Tese de mestrado integrado. Engenharia Civil. Faculdade de Engenharia. Universidade do Porto. 2011

Aging infrastructure and personnel, combined with stricter financial constraints has put maintenance, or more popular Asset Management, at the top of the agenda for most power utilities. At the same time the industry reports that this area is not properly supported by information systems. Today’s power utilities have very comprehensive and complex portfolios of information systems that serve many different purposes. A common problem in such heterogeneous system architectures is data management, e.g. data in the systems do not represent the true status of the equipment in the power grid or several sources of data are contradictory. The research presented in this thesis concerns how this industrial problem can be better understood and approached by novel use of the ontology standardized in the Common Information Model defined in IEC standards 61970 & 61968. The theoretical framework for the research is that of data management using ontology based frameworks. This notion is not new, but is receiving renewed attention due to emerging technologies, e.g. Service Oriented Architectures, that support implementation of such ontological frameworks. The work presented is empirical in nature and takes its origin in the ontology available in the Common Information Model. The scope of the research is the applicability of the CIM ontology, not as it was intended i.e. in systems integration, but for analysis of business processes, legacy systems and data. The work has involved significant interaction with power distribution utilities in Sweden, in order to validate the framework developed around the CIM ontology. Results from the research have been published continuously, this thesis consists of an introduction and summary and papers describing the main contribution of the work. The main contribution of the work presented in this thesis is the validation of the proposition to use the CIM ontology as a basis for analysis existing legacy systems. By using the data models defined in the standards and combining them with established modeling techniques we propose a framework for information system management. The framework is appropriate for analyzing data quality problems related to power systems maintenance at power distribution utilities. As part of validating the results, the proposed framework has been applied in a case study involving medium voltage overhead line inspection. In addition to the main contribution, a classification of the state of the practice system support for power system maintenance at utilities has been created. Second, the work includes an analysis and classification of how high performance Wide Area communication technologies can be used to improve power system maintenance including improving data quality. / QC 20100614

Syftet med den här studien är att förbättra informationsflödet från projektering och produktion in i förvaltningen. Detta för att väcka ett intresse hos förvaltare och för att visa att det finns pengar att spara genom att ta hand om informationen från projekteringen och produktionen. Tidigare studier inom området BIM visar att stor fokus läggs på projektering och produktion men det är ett väldigt litet fokus på förvaltningen när man talar om BIM. Målet är att konkret kunna visa vad informationen är värd och att visa vilken information förvaltare använder och var den finns i byggprocessens skeden före förvaltningen. Rapporten bygger på en litteraturstudie, intervjuer och beräkningar. Förvaltare har blivit tillfrågade vilken information de använder i förvaltningen och sedan har projektör och entreprenör blivit tillfrågad ifall denna information finns att tillgå i projekteringen och produktionen. Värderingen av informationen har sedan gått till på två sätt. Det ena sättet är att bedöma kostnaden av att uppdatera information mot kostnaden att ta fram information på nytt. Det andra sättet är att med hjälp av nyckeltal (kronor per kvadratmeter) och den lista med typ av information som förvaltare använder, som sammanställts från intervjuerna, ta reda på vad information är värd. Det första sättet att värdera visar att det kostar lika mycket att hålla relationsritningar (A) uppdaterade i som minst 18år och i som mest 50år som att ta fram informationen helt på nytt. Nästan samma gäller för BIM-modell med avseende på relationsritningar (A). Fast där är kostnaden för framtagning på nytt lika stor som att hålla den uppdaterad i som minst 22år och i som mest 58år. Det andra sättet att värdera visar att mindre än 25% av den information man kan finna i projekteringen och eller i produktionen är värd cirka 10% av projekteringskostnaden. / The purpose of this study is to improve the flow of information from the design and construction phase into the facility management. This in order to make the facility managers see the advantages with BIM and to show that there is money to be saved by retrieving the information from the design and the construction phase. Earlier studies show that there actually has been quite little research done within BIM in the facility management and that the main focus has been at the design and the construction phase. The aim with the study is to specify the value of the information and to show which information facility managers use and where it can be retrieved from within the earlier phases of the construction process. The report is based on a literature study, interviews and calculations. A number of facility managers have been asked which types of information they use and designers and entrepreneurs have then been asked if these types of information can be found in the design and the construction phase. The information has been valued in two different ways. In one way the information was valued by comparing the cost between updating existing information or recreate the same type of information. The other way of valuing the information was to find out the worth of information by using key figures (SEK per square meter) and the list of information that facility managers use, which was made up from the interviews. The first way of valuing shows that the cost of producing as built drawings (A) in the facility management cost as much as keeping the same type of information updated for at least 18years and as most 50years. Almost the same goes for a BIM-model. Only there the difference is that the cost of producing a BIM-model focused on as built drawings (A) in the facility management cost as much as keeping the same type of information updated for at least 22years and as most 58years. The other way that the information was valued shows that less than 25% of the information that can be found in the design and/or construction phase is worth circa 10% of the projecting fee.

There is shift in the Architectural / Engineering / Construction and Facility Management (AEC&FM) industry toward performance-driven projects. Assuring good performance requires efficient and reliable performance control processes. However, the current state of the AEC&FM industry is that control processes are inefficient because they generally rely on manually intensive, inefficient, and often inaccurate data collection techniques. Critical performance control processes include progress tracking and dimensional quality control. These particularly rely on the accurate and efficient collection of the as-built three-dimensional (3D) status of project objects. However, currently available techniques for as-built 3D data collection are extremely inefficient, and provide partial and often inaccurate information. These limitations have a negative impact on the quality of decisions made by project managers and consequently on project success. This thesis presents an innovative approach for Automated 3D Data Collection (A3dDC). This approach takes advantage of Laser Detection and Ranging (LADAR), 3D Computer-Aided-Design (CAD) modeling and registration technologies. The performance of this approach is investigated with a first set of experimental results obtained with real-life data. A second set of experiments then analyzes the feasibility of implementing, based on the developed approach, automated project performance control (APPC) applications such as automated project progress tracking and automated dimensional quality control. Finally, other applications are identified including planning for scanning and strategic scanning.

There is shift in the Architectural / Engineering / Construction and Facility Management (AEC&FM) industry toward performance-driven projects. Assuring good performance requires efficient and reliable performance control processes. However, the current state of the AEC&FM industry is that control processes are inefficient because they generally rely on manually intensive, inefficient, and often inaccurate data collection techniques. Critical performance control processes include progress tracking and dimensional quality control. These particularly rely on the accurate and efficient collection of the as-built three-dimensional (3D) status of project objects. However, currently available techniques for as-built 3D data collection are extremely inefficient, and provide partial and often inaccurate information. These limitations have a negative impact on the quality of decisions made by project managers and consequently on project success. This thesis presents an innovative approach for Automated 3D Data Collection (A3dDC). This approach takes advantage of Laser Detection and Ranging (LADAR), 3D Computer-Aided-Design (CAD) modeling and registration technologies. The performance of this approach is investigated with a first set of experimental results obtained with real-life data. A second set of experiments then analyzes the feasibility of implementing, based on the developed approach, automated project performance control (APPC) applications such as automated project progress tracking and automated dimensional quality control. Finally, other applications are identified including planning for scanning and strategic scanning.

As open access market principles are applied to power systems, significant changes are happening in their planning, operation and control. In the emerging marketplace, systems are operating under higher loading conditions as markets focus greater attention to operating costs than stability and security margins. Since operating stability is a basic requirement for any power system, there is need for newer tools to ensure stability and security margins being strictly enforced in the competitive marketplace. This dissertation investigates issues associated with incorporating voltage security into the unbundled operating environment of electricity markets. It includes addressing voltage security in the monitoring, operational and planning horizons of restructured power system. This dissertation presents a new decomposition procedure to estimate voltage security usage by transactions. The procedure follows physical law and uses an index that can be monitored knowing the state of the system. The expression derived is based on composite market coordination models that have both PoolCo and OpCo transactions, in a shared stressed transmission grid. Our procedure is able to equitably distinguish the impacts of individual transactions on voltage stability, at load buses, in a simple and fast manner. This dissertation formulates a new voltage stability constrained optimal power flow (VSCOPF) using a simple voltage security index. In modern planning, composite power system reliability analysis that encompasses both adequacy and security issues is being developed. We have illustrated the applicability of our VSCOPF into composite reliability analysis. This dissertation also delves into the various applications of voltage security index. Increasingly, FACT devices are being used in restructured markets to mitigate a variety of operational problems. Their control effects on voltage security would be demonstrated using our VSCOPF procedure. Further, this dissertation investigates the application of steady state voltage stability index to detect potential dynamic voltage collapse. Finally, this dissertation examines developments in representation, standardization, communication and exchange of power system data. Power system data is the key input to all analytical engines for system operation, monitoring and control. Data exchange and dissemination could impact voltage security evaluation and therefore needs to be critically examined.

Context. Process improvement using lean software development uses measures to answer information needs. Measures are important in process improvement as they identify whether improvements have been made or further improvements are needed. Objectives. This study aims to identify the measures proposed in literature for lean software development and structure them according to ISO/IEC 15939. Methods. The research methodology consists of systematic mapping and uses thematic analysis. Results. Lean software development literature has become more frequently published from 1996 to 2013. The most common research types were evaluation research and experience reports. Themes were identified in measures resulting in the identification of 22 base measures, 13 derived measures and 14 indicators in total. Identified measures were then structured using a proposed meta-model adapted from ISO/IEC 15939. Using the proposed meta-model twelve models of measures were instantiated. Conclusions. Gaps exist in the lean principles for deferring commitment and respecting people. Structuring measures in models presents opportunities to identify shared dependencies in measures. Lean software development research guidelines were defined. Further research into the comparison of indicators, the industrial use of measures and the representation of models of measures is needed.

Purpose: There are clear benefits with BIM in the design phase, but also barriers and challenges that limit the implementation of BIM in the design phase. At present, there are no requirements for BIM in Sweden, which differs from several international countries. The aim of the report is to examine the current use of BIM in the design phase in Sweden. The report is executed in hope of contributing to an increased BIM integration in the design phase and contribute with increased knowledge about how the development of BIM can increase. Method: The research method in this study is a survey. To achieve the aim of the report and answer the research questions, data are collected via a questionnaire that is covered by both quantitative and qualitative questionnaire questions in combination with a literature study. The questionnaire has been sent out to architects, designers and constructors at various engineering- and architectural companies in Sweden. Findings: Today's use of BIM in the design phase is assumed to be high and most of the participants in the survey are aware of the benefits of BIM and how it can make the workflow in the design phase more effective. Factors that prevent the implementation of BIM are assumed to go hand in hand with factors that contribute to an increased use of BIM and thus need to be considered for the use of BIM to increase. Implications: Sweden's low degree of digital development in the construction sector does not reflect the current use of BIM in the design phase at architectural- and engineering companies in Sweden. Common uses that architect- and engineering companies apply with BIM are collision controls, information management and visualization. By increasing knowledge and informing customers about the benefits of BIM, the use of BIM is assumed to increase. A further recommendation that assumes increased use of BIM is a requirement for BIM in public construction in Sweden. Limitations: The report is limited to examining the use of BIM in the design phase and only examines architectural- and engineering companies in Sweden. The respondents consist of architects, designers and constructors. The results are representative for the report but cannot be applied to all architectural- and engineering companies in Sweden as the selection method is not generalizable. / Syfte: Det finns tydliga fördelar med BIM i projekteringen men även hinder och utmaningar som begränsar implementering av BIM i projekteringsskedet. I Sverige finns i dagsläget inga krav på BIM vilket skiljer sig från flera internationella länder. Målet med rapporten är att undersöka dagens användning av BIM i projekteringsskedet i Sverige. Studien genomförs i förhoppning om att bidra till en ökad BIM-integrering i projekteringsskedet samt bidra med ökad kunskap om hur utvecklingen av BIM kan drivas framåt. Metod: Forskningsmetoden i denna undersökning är en survey. För att besvara rapportens frågeställningar och uppnå målet sker datainsamling via en enkät som omfattas av både kvantitativa och kvalitativa enkätfrågor i kombination med litteraturstudie. Enkäten har skickats ut till arkitekter, projektörer och konstruktörer på olika ingenjörs- och arkitektföretag runt om i Sverige. Resultat: Användningen av BIM i projekteringsskedet antas vara hög i dagsläget och majoriteten av medverkande i undersökningen känner till fördelarna med arbetssättet och hur det kan effektivisera arbetsgången i projekteringsskedet. Faktorer som hindrar implementering av BIM antas gå hand i hand med faktorer som bidrar till en ökad användning av BIM och behöver därmed beaktas för att användningen av BIM ska öka. Konsekvenser: Sveriges låga grad av digital utveckling inom byggsektorn speglar inte användandet av BIM i projekteringsskedet på arkitekt- och ingenjörsföretag i Sverige i dagsläget. Vanligt förekommande användningsområden med BIM i projekteringsskedet bland arkitekt- och ingenjörsföretag är kollisionskontroller, samgranskning, informationshantering och visualisering. Genom att öka kunskapen om BIM i beställarledet och informera om nyttan med arbetssättet antas användningen av BIM stiga. Vidare rekommendation som antas leda till en ökad användning av BIM är en kravställning på arbetssättet inom offentligt byggande i Sverige. Begränsningar: Rapporten är avgränsad till att undersöka användningen av BIM i projekteringsskedet och undersöker endast arkitekt- och ingenjörsföretag runt om i Sverige. Enkätrespondenterna utgörs av projektörer, arkitekter och konstruktörer. Resultaten är representativa för undersökningen men kan inte tillämpas på alla arkitekt och ingenjörsföretag i Sverige eftersom urvalstekniken inte är generaliserbar.

This thesis is deals with design of a Senior’s Boarding House in Lomnicka u Tisnova. Building four-storey building with one service basement floor with This thesis deals with a design of a retirement home in Lomnicka u Tisnova. This is a four storey building with one service basement floor and with a flat roof. The structural system is of a transverse wall type. Material of structural elements is a combination of reinforced concrete and masonry. The building is founded on piles. In addition, the design includes a restaurant for warming and serving food prepared in different place, laundry and a small pool. All construction drawings and schedules has been developed as building information model (BIM).

Zunehmende Vernetzung und gesteigerte Flexibilität in Planungs- und Produktionsprozessen sind die notwendigen Antworten auf die gesteigerten Anforderungen an die Industrie in Bezug auf Agilität und Einführung von Mehrwertdiensten. Dafür ist eine stärkere Digitalisierung aller Prozesse und Vernetzung mit den Informationshaushalten von Partnern notwendig. Heutige Informationssysteme sind jedoch nicht in der Lage, die Anforderungen eines solchen integrierten, verteilten Informationsraums zu erfüllen. Ein vielversprechender Kandidat ist jedoch Linked Data, das aus dem Bereich des Semantic Web stammt. Aus diesem Ansatz wurde Linked Enterprise Data entwickelt, welches die Werkzeuge und Prozesse so erweitert, dass ein für die Industrie nutzbarer und flexibler Informationsraum entsteht. Kernkonzept dabei ist, dass die Informationen aus den Spezialwerkzeugen auf eine semantische Ebene gehoben, direkt auf Datenebene verknüpft und für Abfragen sicher bereitgestellt werden. Dazu kommt die Erfüllung industrieller Anforderungen durch die Bereitstellung des Revisionierungswerkzeugs R43ples, der Integration mit OPC UA über OPCUA2LD, der Anknüpfung an industrielle Systeme (z.B. an COMOS), einer Möglichkeit zur Modelltransformation mit SPARQL sowie feingranularen Informationsabsicherung eines SPARQL-Endpunkts. / Increasing collaboration in production networks and increased flexibility in planning and production processes are responses to the increased demands on industry regarding agility and the introduction of value-added services. A solution is the digitalisation of all processes and a deeper connectivity to the information resources of partners. However, today’s information systems are not able to meet the requirements of such an integrated, distributed information space. A promising candidate is Linked Data, which comes from the Semantic Web area. Based on this approach, Linked Enterprise Data was developed, which expands the existing tools and processes. Thus, an information space can be created that is usable and flexible for the industry. The core idea is to raise information from legacy tools to a semantic level, link them directly on the data level even across organizational boundaries, and make them securely available for queries. This includes the fulfillment of industrial requirements by the provision of the revision tool R43ples, the integration with OPC UA via OPCUA2LD, the connection to industrial systems (for example to COMOS), a possibility for model transformation with SPARQL as well as fine granular information protection of a SPARQL endpoint.