This work is focused on the study of luminescence of atomic thin layers of transition metal chalkogenides (eg. MoS2). In the experimental part, the work deals with the preparation of atomic thin layers of semiconducting chalcogenides and the subsequent manufacturing of plasmonic interference structures around these layers. The illumination of the interference structure will create a standing plasmonic wave that will excite the photoluminescence of the semiconductor. Photoluminescence was studied both by far-field spectroscopy and near-field optical microscopy.

<div>Surface level molecules act as an interface that mediates between the surface and the environment. In this way, interfacial molecules are responsible for conferring characteristics of relevance to many modern material science problems, such as electrical conductivity and wettability. For many applications, such as organic photovoltaics and nanoelectronics, macroscopic placement of chemical patterns at the sub-10 nm must be achieved to advance next generation device applications.</div><div><br></div><div>In the work presented here, we show that sub-10 nm orthogonal features can be prepared by translating the building principles of the lipid bilayer into striped phase lipids on 2D materials (e.g. highly ordered pyrolytic graphite (HOPG), MoS2). Macroscopic patterning of these nanoscopic elements is achieved via Langmuir Schafer deposition of polymerizable diyne amphiphiles. On the Langmuir trough, amphiphiles at the air water interface are ordered into features that can be observed on the macroscale using Brewster angle microscopy. Upon contact of the 2D material with the air-water interface the macroscopic pattern on the trough is transferred to the 2D material creating a macroscopic pattern consisting of sub-10 nm orthogonal chemistries. We also show here how hierarchical ordering can be accomplished via noncovalent microcontact printing of amphiphiles onto 2D materials. Microcontact printing allows a greater measure of control over the placement and clustering of interfacial molecules.</div><div><br></div><div>The alkyl chain/surface enthalpy has a great deal of influence over the ordering of amphiphiles at the sub-nm scale. Here, we examine this influence by depositing diyne amphiphiles onto MoS2 which has a weaker alkyl adsorption enthalpy compared to HOPG. We found that dual-chain amphiphiles deposited on MoS2 adopt a geometry that maximized the molecule-molecule interaction compared to the geometry adopted on HOPG.</div><div><br></div><div>Finally, we show how the hierarchical pattern of diyne amphiphiles can be transferred off of the 2D material onto an amorphous material. This is done by reacting the amorphous material with the conjugated backbone of the diyne moiety through a hydrosilylation reaction to exfoliate the film from the 2D crystalline material. The resulting polymer ‘skin’ has many applications were controlling interfacial properties of an amorphous material is important.</div>

La microscopie optique sur substrats antireflets est un outil de caractérisation simple et puissant qui a notamment permis l'isolation du graphène en 2004. Depuis, le domaine d'étude des matériaux bidimensionnels (2D) s'est rapidement développé, tant au niveau fondamental qu'appliqué. Ces matériaux ultraminces présentent des inhomogénéités (bords, joints de grains, multicouches, etc.) qui impactent fortement leurs propriétés physiques et chimiques. Ainsi leur caractérisation à l'échelle locale est primordiale. Cette thèse s'intéresse à une technique récente de microscopie optique à fort contraste, nommée BALM, basée sur l'utilisation originale de couches antireflets très minces (2-5 nm) et fortement absorbantes (métalliques). Elle a notamment pour but d'évaluer les mérites de cette technique pour l'étude des matériaux 2D et de leur réactivité chimique. Ainsi, les différents leviers permettant d'améliorer les conditions d'observation des matériaux 2D ont tout d'abord été étudiés et optimisés pour deux matériaux modèles : l'oxyde de graphène et les monocouches de MoS₂. L'étude de la dynamique de dépôt de couches moléculaires a notamment permis de montrer à la fois l'extrême sensibilité de BALM pour ce type de mesures et l'apport significatif des multicouches antireflets pour l'augmentation du contraste lors de l'observation des matériaux 2D. L'un des atouts principaux de BALM venant de sa combinaison à d'autres techniques, nous nous sommes particulièrement intéressés au couplage de mesures optiques et électrochimiques pour lesquelles le revêtement antireflet sert d'électrode de travail. Nous avons ainsi pu étudier optiquement la dynamique de réduction électrochimique de l'oxyde de graphène (GO), l'électro-greffage de couches minces organiques par réduction de sels de diazonium sur le GO et sa forme réduite (r-GO), ainsi que l'intercalation d'ions métalliques entre feuillets de GO. En combinant versatilité et fort-contraste, BALM est ainsi établi comme un outil prometteur pour l'étude des matériaux 2D et en particulier pour la caractérisation locale et in situ de leur réactivité chimique et électrochimique. / Optical microscopy based on anti-reflective coatings is a simple yet powerful characterization tool which notably allowed the first observation of graphene in 2004. Since then, the field of two-dimensional (2D) materials has developed rapidly both at the fundamental and applied levels. These ultrathin materials present inhomogeneities (edges, grain boundaries, multilayers, etc.) which strongly impact their physical and chemical properties. Thus their local characterization is essential. This thesis focuses on a recent enhanced-contrast optical microscopy technique, named BALM, based on ultrathin (2-5 nm) and strongly light-absorbing (metallic) anti-reflective layers. The goal is notably to evaluate the benefits of this technique for the study of 2D materials and their chemical reactivity. The various levers to improve 2D materials observation were investigated and optimized for two model materials: graphene oxide and MoS₂ monolayers. The investigation of molecular layer deposition dynamic notably showed the extreme sensitivity of BALM for such measurements and the significant contribution of multilayers anti-reflective coatings to enhance contrast during the observation of 2D materials. One of the main assets of BALM comes from its combination to other techniques. We particularly considered the coupling between optical measurements and electrochemistry for which the anti-reflective layer serves as working electrode. We investigated optically the dynamic of electrochemical reduction of Graphene Oxide (GO), the electrografting of organic layers by diazonium salts reduction on GO and its reduced form (rGO), as well as the intercalation of metallic ions within GO sheets. By combining versatility and high-contrast, BALM is established as a promising tool for the study of 2D materials, especially for the local and in situ characterization of their chemical and electrochemical reactivity.

In this work, the crystal growth as well as structural and magnetic investigations of several metal trichalcogenides compounds with a general formula M2X2Ch6 are presented. M stands for a main group metal or transition metal, X is an element of the IV or V main group and Ch is a chalcogen. In particular, these compounds are the phosphorus sulfides Fe2P2S6, Ni2P2S6 as well as intermediate compounds of the substitution regime (Fe1-xNix)2P2S6, the quarternary phosphorus sulfides CuCrP2S6 and AgCrP2S6 and the germanium tellurides Cr2Ge2Te6 and In2Ge2Te6. As members of the metal trichalcogenides, all these compounds have a van der Waals layered honeycomb structure in common. This layered structure in combination with their magnetic properties makes these compounds interesting candidate materials for the production of magnetic monolayers by exfoliation from bulk crystals. Crystals of the phosphorus sulfides were grown by the chemical vapor transport technique and, for the growth of the germanium tellurides, the self-flux growth technique was used. Crystals of all phases were extensively characterized regarding their morphology, chemical composition and homogeneity as well as regarding their crystal structure. The structural analysis, especially for Ni2P2S6, yields insight into details of the stacking order and disorder of the corresponding quasi-two-dimensional layers in the bulk. Regarding the magnetic properties, both Fe2P2S6 and Ni2P2S6 order antiferromagnetically but exhibit different magnetic anisotropies (i.e. Ising-like anisotropy for Fe2P2S6 and XYZ anisotropy for Ni2P2S6). In this context, it is surprising to find that compounds in the solid solution regime of (Fe1-xNix)2P2S6 up to x = 0.9 exhibit an anisotropic magnetic behavior that is comparable to Fe2P2S6 and, thus, indicative of Ising-like anisotropy. For CuCrP2S6 and AgCrP2S6, the ordering of the two different transition elements on the honeycomb sites yields more complex magnetic structures. The magnetic Cr3+ atoms in CuCrP2S6 order in a triangular arrangement and form an antiferromagnetic ground state with notable ferromagnetic interactions. AgCrP2S6 exhibits pronounced features of low dimensional magnetism resulting from the (quasi-)one-dimensional stripe-like arrangement of magnetic Cr3+ atoms and no onset of long-range magnetic order is unambiguously observed. Cr2Ge2Te6 exhibits ferromagnetic order and an anisotropic feature in the temperature dependence of the magnetization. Based on the magnetic phase diagrams for two orientations between the magnetic field and the crystallographic directions, the temperature dependence of the magnetocrystalline anisotropy constant as well as the critical exponents of the magnetic phase transition are extracted. Concluding from this, the magnetic interactions in Cr2Ge2Te6 are dominantly of two-dimensional nature and the anisotropy is uniaxial with the before mentioned anisotropic feature resulting from the interplay between magnetocrystalline anisotropy, magnetic field, and temperature. In2Ge2Te6 is diamagnetic as to be expected for a closed-shell system. Additional to the investigations on single crystals, the quasi-binary phase diagram of (Cu1-xAgx)CrP2S6 was investigated for regimes of solid solution behavior based on polycrystalline samples. Accordingly, isostructural substitution is most likely possible in the composition range of (Cu0.25Ag0.75)CrP2S6 to AgCrP2S6, potentially allowing to tune the magnetic interactions of the Cr sublattice indirectly by substitution on the Cu/Ag sublattice.:1. Introduction 1.1. M2X2Ch6 Class of Materials 1.2. Magnetism in Solid State Materials 1.2.1. Diamagnetism 1.2.2. Paramagnetism 1.2.3. Cooperative Magnetism 1.2.4. Magnetic Anisotropy 1.2.5. Magnetism in D < 3 1.2.6. Critical Exponents 2. Methods 2.1. Synthesis and Crystal Growth 2.1.1. Solid State Synthesis 2.1.2. Crystal Growth via the Liquid Phase 2.1.3. Crystal Growth via the Vapor Phase 2.2. X-ray Diffraction 2.2.1. Single Crystal X-ray Diffraction 2.2.2. Powder X-ray Diffraction 2.3. Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy 2.3.1. Scanning Electron Microscopy 2.3.2. Energy Dispersive X-ray Spectroscopy 2.4. Magnetometry 2.5. Nuclear Magnetic Resonance Spectroscopy 2.6. Specific Heat Capacity 3. M2P2S6 3.1. Ni2P2S6 3.1.1. Crystal Growth 3.1.2. Characterization 3.1.3. Magnetic Properties 3.1.4. 31P-NMR Spectroscopy 3.1.5. Stacking (Dis-)Order in Ni2P2S6 3.2. (Fe1-xNix)2P2S6 3.2.1. Synthesis and Crystal Growth 3.2.2. Characterization 3.2.3. Evolution of Magnetic Properties 3.3. Summary and Outlook 4. M1+CrP2S6 4.1. CuCrP2S6 4.1.1. Crystal Growth 4.1.2. Characterization 4.1.3. Magnetic Properties 4.2. AgCrP2S6 4.2.1. Crystal Growth 4.2.2. Characterization 4.2.3. Magnetic Properties 4.3. Polycrystalline (Cu1-xAgx)CrP2S6 4.3.1. Synthesis 4.3.2. Phase Analysis 4.4. Summary and Outlook 5. M2(Ge,Si)2Te6 5.1. Cr2Ge2Te6 5.1.1. Crystal Growth 5.1.2. Characterization 5.1.3. Magnetic Properties 5.1.4. Analysis of the Critical Behavior 5.2. In2Ge2Te6 5.2.1. Crystal Growth 5.2.2. Characterization 5.2.3. Magnetic Properties 5.2.4. Specific Heat 5.3. Summary and Outlook 6. Conclusion Bibliography List of Publications Acknowledgements Eidesstattliche Erklärung A. Appendix A.1. Scanning Electron Microscopic Images A.1.1. (Fe1-xNix)2P2S6 A.2. scXRD A.2.1. (Fe1-xNix)2P2S6 / In dieser Arbeit werden die Kristallzüchtung sowie strukturelle und magnetische Untersuchungen an mehreren Metalltrichalkogenid-Verbindungen mit der allgemeinen Summenformel M2X2Ch6 vorgestellt. M steht für ein Hauptgruppen- oder Übergangsmetall, X ist ein Element der IV- oder V-Hauptgruppe und Ch ein Chalkogen. Insbesondere handelt es sich bei diesen Verbindungen um die Phosphorsulfide Fe2P2S6, Ni2P2S6 sowie um Verbindungen der Substitutionsreihe (Fe1-xNix)2P2S6, die quaternären Phosphorsulfide CuCrP2S6 und AgCrP2S6 sowie die Germaniumtelluride Cr2Ge2Te6 und In2Ge2Te6. Als Mitglieder der Metalltrichalkogenide haben alle diese Verbindungen eine van-der-Waals-Schichtstruktur mit Honigwabenmotiv gemein. Diese Schichtstruktur in Kombination mit ihren magnetischen Eigenschaften macht diese Verbindungen zu interessanten Kandidaten für die Herstellung von magnetischen Monolagen durch Exfoliation aus Volumenkristallen. Kristalle der Phosphorsulfide wurden mit der chemischen Dampfphasentransporttechnik gezüchtet und für die Züchtung der Germaniumtelluride wurde die Selbstflusstechnik verwendet. Die Kristalle aller Phasen wurden sowohl hinsichtlich ihrer Morphologie, chemischen Zusammensetzung und Homogenität als auch hinsichtlich ihrer Kristallstruktur umfassend charakterisiert. Die Strukturanalyse, insbesondere für Ni2P2S6, gibt Aufschluss über Details der Stapelordnung und -unordnung der entsprechenden quasizweidimensionalen Schichten im Volumen. Bezüglich der magnetischen Eigenschaften ordnen sowohl Fe2P2S6 als auch Ni2P2S6 antiferromagnetisch, zeigen aber unterschiedliche magnetische Anisotropien (d.h. Ising-artige Anisotropie für Fe2P2S6 und XYZ-Anisotropie für Ni2P2S6). In diesem Zusammenhang ist es überraschend, dass Verbindungen im Mischkristallregime von (Fe1-xNix)2P2S6 bis x = 0.9 ein anisotropes magnetisches Verhalten zeigen, das mit dem von Fe2P2S6 vergleichbar ist und daher auf Ising-artige Anisotropie hindeutet. Bei CuCrP2S6 und AgCrP2S6 führt die Anordnung der beiden unterschiedlichen Übergangselemente auf den Gitterplätzen der Wabenstruktur zu komplexeren magnetischen Strukturen. Die magnetischen Cr3+ Atome in CuCrP2S6 ordnen sich in einer Dreiecksanordnung an und bilden einen antiferromagnetischen Grundzustand mit ausgeprägten ferromagnetischen Wechselwirkungen. AgCrP2S6 weist deutliche Merkmale von niederdimensionalem Magnetismus auf, welche aus der (quasi-)eindimensionalen, streifenartigen Anordnung der magnetischen Cr3+ Atome resultieren, und das Einsetzen von langreichweitiger magnetischer Ordnung kann nicht eindeutig beobachtet werden. Cr2Ge2Te6 weist ferromagnetische Ordnung und einen anisotropen Verlauf der Temperaturabhängigkeit der Magnetisierung auf. Anhand von magnetischen Phasendiagrammen für zwei Orientierungen zwischen Magnetfeld und kristallographischen Richtungen wurden die Temperaturabhängigkeit der magnetokristallinen Anisotropiekonstante sowie die kritischen Exponenten des magnetischen Phasenübergangs extrahiert. Hieraus ergibt sich, dass die magnetischen Wechselwirkungen in Cr2Ge2Te6 überwiegend zweidimensionaler Natur sind und die Anisotropie uniaxial ist, wobei der zuvor erwähnte anisotrope Verlauf aus dem Zusammenspiel von magnetokristalliner Anisotropie, Magnetfeld und Temperatur resultiert. In2Ge2Te6 ist diamagnetisch, wie es für ein System mit geschlossener Schale zu erwarten ist. Zusätzlich zu den Untersuchungen an Einkristallen wurde das quasibinäre Phasendiagramm von (Cu1-xAgx)CrP2S6 anhand von polykristallinen Proben auf Bereiche mit Mischkristallverhalten hin untersucht. Folglich ist eine isostrukturelle Substitution höchstwahrscheinlich im Zusammensetzungsbereich von (Cu0.25Ag0.75)CrP2S6 bis AgCrP2S6 möglich, was es erlauben könnte, die magnetischen Wechselwirkungen des Cr-Untergitters indirekt durch Substitution auf dem Cu/Ag-Untergitter zu beeinflussen.:1. Introduction 1.1. M2X2Ch6 Class of Materials 1.2. Magnetism in Solid State Materials 1.2.1. Diamagnetism 1.2.2. Paramagnetism 1.2.3. Cooperative Magnetism 1.2.4. Magnetic Anisotropy 1.2.5. Magnetism in D < 3 1.2.6. Critical Exponents 2. Methods 2.1. Synthesis and Crystal Growth 2.1.1. Solid State Synthesis 2.1.2. Crystal Growth via the Liquid Phase 2.1.3. Crystal Growth via the Vapor Phase 2.2. X-ray Diffraction 2.2.1. Single Crystal X-ray Diffraction 2.2.2. Powder X-ray Diffraction 2.3. Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy 2.3.1. Scanning Electron Microscopy 2.3.2. Energy Dispersive X-ray Spectroscopy 2.4. Magnetometry 2.5. Nuclear Magnetic Resonance Spectroscopy 2.6. Specific Heat Capacity 3. M2P2S6 3.1. Ni2P2S6 3.1.1. Crystal Growth 3.1.2. Characterization 3.1.3. Magnetic Properties 3.1.4. 31P-NMR Spectroscopy 3.1.5. Stacking (Dis-)Order in Ni2P2S6 3.2. (Fe1-xNix)2P2S6 3.2.1. Synthesis and Crystal Growth 3.2.2. Characterization 3.2.3. Evolution of Magnetic Properties 3.3. Summary and Outlook 4. M1+CrP2S6 4.1. CuCrP2S6 4.1.1. Crystal Growth 4.1.2. Characterization 4.1.3. Magnetic Properties 4.2. AgCrP2S6 4.2.1. Crystal Growth 4.2.2. Characterization 4.2.3. Magnetic Properties 4.3. Polycrystalline (Cu1-xAgx)CrP2S6 4.3.1. Synthesis 4.3.2. Phase Analysis 4.4. Summary and Outlook 5. M2(Ge,Si)2Te6 5.1. Cr2Ge2Te6 5.1.1. Crystal Growth 5.1.2. Characterization 5.1.3. Magnetic Properties 5.1.4. Analysis of the Critical Behavior 5.2. In2Ge2Te6 5.2.1. Crystal Growth 5.2.2. Characterization 5.2.3. Magnetic Properties 5.2.4. Specific Heat 5.3. Summary and Outlook 6. Conclusion Bibliography List of Publications Acknowledgements Eidesstattliche Erklärung A. Appendix A.1. Scanning Electron Microscopic Images A.1.1. (Fe1-xNix)2P2S6 A.2. scXRD A.2.1. (Fe1-xNix)2P2S6

<div> As hybrid 2D materials are incorporated into next-generation device designs, it becomes more and more pertinent that methods are being developed which can facilitate large-area structural control of noncovalent monolayers assembled at 2D material interfaces. Noncovalent functionalization is often leveraged to modulate the physical properties of the underlying 2D material without disrupting the extended electronic delocalization networks intrinsic to its basal plane. The bottom-up nanofabrication technique of self-assembly permits sub-10-nm chemical patterning with low operational costs and relatively simple experimental designs.</div><div> The Claridge Group is interested in leveraging the unique chemical orthogonality intrinsic to the cellular membrane as a means of creating sub-10-nm hydrophilic-hydrophobic striped patterns across 2D material interfaces for applications ranging from interfacial wetting to large-area molecular templates to guide heterogeneous nanoparticle assembly. Using Langmuir–Schaefer conversion, standing phases of polymerizable amphiphiles at the air-water interfaces of a Langmuir trough are converted (through rotation) to lying-down phases on 2D material substrates. Using room temperature substrates, transfer of amphiphiles to a lowered substrate results in small domains and incomplete surface coverage.</div><div> Recognizing that heating the substrate during the LS conversion process may lower the energy barriers to molecular reorientation, and promote better molecular domain assembly, we developed a thermally controlled heated transfer stage that can maintain the surface temperature of the substrate throughout the deposition process. We found that heating during transfer results in the assembly of domains with edge lengths routinely an order of magnitude larger than transfer using room temperature substrates that are more stable towards rigorous repeat washing cycles with both polar and nonpolar solvents.</div><div> To promote the effectiveness of the LS conversion technique beyond academic environments for the noncovalent functionalization 2D material substrates for next-generation device designs, we designed and built a thermally controlled rotary stage to address the longstanding scaling demerit of LS conversion. First, we report the development of a flexible HOPG substrate film that can wrap around the perimeter of the heated disk and can be continuously cycled through the Langmuir film. We found that thermally controlled rotary (TCR) LS conversion can achieve nearly complete surface coverage at the slowest translation speed tested (0.14 mm/s). TCR–LS facilitates the assembly of domains nearly 10,000 μm² which were subsequently used as molecular templates to guide the assembly of ultranarrow AuNWs from solution in a non-heated rotary transfer step. Together, these findings provide the foundation for the use of roll-to-roll protocols to leverage LS conversion for noncovalent functionalization of 2D materials. A true roll-to-roll thermally controlled LS conversion system may prove to be advantageous and a cost-efficient process in applications that require large areas of functional surface, or benefit from long-range ordering within the functional film.</div>

Nanomaterials are playing an increasing role in novel technologies, and it is important to develop optical methods to characterize them in situ.  To that end, backside absorbing layer microscopy (BALM) has emerged as a powerful tool, being capable to resolve sub-nanometer height profiles, with video-rate acquisition speeds and a suitable geometry to couple live experiments.  In the internship, several techniques involving BALM were developed, and applied to study optical and electrical properties of the transition metal dichalcogenide (TMD) monolayer MoS2, a type of 2-dimensional (2D) crystalline semiconductor.  A simulations toolkit was created in MATLAB to model BALM, a workflow to reliably extract linear intensities from the CMOS detector was realized, and 2D MoS2 was synthesized by chemical vapor deposition followed by transfer to appropriate substrates.  BALM data of the 2D MoS2 was acquired and combined with simulations, giving a preliminary result for its complex refractive index at 5 optical wavelengths.  In addition, the first steps towards coupling BALM with a gate biased 2D MoS2 field-effect transistor were explored.  To complement BALM measurements, the grown samples were also characterized by conventional optical microscopy, scanning electron microscopy, atomic force microscopy, photoluminescence spectroscopy, and Raman spectroscopy.  This work provides new additions to an existing platform of BALM techniques, enabling novel BALM experiments with nanomaterial systems.  In particular, it introduces a new alternative for local extraction of optical parameters and for probing of electrical charging effects, both of which are vital in the research and development of nano-optoelectronics.

Kohlenstoff 2D-Nanoschichten wie Graphen und Graphenoxid sind vielversprechend, aber schwierig in Bezug auf multivalente Wechselwirkungen zu kontrollieren. Das Verständnis, wie neuartige Funktionalisierungsmethoden die Geometrie, Wechselwirkungen und elektronischen Eigenschaften der Graphenblätter beeinflussen, ist der Schwerpunkt dieser Arbeit. Diese Arbeit untersucht zwei Methoden zur Modifikation von 2D-Graphennanoschichten: "Graft to" und "Graft from" Techniken, unter Verwendung von „[2+1] Nitren-Cycloaddition“ und ringöffnender Polymerisation von Glycerin, zusätzlich zum Wachstum von 2D-Triazin-Kohlenstoffstrukturen. Diese modifizierten Nanoschichten wurden hinsichtlich ihrer Wechselwirkung mit dem Vesikulären Stomatitis-Virus (VSV) und ihrer Zweidimensionalität mittels Rastersondenmikroskopie und Raman-Spektroskopie untersucht. Die Studie zeigt das Potenzial funktionalisierter Graphen in der Virologie und liefert Einblicke für zukünftige Forschungen. Ergebnisse zeigten, dass funktionalisierte 2D-TRGO an VSV-Partikel bindet und flexibel genug bleibt, um auf einer flachen Glimmeroberfläche Falten zu bilden, aber sie können die Virushüllen nicht vollständig umschließen. Dies liegt an den hohen Energiekosten für das Biegen großer lateraler Dimensionen (~1-2 μm) im Vergleich zur 200 nm Länge der VSV-Partikel. Eine optimale laterale Dimension von ~300 nm für funktionalisierte 2D-TRGO-Blätter maximiert virale Wechselwirkungen, Hemmungseffizienz und Anzeichen viraler Umhüllung. Triazin, ein Schlüsselmolekül in der Funktionalisierung, kann zur Herstellung von 2D-Triazin-Strukturen im Gramm-Maßstab verwendet werden. Potenzielle Anwendungen funktionalisierter Graphene umfassen spezialisierte antivirale Therapien und die Verwendung als Plattform für antivirale Medikamente. Zudem zeigten die Ergebnisse minimale Störungen der elektronischen Struktur von Graphen durch Triazin-Funktionalisierung. / Carbon-based 2D nanosheets like graphene and graphene oxide are promising but challenging to control in terms of multivalent interactions. Understanding how novel functionalization methods affect graphene sheets' geometry, interaction specificity and electronic properties is the focus of this thesis, which is crucial for advancing the design of 2D nanomaterials. This thesis examines two novel methods for modifying 2D graphene nanosheets: "graft to" and "graft from" techniques, using [2+1] nitrene cycloaddition reactions and ring-opening multibranch polymerization of glycerol in addition to in plane growth of 2D triazine -carbon based structures. These modified nanosheets were studied for their interaction with vesicular stomatitis virus (VSV) and their two-dimensionality using scanning probe microscopy methods and Raman spectroscopy. The study highlights the potential of functionalized graphene nanosheets in virology and provides insights for future research. Results revealed that functionalized 2D TRGO binds to VSV particles and remains flexible enough to wrinkle on a flat mica interface but they cannot completely wrap the viral envelopes. This is due to the high energy cost of bending large lateral dimensions (~1-2μm) compared to the 200 nm length of VSV particles. An optimum lateral dimension of ~300 nm for functionalized 2D TRGO sheets was found to maximize viral interactions, inhibition efficiency, and signs of viral envelopment. Triazine, a key molecule in functionalization, can also be used to create 2D triazine structures on a gram scale. Functionalized graphene's potential applications include specialized antiviral therapies, such as targeted therapies exploiting multivalent interactions between viruses and cellular receptors, and using functionalized graphene as a delivery platform for antiviral drugs. Additionally, results showed minimal disturbance of graphene electronic structure via Triazine functionalization.

Les objectifs de ce travail sont d'une part d'étudier la structure électronique de carbures de titane bidimensionnels appartenant à la famille des MXènes, et d'autre part de synthétiser des films minces pour caractériser certaines de leurs propriétés. L'étude de la structure électronique a été réalisée sur le système Ti3C2T2 avec une attention particulière portée aux groupements de surface T (T=OH, F ou O) en comparant les résultats obtenus par spectroscopie de perte d'énergie des électrons à ceux des calculs ab initio. Cette étude, portée à la fois sur les excitations du gaz d'électrons de valence et des électrons de coeur, a permis de mettre en évidence la localisation des groupements de surface, ainsi que leur influence sur la structure électronique du MXene. La comparaison des simulations et des spectres expérimentaux a également permis de caractériser la nature chimique des groupements de surface. Enfin, la limite d'une telle étude est discutée en considérant les phénomènes d'irradiation responsables de la perte d'atomes d'hydrogène. La synthèse d'échantillons modèles nécessite la synthèse préalable d'un film mince de phase MAX précurseur pour le MXene : nous avons choisi la phase Ti2AlC, précurseur de Ti2C. La synthèse de Ti2AlC a été réalisée par recuit ex-situ de systèmes multicouches déposés à température ambiante. Les films ont été caractérisés par diffraction des rayons X et microscopie électronique en transmission. Au-delà de l'obtention d'un film mince de Ti2AlC texturé, cette étude a permis de montrer que la phase recherchée était obtenue via des mécanismes d'interdiffusions induisant la formation d'une solution solide métastable vers 400°C qui se transforme en phase MAX vers 600°C. Enfin, l'application de ce procédé à la phase V2AlC a permis de montrer l'importance de l'orientation de la phase initiale pour l'obtention d'un film mince texturé. / The aim of this work is at first to study the electronic structure of bidimensional titanium carbide systems, belonging to the MXene family and also to synthesize thin films of such new materials to characterize their properties. The study of the electronic structure has been performed for the Ti3C2T2 MXene with a special attention to the T surface groups by using a combination of electron energy loss spectroscopy and ab initio calculations. This study, focused on both valence and core electrons excitations, enabled the identification of the surface group localization, their influence on the MXene electronic structure as well as their chemical nature. The limits of our TEM-based study is also discussed in view of irradiation phenomena which induce the loss of hydrogen atoms. The synthesis of a MXene thin film requires, beforehand, that of a MAX phase thin film: we opted for Ti2AlC, the precursor for the Ti2C MXene. The MAX phase thin film synthesis was carried out by ex-situ annealing of a multilayer layers. X-ray diffraction experiments and cross-sectional transmission electron microscopy observations show that a highly textured Ti2AlC thin film is obtained above 600°C after the formation, at 400°C, of a metastable solid solution. Finally, by using the same process for V2AlC, we demonstrate that the initial phase orientation plays a key role for the texture of the thin film so obtained.

La construction d’un NSOM, dans ce manuscrit de thèse, est décrite en détail. Lacombinaison du système NSOM construit avec un interféromètre est proposée afin d’accéderà des mesures de phase, à la fois de ultra-haute sensibilité mais également de très granderésolution spatiale. Le nom de l’instrument développé est un interferomètre optique àbalayage en champ proche (NSOI, pour l’acronyme en anglais). Le principe est basé surl’utilisation d’un diapason accordable en cristal de quartz, sur lequel se trouve une pointe,afin de sonder le matériau étudié. La mesure de la force de cisaillement de la pointe sondeau voisinage de la surface permet d’assurer la régulation et la stabilité de la distance depositionnement de la pointe par rapport à la surface considérée. Le dispositif est construit encombinant différents éléments électroniques pilotés par un logiciel développé en langageLab-VIEW. Le bruit de la mesure en NSOI est supprimé par un calcul simple basé sur lathéorie de l’optique ondulatoire et des interférences associées. Le système permet deréaliser des mesures optiques en champ proche ainsi que la détermination en hauterésolution de la phase du champ optique. L’échantillon SNG01 (l’un des réseaux utilisés pourcaractériser notre microscope à balayage en champ proche), ainsi que des disques optiques(CD, DVD and disques blu-ray) ont été utilisés pour tester la faisabilité et les performancesde notre système.Dans ce manuscrit de thèse, le graphène et les monocouches de MoS2 sont étudiés. Nous montrons qu’une épaisseur à l’échelle atomique peut être résolue par notresystème NSOI, avec l’utilisation de l’algorithme de suppression du bruit de mesure. Lesjoints de grain du graphène sont observés à grande échelle, via la technique d’imagerie parcollection en champ proche et par la réalisation de cartographies de phase. En particulier,les tensions internes à une couche de graphène sont observées, uniquement dans le casd’une imagerie de phase. / In this thesis, near-field scanning optical interferometry (NSOI), which combinesNSOM with interferometer, is proposed for the phase measurement. The shear-forcedetection scheme is applied for distance regulation. The hardware of the systemis constructed by combining various electronic devices, and the operating softwareis coded by LabVIEW. Unwanted background signal is removed by simple calculationbased on interference theory. By using this, the near-field optical measurementand the ultra-sensitive phase investigation of nano-materials are performed. 2D materialssuch as graphene and monolayer MoS2 are investigated. It is shown thatatomic-scale thickness can be resolved by the NSOI. Especially, the grain boundariesof graphene and the seed of MoS2 can be found by phase detection. In addition,direct laser writing (DLW) on silver-containing glass is observed by using NSOM,and NSOI. For the first time, the writing threshold is correlatively observed in thefluorescence imaging and the near-field phase image.