<p>This paper presents the energy saving curtains, in order to make the</p><p>consumers be more aware of the energy efficiency of the energy saving</p><p>curtains, the paper gave related analysis and conclusions.</p><p>The work was performed by using the Parasol Program, developed by Lunds University, Sweden. The Program is used for quantifying the influence of window size, glass type, textile type, wall thermal insulation and sun shading on annual energy use and indoor thermal comfort. The results which are obtained from the calculations are applicable to similar climatic and environment conditions. Calculations were performed to investigate the potential for using sunshade devices to reduce annual energy demand for cooling and heating. Different materials and dimensions of the energy saving</p><p>curtain are used as variables in the analysis. The results indicated that for the current climatic conditions and other related factors, the total reduction rate of the annual energy consumption of office used buildings in Stockholm is estimated generally 20% -30% lower comparing to those buildings without energy saving curtain system. That means at least 20% of energy cost can be saved by the energy saving curtain system.</p>

This paper presents the energy saving curtains, in order to make the consumers be more aware of the energy efficiency of the energy saving curtains, the paper gave related analysis and conclusions. The work was performed by using the Parasol Program, developed by Lunds University, Sweden. The Program is used for quantifying the influence of window size, glass type, textile type, wall thermal insulation and sun shading on annual energy use and indoor thermal comfort. The results which are obtained from the calculations are applicable to similar climatic and environment conditions. Calculations were performed to investigate the potential for using sunshade devices to reduce annual energy demand for cooling and heating. Different materials and dimensions of the energy saving curtain are used as variables in the analysis. The results indicated that for the current climatic conditions and other related factors, the total reduction rate of the annual energy consumption of office used buildings in Stockholm is estimated generally 20% -30% lower comparing to those buildings without energy saving curtain system. That means at least 20% of energy cost can be saved by the energy saving curtain system.

A single electron in a quantum cyclotron provides the most precise measurement of the electron magnetic moment, given in units of the Bohr magneton by g/2 = 1.001 159 652 180 73 (28) [0.28 ppt]. The most precise determination of the fine structure constant comes from combining this measurement with Standard Model theory, yielding \(\alpha^{-1} = 137.035 999 173 (34)\) [0.25 ppb], limited by the experimental uncertainty of the electron g-value. The most stringent test of CPT symmetry in leptons comes from comparing the electron and positron magnetic moments, limited by the positron uncertainty at 4.2 ppt. A new high-stability apparatus has been built and commissioned for improved measurements of the electron and positron magnetic moments, a greatly improved test of lepton CPT symmetry, and an improved determination of the fine structure constant. These new measurements require robust positron loading from a retractable radioactive source that is small enough to avoid compromising the high-precision environment of our experiment. The design and implementation of such a scheme is a central focus of this work. Robust positron loading at a rate of \(1-2 e^+/min\) from a \(6.5 \mu Ci^{22}Na\) source has been demonstrated. / Physics

This thesis focuses on one important component of the energy system - the window. Windows are installed in buildings mainly to create visual contact with the surroundings and to let in daylight, and should also be heat and sound insulating. This thesis covers four important aspects of windows: antireflection and switchable coatings, energy simulations and optical measurements. Energy simulations have been used to compare different windows and also to estimate the performance of smart or switchable windows, whose transmittance can be regulated. The results from this thesis show the potential of the emerging technology of smart windows, not only from a daylight and an energy perspective, but also for comfort and well-being. The importance of a well functioning control system for such windows, is pointed out. To fulfill all requirements of modern windows, they often have two or more panes. Each glass surface leads to reflection of light and therefore less daylight is transmitted. It is therefore of interest to find ways to increase the transmittance. In this thesis antireflection coatings, similar to those found on eye-glasses and LCD screens, have been investigated. For large area applications such as windows, it is necessary to use techniques which can easily be adapted to large scale manufacturing at low cost. Such a technique is dip-coating in a sol-gel of porous silica. Antireflection coatings have been deposited on glass and plastic materials to study both visual and energy performance and it has been shown that antireflection coatings increase the transmittance of windows without negatively affecting the thermal insulation and the energy efficiency. Optical measurements are important for quantifying product properties for comparisons and evaluations. It is important that new measurement routines are simple and applicable to standard commercial instruments. Different systematic error sources for optical measurements of patterned light diffusing samples using spectrophotometers with integrating spheres have been investigated and some suggestions are made for how to avoid such errors.

Résumé : Les ions hydronium (H3O + ) sont formés, à temps courts, dans les grappes ou le long des trajectoires de la radiolyse de l'eau par des rayonnements ionisants à faible transfert d’énergie linéaire (TEL) ou à TEL élevé. Cette formation in situ de H3O + rend la région des grappes/trajectoires du rayonnement temporairement plus acide que le milieu environnant. Bien que des preuves expérimentales de l’acidité d’une grappe aient déjà été signalées, il n'y a que des informations fragmentaires quant à son ampleur et sa dépendance en temps. Dans ce travail, nous déterminons les concentrations en H3O + et les valeurs de pH correspondantes en fonction du temps à partir des rendements de H3O + calculés à l’aide de simulations Monte Carlo de la chimie intervenant dans les trajectoires. Quatre ions incidents de différents TEL ont été sélectionnés et deux modèles de grappe/trajectoire ont été utilisés : 1) un modèle de grappe isolée "sphérique" (faible TEL) et 2) un modèle de trajectoire "cylindrique" (TEL élevé). Dans tous les cas étudiés, un effet de pH acide brusque transitoire, que nous appelons un effet de "pic acide", est observé immédiatement après l’irradiation. Cet effet ne semble pas avoir été exploré dans l'eau ou un milieu cellulaire soumis à un rayonnement ionisant, en particulier à haut TEL. À cet égard, ce travail soulève des questions sur les implications possibles de cet effet en radiobiologie, dont certaines sont évoquées brièvement. Nos calculs ont ensuite été étendus à l’étude de l'influence de la température, de 25 à 350 °C, sur la formation in situ d’ions H3O + et l’effet de pic acide qui intervient à temps courts lors de la radiolyse de l’eau à faible TEL. Les résultats montrent une augmentation marquée de la réponse de pic acide à hautes températures. Comme de nombreux processus intervenant dans le cœur d’un réacteur nucléaire refroidi à l'eau dépendent de façon critique du pH, la question ici est de savoir si ces fortes variations d’acidité, même si elles sont hautement localisées et transitoires, contribuent à la corrosion et l’endommagement des matériaux. / Abstract : Hydronium ions (H3O+) are formed within spurs or tracks of the low or high linear energy transfer (LET) radiolysis of pure, deaerated water at early times. The in situ radiolytic formation of H3O+ renders the spur and track regions temporarily more acid than the surrounding medium. Although experimental evidence for an acidic spur has already been reported, there is only fragmentary information on its magnitude and time dependence. In this work, spur or track H3O+ concentrations and the corresponding pH values are obtained from our calculated yields of H3O+ as a function of time, using Monte Carlo track chemistry simulations. We selected four impacting ions and we used two different spur and track models: 1) an isolated “spherical” spur model characteristic of low-LET radiation and 2) an axially homogeneous “cylindrical” track model for high-LET radiation. Very good agreement was found between our calculated time evolution of G(H3O+) in the radiolysis of pure, deaerated water by 300-MeV incident protons (which mimic 60Co gamma/fast electron irradiation) and the available experimental data at 25 °C. For all cases studied, an abrupt transient acid pH effect, which we call an “acid spike”, is observed during and shortly after the initial energy release. This acid-spike effect is virtually unexplored in water or in a cellular environment subject to the action of ionizing radiation, especially high-LET radiation. In this regard, this work raises a number of questions about the potential implications of this effect for radiobiology, some of which are briefly evoked. Our calculations were then extended to examine the effect of temperature from 25 to 350 °C on the yield of H3O+ ions that are formed in spurs of the low-LET radiolysis of water. The results showed an increasingly acidic spike response at higher temperatures. As many in-core processes in a water-cooled nuclear reactor critically depend on pH, the question here is whether these variations in acidity, even highly localized and transitory, contribute to material corrosion and damage.

När byggnader projekteras används klimatfiler från 1981-2010 för att dimensionera konstruktionen och energisystemet. Detta leder till att byggnader dimensioneras för ett klimat som varit och inte ett framtida klimat. SMHI har tagit fram olika klimatscenarier för framtiden som beskriver möjliga utvecklingar klimatet kan ta beroende på fortsatt utsläpp av växthusgaser. Dessa scenarier kallas för RCP (Representative Concentration Pathways). I denna studie används två olika klimatscenarier, RCP4,5 och RCP8,5. Siffran i namnet står för den strålningsdriving som förväntas uppnås år 2100. I RCP4,5 kommer medelårstemperaturen öka med 3 °C fram till år 2100 jämfört med referensperioden 1961-1990.  För samma tidsperiod sker en ökning på 5 °C enligt RCP8,5.  Ett flerbostadshus certifierad enligt Miljöbyggnad 2.2 nivå silver placerat i Vallentuna i Stockholms län används i denna studie som referensbyggnad. Byggnaden simuleras i programmet IDA ICE där den utsätts för RCP4,5 och RCP8,5. Resultatet visar att byggnaden inte skulle klara av kraven för Miljöbyggnad 2.2 gällande termiskt klimat sommar i något av de två klimatscenarierna. De operativa temperaturerna blir för höga i byggnaden utan att tillsätta komfortkyla.  Byggnaden ändras för att se vilka faktorer som kan förbättra resultatet gällande det termiska klimatet. Resultatet visar att värmelagringsförmåga hos byggmaterial och solavskärmning har störst påverkan på det termiska klimatet.  I studien gjordes flertal olika kombinationer av byggnadsutformningar. Enbart kombinationen av en tung stomme av betong tillsammans med fönster med lägre g-värde klarar kraven för Miljöbyggnad 2.2 i RCP4,5 och RCP8,5 utan komfortkyla. Kombinationen får lägst energianvändning i RCP8,5 av de olika kombinationerna som testats i studien.  En kombination av tung stomme av KL-trä med lågt U-värde, fönster med lägre g-värde och komfortkyla får lägst energianvändning i grundklimatet och RCP4,5 av de olika kombinationerna som testats i studien trots användningen av komfortkyla.  Frågan om vilket alternativ som är bäst ur ett hållbarhetsperspektiv är svårt att svara på. Det finns många aspekter som behöver tas i hänsyn till som byggnadens totala klimatavtryck både i tillverkning och användning. Oavsett val av konstruktion är det viktigt att projektera för att komfortkyla och solavskärmning skall kunna appliceras när ett varmare klimat råder. / When buildings are designed climate files from 1981 to 2010 are used to construct the building and its energy system. This leads to building being designed to a climate that has been and not to a future warmer climate that will come. SMHI has developed different climate scenarios for the future that describe different paths the climate can take depending on continued emissions of greenhouse gas. This climate scenarios are called RCP (Representative Concentration Pathways) In this study two of the climate scenarios, RCP4,5 and RCP8,5 are used. The number in the name stands for the radiation forcing that is expected in the year 2100.  In RCP4,5 the mean average air temperature will increase with 3 °C until year 2100 compared to the reference period 1961-1990. In the same time period RCP8,5 will increase with 5 °C.  An apartment building certified according to Miljöbyggnad 2.2 level silver placed in Vallentuna, Stockholms län is used as a reference building. The building is simulated through the simulation software program IDA ICE where it´s exposed to RCP4,5 and RCP8,5. The results demonstrate that the reference building would not meet Miljöbyggnad 2.2 requirement in the indicator about thermal comfort during summer. The operative temperature in the building is too high unless comfort cooling is used.  The design of the building changes to see what factors can improve the results regarding the thermal comfort. The results demonstrate that thermal conductivity and solar shading has the greatest impact on thermal comfort.  In this study several combinations of different building designs were made. Only the combination of a concrete frame with windows with low g-value met the requirement of Miljöbyggnad 2.2 regarding the thermal comfort during summer without using comfort cooling in RCP4,5 and RCP8,5. The combination had the lowest energy demand in RCP8,5 of all the combinations tested in the study.  A combination of cross laminated wood frame with low U-value, windows with low g-value and comfort cooling had the lowest energy demand in the original climate file and RCP4,5 despite the use of comfort cooling.  The questing about which building construction is the best from a sustainable perspective is difficult to answer. To answer that question the building´s total climate footprint in both production and use must be calculated. Regardless of the choice of building construction it is important to have in mind when designing a building that comfort cooling and solar shading should be easily applied when a warmer climate will prevail.