本研究的目的為研究台灣省在1990年之15-17歲的在學率，在找出可能影響因素並蒐集好相關的資料後，我們將蒐集到的資料分成兩個部份，一個部份用來建造模型，而另一個部份則用來測試所建立出來的模型。主要的過程是：先利用簡單迴歸模型了解各個可能的因素對於15-17歲的在學率的影響程度，經過許多分析及了解後再對這些變數採取可能的變數轉換(variable transformations)，而後再利用三種常用的統計迴歸方法﹝包含有逐步迴歸(stepwise regression)方法、前進選擇(forward selection)方法以及後退消除(backward elimination)方法﹞去發展出一個適當的複迴歸模型(multiple regression model)。對於這個模型，以實際的台灣在學情況來看，我們看不出它有任何的不合理；同時也利用圖形及檢定去驗證模型的假設，其次還做有關迴歸參數的推論(inferences about regression parameters)。再其次，我們運用變異數分析的結果(analysis of variance results)以及新觀察值的預測情形(predictions of new observations)來評估模型的預測能力。最後並利用所得到的最適當的模型，對如何提昇15-17歲青少年的在學率給予適當的建議。 / The objective of this research is to study what factors may affect the schooling rates of 15-17 years old in Taiwan province in 1990. After finding out some possible factors and collecting those data regarding those factors, we separate the data (by stratified random sampling) into two sets. One set is used to construct the model, and the other set shall be used to test the model. The main process to build a regression model is as follows. First, we shall use simple linear regression models to help us to see if each factor may have relation with the schooling rates. With the analysis of residuals and so on, we then make appropriate transformations on each of these factors. Finally, we use three common statistical regression techniques (including stepwise regression, forward selection, and backward elimination methods) to develop a suitable multiple regression model. It seems that, by our understanding of schooling rates in Taiwan, this model is not unreasonable. In addition, we verify the assumptions of the model by graphical methods and statistical tests. We also do the inferences about regression parameters. Furthermore, ye use the results of the analysis of variance and predictions of new observations to evaluate the prediction ability of the model. Finally, we use the most appropriate multiple regression model to give some suggestions to improve (or keep) the schooling rates of 15-17 years old.

This doctoral study aims to develop a methodology for use in determining aerodynamic models and parameters from actual flight test data for different types of autonomous flight vehicles. The stepwise regression method and equation error method are utilized for the aerodynamic model identification and parameter estimation. A closed loop aerodynamic parameter estimation approach is also applied in this study which can be used to fine tune the model parameters. Genetic algorithm is used as the optimization kernel for this purpose. In the optimization scheme, an input error cost function is used together with a final position penalty as opposed to widely utilized output error cost function. Available methods in the literature are developed for and mostly applied to the aerodynamic system identification problem of piloted aircraft / a very limited number of studies on autonomous vehicles are available in the open literature. This doctoral study shows the applicability of the existing methods to aerodynamic model identification and parameter estimation problem of autonomous vehicles. Also practical considerations for the application of model structure determination methods to autonomous vehicles are not well defined in the literature and this study serves as a guide to these considerations.

迴歸模式的變數選取是很重要的課題，Tibshirani於1996年提出最小絕對壓縮挑選機制（Least Absolute Shrinkage and Selection Operator；簡稱Lasso），主要特色是能在估計的過程中自動完成變數選取。但因為Lasso本身並沒有牽扯到統計推論的層面，因此2014年時Lockhart et al.所提出的Lasso顯著性檢定是重要的突破。由於Lasso顯著性檢定的建構過程與傳統向前逐步迴歸相近，本研究接續Lockhart et al.(2014)對兩種變數選取方法的比較，提出以Bootstrap來改良傳統向前逐步迴歸；最後並比較Lasso、Lasso顯著性檢定、傳統向前逐步迴歸、以AIC決定變數組合的向前逐步迴歸，以及以Bootstrap改良的向前逐步迴歸等五種方法變數選取之效果。最後發現Lasso顯著性檢定雖然不容易犯型一錯誤，選取變數時卻過於保守；而以Bootstrap改良的向前逐步迴歸跟Lasso顯著性檢定一樣不容易犯型一錯誤，而選取變數上又比起Lasso顯著性檢定更大膽，因此可算是理想的方法改良結果。 / Variable selection of a regression model is an essential topic. In 1996, Tibshirani proposed a method called Lasso (Least Absolute Shrinkage and Selection Operator), which completes the matter of selecting variable set while estimating the parameters. However, the original version of Lasso does not provide a way for making inference. Therefore, the significance test for lasso proposed by Lockhart et al. in 2014 is an important breakthrough. Based on the similarity of construction of statistics between Lasso significance test and forward selection method, continuing the comparisons between the two methods from Lockhart et al. (2014), we propose an improved version of forward selection method by bootstrap. And at the second half of our research, we compare the variable selection results of Lasso, Lasso significance test, forward selection, forward selection by AIC, and forward selection by bootstrap. We find that although the Type I error probability for Lasso Significance Test is small, the testing method is too conservative for including new variables. On the other hand, the Type I error probability for forward selection by bootstrap is also small, yet it is more aggressive in including new variables. Therefore, based on our simulation results, the bootstrap improving forward selection is rather an ideal variable selecting method.

This study investigates the association between traditional and alternative working capital measures and the returns of industrial firms listed on the Johannesburg Stock E"change. Twenty five variables for all industrial firms listed for the most recent 10 years were derived from standardised annual balance sheet data of the University of Pretoria's Bureau of Financial Analysis. Traditional liquidity ratios measuring working capital position, activity and leverage, and alternative liquidity measures, were calculated for each of the 135 participating firms for the 1 0 years. These working capital measures were tested for association with five return measures for every firm over the same period. This was done by means of a chi-square test for association, followed by stepwise multiple regression undertaken to quantify the underlying structural relationships between the return measures and the working capital measures. The results of the tests indicated that the traditional working capital leverage measures, in particular, total current liabilities divided by funds flow, and to a lesser e"tent, long-term loan capital divided by net working capital, displayed the greatest associations, and e"plained the majority of the variance in the return measures. At-test, undertaken to analyse the size effect on the working capital measures employed by the participating firms, compared firms according to total assets. The results revealed significant differences between the means of the top quartile of firms and the bottom quartile, for eight of the 13 working capital measures included in the study. A nonparametric test was applied to evaluate the sector effect on the working capital measures employed by the participating firms. The rank scores indicated significant differences in the means across the sectors for si" of the 13 working capital measures. A decrease in the working capital leverage measures of current liabilities divided by funds flow, and long-term loan capital divided by net working capital, should signal an increase in returns, and vice versa. It is recommended that financial managers consider these findings when forecasting firm returns. / Business Management / D. Com. (Business Management)

Made available in DSpace on 2014-06-11T19:22:31Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-08-27Bitstream added on 2014-06-13T18:49:27Z : No. of bitstreams: 1 silva_mr_me_ilha.pdf: 2058535 bytes, checksum: 046bcb6196cc4909e675190cc0e21275 (MD5) / Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) / O estudo da confiabilidade operacional de equipamentos se tornou fundamental para as empresas possuírem o devido controle dos seus ativos, tanto pelo lado financeiro quanto em questões de segurança. O estudo da taxa de falha de equipamentos prevê quando as falhas irão ocorrer possibilitando estabelecer atitudes preventivas, porém, seu estudo deve ser realizado em condições de operação estabelecidas e fixas. Os medidores de energia elétrica, parte do ativo financeiro das concessionárias de energia, são equipamentos utilizados em diversas condições de operação, tanto nas condições do fluxo de energia, tais como presenças de harmônicos, subtensões, sobre-tensões e padrões de consumo distintos, quanto pelo local físico de instalação, tais como maresia, temperatura, umidade, etc. As falhas nos medidores eletromecânicos de energia elétrica são de difícil constatação uma vez que a maioria dos erros de medição, ocasionados principalmente por envelhecimento de componentes, não alteram a qualidade da energia fornecida e nem interrompem o seu fornecimento. Neste sentido, este trabalho propõe uma nova metodologia de determinação de falhas em medidores eletromecânicos de energia elétrica ativa. Faz-se uso de banco de dados de uma concessionária de energia elétrica e do processo de descoberta de conhecimento em bases de dados para selecionar as variáveis mais significativas na determinação de falhas em medidores eletromecânicos de energia elétrica ativa, incluindo no conjunto de falhas a operação com erros de medição acima do permitido pela legislação nacional (2010). Duas técnicas de mineração de dados foram utilizadas: regressão stepwise e árvores de decisão. As variáveis obtidas foram utilizadas na construção de um modelo de agrupamento de equipamentos associando a cada grupo uma probabilidade... / The operational reliability study of equipments has become primal in order to enterprises have the righteous control over their assets, both by financial side as by security reasons. The study for the hazard rate of equipments allows to foresee the failures for the equipments and to act preventively, but this study must be accomplished under established and fixed operation conditions. The energy meters, for their part, are equipments utilized in several operating conditions so on the utilization manner, like presence of harmonics, undervoltages and over-voltages and distinct consumption patterns, as on the installation location, like swel, temperature, humidity, etc. Failures in electromechanical Wh-meters are difficult to detect once that the majority of metering errors occurred mainly by aging of components do not change the quality of offered energy neither disrupt its supply. In this context, this work proposes a novel methodology to obtain failure determination for electromechanical Whmeters. It utilizes Wh-databases from an electrical company and of the process of knowledge discovery in databases to specify the most significant variables in determining failures in electromechanical Wh-meters, including in the failure set the operation with metering errors above those permitted by national regulations (2010). Two techniques of data mining were used in this work: stepwise regression and decision trees. The obtained variables were utilized on the construction of a model of clustering similar equipments and the probability of failure of those clusters were determined. As final results, an application in a friendly platform were developed in order to apply the methodology, and a case study was accomplished in order to demonstrate its feasibility.

No description available.

Worker fatigue has been the focus of research for many years. However, there is limited research available on the evaluation and measurement of fatigue for prolonged mentally demanding activities. The objectives of the study are (1 )to evaluate fatigue for prolonged, mentally demanding work-tasks by considering task-dependent, task-independent and personal factors, (2) to identify effective subjective and objective fatigue measures, (3) to establish a relationship between time and factors that affect fatigue (4) to develop models to predict fatigue. A total of 16 participants, eight participants with western cultural backgrounds and eight participants with eastern cultural backgrounds, currently employed in mentally demanding work-tasks (e.g., programmers, computer simulation experts, etc.) completed the study protocols. Each participant was evaluated during normal working hours in their workplace for a 4-hour test session, with a 15-minute break provided after two hours. Fatigue was evaluated using subjective questionnaires (Borg Perceived Level of Fatigue Scale and the Swedish Occupational Fatigue Index (SOFI)); and objective measures (change in resting heart rate and salivary cortisol excretion). Workload was also assessed using the NASA-TLX. Fatigue and workload scales were collected every 30 minutes, cortisol at the start and finish of each 2-hour work block, and heart rate throughout the test session. Fatigue significantly increased over time (p-value <0.0001). All measures, except cortisol hormone, returned to near baseline level following the 15-minute break (p-value <0.0001). Ethnicity was found to have limited effects on fatigue development. Poor to moderate (Rho = 0.35 to 0.75) significant correlations were observed between the subjective and objective measures. Time and fatigue load (a factor that impacts fatigue development) significantly interact to explain fatigue represented by a hyperbolic relationship. Predictive models explained a maximum of 87% of the variation in the fatigue measures. As expected, fatigue develops over time, especially when considering other factors that can impact fatigue (e.g. hours slept, hours of work), providing further evidence of the complex nature of fatigue. As the 15-minute break was found to reduce all measures of fatigue, the development of appropriate rest breaks may mitigate some of the negative consequences of fatigue.

Bankruptcy prediction is an important research topic. The cost of incorrect decision making in companies and financial institutions can be great and could affect large parts of society. But while it is indeed a major research area, there are few studies which consider the effects of feature selection. This is an important step that could improve the performance of bankruptcy prediction models. This thesis therefore aims to find which feature selection methods perform best for bankruptcy prediction. Five feature selection methods will be compared and used to create datasets with fewer redundant features. To test these methods, a LSTM model is used to train on both an unaltered dataset and datasets created by the mentioned models. The predictive performance of these are then compared with the metrics AUC, Type I error, and Type II error. This study finds that the forward selection algorithm from the Stepwise regression method performed best with an increase in AUC score and decrease in both Type I and Type II error rates compared to the model trained on the unaltered dataset.

Die studie vergelyk die prestasie van 'n koop-en-hou-strategie met die van 'n tydsberekeningstrategie binne die raamwerk van die arbitrasie-prysbepalingsteorie (APT) op die nywerheidsindeks van die Johannesburgse Aandelebeurs (JA). Die periode van die studie is oor twee tydperke, naamlik Januarie 1970 tot September 1987 en Januarie 1989 tot Junie 1997. Die langtermyntendens van die nywerheidsindeks en APT-faktore is bepaal deur die beste nie-reglynige model vir elke tydreeks te vind. Reglynige meervoudige stapsgewyse regressie-ontleding is gebruik om die bewegings van die nywerheidsindeks rondom die langtermyntendens te voorspel. Die sloeringsreekse van die langtermyntendensresidutelling van die APT-faktore en die sloeringsreekse van die eerste-ordeverskiltelling van die langtermyntendensresidutelling is as moontlike voorspellers gebruik. Gegrond hierop is beslissingslyne ontwik:kel wat gebruik is vir die implementering van 'n tydsberekeningstrategie. Die resultate van die studie is die volgende: • Waar die sloeringsreekse van die langtermyntendensresidutelling van die APTfaktore as moontlike voorspellers gebruik is, is die risiko-aangepaste opbrengskoers van 'n tydsberekeningstrategie 6, 41 persent en 0, 71 persent b6 die van 'n koop-en-hou-strategie vir tydperk een en twee onderskeidelik. • Waar die sloeringsreekse van die eerste-ordeverskiltelling van die langtermyntendensresidutelling van die APT-faktore as moontlike voorspellers gebruik is, is die risiko-aangepaste opbrengskoers van 'n tydsberekeningstrategie 10,40 persent en 1,04 persent b6 die van 'n koop-enhou- strategie vir tydperk een en twee onderskeidelik. Die belangrikste gevolgtrekking van die studie is dat die APT en 'n tydsberekeningstrategie teoreties en prakties versoenbaar is op die JA. Aanbevelings vir toekomstige navorsing is die volgende: ( 1) sistematiese risikofaktore, anders as makro-ekonomiese faktore, behoort identifiseer te word wat die voorspellingswaarde van die faktore in die tweede tydperk van die studie kan verhoog; (2) elke stap van die model wat ontwikkel is, behoort op elke indeks van die JA toegepas te word om die risiko-aangepaste opbrengskoers van 'n tydsberekeningstrategie toegepas op elkeen van die indekse met die van 'n koop-en-hou-strategie te vergelyk; en (3) die invloed van transaksiekoste en dividende op die potensiele voordele van tydsberekening moet bepaal word. / The study compares the performance of a buy-and-hold strategy with that of a markettiming strategy in the framework of the arbitrage pricing theory (APT) applied to the industrial index of the Johannesburg Stock Exchange (JSE). The study period is divided into two parts, namely January 1970 to September 1987 and January 1989 to June 1997. The long-term trend of the industrial index and every APT factor is determined by finding the best nonlinear model for each time series. Linear multiple stepwise regression analysis, with the lagged time series of the long-term trend error terms of the APT factors, is used to forecast the movement of the industrial index around its long-term trend. Decision lines were developed to implement a market-timing strategy. The results of the study are as follows: • Where the lagged time series of the long-term trend error terms of the APT factors were used as possible predictors, the risk-adjusted return of a markettiming strategy was 6, 41 percent and 0, 71 percent higher than that of a buyand- hold strategy for periods one and two respectively. • Where the lagged time series of the first-order difference of the long-term trend error term of the APT factors were used as possible predictors, the riskadjusted return of the market-timing strategy was 10,40 percent and 1,04 percent higher than that of a buy-and-hold strategy for periods one and two respectively. The main conclusion of the study is that the APT and a market-timing strategy are theoretically and practically reconcilable on the JSE. The main recommendations of the study are the following: (1) systematic risk factors, other than macroeconomic factors, should be identified in order to increase the forecasting value of these factors in the second period of the study; (2) each step of the model developed in this study should be repeated on every index of the JSE; and (3) the influence of transaction costs and dividends on the potential benefits of a market-timing strategy should be determined. / Business Management / DCom (Sakebestuur)

Die studie vergelyk die prestasie van 'n koop-en-hou-strategie met die van 'n tydsberekeningstrategie binne die raamwerk van die arbitrasie-prysbepalingsteorie (APT) op die nywerheidsindeks van die Johannesburgse Aandelebeurs (JA). Die periode van die studie is oor twee tydperke, naamlik Januarie 1970 tot September 1987 en Januarie 1989 tot Junie 1997. Die langtermyntendens van die nywerheidsindeks en APT-faktore is bepaal deur die beste nie-reglynige model vir elke tydreeks te vind. Reglynige meervoudige stapsgewyse regressie-ontleding is gebruik om die bewegings van die nywerheidsindeks rondom die langtermyntendens te voorspel. Die sloeringsreekse van die langtermyntendensresidutelling van die APT-faktore en die sloeringsreekse van die eerste-ordeverskiltelling van die langtermyntendensresidutelling is as moontlike voorspellers gebruik. Gegrond hierop is beslissingslyne ontwik:kel wat gebruik is vir die implementering van 'n tydsberekeningstrategie. Die resultate van die studie is die volgende: • Waar die sloeringsreekse van die langtermyntendensresidutelling van die APTfaktore as moontlike voorspellers gebruik is, is die risiko-aangepaste opbrengskoers van 'n tydsberekeningstrategie 6, 41 persent en 0, 71 persent b6 die van 'n koop-en-hou-strategie vir tydperk een en twee onderskeidelik. • Waar die sloeringsreekse van die eerste-ordeverskiltelling van die langtermyntendensresidutelling van die APT-faktore as moontlike voorspellers gebruik is, is die risiko-aangepaste opbrengskoers van 'n tydsberekeningstrategie 10,40 persent en 1,04 persent b6 die van 'n koop-enhou- strategie vir tydperk een en twee onderskeidelik. Die belangrikste gevolgtrekking van die studie is dat die APT en 'n tydsberekeningstrategie teoreties en prakties versoenbaar is op die JA. Aanbevelings vir toekomstige navorsing is die volgende: ( 1) sistematiese risikofaktore, anders as makro-ekonomiese faktore, behoort identifiseer te word wat die voorspellingswaarde van die faktore in die tweede tydperk van die studie kan verhoog; (2) elke stap van die model wat ontwikkel is, behoort op elke indeks van die JA toegepas te word om die risiko-aangepaste opbrengskoers van 'n tydsberekeningstrategie toegepas op elkeen van die indekse met die van 'n koop-en-hou-strategie te vergelyk; en (3) die invloed van transaksiekoste en dividende op die potensiele voordele van tydsberekening moet bepaal word. / The study compares the performance of a buy-and-hold strategy with that of a markettiming strategy in the framework of the arbitrage pricing theory (APT) applied to the industrial index of the Johannesburg Stock Exchange (JSE). The study period is divided into two parts, namely January 1970 to September 1987 and January 1989 to June 1997. The long-term trend of the industrial index and every APT factor is determined by finding the best nonlinear model for each time series. Linear multiple stepwise regression analysis, with the lagged time series of the long-term trend error terms of the APT factors, is used to forecast the movement of the industrial index around its long-term trend. Decision lines were developed to implement a market-timing strategy. The results of the study are as follows: • Where the lagged time series of the long-term trend error terms of the APT factors were used as possible predictors, the risk-adjusted return of a markettiming strategy was 6, 41 percent and 0, 71 percent higher than that of a buyand- hold strategy for periods one and two respectively. • Where the lagged time series of the first-order difference of the long-term trend error term of the APT factors were used as possible predictors, the riskadjusted return of the market-timing strategy was 10,40 percent and 1,04 percent higher than that of a buy-and-hold strategy for periods one and two respectively. The main conclusion of the study is that the APT and a market-timing strategy are theoretically and practically reconcilable on the JSE. The main recommendations of the study are the following: (1) systematic risk factors, other than macroeconomic factors, should be identified in order to increase the forecasting value of these factors in the second period of the study; (2) each step of the model developed in this study should be repeated on every index of the JSE; and (3) the influence of transaction costs and dividends on the potential benefits of a market-timing strategy should be determined. / Business Management / DCom (Sakebestuur)