Pesquisa em novas moléculas e estratégias antimicrobianas é crucial devido ao aumento de resistência a antibióticos pelos microrganismos. Polímeros antimicrobianos tem várias vantagens quando comparados a outros biocidas pequenos: maiores tempo de vida, potência, especificidade e baixa toxicidade residual. Logo, outras aplicações tecnológicas como recobrimentos, embalagens ou produtos têxteis antimicrobianos poderem ser exploradas. Em particular, derivados hidrossolúveis de quitosana, como os oligômeros de quitosana (OQ), são biopolímeros catiônicos extraídos de fontes renováveis que são candidatos promissores a serem agentes antimicrobianos de amplo espectro (fungos, bactérias gram-positivas e bactérias gram-negativas). Diferentemente da quitosana, que é sobretudo bioativa em pHs ácidos, OQ permanece catiônico – e portanto ativo – em pH fisiológico. Não obstante, o mecanismo exato pelo qual o polímero age nas membranas celulares permanece desconhecido em nível molecular. Este trabalho visa investigar o mecanismo de interação entre os OQ e modelos de membrana biomiméticos (Filmes de Langmuir). Para comparação, outro polieletrólito catiônico sintético com propriedades antibacterianas, o PAH – poli(hidrocloreto de alilamina) – foi investigado. Nós realizamos a Espectroscopia por Geração de Soma de Frequência (SFG) em Filmes de Langmuir de fosfolipídeos em água pura e em subfases contendo antimicrobianos. A Espectroscopia SFG nos permite obter o espectro vibracional de moléculas interfaciais (filme lipídico e moléculas que estão interagindo com ele: água e antimicrobianos) sem nenhuma contribuição de moléculas do interior do volume e é muito sensível às conformações lipídicas da membrana. Um fosfolipídeo zwitteriônico (DPPC) foi usado para modelar membranas tipo-humana, enquanto outro carregado negativamente (DPPG) modelava a tipo-bacteriana. Isotermas em subfases contendo antimicrobianos mostraram que ambos PAH e OQ causam uma pequena expansão das monocamadas de DPPC. Entretanto, para as monocamadas de DPPG ambos os polieletrólitos geraram uma expansão significativa. Entre eles, os OQ causaram um efeito mais drástico. Espectros SFG dos estiramentos CH mostraram que a conformação lipídica permaneceu bem empacotada em todos os casos (ligeiramente menos ordenada com PAH) apesar das expansões da membrana. Isto indica que os OQ foram inseridos formaram ilhas de OQ dentro do filme lipídico. Mudanças na forma de linha dos estiramentos da água interfacial indicaram que a adsorção de PAH em ambos os filmes foram capazes de compensar as cargas negativas, gerando uma inversão de cargas na superfície. Os espectros SFG dos grupos fosfato também indicaram que, em água pura, as cabeças polares de DPPC estão com uma orientação mais ordenada do que no caso do DPPG. Contudo, quando interagindo com os polieletrólitos catiônicos, as cabeças dos DPPGs se ordenam, ficando preferencialmente perpendicular à interface. Experimentos com antimicrobianos injetados na subfase enquanto os filmes de Langmuir já estavam condensados indicaram que os OQ foram capazes de penetrar na monocamada, embora causando uma expansão no filme menor. Esta comparação evidencia que a escolha da metodologia experimental afeta o resultado, mas ambas podem ser complementares, visto que podem representar diferentes fases do ciclo celular das biomembranas. A visão detalhada provida aqui para as interações moleculares desses polieletrólitos com filmes lipídicos podem os elucidar mecanismos de atividade biocida deles e auxiliar no planejamento racional de novos polímeros antimicrobianos. / Research on new antimicrobial molecules and strategies is crucial due to the increasing microorganism resistance to antibiotics. Antimicrobial Polymers have many advantages when compared to other small biocides: increased lifetimes, potency, specificity and lower residual toxicity. Therefore, they have great potential for technological applications, such as antimicrobial coatings, packages, or textile products. In particular, water-soluble derivatives of chitosan, such as chitosan oligomers (CO), are cationic biopolymers obtained from renewable sources that are promising candidates to a wide-spectrum antimicrobial agent (fungi, gram positive and gram negative bacteria). Unlike chitosan, which is mainly bioactive at acidic pH, CO remain cationic - and therefore active - at physiological pH. Nevertheless, the exact mechanism by which this polymer acts on the cell membranes remains unknown at the molecular level. This work aims at investigating the molecular interaction between CO and a biomimetic cell membrane model (Langmuir Film). For comparison, another synthetic cationic polylelectrolyte with antibacterial properties, PAH – poly(alylamine hydrochloride), has been investigated. We have carried out Sum-Frequency Generation (SFG) Spectroscopy on Langmuir Films of phospholipids on pure water and on antimicrobial containing subphases. SFG Spectroscopy allows obtaining the vibrational spectrum of interfacial molecules (lipid Langmuir Film and molecules interacting with it – water and antimicrobials), without any contribution from the bulk molecules, and is quite sensitive to the conformation of membrane lipids. A zwitterionic phospholipid (DPPC) was used to model human-like membranes, while a negatively charged phospholipid (DPPG) modeled bacterial-like membranes. Surface pressure-area isotherms on antimicrobial-containing subphases showed that both PAH and CO led to a small expansion of DPPC monolayers. However, for DPPG monolayers both polyelectrolytes led to significant expansion, with CO causing a more dramatic effect. SFG spectra in the CH stretch range showed that the lipid chain conformation remained always well ordered in all cases (slightly less ordered upon interacting with PAH), despite membrane expansion. This indicates that CO were inserted in the monolayer, forming islands of CO within the lipid film. Changes in the SFG spectral lineshape of OH stretches for the interfacial water molecules indicated that PAH adsorption on both DPPC and DPPG films was able to overcompensate the lipid negative charge and led to an overall surface charge reversal. The SFG spectra of the phosphate groups also indicated that in pure water the DPPC headgroups had a more ordered orientation than in the case of DPPG. Nevertheless, upon interaction with the cationic polyelectrolytes, the DPPG headgroups also become ordered, with a preferential orientation towards the subphase. Experiments with the antimicrobials injected in the subphase under a condensed Langmuir film indicated that CO were also capable of monolayer penetration, albeit causing a reduced film expansion. This comparison indicates that the choice of experimental methodology affects the outcome, but both may be complementary, as they may represent different phases of a biomembrane lifecycle. The detailed view provided here for the molecular interaction of these polyelectrolytes with lipid films may shed light on the mechanism of their biocidal activity and aid on a rational design of new antimicrobial polymers.

Foram investigadas as propriedades de formação de filmes de Langmuir e as propriedades ópticas e elétricas de filmes mistos de Langmuir-Blodgeti (LB) preparados com os polímeros HPDR13, MMA-DR13 e IPDI-DR19CI com adição de estearato de cádmio (CdSt). Para caracterizar os polímeros foram usadas as técnicas de calorimetria diferencial de varredura, espectroscopia ultravioleta-visível (W-Vis) e difração de raios X. As medidas de isotermas de pressão e de potencial de superfície com os filmes Langmuir mostraram que ocorre agregação molecular associada a interações dipolares. Medidas de absorção no W-Vis mostraram que os agregados dipolares formados são do tipo-J. As investigações dos sistemas poliméricos mostraram que o sinal da birrefringência fotoinduzida pode depender do número de camadas LB, potência da luz de excitação e temperatura. Funções com duas exponenciais e de Kohlrausch-Williams-Watts foram usadas de forma sistemática para analisar as curvas de crescimento e decaimento do sinal de birrefringência. As dependências das constantes de tempo das funções citadas também foram analisadas em função da temperatura. Observou-se que os filmes de IPDI-DR19CI/CdSt apresentam os resultados mais regulares e mais reprodutíveis para a birrefringência fotoinduzida. Isso foi atribuído a maior homogeneidade desse tipo de filme devida a menor agregação dipolar. Experimentos realizados em baixa temperatura com o polímero MMA-DRI 13 mostraram que o sinal máximo da birrefringência fotoinduzida aumenta até 120 K e diminui acima desse valor. 0s resultados abaixo de 120 K foram analisados a luz da teoria do volume livre local e dos mecanismos de fotoisomerização e difusão rotacional térmica As medidas elétricas com os filmes LB mostraram que todos os filmes poliméricos apresentam um r e m e de condução ôhmico em baixos campos elétricos e um outro regime não ôhmico atribuído a injeção de portadores no volume do material. Concluiu-se das medidas elétrica que o CdSt determina as propriedades de condução dos filmes LB mistos / The formation of Langmuir films and the optical and electrical properties of mixed Langmuir-Blodgett (LB) films were studied. Films were prepared using cadmium stearate (CdSt) and the polymers HPDR13, MMA-DR13 and IPDI-DR19CI. These polymers were characterized with differential scanning calorimetry, visible-ultraviolet spectroscopy (UVVis) and X-ray- diffraction. Surface pressure and surface potential isotherms of the Langmuir films indicated the presence of molecular aggregation due to dipolar interactions. UV-Vis spectroscopy suggested J-type aggregation of dipoles. Measurements on mixed LB film showed that the photoinduced birefringence depends on the number of LB layers, the power of excitation light and on the temper-re. A double exponential function and the Kohlrausch-Williams-Watts function were used for analyzing the experimental curves of growth and decay of the birefringence signal. The dependence of time constants of such functions on the temperature was also analyzed. Mixed LB films of IPDI-DR19CI/CdSt presented the most reproducible results of photoinduced birefringence, which was attributed to the better homogeneity of this type film probably due to the low dipolar aggregation. Experiments carried out with the polymer MMA-DRI3 at low temperatures revealed that the maximum of birefringence increases up to 120 K and then decreases for higher temperatures. Results under 120 K were analyzed using the free local volume theory and included photoisomerization and thermal rotational diffusion processes. Electrical measurements of LB films showed that all LB films present an ohmic conduction regime at low electric fields and a non-ohmic regime attributed to charge carrier injection into the film bulk. It is concluded that CdSt determines the conduction properties of mixed LB films

Neste trabalho foram estudadas as interações entre os corantes ciânicos com dois cromóforos (BCD) e monocamadas de Langmuir de fosfolipídio (DPPC). Devido ao alto coeficiente de absorção molar da luz na região ? > 600 nm, ao alto rendimento quântico do estado tripleto, à alta fotocitotoxicidade e à alta afinidade com estruturas celulares os BCD são promissores para serem utilizados em terapia fotodinâmica. Os estudos das características da interação de BCD com a monocamada são importantes tanto para esclarecer os efeitos estruturais na interação de monocamadas com outras moléculas quanto para suas aplicações em terapia fotodinâmica e em outras áreas tecnológicas tais como nanoeletrônica, fotônica etc. As isotermas de pressão superficial (?-A) obtidas mostram que os BCD e as monocamadas interagem, pois as isotermas (?-A) se expandem conforme é aumentado à porcentagem de BCD. Esta interação é dependente tanto da estrutura do BCD quanto da força iônica da subfase. A partir das isotermas (?-A) foi obtido o módulo de compressibilidade (Cs-1 = -A (??/?A) das monocamadas, do qual foram analisadas, de maneira mais detalhada, as modificações da monocamada de DPPC devido à presença dos BCD. Estas modificações compreendem o aparecimento da fase líquida expandida (LE) e formação dos domínios antecipada em comparação com a monocamada de DPPC puro. Foi observado que a área mínima por molécula e a elasticidade da monocamada na fase condensada (C) aumentam juntos com a porcentagem dos BCD. Na presença de BCD 180º as isotermas de potencial superficial (?V-A) sofrem uma expansão, no entanto, o valor máximo do potencial permanece nalterado. Isto indica que os BCD estimulam (antecipam) a orientação das moléculas de DPPC na interface ar-água e, consequentemente, a co-orientação das cabeças polares do DPPC, mas não contribuem no potencial superficial. Foi observado que a presença de NaCl na subfase aumenta o efeito dos BCD na formação da monocamada DPPC. Acreditamos que este efeito sinérgico é devido às interações mútuas dos ânions Cl- com a carga positiva do grupo trimetilamônio da cabeça polar do DPPC e das cargas positivas do BCD com a carga negativa do grupo fosfato do DPPC. As imagens obtidas pela microscopia de ângulo de Brewster mostram, em concordância com a análise das isotermas de pressão (?-A) e de potencial (?V- A), que a formação dos domínios, e conseqüentemente da monocamada, é antecipada na presença de BCD. Entretanto, a presença do BCD não altera o formato dos domínios, mas diminui seu tamanho. A análise realizada sobre os espectros de absorção óptica mostrou que os BCD podem formar agregados tipos H na monocamada e não foram observados agregados tipo J. Baseando-se na análise do efeito da estrutura dos BCD, na interação com a monocamada, e dos espectros de absorção propusemos dois modelos de interação dos BCD com a monocamada e acreditamos que o seguinte modelo é a melhor modelagem do sistema: - BCD se inseri na monocamada, paralelamente ao eixo da molécula de DPPC, interagindo tanto com a cauda hidrofóbica quanto com a cabeça polar. Entretanto, os resultados obtidos não permitem excluir completamente o segundo modelo proposto, no qual o BCD se localiza na parte polar da monocamada, perpendicular ao eixo da molécula de DPPC. / In this work the interaction of cyanine dyes with two chromophores with the DPPC phospholipid Langmuir monolayers was studied. Due to their high optical absorption in the region ? > 600 nm, high triplet state quantum yields, high photocytotoxicity and high affinity with cell structures the BCD are promising for application in photodynamic therapy. The study of the interaction of BCD with monolayers is important to clarify the structural effects on the monolayer interaction with other molecules as well as for application in photodynamic therapy and in other fields of technology, such as nanoelectronics, photonics, etc. The superficial pressure isotherms (?-A) demonstrate that BCD do interact with monolayers, the (?-A) isotherms being expanded when the BCD relative content increases. This interaction depends on the BCD structure and the subphase ionic strength, as well. The curves of the compressibility module (Cs-1 = -A (??/?A) of the monolayers were obtained from the (?-A) isotherms, which were used for detailed analysis of the DPPC monolayer formation in the BCD presence. The analysis demonstrated that the monolayer expanded liquid phase and the domain were formed earlier in the BCD presence than for pure DPPC. It was observed that both the minimum area per molecule and the condensed phase elasticity increased when the BCD relative content increased. In the presence of BCD 1800 the superficial potential isotherms (?V-A) were expanded, but the maximum potential value was unchanged. This indicates that BCD stimulated the DPPC molecule orientation on the air-water interphase and, consequently, the co-orientation of the DPPC polar heads, but did not contribute itself in the surface potential. It was observed that NaCl in the subphase increased the BCD effects on the DPPC monolayer formation. We suppose that this synergetic effect is due to the mutual interaction of Cl- anions with positive charges of the trimethylammonium group of the DPPC polar head and that of positive BCD charges with its phosphate group negative charges. Images obtained with the Brewster microscopy confirmed that BCD stimulated the domain and, consequently, the monolayer formation in accordance with the (?-A) and (?V-A) analysis. At the same time the BCD did not change the domain geometry, but reduced their sizes. The analysis of the BCD optical absorption spectra demonstrate that the BCD molecules in the monolayer form H aggregates and no J aggregates were observed. Basing on the analysis of the BCD structure effects on the monolayer formation we can propose two models of the BCD - monolayer interaction and we believe that the follow model is better: - the BCD molecule is inserted in the monolayer interior being parallel with the DPPC molecule axis and interacting with both hydrophobic and polar DPPC parts; However, our data are not sufficient to exclude completely the possibility for the BCD molecule to be localized just in the polar head monolayer part being perpendicular to the DPPC molecule axis.

Orientador: Munemasa Machida / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin / Made available in DSpace on 2018-08-19T18:26:47Z (GMT). No. of bitstreams: 1 Ronchi_Gilson_M.pdf: 6202845 bytes, checksum: e9580b7846e57a9eb526cdf45b808564 (MD5) Previous issue date: 2012 / Resumo: O conhecimento das condições para ruptura de gases e a formação de plasma são questões importantes, não apenas de interesse fundamental, mas também para muitas aplicações, tais como em deposição de filmes finos de óxido ou polímeros, limpeza de superfície de materiais ou implantação iônica, por exemplo. A ruptura de gases descrita pela lei de Paschen com a teoria de Townsend, na qual a tensão de ruptura é uma função do produto da pressão p do gás pela distância d entre os eletrodos, proporciona uma adequada descrição em certas condições, em gases sob baixa pressão, quando a distância entre os eletrodos é muito menor que o raio R dos mesmos. A medida que a razão desses valores aumenta, as curvas de Paschen são deslocadas para regiões de tensão de ruptura mais elevadas, bem como para valores pd mais elevados. Investigamos aqui, os motivos e as consequências desse fenômeno, bem como uma proposta de lei de escalas capaz de determinar a tensão de ruptura em condições distintas de descargas. Tal lei de escalas obtida empiricamente faz uso, além da pressão e distância dos eletrodos, da razão R/d, que surge naturalmente ao se considerar o processo de difusão na descarga. Discutimos ainda sobre as principais técnicas de diagnósticos aplicáveis ao plasma, para obtenção, por exemplo, das temperaturas e densidades eletrônicas/iônicas. Em particular, revisamos as técnicas de espectroscopia e sonda de Langmuir, que são técnicas importantes amplamente utilizadas / Abstract: The understanding of the gas breakdown mechanism and plasma formation are important issues not only of fundamental interests, but also for many applications such as oxide thin films or polymers deposition, surface cleaning and ion implantation, for example. The breakdown described by Paschen¿s law with Townsend¿s theory, where the breakdown voltage is a function of the product of the gas pressure p and the gap distance d, provides a very accurate description under certain conditions as in low pressure gases when the distance between the electrodes is much smaller than its radius R. As the ratio d/R increases, the Paschen curves are shifted to regions of higher breakdown voltage, as well as higher pd values. In this work we investigate the reasons and consequences of this phenomenon, as well as a scaling law capable of determining the breakdown voltage of discharges in different conditions. This scalling law, obtained empirically, uses the gas pressure, the electrodes gap distance and the ratio R/d, which arises naturally when one consider the diffusion process in the discharge. We also discuss the main diagnostic techniques applicable to plasma to obtain, for example, temperature and electronic/ionic density. In particular, we review the techniques of spectroscopy and Langmuir probe, which are important techniques widely used / Mestrado / Física / Mestre em Física

La possibilité de produire de l'énergie en utilisant la fusion par confinement magnétique est un défi scientifique et technologique. La perspective d'ITER transmet des signaux forts afin d'intensifier les efforts de modélisation pour les plasmas de fusion. Le succès de la fusion est conditionnée par la qualité du confinement du plasma dans le cœur du réacteur et par le contrôle des flux de particules et de chaleur qui arrivent sur la paroi. Les deux phénomènes sont liés au transport turbulent. L'étude de ces phénomènes est d'autant plus compliquée que la géométrie magnétique est complexe. Cela nécessite une amélioration de notre capacité à développer des outils numériques capables de reproduire les propriétés du transport turbulent fiables.Cette thèse présente le modèle fluide du code TOKAM3X pour simuler plasma de bord turbulent. Une attention particulière a été portée sur la vérification et la validation de ce code, ce qui est une étape nécessaire avant d'utiliser un code comme un outil prédictif. Ensuite, de nouvelles études sur les propriétés physiques de la turbulence bord du plasma sont examinées. En particulier, les asymétries poloïdales induites par la turbulence et observées expérimentalement côté faible champ sont étudiées en détail. Un grand soin est dédié à la reproduction du scénario MISTRAL, qui consiste à changer la configuration magnétique et à en observer l'impact sur les flux parallèles dans le plan poloïdal. Les simulations reproduisent les mesures expérimentales et fournissent de nouvelles informations sur l'effet du point de contact plasma-paroi sur les caractéristiques de la turbulence, qui ne sont pas accessibles dans les expériences. / The possibility to produce power by using magnetically confined fusion is a scientific and technological challenge. The perspective of ITER conveys strong signals to intensify modeling effort on magnetized fusion plasmas. The success of the fusion operation is conditioned by the quality of plasma confinement in the core of the reactor and by the control of plasma exhaust on the wall. Both phenomena are related to turbulent cross-field transport that is at the heart of the notion of magnetic confinement studies, particle and heat losses. The study of edge phenomena is therefore complicated by a particularly complex magnetic geometry.This calls for an improvement of our capacity to develop numerical tools able to reproduce turbulent transport properties reliable to predict particle and energy fluxes on the plasma facing components. This thesis introduces the TOKAM3X fluid model to simulate edge plasma turbulence. A special focus is made on the code Verification and the Validation. It is a necessary step before using a code as a predictive tool. Then new insights on physical properties of the edge plasma turbulence are explored. In particular, the poloidal asymmetries induced by turbulence and observed experimentally in the Low-Field-Side of the devices are investigated in details. Great care is dedicated to the reproduction of the MISTRAL base case which consists in changing the magnetic configuration and observing the impact on parallel flows in the poloidal plane. The simulations recover experimental measurements and provide new insights on the effect of the plasma-wall contact position location on the turbulent features, which were not accessible in experiments.

Les cristaux photoniques (CP) 3D sont des matériaux périodiques dont l’indice de réfraction varie périodiquement à l’échelle de la longueur d’onde. Cette propriété optique permet d’élaborer des composants optiques spécifiques comme des miroirs pour les lasers de puissance. Ces structures doivent présenter une meilleure tenue au flux laser (TFL) en régime sub-nanoseconde, comparés aux revêtements miroirs multidiélectriques actuels. Cette propriété est attendue car un unique matériau présentant une bonne TFL est utilisé pour leur élaboration, la silice. Cette étude présente donc le développement de cristaux photoniques colloïdaux 3D en utilisant la technique de Langmuir-Blodgett. Ces CP sont constitués de particules de silice avec une distribution en taille étroite, synthétisées par voie sol-gel. Différentes synthèses ont donc été développées et comparées afin d’obtenir les meilleures propriétés réfléchissantes. Une modélisation a aussi été effectuée en incluant des défauts dans une structure parfaite pour just ifier certains résultats expérimentaux. / Three-dimensional photonic crystals (PCs) are periodic materials with a modulated refractive index on a length scale close to the light wavelength. This optical property allows the preparation of specific optical components like highly reflective mirrors. Moreover, these structured materials might have a high laser-induced damage threshold (LIDT) in the sub-nanosecond range compared to multi-layered dielectric mirrors. This property is obtained because only one high LIDT material (silica) is used. In this work, we present the development of 3D PCs with narrow-sized colloidal silica particles, prepared by sol-gel process and deposited with Langmuir- Blodgett technique. Different syntheses routes have been investigated and compared regarding the optical properties of the PCs. A numerical model based on an ideal opal network including defect influence is used to explain these experimental results.

No description available.

Les cellules solaires polymériques attirent un grand intérêt dans ce domaine de recherche, en raison du faible coût, du procédé de fabrication de grandes surfaces, des matériaux de manutention légers et de la possibilité de leur fabrication par diverses techniques. Pour une bonne efficacité des dispositifs photovoltaïques, la couche active doit contenir une bonne absorption de la lumière du soleil. En termes de bandgap,cela signifie que plus le bandgap est petit, plus le flux de photons absorbés est grand. Une manière d'accomplir ceci avec les matériaux polymères est la synthèse d'un copolymère alterné dans lequel le bandgap optique est diminué, ce que l'on appelle des polymères low-bandgap. L'organisation joue un rôle important dans la performance des dispositifs, y compris les dispositifs photovoltaïques, et la technique Langmuir-Schaefer (LS) permet de fabriquer des films nanostructurés avec contrôle de l'épaisseur, qui peuvent servir de base pour construire de meilleurs dispositifs. Dans ce contexte, l'objectif de ce travail était de synthétiser des polymères low-bandgap et ensuite de fabriquer et caractériser des films LS de ces polymères et leurs mélanges avec un dérivé de fullerène, le PCBM, pour leur application en tant que couche active de cellules solaires. Les films LS des polymères et leurs mélanges avec PCBM ont été fabriqués et des mesures de caractérisation ont été effectuées. Ces films ont été caractérisés par des mesures électriques (courant vs tension, spectroscopie d'impédance et voltampérométrie cyclique), morphologiques (microscopie à force atomique) et optiques (UV-visible, diffusion Raman et transmission infrarouge). Par les films de Langmuir et les mesures morphologiques, il a été possible d'observer les caractéristiques spécifiques concernant la conformation de chaque polymère sous forme de film. Des mesures optiques confirment l'absorption aux longueurs d'onde élevées attendues pour ces polymères. Dans les mesures électriques, les résultats ont montré des conductivités différentes pour les mêmes matériaux lorsque les types d'électrodes ont été changés. Les dispositifs photovoltaïques des films LS fabriqués n'ont pas atteint de bonnes valeurs d'efficacité. Les films spin-coating de ces polymères testés en tant que couche active des dispositifs, sous atmosphère contrôlée, ont montré unefficacité allant jusqu'à 0,6%. / Polymeric solar cells attract great interest in this area of research due to the potential low cost, large area fabrication process, light weight physical feature and the possibility of fabricating these cells by several techniques. To achieve good efficiency in the photovoltaic devices the active layer must have an efficient absorption of sunlight. In terms of bandgap, this means that the smaller the bandgap the greater the flux of photons absorbed. One way to accomplish this, with the polymeric materials, is the synthesis of a polymer in which the optical bandgap has the ability to increase the capture of sunlight, the so-called low-bandgap polymers. The organization plays an important role in the performance of devices, including in photovoltaic devices, and the Langmuir-Schaefer (LS) technique provides the ability to manufacture nanostructured films with thickness control, which can serve as a basis for building better devices. In this context, the aim of this work was to synthesize low-bandgap polymers for later manufacturing and characterization of LS films of these polymers and their blends with a fullerene derivative, PCBM, and test them as active layer of solar cells. LS films of such polymers and their blends with PCBM were made and characterization measurements were performed. These films were characterized by electrical (current vs. voltage, impedance spectroscopy and cyclic voltammetry), morphology (atomic force microscopy) and optical (ultraviolet-visible, Raman scattering and infrared) measurements. Through the Langmuir films and the morphological measurements, it was possible to observe the specific characteristics of how it is the conformation of each polymer in film form. Optical measurements confirmed the absorption at high wavelengths expected for these polymers. In the electrical measurements the results showed different conductivities for the same materials when the types of electrodes were changed. The photovoltaic devices manufactured from LS technique have not reached good efficiency values. When spin-coated active layers were teste as OPV devices in a controlled atmosphere the efficiency achieved up to 0.6%. / Células solares poliméricas atraem grande interesse nessa área de pesquisa, devido ao baixo custo, processo de fabricação de grandes áreas, materiais de manuseio leves e a possibilidade de sua fabricação por diversas técnicas. Para uma boa eficiência dos dispositivos fotovoltaicos, a camada ativa deve conter uma boa absorção da luz solar. Em termos de bandgap, isto quer dizer que quanto menor o bandgap maior o fluxo de fótons absorvidos. Uma maneira de realizar isto com os materiais poliméricos é a síntese de um polímero no qual o bandgap óptico tem a capacidade de aumentar a captura da luz solar, os chamados polímeros low-bandgap. A organização possui um papel importante na performance de dispositivos, inclusive dos fotovoltaicos, e a técnica Langmuir-Schaefer (LS) proporciona a capacidade de fabricar filmes nanoestruturados e com controle de espessura, podendoservir de base para construção de melhores dispositivos. Dentro deste contexto, o objetivo deste trabalho foi sintetizar polímeros low-bandgap e, posteriormente fabricar e caracterizar filmes LS destes polímeros e de suas blendas com um derivado de fulereno, o PCBM, para a aplicação dos mesmos como camada ativa de células solares. Foram fabricados filmes LS dos polímeros e de suas misturas com PCBM e realizadas medidas de caracterização. Estes filmes foram caracterizados por meio de medidas elétricas (corrente vs. Tensão, espectroscopia de impedância e voltametria cíclica), morfológica (microscopia de força atômica) e óptica (Ultravioleta-Visível, Espalhamento Raman e transmissão no infravermelho). Com os filmes de Langmuir e as medidas morfológicas foi possível observar as características específicas de como é a conformação de cada polímero na forma de filme. As medidas ópticas confirmam a absorção em altos comprimentos de onda esperados para estes polímeros. Nas medidas elétricas os resultados mostraram diferentes condutividades para os mesmos materiais quando mudado os tipos de eletrodos. Os dispositivos fotovoltaicos dos filmes LS fabricados não alcançaram bons valores de eficiência. Filmes spin-coating destes polímeros testados como camada ativa dos dispositivos, em atmosfera controlada, revelaram eficiência de até 0.6%.

Les liquides ioniques et le graphène sont intensivement étudiés, respectivement en tant qu’électrolyte et électrode, pour le développement des supercondensateurs. Dans ce cadre, il est primordial de caractériser l’interface entre les deux espèces. Pour ce faire, nous avons réalisé ce type d’interface par la procédure des films de Langmuir que nous avons observés à différentes échelles via des mesures d’isothermes, de microscopies à angle de Brewster et à force atomique ainsi que par diffusion des rayons X de surface. Nous avons étudié des films formés par des liquides ioniques, de l’oxyde de graphène et enfin d’un mélange de ces deux espèces. L’étude sur les liquides ioniques purs montre que le cation joue un rôle non négligeable sur l’organisation des films à l’interface air-eau, aussi bien en monocouche que lors du passage en phase tridimensionnelle. Par ailleurs, nous avons montré que les films d’oxyde de graphène forment spontanément une bicouche de feuillets à l’interface eau-air même pour de faibles densités superficielles. Enfin concernant les films mixtes, nous avons observé une ségrégation verticale des espèces quand la pression de surface devient suffisamment élevée. Le film est alors composé d’une première couche en contact avec l'eau, majoritairement composée de feuillets d’oxyde de graphène parallèles à l’interface, sur laquelle se superpose une seconde couche formée des domaines de liquide ionique désorganisé. / Graphene and ionic liquids are intensively studied, respectively as electrolyte and as electrode materials, for the development of supercapacitors. In this framework, the characterization between the two species is essential. We realized such kind of interfaces through the Langmuir film procedure and characterized them at different scales, using isotherm measurements, Brewster Angle and Atomic Force Microscopies, and surface X-ray scattering. We studied films formed by different ionic liquids, by graphene oxide and finally by a mixture of the two species. The study on the pure ionic liquids evidences the role of the cation on the film organization at the air-water interface, for the monolayer as well as for the tridimensional phase. Moreover, we showed that the graphene oxide films are composed of a bilayer of sheets à the interface, even at low surface densities. Finally, regarding the mixed film, we observed a vertical segregation of the species for high enough surface pressures. The film is formed by a first layer in contact with the water surface, mostly composed of graphene oxide sheets parallel to the interface, on which a second layer is superimposed, composed of disorganized ionic liquid domains.

L'objectif général du travail de recherche était l'amélioration de la compréhension de la réaction de dégradation photocatalytique de l’acide salicylique choisi comme polluant modèle. Un réacteur ouvert ayant un canal parallélépipédique, de largeur et de profondeur de l'ordre du millimètre, imprégné de catalyseur TiO₂ , a permis de caractériser la dégradation de l’acide salicylique en fonction des dimensions du canal, du débit, de la concentration en polluant et de l’intensité d'irradiation UV. La fraction dégradée d’acide salicylique diminue avec le débit, la concentration d’entrée et augmente avec l’intensité d’irradiation UV. Pour un temps de passage donné, la réduction de la profondeur et la largeur du microcanal, améliore l’efficacité de la dégradation. En effet, d'une manière générale, la vitesse de la réaction de dégradation est proportionnelle à la surface catalytique sur le volume réactionnel. Le rapport de la surface imprégnée sur le volume du microcanal est augmenté par la miniaturisation du canal ce qui entraine une meilleure dégradation. Un modèle basé sur le modèle de Langmuir-Hinshelwood et tenant compte du transfert de matière permet de rendre compte des résultats expérimentaux. Ce modèle met en évidence que la limitation de la réaction de dégradation par le transfert de matière est plus importante aux plus faibles débits (< 10 ml/h) et quand le canal devient plus profond. La simulation prédit des taux de conversion de l’ordre de 90 %, soit en agissant sur la géométrie (réacteur multicanaux, longueur totale des canaux de l’ordre du mètre), soit sur le procédé (réacteur à recyclage fermé) / The overall objective of the research work was to improve the understanding of the photocatalytic reaction of salicylic acid degradation chosen as model pollutant. An open reactor having a parallelepiped channel, of width and depth near millimetre size, coated with TiO₂ catalyst, was used to characterize the salicylic acid degradation in function of channel dimensions, flow rates, inlet pollutant concentrations and UV irradiation intensities. The degraded fraction of salicylic acid decreases with the flow rate, inlet concentration while it increases with UV irradiation intensity. For a given residence time, the reduction of the microchannel depth and width improve the degradation efficiency. Indeed, the reaction rate of degradation generally increases with the ratio of catalyst area on reaction volume. The ratio of coated area on microchannel volume is increased by miniaturization of the channel which leads to a larger degradation. A model based on the Langmuir-Hinshelwood approach which takes into account the mass-transfer account very well for the experimental results. This model highlights that reaction limitation by mass-transfer is larger at the lowest flows (< 10 mL/h) and when the channel becomes deeper. The simulation allows us to predict that conversion ratio of about 90%, can be reach by both acting on the geometry (multichannel reactor, total length of channels of the order of meter) or on the process (batch recirculation reactor)