No description available.

Colloidal semiconductor nanocrystals (NCs) have attracted a great deal of interest as bright and stable chromophores for a variety of applications. Their superior physicochemical properties depend on characteristics of the inorganic core, as well as on the chemical nature and structure of the stabilizing organic ligand shell. To evaluate the promising material, a thorough knowledge of structure-property relationships is still demanded. The present work addresses this challenge to three water-soluble NC systems, namely thiol-capped CdTe, thiol-capped CdHgTe, and DNA-functionalized CdTe NCs with special emphasis on the investigation of structure, modification, and influence of the ligand shell. Remarkably, CdTe NCs show bright emission in the visible spectral region and can be synthesized in high quality directly in water. It was shown that the aqueous synthesis also facilitates the preparation of strongly near-infrared (NIR) emitting CdHgTe NCs. The current work presents a detailed study on parameters, by which the emission can be tuned, such as the growth time, the initial Cd : Hg ratio, and the choice of ligand. These insights contribute to the knowledge, which is essential for the design of highly emissive and long-term stable NIR emitting NCs. Further variations of the NC/ligand system include the modification of the ligand shell of CdTe NCs with oligonucleotides based on the strong attachment of DNA molecules to the NC. The successful functionalization of NCs with single-stranded DNA molecules is very promising for the precise and programmable assembly of NCs using DNA origami structures as templates. For both, functionality and optical properties, the surface chemistry of the NCs plays a substantial role and was subject to an extensive investigation. As there is no generally applicable technique to determine the amount of stabilizers and the structure of the ligand shell, the presented study is based on a combination of various methods particularly tailored to the analysis of water-soluble CdTe NCs capped by short-chain thiols. CdTe NCs served as a model system for the described analysis of the ligand shell, since they are thoroughly studied regarding synthesis and features of the core. Aiming for the quantification of thiols, a straightforward colorimetric assay, the Ellman\'s test, is for the first time introduced for the analysis of NCs. Accompanied by elemental analysis an approximate number of thiols per NC becomes accessible. Moreover, theoretical calculations were performed to estimate the amount of ligand that would cover the NC in a monolayer of covalently bound molecules. In contrast to these results, the experimental values point to a larger amount of thiols immobilized on the NC. Attempts to remove the ligand indicate the presence of Cd in the ligand shell and thermogravimetric studies show that the ligands are not loosely assembled in the ligand shell. The outstanding conclusion of these findings involves the presence of Cd-thiol complexes in the ligand shell. Further results unambiguously show that the amount of Cd-thiol complexes present in the NC solution strongly influences the concentration-dependent emission yield of the NCs. Additional studies dedicated to the considerable influence of the ligand shell highlight a strong effect of pH, NC concentration, type and purity of the solvent, and the number of precipitation steps on the emission of water-soluble semiconductor NCs. These substantial investigations emphasize the need to carefully control the conditions applied for handling, optical measurements, and application of NCs. In order to gain a deeper insight into the complex structure of the native ligand shell, techniques deliberately chosen for the in situ analysis were applied for thioglycolic acid-capped CdTe NCs. Information from dynamic light scattering (DLS) regarding the stability and the shell thickness are consistent with previous results showing a large ligand network on the NC surface and a decreasing stability of the NCs upon dilution. Importantly, nuclear magnetic resonance (NMR) spectroscopy allows for the distinction of bound and free ligands directly in solution and proves the presence of these species for the NCs studied. In particular, the results indicate that the ligands are not strongly bound to the NC core and that both, free and bound ligand species, consist of modified thiol molecules, such as Cd-thiol complexes. These findings support previous assumptions and allow to establish a distinct picture of the ligand shell of water-soluble semiconductor NCs. Further insights were obtained from small-angle X-ray scattering (SAXS), which facilitates the identification and the determination of the composition of NC core as well as ligand shell. Element-specific SAXS yields the final proof of the presence of Cd in the ligand shell. The model developed for the optimal fitting of the experimental scattering curves additionally confirms the findings from the other methods. In conclusion, the present work contributes to the challenging goal of a comprehensive knowledge of interactions between the NC core and the ligands. The fundamental development of a structural model of water-soluble CdTe NCs including information on stoichiometries is accomplished by the combination of the techniques presented and emphasizes the challenge to assign a clear border between the ligand shell and the Cd-thiol complexes in solution. Altogether, CdTe NCs capped by thioglycolic acid are best described by a crystalline core surrounded by a water-swollen Cd-thiolate shell that considerably affects the optical properties of the system. Notably, the results of the versatile study provide the opportunity to control the overall properties and to evaluate water-soluble semiconductor NCs for particular applications in photonics and optoelectronics.

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.

Colloidal semiconductor nanocrystals (NCs) have attracted a great deal of interest as bright and stable chromophores for a variety of applications. Their superior physicochemical properties depend on characteristics of the inorganic core, as well as on the chemical nature and structure of the stabilizing organic ligand shell. To evaluate the promising material, a thorough knowledge of structure-property relationships is still demanded. The present work addresses this challenge to three water-soluble NC systems, namely thiol-capped CdTe, thiol-capped CdHgTe, and DNA-functionalized CdTe NCs with special emphasis on the investigation of structure, modification, and influence of the ligand shell. Remarkably, CdTe NCs show bright emission in the visible spectral region and can be synthesized in high quality directly in water. It was shown that the aqueous synthesis also facilitates the preparation of strongly near-infrared (NIR) emitting CdHgTe NCs. The current work presents a detailed study on parameters, by which the emission can be tuned, such as the growth time, the initial Cd : Hg ratio, and the choice of ligand. These insights contribute to the knowledge, which is essential for the design of highly emissive and long-term stable NIR emitting NCs. Further variations of the NC/ligand system include the modification of the ligand shell of CdTe NCs with oligonucleotides based on the strong attachment of DNA molecules to the NC. The successful functionalization of NCs with single-stranded DNA molecules is very promising for the precise and programmable assembly of NCs using DNA origami structures as templates. For both, functionality and optical properties, the surface chemistry of the NCs plays a substantial role and was subject to an extensive investigation. As there is no generally applicable technique to determine the amount of stabilizers and the structure of the ligand shell, the presented study is based on a combination of various methods particularly tailored to the analysis of water-soluble CdTe NCs capped by short-chain thiols. CdTe NCs served as a model system for the described analysis of the ligand shell, since they are thoroughly studied regarding synthesis and features of the core. Aiming for the quantification of thiols, a straightforward colorimetric assay, the Ellman\'s test, is for the first time introduced for the analysis of NCs. Accompanied by elemental analysis an approximate number of thiols per NC becomes accessible. Moreover, theoretical calculations were performed to estimate the amount of ligand that would cover the NC in a monolayer of covalently bound molecules. In contrast to these results, the experimental values point to a larger amount of thiols immobilized on the NC. Attempts to remove the ligand indicate the presence of Cd in the ligand shell and thermogravimetric studies show that the ligands are not loosely assembled in the ligand shell. The outstanding conclusion of these findings involves the presence of Cd-thiol complexes in the ligand shell. Further results unambiguously show that the amount of Cd-thiol complexes present in the NC solution strongly influences the concentration-dependent emission yield of the NCs. Additional studies dedicated to the considerable influence of the ligand shell highlight a strong effect of pH, NC concentration, type and purity of the solvent, and the number of precipitation steps on the emission of water-soluble semiconductor NCs. These substantial investigations emphasize the need to carefully control the conditions applied for handling, optical measurements, and application of NCs. In order to gain a deeper insight into the complex structure of the native ligand shell, techniques deliberately chosen for the in situ analysis were applied for thioglycolic acid-capped CdTe NCs. Information from dynamic light scattering (DLS) regarding the stability and the shell thickness are consistent with previous results showing a large ligand network on the NC surface and a decreasing stability of the NCs upon dilution. Importantly, nuclear magnetic resonance (NMR) spectroscopy allows for the distinction of bound and free ligands directly in solution and proves the presence of these species for the NCs studied. In particular, the results indicate that the ligands are not strongly bound to the NC core and that both, free and bound ligand species, consist of modified thiol molecules, such as Cd-thiol complexes. These findings support previous assumptions and allow to establish a distinct picture of the ligand shell of water-soluble semiconductor NCs. Further insights were obtained from small-angle X-ray scattering (SAXS), which facilitates the identification and the determination of the composition of NC core as well as ligand shell. Element-specific SAXS yields the final proof of the presence of Cd in the ligand shell. The model developed for the optimal fitting of the experimental scattering curves additionally confirms the findings from the other methods. In conclusion, the present work contributes to the challenging goal of a comprehensive knowledge of interactions between the NC core and the ligands. The fundamental development of a structural model of water-soluble CdTe NCs including information on stoichiometries is accomplished by the combination of the techniques presented and emphasizes the challenge to assign a clear border between the ligand shell and the Cd-thiol complexes in solution. Altogether, CdTe NCs capped by thioglycolic acid are best described by a crystalline core surrounded by a water-swollen Cd-thiolate shell that considerably affects the optical properties of the system. Notably, the results of the versatile study provide the opportunity to control the overall properties and to evaluate water-soluble semiconductor NCs for particular applications in photonics and optoelectronics.

Colloidal semiconductor quantum dots (QDs) have gained substantial interest as adjustable, bright and spectrally tunable fluorophores in the past decades. Besides their in-depth analyses in the scientific community, first industrial applications as color conversion and color enrichment materials were implemented. However, stability and processability are essential for their successful use in these and further applications. Methods to embed QDs into oxides or polymers can only partially solve this challenge. Recently, our group introduced the embedding of QDs into ionic salts, which holds several advantages in comparison to polymer or oxide-based counterparts. Both gas permeability and environmental-related degradation processes are negligible, making these composites an almost perfect choice of material. To evaluate this new class of QD-salt mixed crystals, a thorough understanding of the formation procedure and the final composites is needed. The present work is focused on embedding both aqueous-based and oil-based metal-chalcogenide QDs into several ionic salts and the investigations of their optical and chemical properties upon incorporation into the mixed crystals. QDs with well-known, reproducible and high-quality synthetic protocols are chosen as emissive species. CdTe QDs were incorporated into NaCl as host matrix by using the straightforward "classical" method. The resulting mixed crystals of various shapes and beautiful colors preserve the strong luminescence of the incorporated QDs. Besides NaCl, also borax and other salts are used as host matrices. Mercaptopropionic acid stabilized CdTe QDs can easily be co-crystallized with NaCl, while thioglycolic acid as stabilizing agent results in only weakly emitting powder-like mixed crystals. This challenge was overcome by adjusting the pH, the amount of free stabilizer and the type of salt used, demonstrating the reproducible incorporation of highest-quality CdTe QDs capped with thioglycolic acid into NaCl and KCl salt crystals. A disadvantage of the "classical" mixed crystallization procedure was its long duration which prevents a straightforward transfer of the protocol to less stable QD colloids, e.g., initially oil-based, ligand exchanged QDs. To address this challenge, the "Liquid-liquid-diffusion-assisted-crystallization" (LLDC) method is introduced. By applying the LLDC, a substantially accelerated ionic crystallization of the QDs is shown, reducing the crystallization time needed by one order of magnitude. This fast process opens the field of incorporating ligand-exchanged Cd-free QDs into NaCl matrices. To overcome the need for a ligand exchange, the LLDC can also be extended towards a two-step approach. In this modified version, the seed-mediated LLDC provides for the first time the ability to incorporate oil-based QDs directly into ionic matrices without a prior phase transfer. The ionic salts appear to be very tight matrices, ensuring the protection of the QDs from the environment. As one of the main results, these matrices provide extraordinary high photo- and chemical stability. It is further demonstrated with absolute measurements of photoluminescence quantum yields (PL-QYs), that the PL-QYs of aqueous CdTe QDs can be considerably increased upon incorporation into a salt matrix by applying the "classical" crystallization procedure. The achievable PL enhancement factors depend strongly on the PL-QYs of the parent QDs and can be described by the change of the dielectric surrounding as well as the passivation of the QD surface. Studies on CdSe/ZnS in NaCl and CdTe in borax showed a crystal-induced PL-QY increase below the values expected for the respective change of the refractive index, supporting the derived hypothesis of surface defect curing by a CdClx formation as one main factor for PL-QY enhancement. The mixed crystals developed in this work show a high suitability as color conversion materials regarding both their stability and spectral tunability. First proof-of-concept devices provide promising results. However, a combination of the highest figures of merit at the same time is intended. This ambitious goal is reached by implementing a model-experimental feedback approach which ensures the desired high optical performance of the used emitters throughout all intermediate steps. Based on the approach, a white LED combining an incandescent-like warm white with an exceptional high color rendering index and a luminous efficacy of radiation is prepared. It is the first time that a combination of this highly related figures of merit could be reached using QD-based color converters. Furthermore, the idea of embedding QDs into ionic matrices gained considerable interest in the scientific community, resulting in various publications of other research groups based on the results presented here. In summary, the present work provides a profound understanding how this new class of QD-salt mixed crystal composites can be efficiently prepared. Applying the different crystallization methods and by changing the matrix material, mixed crystals emitting from blue to the near infrared region of the electromagnetic spectrum can be fabricated using both Cd-containing and Cd-free QDs. The resulting composites show extraordinary optical properties, combining the QDs spectral tunability with the rigid and tight ionic matrix of the salt. Finally, their utilization as a color conversion material resulted in a high-quality white LED that, for the first time, combines an incandescent-like hue with outstanding optical efficacy and color rendering properties. Besides that, the mixed crystals offer huge potential in other high-quality applications which apply photonic and optoelectronic components.

In dieser Dissertation wird zum einen die ultraschnelle Ladungsträgerkinetik in einem Galliumnitrid (GaN)-basierten Übergitter, zum anderen die piezoelektrische Elektron-Phonon-Wechselwirkung kohärenter zonengefalteter Phononen in Galliumarsenid (GaAs)-basierten Übergittern behandelt. Mittels spektral- und zeitaufgelöster Photolumineszenzmessungen an einem n-dotierten GaN/Al0,18Ga0,82N Übergitter mit Parametern ähnlich derer in optoelektronischen Bauelementen wurde die defektbedingte Ladungsträgerkinetik untersucht, die innerhalb von ca. 150 ps durch den Einfang in tiefe, nichtstrahlende Rekombinationszentren beeinflusst wird. Die Untersuchung einer Passivierung mit Siliziumnitrid zur Verhinderung von Degradationseffekten zeigte ein stabiles optisches Langzeitverhalten bei gleichzeitiger Zunahme nichtstrahlender Defekte. Ferner wurde mit spektral aufgelöster Anrege-Abfrage-Spektroskopie eine Einfangkinetik auf einer Zeitskala von 150 - 200 fs in Defektzustände nahe der Übergitterbandkante gemessen, gefolgt von der Abkühlung der Ladungsträger durch Phononemission innerhalb weniger Pikosekunden bei Raumtemperatur und 35 ps bei 5 K. Kohärente zonengefaltete Phononen wurden mit Anrege-Abfrage-Spektroskopie an zwei AlAs/GaAs-Übergittern untersucht, die in [100]-, bzw. [111]-Richtung gewachsen wurden. Dies ermöglicht die (gezielte) Untersuchung der piezoelektrischen Elektron-Phonon-Kopplung, da diese für longitudinal-akustischen Phononen nur in der [111]-Probe existiert. Die Amplitude kohärenter Phononen mit einem Wellenvektor von q=0 in der [111]-Probe fällt verglichen mit denen in der [100]- und der [111]-Probe mit q≠0 signifikant schneller ab. Kohärente Phononen verursachen in der [111]-Probe bei q=0 ein makroskopisches piezoelektrisches Feld, welches Ladungsträger beschleunigt, die durch Reibung kohärente Phononen dämpfen. Bei hohen Ladungsträgerdichten unterdrückt die Abschirmung der induzierten piezoelektrischen Felder diese zusätzliche Dämpfung. / In this dissertation, the ultrafast carrier dynamics in a gallium nitride (GaN)-based superlattice as well as the piezoelectric electron-phonon-coupling of coherent zone-folded phonons in gallium arsenide (GaAs)-based superlattices are addressed. Using spectrally and time-resolved photoluminescence experiments on an exemplary n-doped GaN/Al0.18Ga0.82N superlattice with parameters similar to those in optoelectronic devices, we investigated the defect-related carrier kinetics, that are affected by trapping in saturable nonradiative recombination centers on time scales of ~150 ps. The investigation of a passivation with silicon nitride to prevent degradation effects show a long-term optical stability with a concomitant increase in non-radiative defect densities. Furthermore, spectrally resolved pump-probe spectroscopy was used to measure trapping kinetics into defect states near the conduction band minimum on a time scale of 150 – 200 fs. These kinetics are followed by carrier cooling through phonon emission within a few picoseconds at room temperature and within 35 ps at 5 K. Coherent zone-folded phonons were studied with pump-probe spectroscopy on two AlAs/GaAs superlattices grown in [100] and [111] direction, respectively. This allows the specific investigation of the piezoelectric electron-phonon interaction, since this exists for longitudinal acoustic phonons only in the [111] sample. The amplitude of coherent phonons with a wave vector of q=0 in the [111] sample decays significantly faster than in the [100] and the [111] samples with q≠0. Coherent phonons in the [111] sample cause a macroscopic piezoelectric field to which the photogenerated electron-hole plasma couples. Friction of the accelerated carriers provides the additional damping mechanism. High carrier densities screen the induced piezoelectric field, thus reducing the damping mechanism via the piezoelectric interaction.

A straightforward, rapid method to create colloidally stable and brightly luminescent core/shell CdSe-based nanoplatelets (NPLs) with fluorescence quantum yields (QYs) up to 50% is demonstrated. A layer-by-layer deposition technique based on a two-phase mixture ‒ consisting of a nonpolar phase which includes the NPLs, and a saturated ionic polar phase ‒ to separate the reagents and hinder the nucleation of the shell material is used. The deposition of the first sulfur layer leads to a significant red-shift (by more than 100 nm) of the optical absorption and emission of the NPLs. Hence, by varying either the sulfur precursor content or the reaction time one can precisely and continuously tune the absorption and emission maxima from 520 to 630 nm. This evolution of the absorption onset during the shell growth is explained quantitatively using density-functional theory and atomistic statistical simulations. The emission can be further enhanced by exposure of the NPL solution to ambient sunlight. Finally, it is demonstrated that the core/shell NPLs can be transferred from the organic solution to aqueous media with no reduction of their QY that opens the door to a broad range of practical applications.

Single self-assembled semiconductor quantum dots (QDs) are able to emit single-photons and entangled-photons pairs. They are therefore considered as potential candidate building blocks for quantum information processing (QIP) and communication. To exploit them fully, the ability to precisely control their optical properties is needed due to several reasons. For example, the stochastic nature of their growth ends up with only little probability of finding any two or more QDs emitting indistinguishable photons. These are required for two-photon quantum interference (partial Bell-state measurement), which lies at the heart of linear optics QIP. Also, most of the as-grown QDs do not fulfil the symmetries required for generation of entangled-photon pairs. Additionally, tuning is required to establish completely new systems, for example, 87Rb atomic-vapors based hybrid semiconductoratomic (HSA) interface or QDs with significant heavy-hole (HH)-light-hole (LH) mixings. The former paves a way towards quantum memories and the latter makes the optical control of hole spins much easier required for spin- based QIP. This work focuses on the optical properties of a new type of QDs optimized for HSA experiments and their broadband tuning using strain. It was created by integrating the membranes, containing QDs, onto relaxor-ferroelectric actuators and was quantified with a spatial resolution of ~1 µm by combining measurements of the µ-photoluminescence of the regions surrounding the QDs and dedicated modeling. The emission of a neutral exciton confined in a QD usually consists of two fine-structure-split lines which are linearly polarized along orthogonal directions. In our QDs we tune the emission energies as large as ~23meV and the fine-structure-splitting by more than 90 µeV. For the first time, we demonstrate that strain is able to tune the angle between the polarization direction of these two lines up to 40° due to increased strain-induced HH-LH mixings up to ~55%. Compared to other quantum emitters, QDs can be easily integrated into optoelectronic devices, which enable, for example, the generation of non-classical light under electrical injection. A novel method to create sub-micrometer sized current-channels to efficiently feed charge carriers into single QDs is presented in this thesis. It is based on focused-laserbeam assisted thermal diffusion of manganese interstitial ions from the top GaMnAs layer into the underlying layer of resonant tunneling diode structures. The combination of the two methods investigated in this thesis may lead to new QDbased devices, where direct laser writing is employed to preselect QDs by creating localized current-channels and strain is used to fine tune their optical properties to match the demanding requirements imposed by QIP concepts.

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.

In der vorliegenden Arbeit werden die optischen Eigenschaften von dünnen PTCDA und TiOPc Schichten untersucht. Dies wurde mit der Kombination der Methoden der Molekularstrahlepitaxie (OMBE), der differentiellen Reflexionsspektroskopie (DRS) und Photolumineszenzmessungen möglich. Dabei steht der Übergang vom Einzelmolekül zum molekularen Festkörper im Mittelpunkt. Der realisierte optische Aufbau ermöglicht es, die optischen Eigenschaften von molekularen Sub- und Multilagen während der Schichtabscheidung im Ultrahochvakuum (UHV) zu bestimmen. Eine Strukturuntersuchung kann so unmittelbar darauf im UHV durchgeführt werden, ohne Umordnungsprozesse durch einen Probe-Luft-Kontakt zu riskieren. In dieser Arbeit wurden PTCDA-Schichten auf Muskovit-Glimmer(0001) und auf Au(100) untersucht. Auf Glimmer wird sehr gut ausgeprägtes Lagenwachstum gefunden, die Moleküle bilden auf dem schwach wechselwirkenden Substrat hochgeordnete epitaktische Filme. Dies ermöglichte für PTCDA, als quasi-eindimensionaler Molekülkristall, die optische Charakterisierung von Monomeren, Stapel-Dimeren und -Oligomeren während des Filmwachstums mittels DRS und Photolumineszenzmessungen. Die DRS-Messungen zeigen, daß die bekannten Festkörpereigenschaften schon bei Schichtdicken in der Größenordnung von 3-4 Gitterkonstanten ausgeprägt sind. Bis zu diesen Dicken sind die wesentlichen Änderungen in den optischen Eigenschaften zu beobachten. Ausgehend von Monomer-typischen Spektren entwickeln sich in dieser Dickenskale bereits alle Charakteristika der Festkörperspektren, wobei der Monomer-Dimerübergang die gravierendsten spektralen Änderungen hervorruft. Diese überraschende Tatsache war von den gängigen Theorien so nicht zu erwarten und ist Beleg für eine starke Wechselwirkung zwischen den dicht gepackten Molekülen. Steigen die Dimensionen des Films weiter, gibt es nur noch marginale Änderungen, die sich hauptsächlich in spektralen Verschiebungen äußern. Diese "finite-size" Effekte sind mit gängigen Theorien der Delokalisation der molekularen Anregung verträglich. Die Größe der Verschiebungen deutet jedoch darauf hin, daß gestalt- und dickenabhängige dielektrische Effekte gegenüber Delokalisierung und Confinement von Excitonen dominieren. Die veränderte Substratwechselwirkung auf der Au(100)-Oberfläche zeigt sich sowohl in verändertem Filmwachstum als auch abweichenden optischen Eigenschaften. Es wurde beobachtet, daß sich die Einflüsse durch die Substratbindung auf der Längenskala von nur einer Gitterkonstanten auswirken. Die PTCDA-Lagen, die auf dieser hybridisierten Grenzschichtlage wachsen, haben bereits die vom ungestörten System bekannten Eigenschaften. Da auf der Goldoberfläche mit zunehmender Schichtdicke das Inselwachstum (Stranski-Krastanov-Wachstum) überwiegt, verwischen die schichtabhängigen spektralen Änderungen zusehends. Für TiOPc auf Glimmer(0001) wurde bei Raumtemperatur amorphes Wachstum beobachtet, mit weniger gravierenden spektralen Änderungen. Jedoch sind auch in diesem System große dickenabhängige Verschiebungen in den Spektren festzustellen, die wie im Fall von PTCDA-Schichten hauptsächlich dielektrischen Effekten zugerechnet werden können. In TiOPc/PTCDA-Heteroschichten auf Glimmer konnte der Energietransfer vom PTCDA zum TiOPc auf molekularer Ebene, durch Löschung der PTCDA-Lumineszenz und anschließender sensibilisierter Emission des TiOPc, nachgewiesen werden. Dabei wurde bei sehr kleinen TiOPc-Schichtdicken die Emission von TiOPc-Monomeren beobachtet. Zusätzlich wurde eine dem Anion TiOPc- zuzurechnende Emission, als Indiz einer Ladungstrennung auf molekularer Ebene festgestellt. Bei größeren TiOPc-Schichtdicken tritt Exciplexemission auf, als Beleg für die starke Molekül-Molekül-Wechselwirkung an der Grenzfläche. Bei dickeren Schichten wird mit zunehmender Aggregation der TiOPc-Moleküle, die Lumineszenzausbeute durch Öffnung einer Reihe von nichtstrahlenden Rekombinationsmöglichkeiten, wie auch bei PTCDA beobachtet, geringer.