Accelerator-driven systems for transmutation of nuclear waste have been suggested as a means for dealing with spent fuel components that pose potential radiological hazard for long periods of time. While not entirely removing the need for underground waste repositories, this nuclear waste incineration technology provides a viable method for reducing both waste volumes and storage times. Potentially, the time spans could be diminished from hundreds of thousand years to merely 1.000 years or even less. A central aspect for accelerator-driven systems design is the prediction of safety parameters and fuel economy. The simulations performed rely heavily on nuclear data and especially on the precision of the neutron cross section representations of essential nuclides over a wide energy range, from the thermal to the fast energy regime. In combination with a more demanding neutron flux distribution as compared with ordinary light-water reactors, the expanded nuclear data energy regime makes exploration of the cross section sensitivity for simulations of accelerator-driven systems a necessity. This fact was observed throughout the work and a significant portion of the study is devoted to investigations of nuclear data related effects. The computer code package EA-MC, based on 3-D Monte Carlo techniques, is the main computational tool employed for the analyses presented. Directly related to the development of the code is the extensive IAEA ADS Benchmark 3.2, and an account of the results of the benchmark exercises as implemented with EA-MC is given. CERN's Energy Amplifier prototype is studied from the perspectives of neutron source types, nuclear data sensitivity and transmutation. The commissioning of the n_TOF experiment, which is a neutron cross section measurement project at CERN, is also described.

A formal framework is developed and implemented in this research for preliminary rotorcraft design using IPPD methodology. All the technical aspects of design are considered including the vehicle engineering, dynamic analysis, stability and control, aerodynamic performance, propulsion, transmission design, weight and balance, noise analysis and economic analysis. The design loop starts with a detailed analysis of requirements. A baseline is selected and upgrade targets are identified depending on the mission requirements. An Overall Evaluation Criterion (OEC) is developed that is used to measure the goodness of the design or to compare the design with competitors. The requirements analysis and baseline upgrade targets lead to the initial sizing and performance estimation of the new design. The digital information is then passed to disciplinary experts. This is where the detailed disciplinary analyses are performed. Information is transferred from one discipline to another as the design loop is iterated. To coordinate all the disciplines in the product development cycle, Multidisciplinary Design Optimization (MDO) techniques e.g. All At Once (AAO) and Collaborative Optimization (CO) are suggested. The methodology is implemented on a Light Turbine Training Helicopter (LTTH) design. Detailed disciplinary analyses are integrated through a common platform for efficient and centralized transfer of design information from one discipline to another in a collaborative manner. Several disciplinary and system level optimization problems are solved. After all the constraints of a multidisciplinary problem have been satisfied and an optimal design has been obtained, it is compared with the initial baseline, using the earlier developed OEC, to measure the level of improvement achieved. Finally a digital preliminary design is proposed. The proposed design methodology provides an automated design framework, facilitates parallel design by removing disciplinary interdependency, current and updated information is made available to all disciplines at all times of the design through a central collaborative repository, overall design time is reduced and an optimized design is achieved.

許多公司在發行公司債的時候，會給此公司債一個可提前贖回的特性，此種公司債稱為可贖回公司債(Callable Bond)，用來規避利率變動風險的金融商品也與我們熟知的利率交換不同，稱為可取消利率交換(Cancelable Swap)。其實可取消利率交換可以拆解成百慕達利率交換選擇權(Bermudan Swaption)加上利率交換，由於利率交換之評價較簡單也有市場一致的評價方法，因此百慕達利率交換選擇權便成為評價的重點。 評價的部分，由於百慕達式的商品有提前履約的特性，造成其封閉解不存在，因此需要利用其他的近似解或是數值方法來求它的價格。由於本文採用BGM(1997)的市場利率模型(Libor Market Model)，其高維度的性質導致數狀方法與有限差分法使用起來較無效率，因此本文選擇使用蒙地卡羅法做為評價的方法，同時利用Longstaff and Schwartz(2001)的最小平方蒙地卡羅法(Least Squares Monte Carlo Method)來解決提前履約的問題。 最後，本文將採用2種利率波動度假設與2種不同利率間相關係數的假設，共4種組合，在歐式利率交換選擇權的市場波動度下進行校準，使用校準出來的參數進行評價來得到4種價格。再進行商品的敏感度分析(Sensitivity Analysis)和風險值(Value at Risk)的計算。

Extensive deforestations, particularly in the (sub)tropics, have led to intense soil degradation and erosion with concomitant reduction in soil fertility. Reforestations or plantations on those degraded sites may provide effective measures to mitigate further soil degradation and erosion, and can lead to improved soil quality. However, a change in land use from, e.g., grassland to forest may have a crucial impact on water balance. This may affect water availability even under humid tropical climate conditions where water is normally not a limiting factor. In this context, it should also be considered that according to climate change projections rainfall may decrease in some of these regions. To mitigate climate change related problems (e.g. increases in erosion and drought), reforestations are often carried out. Unfortunately, those measures are seldom completely successful, because the environmental conditions and the plant specific requirements are not appropriately taken into account. This is often due to data-scarcity and limited financial resources in tropical regions. For this reason, innovative approaches are required that are able to measure environmental conditions quasi-continuously in a cost-effective manner. Simultaneously, reforestation measures should be accompanied by monitoring in order to evaluate reforestation success and to mitigate, or at least to reduce, potential problems associated with reforestation (e.g. water scarcity). To avoid reforestation failure and negative implications on ecosystem services, it is crucial to get insights into the water balance of the actual ecosystem, and potential changes resulting from reforestation. The identification and prediction of water balance changes as a result of reforestation under climate change requires the consideration of the complex feedback system of processes in the soil-vegetation-atmosphere continuum. Models that account for those feedback system are Soil-Vegetation-Atmosphere-Transfer (SVAT) models. For the before-mentioned reasons, this study targeted two main objectives: (i) to develop and test a method combination for site evaluation under data scarcity (i.e. study requirements) (Part I) and (ii) to investigate the consequences of prediction uncertainty of the SVAT model input parameters, which were derived using geophysical methods, on SVAT modeling (Part II). A water balance modeling approach was set at the center of the site evaluation approach. This study used the one-dimensional CoupModel, which is a SVAT model. CoupModel requires detailed spatial soil information for (i) model parameterization, (ii) upscaling of model results and accounting for local to regional-scale soil heterogeneity, and (iii) monitoring of changes in soil properties and plant characteristics over time. Since traditional approaches to soil and vegetation sampling and monitoring are time consuming and expensive (and therefore often limited to point information), geophysical methods were used to overcome this spatial limitation. For this reason, vis-NIR spectroscopy (visible to near-infrared wavelength range) was applied for the measurement of soil properties (physical and chemical), and remote sensing to derive vegetation characteristics (i.e. leaf area index (LAI)). Since the estimated soil properties (mainly texture) could be used to parameterize a SVAT model, this study investigated the whole processing chain and related prediction uncertainty of soil texture and LAI, and their impact on CoupModel water balance prediction uncertainty. A greenhouse experiment with bamboo plants was carried out to determine plant-physiological characteristics needed for CoupModel parameterization. Geoelectrics was used to investigate soil layering, with the intent of determining site-representative soil profiles for model parameterization. Soil structure was investigated using image analysis techniques that allow the quantitative assessment and comparability of structural features. In order to meet the requirements of the selected study approach, the developed methodology was applied and tested for a site in NE-Brazil (which has low data availability) with a bamboo plantation as the test site and a secondary forest as the reference (reference site). Nevertheless, the objective of the thesis was not the concrete modeling of the case study site, but rather the evaluation of the suitability of the selected methods to evaluate sites for reforestations and to monitor their influence on the water balance as well as soil properties. The results (Part III) highlight that one needs to be aware of the measurement uncertainty related to SVAT model input parameters, so for instance the uncertainty of model input parameters such as soil texture and leaf area index influences meaningfully the simulated model water balance output. Furthermore, this work indicates that vis-NIR spectroscopy is a fast and cost-efficient method for soil measurement, mapping, and monitoring of soil physical (texture) and chemical (N, TOC, TIC, TC) properties, where the quality of soil prediction depends on the instrument (e.g. sensor resolution), the sample properties (i.e. chemistry), and the site characteristics (i.e. climate). Additionally, also the sensitivity of the CoupModel with respect to texture prediction uncertainty with respect to surface runoff, transpiration, evaporation, evapotranspiration, and soil water content depends on site conditions (i.e. climate and soil type). For this reason, it is recommended that SVAT model sensitivity analysis be carried out prior to field spectroscopic measurements to account for site specific climate and soil conditions. Nevertheless, mapping of the soil properties estimated via spectroscopy using kriging resulted in poor interpolation (i.e. weak variograms) results as a consequence of a summation of uncertainty arising from the method of field measurement to mapping (i.e. spectroscopic soil prediction, kriging error) and site-specific ‘small-scale’ heterogeneity. The selected soil evaluation method (vis-NIR spectroscopy, structure comparison using image analysis, traditional laboratory analysis) showed that there are significant differences between the bamboo soil and the adjacent secondary forest soil established on the same soil type (Vertisol). Reflecting on the major study results, it can be stated that the selected method combination is a way forward to a more detailed and efficient way to evaluate the suitability of a specific site for reforestation. The results of this study provide insights into where and when during soil and vegetation measurements a high measurement accuracy is required to minimize uncertainties in SVAT modeling. / Umfangreiche Abholzungen, besonders in den (Sub-)Tropen, habe zu intensiver Bodendegradierung und Erosion mit einhergehendem Verlust der Bodenfruchtbarkeit geführt. Eine wirksame Maßnahme zur Vermeidung fortschreitender Bodendegradierung und Erosion sind Aufforstungen auf diesen Flächen, die bisweilen zu einer verbesserten Bodenqualität führen können. Eine Umwandlung von Grünland zu Wald kann jedoch einen entscheidenden Einfluss auf den Wasserhaushalt haben. Selbst unter humid-tropischen Klimabedingungen, wo Wasser in der Regel kein begrenzender Faktor ist, können sich Aufforstungen negativ auf die Wasserverfügbarkeit auswirken. In diesem Zusammenhang muss auch berücksichtigt werden, dass Klimamodelle eine Abnahme der Niederschläge in einigen dieser Regionen prognostizieren. Um die Probleme, die mit dem Klimawandel in Verbindung stehen zu mildern (z.B. Zunahme von Erosion und Dürreperioden), wurden und werden bereits umfangreiche Aufforstungsmaßnahmen durchgeführt. Viele dieser Maßnahmen waren nicht immer umfassend erfolgreich, weil die Umgebungsbedingungen sowie die pflanzenspezifischen Anforderungen nicht angemessen berücksichtigt wurden. Dies liegt häufig an der schlechten Datengrundlage sowie an den in vielen Entwicklungs- und Schwellenländern begrenzter verfügbarer finanzieller Mittel. Aus diesem Grund werden innovative Ansätze benötigt, die in der Lage sind quasi-kontinuierlich und kostengünstig die Standortbedingungen zu erfassen und zu bewerten. Gleichzeitig sollte eine Überwachung der Wiederaufforstungsmaßnahme erfolgen, um deren Erfolg zu bewerten und potentielle negative Effekte (z.B. Wasserknappheit) zu erkennen und diesen entgegenzuwirken bzw. reduzieren zu können. Um zu vermeiden, dass Wiederaufforstungen fehlschlagen oder negative Auswirkungen auf die Ökosystemdienstleistungen haben, ist es entscheidend, Kenntnisse vom tatsächlichen Wasserhaushalt des Ökosystems zu erhalten und Änderungen des Wasserhaushalts durch Wiederaufforstungen vorhersagen zu können. Die Ermittlung und Vorhersage von Wasserhaushaltsänderungen infolge einer Aufforstung unter Berücksichtigung des Klimawandels erfordert die Berücksichtigung komplex-verzahnter Rückkopplungsprozesse im Boden-Vegetations-Atmosphären Kontinuum. Hydrologische Modelle, die explizit den Einfluss der Vegetation auf den Wasserhaushalt untersuchen sind Soil-Vegetation-Atmosphere-Transfer (SVAT) Modelle. Die vorliegende Studie verfolgte zwei Hauptziele: (i) die Entwicklung und Erprobung einer Methodenkombination zur Standortbewertung unter Datenknappheit (d.h. Grundanforderung des Ansatzes) (Teil I) und (ii) die Untersuchung des Einflusses der mit geophysikalischen Methoden vorhergesagten SVAT-Modeleingangsparameter (d.h. Vorhersageunsicherheiten) auf die Modellierung (Teil II). Eine Wasserhaushaltsmodellierung wurde in den Mittelpunkt der Methodenkombination gesetzt. In dieser Studie wurde das 1D SVAT Model CoupModel verwendet. CoupModel benötigen detaillierte räumliche Bodeninformationen (i) zur Modellparametrisierung, (ii) zum Hochskalierung von Modellergebnissen unter Berücksichtigung lokaler und regionaler Bodenheterogenität, und (iii) zur Beobachtung (Monitoring) der zeitlichen Veränderungen des Bodens und der Vegetation. Traditionelle Ansätze zur Messung von Boden- und Vegetationseigenschaften und deren Monitoring sind jedoch zeitaufwendig, teuer und beschränken sich daher oft auf Punktinformationen. Ein vielversprechender Ansatz zur Überwindung der räumlichen Einschränkung sind die Nutzung geophysikalischer Methoden. Aus diesem Grund wurden vis-NIR Spektroskopie (sichtbarer bis nah-infraroter Wellenlängenbereich) zur quasi-kontinuierlichen Messung von physikalischer und chemischer Bodeneigenschaften und Satelliten-basierte Fernerkundung zur Ableitung von Vegetationscharakteristika (d.h. Blattflächenindex (BFI)) eingesetzt. Da die mit geophysikalisch hergeleiteten Bodenparameter (hier Bodenart) und Pflanzenparameter zur Parametrisierung eines SVAT Models verwendet werden können, wurde die gesamte Prozessierungskette und die damit verbundenen Unsicherheiten und deren potentiellen Auswirkungen auf die Wasserhaushaltsmodellierung mit CoupModel untersucht. Ein Gewächshausexperiment mit Bambuspflanzen wurde durchgeführt, um die zur CoupModel Parametrisierung notwendigen pflanzenphysio- logischen Parameter zu bestimmen. Geoelektrik wurde eingesetzt, um die Bodenschichtung der Untersuchungsfläche zu untersuchen und ein repräsentatives Bodenprofil zur Modellierung zu definieren. Die Bodenstruktur wurde unter Verwendung einer Bildanalysetechnik ausgewertet, die die qualitativen Bewertung und Vergleichbarkeit struktureller Merkmale ermöglicht. Um den Anforderungen des gewählten Standortbewertungsansatzes gerecht zu werden, wurde die Methodik auf einem Standort mit einer Bambusplantage und einem Sekundärregenwald (als Referenzfläche) in NO-Brasilien (d.h. geringe Datenverfügbarkeit) entwickelt und getestet. Das Ziel dieser Arbeit war jedoch nicht die Modellierung dieses konkreten Standortes, sondern die Bewertung der Eignung des gewählten Methodenansatzes zur Standortbewertung für Aufforstungen und deren zeitliche Beobachtung, als auch die Bewertung des Einfluss von Aufforstungen auf den Wasserhaushalt und die Bodenqualität. Die Ergebnisse (Teil III) verdeutlichen, dass es notwendig ist, sich den potentiellen Einfluss der Messunsicherheiten der SVAT Modelleingangsparameter auf die Modellierung bewusst zu sein. Beispielsweise zeigte sich, dass die Vorhersageunsicherheiten der Bodentextur und des BFI einen bedeutenden Einfluss auf die Wasserhaushaltsmodellierung mit CoupModel hatte. Die Arbeit zeigt weiterhin, dass vis-NIR Spektroskopie zur schnellen und kostengünstigen Messung, Kartierung und Überwachung boden-physikalischer (Bodenart) und -chemischer (N, TOC, TIC, TC) Eigenschaften geeignet ist. Die Qualität der Bodenvorhersage hängt vom Instrument (z.B. Sensorauflösung), den Probeneigenschaften (z.B. chemische Zusammensetzung) und den Standortmerkmalen (z.B. Klima) ab. Die Sensitivitätsanalyse mit CoupModel zeigte, dass der Einfluss der spektralen Bodenartvorhersageunsicherheiten auf den mit CoupModel simulierten Oberflächenabfluss, Evaporation, Transpiration und Evapotranspiration ebenfalls von den Standortbedingungen (z.B. Klima, Bodentyp) abhängt. Aus diesem Grund wird empfohlen eine SVAT Model Sensitivitätsanalyse vor der spektroskopischen Feldmessung von Bodenparametern durchzuführen, um die Standort-spezifischen Boden- und Klimabedingungen angemessen zu berücksichtigen. Die Anfertigung einer Bodenkarte unter Verwendung von Kriging führte zu schlechten Interpolationsergebnissen in Folge der Aufsummierung von Mess- und Schätzunsicherheiten (d.h. bei spektroskopischer Feldmessung, Kriging-Fehler) und der kleinskaligen Bodenheterogenität. Anhand des gewählten Bodenbewertungsansatzes (vis-NIR Spektroskopie, Strukturvergleich mit Bildanalysetechnik, traditionelle Laboranalysen) konnte gezeigt werden, dass es bei gleichem Bodentyp (Vertisol) signifikante Unterschiede zwischen den Böden unter Bambus und Sekundärwald gibt. Anhand der wichtigsten Ergebnisse kann festgehalten werden, dass die gewählte Methodenkombination zur detailreicheren und effizienteren Standortuntersuchung und -bewertung für Aufforstungen beitragen kann. Die Ergebnisse dieser Studie geben einen Einblick darauf, wo und wann bei Boden- und Vegetationsmessungen eine besonders hohe Messgenauigkeit erforderlich ist, um Unsicherheiten bei der SVAT Modellierung zu minimieren. / Extensos desmatamentos que estão sendo feitos especialmente nos trópicos e sub-trópicos resultam em uma intensa degradação do solo e num aumento da erosão gerando assim uma redução na sua fertilidade. Reflorestamentos ou plantações nestas áreas degradadas podem ser medidas eficazes para atenuar esses problemas e levar a uma melhoria da qualidade do mesmo. No entanto, uma mudança no uso da terra, por exemplo de pastagem para floresta pode ter um impacto crucial no balanço hídrico e isso pode afetar a disponibilidade de água, mesmo sob condições de clima tropical úmido, onde a água normalmente não é um fator limitante. Devemos levar também em consideração que de acordo com projeções de mudanças climáticas, as precipitações em algumas dessas regiões também diminuirão agravando assim, ainda mais o quadro apresentado. Para mitigar esses problemas relacionados com as alterações climáticas, reflorestamentos são frequentemente realizados mas raramente são bem-sucedidos, pois condições ambientais como os requisitos específicos de cada espécie de planta, não são devidamente levados em consideração. Isso é muitas vezes devido, não só pela falta de dados, como também por recursos financeiros limitados, que são problemas comuns em regiões tropicais. Por esses motivos, são necessárias abordagens inovadoras que devam ser capazes de medir as condições ambientais quase continuamente e de maneira rentável. Simultaneamente com o reflorestamento, deve ser feita uma monitoração a fim de avaliar o sucesso da atividade e para prevenir, ou pelo menos, reduzir os problemas potenciais associados com o mesmo (por exemplo, a escassez de água). Para se evitar falhas e reduzir implicações negativas sobre os ecossistemas, é crucial obter percepções sobre o real balanço hídrico e as mudanças que seriam geradas por esse reflorestamento. Por este motivo, esta tese teve como objetivo desenvolver e testar uma combinação de métodos para avaliação de áreas adequadas para reflorestamento. Com esse intuito, foi colocada no centro da abordagem de avaliação a modelagem do balanço hídrico local, que permite a identificação e estimação de possíveis alterações causadas pelo reflorestamento sob mudança climática considerando o sistema complexo de realimentação e a interação de processos do continuum solo-vegetação-atmosfera. Esses modelos hidrológicos que investigam explicitamente a influência da vegetação no equilíbrio da água são conhecidos como modelos Solo-Vegetação-Atmosfera (SVAT). Esta pesquisa focou em dois objetivos principais: (i) desenvolvimento e teste de uma combinação de métodos para avaliação de áreas que sofrem com a escassez de dados (pré-requisito do estudo) (Parte I), e (ii) a investigação das consequências da incerteza nos parâmetros de entrada do modelo SVAT, provenientes de dados geofísicos, para modelagem hídrica (Parte II). A fim de satisfazer esses objetivos, o estudo foi feito no nordeste brasileiro,por representar uma área de grande escassez de dados, utilizando como base uma plantação de bambu e uma área de floresta secundária. Uma modelagem do balanço hídrico foi disposta no centro da metodologia para a avaliação de áreas. Este estudo utilizou o CoupModel que é um modelo SVAT unidimensional e que requer informações espaciais detalhadas do solo para (i) a parametrização do modelo, (ii) aumento da escala dos resultados da modelagem, considerando a heterogeneidade do solo de escala local para regional e (iii) o monitoramento de mudanças nas propriedades do solo e características da vegetação ao longo do tempo. Entretanto, as abordagens tradicionais para amostragem de solo e de vegetação e o monitoramento são demorados e caros e portanto muitas vezes limitadas a informações pontuais. Por esta razão, métodos geofísicos como a espectroscopia visível e infravermelho próximo (vis-NIR) e sensoriamento remoto foram utilizados respectivamente para a medição de propriedades físicas e químicas do solo e para derivar as características da vegetação baseado no índice da área foliar (IAF). Como as propriedades estimadas de solo (principalmente a textura) poderiam ser usadas para parametrizar um modelo SVAT, este estudo investigou toda a cadeia de processamento e as incertezas de previsão relacionadas à textura de solo e ao IAF. Além disso explorou o impacto destas incertezas criadas sobre a previsão do balanço hídrico simulado por CoupModel. O método geoelétrico foi aplicado para investigar a estratificação do solo visando a determinação de um perfil representante. Já a sua estrutura foi explorada usando uma técnica de análise de imagens que permitiu a avaliação quantitativa e a comparabilidade dos aspectos estruturais. Um experimento realizado em uma estufa com plantas de bambu (Bambusa vulgaris) foi criado a fim de determinar as caraterísticas fisiológicas desta espécie que posteriormente seriam utilizadas como parâmetros para o CoupModel. Os resultados do estudo (Parte III) destacam que é preciso estar consciente das incertezas relacionadas à medição de parâmetros de entrada do modelo SVAT. A incerteza presente em alguns parâmetros de entrada como por exemplo, textura de solo e o IAF influencia significantemente a modelagem do balanço hídrico. Mesmo assim, esta pesquisa indica que vis-NIR espectroscopia é um método rápido e economicamente viável para medir, mapear e monitorar as propriedades físicas (textura) e químicas (N, TOC, TIC, TC) do solo. A precisão da previsão dessas propriedades depende do tipo de instrumento (por exemplo da resolução do sensor), da propriedade da amostra (a composição química por exemplo) e das características das condições climáticas da área. Os resultados apontam também que a sensitividade do CoupModel à incerteza da previsão da textura de solo em respeito ao escoamento superficial, transpiração, evaporação, evapotranspiração e ao conteúdo de água no solo depende das condições gerais da área (por exemplo condições climáticas e tipo de solo). Por isso, é recomendado realizar uma análise de sensitividade do modelo SVAT prior a medição espectral do solo no campo, para poder considerar adequadamente as condições especificas do área em relação ao clima e ao solo. Além disso, o mapeamento de propriedades de solo previstas pela espectroscopia usando o kriging, resultou em interpolações de baixa qualidade (variogramas fracos) como consequência da acumulação de incertezas surgidas desde a medição no campo até o seu mapeamento (ou seja, previsão do solo via espectroscopia, erro do kriging) e heterogeneidade especifica de uma pequena escala. Osmétodos selecionados para avaliação das áreas (vis-NIR espectroscopia, comparação da estrutura de solo por meio de análise de imagens, análise de laboratório tradicionais) revelou a existência de diferenças significativas entre o solo sob bambu e o sob floresta secundária, apesar de ambas terem sido estabelecidas no mesmo tipo de solo (vertissolo). Refletindo sobre os principais resultados do estudo, pode-se afirmar que a combinação dos métodos escolhidos e aplicados representam uma forma mais detalhada e eficaz de avaliar se uma determinada área é adequada para ser reflorestada. Os resultados apresentados fornecem percepções sobre onde e quando, durante a medição do solo e da vegetação, é necessário se ter uma precisão mais alta a fim de minimizar incertezas potenciais na modelagem com o modelo SVAT.

No description available.

L'hétérogénéité de réponses dans un groupe de patients soumis à un même régime thérapeutique doit être réduite au cours d'un traitement ou d'un essai clinique. Deux approches sont habituellement utilisées pour atteindre cet objectif. L'une vise essentiellement à construire une observance active. Cette approche se veut interactive et fondée sur l'échange ``médecin-patient '', ``pharmacien-patient'' ou ``vétérinaire-éleveurs''. L'autre plutôt passive et basée sur les caractéristiques du médicament, vise à contrôler en amont cette irrégularité. L'objectif principal de cette thèse était de développer de nouvelles stratégies d'évaluation et de contrôle de l'impact de l'irrégularité de la prise du médicament sur l'issue thérapeutique. Plus spécifiquement, le premier volet de cette recherche consistait à proposer des algorithmes mathématiques permettant d'estimer efficacement l'effet des médicaments dans un contexte de variabilité interindividuelle de profils pharmacocinétiques (PK). Cette nouvelle méthode est fondée sur l'utilisation concommitante de données \textit{in vitro} et \textit{in vivo}. Il s'agit de quantifier l'efficience ( c-à-dire efficacité plus fluctuation de concentrations \textit{in vivo}) de chaque profil PK en incorporant dans les modèles actuels d'estimation de l'efficacité \textit{in vivo}, la fonction qui relie la concentration du médicament de façon \textit{in vitro} à l'effet pharmacodynamique. Comparativement aux approches traditionnelles, cette combinaison de fonction capte de manière explicite la fluctuation des concentrations plasmatiques \textit{in vivo} due à la fonction dynamique de prise médicamenteuse. De plus, elle soulève, à travers quelques exemples, des questions sur la pertinence de l'utilisation des indices statiques traditionnels ($C_{max}$, $AUC$, etc.) d'efficacité comme outil de contrôle de l'antibiorésistance. Le deuxième volet de ce travail de doctorat était d'estimer les meilleurs temps d'échantillonnage sanguin dans une thérapie collective initiée chez les porcs. Pour ce faire, nous avons développé un modèle du comportement alimentaire collectif qui a été par la suite couplé à un modèle classique PK. À l'aide de ce modèle combiné, il a été possible de générer un profil PK typique à chaque stratégie alimentaire particulière. Les données ainsi générées, ont été utilisées pour estimer les temps d'échantillonnage appropriés afin de réduire les incertitudes dues à l'irrégularité de la prise médicamenteuse dans l'estimation des paramètres PK et PD . Parmi les algorithmes proposés à cet effet, la méthode des médianes semble donner des temps d'échantillonnage convenables à la fois pour l'employé et pour les animaux. Enfin, le dernier volet du projet de recherche a consisté à proposer une approche rationnelle de caractérisation et de classification des médicaments selon leur capacité à tolérer des oublis sporadiques. Méthodologiquement, nous avons, à travers une analyse globale de sensibilité, quantifié la corrélation entre les paramètres PK/PD d'un médicament et l'effet d'irrégularité de la prise médicamenteuse. Cette approche a consisté à évaluer de façon concomitante l'influence de tous les paramètres PK/PD et à prendre en compte, par la même occasion, les relations complexes pouvant exister entre ces différents paramètres. Cette étude a été réalisée pour les inhibiteurs calciques qui sont des antihypertenseurs agissant selon un modèle indirect d'effet. En prenant en compte les valeurs des corrélations ainsi calculées, nous avons estimé et proposé un indice comparatif propre à chaque médicament. Cet indice est apte à caractériser et à classer les médicaments agissant par un même mécanisme pharmacodynamique en terme d'indulgence à des oublis de prises médicamenteuses. Il a été appliqué à quatre inhibiteurs calciques. Les résultats obtenus étaient en accord avec les données expérimentales, traduisant ainsi la pertinence et la robustesse de cette nouvelle approche. Les stratégies développées dans ce projet de doctorat sont essentiellement fondées sur l'analyse des relations complexes entre l'histoire de la prise médicamenteuse, la pharmacocinétique et la pharmacodynamique. De cette analyse, elles sont capables d'évaluer et de contrôler l'impact de l'irrégularité de la prise médicamenteuse avec une précision acceptable. De façon générale, les algorithmes qui sous-tendent ces démarches constitueront sans aucun doute, des outils efficients dans le suivi et le traitement des patients. En outre, ils contribueront à contrôler les effets néfastes de la non-observance au traitement par la mise au point de médicaments indulgents aux oublis / The heterogeneity of PK and/or PD profiles in patients undergoing the same treatment regimen should be avoided during treatment or clinical trials. Two traditional approaches are continually used to achieve this purpose. One builds on the interactive synergy between the health caregiver and the patient to exert the patients to become a whole part of his own compliance. Another attempt is to develop drugs or drug dosing regimens that forgive the poor compliance. The main objective of this thesis was to develop new methodologies for assessing and monitoring the impact of irregular drug intake on the therapeutic outcome. Specifically, the first phase of this research was to develop algorithms for evaluation of the efficacy of a treatment by improving classical breakpoint estimation methods to the situation of variable drug disposition. This method introduces the ``efficiency'' of a PK profile by using the efficacy function as a weight in the area under curve ($AUC$) formula. It gives a more powerful PK/PD link and reveales, through some examples, interesting issues about uniqueness of therapeutic outcome indices and antibiotic resistance problems. The second part of this thesis was to determine the optimal sampling times by accounting for the intervariability in drug disposition in collectively treated pigs. For this, we have developed an advanced mathematical model able to generate different PK profiles for various feed strategies. Three algorithms have been performed to identify the optimal sampling times with the criteria of minimizing the PK intervariability . The median-based method yielded suitable sampling periods in terms of convenience for farm staff and animal welfare. The last part of our research was to establish a rational way to delineate drugs in terms of their ``forgiveness'', based on drugs PK/PD properties. For this, a global sensitivity analysis (GSA) has been performed to identify the most sensitive parameters to dose omissions. Then we have proposed a comparative drug forgiveness index to rank the drugs in terms of their tolerability to non compliance with application to four calcium channel blockers. The classification of these molecules in terms of drug forgiveness is in concordance to what has been reported in experimental studies. The strategies developed in this Ph.D. project and essentially based on the analysis of complex relationships between drug intake history, pharmacokinetic and pharmacodynamic properties are able to assess and regulate noncompliance impact with an acceptable uncertainly. In general, the algorithms that imply these approaches will be undoubtedly efficient tools in patient monitoring during dosing regimen. Moreover, they will contribute to control the harmful impact of non-compliance by developing new drugs able to tolerate sporadic dose omission.

A numerical model to predict train induced vibrations is presented. The dynamic computation considers mutual interactions in vehicle/track coupled system by means of a finite and discrete elements method. The vehicle is modeled by 7 bi-dimensional rigid elements representing: the body, the two boogies and the four wheels. The railway is discretized as finite Timoshenko beam elements. Axial deformation is assumed insignificant. The substructure is made-up of: rail-pads, sleepers, ballast, and background. Rail-pads are modeled as spring/damper couples without mass and sleepers are modeled as rigid elements. The rail-sleeper contact is assumed extended to a connection-area, rather than a single point assumption. To model this area many spring/damper couples are disposed along the length of sleepers. The ballast is modeled as blocks of mass made-up of rigid elements, connected to sleeper by spring/damper couples. To allow the transmission of vibrations in longitudinal direction too, spring/damper couples connect ballast elements horizontally.The dynamic interaction between the wheel-sets and the rail is accomplished by using the non-linear Hertzian model with hysteresis damping. The rail defects and the case of out-of-round wheels are considered too.A modal analysis of supporting structure is done to validate the substructure model comparing it to experimental data.Comparisons between numerical results of our model, experimental data and numerical results of others literature models are done on contact-force, rail accelerations and sleepers accelerations to validate the coupled vehicle/track system.Moreover a modal analysis of the coupled vehicle/track system is done to analyze the relationship between resonance frequencies, train velocities and ballast displacements.A sensitivity analysis is done to evaluate the variables more affecting the maintenance costs. The parameters more conditioning the ballast maintenance costs are the ballast modulus and the train mass.The effects of train velocity on the ballast displacements are analyzed in relationship with substructure properties. A new formulation to evaluate the railway toll connected to ballast wear is introduced.A new interpretation of the critical velocity in the range 100-300 km/h is proposed.

本文使用Esscher轉換法推導狀態轉換模型、跳躍獨立風險下狀狀態轉換模型及跳躍相關風險下狀態轉換模型的選擇權定價公式。藉由1999年至2011年道瓊工業指數真實市場資料使用EM演算法估計模型參數並使用概似比檢定得到跳躍相關風險下狀態轉換模型最適合描述報酬率資料。接著進行敏感度分析得知，高波動狀態的機率、報酬率的整體波動度及跳躍頻率三者與買權呈現正相關。最後由市場驗證可知，跳躍相關風險下狀態轉換模型在價平及價外的定價誤差皆是最小，在價平的定價誤差則略高於跳躍獨立風險下狀態轉換模型。 / In this paper, we derive regime switching model, regime switching model with independent jump and regime switching model with dependent jump by Esscher transformation. We use the data from 1999 to 2011 Dow-Jones industrial average index market price to estimate the parameter by EM algorithm. Then we use likelihood ratio test to obtain that regime switching model with dependent jump is the best model to depict return data. Moreover, we do sensitivity analysis and find the result that the probability of the higher volatility state , the overall volatility of rate of return , and the jump frequency are positively correlated with call option value. Finally, we enhance the empirical value of regime switching model with dependent jump by means of calculating the price error.

In this thesis a number of statistical methods have been developed and applied to habitat suitability modelling for rare and threatened species. Data available on these species are typically limited. Therefore, developing these models from these data can be problematic and may produce prediction biases. To address these problems there are three aims of this thesis. The _rst aim is to develop and implement frequentist and Bayesian statistical modelling approaches for these types of data. The second aim is develop and implement expert elicitation methods. The third aim is to apply these novel approaches to Australian rare and threatened species case studies with the intention of habitat suitability modelling. The _rst aim is ful_lled by investigating two innovative approaches for habitat suitability modelling and sensitivity analysis of the second approach to priors. The _rst approach is a new multilevel framework developed to model the species distribution at multiple scales and identify excess zeros (absences outside the species range). Applying a statistical modelling approach to the identi_cation of excess zeros has not previously been conducted. The second approach is an extension and application of Bayesian classi_cation trees to modelling the habitat suitability of a threatened species. This is the _rst `real' application of this approach in ecology. Lastly, sensitivity analysis of the priors in Bayesian classi_cation trees are examined for a real case study. Previously, sensitivity analysis of this approach to priors has not been examined. To address the second aim, expert elicitation methods are developed, extended and compared in this thesis. In particular, one elicitation approach is extended from previous research, there is a comparison of three elicitation methods, and one new elicitation approach is proposed. These approaches are illustrated for habitat suitability modelling of a rare species and the opinions of one or two experts are elicited. The _rst approach utilises a simple questionnaire, in which expert opinion is elicited on whether increasing values of a covariate either increases, decreases or does not substantively impact on a response. This approach is extended to express this information as a mixture of three normally distributed prior distributions, which are then combined with available presence/absence data in a logistic regression. This is one of the _rst elicitation approaches within the habitat suitability modelling literature that is appropriate for experts with limited statistical knowledge and can be used to elicit information from single or multiple experts. Three relatively new approaches to eliciting expert knowledge in a form suitable for Bayesian logistic regression are compared, one of which is the questionnaire approach. Included in this comparison of three elicitation methods are a summary of the advantages and disadvantages of these three methods, the results from elicitations and comparison of the prior and posterior distributions. An expert elicitation approach is developed for classi_cation trees, in which the size and structure of the tree is elicited. There have been numerous elicitation approaches proposed for logistic regression, however no approaches have been suggested for classi_cation trees. The last aim of this thesis is addressed in all chapters, since the statistical approaches proposed and extended in this thesis have been applied to real case studies. Two case studies have been examined in this thesis. The _rst is the rare native Australian thistle (Stemmacantha australis), in which the dataset contains a large number of absences distributed over the majority of Queensland, and a small number of presence sites that are only within South-East Queensland. This case study motivated the multilevel modelling framework. The second case study is the threatened Australian brush-tailed rock-wallaby (Petrogale penicillata). The application and sensitivity analysis of Bayesian classi_cation trees, and all expert elicitation approaches investigated in this thesis are applied to this case study. This work has several implications for conservation and management of rare and threatened species. Novel statistical approaches addressing the _rst aim provide extensions to currently existing methods, or propose a new approach, for identi _cation of current and potential habitat. We demonstrate that better model predictions can be achieved using each method, compared to standard techniques. Elicitation approaches addressing the second aim ensure expert knowledge in various forms can be harnessed for habitat modelling, a particular bene_t for rare and threatened species which typically have limited data. Throughout, innovations in statistical methodology are both motivated and illustrated via habitat modelling for two rare and threatened species: the native thistle Stemmacantha australis and the brush-tailed rock wallaby Petrogale penicillata.

Les travaux de la présente thèse portent sur le recalage de modèles dynamiques d’aubes de turbinecomposites à matrice céramique. Ils s’inscrivent dans le cadre de la quantification d’incertitudes pour la validation de modèles et ont pour objectif de fournir des outils d’aide à la décision pour les ingénieurs desbureaux d’études. En effet, la dispersion importante observée lors des campagnes expérimentales invalidel’utilisation des méthodes de recalage déterministe. Après un état de l’art sur la relation entre les incertitudeset la physique, l’approche de Vérification & Validation a été introduite comme approche permettantd’assurer la crédibilité des modèles numériques. Puis, deux méthodes de recalages stochastiques, permettantde déterminer la distribution statistique des paramètres, ont été comparées sur un cas académique. La priseen compte des incertitudes n’élude pas les potentielles compensations entre paramètres. Par conséquent, desindicateurs ont été développés afin de détecter la présence de ces phénomènes perturbateurs. Ensuite, lathéorie info-gap a été employée en tant que moyen de modéliser ces méconnaissances. Une méthode derecalage stochastique robuste a ainsi été proposée, assurant un compromis entre la fidélité du modèle auxessais et la robustesse aux méconnaissances. Ces outils ont par la suite été appliqués sur un modèle éléments / This work is focused on the stochastic updating of ceramic matrix composite turbine blade model. They arepart of the uncertainty quantification framework for model validation. The aim is to enhance the existing toolused by the industrial decision makers. Indeed, consequent dispersion was measured during the experimentalcampaigns preventing the use of deterministic approaches. The first part of this thesis is dedicated to therelationship between mechanical science and uncertainty. Thus, Verification and Validation was introduced asthe processes by which credibility in numerical models is established. Then two stochastic updatingtechniques, able to handle statistic distribution, were compared through an academic example. Nevertheless,taking into account uncertainties doesn’t remove potential compensating effects between parameters.Therefore, criteria were developed in order to detect these disturbing phenomena. Info-gap theory wasemployed as a mean to model these lack of knowledge. Paired with the stochastic updating method, a robuststochasticapproach has been proposed. Results demonstrate a trade-off relationship between the model’sfidelity and robustness. The developed tools were applied on a ceramic matrix composite turbine blade finiteelement model.