Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2007. / Submitted by Luis Felipe Souza (luis_felas@globo.com) on 2008-12-05T15:43:28Z No. of bitstreams: 1 Tese_2007_EduardoLopezPastor.pdf: 4602149 bytes, checksum: 89c155982fbadd7bf934bdd5711fa9f4 (MD5) / Approved for entry into archive by Georgia Fernandes(georgia@bce.unb.br) on 2009-02-17T17:53:24Z (GMT) No. of bitstreams: 1 Tese_2007_EduardoLopezPastor.pdf: 4602149 bytes, checksum: 89c155982fbadd7bf934bdd5711fa9f4 (MD5) / Made available in DSpace on 2009-02-17T17:53:24Z (GMT). No. of bitstreams: 1 Tese_2007_EduardoLopezPastor.pdf: 4602149 bytes, checksum: 89c155982fbadd7bf934bdd5711fa9f4 (MD5) / Esta Tese descreve a criação, o desenvolvimento e a aplicação de um novo algoritmo híbrido heurístico-GA (HGA) para a otimização dos mecanismos de Alocação de Rota e Comprimento de onda (RWA) dinâmico visando sobrevivência (S-DRWA), orientado à reserva de capacidade baseado em compartilhamento de rotas de proteção e aplicado em redes de transporte IP sobre WDM. Nesta operação conjunta, heurísticas fazem a seleção dos melhores caminhos de trabalho com seus respectivos caminhos backup e o Algoritmo Genético faz o aprovisionamento para o “melhor” par de rotas trabalho/proteção com a alocação do comprimento de onda adequado, estabelecendo assim o caminho requerido. ______________________________________________________________________________________ ABSTRACT / This thesis describes the creation, development and application of a novel hybrid Heuristic-GA algorithm, for the optimization of dynamic routing and wavelength assignment mechanisms with survivability (S-DRWA), guided to the reserve of capacity based on sharing routes protection and applied in IP transport network over WDM. In this joint operation, heuristics make the election of the best routes with their respective backup routes and the Genetic Algorithm makes the “best” provision for pair of routes working/protection with the allocation of the adjusted wavelength, thus establishing the required route.

The Russian wheat aphid (Diuraphis noxia, RWA), is a serious pest in most wheat producing countries around the world. Infestation of wheat fields by this pest has a severe economic impact, as a result of heavy losses in crop yield. Because of the importance of wheat as a food source and its ever growing supply demand, the study of wheat-Russian wheat aphid interactions on the molecular level are integral to the development of management strategies. This is highlighted by the fact that new RWA biotypes that overcome resistance in a number of wheat varieties, continually emerge. Therefore, this study aims to contribute to this endeavour, by elucidating the molecular mechanisms by which the RWA resistance gene Dn7 confers resistance to three different RWA biotypes (one from SA, and two from the USA). Firstly, suppression subtractive hybridization (SSH) was applied in order to isolate transcripts differentially expressed in the RWA resistant wheat line, 94M370, carrying the Dn7 gene. There are two main advantages to this technique. One is that the relative representation of rare transcripts is increased in the subsequent cDNA population, and it is these low abundance transcripts that are arguably the ones of particular interest. Secondly, this method allows for the isolation of unknown transcripts, without the need for existing sequence information. Experiments with this method however, failed, leading to an investigation as to probable causes. The various steps involved in the SSH procedure were individually assessed in an attempt to identify and correct the problem. Various adjustments were made to PCR procedures, template enzyme digestions and ligation reactions, without success. After creating a basic cDNA-AFLP fingerprint from the existing cDNA template, in order to confirm that the template is not responsible for experimental difficulties – it was decided to apply a different strategy in order to meet research objectives. Consequently, the study on Dn7 mediated defence responses was continued with cDNA-AFLP. In addition to studying the response by Dn7 to South African biotype RWA infestation, its responses to infestation by two United States RWA biotypes was also explored. This allowed us to gain a greater comprehension of the methods by which Dn7 activates defences against different aphid eliciting agents. Findings suggest that this gene activates responses that are unique to each of the different aphid interactions. Although the interactions between Dn7 and the two US biotypes were very similar, this can possibly be explained by the fact that the differences between these two biotypes on molecular level are minuscule. Dn7 responds to the South African biotype of the RWA in a completely different manner, as judged by the very dissimilar expression patterns obtained during cDNA-AFLP analysis. Reasons for this phenomenon could include molecular differences between the South African and US RWA biotypes, differences in response generating elicitor molecules (which has indeed been shown to be the case between South African and US aphid biotypes), or a combination of both. The sequencing of fragments displaying differential expression patterns during cDNA-AFLP fingerprinting, provides us with additional information as to the exact mechanisms potentially involved. As expected, various compounds related to plant defence were identified, such as a number of Leucine rich repeat (LRR) domain containing proteins, genes related to cell signalling and genes involved in protein processing (proteases, peptidases). Finally, these results are consistent with theories that Dn7 may recognise and interact with its distinct aphid elicitors either directly, by the presence of multiple bindings sites on the same protein, or indirectly. In that case, in accordance with the guard hypothesis, Dn7 may simply monitor interactions between aphid elicitors and other recognition factors- after which a response cascade is activated. Useful potential research would focus on Dn7 itself, including mapping, isolation as well as structural and functional characterization. / Dissertation (MSc)--University of Pretoria, 2007. / Genetics / unrestricted

Worldviews can shape the way in which we perceive the world. They can also shape the way in which we identify with our ingroup. Conceptualizing national identification as national attachment and glorification, four studies (total N = 1795) tested the association between endorsement of a harmonious or a dangerous worldview and national identification. Study 1 established the harmonious worldview and refined the dangerous worldview scale. Study 2 examined these relationships correlationally, and highlighted the prejudicial ideologies of right wing authoritarianism (RWA) and social dominance orientation (SDO) as mediators to this association. Study 3 examined this relationship longitudinally, across the span of two months. Study 4 successfully manipulated dangerous but not harmonious worldviews, partially establishing a cause-and-effect relationship between worldviews and national identification. A dangerous worldview predicted increased attachment and glorification via increased RWA and SDO. Contrary to our expectation, a harmonious worldview predicted decreased attachment and glorification via increased RWA and SDO. These effects remained significant two months later, and when controlling for other key worldviews such as belief in a competitive world. Crucially, for liberals, but not moderates or conservatives, a harmonious worldview predicted increased attachment as well as decreased glorification.

Para satisfazer o explosivo aumento na demanda de tráfego de voz e dados, as redes ópticas baseadas em WDM e GMPLS estão sendo desenvolvidas. A suíte de protocolos GMPLS é atualmente considerada como um plano de controle para as redes ópticas e é composta por protocolos de sinalização e de roteamento, como também do protocolo de gerenciamento de enlace (LMP). O LMP é um importante protocolo que interfere na atribuição de rótulos (comprimentos de onda) e é necessário fazer sua análise lógica para verificar se o mesmo está livre de erros de progresso. Para esta finalidade, o método denominado alcançabilidade justa foi utilizado. Verificada a corretude do LMP, o estudo foca o subproblema de atribuição de comprimento de onda do RWA nas redes GMPLS-WDM por ser um dos principais problemas que causam o baixo desempenho destas redes. O cenário estudado é das redes GMPLS-WDM que operam em um ambiente RWA dinâmico com restrição de continuidade de comprimento de onda. O problema RWA é examinado bem como as várias heurísticas de atribuição de comprimento de onda apresentadas na literatura. Com o objetivo de melhorar o desempenho das redes GMPLS-WDM com restrição de continuidade de comprimento de onda, propõe-se um algoritmo de atribuição de rótulos que utiliza os conceitos conjunto de rótulos e SRLG já implementados pelo GMPLS. O algoritmo proposto melhora a eficiência no uso de recursos nas redes em questão. O desempenho é verificado através da métricas de probabilidade de bloqueio de conexão, desempenho este próximo do ótimo e demonstrado através de simulações. / To satisfy the explosive increasing demands of voice and data traffic, optical networks based on WDM and GMPLS are being developed. The GMPLS´ suite of protocols is currently being considered as the control plane for optical networks and it is compounded of signaling and routing protocols, and also the link management protocol (LMP). The LMP is an important protocol that interferes with label (wavelength) assignment and it is necessary to logically analyse this protocol in order to verify if it is free from progress errors. For this purpose, the method called fair reachability has been used. Verified the LMP is correctable, the study focuses on the RWA wavelength assignment problem in GMPLS-WDM networks because it is one of the main problems which causes the low performance of these networks. The studied scene is GMPLS-WDM networks operating under a dynamic RWA environment with wavelength continuity constraint. The RWA problem is examined and also the various wavelength-assignment heuristics proposed in the literature. With the goal to improve the performance of the GMPLS-WDM networks with wavelength continuity constraint, it is proposed a label assignment algorithm, which uses the concepts of label set and SRLG, already implemented by GMPLS. The proposed algorithm provides an improvement in efficiency of resource use. The performance is verified by using the blocking probability metric, and it is very close to the optimum and demonstrated through simulations.

When banks lend capital to counterparties they take on a risk, known as credit risk which traditionally has been the largest risk exposure for banks. To be protected against potential default losses when lending capital, banks must hold a regulatory capital that is based on a regulatory formula for calculating risk weighted assets (RWA). This formula is part of the Basel Accords and it is implemented in the legal system of all European Union member states. The key parameters of the RWA formula are probability of default, loss given default and asset correlation. Banks today have the option to estimate the probability of default and loss given default by internal models however the asset correlation must be determined by a formula provided by the legal framework. This project is a first approach for Handelsbanken to study what would happen if banks were allowed to estimate asset correlation by internal models. We assess two models for estimating the asset correlation of a portfolio of Small and Medium Enterprices (SME). The estimates are compared with the asset correlation given by the regulatory formula and with estimates for another parameter called default correlation. The models are validated using predicted historical data and Monte-Carlo Simulations. For the studied SME portfolio, the models give similar estimates for the asset correlations and the estimates are lower than those given by the regulatory formula. This would imply a lower capital requirement if banks were allowed to use internal models to estimate the asset correlation used in the RWA formula. Default correlation, if not used synonymously with asset correlation, is shown to be another measure and should not be used in the RWA formula. / När banker lånar ut kapital till motparter tar de en risk, mer känt som kreditrisk som traditionellt har varit den största risken för banker. För att skydda sig mot potentiella förluster vid utlåning måste banker ha ett reglerat kapital som bygger på en formel för beräkning av riskvägda tillgångar (RWA). Denna formel ingår i Basels regelverk och är implementerad i rättssystemet i alla EU-länder. De viktigaste parametrarna för RWA-formeln är sannolikheten att fallera, förlustgivet fallissemang och tillgångskorrelation. Bankerna har idag möjlighet att beräkna de två variablerna sannolikheten att fallera och förlustgivet fallissemang med interna modeller men tillgångskorrelation måste bestämmas med hjälp av en standardformel givet från regelverket. Detta projekt är ett första tillvägagångssätt för Handelsbanken att studera vad som skulle hända om banker fick beräkna tillgångskorrelation med interna modeller. Vi analyserar två modeller för att skatta tillgångskorrelation i en portfölj av Små och Medelstora Företag (SME). Uppskattningarna jämförs sedan med den tillgångskorrelation som ges av regelverket och jämförs även mot en parameter som kallas fallissemangskorrelation. Modellerna som används för att beräkna korrelationerna valideras med hjälp av estimerat data och Monte-Carlo Simuleringar. För den studerade SME portföljen ges liknande uppskattningar för de båda tillgångskorrelationsmodellerna, samt visar det sig att de är lägre än den korrelationen som ges av regelverket. Detta skulle innebära ett lägre kapitalkrav om bankerna fick använda sig av interna modeller för att estimera tillgångskorrelation som används i RWA-formeln. Om fallissemangskorrelation inte används synonymt till tillgångskorrelation, visar det sig att fallisemangskorrelation är en annan mätning än tillgångskorrelation och bör inte användas i RWA-formeln.

Made available in DSpace on 2015-05-14T12:36:49Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 2456764 bytes, checksum: 4ac348983da5718e79b705aa01b9aa0a (MD5) Previous issue date: 2014-08-15 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / This dissertation proposes two new algorithms for routing and wavelength allocation EA-RWA (Energy Aware Routing and Wavelength Assigment) and IEA-RWA (Impairment and Energy Aware Routing and Wavelength Assigment). The algorithms have the characteristic, improve energy efficiency in dynamic transparent optical networks, the first being simpler, because it does not care about the imperfections of the physical layer. The EA-RWA is compared with a traditional RWA / classic that does not take into account at the time of admission of the physical layer connections restrictions nor energy consumption algorithm. Have the IEA-RWA is compared with a RWA algorithm that takes into account the constraints (IA-RWA) physical layer. Numerical simulations show that the IEA-RWA performs better in many aspects / Esta dissertação propõe dois novos algoritmos de roteamento e alocação de comprimento de onda, a saber, o EA-RWA (Energy Aware Routing and Wavelength Assigment) e o IEA-RWA (Impairment and Energy Aware Routing and Wavelength Assigment). Os algoritmos terão como característica, melhorar a eficiência energética em redes ópticas transparentes dinâmicas, sendo o primeiro mais simples, pois não se preocupa com as imperfeições da camada física. O EA-RWA é comparado com um algoritmo RWA tradicional/clássico que não leva em conta, no momento de admissão de conexões, restrições da camada física e nem consumo de energia. Já o IEA-RWA é comparado com um algoritmo RWA que leva em conta restrições da camada física (IA-RWA). As simulações numéricas mostram que o IEA-RWA apresenta melhor desempenho em vários aspectos

Para satisfazer o explosivo aumento na demanda de tráfego de voz e dados, as redes ópticas baseadas em WDM e GMPLS estão sendo desenvolvidas. A suíte de protocolos GMPLS é atualmente considerada como um plano de controle para as redes ópticas e é composta por protocolos de sinalização e de roteamento, como também do protocolo de gerenciamento de enlace (LMP). O LMP é um importante protocolo que interfere na atribuição de rótulos (comprimentos de onda) e é necessário fazer sua análise lógica para verificar se o mesmo está livre de erros de progresso. Para esta finalidade, o método denominado alcançabilidade justa foi utilizado. Verificada a corretude do LMP, o estudo foca o subproblema de atribuição de comprimento de onda do RWA nas redes GMPLS-WDM por ser um dos principais problemas que causam o baixo desempenho destas redes. O cenário estudado é das redes GMPLS-WDM que operam em um ambiente RWA dinâmico com restrição de continuidade de comprimento de onda. O problema RWA é examinado bem como as várias heurísticas de atribuição de comprimento de onda apresentadas na literatura. Com o objetivo de melhorar o desempenho das redes GMPLS-WDM com restrição de continuidade de comprimento de onda, propõe-se um algoritmo de atribuição de rótulos que utiliza os conceitos conjunto de rótulos e SRLG já implementados pelo GMPLS. O algoritmo proposto melhora a eficiência no uso de recursos nas redes em questão. O desempenho é verificado através da métricas de probabilidade de bloqueio de conexão, desempenho este próximo do ótimo e demonstrado através de simulações. / To satisfy the explosive increasing demands of voice and data traffic, optical networks based on WDM and GMPLS are being developed. The GMPLS´ suite of protocols is currently being considered as the control plane for optical networks and it is compounded of signaling and routing protocols, and also the link management protocol (LMP). The LMP is an important protocol that interferes with label (wavelength) assignment and it is necessary to logically analyse this protocol in order to verify if it is free from progress errors. For this purpose, the method called fair reachability has been used. Verified the LMP is correctable, the study focuses on the RWA wavelength assignment problem in GMPLS-WDM networks because it is one of the main problems which causes the low performance of these networks. The studied scene is GMPLS-WDM networks operating under a dynamic RWA environment with wavelength continuity constraint. The RWA problem is examined and also the various wavelength-assignment heuristics proposed in the literature. With the goal to improve the performance of the GMPLS-WDM networks with wavelength continuity constraint, it is proposed a label assignment algorithm, which uses the concepts of label set and SRLG, already implemented by GMPLS. The proposed algorithm provides an improvement in efficiency of resource use. The performance is verified by using the blocking probability metric, and it is very close to the optimum and demonstrated through simulations.

The energy consumption of communication networks is continuously growing. Many energy saving approaches have been proposed at the device, system, and network level. The most promising way to address this problem is to utilize photonic technologies as much as possible thanks to their low energy consumption per bit performance. Moreover, several approaches have been proposed to further reduce the energy consumption in optical networks. One popular technique exploits low power modes (e.g., sleep or doze mode) for devices that are not used. However, sleep mode based approaches may affect the way optical connections (i.e., lightpaths) are routed, or alter the characteristics of some devices. This in turn may have a detrimental impact on crucial network/device performance parameters. In other words a green approach may introduce additional delay, change the level of resource utilization in the network, or even impact the lifetime of a device, resulting in increased network operational cost. This thesis provides a study that carefully assesses, in both access and core networks, the trade-off between the benefits of sleep-based energy-efficient schemes and their possible side-effects. In fiber access networks putting a device into sleep mode and waking it up can introduce a significant energy overhead. Already proposed energy-efficient approaches reduce this overhead by aggregating as much as possible the traffic before a transmission. However, aggregating data may cause an additional delay that in some cases might not be acceptable. This thesis investigates the trade-off between energy saving and additional packet delay in the case of a LTE backhaul network based on wavelength division multiplexing passive optical network (WDM-PON). The thesis proposes a novel energy-efficient approach based on the dozing concept able to precisely control when a transmitter needs to wake up in order to maximize the time spent in sleep mode, while assuring that packet transmissions are completed before a given deadline. The proposed scheme is also able to exploit possibly diverse traffic delay requirements to further improve energy saving performance. In optical core networks, one way to decrease the energy consumption is to minimize the number of used active devices by aggregating the lightpaths on the lowest possible number of active fiber links. Routing strategies based on this intuition are beneficial in terms of energy saving, but on the other hand may impact the network performance (e.g., blocking probability) by affecting length of the lightpaths and link occupancy distribution. This trade-off is evaluated in the thesis with the help of a specially designed routing and wavelength assignment (RWA) strategy referred to as weighted power aware lightpath routing (WPA-LR). The WPA-LR strategy permits the fine tuning between the minimization of two objectives: energy consumption and network resource (i.e., wavelength) utilization. Evaluation results confirm that energy efficiency and network performance are conflicting objectives. However, the proposed WPA-LR strategy offers energy minimization with acceptable impact on the network performance. The thesis also investigates the impact that sleep-based energy-efficient strategies have on the lifetime of a number of optical network devices, in both access and core networks. In fact, utilizing a sleep mode functionality may change the operational conditions of the device which can impact the device lifetime. This is a crucial aspect to consider because it may directly affect the network operational cost related to fault management. The thesis provides a methodology to assess under which conditions and for which devices an energy-efficient scheme may lead to overall cost benefit vs. a (possible) increase of reparation cost. It was found that in access networks and with business customers a small lifetime variation in optical line terminals (OLTs) or in optical network units (ONUs) can lead to significant cost increase that cannot be covered by the profits coming from the energy saving. In core networks erbium doped fiber amplifiers (EDFAs) are the most vulnerable devices in terms of impact on their lifetime. For this reason it was found that the usage of green routing algorithms based on putting EDFAs into sleep mode may not always be economically beneficial. In conclusion this thesis provides a different perspective on sleep mode based energy-efficient algorithms where the potential benefit in terms of energy saving is weighted against the impact of a possible degradation of the network performance and devices lifetime. On the other hand these performance degradations can be controlled and limited by the proposed algorithms. / Energikonsumtionen av kommunikationsnätverk, växer kontinuerligt. Många energibesparande åtgärder har föreslagits, såväl på komponentnivå, systemnivå och nätverksnivå. Det mest lovande sättet att hantera energibehov i kommunikationsnätverk är att utnyttja optisk teknologi så mycket som möjligt då denna har potential att ge låg energiförbrukning per bit. Det finns också ett antal föreslagna metoder för att ytterligare reducera energibehovet i optiska nätverk. En av de mest använda teknikerna bygger på att låta enheter som ej används gå ner på låg effekt (”sovläge”). Om detta används i allt för hög utsträckning kan det dock påverka hur optiska förbindelser (sk lightpaths) sätts upp eller ge förändrade egenskaper hos de aktuella komponenterna. Detta kan i sin tur ha en skadlig inverkan på de centrala nätverks- och komponentegenskaper vilket påverkar prestandan. Med andra ord kan en sådan ”grön” ansats baserad på sovläge leda till ökad fördröjning, förändring av resursutnyttjandet i nätet och till och med påverka risken för att det uppstår fel i komponenterna vilket ökar driftskostnaden för nätet. Denna avhandling fokuserar på dessa aspekter och visar upp resultat som belyser avvägningen mellan sovlägesbaserade energieffektiva strategier och deras eventuella bieffekter. Att slå av och väcka upp komponenter i optiska access-nätverk kan vara förknippat med en signifikant extra energikostnad. Tidigare föreslagna energieffektiva strategier försöker reducera denna ökade energikostnad genom att samla så mycket trafik som möjligt innan överföringen sker. Dock kan detta leda till ökad fördröjning som i vissa lägen inte är acceptabel. I avhandlingen undersöker vi avvägningen mellan energibesparingar och ökad paketfördröjning i fallet med LTE distributionsnät baserade på våglängsmultiplexerade passiva optiska nätverk (WDM-PON). Vi föreslår en ny energieffektiv ansats baserad på att enheter försätts i ”slummer-läge”. Detta gör det möjligt att med god precision bestämma när en sändare behöver väckas upp i syfte att maximera tiden i sovläget och att försäkra sig om att paketen kommer fram inom avsedd tid. Strategin är även kapabel att utnyttja differentierad fördröjning för att ytterligare förbättra energibesparingen. Ett sätt att minska energikonsumtionen i optiska distributionsnät är att minimera antalet aktiva enheter genom att exempelvis samla optiska förbindelser till ett minimalt antal aktiva fiberlänkar. Routingstrategier som utgår från denna princip är fördelaktiga ur energisynpunkt men kan å andra sidan skada nätverksprestanda (exempelvis blockeringssannolikhet) genom påverkan på förbindelselängder och annorlunda belastning av länkarna. Denna avvägning utvärderas i avhandlingen med hjälp av en specifikt utformad strategi för routing och våglängstilldelning (RWA) som vi benämner ”viktad effektmedveten optisk förbindelserouting” (WPA-LR). Denna strategi möjliggör noggrann avvägning mellan minimeringen av två kriterier: å ena sidan energikonsumtion, å andra sidan utnyttjandet av nätverksresurser (speciellt väglängdsutnyttjandet). Vår utvärdering bekräftar att energieffektivitet och nätverksprestanda står i motsatsförhållande till varandra. Dock erbjuder WPA-LR strategin minimering av energin med en acceptabel påverkan på nätverksprestanda. Slutligen undersöks i avhandlingen den påverkan som sovlägesbaserade energieffektiva strategier har på livslängden för optiska nätverkskomponenter, både i access- och i distributionsnät. Användning av sovlägesfunktion kan påverka arbetsförhållandena för en komponent, något som i sin tur kan påverka livslängden. Detta är en kritisk aspekt att ta i beaktande då det direkt kan påverka driftskostnaden kopplad till nätunderhållet. En metod ges för att utvärdera under vilka förhållanden och för vilka enheter en energieffektiv strategi kan leda till en total kostnadsfördel jämfört med en (möjlig) ökning av reparationskostnaderna. Ett resultat är att, i accessnät och för företagsanvändare, så kan även en liten variation i feluppkomst i optiska linjeterminaler (OLTs) eller optiska nätverksenheter (ONUs) leda till signifikanta kostnadsförluster vilka inte kan kompenseras genom de vinster som kan åstadkommas med energibesparingar. I distributionsnät är erbium-dopade fiberförstärkare (EDFAs) de mest utsatta enheterna vad gäller inverkan på livslängd. Genom att studera routingstrategier (ex.vis WPA-LR) har vi funnit att användningen av ”gröna” routingalgoritmer baserade på att lägga EDFAs i sovläge inte alltid är ekonomiskt fördelaktigt. Denna avhandling ger ett perspektiv på sovlägesbaserade energieffektiviseringsalgoritmer där de potentiella fördelarna vad gäller minskade driftskostnader ställs mot möjliga försämringar av nätverksprestanda och komponenters livslängd. Å andra sidan kan dessa försämringar hållas under kontroll och begränsas av den föreslagna algoritmen. / La consommation d'énergie des réseaux de communication ne cesse de croître. Ce problème fait l’objet de nombreuses approches orientées vers les économies d'énergie (écoénergétiques) au niveau des appareils (équipements) des systèmes et des réseaux. La façon la plus prometteuse de limiter l’augmentation de consommation évoquée est d'utiliser autant que possible des technologies photoniques, vu leur faible consommation d'énergie par bit. Plusieurs autres approches ont été proposées pour réduire davantage encore la consommation d'énergie dans des réseaux optiques. Une technique populaire exploite les modes de faible puissance (par exemple le mode veille) pour les appareils qui ne sont pas utilisés. Cependant, les approches basées sur le mode de veille peuvent affecter la manière dont les liaisons optiques (circuits optiques) sont acheminées, ou modifier les caractéristiques de certains appareils. Cela peut avoir un impact négatif sur les paramètres de performance des réseaux/équipements cruciaux. En d'autres termes, une approche écoénergétique peut introduire un retard supplémentaire, changer le niveau d'utilisation des ressources dans le réseau, ou même avoir un impact sur le taux d'échec d'un équipement, entraînant une augmentation des coûts d'exploitation du réseau. Cette thèse évalue attentivement, à la fois dans le réseau d'accès mais aussi dans le cœur du réseau, le compromis entre les avantages des régimes économes en énergie utilisant le mode veille et leurs effets secondaires possibles. Dans les réseaux d'accès optiques, mettre un équipement en mode veille et le réactiver peut introduire une surcharge d'énergie significative. Les approches d'économie d'énergie déjà proposées réduisent cette surcharge en regroupant autant que possible le trafic avant sa transmission. Toutefois, les données d'agrégation peuvent provoquer un retard supplémentaire qui peut ne pas être acceptable dans certains cas. Cette thèse étudie le compromis entre les économies d'énergie et un retard supplémentaire des paquets dans le cas d'un réseau backhaul LTE basé sur réseau optique passif à multiplexage en longueur d'onde (WDM-PON). La thèse propose une nouvelle approche éco énergétique. Elle développe un concept au travers duquel il est possible de contrôler avec précision quand un émetteur doit se réactiver, afin de maximiser le temps passé en mode veille tout en veillant à ce que les transmissions de paquets soient terminées en temps voulu. Le schéma proposé est également capable d’exploiter les (éventuelles) exigences diverses de retard de trafic pour améliorer encore les économies d'énergie. Dans le cœur des réseaux optiques, on peut diminuer la consommation d'énergie en minimisant le nombre d’équipements actifs utilisés pour l’acheminement des circuits optiques et le nombre de liens actifs à fibres optiques. Les stratégies de routage basées sur ce principe sont bénéfiques en termes d'économie d'énergie, mais peuvent affecter les performances du réseau (par exemple, la probabilité de blocage) en affectant la longueur des circuits optiques et la distribution d’occupation des liens. Ce compromis est évalué dans la thèse avec l'aide d’une stratégie de routage et affectation de longueur d'onde (RWA) appelée routage des circuits optiques conscient de la puissance (WPA-LR). La stratégie WPA-LR permet le réglage fin entre deux objectifs: minimiser la consommation d'énergie et minimiser l’utilisation des ressources réseau (i.e. longueur d'onde). Les résultats de l'évaluation confirment que l'efficacité énergétique et les performances du réseau ont des objectifs contradictoires. Cependant, la stratégie WPA-LR proposée permet la minimisation de l'énergie avec un impact acceptable sur les performances du réseau. La thèse étudie également l'impact que les stratégies d’économie d’énergie basées sur le mode veille ont sur la durée de vie d'un certain nombre d’équipements de réseau optique, dans les deux réseaux d'accès et de base. L'utilisation du mode veille peut en effet modifier les conditions de fonctionnement de l’équipement, ce qui peut influer sur la durée de vie de l'appareil. Ceci est un aspect crucial à considérer, car il peut affecter directement le coût opérationnel du réseau lié à la gestion des pannes. La thèse propose une méthodologie pour évaluer dans quelles conditions et pour quels dispositifs un système économe en énergie peut conduire à des avantages de coûts globaux par rapport à une (possible) augmentation des coûts de maintenance. Dans les réseaux d'accès et auprès de clients commerciaux, il a été constaté qu’une petite variation de taux d'échec dans les terminaux de ligne optique (OLT) ou dans les unités de terminaison de réseau optique (ONUs) peut conduire à des pertes financières importantes qui ne peuvent être compensées par les bénéfices provenant des économies d'énergie. Dans les cœurs de réseaux les amplificateurs à fibre dopée en erbium (EDFA) sont les équipements les plus vulnérables en termes d'impact sur leur durée de vie. Pour cette raison, l'utilisation d'algorithmes de routage écoénergétiques basé sur la mise en mode veille des EDFA peut par conséquent n’être pas toujours économiquement avantageuse. En conclusion, cette thèse fournit une perspective différente sur des algorithmes économes en énergie basés sur l’utilisation du mode veille. Leur bénéfice potentiel en termes d'économie d'énergie est comparé à l'impact d'une éventuelle dégradation d’une part de la performance du réseau et d’autre part de la durée de vie des équipements. Ces dégradations de performances peuvent être contrôlées et limitées par les algorithmes proposés. / Zużycie energii elektrycznej w sieciach komunikacyjnych stale rośnie. Do tej pory zostało zaproponowanych wiele metod oszczędzania energii na poziomie urządzeń, systemów i sieci. Najbardziej obiecującym podejściem do tego problemu jest wykorzystanie technologii optycznych, z uwagi na ich niskie zużycie energii „per bit”. Ponadto wiele różnych metod przeznaczonych dla sieci optycznych zostało przedstawionych w literaturze. Jedna z popularnych technik wykorzystuje tryb niskiego poboru energii (uśpienia) w urządzeniach, które nie są używane. Jednakże techniki wykorzystujące tryb uśpienia mogą mieć wpływ na kierowanie optycznych połączeń sieciowych (lightpaths) lub zmieniać właściwości urządzeń. Natomiast to może mieć negatywny wpływ na kluczowe parametry wydajności sieci czy urządzeń sieciowych. Innymi słowy algorytmy oszczędzające energię mogą wprowadzić dodatkowe opóźnienia, zmienić wykorzystanie zasobów sieciowych, a nawet wpływać na awaryjność urządzeń zwiekszając tym samym koszt eksploatacji sieci. Praca ta przedstawia i analizuje kompromis pomiędzy korzyściami płynącymi z energooszczędnych algorytmów opartych na trybie uśpienia, a ich ewentualnymi skutkami ubocznymi, zarówno w sieciach dostępowych, jak i szkieletowych. W przypadku optycznych sieci dostępowych proces wprowadzenia urządzenia w tryb uśpienia i jego wybudzenia może spowodować znaczący narzut energetyczny. Proponowane sposoby zmniejszenia tego narzutu agregują ruch sieciowy przed jego transmisją, Jednakże taka agregacja powoduje dodatkowe opóźnienia transmisji, które w niektórych przypadkach mogą być niedopuszczalne. Praca ta analizuje kompromis pomiędzy oszczędzaniem energii, a dodatkowymi opóźnieniami transmisji w przypadku sieci LTE-backhaul, bazowanej na technologii pasywnych sieci optycznych, opartych na multipleksowaniu z podziałem długości fali WDM-PON (Wavelength Division Multiplexing Passive Optical Network). Niniejsza praca proponuje nowatorską metodę oszczędzania energii, opartą na koncepcji drzemki (dozing), która precyzyjnie kontroluje czas wybudzania nadajnika, tak aby zmaksymalizować czas spędzony w trybie drzemki, przy zapewnieniu, że transmisja danych zostanie zakończona przed upływem wymaganego czasu. Proponowana metoda wykorzystuje również zróżnicowane wymagania maksymalnych opóźnień transmitowanych danych do dalszej poprawy wydajności energetycznej. Jednym ze sposobów zmniejszania zużycia energii w światłowodowych sieciach szkieletowych jest zredukowanie liczby aktywnych urządzeń, poprzez umiejętne kierowanie optycznych połączeń sieciowych przy użyciu już aktywnych łączy światłowodowych. Kierowanie ruchu sieciowego oparte na tym pomyśle jest korzystne z punktu widzenia oszczędzania energii, choć z drugiej strony może mieć wpływ na parametry wydajnościowe sieci (np. zwiększenie prawdopodobieństwa blokady połączeń) poprzez oddziaływanie na długość połączeń, czy zajętość łączy. Przytoczony problem jest analizowany w tej pracy za pomocą specjalnie zaprojektowanego algorytmu routingu i przypisania długości fali RWA (Routing and Wavelength Assignement), nazwanego WPA-LR (Weighted Power Aware Lightpath Routing). Algorytm WPA-LR pozwala na precyzyjną regulację pomiędzy redukcją zużycia energii i optymalizacją wykorzystania zasobów sieciowych. Wyniki wykonanej analizy problemu potwierdzają, że efektywność energetyczna i wydajność sieci to cele ze sobą sprzeczne. Jednakże proponowana strategia (WPA-LR) umożliwia kontrolę i osiągnięcie kompromisu pomiędzy zmniejszeniem zużycia energii, a pogorszeniem wydajności sieci. Praca ta bada również wpływ energooszczędnych strategii, opartych o tryb uśpienia, na trwałość optycznych urządzeń sieciowych, zarówno w sieciach dostępowych, jak i szkieletowych. Używanie trybu uśpienia może zmienić warunki pracy urządzenia, które z kolei mogą mieć wpływ na jego trwałość. Natomiast zmniejszenie trwałości urządzenia może bezpośrednio oddziaływać na koszt eksploatacji sieci związany z zarządzaniem awariami. Niniejsza praca proponuje metodologię oceny, na jakich warunkach i w przypadku których urządzeń, używanie algorytmów oszczędzania energii może prowadzić do ogólnych korzyści finansowych lub strat związanych ze wzrostem kosztu eksploatacji sieci. W pracy stwierdzono, że w sieciach dostępowych, w szczególności obsługujących klientów biznesowych, mały wpływ na awaryjność optycznych terminali ONU (Optical Network Unit) lub optycznych urządzeń dystrybucyjnych OLT (Optical Line Terminal) może prowadzić do znacznego zwiększenia kosztów, które mogą przekroczyć zyski związane z oszczędzaniem energii. W sieciach szkieletowych wzmacniacze światłowodowe EDFA (Erbium Doped Fiber Amplifier) są najbardziej wrażliwymi urządzeniami pod względem wpływu na ich awaryjność. W pracy dowiedziono, że użycie energooszczędnych algorytmów kierowania połączeń światłowodowych, opartych na wprowadzaniu EDFA w tryb uśpienia, nie zawsze jest korzystne ekonomicznie. Niniejsza praca przedstawia nowatorskie spojrzenie na energooszczędne algorytmy oparte na wprowadzaniu urządzeń w tryb uśpienia, gdzie potencjalne korzyści w zakresie oszczędzania energii są porównane ze stratami związanymi z degradacją wydajności sieci lub żywotności urządzeń sieciowych. / <p>QC 20160509</p>

Ce texte établit le bilan des principaux résultats de recherches anthropologiques effectuées sur deux terrains très différents, mais avec les mêmes méthodes : les Toubou, pasteurs nomades de zone désertique (Tchad, Niger), et les Rwa, caféiculteurs du mont Meru en Tanzanie du Nord.

Föreliggande uppsats är en studie om ämneslärarstudenters potentiella böjelse för auktoritarianism vid ämneslärarprogrammet på Mälardalens högskola i syfte att undersöka hur auktoritarianismen kan te sig i skol- och utbildningssammanhang. En böjelse för auktoritarianism kännetecknas av tre egenskaper: viljan att lyda en auktoritets order, aggressivitet mot de som inte underkastar sig auktoriteten och uppfattningen om att alla ska följa den auktoritära ordningens normer och lagar. För att undersöka detta har ett beprövat mätinstrument (Right-Wing Authoritarianism scale) ämnat att mäta förekomsten av sådan böjelse bland olika grupper via ett frågeformulär. Studiens resultat visade att ämneslärarstudenterna inte skiljde sig från en kontrollgrupp bestående av andra studenter vid Mälardalens högskola i böjelse för auktoritarianism. Varken ämneslärarstudenternas ämneskombinationer, avklarade verksamhetsförlagda utbildningar eller terminer vid programmet hade en effekt på deras böjelse för auktoritarianism. Däremot hade åldern en signifikant effekt på sagd böjelse: De som var i åldrarna 19-25 hade en högre grad av böjelse jämfört med de som var 30 år eller äldre. Dessutom korrelerade högre grad av böjelse för auktoritarianism med en negativ attityd till genuspedagogik, positiv attityd till användandet av disciplinära åtgärder i skolan och en positiv attityd till betyg i ordning och uppförande. Resultatet diskuteras i relation till forskning och litteratur om skolans utveckling under 2000talet.