Polyedrisk oligomer silsesquioxane (POSS) är molekyler som har en inorganisk ryggrad med organiska grupper fa ̈sta utan på. Själva kåren har en bur liknande form och har en hög termisk stabilitet tack vare kisel (Si) och syre (O) som den består av. Det organiska grupperna som kan fästas på kåren kan variera för att få en molekyl som är anpassad för det material den ska blandas in i, tillexempel polyvinylklorid (PVC). POSS molekylerna kan blandas in i material antigen fysiskt eller kemiskt beroende på vilka organiska grupper molekylen består av. Tack vare den termiska stabiliteten POSS är på en intressant molekyl att använda som ett alternativt flamskyddsmedel till existerande flamskyddsmedel.  Det olika POSS materialen var producerade med lite olika reaktions parametrar och var gjorda av Funzionano AS i Norge, Porsgrunn. Materialet har bevarat olika lång tid men det olika POSS materialen har också olika funktionella grupper. Provet med namn SF458 211122 var också adderat till PVC materialet för att se om det påverkade PVC:s termiska egenskaper.  Syftet med detta master arbete är att kolla om tiden proverna bevaras, olika funktionella grupper och om olika reaktions parametrar kommer påverka det termiska egenskaperna. Dessa parametrar utforskas genom att använda analys instrumenten TGA/DSC och DSC. Men också för att se om POSS förbättrar PVC:s termiska egenskaper.  Resultaten visar att 3 av det 4 olika SF458 proverna hade liknande glasstransaktions temperaturer (Tg) som är runt 27 °C även om det förvarats olika lång tid. 1 av det 4 olika SF458 hade högre Tg vilket kan bero p ̊a att den syntesen hade andra reaktions förhållanden i sista reaktions steget bland annat. Smältpunkten och mängden prov kvar efter TGA analyserna kan påverkas av förvaringstiden eller reaktions förhållandena. För att få fram vad som påverkar vad måste mer forskning göras. / Polyhedral oligomeric silsesquioxane (POSS) are molecules with an inorganic backbone which has organics groups attached to the backbone. The backbone is like a cage and the functional groups are arms that goes out from the cage. The inorganic backbone does so the molecule has high thermal stability and the functional groups make it possible to tailor the molecule so it can be easier to physical or chemical blend it into a material, like thermoplastics. The thermal properties of POSS make it to an interesting alternative as a flame retardant since it is also not has hazardous as other common flame retardants.  The different POSS material have been synthesised with some different reaction parameters and were prepared by Funzionano AS in Norway, Porsgrunn. The material have been stored for different times but also the cage have different functional groups attached to it. POSS named SF458 211122 were also physically incorporated to polyvinyl chloride (PVC) to see if it have any effect on the thermal properties.  The aim of the study is to see if the time of storage, different functional groups and different synthesis parameters affect the thermal properties of the POSS material by using DSC and TGA/DSC instruments. But also to see if the thermal properties of PVC is improved when POSS is physically added.  The results showed that 3 of 4 of the different SF458 samples had similar glass transition temperatures (Tg), around 27 °C so the time of storage does not affect that property. Since 1 of the 4 samples had a higher Tg is probably due to other synthesis conditions. The affect in melting point and amount of residue can be effected by either the time of storage or the parameters for the synthesis. So, further research needs to be done.

Plasticizers are a commonly used additive used in the polymer industry to make the plastic more pliable by reducing the glass transition temperature, Tg and Young's modulus, Y. As the plasticizer aids in polymer process-ability and making it suitable for applications from industrial cables to sensitive medical equipment, the mechanism of plasticization is not fully understood. There are three theories used to explain plasticization: lubricity theory, gel theory, and free volume theory. The latter is a fundamental concept of polymer science that is used to calculate many polymer properties, but they all do not give a clear picture on plasticization. With molecular dynamics (MD) simulation, a coarse-grained (CG) model - which consist of a simple bead-spring model that generalizes particles as a bead and connects them via a finite spring – is used to explore the impact of plasticizer size throughout the polymer system. The interaction characteristics of the plasticizer is explored by representing the plasticizer molecules as a single bead of varying size. This gives better control on the variability of the mixture and pinpoint the significant contributions to plasticization. A path to understanding the the mechanism of plasticization will give insight in glass formation, and can later be used to find an optimal plasticizer architecture to minimize the migration of the additive by tuning the compatibility. Current results show a decoupling between the Tg and Y of the polymer-additive system. The overall understanding of finite-size effects shows: as additive of increasing size is added, the polymer free volume increases which in-turn would decrease the Y, but Tg is shown to increase because the polymer and additive are not as mobile to reduce caging effect of monomeric units. / Thesis / Master of Applied Science (MASc)

Durante los últimos años en el sector del PVC plastificado existe cierta controversia con la utilización de plastificantes tradicionales basados en ftalatos, y usados de manera generalizada en la industria. Pese a que no ha sido del todo demostrado, este tipo de plastificantes presentan un riesgo tóxico potencial en el caso de que puedan migrar hacia el medio con el que están en contacto. Ello ha provocado que se haya limitado la utilización de este tipo de plastificantes en sectores como el envasado para la alimentación o el sector del juguete, en el que el producto está en contacto directo con alimentos o con niños. Sin embargo, en estos sectores, la utilización de PVC plastificado resulta en la práctica imprescindible debido al balance de propiedades que presenta el material y a la especificidad de sus procesos de fabricación. Por este motivo se están llevando a cabo investigaciones con plastificantes alternativos libres de ftalatos. Una de las líneas de investigación abiertas es la utilización de plastificantes de origen natural y de baja toxicidad. En esta tesis doctoral se han elegido tres plastificantes para PVC de origen natural y baja toxicidad: dos epoxiésteres de ácidos grasos y aceite de linaza epoxidado. El objetivo global de esta tesis doctoral es determinar si los plastificantes de origen natural son una alternativa real a los plastificantes tradicionales basados en ftalatos. Por ello, se han llevado a cabo una serie de análisis y ensayos para determinar la viabilidad de la utilización de este tipo de plastificante en la industria. En primer lugar, se ha llevado a cabo una optimización de los parámetros de curado con el fin de determinar si dichas condiciones son compatibles con los procesos de fabricación actuales utilizados en la industria. Se ha escogido una cantidad de los distintos plastificantes de origen natural de 70 phr, siendo ésta una formulación utilizada habitualmente en la industria. / Fenollar Gimeno, OÁ. (2011). Utilización de plastificantes naturales para la obtención de PVC flexible de bajo impacto medioambiental [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/11097

Yes / The chlor-alkali industries produce caustic soda (NaOH), chlorine (Cl2 ), and hydrogen (H2 ) as primary products. In 2021, the global chlor-alkali market was valued at $63.2 billion. The article evaluates the global aspects of chlor-alkali industries and prospects for Bangladesh. The current production capacity of NaOH from the chlor-alkali industries in Bangladesh is around 282,150 metric tons/year (MT/y). The by-products, chlorine (Cl2 ) of 250,470 MT/y and hydrogen (H2 ) of 7055 MT/y, are produced domestically. The local demand of Cl2 is 68,779 MT/y. However, there are no systematic utilizations of the residual Cl2 and vented H2 , which threatens the sustainability of the chlor-alkali industries. The article prefigures that a 150,000 MT/y PVC plant can utilize 45.2 % of residual Cl2 of chlor-alkali plants, which would be an economical and environmental milestone for Bangladesh. The residual Cl2 can earn revenue of 908 million USD/y, which can be utilized to import ethylene. For the sustainable utilization of vented H2 , production of H2O2 , fuel cell electric vehicle (FCEV) and H2 fuel-cell-based power plant are the feasible solutions. Thus, for the long-term growth of the chlor-alkali industry in Bangladesh and other developing countries, systematic utilization of Cl2 and H2 is the only feasible solution. / This research was funded by ‘BUET Chemical Engineering Forum (BCEF), 001-2020.

The aim of this degree project was to study the use and presence of plastic in municipal large-scale catering establishments from preschool to high school and in geriatric care. It was also to get a deeper knowledge about the substance BPA and the plastic PVC and their connection with food. The third aim was to lay forward some suggestions for Eskilstuna about continued work and substitution in their municipal large-scale kitchens. The means for data gathering was databases, websites, scientific reports, on site visits, interviews, online survey and communication by phone and email. The result from the case study was that plastic articles as containers, disposable materials, utensils and food packages for storing food were used in hot, ambient, cold and freezing temperatures. Nine types of plastic were found: PP, PE, PC, PVC, PA, PS, PET, melanin and SAN. All large-scale kitchens had disposable gloves, plastic films and plastic bags. In the first two examples, some brands were made of PVC-plastic. PC-plastic was found in some drinking glasses, plastic food pans, utensils, bowls and jugs. BPA is a common additive in production of PC-plastic and therefore these articles may contain BPA. Between all ten municipal large-scale kitchens, there are some differences and similarities. Of all the kitchens, no one had exactly the same articles or methods, and some had also special routines that differed from the others. The suggestions to Eskilstuna municipality were to remove those articles that contained BPA or chlorinated plastics (especially those products that already had an alternative on the procurement contract), contact the suppliers and wholesalers and ask which products that both are made of PC and contain BPA or other bisphenols, develop a exchange plan for products that do not fulfil the future regulations of KRAV and finally demand in procurement that the product do not contain BPA, PVC or other chlorinated plastics. / KRAV-certifiering av kommunala storkök inom Eskilstuna kommun

Ce travail de thèse concerne l'étude de l'écologie microbienne d'un atelier de découpe de viande bovine, dans le but de mieux comprendre la persistance bactérienne, c'est-à-dire, la présence répétée d'un même clone bactérien pendant une longue période malgré l'application bien conduite et régulière du nettoyage et de la désinfection (N-D). Des prélèvements par « chiffonnages » multiples de surfaces d'équipements ont été réalisés lors de trois campagnes de prélèvement espacées les unes des autres d'au moins six mois. Les prélèvements ont été réalisés sur un tapis convoyeur en polychlorure de vinyle (PVC) et sur des machines éplucheuses en acier inoxydable avant et après N-D. Nous avons quantifié les cellules totales (les cellules vivantes et les cellules mortes) par PCR quantitative en temps réel (qPCR), les cellules viables par EMA-qPCR, et les UFC (provenant de cellules cultivables) par dénombrement après incubation à 25°C sur gélose tryptone soja. Les résultats montrent qu'avant N-D, les cellules totales (en moyenne 5,6 – exprimé en log10 cellules/cm2 – sur PVC et 4,7 sur acier inoxydable) sont plus nombreuses que les cellules viables (4,5 sur PVC et 4,4 sur acier inoxydable) lesquelles sont plus nombreuses que les UFC (3,8 sur PVC et 2,9 sur acier inoxydable). Le N-D entraîne moins d'une réduction décimale (RD) des populations à l'exception des UFC sur acier inoxydable qui subissent 1,5 RD en moyenne. Ce dernier chiffre s'explique par des forces d'adhésion faibles. L'étude de la diversité des bactéries cultivables montre que sur un total de 51 genres identifiés, 13 seulement sont retrouvés lors des trois campagnes de prélèvements. Les isolats de ces 13 genres représentent 75, 72 et 62% des isolats des campagnes1, 2 et 3 respectivement. Parmi ces isolats, les plus fréquents sont (par ordre décroissant du nombre d'isolats) : Pseudomonas, Staphylococcus, Microbacterium, Acinetobacter, Chryseobacterium, Psychrobacter et Kocuria. Le génotypage d'isolats de 3 genres majoritaires (Staphylococcus, Pseudomonas et Acinetobacter) montre qu'une seule souche, Staphylococcus equorum, est sans aucun doute persistante. L'ensemble de ces observations montrent que l'écosystème varie d'une campagne à une autre. Ces modifications de la diversité bactérienne reflèteraient les modifications de flores des viandes traitées dans l'atelier, qui ont des origines multiples. En outre, il apparaît que, contrairement à ce qui est généralement admis, les bactéries à coloration de Gram négative cultivables sont plus facilement inactivées par le N-D que les bactéries à coloration de Gram positive. L'étude de l'écosystème par PCR-DGGE a permis d'identifier sept genres bactériens et montre que les espèces dominantes sont toutes sous forme vivante, autrement dit, aucune des espèces dominantes n'a été détectée uniquement sous forme de cellules mortes. Sur les sept genres identifiés six sont des Gram – dont majoritairement les genres Acinetobacter, Pseudomonas et Psychrobacter. Cette dominance montre que le N-D permet une forte perte de cultivabilité des bactéries Gram – mais qu'une grande partie n'est pas détachée. La dominance des bactéries Gram – observée par PCR-DGGE masque les staphylocoques qui ne sont pas détectés alors qu'ils sont majoritaires parmi la flore cultivable. Seul un genre bactérien, Propionibacterium, est identifié par PCR-DGGE uniquement mais il n'est trouvé qu'à une seule campagne et uniquement sur l'acier inoxydable avant N-D. En conclusion, l'avancée majeure de ce travail est la mise en évidence qu'une proportion importante de bactéries survit après les opérations très poussées de N-D mais pour une période transitoire. / The aim of this work is to acquire a better knowledge of the microbial ecology of a beef processing plant to understand bacterial persistence, e.g. the presence of a clone isolated several times on several visits in the same processing plant despite regular Cleaning and disinfection (C&D) procedures. Successive swabbing were performed on a PVC conveyor belt and skinning machines made of stainless steel before and after C&D during three surveys in minimal 6 month-intervals. Total cells (live and dead cells) were quantified using real-time quantitative PCR (qPCR). Viable cells e.g. cells with intact membrane, were assessed using Ethidium Monoazide combined with qPCR. Culturable cells (CFU) were determined from plate counts on Tryptone Soy Agar. Before C&D, total cells (5.6 log cells/cm2 and 4.7 log10 cells/cm2 on PVC and stainless steel respectively) were greater than viable cells (4.5 and 4.4 log10 cells/cm2) and CFUs (3.8 and 2.9 log10 CFU/cm2). C&D lead to less than 1 log10 reduction in bacterial populations except for CFU counts on stainless steel where a 1.5 log reduction is observed. This result is highlighted by the weak attachment strengths observed on stainless steel for CFUs. Identification of the culturable microbiota revealed that out of 51 genera identified, 13 were found at all the visits. These genera represented 75, 72 and 62% of the total isolates. The most frequently identified bacteria were Pseudomonas, Staphylococcus, Microbacterium, Acinetobacter, Chryseobacterium, Psychrobacter and Kocuria. Molecular typing of three dominant genera (Staphylococcus, Pseudomonas and Acinetobacter) showed that only one strain, Staphylococcus equorum, was persistent in the premises. Our results show that the microbial ecosystem is different from one survey to another, which reflect the various geographical origins of meat products. Contrary to widespread belief, Gram negative strains were more easily eliminated by C&D than Gram positive strains. Furthermore, the microbial diversity assessed by PCR-DGGE allowed the identification of 7 genera. This molecular approach showed that dominant species are all in a viable state: none of these species was solely detected in a dead state. Of the 7 genera identified, 6 were Gram negative, Acinetobacter, Pseudomonas and Psychrobacter being predominant. This result highlights that C&D induced the lost of culturability of Gram negative bacteria although a high proportion was not detached from the surface. The predominance of Gram negative microflora, didn’t allow the detection of staphylococcal isolates which were numerous in the culturable microflora. One genus, Propionibacterium, isolated in one survey on stainless steel before C&D was only identified by PCR-DGGE. In conclusion, the present study has demonstrated that a large proportion of bacteria can survive drastic cleaning and disinfection for a transient period.

Um tipo de composto têxtil, comumente chamado de membrana têxtil, tem sido empregado, nas últimas décadas, como parte de um sistema arquitetônico usado para a cobertura, fechamento e/ou proteção de espaços públicos e privados em vários países do mundo. O termo membrana está relacionado com o fato de o material permanecer tensionado e separar dois ambientes que se interagem. Essa solução arquitetônica é comumente conhecida como arquitetura têxtil, especialmente quando se trata de estruturas tensionadas; o termo é usado por muitos profissionais em todo mundo, apesar de não existir uma unanimidade de opiniões sobre os conceitos envolvidos na definição do termo e o que ele abrange. Na maior parte dos casos, as obras geradas são muito atraentes, práticas e funcionais, com características, formas e tamanhos diversos, dependendo da necessidade a ser atendida. Quando bem projetadas, integram-se perfeitamente ao ambiente por terem formas orgânicas e passarem uma imagem de leveza, fluidez e modernidade. São dois os tipos de membranas têxteis mais usados: 1) um grupo de membranas cujo tecido estruturante é um tecido de poliéster recoberto em ambos os lados por uma camada de cloreto de polivinila (PVC), e 2) um grupo de membranas feitas com tecidos de vidro recobertos com politetraflúoretileno (PTFE). O foco principal deste trabalho são as membranas de poliéster/PVC usadas para estruturas tensionadas. Os tecidos usados nessa gama estão enquadrados na categoria denominada tecidos técnicos, e são formados por fios compostos por filamentos de poliéster de alta tenacidade de diferentes tipos, gerando vários artigos com características técnicas distintas e, consequentemente, membranas com diversas especificações e comportamentos diferentes na aplicação final.Este estudo traz uma visão geral sobre o assunto no mundo e um panorama mais detalhado para o Brasil, abordando definições, termos usados, materiais, fornecedores, especificações, tipos de produtos e acabamentos, normas, reciclagem e meio ambiente. A beleza e modernidade são apontadas como as principais qualidades desse tipo de cobertura. As expectativas são de crescimento dessa aplicação para os próximos anos. Porém a falta de conhecimento e a complexidade técnica desse tipo de solução é um problema a ser solucionado para que melhores resultados sejam atingidos e ela possa realmente ser considerada uma solução viável e adequada para o país. / The type of textile compound, commonly called textile membrane, has been employed in recent decades, as part of an architectural system used for covering, closing and/or protection of publics and private spaces in many countries around the world. The term membrane is related to the fact that the material remains tensioned and separating two interacting environments. This architectural solution is commonly known as \' textile architecture \', especially when tensile structures are involved; this term is used by many professionals worldwide, although it do not exist a unanimity of opinions regarding the concepts involved in the definition of the term and what it encompasses. In most cases, the structures generated are very attractive, practical and functional, with different characteristics, different shapes and sizes, depending on the requirements to be met. When well designed, they will be seamlessly integrated with the environment by having organic forms, giving a feeling of lightness, fluidity and modernity. The two types of textile membranes commonly used are: 1) a group whose structuring material of the membrane is a polyester fabric coated, on both sides, with a layer of polyvinyl chloride (PVC), and 2) a group of membranes made with glass filament fabrics coated with polytetrafluoretilene (PTFE). The focus of this work is the polyester/PVC membranes used for tensile structures. The fabric used in this range is framed within the category named \'technical fabrics\', and are composed by different kinds of high tenacity yarns of polyester filaments, generating several articles with different technical characteristics and consequently, membranes with different specifications and different behaviors in the final application. The study provides an overview of the subject in the world and a panorama slightly more detailed for Brazil, covering definitions, terms, used materials, suppliers, specifications, product types and finishes, recycling and environment issues. The \' beauty \' and \' modernity \' are cited as the main qualities of this type of covering. There are expectations of growing of this application for coming years. But the lack of knowledge and the technical complexity of this kind of solution is a problem to be solved, so that best results can are achieved and it can really be considered a viable and appropriate solution for the country.

RESUME Le travail de thèse porte sur le développement d’électrodes sélectives originales et performantes pour l’analyse de composés d’intérêt pharmaceutique. La partie introductive traite des notions relatives à l’électrochimie mais également de notions sur les molécules médicamenteuses étudiées, en l’occurrence les principes antipaludéens et l’iode. La partie expérimentale se subdivise en deux parties distinctes selon le type d’électrodes sélectives auxquelles font appel les techniques électrochimiques. La première partie concerne l’élaboration, la caractérisation et l’application des électrodes potentiométriques à membrane polymérique incluant une paire d’ions et sélectives à diverses molécules organiques pharmacologiquement actives (antipaludéens). Leur application aussi bien en analyse pharmaceutique qu’en cinétique de dissolution est décrite. La deuxième partie est consacrée à l’élaboration d’un type de senseur ampérométrique original à pâte de carbone à base d’argent micronisé ou colloïdal et à la comparaison de ses performances avec l’électrode d’argent métallique. L’intérêt analytique est mis en évidence par la détermination quantitative des iodures. Les différents aspects susceptibles d’influencer leur comportement, dont la nature des agents précipitants (tétraphénylborate de sodium et le tétrakis (4-chlorophényl) borate de potassium) et de plastifiants ont été investigués. Les bonnes performances des ces électrodes en analyse quantitative ont permis d’explorer les possibilités de leur utilisation à l’étude de la cinétique de dissolution. L’ampérométrie à électrode à pâte de carbone modifiée à base d’argent à l’échelle micronisée (35% m/m) couplée à la chromatographie liquide ionique s’est avérée très sensible vis-à-vis des iodures en particulier et des halogénures en général. Les facteurs susceptibles d’influencer les grandeurs de séparation et la réponse de l’électrode ont été investigués et l’exploitation du signal ampérométrique permet le dosage sélectif et rapide de faibles concentrations en iodures. Les informations fournies par les mesures réalisées en voltampérométrie cyclique à l’aide des mêmes électrodes permettent une bonne compréhension mécanistique quant au mode de détection ampérométrique évitant ainsi toute confusion à ce sujet et permettant l’optimisation du processus de détection. ------------------------------------------------ ABSTRACT This thesis describes the development of original and high performance selective electrodes for the analysis of several pharmaceutical compounds. The introduction describes the pharmaceutical compounds of interest (antimalarial drugs and iodine) and provides an overall understanding of the electrochemical groundwork pertaining to their analysis. The experimental aspect of the thesis is divided into two parts, each according to the type of electrode and electrochemical technique used for the analysis. The first part describes the design, characterization, and application of polymer membrane based ion selective potentiometric electrodes. Selectivity was provided by including ion pairs of several antimalarial drugs into the membrane. The feasibility of use of these electrodes in pharmaceutical analysis as well as in dissolution trials is also described in this part. The second part describes the design of an original silver-modified carbon paste amperometric sensor and compares its performances to those of a plain metallic silver electrode. The electrode has been modified by silver microparticles or by silver nanoparticles. Quantitative iodine determination serves to prove the usefulness of this new sensor in analytical chemistry. Different aspects, such as the nature of the counter ions (sodium tetraphenylborate and potassium tetrakis (4-chlorophenyl) borate) and the plastifying agents that are likely to influence electrode behaviour have been investigated. Since the electrodes have been shown to perform well in quantitative analysis, the possibility of use in dissolution trials was explored. Micronized silver-modified carbon paste electrode (35% Ag m/m) coupled to anionic-exchange liquid chromatography with amperometric detection was shown to be very sensitive with regards to the assay of halogenides in general and iodide in particular. After having investigated the various factors likely to influence chromatographic separation and electrode response, it was shown that the sensor could be used to rapidly and selectively determine low iodide concentrations in complex samples. Cyclic voltammetric analysis provided information concerning the mechanisms allowing amperometric detection, thus allowing an optimisation of the detection procedures.

Une baisse constatée de la résistivité de l'isolation en PVC de certains câbles haute tension unipolaires conduit à s'interroger sur leur aptitude à assurer leur fonction. Cette étude avait pour objectif de fournir des éléments de réponse concernant en particulier l'origine de cette variation de résistivité et ses conséquences sur la tenue diélectrique. Les caractérisations ont porté sur des câbles usagés dont les propriétés avaient évolué au cours de leur utilisation. Les caractérisations physico-chimiques (spectroscopie et microscopie IR, spectroscopie UV, MEB-EDX et coulométrie) ont mis en évidence que le vieillissement du câble résultait d'un mécanisme de déshydrochloruration. La présence de deux modes de conduction dans le matériau a été observée : une conduction électronique à basse température (< -10°C) et une conduction ionique à température ambiante et au-delà. La présence de ces deux modes de conduction est compatible avec le mécanisme de déshydrochloruration. Au contraire d'une loi d'Arrhénius, les vieillissements artificiels ont mis en évidence un effet de seuil de température dans l'activation du mécanisme à l'origine de la chute de résistivité. La tenue diélectrique des câbles a été confortée par des essais à des tensions ou à des températures bien au-delà des valeurs nominales. Les mesures de calorimétrie différentielle à balayage (DSC) ont mis en évidence des surchauffes ponctuelles plus ou moins prononcées qui se corrèlent aux chutes de résistivités constatées, et peuvent donc être considérées comme étant à l'origine des évolutions constatées. / The observed decrease in the resistivity of the PVC insulation of some high voltage unipolar cables led to question their ability to perform their function. Provide answers concerning in particular the origin of the variation in resistivity and the impact on the dielectric strength were the objectives of this study. The characterizations were carried on cables withdrawn from service whose properties had changed during their use. Physico-chemical characterization (IR microscopy, UV spectroscopy, SEM - EDX and coulometry) showed that aging of the cable resulted from a mechanism of dehydrochlorination. The presence of two modes of electric conduction in the material was observed: electronic conduction at a low temperature (< -10 ° C) and ionic conduction at room temperature and beyond. The presence of these two modes of conduction is consistent with the mechanism of dehydrochlorination. In contrast to an Arrhenius law, artificial aging showed a threshold effect in the thermal activation of the mechanism at the origin of the resistivity drop. The dielectric strength of the cable has been confirmed by tests at voltages or temperatures well beyond the nominal values. Measurements of differential scanning calorimetry (DSC) showed occasional more or less pronounced overheatings that correlate with the resistivity drops, and can therefore be considered as being at the origin of the observed evolutions.

Made available in DSpace on 2014-12-17T14:57:40Z (GMT). No. of bitstreams: 1 RaimundoNAC.pdf: 846914 bytes, checksum: 05f5ca2a386c7e7ce11ac1dae42ab71d (MD5) Previous issue date: 2007-06-01 / An solar alternative system for water heating is presented. Is composed for one low cost alternative collector and alternative thermal reservoir for hot water storing. The collector of the system has box confectioned in composite material and use absorption coils formed for PVC tubes. The box of hot water storage was confectioned from a plastic polyethylene drum used for storage of water and garbage, coated for a cylinder confectioned in fiber glass. The principle of functioning of the system is the same of the conventionally. Its regimen of work is the thermosiphon for a volume of 250 liters water. The main characteristic of the system in considered study is its low cost, allowing a bigger socialization of the use of solar energy. It will be demonstrated the viabilities thermal, economic and of materials of the system of considered heating, and its competitiveness in relation to the available collectors commercially. Relative aspects will be boarded also the susceptibility the thermal degradation and for UV for the PVC tubes. It will be shown that such system of alternative heating, that has as main characteristic its low cost, presents viabilities thermal, economic and of materials / Apresenta-se um sistema de aquecimento solar de ?gua, trabalhando em regime de termossif?o, constitu?do por um, coletor solar alternativo e um reservat?rio armazenador de ?gua tamb?m alternativo. O coletor foi constru?do com um material comp?sito a base de gesso e isopor e o reservat?rio t?rmico a partir de um tambor de polietileno de 200 litros utilizado para armazenamento de ?gua e lixo recoberto por um cilindro em fibra de vidro, tendo isopor triturado entre as duas superf?cies. A utiliza??o do comp?sito e a nova forma de obten??o da grade absorvedora permitem que o coletor apresente apenas tr?s elementos ao inv?s dos cinco caracter?sticos de um coletor convencional, diminuindo, portanto o seu custo. A superf?cie absorvedora dos coletores foi montada utilizando-se tubos de PVC pintados de preto fosco, ligados atrav?s de uma configura??o em paralelo, utilizando como elementos de liga??o conex?es em T de PVC de mesmo di?metro. Ser?o apresentados dados de efici?ncia e perda t?rmicas que demonstram a efici?ncia t?rmica do sistema de aquecimento proposto Abordarse-? tamb?m aspectos relativos a susceptibilidade de degrada??o dos tubos de PVC quando expostos a radia??o solar. Mostrar-se-? que tal sistema de aquecimento alternativo, que tem como principal caracter?stica seu baixo custo, apresenta viabilidades t?rmica, econ?mica e de materiais