Spelling suggestions: "subject:"atom probe"" "subject:"atom robe""
51 |
Microstructure et cinétique de précipitation dans des superalliages modèles CoAlW / Microstructure and kinetics of precipitation in CoAlW superalloysAzzam, Ahmad 25 September 2018 (has links)
Les superalliages sont des matériaux clés en aéronautique. Ces matériaux sont utilisés pour la fabrication des pièces des parties chaudes des turboréacteurs d’avion. Les recherches pour une alternative des superalliages à base de Ni avec des caractéristiques supérieurs, ont abouti en 2006 à la découverte d’une nouvelle génération de superalliage à base de cobalt basée sur le système Co-Al-W avec une microstructure γ/γ' similaire aux superalliages à base nickel. Trois nuances d’alliages avec différent ratio Al/W ont été étudiées dans ce travail. L’objectif de ce travail a été dans un premier temps d’étudier l’évolution de la microstructure à 900 °C et de comprendre les mécanismes de transformation et de dissolution de la phase γ'. Pour cela des études en MEB et en MET ont été menées sur des échantillons recuits à 900 °C pendant divers temps. Nous avons montré que la phase γ' est une phase métastable et qu’elle se dissout au profit des phases Co3W et CoAl. Nous avons mis en évidence un mécanisme de dissolution par fractionnement des précipités γ' suivant les plan denses (111) et de fautesd’empilement donnant naissance à la phase D019. Dans un second temps nous avons étudié la cinétique de précipitation dans des alliages faiblement sursaturés. Les stades de germination, de croissance et de la coalescence ont été étudiés en se focalisant sur l’évolution temporelle de la composition des phases γ et γ ׳. Les données expérimentales ont été confrontées aux toutes dernières théories de germination, croissance et coalescence développées pour les alliages multicomposants non dilués, et qui prédisent l’évolution temporelle des compositions des phases γ et γ ׳. Ainsi, nous avons montré que l’évolution temporelle des paramètres cinétiques tels que la taille moyenne et la densité de particules durant la coalescence sont assez prochesde celles prévues par la théorie de coalescence de LSW. Grâce à la sonde atomique tomographique nous avons montré que la composition en W des phases γ et γ' décroit dans le temps. La décroissance de la teneur en W en particulier dans la phase γ' est observée pour la première fois dans ces alliages et elle est due aux effets de capillarité et de couplage des fluxde diffusion. Un très bon accord avec les nouvelles théories de germination, croissance et coalescence dans les ulticomposants a été démontré. Enfin à partir des modèles théoriques et de la base thermodynamique du système ternaire CoAlW nous avons déterminé l’énergie interfaciale dont les valeurs calculées sont comprises entre 30 et 48 mJ/m2. / Superalloys are key material in aerospace industry. These materials are used to manufacturing the high temperature part of aeroengines. Currently Ni-based superalloys are the most widely used materials for high temperature applications. Researches for a new generation of superalloys with better properties have lead in 2006 to the discovery of a new stable L12 ordered, Co3(Al,W) phase embedded in the disordered γ-Co solid-solution matrix. This work aims to study the evolution of the microstructure at 900 °C and understanding the mechanism of dissolution and transformation of the γ' phase. Three different alloys with different Al/W ratios are studied here. TEM and MEB analyses are carried out on samples aged at 900 °C forvarious time. We show that γ' is a metastable phase and it dissolves in favor of B2-CoAl and D019-Co3W phases. Moreover, we highlight a mechanism of dissolution by fragmentation along the {111} close packed planes and stacking faults giving rise to D019 phase. We also study the kinetics of precipitation in the low supersaturated alloys.The early stages of precipitation of the γ' phase in a model Co based superalloy have been investigated at 900 °C using electron microscopy and atom probe tomography in the low supersaturated alloys. Nucleation, growth and coarsening stages have been studied with a focus on the temporal evolution of the precipitate composition in the light of recent theoretical developments on phase separation in multicomponent alloys. The experimental data have been confronted to the theories of nucleation and coarsening recently developed for such alloys, which are valid for non-ideal and non-dilute systems, and predict the temporal evolution of both the matrix and precipitate compositions. The rate constant for the mean size evolution of the particles, as derived from experiments, has been compared to the one predicted by the mentioned coarsening theory that accounts for a more accurate description of the thermodynamics of the phases, as compared with more classical approaches. From this comparison the γ/γ' interfacialenergy was derived and found to range between 30 and 48 mJ/m2. The exponents for the temporal evolution of average particles size, number of particles per unit volume were found identical to those for binary alloys during the coarsening regime, as expected, and the temporal evolutions of compositions in both γ and γ' phases were found to evolve as predictedby theory. Indeed, the W content in the particles, measured from atom probe tomography (APT) experiments, was found to significantly decrease with time and the observed evolution is remarkably well described by the theory and therefore is shown to originate from the competition between diffusion and capillarity.
|
52 |
Etude de biais de mesure de composition par SAT dans les matériaux semi-conducteurs. / Study of the physical mechanisms leading to compositional biases in atom probe tomography of semiconductorsDi russo, Enrico 28 September 2018 (has links)
La Sonde Atomique Tomographique (SAT) assistée par laser (La-APT) est un outil puissant pour étudier la distribution atomique 3D des espèces chimiques dans une grande variété de matériaux semi-conducteurs. Cependant, des biais de composition importants affectent les analyses de sondes atomiques révélant une composition non stœchiométrique. Dans cette thèse, une étude systématique de certains semi-conducteurs binaires (GaN, GaAs, ZnO) et ternaires (AlGaN, MgZnO) a été menée afin de: (i) obtenir une description cohérente des biais de composition en APT; (ii) identifier les mécanismes physiques à l'origine de ces biais; (iii) évaluer les conditions expérimentales pour lesquelles l'analyse compositionnelle est fiable. Afin d’interpréter les résultats, l’hypothèse de l’évaporation préférentielle d’espèces métalliques (Ga, Al, Zn, Mg) à haut champ et d’émission de molécules neutres non métalliques (N2, O2) à champ bas a été proposée. Un autre objectif important de cette thèse est orienté vers la physique des matériaux. L’étude de la composition et la morphologie de certains dispositifs d’intérêt technologique, tels que les systèmes à multi-puits quantiques, est très important. Dans cette perspective, la connaissance du champ de composition 3D et de la morphologie de ces systèmes est essentielle car ces caractéristiques déterminent leurs propriétés optiques et électriques. Pour ce faire, une approche par microscopie corrélative peut être adoptée. Cette approche a été appliquée avec succès à l'étude des multi-puits quantiques ZnO/MgZnO conçus pour les lasers à cascade quantique. Les propriétés structurales, compositionnelles et optiques ont été étudiées en effectuant la tomographie par électrons (ET) - micro-photoluminescence (µ-PL) corrélative sur les mêmes échantillons de sonde atomique. Les analyses complémentaires APT et ET donnent une image claire de la structure et de la composition du système étudié, révélant d'importants phénomènes de décomposition dans l'alliage MgZnO. En particulier, La SAT s’est révélé une technique unique pour une évaluation directe de la composition locale. De plus, la µ-PL apparait extrêmement utile pour obtenir des informations relatives à la composition, en lien avec les résultats de La-APT. Enfin, nous présentons une nouvelle approche in-situ corrélative dans laquelle les mesures APT et µ-PL sont exécutées simultanément. Grâce au développement d'une sonde atomique tomographique spécialement conçue, on démontre que la µ-PL peut être mesurée avec succès sur une pointe de sonde atomique Zn :/MgZnO pendant nos analyse. Ceci est extrêmement attrayant car cela permet de corréler strictement le signal de photoluminescence avec les volumes explorés à l'échelle nanométrique. En principe, émission depuis des d'émetteurs de lumière quantiques uniques (c'est-à-dire un seul QW ou QD) peut être révélée. La nouvelle approche présentée peut être étendue à un large éventail de matériaux, ouvrant de nouvelles perspectives pour les études corrélatives. / Laser-assisted Atom Probe Tomography (La-APT) is a powerful tool for investigating the 3D atomic distribution of the chemical species in a wide variety of semiconductor materials. However, important compositional biases affect atom probe analyses revealing a non-stoichiometric composition. In the thesis a systematic study of selected binary (GaN, GaAs, ZnO) and ternary (AlGaN, MgZnO) semiconductors of high technological interest was developed in order to: (i) obtain a coherent description of the compositional biases in APT; (ii) identify the physical mechanisms leading to these biases; (iii) assess the experimental conditions for which the compositional analysis is reliable. In order to interpret the results, the hypothesis of preferential evaporation of metallic species (Ga, Al, Zn, Mg) at high field and emission of neutral non-metallic molecules (N2, O2) at low field has been proposed. Another important aim of this thesis is materials physics-oriented. It is indeed of utmost importance to study both composition and morphology of some devices of technological interest, such as in multi-quantum-well systems. In this perspective, the knowledge of 3D composition field and morphology is essential because these features determine the optical and electrical properties of the systems. In order to do it, a correlative microscopy approach can be adopted. This approach was successfully applied to the study of ZnO/MgZnO multi-quantum wells designed for quantum cascade lasers. Structural, compositional and optical properties were investigated performing correlative La-APT - Electron Tomography (ET) - micro-PhotoLuminescence (µ-PL) on the same atom probe tip specimens. The complementary APT and ET analyses yield a clear picture of the structure and composition of the system investigated, revealing important decomposition phenomena in the MgZnO alloy. In particular, La-APT proved to be a unique technique for a direct assessment of local composition. Moreover, µ-PL also proved to be extremely useful in order to get information related the composition, supporting La-APT results. Finally, a new correlative in-situ approach in which La-APT and µ-PL are simultaneously performed is presented. Thanks to the development of a specially designed tomographic atom probe, it is shown that µ-PL can be successfully performed on a single Zno/MgZnO atom probe tip during La-APT. This is extremely attractive and challenging because allows to strictly correlating the variation photoluminescence signal with nano-metric scale volumes of the tip evaporated during APT. In principle, the emission of single quantum light emitters (i.e. single QW or QD) can be revealed. The new approach presented can be extended to a wide range of materials, opening new perspectives for correlative studies of single atom probe tips.
|
53 |
Etude structurale et cartographie du dopage dans des oxydes nanostructurés à base de sillicium. / Structural investigation and dopants mapping in silicon based nanostructured oxidesDemoulin, Rémi 19 November 2019 (has links)
La modification des propriétés optiques et électriques du silicium apportée par la réduction en taille, notamment due aux effets de confinement quantique des porteurs de charges, est aujourd'hui bien connue et a permis le développement de nouveaux systèmes en optoélectronique. Comme dans le cas du silicium massif, le dopage devrait permettre d'optimiser les propriétés du silicium nanostructuré. Cependant, les caractéristiques du dopage dans le silicium nanostructuré sont encore mal comprises et de nombreux questionnements, concernant la localisation des impuretés ainsi que leur état d'activation, restent en suspens. De plus, l'environnement des impuretés semble avoir une influence majeure sur l'ensemble des propriétés. Cette thèse vise à mieux comprendre les caractéristiques structurales du dopage à l'échelle atomique en fonction de la nature de l'impureté, de la matrice hôte et de la technique d'élaboration. Pour cela, nous avons étudié deux types de système en sonde atomique tomographique. Le premier concerne un dopage aux ions de terres rares dans les silicates d'hafnium. Nous avons mis en évidence que la formation de nano-grains de HfO2 cristallisés sous la forme cubique permet un transfert d'énergie efficace vers les ions praséodyme. Le second porte sur les dopages de type n et p de nanocristaux de silicium insérés dans la silice. Nous avons démontré l'introduction des impuretés de type n (As, P) au cœur des nanocristaux, indépendamment de la technique d'élaboration, permettant de réaliser des forts dopages. Un comportement différent a été mis en évidence pour les impuretés de type p, avec l'accumulation de Bore aux interfaces entre les nanocristaux et la matrice. / The change of silicon optical and electrical properties induced by size reduction, due to the quantum confinement of charged carriers, is a well-known effect and allowed to develop new optoelectronic devices. As in bulk silicon, doping should allow to optimize these properties in nanostructured silicon. However, the characteristics of doping of nanostructured silicon still misunderstood and many questions, concerning the location of impurities and their activation state, remain unanswered. Moreover, in these materials, the environment of impurities seems to inuence strongly all of their properties. The purpose of this thesis is to get a better understanding of structural characteristics of doping at the atomic scale in function of the nature of the impurity, the host matrix, and the elaboration technic. In this way, we have investigated two di_erent systems using atom probe tomography. The first concerns a rare earth doping of hafnium silicates. We have evidenced that the clustering of HfO2 nano-grains crystallized in their cubic form induced an efficient energy transfer with praseodymium ions. The second system concern the n and p type doping of silicon nanocrystals embedded in silica. We have demonstrated the important introduction of n type impurities (As, P) in the core of every nanocrystals, independently of the elaboration technic. This introduction of impurities should allow the formation of highly doped silicon nanocrystals. A different behavior has been observed in the case of p type doping, represented by the aggregation of Boron at the interface between the nanocrystals and the silica matrix.
|
54 |
Etude du dopage de type p dans des nanostructures de GaN par corrélation entre sonde atomique tomographique et holographie électronique hors axe optique / Investigation of p-type doping in GaN nanostructures by correlation between atom probe tomography and off-axis electron holographyAmichi, Lynda 20 December 2018 (has links)
La thèse porte sur l’étude du dopage de type p, à base de Mg, dans des nanostructures de GaN, dans le but de relier la distribution spatiale du dopant à son activité électrique grâce à la corrélation entre sonde atomique tomographique (APT) et holographie électronique hors axe optique réalisée dans un microscope électronique en transmission (TEM). L'APT est une technique de caractérisation qui repose sur l'évaporation par effet de champ des atomes de surface d'un échantillon, permettant l'analyse en termes de morphologie et de composition, en trois dimensions et à l'échelle atomique. L'holographie électronique hors axe optique fournit des cartographies du potentiel électrostatique introduit par les dopants actifs électriquement. Dans un premier temps, les conditions expérimentales ont dues être optimisées pour chacune des techniques, incluant la préparation des échantillons, les conditions de mesure ainsi que le traitement des données, de façon à obtenir des données fiables et les plus quantitatives possibles. Une analyse soigneuse et détaillée des artefacts et des erreurs qu’ils introduisent est rapportée. Il a en particulier été montré que réaliser les expériences d’holographie in-situ à haute température (400 °C) grâce à un porte-objet chauffant permettait d’augmenter très significativement le signal lié au dopage et ainsi accroitre la sensibilité de la mesure. Dans un deuxième temps, ces deux méthodes d’analyse ont été corrélées pour étudier d’une part l’influence de la température de croissance en MOCVD, d’autre part celle de la concentration nominale en dopants dans des nanostructures dédiées GaN. Nous avons pu confirmer grâce à l’APT l’existence de précipités riches en Mg dès que la concentration nominale excède environ 3E19 cm-3, dont la densité augmente avec la concentration nominale et diminue avec la température de croissance. Leur présence diminue la concentration en dopants potentiellement actifs situés dans la matrice en dehors de ces précipités. Néanmoins, les résultats obtenus par holographie, appuyés par des simulations numériques, indiquent que ces précipités n’auraient pas un rôle prépondérant dans la variation du potentiel électrostatique en fonction de la concentration nominale en dopants même pour des concentrations en Mg qui s’élèvent à 2E20cm-3. / The aim of the thesis is to develop a methodology for the investigation of Mg which acts as p-type doping in GaN. We relate the spatial distribution of the dopants with their electrical activity which is achieved by coupling two complementary approaches, Atom Probe Tomography (APT) and Off-axis electron holography. These measurements have also been combined with high-resolution electron microscopy (HR-(S)TEM) for the structural characterization. APT is a unique characterization technique, based on the field effect evaporation of individual atoms of a needle shape sample, allowing the analysis of nano-devices both in terms of morphology and composition in three dimensions at the atomic scale. Off-axis electron holography uses an electron biprism to form an interference pattern from which the electrostatic potential arising from the active dopants can be determined. In this work the experimental procedure has been optimized for both techniques including specimen preparation, the microscope parameters and data treatment to recover accurate information about the position and activity of the dopants. For the holography measurements, a careful analysis of the artifacts that are present in these specimen has been performed to understand the effects of specimen preparation and charging under electron irradiation. We have performed these experiments at high temperature in-situ in the TEM (400 °C) as this increases the ionized dopant concentrations and reduces the artifacts that are present in our measurements. Having developed the methodology, these two techniques are then used to study the effect of temperature and dopant concentrations on the growth of Mg-doped GaN by MOCVD. We have been able to show by APT the existence of precipitates of Mg which are present from a concentration of 3E19 cm-3 whose size and density depends on the growth temperature and the total nominal dopant concentration. Their presence reduces the concentration of dopants that are potentially active in the specimens. However, the measurements of active dopants by holography combined with simulations suggest that the presence of these precipitates do not dominate the electrical properties of the material and that even in very highly doped specimens up to 2E20cm-3 the total active dopant concentrations are still higher than expected from previously published studies. The correlation between these techniques will provide valuable information to improve the Mg activation GaN which is currently a big issue for device manufacture.
|
55 |
Study of the mechanisms of silicide formation by isotope diffusion and atom probe tomography / Etude des mécanismes de formation des siliciures par diffusion isotopique et sonde atomique tomographiqueLuo, Ting 16 November 2018 (has links)
Avec la réduction de taille des composants microélectroniques, le monosiliciure de nickel (NiSi) a été largement utilisé dans les transistors CMOS (Complementary-Metal-Oxide-Semiconductor) en tant que contacts pour les sources, drains et grilles. Cependant, NiSi se dégrade lors du recuit à haute température. Il apparait essentiel d'étudier la séquence de formation de phases et la stabilité du monosilicide en présence d’éléments d'alliage. Les réactions à l'état solide entre des films de Ni allié en W et/ou Pt et un substrat de Si ont été étudiées principalement par diffraction des rayons X (DRX) in-situ et sonde atomique tomographique (SAT). L'analyse combinatoire de la réaction entre des films Ni avec différents composition gradients et le Si a permis de comprendre la séquence de formation. Les concentrations des éléments d'alliage (W et Pt) ont un impact significatif sur la séquence de formation des siliciures de Ni et sur la cinétique de formation des phases. Le mécanisme d'agglomération des films minces de NiSi a également été étudié au cours de cette thèse. Un film de Ni pur de 15 nm a été déposé sur un substrat de Si enrichi de multicouches de Si isotopique. Des analyses SAT ont été effectuées sur l'échantillon de Ni/Si (isotope) après un recuit à 600°C. En observant la distribution des isotopes de Si, un mécanisme d'agglomération de NiSi a été proposé selon que les isotopes de Si restent sous forme de multicouches ou qu'ils se mélangent. Cette étude rendue possible grâce à la capacité unique de la SAT d'observer les isotopes en 3D et à l'échelle atomique apporte une meilleure compréhension de l'agglomération de films minces poly-cristallin d'intermétallique / With the downscaling of microelectronic devices, NiSi has been widely used in complementary-metal-oxide-semiconductor (CMOS) transistors as contact on source, drain and gate. However, NiSi suffers from degradation upon annealing at high temperatures. Adding alloying elements is an effective method to increase the stability of nickel monosilicide but the formation sequence of Ni silicides is substantially modified. Therefore, the studies of the phase formation sequence and the stability of monosilicide are of great importance.The solid-state reactions between Ni films alloyed with W and/or Pt and Si substrates were studied mainly by in-situ X-ray diffraction (XRD) and atom probe tomography (APT) using combinatorial analysis of co-deposited gradient films. The phase sequence was monitored by in-situ XRD and APT was used to examine the silicides and reveal the redistribution of alloying elements. The content of alloying elements (W and Pt) has a large impact on the phase sequence of Ni silicides and the kinetics of phase formation. The basic agglomeration mechanism of NiSi thin films was studied. A 15nm pure Ni film was deposited on a Si substrate enriched with isotope multilayers. APT analyses were performed on the sample of Ni/Si (isotope) after an annealing at 600°C. By observing the distribution of Si isotopes (30Si, 29Si and 28Si), whether they maintain a multilayer structure or are mixed together, a mechanism of the agglomeration of NiSi was proposed. This was possible because of the unique capability of APT to observe isotopes in 3D at the atomic scale and it allows a better understanding and to control of the agglomeration of poly-crystalline compound thin films
|
56 |
Structural Characterization Of Sputter-deposited Ss304+xal (x = 0, 4, 7 And 10 Wt.%) Coatings And Mechanically Milled Ti, Zr AndSeelam, Uma Maheswara 01 January 2010 (has links)
Study of the metastable phases obtained by non-equilibrium processing techniques has come a long way during the past five decades. New metastable phases have often given new perspectives to the research on synthesis of novel materials systems. Metastable materials produced by two non-equilibrium processing methods were studied for this dissertation- 304-type austenitic stainless steel (SS304 or Fe-18Cr-8Ni)+aluminum coatings produced by plasma enhanced magnetron sputter-deposition (PEMS) and nanocrystalline Ti, Zr and Hf powders processed by mechanical milling (MM). The objective of the study was to understand the crystallographic and microstructural aspects of these materials. Four SS304+Al coatings with a nominal Al percentages of 0, 4, 7 and 10 wt.% in the coatings were deposited on an SS304 substrate by PEMS using SS304 and Al targets. The as-deposited coatings were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and three-dimensional atom probe microscopy (3DAP). Surface morphology and chemical analysis were studied by SEM. Phase identification was carried out by XRD and TEM. The microstructural features of all the coatings, as observed in the TEM, consisted of columnar grains with the columnar grain width (a measure of grain size) increasing with an increase in the Al content. The coatings had grains with average grain sizes of about 100, 290, 320 and 980 nm, respectively for 0, 4, 7 and 10 wt.% Al. The observed grain structures and increase in grain size were related to substrate temperature during deposition. XRD results indicated that the Al-free coating consisted of the non-equilibrium ferrite and sigma phases. In the 4Al, 7Al and 10Al coatings, equilibrium ferrite and B2 phases were observed but no sigma phase was found. In 10Al coating, we were able to demonstrate experimentally using 3DAP studies that NiAl phase formation is preferred over the FeAl phase at nano scale. During mechanical milling of the hexagonal close packed (HCP) metals Hf, Ti and Zr powders, unknown nanocrystalline phases with face centered cubic (FCC) structure were found. The FCC phases could be either allotropes of the respective metals or impurity stabilized phases. However, upon MM under high purity conditions, it was revealed that the FCC phases were impurity stabilized. The decrease in crystallite size down to nanometer levels, an increase in atomic volume, lattice strain, and possible contamination were the factors responsible for the transformation.
|
57 |
Advanced Microstructural Characterization of Thoria and Uranium-Zirconium Nuclear Fuels by Correlative Atom Probe Tomography and Transmission Electron MicroscopyAmrita Sen (14230940) 07 December 2022 (has links)
<p> </p>
<p>The next generation of nuclear reactor designs promise to provide clean, safe, and efficient energy to address our current climate crisis. But with these new technologies, nuclear fuel materials must be carefully designed and understood to meet these demands. Candidate oxide and metallic nuclear fuel materials being considered for use in these new reactor technologies, despite their potential, still have significant remaining materials challenges in understanding their long-term performance and integrity under extreme reactor conditions. As such these candidate fuels require extensive materials characterization to understand their long-term performance under reactor conditions. The objective of this study is to evaluate the microstructural evolution of candidate fuels U-50wt%Zr and ThO2 under the following contexts: 1) Investigation of phase stability in candidate metallic fuel U-50wt%Zr under thermal and irradiation treatment; 2) Investigate localized thermal properties of candidate oxide fuel ThO2 under irradiation through a novel correlative microscopy approach. </p>
<p>The influence of thermal and irradiation treatment on phase stability in δ-U50wt%Zr was investigated through conventional APT-TEM methodology. U-Zr is a candidate metallic fuel for advanced fast reactor applications. However, there is still work remaining to better understand how these materials evolve under extreme reactor conditions, especially for the δU-50wt%Zr composition. Metallic fuels are susceptible to significant chemical redistribution under extreme conditions resulting in potential degradation of fuel properties and performance. In these experiments, U-50wt%Zr was subjected to thermal annealing and proton irradiation respectively. These treatments produced very different modulated structures in U-50wt%Zr, and the implications of such on phase stability in U-50wt%Zr will be discussed.</p>
<p>Additionally, long-term nuclear reactor operation hinges upon efficient thermal transport in nuclear fuels. There is a critical need to understand localized thermal transport in these materials to enable intelligent design of high-performance fuels. A novel correlative atom probe tomography (APT)-transmission electron microscopy (TEM) approach was developed to investigate the influence of irradiation defects on localized thermal diffusivity in ThO2 upon proton irradiation, and implications of such results will be discussed. </p>
|
58 |
Experimental study of phase separation in Fe-Cr based alloysZhou, Jing January 2013 (has links)
Duplex stainless steels (DSSs) are important engineering materials due to their combination of good mechanical properties and corrosion resistance. However, as a consequence of their ferrite content, DSSs are sensitive to the so-called ‘475°C embrittlement’, which is induced by phase separation, namely, the ferrite decomposed into Fe-rich ferrite (α) and Cr-rich ferrite (α'), respectively. The phase separation is accompanied with a severe loss of toughness. Thus, the ‘475°C embrittlement’ phenomenon limits DSSs’ upper service temperature to around 250°C. In the present work, Fe-Cr binary model alloys and commercial DSSs from weldments were investigated for the study of phase separation in ferrite. Different techniques were employed to study the phase separation in model alloys and commercial DSSs, including atom probe tomography, transmission electron microscopy and micro-hardness test. Three different model alloys, Fe-25Cr, Fe-30Cr and Fe-35Cr (wt. %) were analyzed by atom probe tomography after different aging times. A new method based on radial distribution function was developed to evaluate the wavelength and amplitude of phase separation in these Fe-Cr binary alloys. The results were compared with the wavelengths obtained from 1D auto-correlation function and amplitudes from Langer-Bar-On-Miller method. It was found that the wavelengths from 1D auto-correlation function cannot reflect the 3D nano-scaled structures as accurate as those obtained by radial distribution function. Furthermore, the Langer-Bar-On-Miller method underestimates the amplitudes of phase separation. Commercial DSSs of SAF2205, 2304, 2507 and 25.10.4L were employed to investigate the connections between phase separation and mechanical properties from different microstructures (base metal, heat-affected-zone and welding bead) in welding. Moreover, the effect of external tensile stress during aging on phase separation of ferrite was also investigated. It was found that atom probe tomography is very useful for the analysis of phase separation in ferrite and the radial distribution function (RDF) is an effective method to compare the extent of phase separation at the very early stages. RDF is even more sensitive than frequency diagrams. In addition, the results indicate that the mechanical properties are highly connected with the phase separation in ferrite and other phenomena, such as Ni-Mn-Si-Cu clusters, that can also deteriorate the mechanical properties. / <p>QC 20130308</p>
|
59 |
Computational Modeling of Atom Probe TomographyWithrow, Travis P. 12 December 2018 (has links)
No description available.
|
60 |
Mikrostruktur von Lithium-Mangan-Oxid / Microstructure of Lithium Manganese OxideMaier, Johannes 06 December 2016 (has links)
No description available.
|
Page generated in 0.1833 seconds