Magister Legum - LLM

Magister Legum - LLM

Magister Philosophiae - MPhil / Background: Professional health assistance is a significant indicator in monitoring progress towards Millennium Development Goal five to reduce the maternal mortality ratio by three quarters and child mortality by two-thirds between 1990 and 2015. It is also significant that mothers deliver their babies in an appropriate setting, where life saving equipment and hygiene can also help reduce the risk of complications that may cause death or illness to mother and child. But in developing countries access to health services is still an issue. Objective: From a fundamental research view point, this study aims to investigate the determinants of place of delivery and professional health providers by analysing the factors that are likely to influence young mothers’ accessibility and use of prenatal facilities in the developing world. Specifically in Kenya, Ethiopia, Nepal, Bangladesh, Guyana and Haiti. Methodology: Univariet and bivariet analysis were performed to determine a relation or association between dependent and independent variables. Using secondary data from Demographic and Health Survey secondary data requested from the DHS selected between 2005 and 2010, the analysis was performed by means of SPSS software. Bringing together the demographic variables and access and the use of health services related variables, the study captures the differences and similarities across these countries. Results: The study has identified the main factors influencing the use of professional health providers and health facilities according to the variables examined from the DHS. The finding showed the use health facilities for delivery, professional health providers were influenced by economic status of young mothers, level of education, place of residence, religion, marital status, in all six countries. Access to health facilities was much influence availability of transport, the presence of health providers at facilities and availability of drugs at facilities. Family members’ knowledge about the importance of delivering a baby at health facilities was found to be the strongest predictors of use of health facilities for delivery in all six countries. These findings suggest that these factors cited are associated with access and use of professional health providers and health facilities, and should be the target of interventions aimed to increase the use of prenatal facilities and professional health providers among young women in these countries in order to improve maternal and child health in accordance with Millennium Development Goals four and five.

In the early 1990s, the United Nations (UN) recognized water as a finite resource to the entire ecosystem with an economic value that should be developed and managed based on the participatory approach using the Integrated Water Resource Management (IWRM) strategy. Many studies on water management practices have thus emerged in the developing world. Of particular interest to this work is the management of water through metering, price-setting, and rule enforcement in the rural setting in piped, community-owned water systems. There is very little published information regarding metering, enforcement experiments, and experiences in these systems. This is because metering and enforcement mechanisms are not typically included in rural piped community-managed water supply system design and water committee training schemes. Along with an increase in population growth and changing climate patterns, there is a burgeoning interest to manage demand and reduce non-revenue water (NRW) in urban utilities in developing countries. Metering is often the demand management tool considered because it has been reported to increase customer payment rates as well as social equity. Rural, community-managed systems often suffer high failure rates due to the lack of preventative maintenance, which maybe closely linked to customer dissatisfaction and non-payment of tariffs. The inclusion of a metering and enforcement program to such systems may help to address the problem of high rates of premature failure. An inclusion of a metering program for rural community-managed water supply systems is a non-trivial task in terms of cost as well as the system designer’s time, thus there is significant interest in ensuring such a program’s success. Many field workers may have familiarity with water system design but not specifically in the area of water flow metering and currently no beginner-level resources are publicly available. This work is ultimately intended to facilitate the inclusion of metering into rural, piped, community-managed water supply systems through: 1) compilation of technical information regarding metering which would be accessible to field practitioners and relevant to the rural community-managed setting, 2) a proposed decision-making tool to facilitate the selection of the most appropriate meter for the community, 3) proposed installation tips, and 4) suggested strategies for including metering into the community-management model. Objectives 1, 3, and 4 were pursued via review of industry, peer-reviewed, and field literature along with the author’s personal experience. Multiple criteria decision analysis (MCDA) was the method proposed for aiding in the selection of the most appropriate meter type. It was determined that four types of meters are used for residential metering in developed and developing urban utility-managed systems: the nutating disc, oscillating piston, multi-jet, and single-jet. The nutating disc and oscillating piston meters operate through a volumetric or displacement mechanism, while the single- and multi-jet meters function through a velocity or non-displacement mechanism. While a lot of variation between models of meters exists, there are fewer characteristics that can be used to differentiate between mechanisms. After applying the multiple-criteria decision analysis to aid in the selection of the most appropriate meter for a rural, community-managed systems, the nutating disc and oscillating piston types of meters were most preferred under the set of criteria chosen by the author for the purpose of example in this analysis. It is recommended that meter selection be performed on a site-specific basis with local stakeholder involvement for criteria determination. Meter installation is similar for all four types of meters and whichever type of meter is chosen, it should be protected from tampering. Increasing-block pricing is recommended to accompany metering in order to motivate water conservation. The size and price of the initial block of water should be determined according to the system’s operation and maintenance costs as well as users’ willingness to pay information. Field practitioners should prepare the community to take over the metering program by providing basic training to the users and selected meter readers/technicians.

The aim of the project was to make a detailed risk assessment using Swedish guidelines for a factory site in Kodaikanal, South India, and a nearby village called Vellagavi. The study areas were chosen due to previous records of mercury contamination on the factory site and a possible spread to Vellagavi. A comparison between Indian and Swedish guidelines for risk assessment of contaminated areas was performed. The purposes of comparing the two systems were to locate if there were any differences in the legislation, or guidelines, and to find ways of improving the processes. The project also included an evaluation of possible remedial actions that could reverse or prevent environmental damage that might be caused by the former factory. Methods used for the project were literature studies, semi-structured interviews and surveys. The results from the risk assessment were that the Swedish Computer Program for Calculation of Guideline Values (CPCGV), with some adjustments, could be used in order to calculate site specific guideline values for mercury concentrations on sites similar to Swedish conditions, such as climate. The site specific guideline values in soil rangedfrom 0.1-2.4 mg/kg. An Indian court decision had stated that a guideline value of 20 mg/kg should be used for remediation at the factory site. The result from the forward dose calculation showed that when a soil contains 20 mg/kg,the tolerable daily intake of mercury would be exceeded, and therefore pose a risk to human health. The comparison of legislation systems between India and Sweden showed several differences. India did not have any legislation relating directly to polluted soil. Risk assessments in India commonly relied on several different international standards even though the standards were not regulated by law. The results from the remedial evaluation showed that there were several possible remediation methods that could beused on the factory site. Limited remedial actions were suggested for Vellagavi since there were no measurements taken on site. Preferably, remediation should take place at the source of the contamination, i.e. the factory site. / Det övergripande målet med projektet var att genomföra en detaljerad riskbedömning för en fabriksplats i Kodaikanal, södra Indien, samt för en närliggande by, Vellagavi. Tidigare genomförda mätningar uppvisade förhöjda halter av kvicksilver i området, varför det ansågs vara ett lämpligt område för studien. Studien innehöll en jämförelse av riktlinjer för riskbedömningar för förorenad mark mellan Indien och Sverige där syftet var att identifiera skillnader i lagstiftning och riktlinjer samt lokalisera eventuella förbättringsmöjligheter. Studien innefattades även av en åtgärdsutredning för fabriksplatsen och Vellagavi, vars syfte var att utreda vilka åtgärder som skulle kunna minska risken för fortsatt miljöförstöring eller återställa området. Metoderna som användes i studien var litteraturstudier, semi-strukturerade intervjuer och en enkätundersökning. Resultatet från riskbedömningen visade att beräkningsverktyget för platsspecifika riktvärden från Naturvårdsverket kunde användas på platser som liknar Sverige klimatmässigt, efter att diverse justeringar hade gjorts. Beräkningsverktyget användes för att ta fram ett platsspecifikt gränsvärde för kvicksilverkoncentrationen i marken. Det framtagna platsspecifika gränsvärdet för koncentrationen kvicksilver i jord varierade mellan 0,1-2,4 mg/kg. Ett beslut utfärdat av indisk domstol angav att fabriksplatsen skulle saneras så att kvicksilverkoncentationen i marken inte skulle överskrida 20 mg/kg. Resultatet från den här studien visade att den nivån av förorening i marken skulle innebära att det tolerabla dagliga intaget av kvicksilver skulle överskridas. En jämförelse av de juridiska systemen som anknöt till förorenad jord i Indien respektive Sverige visade på flertalet skillnader mellan länderna. Indien hade ingen lagstiftning som speficikt reglerade förorenad jord medan det i Sverige reglerades av Miljöbalken. Riskbedömningar i Indien baserades ofta på internationella standarder, med det fanns ingen lagstifting som reglerade vilka standarder som skulle användas. Resultatet från åtgärdsutredningen var att det fanns flera olika åtgärdsmetoder som skulle kunna användas för att sanera fabriksplatsen. Åtgärdsutredningen för Vellagavi var begränsad eftersom det inte fanns tillräckligt mycket mätdata för området. Företrädesvis bör saneringsåtgärderna vidtas vid föroreningskällan, vilket i detta fall är fabriksplatsen.

The master thesis focuses on the process of implementation of global strategies to the national policy of the Czech Republic. The thesis is a case study. Its subject is global strategy the 2030 Agenda for Sustainable Development and the Czech strategic framework Czech Republic 2030. The first part of the thesis presents current knowledge of the sustainable development and dealing with global strategies in this field in the Czech Republic. The theoretical background of the own research is a theory of politics network and a theory of global governance. The aim of the thesis is not only to describe and explain the process of implementation of the 2030 Agenda for Sustainable Development to the Czech national policy, but also to define roles of groups of actors and to evaluate the participatory approach which was newly chosen for the Czech Republic 2030. The second part of the thesis is focused on the own research which was based on the analysis of relevant documents and semi-structured interviews with eleven experts (representatives of the Public administration, private sector, trade union, academic community and NGOs). One of the main contributions of this thesis is a comparison of the process of creating the Czech strategic framework for sustainable development from 2010 and the new system that was...

The purpose of the study was to determine if there were significant differences in the perceived importance and responsibility of student development goals between chief academic officers (CAOs) and chief student affairs officers (CSAOs). The population for this study consisted of CAOs and CSAOs at liberal arts institutions located in 15 southern states.

The world is jeopardized by several social and environmental threats. The limited resources are being used at a rapid rate which contributes to negative effects on global warming. Along with increased poverty, human rights are being violated and labor is exploited. Therefore, sustainability is perhaps a more urgent topic than ever. CSV is proposed as an answer to these environmental and social threats, which is identified by a gap in the concept of CSR. Sweden is a leading country in terms of sustainability, and therefore the purpose is to gain knowledge on how Swedish companies work with shared value creation in their sustainable practices. This study follows an interpretive philosophy through a qualitative study, and semi-structured interviews are conducted with six companies. The empirical data is analyzed through coding where four themes are evolved. This study develops existing concepts through an inductive approach and further proposes that the companies pursue CSV by the mediating role of CSR. Sustainable innovation, innovative raw materials, and digitalization are the major contributors to shared value creation. Sustainable development goals and science-based targets are essential tools to guide companies toward a sustainable future. However, two barriers to pursuing shared value creating activities are being a small company and adapting to the local context.

In 2015, the United Nations (UN) put forward 17 Sustainable Development Goals (SDGs) to beachieved by 2030. Each member state should spare no effort to fulfill the goals for better lives. Thefirst objective of this study was to explore how Big Data could be used to monitor the progress,including the opportunities and challenges that such novel technologies brought. Previous studieswere reviewed critically for the first objective. The second objective was to find out what datainfrastructures were helpful in monitoring the achievement of SDG 7. A systematic mapping studywas performed to accomplish the second objective. 53 SDG-related academic papers were obtained.Their research data and where they were sourced from were manually analyzed and categorized togenerate data infrastructures for SDG 7. Besides, the automated qualitative coding was conductedbased on the manual structure to verify the manually identified data infrastructures and comparetheir frequencies in the selected papers. The methodology of combining manual and automatedqualitative analysis proposed in this study helped find a list of SDG 7 related data infrastructures.Although there were differences between the manual and automated results, the World Bank, UNdatabases, Eurostat, and IEA were considered the most frequently referred data sources; electricitydata and satellite imagery were regarded as the most commonly used data types.

In jeder Produktentwicklung ist besonders die Abstimmung deren Ziele und Inhalte zu Beginn wichtig. Klare Kommunikation und übereintreffendes Verständnis der Aufgabenstellung legen den Grundstein für eine erfolgreiche Entwicklung. Bisher werden Entwicklungsziele im Maschinenbau hauptsächlich in detaillierten Anforderungslisten (Peschges, 2015), Pflichtenheften und Lastenheften (Bender et al., 2018, Jacoby, 2019) festgehalten, die aufgrund ihres Detaillierungsgrades nicht auf einen Blick erfassbar oder präsentierbar sind. Auch in anderen Branchen gibt es Methoden zur Zieldefinition, die jedoch meist nur Teilaspekte einer Entwicklung abbilden können. Im Industriedesign beispielsweise wird unter anderem mit sogenannten schriftlichen Design Briefs (Rao, 2017) gearbeitet, die die Entwicklungsziele feststecken. Mithilfe des Visionsmodells werden verschiedene Herangehensweisen in Kombination mit Erfahrungswissen aus der Industrie zu einer ganzheitlichen und verständlichen Methode verbunden. [... aus der Einleitung]