Os micro-organismos constituem um grande problema em termos econômicos para a indústria petrolífera. Estes são responsáveis pela produção de substâncias corrosivas e a formação de biofilmes, que causam deterioração dos materiais metálicos. Os principais grupos microbianos presentes em amostras ambientais da indústria do petróleo são as bactérias anaeróbias heterotróficas totais (BANHT) e as bactérias redutoras de sulfato (BRS). Atualmente, a quantificação desses grupos microbianos é realizada através da técnica do Número Mais Provável (NMP) que estima o resultado em aproximadamente 28 dias. Neste trabalho foi otimizada uma metodologia para a microscopia de fluorescência de amostras salinas provenientes de tanques de armazenamento de água/óleo. As condições testadas foram o tipo de óleo de imersão, o tipo de diluente, o volume do corante, o volume da amostra corada e a concentração do fixador (glutaraldeído) numa tentativa de correlacionar com resultados de quantificação de BANHT e BRS através da técnica convencional do NMP. Nesse caso, as células totais foram quantificadas por microscopia de fluorescência utilizando o corante fluorescente laranja de acridina (AO). Verificou-se que houve uma correlação entre os resultados da quantificação de células totais por microscopia de fluorescência e os resultados de BANHT pela técnica do NMP, devido a pouca variação de valores expressos em ambas as quantificações. Entretanto, não foi possível correlacionar os resultados da quantificação de células totais com os resultados de BRS por NMP devido à grande variação dos valores de quantificação de BRS. Na microscopia de fluorescência, foi possível, quantificar os micro-organismos em aproximadamente 30 minutos e através das fotografias, verificou-se ainda que as amostras apresentaram-se nítidas e os micro-organismos com uma boa fluorescência / Microbial cells constitute a severe problem, from the economic point of view, for the petroleum industry. They are responsible for the production of corrosive metabolites and for the formation of biofilms, causing deterioration in the surface of metallic materials. The main microbial groups present in environmental samples from the petroleum industry include total anaerobic heterothrophic bacteria (TANHB) and sulfate-reducing bacteria (SRB). Nowadays, the quantification of those microbial groups is performed through the use of the most probable number technique (MPN), providing the final quantification after 28 days. In the present work a new methodology, based on fluorescence microscopy, was optimized on saline samples from water/oil storage tanks. The conditions tested were the type of immersion oil, type of diluent, the volume of the dye, the stained sample volume and concentration of fixative (glutaraldehyde) in order to quantify total cells, in an attempt to correlate with TANHB and SRB quantification through MPN. In that case, total cells were quantified with the help of acrydine orange as fluorescent dye. It could be observed a clear correlation between the results obtained for total cells quantification by fluorescence microscopy and the results obtained for TANHB through MPN technique, due to the negligible differences observed in both quantifications. However, when a correlation with SRB cells was tried results of total cells through fluorescence microscopy did not fit entirely. With the use of fluorescence microscopy, it was possible to quantify microbial cells in around 30 minutes and with the help of photographic reports obtained, it could be observed that the samples were clearly observed and the microbial cells indicated a good fluorescence

The presented work examines the special characteristics of electricity produced by the wind as a renewable resource into which considerable hopes are being placed. Production of electricity from wind, as well as from other renewable sources, is a subject of many legislatively enshrined preferential rules. These subsidies and regulatory provisions help the energy producers but represent additional costs to every final customer and tax payer. The aim of this work is to analyse the key arguments of wind energy advocates, which are 1) economic advantage of this production due to zero costs for 'fuel' and 2) negligible burden on the environment due to zero carbon dioxide emissions. The work takes into account all aspects of wind energy production, including their financial and extra-financial implications, and shows their indefensibility in economic terms and in terms of environmental protection. Besides, I have attempted to identify institutional aspects and forms of government which is known to give interest groups a chance to succeed in their rent-seeking activities and as a result allow prosperity of the above-mentioned ineffective energy production. Attention is also paid to the observation that, given the specific technological features of electricity production from the wind, it is not possible to fully apply the conclusions of a traditional theory of economic regulation onto the current position of key players in the electricity market.

O mercado brasileiro de processamento de batata tem mostrado expressivo crescimento nos ultimos anos. No entanto, sua expansao e condicionada pelo suprimento de materia-prima adequada ao processamento industrial. As principais industrias de batata frita priorizam cultivares aptas para cada forma de processamento, pois a escolha correta da cultivar contribui para a reducao do custo de producao e para o aumento do rendimento e da qualidade do produto final. O objetivo dessa pesquisa foi estudar a eficiencia produtiva, a aptidao culinaria e as caracteristicas das cultivares de batata quando processadas na forma de palha e chips. Avaliou-se nove cultivares de batata: Agata, Almera, Arizona, Caruso, Destiny, Excelence, Fontane, Markies e Saviola. \'Agata\' e \'Almera\' foram utilizadas como cultivares nao aptas para fritura e \'Fontane\' e \'Markies\' como cultivares recomendadas para fritura. O ensaio foi conduzido no periodo de janeiro a maio de 2013, nas condicoes ambientais de Nova Resende, na regiao Sudoeste de Minas Gerais. As cultivares Arizona, Caruso, Agata e Markies exibiram o maior potencial produtivo e, junto a Saviola, a maior producao de tuberculos comerciaveis. Os teores mais elevados de materia seca foram exibidos por \'Destiny\' e \'Caruso\' (superior a 20%), seguidas por \'Excelence\', \'Fontane\' e \'Markies\' (17 a 18%). \'Caruso\' proporcionou o maior rendimento de fritura em ambas as formas de processamento. As cultivares Destiny, Excelence (ambas com cor amarela extremamente clara apos a fritura), e Caruso (cor dourada) na forma de palha; e Caruso e Destiny (cor amarela clara a dourada) na forma de chips apresentaram baixos teores de acucares redutores. Entre as cultivares avaliadas a maior eficiencia produtiva de materia-prima com aptidao para fritura foi exibida por \'Caruso\', \'Destiny\' e \'Excelence\', sendo que todas sao aptas ao processamento na forma de palha. Ja na forma de chips somente \'Destiny\' e \'Caruso\' proporcionaram fritas adequadas. / There is an increasing market for potato processing in Brazil, and the expansion of the potato industry can only be sustained if good quality product supplies of raw material are available. To reduce production costs and increase industrial efficiency, the industry must choose appropriated cultivars for each kind of product. This research investigated the tuber yield, frying aptitude, and the potato quality attributes for shoestring and chips. Nine potatoes cultivars were evaluated: Agata, Almera, Arizona, Caruso, Destiny, Excelence, Fontane, Markies and Saviola. \'Agata\' and \'Almera\' were considered unfit for frying, \'Fontane\' and \'Markies\' with frying standards. The trial ran from January to May 2013, in the south-west region of Minas Gerais State, Brazil. The cultivars Arizona, Caruso, Agata and Markies exhibited higher yield potential. These cultivars and Saviola obtained the highest marketable tubers. \'Destiny\' and \'Caruso\' showed the highest dry matter contents (higher than 20%) and were followed by \'Excelence\', \'Fontane\' and \'Markies\' (17- 18%). \'Caruso\' showed greater industrial efficiency for shoestring and chips. \'Destiny\', \'Excelence\' (extra light fries) and Caruso (medium light) for shoestring, and Caruso and Destiny (extra light to medium light) for chips showed low contents of reducing sugars. It was concluded that \'Destiny\', \'Excelence\' and \'Caruso\' outperformed all other cultivars in terms of yield. Besides, these varieties also displayed aptitude for shoestring frying. On the other hand, \'Destiny\' and \'Caruso\' were apt to frying as chips.

Os fungos de decomposição branca e parda produzem enzimas para degradar os componentes da madeira, os primeiros produzem enzimas hidrolíticas e oxidativas enquanto os outros produzem principalmente enzimas hidrolíticas. A degradação de polissacarídeos e lignina por fungos de decomposição parda e branca seletiva, respectivamente, não ocorre na região imediata à hifa, e, também, não pode ser explicada unicamente por ação enzimática devido a impermeabilidade das mesmas na parede celular. Neste trabalho estudou-se o sistema degradativo não enzimático envolvendo compostos de baixa massa molar (CBMM) redutores de ferro em fungos degradadores de madeira. O fungo de decomposição parda, Wolfiporia cocos e o de decomposição branca seletiva, Perenniporia medulla-panis foram cultivados em diferentes concentrações de ferro, e a atividade redutora de Fe3+ micelial e a extracelular, assim como a produção de quelantes específicos de ferro, como derivados de ácido hidroxâmico e de catecol, foram induzidas em condição de deficiência de ferro. Os géis de SDS-PAGE dos extratos fúngicos mostraram várias proteínas negativamente reguladas por ferro em P. medulla-panis e W. cocos, principalmente para proteínas entre 10 - 30 kDa. Quando os fungos foram cultivados em diferentes fontes de carbono simples com e sem suplementação de celulose microcristalina e deficiência de ferro, produziram CBMM redutores de Fe3+, os quais tiveram a produção estimulada nos meios com celulose. Análises de eletroforese capilar dos compostos quelantes de metal extraídos dos meios que proporcionaram a maior atividade redutora (Lornitina/ celulose para P. medulla-panis e glicose/celulose para W. cocos) na presença e ausência de ferro, confirmaram que, principalmente P. medulla-panis produz compostos extracelulares que são regulados por ferro. Os CBMM purificados das frações < 5 kDa apresentaram atividade redutora de Fe3+ em pH 2,0 mesmo quando ácido oxálico foi adicionado na concentração 20 vezes maior que a concentração de Fe3+. Em pH 4,5, a atividade redutora foi detectada até uma concentração de ácido oxálico 10 vezes superior a de Fe3+. Em ambos os casos a atividade redutora foi observada quando Fe3+ estava presente na forma livre ou complexada como Fe(oxalato)+. Dentre os vários CBMM produzidos por P. medulla-panis e W. cocos aqueles com atividade redutora foram o ácido 4-hidroxi-fenilacético, 1,2-dihidroxi-3-metil-benzeno, 1,2,3-trihidroxi-benzeno e o ácido 4- hidroxi-cinâmico para W. cocos, e para P. medulla-panis os principais foram 1,2-dihidroxibenzeno e 1,2,3-trihidroxi-benzeno. Além desses compostos, ambos os fungos produziram peptídeos de baixa massa molar com atividade redutora. Os CBMM redutores de Fe3+ de P. medulla-panis (Pmp) e de W. cocos (Wc) foram utilizados na ausência e presença de Fe3+ e H2O2 (reação de Fenton mediada) para oxidar polissacarídeos e lignina in vitro. Verificou-se que os maiores níveis de oxidação foram obtidos nas reações de Fenton mediadas (Wc-Fe3+/H2O2 e Pmp-Fe3+/H2O2). A degradação da celulose por estes sistemas foi caracterizada por uma rápida e extensiva despolimerização, seguida de significativa oxidação. Análises dos monômeros de lignina liberados de conífera tratada e não tratada após 13C-TMAH termoquimólise indicaram oxidação da lignina pelos sistemas Wc-Fe3+/H2O2 e Pmp- Fe3+/H2O2, principalmente por desmetoxilação e/ou desmetilação. A ação sinérgica entre os CBMM redutores de Fe3+ e as enzimas ligninolíticas ficou evidenciada para os fungos de decomposição branca Lentinula edodes, P. medulla-panis e Trametes versicolor através da oxidação do corante Azure B. / Brown and white rot fungi produce enzymes to degrade wood. The former produce hydrolytic and oxidative enzymes while the latter produce mainly hydrolytic enzymes. The degradation of polysaccharides and lignin by brown and white-rot fungi, respectively, do not occur next to the fungal hyphae and cannot be explained only by the enzymatic action due to the small pore size of sound wood. In this work, it was studied a non-enzymatic degradative system involving low molecular weight compounds (LMWC) with Fe3+-reducing activity in wood decay fungi. The brown rot fungus Wolfiporia cocos and the selective white rot Perenniporia medulla-panis were grown under varying concentration of iron. The micelial and extracellular Fe3+-reducing activity as well as the production of specific iron chelators (catechol and hydroxamate derivatives) were induced under iron starvation. SDS-PAGE gels of cellular proteins showed several proteins negatively iron-regulated in P. medulla-panis and in W. cocos, especially for proteins of 10 - 30 kDa. When the fungi were grown with different simple carbon source with and without microcrystalline cellulose supplementation and under iron restriction, they produced LMWC with Fe3+-reducing activity, which production was stimulated in the presence of cellulose. Capillary electrophoresis analyses of metal chelating compounds extracted from the growth media that promoted the highest Fe3+-reducing activity (L-ornithine/cellulose for P. medulla-panis and glucose/cellulose for W. cocos) in the presence and absence of iron, confirmed that, especially P. medulla-panis produces extracellular compounds that are iron-regulated. LMWC purified from these media showed Fe3+-reducing activity at pH 2.0 even when oxalic acid was added up to 20 fold the iron concentration. At pH 4.5, the Fe3+-reducing activity was detected at an oxalic acid concentration up to 10 fold the iron concentration. In both cases the LMWC were capable of reducing Fe3+ only when it was in its free form or complexed with oxalate to form Fe3+-monooxalate complex (Fe(C2O4)+). Among the several LMWC produced by P. medulla-panis and W. cocos those with Fe3+-reducing capability were 4-hydroxy-phenylacetic acid, 1,2- dihydroxy-methyl-benzene, 1,2,3-trihydroxy-benzene and 4-hydroxy-cinnamic acid to W. cocos and 1,2-dihydroxy-benzene, and 1,2,3-tri-hydroxy-benzene to P. medulla-panis. Both fungi also produce low molecular weight peptides with Fe3+-reducing capability. The purified LMWC with Fe3+-reducing activity from P. medulla-panis (Pmp) and from W. cocos (Wc) were utilized in the presence and absence of Fe3+ and H2O2 (mediated Fenton reaction) to oxidize polysaccharides and lignin in vitro. The highest oxidation levels were obtained with mediated Fenton reactions (Wc-Fe3+/H2O2 e Pmp-Fe3+/H2O2). Cellulose degradation by these systems was characterized by a rapid and extensive depolymerization followed by significant oxidation. Analyses of the lignin monomers released from treated and untreated softwood after 13C-TMAH thermochemolysis indicated lignin oxidation by the Wc-Fe3+/H2O2 and Pmp-Fe3+/H2O2 systems, mainly by demethoxylation and/or demethylation. The synergistic action between LMWC with Fe3+-reducing activity and the ligninolytic enzymes was evidenced to the white rot fungi Lentinula edodes, P. medulla-panis and Trametes versicolor with Azure B oxidation assays.

<p>Proces pečenja u proizvodnji keramičkog crepa u većini slučajeva se izvodi u<br />oksidavionoj atmosferi. Dobijena mikrostruktura koja obezbeđuje najvažnije osobine<br />primene zavisi od mineralo&scaron;kog sastava polaznog materijala i temperature termičkog<br />tretmana.<br />Sa stanovi&scaron;ta proizvodnje glinenog crepa, sirovina sa značajnim sadržajem karbonata kao &scaron;to je kop gline u Kanjiži, predstavlja problem te se ne može koristiti u njenom prirodnom sastavu. U oksidacionom termičkom tretmanu, staklasta faza koja se formira razgradnjom lakotopivih glinenih minerala ne kvasi u dovoljnoj meri zemnoalkalne okside nastale razgradnjom karbonata. Očekivane nove kristalne faze, kao &scaron;to su gelenit i anortit, koje predstavljaju osnovu dobrih tehničkih osobina crepa, ne mogu nastati u potrebnoj količini. Jedno od re&scaron;enja ovog problema je pobolj&scaron;anje interakcije između silikata i CaO/MgO promenom kvaliteta atmosfere pečenja.<br />Cilj je bio da se dobije odgovor na pitanje, da li se mogu promenom tehnolo&scaron;kih<br />parametara pečenja pobolj&scaron;ati karakteristike finalnog proizvoda dobijenog od sirovinske sme&scaron;e sa visokim masenim udelom karbonata.<br />Dati su rezultati pečenja u oksidacionoj i redukcionoj atmosferi u pogledu fizičkomehaničkih karakteristika i nastanka novih kristalnih faza. U radu su primenjene metode 57Fe M&ouml;ssbauer spektroskopije, difrakcija X zraka i dilatometrijska analiza za<br />identifikaciju promena faza tokom pečenja u oksidacionoj i redukcionoj atmosferi<br />(CO/N2 atmosfera) na temperaturama od 700-1060&deg;C. Ove promene reflektuju<br />dehidroksilaciju glinenih minerala, dekompoziciju karbonata, denzifikaciju i formiranje<br />novih kristalnih faza (plagioklasi). U cilju analize industrijskih uzoraka, pored 57Fe<br />M&ouml;ssbauer spektroskopije, primenjene su i sledeće metode: skenirajuća elektronska<br />mikroskopija (SEM) sa EDS analizom, živina porozimetrija, fotoelektronska spektroskopija (XPS) i karakterizacija apsorbcije vode, otpornosti na mraz i nosivosti.<br />Primena redukujuće atmosfere pokazala se kao opravdana, dobijen je glineni crep<br />pobolj&scaron;anih karakteristika u odnosu na standardni proizvod pečen u oksidacionoj<br />atmosferi.</p> / <p>The firing process in clay roofing tile production is normally carried out in oxidizing<br />firing atmosphere. The obtained microstructure which provides the most important<br />properties of the application depends on the mineralogical composition of the starting raw material and the firing temperature.<br />Concerning the production of roofing tiles, clay raw materials with a high content of<br />carbonates such as the Kanjiza clay material, possess an inappropriate composition. The melt phase is formed after the decomposition of clay minerals during the common firing process. This liquid phase, due to its extent wetting characteristics, is not able to wet properly the earth alkali oxides obtained after the decomposition of the carbonates. The expected new crystalline phases, like gehlenite and anorthite, which are needed for the favorable technical properties of the roofing tiles, can not be formed in the required quality and quantity. One solution to this problem is the limebonding improvement by changing the conditions of the firing atmosphere.<br />The main aim of this work is to examine the effects of firing conditions on the<br />properties of clay roofing tiles with high carbonate content. The obtained physical and<br />mechanical properties and the obtained new crystalline phases are described in detail.<br />The experiment used dilatometry, X-ray diffractometry, 57Fe M&ouml;ssbauer<br />spectroscopy to identify the changes during the firing process in oxidizing and<br />reducing atmosphere (CO/N2 atmosphere) at temperatures between 700 and 1060&deg;C.<br />Furthermore, for industrial sample analysis, scanning electronmicroscopy with EDS,<br />XPS, Hg porosimetry, water absorption procedure, frost resistance and bending<br />measurements were applied.<br />The application of reducing atmosphere was proved to be valid. The obtained<br />roofing tiles had improved properties compared to the standard production which uses<br />oxidizing firing atmosphere.</p>

<p>Background: The origin of this study was the negotiations around a EU takeover directive, aimed at making the market for corporate control more open. One of the proposals was to neutralise shares carrying multiple rights in takeover situations when a potential acquirer obtains 75% of the total share capital. For many Swedish ownership groups, this would mean that the system of unequal voting rights, constituting an important defense to their control, would decrease in effectiveness. In the middle of writing this thesis, an EU agreement was finally reached, making the proposal voluntary to adopt. The imminent threat posed to the Swedish system faded, but has though not disappeared since the present rules anew will be brought under inspection in five years. </p><p>Purpose: To give examples on potential tactics to adopt if unequal voting rights would risk to become neutralised in takeover situations, these tactics dependent on two different scenarios: (1) Present Swedish ownership structure is considered advantageous for the country and thus to be remained or (2) A more open market for takeovers is desired. Course of action: Interviews have been conducted with parties within Swedish trade and industry, partly in order to assess the value and necessity of the content of this thesis. </p><p>Conclusion: The threat of an abolition of the unequal voting rights is not perceived as imminent by parties within Swedish trade and industry and few alternative resistance strategies are suggested. If current Swedish ownership structure is to be remained, the author proposes competition-reducing defenses, if a more open market for takeovers is aimed for, auction-inducing resistance strategies. The choice of how to proceed should depend on how afraid the Swedish Government and Swedish companies are of a change in present ownership structure.</p>

The objectives of this project were to investigate the critical factors impacting the physicochemical and antibacterial properties of β-chitosan based films derived from jumbo squid (Dosidicus gigas) pens, and to evaluate the feasibility of improving water solubility of β-chitosan through Maillard reaction. The studies examined the effect of molecular weight (1,815 and 366 kDa), acid (formic, acetic, propionic, and lactic acid), and plasticizer (glycerol and sorbitol) on the film properties, as well as reducing sugar (fructose and glucosamine) and heat treatment (high temperature short time (HTST), low temperature long time (LTLT)) on water solubility of chitosan. Results on β-chitosan were compared with α-chitosan in both studies. Tensile strength (TS) and elongation (EL) of β-chitosan films were influenced by molecular weight (Mw), acid and plasticizer types (P < 0.05). High molecular weight (Hw) β-chitosan films had an overall TS of 44 MPa, 53% higher than that of low molecular weight (Lw) β-chitosan films (29 MPa) across all acid types used. The mean TS of β-chitosan acetate and propionate films (43 and 39 MPa) were higher (P < 0.05) than that of β-chitosan formate and lactate films (34 and 29 MPa). Films incorporated with plasticizer (32 MPa) had lower TS than those without plasticizer (48 MPa). Mean EL of Hw β-chitosan films was 10% versus approximately 4% in Lw β-chitosan films. Formate and acetate films had higher EL than that of propionate film. Glycerol and sorbitol increased (P < 0.001) EL 151% and 106% compared with the films without plasticizer, respectively. Water vapor permeability (WVP) of the films was affected by acid and plasticizer. Formate films (34 g mm/m² d KPa) had higher WVP than other acid films. Adding plasticizer increased (11% to 31%) WVP of propionate films except the Lw β-chitosan propionate film with sorbitol. The antibacterial activity of Lw β-chitosan and α-chitosan films delayed (P < 0.05) the proliferation of E. coli, where lactate films showed the strongest effect. The growth of L. innocua at 24 h was completely (P < 0.05) inhibited by chitosan films except Hw β-chitosan acetate film. A soft and cotton-like water soluble chitosan with mesopores was acquired after freeze-drying the Maillard reacted chitosan-sugar solution. The yield of β-chitosan-derivatives (8.48%) was 1.21 times higher than that of α-chitosan products (7.00%) (P < 0.01). Heat treatment only affected the yield of chitosan-glucosamine derivatives. Sugar type did not indicate any impact on the yield of the chitosan-derivative products in general (P > 0.05). The solubility was affected by sugar type (P < 0.01) only occurred in the β-chitosan products prepared with LTLT (P<0.05), where β-chitosan-fructose derivatives (9.56 g/L) had higher solubility than the glucosamine (5.19 g/L).LTLT treatment had given all chitosan-derivatives a higher solubility (8.44 g/L) than HTST (3.83 g/L) did (P<0.001). The results from this study demonstrated the feasibility of creating β-chitosan based film from jumbo squid pens with similar mechanical, water barrier and antibacterial properties compare to α-chitosan films as a food wrap and controlled the properties with several important factors, and developing water soluble chitosan through Maillard reaction that possess the potential as functional substance in a wider range of applications. / Graduation date: 2012

Background: The origin of this study was the negotiations around a EU takeover directive, aimed at making the market for corporate control more open. One of the proposals was to neutralise shares carrying multiple rights in takeover situations when a potential acquirer obtains 75% of the total share capital. For many Swedish ownership groups, this would mean that the system of unequal voting rights, constituting an important defense to their control, would decrease in effectiveness. In the middle of writing this thesis, an EU agreement was finally reached, making the proposal voluntary to adopt. The imminent threat posed to the Swedish system faded, but has though not disappeared since the present rules anew will be brought under inspection in five years. Purpose: To give examples on potential tactics to adopt if unequal voting rights would risk to become neutralised in takeover situations, these tactics dependent on two different scenarios: (1) Present Swedish ownership structure is considered advantageous for the country and thus to be remained or (2) A more open market for takeovers is desired. Course of action: Interviews have been conducted with parties within Swedish trade and industry, partly in order to assess the value and necessity of the content of this thesis. Conclusion: The threat of an abolition of the unequal voting rights is not perceived as imminent by parties within Swedish trade and industry and few alternative resistance strategies are suggested. If current Swedish ownership structure is to be remained, the author proposes competition-reducing defenses, if a more open market for takeovers is aimed for, auction-inducing resistance strategies. The choice of how to proceed should depend on how afraid the Swedish Government and Swedish companies are of a change in present ownership structure.

Acid mine drainage (AMD) is a worldwide environmental problem associated with the mining wastes, generated from active and inactive mining sites from mineral processing activities. AMD is defined as the drainage that occurs as a result of oxidation of sulphide minerals/wastes/tailings when exposed to air and water in the presence of chemolithotrophs namely the Acidithiobacillus sp. AMD is characterised by low pH and increased acidity due to elevated heavy metals and sulphate concentration. The acid production potential was carried out for sulphide minerals such as pyrite and chalcopyrite and copper tailings sample in the absence and presence of bacteria namely Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Acidity was generated in all the cases due to the oxidation of the mineral samples. The oxidation was found to occur at a higher rate in the presence of the bacteria compared to the control samples. Bioremediation experiments were conducted on acid mine water collected from the Ingaldahl Mines, Chitradurga, Karnataka, India, using organic and inorganic substrates. In the experiments with rice husk, complete removal of metal ions from the acid mine water was achieved with an attendant increase in the pH of the acid mine water from 2.3 to 5.5. About 21% of sulphate could be removed using Dsm. nigrificans from acid mine water pretreated with rice husk at pH 5.5 and this was further increased to 40% by the supplementation of organic components. The rice husk filtrate was found to serve as a good growth medium for Dsm. nigrificans. About 96 % of Fe, 75 % of Zn, 92 % of Cu and 41 % of sulphate removal was achieved from the acid mine water of pH 2.4 with a concomitant increase in the pH value by two units after interaction with the tree bark. About 56 % and 71 % of sulphate reduction could be achieved at initial pH values of 4.1 and 5.5 respectively of the acid mine water pretreated with E. tereticornis (Sm) bark, after inoculation with Dsm. nigrificans. The complete removal of Fe2+ and Fe3+, 80% of Zn, 83% of Cu and 62% of sulphate could be removed from acid mine water using fly ash as the substrate with an increase in pH of acid mine water from 2.3 to 7. About 68% of sulphate reduction at pH 6.8 could be achieved in acid mine water pretreated with fly ash in the presence of Dsm. nigrificans. With red mud as the substrate, complete removal of all the metal ions namely Fe2+, Fe3+, Zn, and Cu from acid mine water was achieved with a concomitant increase in the pH from 2.3 to 8. The sulphate reduction was increased to about 51% at pH 7.2 when the acid mine water pretreated with red mud was inoculated with Dsm. nigrificans. The adsorption experiments carried out on the acid mine water using either organic or inorganic substrates indicated that the free energy of adsorption was negative for all the chosen metal ions attesting to favorable interaction. The adsorption isotherms of the metal ions for rice husk exhibited Langmuirian behaviour, while those for the other substrates adhered to both Langmuir and Freundlich relationships. The adsorption process was found to be endothermic in nature for rice husk, fly ash and red mud. On the contrary, the adsorption onto tree bark showed exothermic behaviour. The adsorption kinetics of the metal ions onto the various substrates adhered to the first order Lagergren equation. The metal uptake processes by the organic and inorganic substrates chosen for this study involve ionic, chemical and physical forces of adsorption. The different types of functional groups present on the surface of the substrates such as carboxyl, hydroxyl and carbonyl, as revealed by FTIR spectroscopic studies, partake in metal binding. The metal ions will also be adsorbed by complexing with the negatively charged reaction sites on the substrate surfaces. Furthermore, the complex solution chemistry of the metals as a function of pH has also to be taken into consideration. The mechanism of sulphate reduction by Dsm. nigrificans in the presence of organic carbon can be illustrated as: 2CH2O + SO42- + 2H+  2CO2 + 2H2O + H2S M2 + H2S  MS  + 2H+ where, CH2O represents the organic matter and M represents the metal ion.

<p>Diss. (sammanfattning) Umeå : Umeå universitet, 1990, härtill 5 uppsatser.</p> / digitalisering@umu.se