Bakgrund: Patienter som vårdas enligt Lagen om Rättspsykiatrisk vård är dömda till vård. Vårdformen och de eventuella tvångsåtgärderna kan medföra att patienterna har svårt att uppleva tillit ifrån vårdpersonalen. Det är av vikt i rättspsykiatrisk vård verka för att skapa en trygg och tillitsfull vårdrelation. Syfte: Studiens syfte är att belysa aspekter som kan påverka vårdrelationen mellan patient och vårdpersonal inom rättspsykiatrisk heldygnsvård. Metod: Studien är en systematisk litteraturstudie där vetenskapliga artiklar med kvalitativ ansats söktes. Artiklar som överensstämde med studiens syfte genomgick en kvalitetsgranskning. Därefter genomfördes en kvalitativ innehållsanalys för att nå ett resultat. Resultat: Vårdrelationen inom rättspsykiatrisk vård påverkas av flera aspekter som redovisas i följande kategorier; Mötets möjligheter och svårigheter definierar vårdrelationen, Att införliva en hoppfull framtid genom att ge och ta emot stöd, Att förhålla sig till gränser med måttfullhet, Den rättspsykiatriska vårdmiljön i förhållande till vårdrelationen samt Vårdrelationens betydelse för rädsla och aggression. Slutsats: Genom en god vårdrelation kan patient tillsammans med vårdpersonal finna möjliga vägar att på ett gott sätt hantera vardagssituationer och de utmaningar som kan uppkomma. Om patienten med hjälp av den goda vårdrelationen ges möjlighet att lära om sig själv och sin sjukdom kan även andra relationer gynnas. / Background: Patients who are being cared for under Forensic Psychiatric care is ruled to this. The form of care and the possible coercive measures may lead to the difficulty of experiencing trust from the healthcare staff. It is important in Forensic Psychiatric care create a safe and trustworthy care relationship. Aim: The aim of the study is to highlight aspects that can affect the care relationship between patients and health professionals within forensic psychiatric care. Method: The study is a systematic literature review of scientific articles where articles with qualitative approach was searched. Articles that were consistent with the aim of the study underwent a quality audit based on a review template. Then a qualitative content analysis was conducted to achieve a result. Result: The care relationship in the forensic psychiatric care is influenced by several aspects that are reported in following categories; The opportunities and difficulties of the meeting define the care relationship, To incorporate a hopeful future by giving and receiving support, Relating to limits with moderation, The forensic psychiatric care environment in relation to the care relationship and The importance of care relationship to fear and aggression. Conclusion: A good care relationship between the patient and health professionals may identify possible paths to handle everyday situations and the challenges that may arise. If the patient is given the opportunity to learn about himself and his illness by means of the good care relationship, other relationships can also be benefited.

The current research was a cross sectional research and was designed to assess the performance of the selected wind power company on compliance with health and management system OHSAS 1800:2007. One wind power company in Pakistan was selected for the research purpose. To collect quantitative data survey was conducted based on Questionnaire. For finding gaps within the existing practices and also for effectiveness of the research check list was designed. Questionnaires were distributed to the employees and one check list was given to the top management. The questionnaires were distributed randomly to the employees and out of fifteen questionnaires twelve were received back. After analyzing the data from the eleven questionnaires, the results shows that overall employees are 61 % strongly agree, 30 % agree, 2% disagree and 1% strongly disagree that the requirements of the system OHSAS 18001:2007 are met. 6% did not decide about it. The check list was received from top management after analyzing data from the check list results shows that top management of the subjected wind power organization is 74% strongly agree, 23% agree and 3 % undecided about the implementation of the system OHSAS 1800: 2007. From the results it can be concluded that both employees and top management of the subjected organization are agree with the fact that the H&S system OHSAS18001:2007 is being implemented well within the organization.

The thesis deals with the issue of the formulation of new requirements to the development of new product with regard to the development of carbon-free economy and product safety improvement. The first part of the thesis describes the state of art of science and technique in the field of process management and the life cycle of a machine tool with emphasis placed on the machine tool development. The second part of the thesis includes a research of legislative requirements concerning machine safety and environmental aspects of the design of the machine to be manufactured. The practical part focuses on an analysis of key processes of the company with emphasis placed on safety and environmental friendly design processes with suggestions concerning improvement of processes with implemented sub-processes necessary for the identification and verification of safety. The thesis describes method implementation of ecodesign processes, which are presented on processes of company and demonstrated on product of drill. The thesis has practical implications for the introduction of automated sub-process of the identification and verification of safety requirements and integration of product development process in realization of ecodesign to company’s products.

The thesis deals with the issue of the formulation of new requirements to the development of new product with regard to the development of carbon-free economy and product safety improvement. The first part of the thesis describes the state of art of science and technique in the field of process management and the life cycle of a machine tool with emphasis placed on the machine tool development together with requirements and recommendations of ISO 9001:2016 – Quality Management Systems – Requirements. The second part of the thesis includes a research of legislative requirements concerning machine safety and environmental aspects of the design of the machine to be manufactured. The practical part focuses on an analysis of key processes of the company of TOS KUŘIM – OS, a.s. with emphasis placed on safety and environmental friendly design processes with suggestions concerning improvement of processes with implemented sub-processes necessary for the identification and verification of safety. A sub-process that allows for the manufacture of machines able to meet requirements of environmental friendly design is implemented to the processes. The thesis has practical implications for the introduction of automated sub-process of the identification and verification of safety requirements and implementation of the product development in the framework of future environmental friendly design development requirements to the products of TOS KUŘIM – OS, a.s.

Toute organisation est activée par un flux physique continu et un flux décisionnel qui opèrent de symbiose pour atteindre des objectifs déterminés. Ce qui engendre l’implantation d’un système d’information fiable, opérant avec un contrôle continu et une sécurité maximale, prenant en compte le contexte interne et externe pour garder son rôle opérationnel et stratégique. Compte tenu du niveau d'exposition aux risques et de la dépendance vitale des entreprises vis-à-vis de leurs systèmes d'information, il est crucial de prêter attention aux exigences de sécurité. La réalisation d'un équilibre entre la sécurité et l'efficacité du système d’information est une tâche complexe qui exige au préalable une analyse approfondie du contexte organisationnel. Elle nécessite également l'identification, l'analyse, et la gestion des risques encourus par l’entreprise. Elle nécessite aussi la détermination des exigences de sécurité. Peu d'approches offrent un guidage permettant de dériver les exigences de sécurité à partir des risques encourus. Le but de cette thèse est de concevoir un mécanisme de guidage suggestif qui permet de dériver les exigences de sécurité à partir de l'analyse des risques. Nous proposons, pour cela, une approche fondée sur une ontologie modulaire et un ensemble de règles de correspondance. A cette fin, nous proposons le développement de quatre ontologies et un processus d'alignement entre celles-ci en utilisant des relations sémantiques cohérentes. Le processus de validation se fonde sur une étude de cas et un prototype. / Any organization is enabled by continuous physical flow and decision flow from operating symbiosis to achieve specific objectives. Which generates the implementation of a reliable information system, operating with a continuous control and maximum security, taking in to account the internal and external environment to maintain its operational and strategic role. Given the level of risk exposure and the vital dependence of companies on their information systems, it is crucial to pay attention to security requirements. Achieving a balance between the security and effectiveness of the information system is a complex task requiring an in-depth analysis of the organizational context. It also requires the identification, analysis, and management of the risks incurred by the company. It also requires the determination of security requirements. Few approaches offer guidance to derive security requirements from the risks involved. The aim of this thesis is to design a suggestive guiding mechanism that allows to derive the security requirements from the risk analysis. We propose an approach based on a modular ontology and a set of correspondence rules. To achieve, we propose the development of four ontologies and an alignment process between then using consistent semantic relationships. The validation process is based on a case study and a prototype.

The master thesis treats the design of control system of special purpose machine tool. The first part analyzes and compares two possible variants of control system which use either a CNC control system Sinumerik or motion control system Simotion. Only the variant with the Simotion control system is subsequently examined in detail: its hardware configuration, the selection of components and partly also the software solution. The thesis further deals with the safety of the realized control system and of the whole machine. There are described general safety requirements of machinery based on harmonized European standards and their specific application in the design of safety functions and the safety circuits of solved machine tool.

Subject of this master´s thesis is project planning and management of construction of Apartment building in Brno. This thesis involves engineering report, block plan and block plan drawing, time schedulings, project of site equipment, design of machine formation, technological regulation of eartworks and nailig wall, test plan of eartworks and nailig wall, work safety for rough structure and budget of rough structure.

Le concept de « risques psychosociaux au travail » rassemble plusieurs phénomènes de souffrance liés au travail. Ces risques se réfèrent à la fois aux actes porteurs de souffrance et aux expressions de cette souffrance sur la santé des salariés. Malgré sa formulation, ce concept renvoie à des événements qui portent atteinte tant à la santé psychique que physique des travailleurs. Ces atteintes d’origine professionnelle ont pour trait commun leur caractère avant tout social. En effet, les risques psychosociaux sont principalement causés par des organisations du travail, des méthodes de management ou des relations interpersonnelles néfastes. Si l’expression de risques psychosociaux a émergé hors du champ juridique, elle est désormais communément utilisée en droit pour traiter des questions de santé et de sécurité au travail. L’appréhension juridique de ces risques n’est pourtant pas évidente. Ceux-ci sont difficiles à délimiter, teintés de subjectivité et peu enclins à être appréhendés au vu de l’histoire du droit social. Toutefois, le droit est de plus en plus sensible à l’appréhension des différentes dimensions de la personne du salarié. En outre, si la consécration des risques psychosociaux en tant que catégorie juridique est marginale, les événements auxquels renvoie ce concept sont saisis par les textes de droit nationaux et extranationaux ainsi que par la jurisprudence. Dès lors, les dispositifs et solutions juridiques applicables aux relations de travail de droit privé sont en capacité de prévenir ces risques, de les sanctionner ou de les réparer. À ce titre, une multitude d’acteurs internes ou externes à l’entreprise sont en capacité d’agir face à ces risques. / The concept of "psychosocial risks at work" gathers several work-related suffering risks. These risks are, at the same time, related to the generating acts of pain and to the expressions of suchpain on employees’ health. Despite its formulation, this concept refers to events affecting both mental and physical health of workers. Such affecting events share the same social ground. Indeed, psychosocial risks are mainly caused by the companies’ organization themselves, management methods or harmful relationships. Even though the expression of psychosocial risks was formerly developed out of the legal environment, it is now generally used in law to deal with issues of health and safety at work. However, the comprehensive understanding of such risks is not yet obvious from a legal perspective. These are complicated to define and delimit, tinged with subjectivity and unlikely to be understood in light of the employment law history. However, law is increasingly taking into account the different dimensions of the workers’ individuality. Also, if the psychosocial risks fail to be recognized, so far, as an independent and entire legal concept, both laws (domestic and international) and case law are more and more referring to it. Therefore, measures and legal solutions applicable to the working relationships in private companies enable to prevent such risks, punish or compensate them. As such, a wide range of people, whether related or not to the company, are able to duly face these factors.

The content of this thesis is the construction project of technological multifunctional building new locality Nitra the Slovak Republic. Individual points outline the project, which are dealt with in this thesis can be divided into subcategories, depending on the type of information provided. The first category can include items such as a technical report to the STP, which describes the basic information about the objects constructed building including the construction situation, location of the site including links to transport and technical infrastructure and rough timetable for the construction of all buildings. The second category can include no specific calculation and optimization outputs such as itemized budget polyfunctional house SO-07.03, drawing of the site including all buildings proposed site and their economic evaluation, sizing of utilities for supplying water and electricity construction site, design of building machines and mechanisms including determining the time of deployment, technological regulation for the implementation of monolithic roof structure, including financial balance sheets prepared by the deployment of slab formwork. The last category included in the thesis are legislative requirements that must be observed and kept in the course of the construction plan is constructed as a safety and health at work, including security risks drawn up, inspection and testing schedule for monolithic construction and a list of environmental risks that may arise during implementation.