has been developed. Two methods for efficiently simulating and biasing the probability distribution function of the APD process are presented and discussed. This is the first use the Webb, McIntyre, Conradi statistics in importance sampling simulation of an APD. The general procedure for applying importance sampling to the optical communication system simulation problem is presented in detail. The technique of importance sampling has been extended to include the simulation of maximum likelihood optical M-ary PPM receivers, an optical receiver relevant to free-space applications. The use of importance sampling is shown to reduce the time required to simulate M-PPM APD receivers by several orders of magnitude, from 9000 years to less than one hour in one example. / Ph. D.

Circuits to extend operation data-rate of a optical receiver is investigated in the dissertation. A new input-stage topology for a transimpedance amplifier (TIA) is designed to achieve 50% higher data-rate is presented, and a new architecture for clock recovery is proposed for 50% higher clock rate. The TIA is based on a gm-boosted common-gate amplifier. The input-resistance is reduced by modifying a transistor at input stage to be diode-connected, and therefore lowers R-C time constant at the input and yielding higher input pole frequency. It also allows removal of input inductor, which reduces design complexity. The proposed circuit was designed and fabricated in 32 nm CMOS SOI technology. Compared to TIAs which mostly operates at 50 GHz bandwidth or lower, the presented TIA stage achieves bandwidth of 74 GHz and gain of 37 dBohms while dissipating 16.5 mW under 1.5V supply voltage. For the clock recovery circuit, a phase-locked loop is designed consisting of a frequency doubling mechanism, a mixer-based phase detector and a 40 GHz voltage-controlled oscillator. The proposed frequency doubling mechanism is an all-analog architecture instead of the conventional digital XOR gate approach. This approach realizes clock-rate of 40 GHz, which is at least 50% higher than other circuits with mixer-based phase detector. Implemented with 0.13-μm CMOS technology, the clock recovery circuit presents peak-to-peak clock jitter of 2.38 ps while consuming 112 mW from a 1.8 V supply. / Ph. D. / This dissertation presents two electronic circuits for future high-speed fiber optics applications. A receiver in a optical communication systems includes several circuit blocks serving various functions: (1) a photodiode for detecting the input signal; (2) a transimpedance amplifier (TIA) to amplify the input signal; (3) a clock and data recovery block to re-condition the input signal; and (4) digital signal processing. High speed integrated circuits are commonly fabricated in SiGe or other high electron mobility semiconductor technologies, but receiver circuits based on Silicon using complementary metal oxide semiconductor (CMOS) technology has gained attention in open literatures due to its advantage of integrating signal processing . This dissertation shows a TIA circuit and a clock recovery circuit designed and implemented in CMOS technology. The TIA circuit is based on a ”g_m-boosted common-gate amplifier” topology, and a slight modification at the input of the topology is proposed. Implemented in 32nm SOI CMOS technology, the TIA measures bandwidth that achieved 100 Gb/s bandwidth. The bandwidth is increased by at least 48% when compared with state-of-the-art CMOS TIA’s. The clock recovery circuit is a phase-locked loop with a mixer as the phase detector. An architectural change of replacing the conventional frequency doubling mechanism is proposed. The circuit is implemented in 0.13 µm CMOS technology, and it achieved 40 GHz clock rate with 40 Gb/s data input, which is about 40% increase of clock rate compared to state-of-the-art clock recovery circuits of similar architecture.

Tesis por compendio / [ES] Con el continuo desarrollo de materiales y tecnologías de fabricación durante las últimas tres décadas, la atenuación de la transmisión de las fibras ópticas de polímero (POF) se ha reducido considerablemente. Las POF son ventajosas para las redes domésticas, así como para las interconexiones de almacenamiento, y tienen ventajas significativas para muchas aplicaciones de detección, que incluye el límite alto de tensión elástica, alta resistencia a la fractura, alta flexibilidad en la flexión, alta sensibilidad a la tensión y coeficientes termoópticos negativos. Esta tesis consigue mejorar la tecnología de irradiación con láser para POF e investiga dispositivos especiales basados en redes de difracción en POF para comunicaciones ópticas, microondas, fotónica y detección. En particular, desarrollamos la tecnología de fabricación rápida de FBGs en POF con un estudio detallado y la optimización de los parámetros de fabricación de redes de difracción de Bragg en fibra (FBG). Los resultados más destacados incluyen un FBG uniforme de 8 dB con un solo pulso láser Nd: YAG (26 nsm) (8 ns) basado en fibra dopada con BDK, que es el tiempo más corto presentado hasta ahora para la fabricación de FBGs en POF. La irradiación de fibras ópticas de polímero utilizando diferentes materiales basado en el láser KrF a 248 nm permitió demostrar un mejor rendimiento en comparación con el sistema que emplea el láser He-Cd a 325 nm. Además, se fabricaron FBGs uniformes en POFs de índice escalón dopadas con TS en menos de 1 segundo mediante la repetición de pulsos con baja energía. Finalmente, el estudio de la irradiación UV con pulsos de baja energía para la fabricación de redes de difracción estables permitió ahorrar energía en el proceso de fabricación de FBGs en POF, como uno de los principales requisitos para la producción en masa. Basándonos en la tecnología de fabricación mejorada, nos centramos en la fabricación de redes de difracción con diferentes estructuras: se fabricó un FBG con desplazamiento de fase utilizando dos pulsos de 15 ns a 248 nm KrF superpuestos por el método de Moiré; el primer FBG con chirp sintonizable se logró utilizando un solo pulso corto del láser, que abrió nuevas perspectivas a las aplicaciones basadas en redes de difracción con chirp en POF; también se propuso un nuevo método basado en gradientes térmicos para obtener FBG con chirp en POF basadas en FBG uniformes, y se demostró como la forma más conveniente publicada hasta la fecha para lograr este tipo de FBGs no uniformes en POF; y, finalmente, también se han fabricado redes de difracción de largo período utilizando un proceso de fabricación de corto tiempo, especialmente en comparación con investigaciones anteriores. En la última parte de la tesis, y en base a los dispositivos basados en redes de difracción obtenidos a lo largo de este trabajo, se han propuesto varias aplicaciones . De manera similar a los FBG en fibra de sílice, los FBGs con chirp en POF tienen muchas aplicaciones futuras en las áreas de comunicaciones ópticas y de los sensores. Este documento describe la aplicación de detección de tensión basada en una FBG con chirp sintonizable en POF, su aplicación para detección térmica en sistemas biomédicos; e ilustra el potencial de los dispositivos de dispersión sintonizables en el campo de las comunicaciones ópticas, bien como compensación de dispersión o en fotónica de microondas. / [CA] Amb el continu desenvolupament de materials i tecnologies de fabricació durant les últimes tres dècades, l'atenuació de la transmissió de les fibres òptiques de polímer (POF) s'ha reduït considerablement. Els POF són avantatjosos per a les xarxes domèstiques, així com per a les interconnexions d'emmagatzematge, i tenen avantatges significatius per a moltes aplicacions de detecció, inclosos els límits de tensió elàstica alta, alta resistència a la fractura, alta flexibilitat en la flexió, alta sensibilitat a la tensió i potencials coeficients termoópticos negatius. Aquesta tesi va millorar la tecnologia d'irradiació amb làser per a POF i va investigar dispositius basats en xarxes difracció de Bragg (FBG) especials en POF per a comunicació òptica, microones, fotònica i detecció. En particular, desenvolupem la tecnologia de fabricació ràpida de FBG en POF amb un estudi detallat i l'optimització dels paràmetres per a la seua fabricació. Els punts destacats dels resultats inclouen un FBG uniforme de 8 dB amb un sol pols del làser Nd: YAG (266 nm) (8 ns) basat en fibra dopada amb BDK, que és el temps més curt reportat per a la fabricació de POF FBG. La irradiació de fibres òptiques de polímer utilitzant diferents materials sota el sistema de làser KrF a 248 nm va permetre demostrar un millor rendiment en comparació amb el sistema de làser Kimmon de 325 nm. A més, els FBG uniformes en el POF dopat amb TS d'índex escalonat es van aconseguir amb menys d'1 segon mitjançant la repetició de polsos de control i l'energia baixa de pols. Finalment, l'estudi de la irradiació d'energia de pols per a la fabricació de FBGs estables va permetre estalviar energia en el procés de fabricació de FBGs en POF, com un dels principals objectius de la producció en massa. Basant-nos en la tecnologia de fabricació millorada, ens centrem en la fabricació de diferents estructures de xarxes de difracció: es va fabricar un FBG amb desplaçament de fase utilitzant dos polsos de 15 ns a 248 nm KrF superposats pel mètode de Moiré; el primer FBG amb chirp sintonitzable es va aconseguir utilitzant un sol pols curt de làser, que va obrir les aplicacions basades en FBG amb chirp en POF; també es va proposar un nou mètode amb gradients tèrmics per a obtindre FBG en POF basat en FBG uniformes, i es va demostrar com la forma més convenient publicada fins hui per a aconseguir FBG POF estimulada; i, finalment, també s'han aconseguit xarxes de llarg període utilitzant un procés de fabricació de curt temps, especialment en comparació amb investigacions anteriors. Finalment, sobre la base dels dispositius de xarxes de difracció obtinguts al llarg d'aquest treball, s'han proposat diverses aplicacions potencials en aquesta tesi. De manera similar que per als FBG amb silici, el FBG amb chirp en POF té moltes aplicacions potencials en comunicacions òptiques i a l¿àrea de sensors. Aquest document descriu l'aplicació de detecció de tensió basada en FBG amb chirp sintonitzable en POF; a més, l'aplicació de detecció tèrmica en sistemes biomèdics; i el potencial dels dispositius de dispersió sintonitzables en les comunicacions òptiques, com per eixample a la compensació de dispersió o a la fotònica de microones. / [EN] With the continuing development of material and fabrication technologies over the last three decades, the transmission attenuation of polymer optical fibers (POF) has been greatly decreased. POFs are advantageous for home networks as well as storage interconnections and have significant advantages for many sensing applications, including high elastic strain limits, high fracture toughness, high flexibility in bending, high sensitivity to strain and potential negative thermo-optic coefficients. This thesis improved the laser irradiation technology for POF and investigated special grating devices in POF for optical communication, microware photonics and sensing. In particular, we developed fast POF grating fabrication technology with a detailed study and optimization of the polymer optical fiber Bragg grating (POFBG) fabrication parameters. Highlights of the results include an 8 dB uniform POFBG with one single Nd:YAG (266nm) laser pulse (8 ns) based on BDK doped fiber, which is the shortest time ever reported for POFBG fabrication. The irradiation of polymer optical fibers using different materials under 248 nm KrF laser system allowed to demonstrate a better performance compared with 325 nm Kimmon laser system. Furthermore, uniform FBGs in step-index TS doped POF were achieved with less than 1 second by means of controlling pulse repetition and low pulse energy. Finally, the study of low UV pulse power irradiation for fabricating stable gratings allowed to save energy in the POF grating fabrication process, as one of the main goals for mass production. Based on the improved fabrication technology, we focused on the fabrication of different grating structures: a phase-shifted FBG was fabricated by using two 15 ns 248 nm KrF pulses overlapped by Moiré method; the first tunable chirped FBG was achieved by using a single laser short pulse, which opened the applications based on chirped POF BGs; also a novel thermal annealing method was proposed to obtain chirped POFBGs based on uniform FBGs, and proved as the ever published most convenient way to achieve chirped POFBG; and finally, long period gratings have been also achieved by using a short time fabrication process, specially when compared with previous research. Finally, based on the grating devices obtained throughout this work, several potential applications have been proposed in this thesis. Similarly, to silica chirped FBG, chirped FBG in POF have many potential applications in optical communications and sensing area. This document described the potential strain sensing application based on tunable chirped POFBG; also, the thermal detection application in bio-medical systems; and the potential of tunable dispersion devices in optical communications, i.e., dispersion compensation or microwave photonics. / Min, R. (2019). Polymer optical fiber gratings for microwave photonics and communications application [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/125473 / Compendio

<p>The task of the project was to evaluate a differential phase shift keying demodulation technique by replacing a Mach-Zehnder interferometer receiver with an optical filter (Fiber Bragg Grating). Computer simulations were made with single optical transmission, multi channel systems and transmission with combined angle/intensity modulated optical signals. The simulations showed good results at both 10 and 40 Gbit/s. Laboratory experiments were made at 10 Gbit/s to verify the simulation results. It was found that the demodulation technique worked, but not with satisfactory experimental results. The work was performed at Eindhoven University of Technology, Holland, within the framework of the STOLAS project at the department of Electro-optical communication.</p>