Analisam-se problemas de interação solo-estrutura através de uma formulação tridimensional obtida da combinação entre o Método dos Elementos de Contorno (MEC) e o Método dos Elementos Finitos (MEF). Os elementos estruturais que interagem com o solo são modelados pelo Método dos Elementos Finitos. E o solo, considerado como um meio semi-infinito, homogêneo, elástico linear e isotrópico, é modelado pelo Método dos Elementos de Contorno, empregando a solução fundamental de Mindlin. A solução fundamental de Mindlin é particularmente adequada para o tipo de problemas em análise, ou seja, problemas envolvendo sólidos tridimensionais semi-infinitos, já que é necessário discretizar apenas a superfície carregada do solo e/ou a linha de carga, e não todo o sólido tridimensional. A discretização da estaca em vários elementos finitos de viga tridimensional, permitindo a consideração de estacas de qualquer tamanho e submetidas a qualquer tipo de carregamento é uma das principais contribuições do trabalho. Outra contribuição diz respeito à consideração da ação horizontal no sistema placa-estaca-solo, diretamente aplicada na placa, e não redistribuída no topo das estacas. Por isso, os elementos estruturais laminares (radiers, sapatas e blocos de fundação) são modelados por elementos finitos de casca plana, possibilitando a consideração dos efeitos de flexão e de membrana. Essa abordagem permite a análise tanto de um grupo de estacas com bloco de capeamento rígido quanto de um radier estaqueado de qualquer rigidez. O acoplamento entre o MEC e o MEF é feito através de uma formulação mista em que a matriz dos coeficientes de influência do solo obtida pelo MEC é adicionada à matriz de rigidez dos elementos estruturais obtida pelo MEF, resultando em uma matriz de rigidez equivalente. Exemplos numéricos de interação estaca-solo, placa-solo e casca plana-estaca-solo são resolvidos para verificar, validar e demonstrar a eficiência das formulações desenvolvidas e implementadas. / Soil-structure interaction problems are analyzed by a tridimensional formulation obtained combining the Boundary Element Method (BEM) and the Finite Element Method (FEM). Structural elements that interact with the soil are modeled by the Finite Element Method. And the soil, considered as a semi-infinite, homogeneous, linear elastic and isotropic medium, is modeled by the Boundary Element Method, using Mindlin\'s fundamental solution. Mindlin\'s fundamental solution is particularly suitable for the type of problems under analysis, viz. problems involving semi-infinite three-dimensional solids, since it is necessary to discretize only the loaded surface of the soil and/or the line-load, and not all the three-dimensional solid. The discretization of the pile in several three-dimensional beam finite elements, allowing the consideration of piles of any size and subjected to any type of loading, is one of the main contributions of this work. Another contribution is about the consideration of the horizontal load in the plate-pile-soil system, directly applied to the plate, and not redistributed on the top of the piles. Therefore, the laminar structural elements (rafts, footings, and foundation blocks) are modeled by flat shell finite elements, making possible the consideration of the effects of flexion and membrane. This approach allows the analysis of both a capped pile group and a piled raft of any stiffness. The coupling between the BEM and the FEM is performed through a mixed formulation in which the matrix of the soil\'s influence coefficients obtained by the BEM is added to the stiffness matrix of the structural elements obtained by the FEM, resulting in an equivalent stiffness matrix. Numerical examples of pile-soil, plate-soil and flat shell-pile-soil interaction are solved to verify, validate and demonstrate the efficiency of the developed and implemented formulations.

Methicillin-resistant Staphylococcus aureus (MRSA) is an important human pathogen that is endemic in hospitals all over the world. It has more recently emerged as a serious threat to the general public in the form of community-acquired MRSA. MRSA has been implicated in a wide variety of diseases, ranging from skin infections and food poisoning to more severe and potentially fatal conditions, including; endocarditis, septicaemia and necrotising pneumonia. Treatment of MRSA disease is complicated and can be unsuccessful due to the bacterium's remarkable ability to develop antibiotic resistance. The considerable economic and public health burden imposed by MRSA has fuelled attempts by researchers to understand the evolution of virulent and antibiotic resistant strains and thereby improve epidemiological management strategies. Central to MRSA transmission management strategies is the implementation of active surveillance programs, via which unique genetic fingerprints, or genotypes, of each strain can be identified. Despite numerous advances in MRSA genotyping methodology, there remains a need for a rapid, reproducible, cost-effective method that is capable of producing a high level of genotype discrimination, whilst being suitable for high throughput use. Consequently, the fundamental aim of this thesis was to develop a novel MRSA genotyping strategy incorporating these benefits. This thesis explored the possibility that the development of more efficient genotyping strategies could be achieved through careful identification, and then simple interrogation, of multiple, unlinked DNA loci that exhibit progressively increasing mutation rates. The baseline component of the MRSA genotyping strategy described in this thesis is the allele-specific real-time PCR interrogation of slowly evolving core single nucleotide polymorphisms (SNPs). The genotyping SNP set was identified previously from the Multi-locus sequence typing (MLST) sequence database using an in-house software package named Minimum SNPs. As discussed in Chapter Three, the genotyping utility of the SNP set was validated on 107 diverse Australian MRSA isolates, which were largely clustered into groups of related strains as defined by MLST. To increase the resolution of the SNP genotyping method, a selection of binary virulence genes and antimicrobial resistance plasmids were tested that were successful at sub typing the SNP groups. A comprehensive MRSA genotyping strategy requires characterisation of the clonal background as well as interrogation of the hypervariable Staphylococcal Cassette Chromosome mec (SCCmec) that carries the β-lactam resistance gene, mecA. SCCmec genotyping defines the MRSA lineages; however, current SCCmec genotyping methods have struggled to handle the increasing number of SCCmec elements resulting from a recent explosion of comparative genomic analyses. Chapter Four of this thesis collates the known SCCmec binary marker diversity and demonstrates the ability of Minimum SNPs to identify systematically a minimal set of binary markers capable of generating maximum genotyping resolution. A number of binary targets were identified that indeed permit high resolution genotyping of the SCCmec element. Furthermore, the SCCmec genotyping targets are amenable for combinatorial use with the MLST genotyping SNPs and therefore are suitable as the second component of the MRSA genotyping strategy. To increase genotyping resolution of the slowly evolving MLST SNPs and the SCCmec binary markers, the analysis of a hypervariable repeat region was required. Sequence analysis of the Staphylococcal protein A (spa) repeat region has been conducted frequently with great success. Chapter Five describes the characterisation of the tandem repeats in the spa gene using real-time PCR and high resolution melting (HRM) analysis. Since the melting rate and precise point of dissociation of double stranded DNA is dependent on the size and sequence of the PCR amplicon, the HRM method was used successfully to identify 20 of 22 spa sequence types, without the need for DNA sequencing. The accumulation of comparative genomic information has allowed the systematic identification of key MRSA genomic polymorphisms to genotype MRSA efficiently. If implemented in its entirety, the strategy described in this thesis would produce efficient and deep-rooted genotypes. For example, an unknown MRSA isolate would be positioned within the MLST defined population structure, categorised based on its SCCmec lineage, then subtyped based on the polymorphic spa repeat region. Overall, by combining the genotyping methods described here, an integrated and novel MRSA genotyping strategy results that is efficacious for both long and short term investigations. Furthermore, an additional benefit is that each component can be performed easily and cost-effectively on a standard real-time PCR platform.

Made available in DSpace on 2014-12-17T14:06:58Z (GMT). No. of bitstreams: 1 JaqueligiaBS_Capa_ate_referencias.pdf: 4148676 bytes, checksum: c08764d974461ebcf86494a06a296078 (MD5) Previous issue date: 2008-10-08 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ?C, 950 ?C and 1050 ?C, the heating rate of 5 ?C / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ?C and 950 ?C, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated / Na constru??o civil, durante o processo de execu??o de grandes ou at? mesmo pequenas obras, h? um desperd?cio consider?vel de gesso nas etapas de revestimento, tornando-se este um fator negativo, pois parte das perdas destes processos construtivos permanece incorporada nas constru??es, na forma de componentes, cujas dimens?es finais s?o superiores ?quelas projetadas. Outro fator negativo ? a disposi??o dos res?duos de gesso em locais inadequados, contribuindo assim para a degrada??o da qualidade ambiental, devido ao processo de lixivia??o deste res?duo, podendo desencadear na forma??o de ?cido sulf?rico. Baseado neste panorama, a transforma??o e o reaproveitamento dos res?duos de revestimento, aliada ? ind?stria da cer?mica, que ? um forte potencial no reaproveitamento de alguns tipos de res?duos, promoveria benef?cios m?tuos. O objetivo geral deste trabalho foi de realizar uma pesquisa com aspectos cient?ficos e tecnol?gicos, para verificar o efeito da incorpora??o do res?duo de gesso para revestimento, proveniente da constru??o civil, na formula??o de massas para cer?mica vermelha. As mat?rias-primas foram coletadas de dois p?los cer?micos do Estado do Rio Grande do Norte e formuladas com o intuito de obter aquelas com as melhores propriedades f?sicas e mec?nica, tendo sido incorporados os percentuais 5%, 10%, 15%, 20%, 25% e 30% de res?duo, na melhor formula??o da ind?stria cer?mica 1 e, de acordo com a an?lise dos seus resultados, de 5%, 10% e 15% na melhor formula??o da ind?stria cer?mica 2. As amostras foram sinterizadas ?s temperaturas de 850 ?C, 950 ?C e 1050 ?C, ? taxa de aquecimento de 5 ?C/min com isoterma de duas horas e submetidas a ensaios tecnol?gicos, como retra??o linear de queima, absor??o de ?gua, porosidade aparente, massa espec?fica aparente e resist?ncia mec?nica ? flex?o. Os melhores resultados de incorpora??o do res?duo nas formula??es de massa de cer?mica vermelha foram observados na faixa de temperatura de 850 ?C a 950 ?C, naquelas que possuem argilas il?ticas e medianamente pl?sticas em sua composi??o, na faixa de 0% a 15% de res?duo incorporado

Made available in DSpace on 2014-12-17T14:07:01Z (GMT). No. of bitstreams: 1 HarrisonAD.pdf: 3488100 bytes, checksum: 805801db06d21e5667735d16a5799fe2 (MD5) Previous issue date: 2008-05-30 / The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles / Ligas cobalto-cromo s?o extensivamente utilizadas na Odontologia para a confec??o de arma??es met?licas em pr?teses parciais remov?veis. Durante os ?ltimos anos, tem sido reportado um n?mero crescente de falhas prematuras, com poucos meses de utiliza??o das pr?teses. A fabrica??o desses componentes ? feita em laborat?rios prot?ticos e normalmente envolve a refundi??o, utilizando partes de liga fundida e partes de liga virgem. Portanto, o objetivo do presente estudo foi analisar as propriedades mec?nicas de uma liga comercial de cobalto-cromo de uso odontol?gico ap?s sucessivas refundi??es, buscando informa??es no sentido de orientar os laborat?rios de pr?tese dent?ria na correta manipula??o dessa liga no processo de fundi??o e nos poss?veis limites de refundi??o desse material. Foram confeccionados sete grupos de amostras, cada um contendo cinco corpos de prova, divididos da seguinte maneira: G1: fundi??o apenas com liga virgem; G2: fundi??o com 50% da liga do G1 + 50% de liga virgem; G3: fundi??o com 50% da liga do G2 + 50% de liga virgem; G4: fundi??o com 50% da liga do G3 + 50% de liga virgem; G5: 50% de liga do G4 + 50% de liga virgem; G6: 50% de liga do G5 + 50% de liga virgem e finalmente o G7, s? com liga refundida. Foram avaliadas as principais modifica??es ocorridas no comportamento mec?nico dessa liga por meio de ensaios de tra??o e microdureza. Al?m disso, foi realizada a caracteriza??o microestrutural do material por meio de microscopia ?ptica e eletr?nica de varredura, difra??o e fluoresc?ncia de raios X procurando correlacionar as altera??es mec?nicas com modifica??es estruturais do material ocasionadas pelos sucessivos processos de refundi??o. De forma geral os resultados mostraram altera??es na plasticidade e energia de fratura da liga ap?s sucessivas refundi??es, decorrentes principalmente da crescente presen?a de poros e vazios, defeitos caracter?sticos da fundi??o do material. A interpreta??o dos resultados permitiu concluir que o material n?o apresentou diferen?as significativas em rela??o ? resist?ncia ? tra??o ou ao limite el?stico, em fun??o das sucessivas refundi??es. A energia de fratura do material mostrou tend?ncia ? diminui??o, ? medida que o material foi refundido. Em rela??o ? microdureza, as an?lises estat?sticas mostraram n?o haver diferen?as significativas. A microscopia eletr?nica revelou a presen?a de falhas e defeitos, resultantes dos processos de refundi??es. A an?lise por fluoresc?ncia e difra??o de raios X n?o mostrou altera??es na composi??o da liga ou na forma??o de fases cristalinas entre os grupos analisados. As micrografias ?pticas mostraram um crescente n?mero de vazios e aumento da porosidade ? medida que o material foi refundido. Assim, a conclus?o geral do trabalho ? que as sucessivas refundi??es em ligas de Co-Cr comprometem as propriedades mec?nicas do material, o que pode levar a falhas e consequentemente, ao fracasso do trabalho prot?tico. Com base nos resultados, o mais recomendado ? a utiliza??o de no m?ximo duas refundi??es, para que as propriedades do material n?o sejam comprometidas

Made available in DSpace on 2014-12-17T14:07:23Z (GMT). No. of bitstreams: 1 GilsonSN.pdf: 6365807 bytes, checksum: a479a13345717293c658748ef49aab97 (MD5) Previous issue date: 2007-07-04 / The state of Rio Grande do Norte presents a great potentiality for the production of ceramic tiles because of having natural raw material in quantity and quality making its economical exploration possible, beyond the great energetic differential of the state, the natural g?s. This works aims to study the influence of the dolomite and granulometry concentration and calcinations temperature in the obtaining of formulations for porous coverings which have to be coherent to the project,s specifications. The experiments have involved the physical-chemical and mineralogical characterizations of raw materials and mechanical tests in the dry and burnt proof bodies preceding a mixture experiment planning with the use of the response surface methodology, in order to get the best raw materials combinations to produce a ceramic mass with specific properties. The twelve ceramic masses studied in this work were prepared by the via dry process, characterized, shaped by uniaxial pressing and sinterized in the temperatures of 940?C, 1000?C, 1060?C, 1120?C and 1180?C, using a fast burning cycle. The crystalline phases formed during the sintering in the temperatures in study have revealed the presence of anorthite and diopside beyond quartz with a remaining phase. These phases were the main responsible ones by the physical- mechanical properties of the sinterized proof bodies. The proof bodies after the sintering stage have presented water absorption higher than 10% and a good dimensional stability in all studied temperatures. However, the flexural breaking strength results in the temperatures of 940?C, 1000?C and 1060?C, under the temperature zone of the vitrification of ceramic whiteware do not reach the flexural breaking strength specific for the porous wall tile (15 MPa), but in the temperature of 1120?C next to the vitrification temperature zone, some whiteware ceramic (formulations) has reached the specified value for the porous wall tile. The results of this work have showed that the studied raw materials have great importance for used in the production of porous wall tiles (BIII) / Rio Grande do Norte apresenta uma grande potencialidade para produ??o de revestimento cer?mico, haja vista, possuir mat?rias-primas naturais em quantidade e qualidade possibilitando sua explora??o econ?mica, al?m do grande diferencial energ?tico do Estado, que ? o g?s natural. Este trabalho objetiva estudar a influ?ncia da concentra??o de dolomita, sua granulometria e temperatura de sinteriza??o na obten??o de formula??es para revestimento poroso que atendam as especif?ca??es do projeto. Os experimentos envolveram a caracteriza??o f?sico qu?mico e mineral?gica das mat?rias-primas, e ensaios mec?nicos nos corpos de prova secos e queimados, precedendo-se de um planejamento de experimento de mistura, com o uso da metodologia de superf?cie de resposta, a fim de se obter as melhores combina?oes das mat?rias-primas para produzir massa cer?mica com propriedades especif?cas. As doze massas cer?micas estudadas foram preparadas pelo processo via seca, caracterizadas, conformadas por presagem uniaxial e sinterizadas nas temperaturas de 940?C, 1000?C, 1060?C, 1120?C, e 1180?C, utilizando um ciclo de queima r?pido. As fases cristalina formadas durante a sinteriza??o nas temperaturas em estudo, revelaram a presen?a de anortita e diopsita, al?m de quartzo com fase remanescente. Estas fases foram as principais respons?veis pelas propriedades f?sico-mec?nicas dos corpos de provas sinterizados. As fases cristalina formadas durante a sinteriza??o nas temperaturas em estudo, revelaram a presen?a de anortita e diopsita, al?m de quartzo com fase remanescente. Estas fases foram as principais respons?veis pelas propriedades f?sico-mec?nicas dos corpos de provas sinterizados. Os corpos de prova ap?s sinteriza??o apresentaram absor??o de ?gua superior a 10%, e uma boa estabilidade dimensional em todas as temperaturas estudadas, entretanto, os resultados da tens?o de ruptura ? flex?o nas temperaturas ( 940?C, 1000?C,e1060?C) abaixo da faixa de temperatura de gresifica?ao das massas cer?micas, n?o atigiram o valor de TRF especificado para revestimento poroso(15 MPa), por?m, na temperatura de 1120?C pr?xima da faixa da temperatura de gresifica??o, algumas massas cer?micas (formula??es) j? atingiram o valor especificado para revestimento poroso. Os resultados desse trabalho mostraram que, as mat?rias primas estudadas possuem grande potencial para serem utilizadas na fabrica??o de revestimento poroso (BIII)

In this work, it is proposed a mechanical behavior analysis of the soil-structure interaction from the development of a computational code using a coupling static formulation of Boundary Element Method (BEM) and Finite Element Method (FEM) for the displacements and stress calculation in structures in contact to the half space. Thus, it is intended to model the structure using the bending plate finite element DKT (discrete Kirchhoff triangle) and applying the concepts of the Boundary Element Method (BEM) formulation to model the soil, considered as a half- infinite and/or infinite space and using Kelvin s fundamental solution. The coupling between the media is done using the sub-regions technique. From the computational code development some practical examples of engineering are implemented, such as: soil-structure interaction analysis in superficial and buried plate foundations and others engineering structures, study on the behavior of a half- infinite space from the application of a distributed and concentrated load, analysis of bodies submitted to bend and traction, among others applications. / Fundação de Amparo a Pesquisa do Estado de Alagoas / Neste trabalho, propõe-se a análise do comportamento mecânico da interação solo -estrutura a partir do desenvolvimento de um código computacional utilizando-se uma formulação estática conjunta do Método dos Elementos de Contorno (MEC) e do Método dos Elementos Finitos (MEF) para o cálculo de deslocamentos e tensões em estruturas em contato com o meio semiinfinito. Assim sendo, pretende-se modelar a estrutura a partir de elementos finitos de placa DKT (discrete Kirchhoff triangle) e utilizar o conceito da formulação do Método dos Elementos de Contorno (MEC) para modelar o solo, considerando-o como um espaço semi- infinito e/ou infinito e utilizando a solução fundamental de Kelvin. O acoplamento entre os meios é feito aplicando-se a técnica de sub-regiões. A partir do desenvolvimento de um código computacional são processados alguns exemplos de engenharia tais como: análise da interação solo -estrutura em fundações de placa superficiais e enterradas e outras estruturas de engenharia, estudo do comportamento de um espaço semi- infinito a partir da aplicação de um carregamento distribuído e carga concentrada, análise de corpos submetidos à flexão e à tração, entre outras aplicações.

This study aims the development of a computational tool used to analyze two dimensional problems of soil-structure interaction, where soil is modeled by Boundary Element Method (BEM) and structures are treated by the Finite Element Method (FEM). Fundamental solutions of Kelvin 2D and Melan to BEM are implemented, where boundary elements with linear approximation are used. Structures modeled with FEM are discretized with two-dimensional frame finite elements. Coupling among media is done using the sub-region technique, where conditions of compatibility of displacements and equilibrium of tractions are applied to the interfaces between various sub-regions. Both soil and structures are considered as composed of homogeneous, isotropic, elastic and linear materials. However, sub-region technique allows the soil to be considered as stratified. Application for various acting loads, on structure or on soil, are considered slow, therefore the proposed analyses are statics. Examples are presented using the developed computational code. / Fundação de Amparo a Pesquisa do Estado de Alagoas / O presente trabalho tem como objetivo o desenvolvimento de uma ferramenta computacional para analisar problemas bidimensionais de interação solo-estrutura, onde o solo é modelado pelo Método dos Elementos de Contorno (MEC) e as estruturas são tratadas pelo Método dos Elementos Finitos (MEF). São implementadas as soluções fundamentais de Kelvin 2D e Melan para o MEC, onde elementos de contorno com aproximação linear são utilizados. As estruturas modeladas pelo MEF são discretizadas por elementos finitos de pórtico bidimensional. O acoplamento entre os meios é feito pela utilização da técnica de sub-regiões, onde condições de compatibilidade de deslocamentos e condições de equilíbrio de forças são aplicadas às interfaces entre as diversas sub-regiões. Tanto o solo quanto as estruturas são considerados como compostos por materiais homogêneos, isotrópicos, elásticos e lineares. Porém, a técnica de sub-regiões permite que o solo seja considerado como estratificado. A aplicação dos diversos carregamentos atuantes, na estrutura ou no solo, é considerada lenta, assim, as análises propostas são estáticas. São apresentados exemplos de aplicação do código computacional desenvolvido.

Submitted by Viviane Lima da Cunha (viviane@biblioteca.ufpb.br) on 2017-07-18T12:41:11Z No. of bitstreams: 1 arquivototal.pdf: 2094299 bytes, checksum: 783d6f9949086fb75e4a51fc3adbd48a (MD5) / Made available in DSpace on 2017-07-18T12:41:11Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 2094299 bytes, checksum: 783d6f9949086fb75e4a51fc3adbd48a (MD5) Previous issue date: 2016-04-22 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / In this work, new solutions based on the Boundary Element Method (BEM) are established for the linear analysis of bending and stability problems of Reddy-Bickford beams. All mathematical steps to write the BEM representation are properly presented: transformation of governing differential equations into equivalent integral equations, deduction of fundamental solutions, formation and solution of algebraic representation.In addition, elastic foundations (winkler and pasternak’s types) attached to Reddy-Bickford beams are solved by BEM as well. It is also addressed a convenient strategy for discontinuities in the area such as abrupt change in geometry of the cross section (stepped beam), intermediate axial load, intermediate supports (continuous beam). Numerical examples incorporating various types of discontinuities and boundary conditions in the field are presented to validate the solutions proposed BEM. / Neste trabalho, novas soluções, baseadas no Método dos Elementos de Contorno (MEC), são estabelecidas para a análise linear de problemas de flexão e estabilidade de barras de Bickford-Reddy. Todos os passos matemáticos para estabelecer a representação do MEC são apresentados: transformações das equações diferenciais governantes em equações integrais equivalentes, dedução das soluções fundamentais, obtenção e solução do sistema alébrico. Além disso, fundações elásticas (Winkler e Pasternak) em barras de Bickford-Reddy também são analisados pelo MEC. É também abordada uma conveniente estratégia para de discontinuidades no domínio tais como: mudança abrupta de geometria da seção transversal (viga escalonada), carga axial intermediária, apoios rígidos no domínio (viga contínua). Exemplos numéricos incorporando vários tipos de condições de contorno e discontinuidades no domínio são apresentadas para validar as soluções do MEC propostas.

Made available in DSpace on 2014-12-17T14:09:19Z (GMT). No. of bitstreams: 1 JonatasALJ_TESE.pdf: 9049452 bytes, checksum: dd9b668c8bc7791108be8a6bbc44e152 (MD5) Previous issue date: 2014-04-28 / A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity / Um prot?tipo vibr?til autoflotador de acionamento eletromec?nico para tratamento de ?gua de produ??o de petr?leo e emuls?o cong?nere ? apresentado e avaliado. A produ??o de petr?leo para refinamento e obten??o de derivados ? realizada sob modalidades tecnicamente referidas como on-shore e off-shore, isto ?, no continente e no mar. No Brasil 80% da produ??o petrol?-fera ? feita no mar e ?rea de implanta??o e escala de custo s?o preocupantes. Associa-se ?gua oleosa de produ??o, efluente abundante em larga escala, carreadora de 95% do potencial polu-idor da atividade cujo destino final ? o meio ambiente mar?timo ou terrestre. Embora diversi-ficado conjunto de t?cnicas e sistemas de tratamento d ?gua encontram-se em uso ou pesqui-sa, prop?e-se um sistema inovador que opera de forma sustent?vel sem aditivos qu?micos, pa-ra o bem do ecossistema. Utilizou-se labirinto adsorvente, em espirais met?licos, e escala la-boratorial de fluxo. Patentes de equipamento e processo s?o reivindicadas. Realizaram-se tra-tamentos em vaz?es e faixas de frequ?ncia distintas, monitoradas com sistemas de controle, uns constru?dos, outros aquistados para tal. Medi??es do teor de ?leo e graxa (TOG) do eflu-ente tratado mantiveram-se dentro do intervalo de enquadramento legal nas condi??es de en-saio. Pesaram-se os adsorventes antes e ap?s o tratamento para obten??o da impregna??o de ?leo, meta de desempenho da a??o vibrat?ria e tratamento como um todo. Tecnologias atuais de tratamento s?o referenciadas para compara??o de desempenho, qualitativa e quantitativa-mente. Confrontou-se consumo energ?tico operando-se em vibra??o, com e sem flota??o con-vencional, e com autoflota??o. Vislumbram-se boas perspectivas de rendimento do sistema proposto, sobretudo, na redu??o do tempo de resid?ncia por a??o de capilaridade. Criou-se o par?metro adimensional de impregna??o e se lhe confrontou com consagrados par?metros a-dimensionais, na vers?o vibracional, como n?mero de Weber e n?mero de Froud quadr?tico, referido como criticalidade vibr?til. Resultados sugerem limites ? intensidade vibrat?ria

Made available in DSpace on 2014-12-17T14:58:04Z (GMT). No. of bitstreams: 1 JoseAMN_DISSERT.pdf: 2578831 bytes, checksum: 78ca7925672b7876fad1b54e774b3827 (MD5) Previous issue date: 2010-12-30 / With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curau? and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curau? fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50% / Com o objetivo de promover o desenvolvimento sustent?vel, as fibras encontradas em abund?ncia na natureza, que s?o biodegrad?veis e de baixo custo quando comparado com as fibras sint?ticas, vem sendo utilizadas na aplica??o de produ??o de comp?sitos. Neste trabalho foi analisado o comportamento mec?nico ? partir do ensaio de tra??o e flex?o, em um comp?sito h?brido tendo como matriz uma resina sint?tica ortoft?lica refor?ada com fibras de curau? e fibras da folha de abacaxizeiro (PALF), nas propor??es de 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3), respectivamente, com as fibras de curau? e as fibras da folha do abacaxizeiro sendo tratadas quimicamente por uma solu??o aquosa de hidr?xido de s?dio (NaOH) com 8% de concentra??o. As an?lises mec?nicas indicaram que com rela??o aos estudos de tra??o, para a combina??o P1 e P3, foram obtidas melhores resultados de 22,17 MPa e 16,98 MPa, respectivamente, que ? maior que da outra combina??o de P2. Os resultados do mesmo padr?o foram obtidos para an?lise de flex?o onde P1 ? 1,21% e P3 de 0,96% que s?o maiores do que o resultado obtido da combina??o P2. No caso de resist?ncia ? flex?o, melhores resultados foram obtidos para a combina??o P1 de 49,07 MPa. Mas, quando foi calculado o m?dulo de Young, os valores foram diferentes do padr?o dos resultados dos outros testes realizados, com a combina??o P2 com o valor de 4,06 GPa que ? maior que das outras combina??es. Isto mostra que as fibras PALF tiveram uma influ?ncia maior com rela??o ? fibra de curau?. A an?lise dos resultados em geral demonstra que nas combina??es de duas fibras vegetais celul?sicas, uma ou a outra fibra com porcentagem maior (75%) ? a melhor op??o do que na composi??o de 50%/50%, entretanto no caso onde a aplica??o ser? para suportar cargas de flex?o, a melhor composi??o seria 50%/50%