No description available.

At this time the synthesis of reversible circuits for quantum computing is an active area of research. In the most restrictive quantum computing models there are no ancilla lines and the quantum cost, or latency, of performing a reversible form of the AND gate, or Toffoli gate, increases exponentially with the number of input variables. In contrast, the quantum cost of performing any combination of reversible EXOR gates, or CNOT gates, on n input variables requires at most O(n2/log2n) gates. It was under these conditions that EXOR-AND-EXOR, or EPOE, synthesis was developed. In this work, the GF(2) logic theory used in EPOE is expanded and the concept of an EXOR-AND product transform is introduced. Because of the generality of this logic theory, it is adapted to EXOR-AND-OR, or SPOE, synthesis. Three heuristic spectral logic synthesis algorithms are introduced, implemented in a program called XAX, and compared with previous work in classical logic circuits of up to 26 inputs. Three linear reversible circuit methods are also introduced and compared with previous work in linear reversible logic circuits of up to 100 inputs.

University of Macau / Faculty of Science and Technology / Department of Electrical and Electronics Engineering

This dissertation focuses on wideband circuit design and implementation issues up to 10GHz based on the direct conversion architecture in the CMOS and SiGe BiCMOS technologies. The dissertation consists of two parts: One, implementation of a RF front-end receiver for an ultra-wideband system and, two, implementation of a local oscillation (LO) signal for a GSM/WCDMA multiband application. For emerging ultra-wideband (UWB) applications, the key active components in the RF front-end receiver were designed and implemented in 0.18um SiGe BiCMOS process. The design of LNA, which is the critical circuit block for both systems, was analyzed in terms of noise, linearity and group delay variation over an extemely wide bandwidth. Measurements are demonstrated for an energy-thrifty UWB receiver based on an MB-OFDM system covering the full FCC-allowed UWB frequency range. For multiband applications such as a GSM/WCDMA dual-band application, the design of wideband VCO and various frequency generation blocks are investigated as alternatives for implementation of direct conversion architecture. In order to reduce DC-offset and LO pulling phenomena that degrade performance in a typical direct conversion scheme, an innovative fractional LO signal generator was implemented in a standard CMOS process. A simple analysis is provided for the loop dynamics and operating range of the design as well as for the measured results of the factional LO signal generator.

Large-scale reconfigurable and programmable analog devices provide a new option for prototyping and synthesizing analog circuits for analog signal processing and beyond. Field-programmable analog arrays (FPAAs) built upon floating gate transistor technologies provide the analog reconfigurability and programmability density required for large-scale devices on a single integrated circuit (IC). A wide variety of synthesized circuits, such as OTA followers, band-pass filters, and capacitively coupled summation/difference circuits, were measured to demonstrate the flexibility of FPAAs. Three generations of devices were designed and tested to verify the viability of such floating gate based large-scale FPAAs. Various architectures and circuit topologies were also designed and tested to explore the trade-offs present in reconfigurable analog systems. In addition, large-scale FPAAs have been incorporated into class laboratory exercises, which provide students with a much broader range of circuit and IC design experiences than have been previously possible. By combining reconfigurable analog technologies with an equivalent large-scale digital device, such as a field-programmable gate array (FPGA), an extremely powerful and flexible mixed signal development system can be produced that will enable all of the benefits possible through cooperative analog/digital signal processing (CADSP).

This work is concerned with the implementation and implication of non-volatile charge storage on VLSI system design. To that end, the floating-gate pFET (fg-pFET) is considered in the context of large-scale arrays. The programming of the element in an efficient and predictable way is essential to the implementation of these systems, and is thus explored. The overhead of the control circuitry for the fg-pFET, a key scalability issue, is examined. A light-weight, trend-accurate model is absolutely necessary for VLSI system design and simulation, and is also provided. Finally, several reconfigurable and reprogrammable systems that were built are discussed.

Thesis (M.S.)--Mississippi State University. Department of Electrical and Computer Engineering. / Title from title screen. Includes bibliographical references.

With the probable end of Moore's Law in the near future, and with advances in nanotechnology, new forms of computing are likely to become available. Reversible computing is one of these possible future technologies, and it employs reversible circuits. Reversible circuits in a classical form have the potential for lower power consumption than existing technology, and in a quantum form permit new types of encryption and computation. One fundamental challenge in synthesizing the most general type of reversible circuit is that the storage space for fully specifying input-output descriptions becomes exponentially large as the number of inputs increases linearly. Certain restricted classes of reversible circuits, namely affine-linear, linear, and permutation circuits, have much more compact representations. The synthesis methods which operate on these restricted classes of reversible circuits are capable of synthesizing circuits with hundreds of inputs. In this thesis new types of synthesis methods are introduced for affine-linear, linear, and permutation circuits, as well as a synthesizable HDL design for a scalable, systolic processor for linear reversible circuit synthesis.

University of Macau / Faculty of Science and Technology / Department of Electrical and Electronics Engineering

Radio Frequency Low Noise and High Q Integrated Filters in Digital CMOS Processes Zhijie Xiong 149 pages Directed by Dr. Phillip E. Allen Presented in this work is a novel design technique for CMOS integration of RF high Q integrated filters using positive feedback and current mode approach. Two circuits are designed in this work: a 100MHz low-noise and high Q bandpass filter suited for an FM radio front-end, and a 2.4GHz low-noise and high-Q bandpass filter suited for a Bluetooth front-end. Current-mode approach and positive feedback design techniques are successfully used in the design of both circuits. Both circuits are fabricated through a 0.18um CMOS process provided by National Semiconductor Corp. The 100MHz circuit achieves 3.15uV RF sensitivity with 26dB SNR, and the total current consumption is 12mA. The center frequency of the filter is tunable from 80MHz to 110MHz, and the Q value is tunable from 0.5 to 28.9. 1 dB compression point is measured as -34.0dBm, combined with noise measurement results, a dynamic range of 54.1 dB results. Silicon area of the core circuit is 0.4 square millimeters. The center frequency of the 2.4GHz circuit is tunable from 2.4GHz to 2.5GHz, and the Q value is tunable from 20 to 120. The 1 dB compression dynamic range of the circuit is 50dB. Integrated spiral inductors are developed for this design. Patterned ground shields are laid out to reduce inductor loss through substrate, especially eddy current loss when the circuit is fabricated on epi wafers. Accumulation mode MOS varactors are designed to tune the frequency response. Silicon area of the core circuit is 1 square millimeter.