<p>This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.</p><p>The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.</p><p>The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.</p><p>The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.</p><p>In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.</p><p>Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.</p><p>The work consisted in making the groundwork for a template. That means there is a lot of work for the company left to do until the template is ready to be used in working routine.</p><p>The template includes estimations that are not tested with real figures and therefore can contain hidden defects. The company could not supply us with the figures on the relevant costs, because of secrecy reason. Therefore it is very difficult to eliminate the risk for hidden defects in the template. In order to distinguish obvious defects, made up figures were used. These can differ essential from the real figures, but the purpose is to minimise the defects and help the company to see how the template works.</p><p>An improvement suggestion is that the company should use the proposed flow of information in order to save time and therefore be able to spend more time with the main operations. The flow of information saves time by:</p><p>• Using more the current computer system</p><p>• Being simple</p><p>• Identifying unnecessary activities, so that it can be removed or modified</p>

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik. The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient. The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation. The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen. In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section. Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented. The work consisted in making the groundwork for a template. That means there is a lot of work for the company left to do until the template is ready to be used in working routine. The template includes estimations that are not tested with real figures and therefore can contain hidden defects. The company could not supply us with the figures on the relevant costs, because of secrecy reason. Therefore it is very difficult to eliminate the risk for hidden defects in the template. In order to distinguish obvious defects, made up figures were used. These can differ essential from the real figures, but the purpose is to minimise the defects and help the company to see how the template works. An improvement suggestion is that the company should use the proposed flow of information in order to save time and therefore be able to spend more time with the main operations. The flow of information saves time by: • Using more the current computer system • Being simple • Identifying unnecessary activities, so that it can be removed or modified

<p>Background: The Activity-Based Costing model has its origin in the Manufacturing Industry and has since its origin become more usual. The ABC-method is beginning to break through in several others businesses than just the Manufacturing Industry, but there are insufficient information about how the ABC-model can be developed in Trading Company for instance. These companies often use simple and stereotyped calculations in their organizations and assume the cost price by calculating, which give rise to an inappropriate allocation of the costs. ABC could therefore be a solution to these problems and therefore would it be interesting to investigate how this model can be designed in a trading company. </p><p>Purpose: The purpose of this paper is to describe the design and usage of the Activity-Based Costing in a Trading Company. Method: The paper has a sign of a case study. A more deep study has also been made at Materialservice in Nässjö, while the study at ICA, Hall.miba and Svenskt Papper has been of a more supplementary nature. We have also made interviews with two firms of consultants, Prodacapo and SAM in purpose to make our study/investigation more general. </p><p>Result: We have found that the result the customer has a more important role in the Trading Company than the Manufacturing Industry and that the Trading Company use more activities and cost drivers in their ABC-model. The result also shows that the main area of use of ABC in the trading company is to guide the behaviours of the company and the customers.</p>

Background: The Activity-Based Costing model has its origin in the Manufacturing Industry and has since its origin become more usual. The ABC-method is beginning to break through in several others businesses than just the Manufacturing Industry, but there are insufficient information about how the ABC-model can be developed in Trading Company for instance. These companies often use simple and stereotyped calculations in their organizations and assume the cost price by calculating, which give rise to an inappropriate allocation of the costs. ABC could therefore be a solution to these problems and therefore would it be interesting to investigate how this model can be designed in a trading company. Purpose: The purpose of this paper is to describe the design and usage of the Activity-Based Costing in a Trading Company. Method: The paper has a sign of a case study. A more deep study has also been made at Materialservice in Nässjö, while the study at ICA, Hall.miba and Svenskt Papper has been of a more supplementary nature. We have also made interviews with two firms of consultants, Prodacapo and SAM in purpose to make our study/investigation more general. Result: We have found that the result the customer has a more important role in the Trading Company than the Manufacturing Industry and that the Trading Company use more activities and cost drivers in their ABC-model. The result also shows that the main area of use of ABC in the trading company is to guide the behaviours of the company and the customers.

Examensarbete i Ekonomistyrning, 30hp, Ekonomihögskolan vid Linnéuniversitetet Titel: Kalkylutveckling i tillverkningsindustrin – en fallstudie hos HordaGruppen AB Under 1980-talet uppmärksammades kalkylmodellens roll som ekonomiskt styrverktyg. Denna uppmärksamhet ledde till omfattande studier av hur kalkylmodeller kunde utvecklas för att lättare klara av förändringar i företags inre och yttre förutsättningar. Kalkylmodellers utformning påverkas av ett stort antal faktorer som t.ex. strategi, kontext och användning. Därmed blev det intressant att detaljstudera ett enskilt fallföretag för att identifiera hur detta företag arbetar med sin kalkylmodell. Syftet med uppsatsen är att utveckla HordaGruppens kalkylmodell och anpassa denna efter förändringar i företagets verksamhet. Genom kartläggning och utvärdering av kalkylmodellen, företagets kalkylbehov samt kostnadsfördelning utifrån ett processorienterat perspektiv analyseras och utvecklas företagets kalkylmodell. Målsättningen är att nyttan för HordaGruppen av att använda kalkylmodellen som styrverktyg ska öka. Uppsatsen är en kvalitativ studie med fokus på detaljstudier av företagets flöden och processer. Huvudsakligen har ostrukturerade intervjuer och observationer legat till grund för materialet men även insamlad dokumentation som t.ex. information från affärssystemet, kalkylmodellen och organisationsscheman har använts. Den konceptuella referensramen som sammanställs ligger till grund för en analysmodell som beskriver hur empirin ska analyseras. Denna bygger på ett antal olika områden som sedan sammanfogas för att belysa de mer framträdande problemområdena i HordaGruppens kalkylmodell. Den genomförda studien visar ett antal problemområden med potential att förbättra den ekonomiska styrningen ur förändringssynpunkt. Uppsatsen identifierar ett stort behov av att hålla kalkylmodellens grunddata uppdaterad. Samtidigt föreslås förändrad kostnadsfördelning inom flera områden, bl.a. för direkta kvalitetskostnader och omkostnader för produktionsanläggningar. Slutligen föreslås utökad användning av kalkylmodellen som ett sätt att förbättra kalkylens roll som styrverktyg i en föränderlig verksamhet. / Thesis in Management Accounting 30hp, School of Business and Economics, Linnaeus University Title: Cost model development within the manufacturing industry – a case study of HordaGruppen AB In the 1980s, a discussion regarding the role of cost modeling as a management accounting tool erupted. This attention led to extensive studies of how costing models were developed to better cope with changes in the company's internal and external conditions. Cost model design is influenced by numerous factors such as strategy, context and purpose. With this in mind, it became interesting to study a case company in detail to identify the usage of the cost model within the company.  The main purpose of this thesis is to develop the cost model currently used by HordaGruppen and adjust it to cope with changes in the company environment. Based on HordaGruppens processes and their cost model needs, suggestions for development of the company’s cost accounting tools are made. The goal of this development is that the usefulness of the cost model in HordaGruppens management accounting should increase.  The main method of research is a qualitative study focusing on detailed studies of the company's workflows and processes. Information has been gathered mainly through interviews and observations. Other sources of information such as the ERP system, organizational charts and the cost model itself have also been used.  The completed study shows potential areas of improvement for management accounting purposes. The main areas of improvement are linked to keeping the underlying data up to date and changes in cost estimation. Finally, to improve management accounting in a changing environment, additional purposes for the cost estimation model is suggested.

Familjeföretag är den mest förekommande företagsformen i världen och forskningen kring familjeföretag har ökat markant under de senaste årtiondena. I takt med globalisering och företagsmässig tillväxt ställs det allt mer krav på företags ekonomistyrning, vilken oftast har en informell karaktär bland familjeföretag. För att ekonomistyrningen ska behålla sin funktion i detta lyfter forskare fram att den behöver inkludera ett mer strategiskt fokus med strategiska styrmedel som understödjer företagsvisionen, något som kan kräva att familjeföretagen genomgår en professionalisering genom inhämtning av extern kompetens. Huruvida strategiska styrmedel används bland familjeföretag eller inte, saknas det dock kvalitativ forskning om, varpå vi har vänt oss mot en familjeföretagsintensiv region som kännetecknas av hög ekonomisk tillväxt, den så kallade Gnosjöregionen. Studiens syfte är att öka förståelsen för vilken roll strategiska styrmedel har bland familjeföretagen i Gnosjöregionen. Detta har vi ämnat försöka göra genom att fokusera kring tre utvalda strategiska styrmedel, nämligen benchmarking, ABC-kalkylering och balanserat styrkort. Studien har genomförts med hjälp av en kvalitativ metod, där data har samlats in genom semistrukturerade intervjuer. Detta för att öka möjligheten att skapa en djupare förståelse för det undersökta ämnet. Studiens resultat har påvisat att det enda av de undersökta styrmedlen som används formellt är benchmarking, detta genom kontinuerlig prestationsbenchmarking. Vidare har studiens resultat visat på tendenser att de två övriga strategiska styrmedlen ABC-kalkylering och balanserat styrkort används, men att det sker mer informellt. Emellertid ser vi ett ökat intresse och behov för dessa två strategiska styrmedel till följd av företagsmässig tillväxt. Vår slutsats är dock att för att familjeföretag lyckosamt ska kunna implementera dessa tre strategiska styrmedel, så räcker inte professionalisering genom att anställa en extern ekonomichef, utan det krävs en ytterligare professionalisering genom extern kompetens. / Family firms are the most common type of business in the world and the study of family firms has increased significantly over the recent decades. In line with globalization and business growth, the need for management accounting and control have increased which often has an informal characteristic in family firms. Scholars have warned that if management accounting and control is to maintain its relevance it needs to adapt a more strategic focus, through strategic management accounting and control instruments, to underline the vision of the business, which can create the need of professionalization of the family firm, through hiring external expertise. Whether strategic management accounting and control instruments is something that family firms are using or not, has not been investigated with qualitative research, which is why we have focused on a family firm intensive region characterized by high economic growth, the so-called region of Gnosjö. The purpose with this research is to increase the understanding of what role the strategic management accounting and control instruments have within family firms in the region of Gnosjö. We did so by focusing on three specifically chosen strategic management accounting and control instruments, explicitly benchmarking, activity based costing and the balanced scorecard. The study was conducted using a qualitative approach, in which data was collected through semi-structured interviews. This is to increase the ability to create a deeper understanding of the examined subject. The results show that only one of the three surveyed instruments that is being used formally is benchmarking, which is primarily done through continuous performance benchmarking. Furthermore, the study results show tendencies that the two other strategic instruments, activity based costing and the balanced scorecard, is used but in a more informal way. However, we see an increased interest and a need for these two strategic instruments as a result of business growth. Our conclusion is however that if these three strategic management accounting and control instruments are to be successfully implemented in a family firm, professionalization by hiring an external CFO is not enough; instead it requires a further professionalization through external expertise.

Då tillverkningsindustrin går mot en högre grad av kundanpassning och implementering av Lean, samtidigt som föråldrade traditionella kalkyleringsmetoder fortfarande används i moderna industriföretag, är det intressant att utreda relationerna mellan produktionsflöden av kundanpassad karaktär, Lean samt olika kalkyleringsmetoder. Syftet är att öka kostnadsprecisionen i förkalkylen för ett produktionsflöde av kundanpassad och Lean karaktär och beskriva en generaliserbar arbetsprocess för detta. Syftet är även att ta fram generella rekommendationer för val av kalkyleringsmetod genom att utifrån denna produktions karaktär genomföra en jämförande analys av kalkyleringsmetoder (traditionella kalkylmetoder, ABC och kalkylering enligt Lean). Genom en litteraturstudie samt en fallstudie av ett produktionsflöde med många varianter och inslag av Lean har båda syftena uppfyllts. Fallstudien har utförts genom intervjuer och observationer. Problem och positiva faktorer som enligt litteratur karaktäriserar produktion av kundanpassade produkter har även återfunnits på fallföretaget. Det sambandet har kunnat användas för att stödja analysen av relationerna. Relationerna mellan kalkyleringsmetoder, Lean samt produktionsflöden av kundanpassad karaktär har analyserats genom att jämföra litteratur och resultat från fallstudien. Det framkom att Value Stream Costing (VSC) är den mest lämpliga kalkyleringsmetoden för produktionsflöden med kundanpassade produkter som uppnått en hög mognadsgrad av Lean. Förkalkyleringen på fallföretaget är beroende av tillförlitliga operationstider, vilket tagits fram på fallföretaget samtidigt som en generell arbetsprocess utarbetats. Operationstiderna togs i detta fall fram genom videoupptagning av produktionsmomenten samt efterföljande analys i mjukvaran AviX. Genom att följa den generella arbetsprocessen som utarbetats erhålls både ett bra underlag till förkalkylering samt ständiga förbättringar i produktionsflödet. Eftersom forskning visar att Lean bör implementeras i hela organisationen om full fördel med Lean ska uppnås, kan VSC vara en utmärkt kalkyleringsmetod för att komma ifrån föråldrade, traditionella kalkyleringsmetoder samtidigt som denna kalkyleringsmetod förenklar kalkylering i produktion av kundanpassad karaktär. / Since the manufacturing industry is heading for a higher level of customization and implementation of Lean, at the same time as outmoded traditional costing methods is still used in modern industrial organizations, it is interesting to explore the relations between production flows of customized character, Lean and different costing methods. The purpose of this thesis is to increase the cost precision in the preliminary calculation for a product flow of customer adapted and Lean character, and to describe a generalizable work process for this. The purpose is also to develop general recommendations regarding the choice of costing methods by, on a basis of the character of this production, a comparative analysis of costing methods (traditional costing methods, ABC and Lean accounting/VSC). Through a literature study and a case study of a production flow with a high level of variety and influence from Lean, both of the purposes has been fulfilled. The case study has been accomplished through interviews and observations. Problems and positive elements that according to literature characterize the production of customized products have also been found in the case company. That connection has been used to support the analysis of the relations. The relations between costing methods, Lean and production flows of customized character has been analyzed through a comparison between findings in literature and results from the case study. It has been found that Value Stream Costing (VSC) is the most appropriate costing method for production flows of customized products that has reached a high maturity level of Lean. The preliminary costing is dependent on reliable operation times which have been produced on the case study company, while a general work process has been developed. The operation times were in this case identified through video recordings of the production moments and a following analysis in the software AviX. By following the general work process that has been developed, useful material for preliminary costing and continuous improvements in the production flow will be obtained. Since research is showing that Lean should be implemented in the whole organization if full advantages of Lean shall be obtained, VSC is found to be an ideal costing method to replace outmoded, traditional costing methods at the same time as this costing method simplifies costing in production flows of customized character.

Bakgrund och problem: Det har riktats kritik mot den traditionella ekonomistyrningen vilket har gjort att moderna styrmetoder och verktyg växt fram för att komplettera ekonomistyrningen. De faktorer som tvingat fram den moderna styrningen går även att se i musikbranschen. Detta, tillsammans med att ekonomistyrning i musikbranschen generellt sett är outforskat, gör att det blir intressant att undersöka hur skivbolag i musikbranschen använder sig av en traditionell ekonomistyrning eller modern verksamhetsstyrning. Syfte: Syftet med denna uppsats är att genom att undersöka två skivbolags ekonomistyrning kartlägga hur ekonomistyrningen karaktäriseras utifrån traditionell ekonomistyrning och modern verksamhetsstyrning. Metod: Metoden som använts vid denna studie är kvalitativ. Vi har genom fallstudier hos två skivbolag undersökt och skapat oss en förståelse av ekonomistyrningen i bolagen med hjälp av semi-strukturerade intervjuer och kompletterande frågor via mail.   Slutsats: Det går att se att skivbolagen övergått delvis till en modern verksamhetsstyrning men att det alltså finns en blandning mellan användandet av traditionella och moderna styrmetoder och verktyg. / Background and problem: Criticism has been raised towards the traditional management control which pushed forward modern management methods and tools to complement management accounting. The factors that pushed out this modern management control are possible to see in the music industry aswell. This, together with the fact that management control in the music industry has a research gap, makes it interesting to examine how record labels in the swedish music industry are using traditional or modern management control. Purpose: The purpose of this thesis is to through the examination of two record labels create an understanding of how the management control is characterized through traditional or modern management control. Method: The method used in this study is qualitative. We have through a multiple-case study at two record labels examined and created an understanding of the management control in the companies with the help of semi-structured interviews and complementary questions through mail. Conclusion: It is possible to see that the record labels has partly moved to modern management control but also that you can see a mix between the usage of traditional and modern control methods and tools.