Utbildningen av officerare är omdiskuterad och har kanske alltid varit det. Men de senaste årens förändringar av officersutbildningen och akademisering av yrket samt ändrade befälsstrukturer i Försvarsmakten (FM) har återigen satt fart på diskussionen. Det handlar bland annat om FM får den officer som man behöver för att kunna bygga starka krigsförband och om officeren har de kvalifikationer som detta kräver? Men vad är officersyrket för något och vad är det egentligen FM vill ha? Studien undersöker just det, vad en officer är och vilka egenskaper som en officer förväntas att ha med sig in i yrket.  Utbildningen vid Försvarshögskolan (FHS) Officersprogrammet (OP) är det som skall leda till en officer med rätt kvalifikationer och egenskaper vilket leder till den andra delen av studien, där bilden av vad en officer är jämförs med de examensmål som programmet har. Dessa examensmål framgår av förordningen för FHS och med de 17 examensmålen examinerade så skall kadetten vara klar att påbörja sitt yrke som officer. Frågan är om den förutsättningen verkligen finns?   För att kunna göra denna jämförelse har studien, genom intervjuer, tagit fram en modell av en officer från det unika med officersprofessionen, våldsmonopolet, via antagningskrav för utbildningen till egenskaper som officeren måste ha och roller som officeren utövar. Modellen har två portalparagrafer som är att betrakta som en sammanställning, vilka studien anser är nödvändiga för att hantera de mest allvarliga frågor som i förlängningen kan innebära beslut om liv eller död.  Portalparagraferna är mångsidighet och en väl utvecklad inre kompass.   I jämförelsen mellan modellen och examensmålen har studien funnit att examensmålen är avmilitariserade och har en teoretisk slagsida. Den väpnande striden har kommit i skymundan och officerares ansvar för det statliga våldsmonopolet inte finnsmed. De tydliggör inte heller en del av de egenskaper och kvalifikationer, som studien har visat, är nödvändiga för att officeren som ledare ska kunna hantera yrkesprofessionen och axla det ansvar detta kräver. Det gör att kadetten inte fullt ut får den möjlighet att bli den officer som FM behöver.   Studien visar bland annat att examensmålen bör ses över och kanske även till del skrivas om. / The training of military officers is well debated and has always been. But the recent years' changes in officer training and the academisation of the profession and also changed command structures in the Swedish Armed Forces (SAF) have once again set the stage for discussion. Among other things, it is about SAF getting the officer they need to build strong units and whether the officer has the qualifications that this requires? But what is the profession as an officer and what does the SAF really wants? The study examines just that, what is a military officer and what qualities an officer is expected to bring into the profession.  The education at the Swedish National Defense University (SDU) and the military officers’ program (OP) is the education, which should lead to a profession as an officer with the right qualifications and characteristics. This leads to the second part of the study, where the image of an officer is compared to the exam objectives for the program. These exam objectives are stated in the ordinance for SDU, and with the 17 exam objectives examined; the cadet should be ready to begin his profession as an officer. The question is whether this condition really exists?  In order to make this comparison, the study, through interviews, has developed a model of an officer from the unique with the profession, the monopoly of violence, via admission requirements for the education, to characteristics that the officer must have and roles that the officer exercises. The model has two portal paragraphs that are a compilation of the model, which the study considers necessary to deal with the most serious issues that may ultimately involve decisions on life or death.   The portal paragraphs are versatility and a well-developed inner moral guidance.  In the comparison between the model and the exam objectives, the study found that the objectives are demilitarized and have a theoretical approach. The armed battle is overshadowed and the officers' responsibility for the state monopoly of violence is not included. Nor do they clarify some of the characteristics and qualifications that the study has shown are necessary for the officer to be able to manage the profession as a leader and shoulder the responsibility this requires. This means that the cadet does not fully get the opportunity to become the officer that SAF needs.  The study shows, among other things, that the exam objectives should be reviewed and perhaps even partly rewritten.

Afrikaans text / Hierdie navorsing handel oar die verwantskap tussen prestasiemotivering en interpersoonlike style. Die konsepte wat in die navorsing beskryf word, is prestasiemotivering (vanuit 'n humanistiese raamwerk} en selfgelding, responsiwiteit en aanpasbaarheid (vanuit 'n behavioristiese raamwerk). Die gekose meetinstrumenter naamlik, die Bestuursmotiefvraelys vir prestasiemotivering en die lnterpersoonlike Verhoudingsvraelys vir interpersoonlike style, is op 'n steekproef van 155 middelvlakbestuurders wat die senior takseersentrum binne 'n semi-staatsdiens organisasie deurloop het, afgeneem. Die resultate is verwerk deur middel van korrelasie en regressie (enkelvoudig en meervoudig) tegnieke. Die korrelasie.:.analise het getoon dat daar 'n statisties betekenisvolle korrelasie bestaan tussen prestasiemotivering en selfgelding. Die enkelvoudige regressie-analise het getoon dat selfgelding, responsiwiteit en aanpasbaarheid 'n invloed op prestasiemotivering uitoefen. Die korrelasie- en regressie-analise dui daarop dat responsiwiteit en aanpasbaarheid 'n negatiewe invloed uitoefen op prestasiemotivering. 'n Moontlike voorspellingsmodel vir prestasiemotivering is nie ontwikkel nie, aangesien die integriteit van die resultate betwyfelword. / Hierdie navorsing handel oar die verwantskap tussen prestasiemotivering en interpersoonlike style. Die konsepte wat in die navorsing beskryf word, is prestasiemotivering (vanuit 'n humanistiese raamwerk} en selfgelding, responsiwiteit en aanpasbaarheid (vanuit 'n behavioristiese raamwerk). Die gekose meetinstrumenter naamlik, die Bestuursmotiefvraelys vir prestasiemotivering en die lnterpersoonlike Verhoudingsvraelys vir interpersoonlike style, is op 'n steekproef van 155 middelvlakbestuurders wat die senior takseersentrum binne 'n semi-staatsdiens organisasie deurloop het, afgeneem. Die resultate is verwerk deur middel van korrelasie en regressie (enkelvoudig en meervoudig) tegnieke. Die korrelasie.:.analise het getoon dat daar 'n statisties betekenisvolle korrelasie bestaan tussen prestasiemotivering en selfgelding. Die enkelvoudige regressie-analise het getoon dat selfgelding, responsiwiteit en aanpasbaarheid 'n invloed op prestasiemotivering uitoefen. Die korrelasie- en regressie-analise dui daarop dat responsiwiteit en aanpasbaarheid 'n negatiewe invloed uitoefen op prestasiemotivering. 'n Moontlike voorspellingsmodel vir prestasiemotivering is nie ontwikkel nie, aangesien die integriteit van die resultate betwyfelword. / This research deals with the relationship between achievement motivation and interpersonal styles. The concepts achievement motivation (from a humanistic point of view} and assertiveness, responsiveness and versatility {from a behavioristic point of view), have been described in this research. The chosen measuring instruments, namely the Management Motive questionnaire for achievement motivation and the Interpersonal Relations questionnaire for interpersonal styles, were administered by means of sampling a group of 155 from middle management who participated in the senior assessment centre in a semi-government organisation. The results were processed by using correlation and regression (simple and multiple) techniques. The correlation analysis showed significant statistical correlation between achievement motivation and assertiveness. The single regression analysis indicated that assertiveness, responsiveness and versatility have an influence on achievement motivation. The correlation and regression analysis showed that responsiveness and versatility impact negatively on achievement · motivation. The possible prediction model for achievement motivation has not been developed due to the integrity of the results being doubtful!. / Industrial and Organisational Psychology / MCOM (Bedryfsielkunde)

Le potentiel adaptatif d’une espèce peut être défini par sa capacité à faire face aux changements environnementaux. Le potentiel adaptatif augmente avec la variation du phénotype, du niveau intra-individuel au niveau inter-populations. Cependant, les facteurs qui contrôlent et expliquent cette variation phénotypique sont encore relativement peu compris. Nous avons étudié quatre espèces végétales des îles Kerguelen, en subantarctique, une des régions les plus sévèrement affectée par le changement climatique. Les espèces végétales des îles Kerguelen montrent un fort degré d’intégration phénotypique (i.e. forte corrélation entre les traits), suggéré comme étant une contrainte pour la variation des traits. Chez ces espèces, nous avons étudié les facteurs qui peuvent contraindre la variation phénotypique : les facteurs environnementaux extrinsèques, l’intégration phénotypique intrinsèque et les coûts associés de performance. Nous avons montré que la variation intra-individuelle, i.e. plasticité, peut être contrainte par la modification simultanée de multiple facteurs environnementaux, et par les coûts de performance qui en résultent. En revanche, la plasticité peut être favorisée par un fort degré d’intégration phénotypique (Chapitre 3). Nous avons montré que la variation interindividuelle, à l’intérieur des populations, n’était pas contrainte par des facteurs environnementaux, mais pouvait cependant être favorisée par un fort degré d’intégration phénotypique (Chapitre 1). Egalement, nous avons trouvé que la variation inter-populations à l’intérieur d’une région peut être contrainte par une variation environnementale limitée (Chapitre 1). Finalement, nous avons étudié des métabolites secondaires (amines et flavonols) qui font le lien entre variation environnementale et variation phénotypique. Nous avons trouvé que la composition et la fonction de ces métabolites varient entre régions, suggérant une différentiation évolutive entre régions (Chapitre 2). Les patrons de variation entre régions, suggèrent au niveau intra-spécifique une redondance et une versatilité fonctionnelle des métabolites, que nous somme, à notre connaissance, les premiers à mettre en évidence. Nous suggérons que le changement climatique des îles Kerguelen va avoir un impact négatif sur la performance des espèces végétales. La persistance d’habitats humides favorables à ces espèces sera alors un facteur déterminant de la capacité des espèces à faire face au changement climatique. De plus, ce projet a permis d’identifier des facteurs jusqu’alors peu reconnus qui pourtant favorisent le potentiel adaptatif des espèces. En particulier, le potentiel adaptatif peut être favorisé par (i) le degré d’intégration phénotypique (contrairement à ce qui est communément suggéré) et (ii) la redondance et la versatilité des métabolites (qui a peu été étudiée jusqu’alors). Qui plus est, nous avons mis en évidence pour la première fois, plusieurs coûts et limites de la plasticité, suggérant qu’une réponse plasticité de la plante n’est pas une garantie de succès dans le nouvel environnement. / The adaptive potential of a species can be defined as its capacity to cope with environmental change. Adaptive potential increases with phenotypic variation, from the intra-individual to the inter-population level, but factors controlling and explaining this variation still remain poorly understood.We studied four plant species from Iles Kerguelen in the sub-Antarctic region which is currently facing one of the strongest climate changes worldwide. Plant species from Iles Kerguelen are known to show high phenotypic integration (i.e. strong correlation among traits), a phenomenon that has been suggested to constrain trait variation. For these species we studied what constrains phenotypic variation, considering the external environment, the internal phenotypic integration and the associated performance costs. We found that intra-individual variation, i.e. plasticity, may be constrained by complex environmental change and the performance costs it triggers. In contrast, plasticity may be favored by high degree of phenotypic integration (Chapter 3). We found that inter-individual variation within populations may not be constrained by environmental factors, but may be favored by high phenotypic integration (Chapter 1). We found inter-population variation within regions may be constrained by restricted environmental variation (Chapter 1). Finally, we studied secondary metabolites (amines and flavonols) that connect environmental variation to phenotypic variation. We found that compositions and functions of these metabolites vary among regions, probably reflecting evolutionary differentiation among regions (Chapter 2). Patterns of variation betweenregions suggest that within species metabolites may be functionally redundant or versatile, for which to our knowledge our results are the first hint. Overall, we suggest that climate change in Kerguelen will impact plant species performance, and that the persistence of suitable wet habitats will be determinant in species capacities to cope with such changes. Furthermore, this project identified so far underestimated factors which may favor the adaptive potential of species. Particularly, we emphasize that the adaptive potential of species may increase due to (i) phenotypic integration, (contrary to common suggestion) and (ii) metabolite redundancy or versatility (only poorly studied so far). Moreover, we evidenced, partly for the first time, multiple costs and limits of plasticity and suggest that plasticity does not guarantee plant success in the new environment.

The modern trombone player can experience a variety of styles on any given day. There is a need for the ability to switch between a plethora of styles ranging from avant-garde pieces to many forms of popular music to masterworks of the symphonic repertoire. It is the responsibility of the musician (performer or educator) to be familiar with all music due to global access via the internet. There is a responsibility to properly perform and respect music as more composers are beginning to blend different styles, genres, idioms, and cultures within the same composition. Daniel Schnyder is a prominent continuation of this style of musical collage that began with composers such as George Rochberg, Luciano Berio, Bernd Alois Zimmermann, and Charles Ives. The goal of this project is to analyze the stylistic saturation of Daniel Schnyder's Worlds Beyond Suite, focusing on performance and stylistic analysis to aid in an informed performance. This project will highlight the flexibility required by modern trombonists to perform with a deeper understanding of music in multiple styles, as the blending, juxtaposing, and superimposition of style is the universal future of music.

The research in this report seeks to develop a highly flexible geometry station for joining futureBody-in-White (BiW) assemblies. The goal is to eliminate the need for a complete reconstructionof a production line during integration of new car bodies in a contemporary production.Today's BiW production is performed in sequential lines, where joining equipment is arranged ina specific order for each model geometry. An increasing model portfolio forces manufacturers todevelop production systems that allow an integration of new models. Electrified alternatives ofexisting models are now developed and put into production. These models have similarappearance as conventional models, but with a completely different principle of driveline due tothe propulsion. This means that new interfaces and platforms have to be developed and mustnow be integrated into a current production. Today's production lines are not prepared forcoming changes, and current stations can only handle a limited number of variants. Integration ofnew geometries into a contemporary production line is not sufficiently efficient from aproduction perspective. The goal of the future is to make such an integration possible.Initially, current and future production scenarios were studied. Based on this, four types ofproduction scenarios, which a highly flexible geometry station can be integrated into, were set up.An integration can take place in different ways depending on how a highly flexible geometrystation is compounded, therefore, different cases were created and compared in a case study.Internal and external benchmarking of production systems were made to compare the availablesolutions for increasing stations flexibility in a BiW production.As reference for the project, a concept for a highly flexible geometry station has been developedand is therefore described initially before an additional depth has been realized. The furtherconceptualization of a highly flexible geometry in this report is presented in the form of amorphological composition of technologies that can increase a station's flexibility, as well asvisualization of a station principles through layouts and cycle time charts. The result of theanalysis generated several concepts that hold different degrees of capacity, footprint andflexibility. The focus was to achieve a high level of flexibility for integration of new models, withnew geometries, in a current production. The conclusion was that the highly flexible geometrystation can, in a contemporary production, produce independently in low volumes. Alternatively,produce higher volumes when it is integrated as a complement in a novel, not yet implemented,production concept. / Forskningen i denna rapport syftar till att utveckla en högflexibel geometristation för fogning avkommande Body-in-White-karosser (BiW). Målet är att eliminera behovet av en fullständigrekonstruktion av en produktionslinje under integrering av nya bilar i en samtida produktion.Dagens BiW-produktion sker i sekventiella liner, där fogningsutrustning är arrangerad i enspecifik ordning för respektive modellgeometri. Ett ökande antal modellalternativ drivertillverkare till att utveckla produktionskoncept som möjliggör integration av nya modeller.Elektrificerande alternativ till befintliga modeller utvecklas kontinuerligt. Dessa modeller ärutseendemässigt lika de konventionella modellerna, men med en helt annan princip för drivlina.Det innebär att nya gränssnitt och plattformar har tagits fram och måste nu integreras i ennuvarande produktion. Dagens produktionslinjer är inte förberedda för kommande förändringaroch nuvarande geometristationer kan endast hantera ett begränsat antal karosstyper. Integrationav nya karosstyper i en befintlig produktionslinje är inte är tillräckligt effektivt ur ettproduktionsperspektiv. Framtidens mål är att göra en sådan integration möjlig.Inledningsvis studerades nuvarande- och kommande produktionsscenarion. Utifrån det beskrevsfyra produktionstyper, vilket en högflexibel geometristation kan komma att integreras i. Enintegration kan ske på olika vis beroende på hur en högflexibel geometristation tillämpas, därförjämfördes olika fall av det i en Case-studie. En intern och extern benchmarking avproduktionssystem gjordes för att jämföra de lösningar som finns för att öka flexibiliteten i enBiW-produktion.Som referensunderlag till projektet har ett koncept för en högflexibel geometristation tagits framoch är beskrivet inledningsvis innan en ytterligare fördjupning har realiserats.Konceptualiseringen av en högflexibel geometristation i denna rapport är presenterad i form aven morfologisk sammansättning av teknologier som kan öka en stations flexibilitet, samtvisualisering av en principiell station genom layouter och cykeltidsdiagram. Resultatet av analysengenererade flera koncept som innehar olika grad av kapacitet, fabriksyta och flexibilitet. Fokus varatt uppnå en hög flexibilitetsnivå för integration av nya modeller, med nya geometrier, i ennuvarande produktion. Slutsatsen var att den högflexibla geometristationen kan, i en nutidaproduktion, producera självständigt i låga volymer. Alternativt producera högre volymer då denintegreras som ett komplement till ett ännu inte implementerat nytt produktionskoncept. / Die Forschung in diesem Bericht zielt darauf ab, eine hochflexible Geometrie-Station für das Fügen zukünftiger Rohbau-Baugruppen zu entwickeln. Das Ziel ist es, die Notwendigkeit einer vollständigen Rekonstruktion einer Produktionslinie während der Integration neuer Karosserien in einer modernen Produktion zu beseitigen. Die heutige Rohbau Produktion wird in sequenziellen Linien durchgeführt, wobei die einzelnen Fügeverfahren in einer bestimmten Reihenfolge, angepasst an die jeweilige Modellgeometrie, angeordnet sind. Ein zunehmendes Modellportfolio zwingt die Automobilhersteller zur Entwicklung von Produktionssystemen, die eine Integration neuer Modelle ermöglichen. Elektrifizierte Varianten bestehender Fahrzeugmodelle werden nun entwickelt und in Produktion gebracht. Diese Modelle haben ein ähnliches Erscheinungsbild wie herkömmliche Modelle, jedoch mit einem stark veränderten Antriebskonzept. Dies bedeutet, dass neue Schnittstellen und Plattformen entwickelt wurden und nun in eine aktuelle Produktion integriert werden müssen. Heutige Produktionslinien sind nicht auf kommende Änderungen vorbereitet und können nur eine begrenzte Anzahl von Varianten handhaben. Die Integration neuer Geometrien in eine moderne Produktionslinie ist aus Produktionssicht nicht effizient, aber soll in Zukunft das Ziel sein. Zunächst wurden aktuelle und zukünftige Produktionsszenarien untersucht. Darauf aufbauend wurden vier Arten von Produktionsszenarien erarbeitet, in die eine hochflexible Geometriestation integriert werden kann. Je nach Aufbau der Geostation kann eine Integration auf unterschiedliche Art und Weise erfolgen. Daher wurden in einer Fallstudie unterschiedliche Fälle erstellt und verglichen. Ein Benchmarking mit internen und externen Produktionssystemen wurde durchgeführt, um eine größtmöglichste Flexibilität der Stationen in einer Rohbau Produktion zu erzielen. Als Referenz für das Projekt wurde ein Konzept für eine hochflexible Geometriestation entwickelt und im Rahmen der Thesis dokumentiert, bevor eine zusätzliche Tiefe realisiert wurde. Die weitere Konzeptionierung einer hochflexiblen Geometrie-Station wird in Form einer morphologischen Zusammensetzung von Technologien präsentiert. Dieser kann die Flexibilität einer Station erhöhen und zudem die Visualisierung von Stationsprinzipien, beispielsweise durch Layouts oder Zykluszeitdiagramme, fördern. Das Ergebnis der Analyse erzeugte mehrere vi Konzepte, die unterschiedliche Grade an Kapazität, Grundfläche und Flexibilität beinhalteten. Der Fokus lag auf einer hohen Flexibilität bei der Integration neuer Modelle mit neuen Geometrien in einer aktuellen Produktion. Die Schlussfolgerung war, dass die hochflexible Geometriestation in einer zeitgemäßen Produktion in kleinen Stückzahlen produzieren kann. Alternativ ist die Geo-Station auch als Bestandteil eines noch umzusetzenden Produktionskonzepts integrierbar.

L’approche de la carrière criminelle a été appliquée à maintes reprises auprès de délinquants sexuels afin d’approfondir les connaissances relatives à leur participation criminelle, à la fréquence de leur passage à l’acte, à la durée de leur parcours criminel, à la gravité de leurs crimes et au polymorphisme dont ces délinquants font preuve. Parallèlement à l’essor des nouvelles technologies, un besoin grandissant d’en apprendre davantage sur la carrière criminelle des auteurs de leurre informatique s’est fait ressentir. À ce jour, peu d’études ont analysé le parcours criminel emprunté par ces cyberdélinquants sexuels en ayant recours au cadre d’analyse de la carrière criminelle. Afin de remédier à cette limite, le présent mémoire a comme objectif principal d’analyser les parcours criminels des auteurs de leurre informatique afin d’élargir les connaissances quant à la participation, la fréquence, la durée, la gravité et le polymorphisme. Plus précisément, l’objectif spécifique est d’analyser les tendances en termes de carrières criminelles. Pour ce faire, une analyse de profils latents a été menée auprès d’un échantillon de 1 201 auteurs de leurre. Les résultats indiquent l’existence de divers parcours criminels des auteurs de leurre et mettent en lumière quatre profils, soit (1) l’auteur de leurre « ponctuel à délinquance unique », (2) l’auteur de leurre « versatile tardif », (3) l’auteur de leurre « délinquant sexuel spécialiste » et (4) l’auteur de leurre « polymorphe prolifique ». Le premier profil identifié est composé d’auteurs de leurre ne commettant qu’un seul crime à travers leur parcours criminel selon les données officielles. Le second profil, pour sa part, regroupe les individus commettant plusieurs crimes sexuels et non sexuels et qui mettent fin tardivement à leur carrière criminelle. Ensuite, le troisième profil identifié comprend les auteurs ayant un penchant pour les crimes de sexuels, bien que leur carrière criminelle soit limitée en termes de participation et de fréquence. Dernièrement, le quatrième profil est constitué d’auteurs polymorphes commettant une variété de crimes sexuels et non sexuels. / The criminal career approach has been extensively applied in the context of sexual delinquency and allowed to deepen knowledge regarding the crimes committed by sex offenders, the duration of their criminal involvement, the seriousness of their criminal behaviors, and the variety of crimes they commit. Along with the rise of new technologies, there has been a growing need to learn more about the criminal careers of online groomers. To date, no studies have analyzed the criminal path of these online sex offenders using a criminal career framework. To remedy this limitation, the main objective of this paper is to analyze the criminal paths of online groomers as to broaden knowledge on participation, frequency, duration, seriousness, and versatility. Specifically, the objective is to identify tendencies in regards to their criminal careers. To do so, a latent profile analysis was performed on a sample of 1 201 online groomers. The results support the existence of multiple delinquent paths of individuals who sexually solicit youth online and highlight the existence of four profiles: (1) the “one-timer” groomer, (2) the “versatile and late” groomer, (3) the “specialist sex offender” groomer, and (4) the “versatile and prolific” groomer. The first profile identified consists of online groomers committing a single crime across their criminal path. The second profile includes individuals who commit multiple sexual and non-sexual crimes and who end their criminal career belatedly. The third identified profile includes perpetrators with a preference for sexual crimes, but whose criminal careers are limited in terms of participation and frequency. Lastly, the fourth profile is composed of versatile offenders committing a variety of sexual and non-sexual crimes.

This dissertation is interested in what kind of self and techniques of resistance are acquired in order to be a revolutionary in the contemporary West. While I was conducting an ethnographic research between 2008 - 2015 following young activists from Germany in urban spaces of demonstrations, riots, direct actions, jails, the Internet, universities, housing projects, parent's homes in Germany as well as during solidarity trips to Mexico, Argentina, Israel/Palestine, Denmark or Italy, it was discovered that a concept of political versatility may be helpful here. Young revolutionaries are what I call revolutionary amoebas. Revolutionary amoebas acquire capacities to discuss at universities or public debates, write texts, talk, but they manage to argue beyond the discourse by throwing stones or burning cars in riots, organizing direct actions, smashing corporate properties, beating neo­nazis, attacking ultra­nationalists, or actively defending themselves against the police. As citizens of advanced liberal democracy, they enter public discussions of contested opinions, persuade people with their critical arguments and a few of them even vote, but they as well explore the political terrain considered illegal. Many of them know how to get funded from the state, The EU,...

This dissertation is interested in what kind of self and techniques of resistance are acquired in order to be a revolutionary in the contemporary West. While I was conducting an ethnographic research between 2008 - 2015 following young activists from Germany in urban spaces of demonstrations, riots, direct actions, jails, the Internet, universities, housing projects, parent's homes in Germany as well as during solidarity trips to Mexico, Argentina, Israel/Palestine, Denmark or Italy, it was discovered that a concept of political versatility may be helpful here. Young revolutionaries are what I call revolutionary amoebas. Revolutionary amoebas acquire capacities to discuss at universities or public debates, write texts, talk, but they manage to argue beyond the discourse by throwing stones or burning cars in riots, organizing direct actions, smashing corporate properties, beating neo­nazis, attacking ultra­nationalists, or actively defending themselves against the police. As citizens of advanced liberal democracy, they enter public discussions of contested opinions, persuade people with their critical arguments and a few of them even vote, but they as well explore the political terrain considered illegal. Many of them know how to get funded from the state, The EU,...

The basic idea of this paper is to outline a cross-curricular approach between mathematics and science. The aim is to close the often perceived gap between formal maths and authentic experience and to increase the students’ versatility in the use of mathematical terms. Students are to experience maths as logical, interesting and relevant through extra-mathematical references. Concrete physical or biological correlations may initiate mathematical activities, and mathematical terms are to be understood in logical contexts. Examples: physical experiments can lead to a comprehensive understanding of the concept of functions and of the intersection of medians in triangles. Biological topics can lead to the concepts of similarity and proportion as well as to the construction of pie charts. In the European ScienceMath Project a variety of teaching modules was developed and tested in secondary schools.

The basic idea of this paper is to outline a cross-curricular approach between mathematics and science. The aim is to close the often perceived gap between formal maths and authentic experience and to increase the students’ versatility in the use of mathematical terms. Students are to experience maths as logical, interesting and relevant through extra-mathematical references. Concrete physical or biological correlations may initiate mathematical activities, and mathematical terms are to be understood in logical contexts. Examples: physical experiments can lead to a comprehensive understanding of the concept of functions and of the intersection of medians in triangles. Biological topics can lead to the concepts of similarity and proportion as well as to the construction of pie charts. In the European ScienceMath Project a variety of teaching modules was developed and tested in secondary schools.