Yes / Diffusion ordered 1H-NMR spectroscopy (DOSY) is a useful, non-destructive technique for analysing polymer hydrodynamic size and intrinsic/solution viscosity. However, to date there has been no investigation of DOSY under variable temperature conditions that allow trends in polymer conformation to be determined. Poly(2-ethyl-2-oxazoline) (P(EtOx)) is a hydrophilic polymer that has the potential to replace poly(ethylene glycol) (PEG) in biomedical applications. Applying DOSY to a series of narrow-distribution P(EtOx) revealed that the apparent hydrodynamic radii scaled with molecular weight as expected. By altering the temperature of the solution the trends in Flory-type exponents were determined, enabling the determination of the power laws related to the coil-globule conformation of linear polymers directly from NMR data. These measurements were complicated by the onset of convection currents at higher temperatures, which impose a limit to the effective measurement range of ca. 10–35 °C. It was revealed that P(EtOx) had a more expanded random coil conformation than PEG, and it trended towards θ conditions at the lower critical solution temperature. In comparison, PEG was approximately in θ-conditions at room-temperature. This shows the use, and limitations of DOSY in polymer conformation analysis, and applies it to P(EtOx), a polymer which has not been analysed in this manner before. / University of Ghent (Grant Number: RM1602-1695)

Actuellement, les photochromes photoréversibles présentent un intérêt important en vue de leurs applications éventuelles comme interrupteurs optiques ou pour le traitement et le stockage de données. L’objectif principal de ce travail de thèse a été d’évaluer les 3-­-(2-­-benzylbenzoyl)-­-4-­-quinolones en tant que système photochromique photoréversible. Afin d’étudier la relation entre la structure chimique et le comportement photochromique de ce système, une série de nouvelles 3-­-(2-­-benzylbenzoyl)-­-4-­-quinolones à substitution variée a été préparée à l’aide de procédures connues ainsi qu’élaborées lors de ce travail. La photoréaction de ces nouveaux molecules étant très complexe, une méthode d’étude a été établie avec des 2-­-benzyl-­-3-­-benzoyl-­-4-­-quinolones photoénolisables au comportement plus simple. Leurs spectres d’absorption modélisés à l’aide de fonctions pekariennes ont été comparés avec les résultats des calculs quantiques. Le mécanisme selon lequel la réaction de décoloration se fait par l’ionisation des photoénols fortement acides via protonation des molécules du solvant a été établi. Enfin, la troisième partie est consacrée à l’étude des nouveaux dérivés de quinolones. D’après l’analyse de leurs spectres d’absorption, ainsi que les résultats des calculs quantiques, nous proposons un mécanisme où le transfert d’hydrogène photo-­-induit conduirait à la formation d’un intermédiaire biradicalaire, capable de se cycliser en dibenzo[b]acrydinones hydroxysubstituées. Un tel mécanisme expliquerait la forte influence qu’ont la nature des substituants en positions 1 et 2, ainsi que la température et la présence d’oxygène sur la régio-­- et stéréo-­-sélectivité de cette photoréaction. / Photoreversible photochromic compounds are currently of considerable interest from the point of view of their potential applications as molecular switches and for data storage and processing. The main target of the present investigation is to evaluate the scope and limitations of 3-­-(2-­-benzylbenzoyl)-­-4-­-quinolones as a photoreversible photochromic system. In order to investigate the relationship between quinolone chemical structures and photochemical behavior, a large series of new 3-­-(2-­-benzylbenzoyl)-­-4-­-quinolones with different substituents has been prepared using known as well as newly elaborated synthetic procedures. In the second part of the work a series of simpler photoenolizable 2-­-benzyl-­-3-­-benzoyl quinolones is studied by the means of fitting their UV-­-Vis absorption spectra and comparison with the results of quantum mechanical calculations at the TD DFT level. It was concluded that the mechanism of the reverse reaction involves ionization of the strongly acidic photoenols via protonation of the solvent molecules. The third part of the work includes investigation of the new quinolone derivatives. From the analyses of their absorption spectra and the results of quantum mechanical calculations, we propose a tentative mechanism, according to which the photoinduced hydrogen transfer yields a biradical, capable of cyclization into the hydroxy substituted dibenzo[b]acrydinones. This mechanism accounts for the observation that the nature of substituents in positions 1 and 2, the temperature and the presence of oxygen strongly affect regio-­- and stereoselectivity of the cyclization.

A series of Fe2+ spin crossover (SCO) complexes [Fe(5/6)]2+ employing hexadentate ligands (5/6) with cis/trans-1,2-diamino cyclohexanes (4) as central building blocks were synthesised. The ligands were obtained by reductive amination of 4 with 2,2′-bipyridyl-6-carbaldehyde or 1,10-phenanthroline-2-carbaldehyde 3. The chelating effect and the rigid structure of the ligands 5/6 lead to exceptionally robust Fe2+ and Zn2+ complexes conserving their structure even in coordinating solvents like dmso at high temperatures. Their solution behavior was investigated using variable temperature (VT) 1H NMR spectroscopy and VT Vis spectroscopy. SCO behavior was found for all Fe2+ complexes in this series centred around and far above room temperature. For the first time we have demonstrated that the thermodynamics as well as kinetics for SCO can be deduced by using VT 1H NMR spectroscopy. An alternative scheme using a linear correction term C1 to model chemical shifts for Fe2+ SCO complexes is presented. The rate constant for the SCO of [Fe(rac-trans-5)]2+ obtained by VT 1H NMR was validated by Laser Flash Photolysis (LFP), with excellent agreement (1/(kHL + kLH) = 33.7/35.8 ns for NMR/LFP). The solvent dependence of the transition temperature T1/2 and the solvatochromism of complex [Fe(rac-trans-5)]2+ were ascribed to hydrogen bond formation of the secondary amine to the solvent. Enantiomerically pure complexes can be prepared starting with R,R- or S,S-1,2-diaminocyclohexane (R,R-trans-4 or S,S-trans-4). The high robustness of the complexes reduces a possible ligand scrambling and allows preparation of quasiracemic crystals of [Zn(R,R-5)][Fe(S,S-5)](ClO4)4·(CH3CN) composed of a 1 : 1 mixture of the Zn and Fe complexes with inverse chirality. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Le travail présenté dans ce mémoire consiste à élaborer en une seule étape une couche mince organique ayant les propriétés chimiques et/ou morphologiques souhaitées. Cette démarche vise à copolymériser par voie plasma (PECVD) deux monomères antagonistes (apolaire et polaire) afin de contrôler la répartition et la taille des nodules de l’un des polymères dispersé dans l’autre phase et d’obtenir ainsi une structuration chimique et/ou morphologique. Pour ce faire, six précurseurs ont été sélectionnés de façon à couvrir une large gamme de polarité: l’alcool allylique (AA), l’acide acrylique (AAc), l’aniline (ANi), le diéthylèneglycol diméthyl éther (DEGDME), le 1H,1H,2H-perfluoro-1-décène (HDFD) et le 2-(diméthylamino) éthyle méthacrylate (DMAEMA).La première partie de ce travail est centrée sur l’étude des mécanismes de croissance des différents homopolymères par voie plasma pulsé. Les cinétiques de dépôt, les structures chimiques et les morphologies sont plus spécifiquement détaillées pour deux monomères, les HDFD et DMAEMA en fonction des paramètres du procédé plasma, la polymérisation plasma de ces deux précurseurs étant pour la première fois décrite. La caractérisation des couches minces obtenues repose sur la spectroscopie Infrarouge à Transformée de Fourier (FTIR), la spectroscopie de photoélectrons X (XPS) et la microscopie à force atomique (AFM). Cette étude a montré le rôle catalytique des groupements fluorés induisant des vitesses de dépôt plus conséquentes. Même si la croissance est prépondérante durant le temps de décharge, le dépôt est non négligeable pendant la post-décharge. La structure chimique des polymères plasma est fortement dépendante des paramètres de la décharge et notamment la puissance et le temps de décharge. La spectroscopie FTIR s’est révélée comme un outil performant pour l’évaluation de la rétention de la structure chimique de l’entité monomère initiale dans le polymère plasma. Ces homopolymères présentent une morphologie homogène sans rugosité.Dans la deuxième partie, nous abordons la copolymérisation plasma pulsé. Les différents copolymères synthétisés sont p-AA-co-HDFD, p-AAc-co-HDFD, p-ANi-co-HDFD, p-DEGDME-co-HDFD, p-DMAEMA-co-HDFD, p-DMAEMA-co-ANi. La plupart sont issus de comonomères hydrophiles et hydrophobes à l’exception d’un synthétisé à partir de deux précurseurs polaires. Les cinétiques de dépôt, les propriétés chimiques et morphologiques sont discutées en fonction des paramètres plasma tels que la puissance injectée mais aussi des proportions relatives des différents comonomères. Les différentes analyses chimiques entreprises montrent plutôt la formation d’un mélange d’homopolymères ou d’un copolymère à bloc plutôt que la croissance d’un nouveau matériau. Cette hypothèse est étayée par la mise en évidence d’une structuration morphologique correspondant à la présence d’îlots à la surface. / The work presented in this thesis consists to elaborate only in one step a thin organic layer having the required chemical and/or morphological properties. This approach aims to plasma copolymerize (PECVD) two antagonistic monomers (nonpolar and polar) in order of controlling the repartition and the size of nodules of one of the polymers dispersed in the other phase and thus, of inducting a chemical and/or morphological structuring. For this, six precursors have been selected to cover a large range of polarity: allyl alcohol (AA), acrylic acid (AAc), aniline (ANi), the diethylene glycol dimethyl ether (DEGDME), the 1H,1H,2H-perfluor-1-decene (HDFD) and 2-(dimethylamino)ethyl methacrylate (DMAEMA).The first part of this work is centered on studying the growth mechanism of different homo-polymers through pulsed plasma. The kinetics of deposition, the chemical structures and morphologies are more specifically detailed for two monomers, HDFD and DMAEMA in function of plasma parameters, the plasma polymerization of these two precursors being described for the first time. The thin layers were characterized through Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). This study showed the catalytic role of fluorine groups inducing more consequent deposit rates. Even if the growth is significant during the plasma on-time, the deposit is not negligible during the plasma off-time. The chemical structure of plasma polymers is highly dependent on the discharge parameters and mainly the power and the pulse period. The FTIR spectroscopy was shown to be a relevant tool for evaluating the chemical structure’s retention of the initial monomer entity in the plasma polymer. These homopolymers present a homogenous morphology without roughness.In the second part, the pulsed plasma copolymerization is described. The different synthesized copolymers are p-AA-co-HDFD, p-AAc-co-HDFD, p-ANi-co-HDFD, p-DEGDME-co-HDFD, p-DMAEMA-co-HDFD, p-DMAEMA-co-ANi. The majorities are issued from hydrophilic and hydrophobic co-monomers excepted for one synthesized from two polar precursors. The kinetics of deposits, the chemical and morphological properties were discussed in function to plasma parameters such as the injected power as well as the relative proportions of different co-monomers. The different chemical analyses showed the formation of a mixture of homopolymers or of a block copolymer rather than the growth of a new material. This hypothesis is unsubstantiated by evidencing a morphological structuring corresponding to the presence of spherical nanostructure at the surface.

Les travaux de recherche actuels menés dans le domaine des supercondensateurs s’orientent vers l’augmentation des densités d’énergie, notamment via le développement de supercondensateurs hybrides "oxydes de métaux de transition / carbones activés". Dans ce contexte, les présents travaux avaient pour objectif d’évaluer les propriétés d’oxydes de cobalt nanométriques en tant que matériaux d’électrode positive pour supercondensateur hybride.Ces oxydes de cobalt, de structure spinelle, sont préparés par précipitation de nitrate de cobalt en milieu basique (T < 90 °C). Ils possèdent une formule chimique du type HxLiyCo3-δO4•zH2O et présentent une bonne conductivité électronique grâce à la présence d’ions H+, Li+ et Co4+. Les analyses par DRX, ATG, RMN et les mesures de conductivité électroniques ont mis en évidence une réorganisation de la structure spinelle de ces matériaux sous l’effet d’un traitement thermique, conduisant à une augmentation du rapport Co4+/Co3+ ainsi qu’à une amélioration des propriétés de transport électrique. L’association d’une conductivité électronique élevée et d’une forte surface spécifique confère à ces oxydes des performances prometteuses en tant que matériaux d’électrode.L’étude des propriétés électrochimiques a montré la présence de deux modes de stockage des charges, l’un électrostatique (double couche électrochimique) et l’autre faradique via l’oxydation et la réduction du cobalt. Elle a également permis de déterminer la signature électrochimique de ces oxydes (capacité, fenêtre de potentiels), prérequis indispensable à leur intégration dans une cellule complète. Finalement, un supercondensateur hybride "oxyde de cobalt / carbone activé" a été assemblé et équilibré, donnant lieu à des performances attractives (61,6 F/g sur 1,60 V). / Investigations on supercapacitors are focusing on increasing energy densities, in particular with the development of hybrid supercapacitors "metal oxides / activated carbons". In this field, the present work aims at evaluating nanometric cobalt oxides as positive electrode material for hybrid supercapacitors.These oxides, with spinel structure, are synthesized by precipitation of cobalt nitrate in a basic medium (T < 90 °C). They exhibit formulae such as HxLiyCo3-δO4•zH2O and good electronic properties thanks to the presence of H+, Li+ and Co4+ ions. XRD, TGA, NMR analysis as well as electronic measurements have highlighted a structural reorganization of the spinel structure under thermal treatment, resulting in increase of the Co4+/Co3+ ratio and an enhancement of the electronic transport properties. The high electronic conductivity together with a huge specific surface area imparts these oxides promising performances as electrode material.The study of the electrochemical properties underlines two charge storage mechanisms, one electrostatic (electrochemical double layer) and the other one faradic through the oxidation and the reduction of cobalt. The electrochemical signature (capacity, potential window) of these oxides was also determined in order to develop a complete cell. Finally, a hybrid supercapacitor "cobalt oxide / activated carbon" was assembled and balanced, revealing attractive performances (61,6 F/g over 1,60 V).

Made available in DSpace on 2014-12-17T15:41:48Z (GMT). No. of bitstreams: 1 Bruna Vital de Lima_DISSERT.pdf: 1526229 bytes, checksum: 072431027e1aefba9f0023f2f514ae5f (MD5) Previous issue date: 2010-02-02 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The hydrolysis reaction in alkaline conditions of the commercial polymer poly(acrylamide-co-metacrylate of 3,5,5-trimethyl-hexane) called HAPAM, containing 0.75 % of hydrophobic groups, was carried out in 0.1 M NaCl and 0.25M NaOH solutions, varying the temperature and reaction time. The polymers were characterized by 1H and 13C Nuclear Magnetic Resonance (NMR), Elemental Analysis and Size Exclusion Chromatography (SEC). The values of the hydrolysis degree were obtained by 13C NMR. The viscosity of HAPAM and HAPAM-10N-R solutions was evaluated as a function of shear rate, ionic strength and temperature. At high polymer concentration (Cp), the viscosity of HAPAM solutions increased with the ionic strength and decreased with the temperature. The viscosity of HAPAM-10N-R solutions increased significantly in distilled water, due to repulsions between the carboxylate groups. At high Cp, with the increase of ionic strength and temperature, occurred a decrease of viscosity, due to mainly the high hydrolysis degree and the low amount of hydrophobic groups. These results indicated that the studied polymers have properties more suitable for the application in Enhanced Oil Recovery (EOR) in low salinity and moderate temperature reservoirs / A rea??o de hidr?lise em meio alcalino do pol?mero comercial poli(acrilamida-co-metacrilato de 3,5,5 trimetil-hexano) denominado HAPAM, contendo 0,75 % de grupos hidrof?bicos, foi realizada em solu??es de NaCl 0,1 M e NaOH 0,25 M, variando a temperatura e o tempo reacional. Os pol?meros foram caracterizados por Resson?ncia Magn?tica Nuclear (RMN) de 1H e 13C, An?lise Elementar e Cromatografia de Exclus?o por Tamanho (SEC). Os valores do grau de hidr?lise foram obtidos por RMN 13C. A viscosidade das solu??es de HAPAM e HAPAM-10N-R foi avaliada em fun??o da taxa de cisalhamento, for?a i?nica e temperatura. ? alta concentra??o polim?rica (Cp), a viscosidade das solu??es de HAPAM aumentou com a for?a i?nica e diminuiu com o aumento da temperatura. A viscosidade das solu??es de HAPAM-10N-R aumentou significantemente em ?gua destilada, devido ?s repuls?es entre os grupos carboxilato. ? alta Cp, com o aumento da for?a i?nica e da temperatura ocorreu uma diminui??o da viscosidade, devido, principalmente, ao alto grau de hidr?lise e ? baixa quantidade de grupos hidrof?bicos. Estes resultados indicaram que os pol?meros estudados apresentam propriedades mais adequadas para aplica??o na recupera??o avan?ada de petr?leo (EOR) em reservat?rios de baixa salinidade e temperatura moderada

Conselho Nacional de Desenvolvimento Científico e Tecnológico / This work presents the synthesis of 41 succinimides, 24 pyrrolidinones and 8 tetrazoles, all presenting unprecedented chemical structure, except for the succinimide 3-ethoxy-1-methylpyrrolidine-2,5-dione. These compounds were synthesized by cyclization reactions of β-cyanocarboxylic acids of general formula HO2CCH(R1)CH(OR)CN, where R/R1 = Et/H (9), -(CH2)2- (10), -(CH2)3- (11), Et/Me (12), i-Pr/H (13), s-Bu/H (14), i-Pr/Me (15), s-Bu/Me (16), with amine derivatives or sodium azide. Initially NR2-substituted 3-ethoxypyrrolidine-2,5-diones were obtained from the cyclization of 3-ethoxy-3-cyanopropanoic acid 9 with a series of amine derivatives of general formula NH2R2, where R2 = -CH2-2-Py (17a), -CH2-3-Py (17b), -CH2-4-Py (17c), -CH2C6H5 (17d), -(CH2)2C6H5 (17e), -(CH2)2NMe2 (17f), -(CH2)2NEt2 (17g), Me (17h), Et (17i), Pr (17j), i-Pr (17k), allyl (17l), -(CH2)2OH (17m), -(CH2)3OH (17n), - CH2CH(OH)Me (17o), -CH(CH2OH)Et (17p), -CH(CH2OH)i-Pr (17q), -CH(CH2OH)i-Bu (17r), -CH(CH2OH)s-Bu (17s), -CH(CH2OH)Bn (17t), -CH2CO2H (17u) e - CH2CONH2 (17v). When the cyclization reaction were carried out with diamines of structure NH2(CH2)nNH2, where n = 1, 2 ou 3, the corresponding 1,1 -(alkyldiyl)bis(3- ethoxypyrrolidine-2,5-diones) were obtained. In addition, the reaction of 2-cyanotetrahydrofuran-3-carboxylic acid 10 with amines 17a-p, furnished a series of NR2- substituted 2,3,3a,6a-tetrahydrofuro[2,3-c]-5H-pyrrol-4,6-diones in good yields. In sequence, 4-ethoxy-5-hydroxypyrrolidin-2-ones and 6-hydroxy-3,3a,6,6atetrahydro- 2H-furo[2,3-c]-5H-pyrrol-4-ones were synthesized by regioselective reduction of 3-ethoxypyrrolidine-2,5-diones and 2,3,3a,6a-tetrahydrofuro[2,3-c]-5Hpyrrol- 4,6-diones, previously obtained, by reaction of acids 9 and 10 with selected nucleophiles 17a-l. The reduction reactions were performed using sodium borohydride as reducing agent and, in general, the hydroxylated products were obtained with high diastereoselectivity. Finally, [2 + 3] cycloaddition reaction between β-cyanocarboxylic acids 9-16 with sodium azide, catalyzed by zinc chloride, were carried out furnishing a series of 5-substituted 1-H tetrazoles, where R/R1 = Et/H, -(CH2)2-, -(CH2)3-, Et/Me, i-Pr/H, s- Bu/H, i-Pr/Me, s-Bu/Me. / Este trabalho apresenta a síntese de 41 succinimidas, 24 pirrolidinonas e 8 tetrazóis, todos apresentando estrutura química inédita, com exceção da succinimida 3-etóxi-1-metilpirrolidina-2,5-diona. Os compostos mensionados foram sintetizados a partir de reações de ciclização dos ácidos β-cianocarboxílicos de fórmula geral HO2CCH(R1)CH(OR)CN, onde R/R1 = Et/H (9), -(CH2)2- (10), -(CH2)3- (11), Et/Me (12), i-Pr/H (13), s-Bu/H (14), i-Pr/Me (15), s-Bu/Me (16), com derivados amínicos ou azida de sódio. Inicialmente 3-etoxipirrolidina-2,5-dionas NR2-substituídas foram obtidas a partir da ciclização do ácido 3-etóxi-3-cianopropanóico 9 com uma série de derivados amínicos de fórmula NH2R2, sendo R2 = -CH2-2-Py (17a), -CH2-3-Py (17b), -CH2-4-Py (17c), -CH2C6H5 (17d), -(CH2)2C6H5 (17e), -(CH2)2NMe2 (17f), -(CH2)2NEt2 (17g), Me (17h), Et (17i), Pr (17j), i-Pr (17k), alil (17l), -(CH2)2OH (17m), -(CH2)3OH (17n), -CH2CH(OH)Me (17o), -CH(CH2OH)Et (17p), -CH(CH2OH)i-Pr (17q), - CH(CH2OH)i-Bu (17r), -CH(CH2OH)s-Bu (17s), -CH(CH2OH)Bn (17t), -CH2CO2H (17u) e -CH2CONH2 (17v). Quando empregadas nas reações de ciclização diaminas de estrutura NH2(CH2)nNH2, onde n = 1, 2 ou 3, foram obtidas as respectivas 1,1 - (alquildiil)bis(3-etoxipirrolidina-2,5-dionas). Em adição, 2,3,3a,6a-tetraidrofuro[2,3-c]-5H-pirrol-4,6-dionas NR2-substituídas foram obtidas quando empregado o ácido 2-cianotetraidrofuran-3-óico 10 nas reações de ciclização com os derivados amínicos 17a-p. Em sequência, 4-etóxi-5-hidroxipirrolidin-2-onas e 6-hidróxi-3,3a,6,6atetraidro- 2H-furo[2,3-c]-5H-pirrol-4-onas foram sintetizadas através da redução regiosseletiva das respectivas succinimidas 3-etoxipirrolidina-2,5-dionas e 2,3,3a,6atetraidrofuro[ 2,3-c]-5H-pirrol-4,6-dionas anteriormente obtidas pela reação dos ácidos 9 ou 10 com os nucleófilos selecionados 17a-l. As reações de redução foram realizadas utilizando boroidreto de sódio como agente redutor e, em geral, os produtos hidroxilados foram obtidos com alta diastereosseletividade. Finalmente foi realizada reação de cicloadição [2+3] da série de ácidos β- cianocarboxílicos 9-16 com azida de sódio e catálise de cloreto de zinco. As reações forneceram como produtos uma série de tetrazóis 1H-5-substituídos, onde R/R1 = Et/H, -(CH2)2-, -(CH2)3-, Et/Me, i-Pr/H, s-Bu/H, i-Pr/Me, s-Bu/Me.

L’utilisation de molécules issues d’une synthèse maîtrisée est une approche très intéressante pour les biologistes car elle met à leur disposition des molécules bien caractérisées et d’une grande pureté. Dans un premier temps, nous avons synthétisé des triglycérides structurés. Ce sont des molécules lipidiques dans lesquelles les acides gras d’intérêt sont estérifiés sur le squelette glycérol en position connue. Les acides gras introduits appartiennent à la série oméga 3 (acides linolénique (ALA), eicosapentaènoique (EPA) et docosahexaènoique (DHA). Ils sont estérifiés spécifiquement en position interne ou externes car la biodisponibilité des lipides alimentaires, apportés sous forme de triglycérides, varie en fonction de la position de l’acide gras sur le squelette glycérol. L’utilisation de ces lipides structurés a été validée par des études de biodisponibilité, in vivo, chez le rat, qui ont montré que l’ALA était très bien assimilé quelle que soit sa position sur le glycérol. Dans un deuxième temps, nous avons synthétisé un acide a-linolénique fluorescent, sous forme d’ester méthylique, pour obtenir in fine un TG fluorescent. Celui-ci nous permettra suivre, par imagerie, le devenir de l’ALA dans des cellules en culture, modèles de la barrière intestinale. Les différentes molécules synthétisées sont apparues comme un outil fondamental permettant de mieux connaître le devenir métabolique des triglycérides dans l’organisme. / Biologists are very interested in the use of molecules obtained by a well-controlled synthesis because such molecules are well characterized and of high purity. First, we synthesized pure structured triglycerides in other words lipid molecules in which fatty acids are esterified onto a known position of the glycerol backbone. The introduced polyunsaturated fatty acids belong to the omega 3 series (linolenic (LNA),eicosapentaenoic (EPA) and docosahexaenoic (DHA acids). As the bioavailability of lipids depends upon their position on the glycerol skeleton , we prepared triglycerides esterified with omega 3 fatty acids either qt one of the external positions or at the internal one. The use of these structured lipids was validated byr in vivo studies on rats that showed a good assimilation of LNA whatever its position was. Secondly, we synthesized an ? linolenic acid as methyl ester labeled with a fluorophore To obtain in fine a fluorescent triglyceride. This last one will be use for the spatio-temporal follow-up, in culture cell, of the LNA. The synthesized molecules are a promising tool to better understand the triglycerides’ metabolism in the human being.

Ce travail consiste en l’étude par RMN multinoyaux de matériaux paramagnétiques d’électrodes positives pour batteries au Li. La RMN du solide permet une caractérisation de l’environnement local du noyau sondé grâce à l’exploitation des interactions hyperfines dues à la présence d’une certaine densité d’électrons célibataires (déplacement de contact de Fermi) ou de conduction (déplacement de Knight) sur ce noyau (densité transférée selon des mécanismes plus ou moins complexes). Les matériaux étudiés sont des phosphates de métaux de transition tels que Li3M2(PO4)3 (M = Fe, V), la famille des tavorites LiMPO4X (M = Fe, Mn; X = OH, F) ou encore les phases homéotypiques MPO4.H2O (M = Fe, Mn, V). Pour tous ces matériaux, caractérisés par RMN du 7Li, 31P et 1H, l’environnement local de ces noyaux a été étudié afin d’envisager les mécanismes de transfert de spin possibles. Des calculs ab initio ont été effectués pour reproduir les déplacements de RMN, puis établir des cartes de densité de spin afin d’étayer ou compléter la compréhension de ces mécanismes. / Paramagnetic materials for positive electrodes for Li batteries have been studied by multinuclear NMR. The local environment of the probed nucleus can be characterized by solid state NMR making use of hyperfine interactions due to transfer of some electron spin density (Fermi contact shift) on this nucleus, via more or less complex mechanisms. We studied a series of transition metal phosphates as Li3M2(PO4)3 (M = Fe, V) with anti-NASICON structure, LiMPO4X (M = Fe, Mn; X = OH, F) belonging to the tavorite family and the homeotypic phases MPO4.H2O (M = Fe, Mn, V). All these materials have been characterized by 7Li, 31P and 1H NMR, and the local environments of these nuclei have been analyzed to propose possible spin transfer mechanisms. First principles DFT calculations have been carried out to, first of all, reproduce the experimental NMR shifts, and then to confirm or complement the understanding of these mechanisms, in particular by plotting spin density maps.

A series of Fe2+ spin crossover (SCO) complexes [Fe(5/6)]2+ employing hexadentate ligands (5/6) with cis/trans-1,2-diamino cyclohexanes (4) as central building blocks were synthesised. The ligands were obtained by reductive amination of 4 with 2,2′-bipyridyl-6-carbaldehyde or 1,10-phenanthroline-2-carbaldehyde 3. The chelating effect and the rigid structure of the ligands 5/6 lead to exceptionally robust Fe2+ and Zn2+ complexes conserving their structure even in coordinating solvents like dmso at high temperatures. Their solution behavior was investigated using variable temperature (VT) 1H NMR spectroscopy and VT Vis spectroscopy. SCO behavior was found for all Fe2+ complexes in this series centred around and far above room temperature. For the first time we have demonstrated that the thermodynamics as well as kinetics for SCO can be deduced by using VT 1H NMR spectroscopy. An alternative scheme using a linear correction term C1 to model chemical shifts for Fe2+ SCO complexes is presented. The rate constant for the SCO of [Fe(rac-trans-5)]2+ obtained by VT 1H NMR was validated by Laser Flash Photolysis (LFP), with excellent agreement (1/(kHL + kLH) = 33.7/35.8 ns for NMR/LFP). The solvent dependence of the transition temperature T1/2 and the solvatochromism of complex [Fe(rac-trans-5)]2+ were ascribed to hydrogen bond formation of the secondary amine to the solvent. Enantiomerically pure complexes can be prepared starting with R,R- or S,S-1,2-diaminocyclohexane (R,R-trans-4 or S,S-trans-4). The high robustness of the complexes reduces a possible ligand scrambling and allows preparation of quasiracemic crystals of [Zn(R,R-5)][Fe(S,S-5)](ClO4)4·(CH3CN) composed of a 1 : 1 mixture of the Zn and Fe complexes with inverse chirality. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.