The study of novel properties of materials in nanometer length scales has been an extensive area of research in the recent past. The field of nanosciece and nanotechnology deals with such studies and has gained tremendous importance because of the potential applications of these nanosystems in devices. Many of the bulk properties tend to change as a function of size, be it particle size in case of nanoparticles, or thickness in case of very thin films. Not only is it important to study these changes from the point of view of applications, but also the interesting physics behind such changes prompts further research and exploration in this area. In this thesis we try to see how changes in the length scales affect the properties of nanoparticles and how change in thickness affects the properties of thin films, along with making an effort towards measurements of conductivity in the nanoscale using the technique of electron magnetic resonance (EMR) signal shape analysis. Electron magnetic resonance is a general term used to combine both electron paramagnetic resonance (EPR) and ferromagnetic resonance (FMR). This thesis deals with mainly two kinds of systems viz., nanoparticles of doped rare earth manganites and thin films of the conducting polymer, vapor phase polymerized polyethylendioxythiophene (VPP PEDOT). The general formula for doped manganites is A1-xBxMnO3 where A is a rare earth trivalent cation like La3+, Pr3+, Nd3+..., and B is an alkaline earth divalent cation like Sr2+, Ca2+, Ba2+... These together with Mn and O form the distorted perovskite structure to which manganites belong. The phase diagram of doped manganites involves many interesting phases like ferromagnetic metallic, antiferromagnetic insulating and charge ordered insulating phases. The magnetic properties of the manganites are governed by exchange interactions between the Mn ion spins. These interactions are relatively large between two Mn spins separated by an oxygen atom and are controlled by the overlap between the Mn d-orbitals and the O p-orbitals. The changing Mn-O-Mn bond lengths and bond angles as a function of the radius of the A and B cations [1, 2], and the different magnetic interactions among the Mn3+ and Mn4+ ions together are responsible for the different phases that we see in manganites as a function of temperature and magnetic field. Manganites have potential applications in the field of spintronics because of their colossal magnetoresistance (CMR) [3] and half-metallic [4] properties. Studies on nanoscale manganites have shown that as size reduces, their electrical and magnetic properties change significantly[5]. By changing the morphology and grain size, the properties of CMR manganites can be tuned [6-9]. Phase separation seems to disappear in nanoparticles compared to bulk [10]. In the charge ordered manganites, size reduction is known to bring about suppression of charge order [11], emergence of ferromagnetism [12, 13] and even metallicity in some nanostructures [12]. The conducting polymer under study viz., VPP PEDOT is in a semiconducting phase at room temperature and becomes more insulating as temperature reduces. It is a technologically important polymer which has cathodically coloring property, can be used as a highly conducting electrode in organic solar cells and organic LEDs [14-16]. In the following we give a summary of the results reported in the thesis chapter by chapter. Chapter 1: This chapter of the thesis consists of an introduction to the physics of manganites and the technique of EMR. This includes a detailed account of previous EMR studies done on manganites, in particular nano manganites. There is a section about different line shapes observed in EMR of manganites, their origin and how to fit them to an appropriate lineshape function [17]. There is an introduction to the transport properties of conducting polymers, including how magnetic fields can affect the transport and the mechanism behind variable range hopping transport which is the dominant kind of transport in such polymeric systems. There is also a description of the different experimental methods and instruments used to study the systems in the thesis and their working principles. They are: EPR spectrometer, SQUID magnetometer, Janis cryostat with superconducting magnet, atomic force microscope (AFM) and transmission electron microscope (TEM). Chapter 2: This chapter deals with the method of contactless conductivity of nanoparticles using EMR lineshape analysis. It is difficult to measure the conductivity of individual nanoparticles by putting contacts. Other methods tend to include the contribution of grain boundaries which mask the grain characteristics [5]. We have introduced a new contactless method to measure the conductivity of nanoparticles in a contactless manner [18]. Metallic nanoparticles in which the skin depth is less than the size of the particles, exhibit an asymmetric EMR signal called the Dysonian [19]. Dysonian lineshape is an asymmetric lineshape with the so-called A/B ratio >1, where, A is the amplitude of the low field half of the derivative and B is the amplitude of the high field half. In a ferromagnetic conducting sample, the lineshape has contributions from the Dysonian part and also a part which arises due to magnetocrystalline anisotropy [20]. We have developed a method of deconvoluting the signals from conducting nanoparticles to take out the Dysonian part from them and measure the A/B ratio as a function of temperature. The A/B ratio thus determined can then be used to find out the ratio of the sample size to the skin depth using the work by Kodera [21]. The skin depth can be used to determine the conductivity by using the relationship  = (1/)1/2, where,  is the measuring frequency,  is the conductivity and  is the permeability. This technique has been used to determine the conductivity as a function of temperature (from 60 K to 300 K) of La0.67Sr0.33MnO3 (LSMO) nanoparticles of average size 17 nm. The method has been cross-checked by measuring the conductivity of bulk LSMO particles at 300 K by EMR lineshape analysis method and by standard four-probe method, which give conductivity values close to each other within experimental error. Chapter 3: In this chapter, we report a novel phenomenon of disappearance of electron-hole asymmetry in nanoparticles of charge ordered Pr1-xCaxMnO3 (PCMO). In bulk PCMO there is asymmetry in electric and magnetic properties seen on either side of x = 0.5. In the samples with x = 0.36 (hole doped: called PCMH) and x = 0.64 (electron doped: called PCME), the bulk sample has opposite g-shifts as observed in EPR signals [22]. PCME sample shows g-value less than and PCMH sample shows g-value greater than the free electron g-value at room temperature. This is explained using the opposite sign of the spin-orbit coupling constant for the two different kinds of charge carriers. But when the size of PCMH and PCME is reduced to nanoscale (average size ~ 20 nm), the g-shift was seen on the same side i.e., positive and almost equal g-shift in both cases. This points towards a disappearance of electron-hole asymmetry at nanoscale. This positive g-shift is analyzed in the two cases in the light of disappearance of charge ordering and emergence of ferromagnetism in these systems, since emergence of ferromagnetic hysteresis is noticed at low temperatures in both nano PCMH and nano PCME. In nano PCMH, charge ordering completely disappears and in nano PCME it weakens. Exchange bias is seen in both the systems, suggestive of core-shell structure [23] in the nanoparticles. Other competing factors include spin-other orbit interactions and size reduction induced metallicity [12] which can average out the anisotropies in the system, causing the asymmetry to disappear. Chapter 4: This chapter deals with thickness induced change in transport mechanism in VPP PEDOT thin films. Two samples were studied with average thickness of 120 nm (VP-1) and 150 nm (VP-2). The average room temperature conductivity of VP-1 was found to be 126 Scm-1 and VP-2 was 424 Scm-1. The transport mechanism in VP-1 is seen to be 2-dimensional variable range hopping (VRH) [24]. However, as the thickness increases by 30 nm, the transport mechanism in VP-2 is found to be 3-dimensional VRH. The low temperature magnetotransport is analyzed in the two systems and it shows that there is wavefunction shrinkage in both the systems at 1.3 K [24]. The DC transport results are cross checked with AC transport data at 5 different temperatures in the frequency range of 40 Hz to 110 MHz. The data can be analyzed by using the extended pair approximation model [25]. The AC transport shows the presence of a critical frequency 0 which marks the transition from the frequency independent to a frequency dependent region. The value of 0 decreasing with decreasing temperature suggests that the system is becoming more insulating and it supports the DC transport model of VRH. The morphological studies were done using AFM which revealed higher grain size for VP-2, confirming the direct correlation of the average grain size with the conductivity of the sample. Chapter 5: summarizes the main conclusions of the thesis, also pointing out some future directions for research in the field.

Im Rahmen der Arbeit wurde eine neuartige Variante der Hochtemperatur-Gasphasenepitaxie (HTVPE) für die Herstellung von GaN entwickelt, die eine hohe Flexibilität und bessere Kontrolle des Züchtungsprozesses ermöglicht. Für die Realisierung des Konzeptes wurde eine Züchtungsanlage für die HTVPE entworfen und aufgebaut. Des Weiteren wurde ein numerisches Modell des Wärme- und Stofftransports entwickelt und für die Untersuchungen der Transportphänomene im HTVPE-Reaktor sowie für die Weiterentwicklung des Züchtungsreaktors verwendet. Die systematischen Züchtungsexperimente zeigten eine gute Übereinstimmung mit den Simulationsergebnissen und lieferten ein besseres Verständnis der HTVPE und ihres Anwendungspotentials. Die versbesserte Prozesskontrolle ermöglichte die erstmalige Anwendung der Niedertemperatur-Nukleation für die heteroepitaktische Abscheidung von GaN auf Saphir mit der HTVPE. Weiterhin wurden Wachstumsraten über 80 µm/h erreicht und das Potential der HTVPE für die Herstellung von GaN-Volumenschichten demonstriert.

In this study unintentionally doped GaN grown by hydride vapor phase epitaxy that exhibits a sharply delimited region of green color was investigated. Optical analysis was performed by absorption and photoluminescence spectroscopy. An absorption band between 1.5 and 2.0 eV was found to be responsible for the green color and was related to a sharp emission at 1.193 eV by luminescence and excitation spectroscopy. The appearance of both optical signatures in the region of green color was related to an increase of Cr contamination detected by secondary ion mass spectrometry. We propose that the origin of green color as well as the emission line at 1.193 eV is attributed to internal transitions of Cr⁴⁺.

Diese Arbeit beschäftigt sich mit der Herstellung von organischen selbstorganisierenden (Sub-)Monolagen (sog. SAM s) auf Siliziumoxid und deren Metallisierung. Die characteristischen Strukturen dieser Oberflächen sind mit der Rasterkraftmikroskopie (RKM) untersucht worden. Im präparativen Abschnitt wird die Abscheidung des SAM (Octadecyltrichlorosilan (OTS)) in einer Toluol/Wasserlösung auf eine Siliziumoxidoberfläche und deren anschließendem lateralen Erscheinungsbild (als Octadecylsiloxan ODS) beschrieben. Die Submonolagen des ODS auf dem Oxid erscheinen in den Topografiebildern des RKM s als eine Art Insellandschaft . Diese Modellstrukturen mit stark unterschiedlicher Oberflächeneigenschaften sind in dem methodischen Teil der Arbeit unter verschiedenen äußeren Bedingungen untersucht worden. Neben der Lateralkraft (Kontakt-Modus) und der Dämpfung (dyn. Nichtkontakt-Modus) stand hier die Kontrastentstehung der Topografie im RKM im Vordergrund. Im Gegensatz zu der theoretischen Länge des ODS-Moleküls wurde eine geringere Höhe des adsorbierten Moleküls gemessen. Im zweiten Teil dieser Arbeit wurde untersucht, wie die ODS-(Unter)Struktur das Wachstum aufgedampfter Metallschichten beeinflusst. Die Ergebnisse der Evaporation mit Silber und Eisen ergaben zum Teil überraschende Ergebnisse. Frisch aufgedampfte Filme ließen die Unterstruktur anhand der Größe der Metallcluster erkennen, wobei das Silber auf ODS größere Cluster bildete als Eisen auf ODS. Nach einer Temperaturbehandlung unterscheiden sich die Systeme sehr stark, im Falle des Fe-Substrates invertierte sich der Kontrast der Topografie.

ZnO nanowires were grown using carbothermal reduction and convective vapor phase transport in a tube furnace. Si <100> substrates that were 20 mm x 76.2 mm were sputter coated with 2 nm to 50 nm gold which formed nanoparticles on the order of 50 nm in diameter through a process of Ostwald ripening upon being heated. Growth temperatures were varied from 800ºC to 1000ºC, flow rates were varied from 24 sccm to 3300 sccm, and growth durations were varied from 8 minutes to 5 hours. Vapor phase Zn, CO, and CO2, produced by carbothermal reduction and suspended in an Ar atmosphere, were flowed over the Si substrates. The Au nanoparticles formed an eutectic alloy with Zn, causing them to become liquid nanodroplets which catalyzed vapor-liquid-solid nanowire growth. The nanowires were also synthesized by self-catalyzing vapor-solid growth in some cases. Using the tube furnace never resulted in more than 50% of the substrate being covered by nanowires. It was found that a bench-top furnace could achieve nearly 100% nanowire coverage by placing the 20 mm x 76.2 mm sample face down in a quartz boat less than 2 mm above the source powder. This was because minimizing the distance between the sample and the source powder was critical to achieve macroscopically uniform growth consistently. / text

Ce travail de thèse ce focalise sur la croissance et la caractérisation de Nanofils (NFs) et de Microfils (µFs) de GaN. L'élaboration de telles structures est obtenue par épitaxie en phase vapeur d'organométalliques à partir de deux stratégies de croissances: l'une dite auto-organisée, réalisée sur substrat saphir, l'autre appelée sélective ou localisée, obtenue sur template GaN de polarité Ga. Quelque soit la stratégie employée, nous montrons que la croissance de structures verticales suivant l'axe c requièrent l'utilisation d'un flux de NH3 et d'un rapport V/III faible, lorsque nous les comparons avec les valeurs utilisées pour la réalisation de couches planaires de GaN. Les paramètres et les étapes de croissances ayant une influence sur le rapport d'aspect (hauteur/diamètre) sont étudiées et mises en évidence pour chacune des stratégies employées. Par ailleurs, les mécanismes de croissance ainsi que les propriétés structurales et optiques de ces objets sont caractérisés par MEB, MET, CL et µPL. En particulier, les expériences réalisées sur les µFs auto-organisés permettent d'observer et d'expliquer l'origine de la double polarité, de mettre en lueur la différence d'incorporation de dopants/d'impuretés entre les domaines Ga et N, d'identifier la présence de deux sections de propriétés électriques et optiques différentes, et de révéler la présence de deux types de résonances optiques: des Modes de galerie et des Modes de Fabry-Perot. D'autres part, nous étudions la courbure des dislocations vers les surfaces libres des NFs localisés et µFs auto-organisés, et pointons la présence de fautes d'empilement basales dans des régions de faibles dimensions. / This work focus on growth and characterization of GaN Nanowires (NWs) and Microwires (µWs). Such structures are obtained by Metal Organic Vapor Phase Epitaxy with two growth strategies: one called self-organized which is realized on sapphire, and the other named selective area growth which is obtained on a GaN Ga-polar template. Whatever the growth strategies employed, vertical growth of structures along the c axis requires the use of a low NH3 flux and V/III ratio, when they are compared with values used for planar growth of GaN. The influence of growth parameters and growth steps on aspect ratio (height/diameter) are studied and highlight for each growth strategies employed. Beside, growth mechanisms and structural and optical properties of such objects are characterized by SEM, TEM, CL and µPL. In particular, experiments realized on self-organized µWs enable us to observe and explain the origin of the double polarity, to highlight the dopants/impurities incorporation difference between Ga and N-domain, to identify two sections with differences in electrical and optical properties, and to reveal the presence of two types of optical resonances, identify as Whispering Gallery Modes and Fabry-Perot Modes. On the other hand, we study the bending of dislocations on free walls of localized NWs and self-organized µWs, and pointed out the presence of basal stacking faults in regions of small dimensions.

Cette thèse s'intéresse à la simulation numérique de l'explosion vapeur. Ce phénomène correspond à une vaporisation instantanée d'un volume d'eau liquide entraînant un choc de pression. Nous nous y intéressons dans le cadre de la sûreté nucléaire. En effet, lors d'un accident entraînant la fusion du cœur du réacteur, du métal fondu pourrait interagir avec de l'eau liquide et entraîner un tel choc. On voudrait alors connaître l'ampleur de ce phénomène et les risques d'endommagements de la centrale qu'il implique. Pour y parvenir, nous utilisons pour modèle les équations d'Euler dans un cadre Lagrangien. Cette description a l'avantage de suivre les fluides au cours du temps et donc de parfaitement conserver les interfaces entre l'eau liquide et sa vapeur. Pour résoudre numériquement les équations obtenues, nous développons un nouveau schéma de type Godunov utilisant des flux nodaux. Le solveur nodal développé durant cette thèse ne dépend que de la répartition angulaire des variables physiques autour du nœud. De plus, nous nous intéressons aux changements de phase liquide-vapeur. Nous proposons une méthode pour les prendre en compte et mettons en avant les avantages qu'il y a à l'implémentation de ce phénomène dans un algorithme Lagrangien. / This thesis studies numerical simulation of steam explosion. This phenomenon correspond to a fast vaporization of a liquid leading to a pressure shock. It is of interest in the nuclear safety field. During a core-meltdown crisis, molten fuel rods interacting with water could lead to steam explosion. Consequently we want to evaluate the risks created by this phenomenon.In order to do it, we use Euler equations written in a Lagrangian form. This description has the advantage of following the fluid motion and consequently preserves interfaces between the liquid and its vapor. To solve these equations, we develop a new Godunov type scheme using nodal fluxes. The nodal solver developed here only depends on the angular repartition of the physical variables around the node.Moreover, we study liquid-vapor phase changes. We describe a method to take it into account and highlight the advantages of using this method into a Lagrangian framework.

Ce travail est axé sur l'étude de l'évaporation lente d'un liquide confiné dans un tube capillaire de section carrée, en lien avec l'étude du phénomène de séchage. Dans un tel capillaire, si le liquide est suffisamment mouillant, des films liquides se forment par capillarité le long des coins internes. L'évaporation du liquide en sommet de film engendre un pompage capillaire et l'espèce volatile est alors transportée, sous phase liquide, au plus près du sommet du capillaire. Ce mode de transport dépend de la compétition entre les effets capillaires et les effets visqueux et de gravité qui s'opposent tous deux au mouvement du liquide vers le sommet du capillaire. Ces films liquides sont étudiés en adoptant une approche expérimentale. Le principe des expériences est de laisser un liquide volatil s'évaporer dans un tube capillaire carré. Plusieurs expériences d'évaporation sont réalisées en faisant varier la nature du liquide, la taille du capillaire et son orientation (horizontale et verticale). Une méthode de thermographie infra-rouge permet de mesurer le profil de température le long du capillaire. Le refroidissement induit par le changement de phase liquide-vapeur ainsi que sa position sont alors mesurables. A partir d'une méthode de visualisation par ombroscopie, plusieurs grandeurs sont mesurées : position du ménisque principal, taux d'évaporation et épaisseur relative des films. En s'appuyant sur une analyse simple du transfert de masse, on montre alors que les cinétiques d'évaporation obtenues expérimentalement se divisent en trois principales phases caractéristiques, ressemblant fortement aux trois périodes de la cinétique classique de séchage des milieux poreux capillaires. L'analyse de l'hydrodynamique des films montre qu'il est indispensable de prendre en compte l'arrondi interne des coins des capillaires dans la modélisation de l'écoulement au sein des films. On montre notamment que le phénomène étudié est très sensible à ce paramètre, qui limite l'extension des films. Ce travail expérimental a permis de développer une modélisation du transfert de masse dans la configuration étudiée, couplée à une modélisation de l'écoulement des films, et finalement de proposer un modèle de séchage d'un capillaire carré quantitativement satisfaisant. / In connection with the study of the phenomenon of drying, this work focuses on the study of slow evaporation of a liquid confined in a capillary of square cross section. In such a capillary, if the liquid wetting contact angle is low enough, liquid films are trapped by capillary forces along the capillary inside corners. Evaporation of the liquid at the film top creates a capillary pumping. The volatile species is then transported in liquid phase to the top of the capillary. This efficient mode of transport depends on the competition between the effects of capillarity and the effects of viscosity and gravity both opposing to the liquid flow towards the top of the capillary. In this work, the liquid films are studied experimentally.The principle of the experiments is to leave a volatile liquid evaporate in a square capillary tube. Several evaporation experiments are conducted, varying the liquid, the capillary tube size and its orientation (horizontal and vertical). An infrared thermography method allows to measure the temperature profile along the capillary. The cooling induced by the liquid-vapor phase change and its location is then measured. Owing to an ombroscopy visualization method, the location of the bulk meniscus, the evaporation rate and the relative thickness of the films can be measured. The experimental results show that the evaporation kinetics is similar to the drying kinetics of capillary porous media. This finding allows to study evaporation in a square capillary by analogy with the study of drying of capillary porous media. Based on a simple analysis of mass transfer in the system, it is then shown that the evaporation kinetics obtained experimentally can be divided into three main characteristic phases. The analysis of the hydrodynamic of the films shows that it is essential to take into account the roundeness of the capillary tube inside corners in the modelling of the flow in the films. We show that the phenomenon studied is very sensitive to the degree of roundedness of the tube internal corners, which limits the extension of the films. Modelling of the mass transfer coupled with modelling the film flow lead to a quantitatively satisfactory model of the drying of a square capillary tube.

Submitted by Maria Medeiros (maria.dilva1@ufcg.edu.br) on 2018-08-16T11:47:56Z No. of bitstreams: 1 FABIANA MEDEIROS DO NASCIMENTO SILVA - TESE (PPGEQ) 2017.pdf: 6622967 bytes, checksum: bfed827814b744a5e9e9e565d28f0682 (MD5) / Made available in DSpace on 2018-08-16T11:47:56Z (GMT). No. of bitstreams: 1 FABIANA MEDEIROS DO NASCIMENTO SILVA - TESE (PPGEQ) 2017.pdf: 6622967 bytes, checksum: bfed827814b744a5e9e9e565d28f0682 (MD5) Previous issue date: 2017 / Capes / O presente trabalho tem como objetivo geral sintetizar as membranas zeolíticas (Mordenita/α-alumina), utilizando os métodos de síntese hidrotérmica, crescimento secundário: dip-coating e transporte em fase vapor, para serem avaliadas no processo de separação emulsão óleo/água. Dentro deste contexto foram avaliados alguns parâmetros, destacando-se, a influência do tempo de cristalização na síntese da zeólita mordenita, a influência do precursor (sulfato de alumínio e gibsita) na síntese da membrana zeolítica, influência dos métodos de síntese das membranas zeolíticas e os testes de permeação de água e o processo de separação emulsão óleo/água. A síntese da zeólita mordenita foi realizada utilizando o método hidrotérmico a 170°C, com tempos de cristalização de 24, 36, 48, 72, 96 e 120 horas, a fim de avaliar a cristalinidade da zeólita, e selecionar o melhor tempo para a síntese das membranas zeolíticas. Os suportes cerâmicos α-alumina foram preparados a partir da decomposição dos precursores sulfato de alumínio a 1000°C e gibsita a 1200ºC por 2 horas, e conformados, compactados e sinterizados a 1300ºC por 2h, e então submetidos às técnicas de caracterização: Difratometria de raios X (DRX), Adsorção Física de Nitrogênio, Microscopia Eletrônica de Varredura (MEV), Espectroscopia de Fluorescência de raios X por Energia Dispersiva (FRX-ED) e Termogravimétrica/Térmica Diferencial (TG/DTA). As membranas zeolíticas foram sintetizadas pelos métodos de síntese hidrotérmica, crescimento secundário: dip-coating e transporte em fase vapor a 170°C por 72h e caracterizadas por DRX e MEV. Os suportes cerâmicos e as membranas zeolíticas foram avaliadas em testes de permeação de água e no sistema de separação emulsão óleo/água de um efluente sintético, utilizando um processo de separação por membrana (PSM). Os ensaios foram realizados nas condições de concentração inicial da emulsão 100 mg.L-1, temperatura de 25 °C e pressão de 2,5 bar, permitindo avaliar a permeabilidade e a seletividade a partir da variação da concentração do permeado em (mg.L-1) e da percentagem de rejeição ao óleo (%R). A partir dos resultados obtidos para a síntese dos materiais, pode-se observar a efetiva formação da zeólita mordenita em fase pura e cristalina. Os precursores foram decompostos de maneira satisfatória obtendo a fase α-alumina. A manutenção da fase α-alumina pós-produção dos suportes cerâmicos foi confirmada após caracterização. De acordo com os resultados exibidos pelas análises de DRX e MEV as membranas zeolíticas MZMOR/α-alumina apresentaram uma distribuição homogênea e uniforme dos cristais zeolíticos correspondentes à fase mordenita, sem a presença de impurezas, livres de defeitos e sem fissuras, confirmando a formação da estrutura da membrana zeolítica pelos três métodos de síntese, utilizados neste trabalho. A zeólita mordenita se mostrou excelente em relação à adesão e formação da camada zeolítica sobre o suporte cerâmico α-alumina. A partir da avaliação da permeabilidade e seletividade nos testes de separação da emulsão óleo/água, pode-se concluir que a inserção da zeólita mordenita aos suportes cerâmicos melhorou o processo de separação da emulsão óleo/água. Em termos de eficiência no processo de separação, considera-se que a membrana zeolítica MZMOR/α – Al2O3 (SHGB) foi a que apresentou melhor relação entre fluxo e capacidade seletiva, mostrando a eficácia da utilização das membranas zeolíticas. Todas as membranas zeolíticas sintetizadas e avaliadas mostraram-se promissoras. / The objective of the present work is to synthesize zeolite membranes (Mordenite/α-alumina) using hydrothermal synthesis, secondary growth: dip-coating and vapor-phase transport, to be evaluated in the oil/water emulsion separation process. The influence of the crystallization time on the synthesis of the mordenite zeolite, the influence of the precursor (aluminum sulphate and gibsite) on the synthesis of the zeolite membrane, influence of the synthesis methods of the zeolite membranes and the water permeation tests and the oil/water emulsion separation process. The synthesis of the mordenite zeolite was performed using the hydrothermal method at 170°C, with crystallization times of 24, 36, 48, 72, 96 and 120 hours, in order to evaluate the crystallinity of the zeolite, and to select the best time for the synthesis of zeolite membranes. The α-alumina ceramic supports were prepared from the decomposition of the aluminum sulfate precursors at 1000°C and gibsite at 1200°C for 2 hours, and conformed, compacted and sintered at 1300°C for 2h, and then submitted to the characterization techniques: (XRD), Nitrogen Physical Adsorption, Scanning Electron Microscopy (SEM), X-ray Fluorescence Spectroscopy (FRX-ED) and Thermogravimetric/Differential Thermal (TG/DTA). The zeolite membranes were synthesized by hydrothermal synthesis, secondary growth: dip-coating and vapor-phase transport at 170°C for 72 hours and characterized by XRD and SEM. Ceramic supports and zeolite membranes were evaluated in water permeation tests and in the oil/water emulsion separation system of a synthetic effluent using a membrane separation process. The tests were carried out under the conditions of initial concentration of the emulsion 100 mg.L-1, temperature of 25°C and pressure of 2,5 bar, allowing to evaluate the permeability and the selectivity from the variation of the permeate concentration in (mg. L-1) and the percentage of oil rejection (% R). From the results obtained for the synthesis of the materials, it is possible to observe the effective formation of zeolite mordenite in pure and crystalline phase. The precursors were satisfactorily decomposed to give the α-alumina phase. The maintenance of the post-production α-alumina phase of the ceramic supports was confirmed after characterization. The MZMOR/α-alumina zeolite membranes presented a homogeneous and uniform distribution of the zeolite crystals corresponding to the mordenite phase, without the presence of impurities, free of defects and without cracks, confirming the formation of the structure of the zeolite membrane by the three methods of synthesis, used in this work. The mordenite zeolite showed excellent adhesion and formation of the zeolitic layer on the ceramic support α-alumina. From the evaluation of the permeability and selectivity in the oil/water emulsion separation tests, it can be concluded that the insertion of the mordenite zeolite to the ceramic supports improved the separation process of the oil/water emulsion. In terms of efficiency in the separation process, the zeolite membrane MZMOR/α-Al2O3(SHGB) was considered to have the best relationship between flow and selectivity, showing the efficacy of zeolite membranes. All zeolite membranes synthesized and evaluated were promising.

One-dimensional (1D) nanostructures have gained tremendous attention over the last decade due to their wide range of potential applications. Particularly, ZnO 1D nanostructures have been investigated with great interest due to their versatility in synthesis with potential applications in electronics, optics, optoelectronics, sensors, photocatalysts and nanogenerators. The thesis deals with the challenges and the answer to grow ZnO 1D nanostructure by vapor phase transport (VPT) continuously without any length limitation. The conventional VPT technique has been modified for the non-catalytic growth of ultralong ZnO 1D nanostructures and branched structures in large area with controllable aspect ratio. It has been shown that the aspect ratio can be controlled both by thermodynamically (temperature) and kinetically (vapour flux). The thesis also deals with the fabrication of carbon nanotube (CNT) -ZnO based multifunctional devices and the field emission performance of ZnO nanowires by employing various strategies. The entire thesis has been organised as follows: Chapter 1 deals with Introduction. In this chapter, importance of ultralong nanowires and significance of ultralong ZnO nanowires has been discussed. Various efforts to grow ultralong ZnO nanowire with their advantages and disadvantages have been summarised. Lastly the significance of forming ZnO nanowires based nano hybrid structures and importance of doping in ZnO nanowires and has also been discussed. Chapter 2 deals with experimental procedure and characterization. In this chapter, a single step VPT method for the growth of ultralong ZnO nanowires that incorporates local oxidation barrier for the source has been described. The synthesized nanowires were characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman & photoluminescence. Chapter 3 deals with growth of ZnO nanowires, controlling the aspect ratio of ZnO nanowires, and role of other experimental aspects. In this chapter, a way to grow nanowires continuously without any apparent length limitation, a way to control the diameter of the nanowires kinetically without catalyst particle or seed layer and obtaining smaller diameter of the nanowires by non-catalytic growth as compared to that set by the thermodynamic limit has been discussed. Furthermore, the significance and importance of local oxidation barrier on source for protecting them from degradation, ensuring the continuous supply of vapour and enabling the thermodynamically and kinetically controlled growth of nanowires has been discussed. Lastly, the scheme for large area deposition and a method to use same source material for several depositions has been presented. Chapter 4 deals with multifunctional device based on CNT -ZnO Nanowire Hybrid Architectures same device can be used as a rectifier, a transistor and a photodetector. In this chapter, the fabrication of CNT arrays-ZnO nanowires based hybrid architectures that exhibit excellent high current Schottky like behavior with p-type conductivity of ZnO has been discussed. CNT-ZnO hybrid structures that can be used as high current p-type field effect transistors (FETs) and deliver currents of the order of milliamperes has been presented. Furthermore, the p-type nature of ZnO and possible mechanism for the rectifying characteristics of CNT-ZnO has been discussed. Lastly, the use of hybrid structures as ultraviolet detectors where the current on-off ratio and the response time can be controlled by the gate voltage has been presented and also an explanation for photoresponse behaviour has been provided. Chapter 5 deals with the substrate-assisted doping of ZnO nanowires grown by this technique. In this chapter, the non-catalytic growth of ZnO nanowires on multiwalled carbon nanotubes (MWCNTs) and soda lime glass (SLG) with controlled aspect ratio has been presented. The elemental mapping to confirm the presence and distribution of carbon and sodium in ZnO nanowires and the transport studies on both carbon and sodium doped ZnO has also been presented. Furthermore the stability of carbon doped ZnO has also been presented. Lastly, the advantage of growing ZnO nanowires on MWCNTs and overall advantage associated with this technique has been discussed. Chapter 6 deals with formation of ZnO nanowire branched structures. In this chapter, a possibility to grow ZnO nanowires on already grown ZnO nanowires has been demonstrated. The formation of branched structure during multiple growth of ZnO nanowire on ZnO nanowire has been presented and evolution of aspect ratio in these branched structures has been discussed. Furthermore, the advantage of using ZnO branched structures and also the ZnO nanoneedles on MWCNT mat for field emission has been presented. Chapter 7 summarizes all the findings of the thesis.