• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 32
  • 9
  • 1
  • Tagged with
  • 43
  • 27
  • 19
  • 18
  • 15
  • 14
  • 10
  • 8
  • 7
  • 7
  • 7
  • 7
  • 7
  • 7
  • 7
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
11

Simulering av klimatstyrning i Härnevi kyrka : påverkan på fuktupplagringen i en medeltida stenvägg / Climate control simulation in Härnevi church : moisture storage analysis of a medieval stone wall

Thor, Henric, Jesper, Håkansson January 2018 (has links)
This thesis examines how the moisture content of a stone wall from the 15th century varies with different types of climate control. The simulations in this report is based on measured data from sensors placed inside and outside Härnevi Church north of Enköping. The measured data are processed to simulate different climate control strategies in the church porch. The simulated climate control strategies are temperature control and air-dehumidification, the systems are controlled against either a mold risk curve or a fixed maximum value for the relative humidity. The simulations are performed with the program WUFI Pro 6.1; which performs onedimensional hygrothermal calculations of building component crosssections and is an alternative to the traditional Glaser-Method.Many climate simulations have been performed, though only four are fully accounted for in this dissertation. Simulations that have not resulted in surface conditions below the mold risk curve LIM I has not been included in the investigation process. Simulation results are based on climate controls against "fixed relative humidity max 71%" and "mold risk curve LIM I-10 percentage points". The results show that the desorption process of the wall is similar to all four simulations but provides different absorption processes, control against the mould risk curve allows the wall a faster water content build up. The simulations show that control against the mould risk curve results in a greater moisture storage in the wall during the winter months; compared to control the climate against a constant relative humidity. During summertime there is no significant difference in moisture storage between the various climate control simulations. The operating time to control against the mould risk curve for one year is roughly 1000 hours less than control against constant relative humidity. When considering the results in this report together with Härnevi church's current heating system, this dissertation recommends a climate control based on temperature control against a mould risk curve. The results also show the importance of investigating the difference between the mold ratio in the air and on the surface of the wall to perform a proper and safe climate control.
12

HALMBALSHUS – EN STUDIE MED FOKUS PÅ FUKTPROBLEM : Begränsning av fuktlasten med hjälp av fallstudier utförda i Wufi / STRAW BALE HOUSES - A STUDY WITH FOKUS ON MOISTURE PROBLEM

Rashed, Assad January 2021 (has links)
The purpose of this work has been to create substrates that can contribute to more moisture-proof straw bale constructions through simulations in Wufi Pro. The aim was to simulate different cases with incremental variations of different parameters and to investigate the moisture significance of the parameters. This in order to later, with the help of the results, draw conclusions about how a moisture-proof construction of straw bales can be achieved. The method of carrying out the work was to utilize; previous studies and literature on the subject, Wufi Pro 6 and Wufi Bio 3.5. The results showed that: ·         The moisture content of the straw layer varies, among other things, depending on the facade orientation and geographical location. For Karlstad facades to the south-east and south are most exposed to moisture when rain cover (coat or hat) is lacking. ·         Most exposed to moisture is the straw layers near the cold side of the outer wall. ·         Increasing the interior clay thickness slightly reduces the moisture content of the straw layer. ·         Increasing the outside clay plaster thickness slightly increases the moisture content of the straw layer to a certain thickness and then decreases the same. ·         Addition of outer panel and air gap reduces RH (relative humidity) in the straw layer by about 9%. ·         Constrution in the spring is preferable given the risk of microbial growth (for Karlstad). ·         Surface treatments prolong the drying time but reduce moisture in the straw layer afterwards. ·         Straw structures are exposed to less risk of microbial growth in warmer climates. The conclusions can be summarized as follow: ·         Moisture design should take into account differences in moisture load depending on facade orientations. ·         It is very important to protect the facade from direct rainfall. ·         It is desirable to have thicker plaster on the warm side of the outer wall campared to the cold side plaster (about twice as thick as the cold side plaster thickness). ·         Work steps that add moisture to the straw layer, such as plastering, should take place during the spring. ·         The building moisture must be minimized. ·         Increasing the diffusion density of the wall surfaces increases the drying time, which entails moisture risk in the event of moisture leaks to the straw layer. ·         Straw can be used as insulation in conventional buildings with moisture brakes, provided that moisture leaks caused by unforeseen damage do not occur. ·         If surface treatments are to be used, this should be done after the building moisture has dried out.
13

Analys av fuktomlagring i välisolerad parallelltak : Analys med simuleringsprogrammet Wufi 2D / Analysis of moisture rearrangements in ventilated roofs : Analysis with the simulation program Wufi 2D

Harzin, Latif Aref, Sourosh, Ehsani January 2013 (has links)
Idag ökar man isoleringen alltmer i takkonstruktion för att spara energi. Ökad mängd isolering minskar temperaturen över takets yttre delar och höjer den relativa fuktigheten där.  Dessutom finns risk att fuktigt material byggs in mellan alltmer täta skikt vilket leder till att det tar längre tid för byggfukten att torka. Detta resulterar i en ogynnsam fuktfördelning med höga relativa fuktigheter över konstruktionen där risken för mikrobiell påväxt ökar. Syftet med denna studie är att utreda hur fuktomlagring sker baserad på inbyggnadsfuktkvoten i välisolerade parallelltak. För att göra riskbedömning av olika takkonstruktioner har fuktsimuleringar gjorts i Wufi 2D där resultat analyserats i Wufi Bio för bedömning av risknivå för mikrobiell påväxt. Resultaten indikerar klart skillnad mellan val av ventilerad och oventilerad takkonstruktion. Det råder även en skillnad mellan val av isoleringsmaterial, takets färdigställandedatum, takets exponeringsriktning och takets utvändiga ytskikt. Slutsatsen är att det råder en större risk för mikrobiell påväxt hos oventilerad takkonstruktion, takkonstruktion som färdigställs under höst (den 1 oktober) jämfört med vår (den 1 april), takkonstruktion som är exponerad mot norr jämfört med söder samt takkonstruktion med utvändigt ytskikt av plåt istället för sedum. / Today there's an increase in the use of insulation in roof constructions in order to save energy. Increased amount of insulation allows temperature drops in the outer layers of the roof resulting in higher relative humidity in the surrounding construction.  There is also a risk that moist materials are built-in between tight layers which contributes to longer drying processes in order for the moisture to successfully dry out. This also contributes to an unfavorable divide in moisture with high relative humidity settling on top of the construction where risk of microbial growth is the greatest. The aim of this study is to investigate how moisture behaves based on the mounting quota of moist in well insulated parallel roof constructions. To make a risk assessment of different roof constructions, different simulations have been created in Wufi 2D where results are further analyzed in Wufi Bio for final assessment on whether there is an apparent microbial advantage. The result help shimmer light on the differences between ventilated and unventilated roof constructions. There is also an evident importance in choice of insulation materials, the finish-date for the roof, exposure vulnerability and the outer coating of the roof. The conclusion is that there is a greater risk of microbial damages in unventilated roof constructions when comparing the roof construction that is finished first of October in comparison to first of April, the roof construction that is exposed to north rather than south and to the roof construction with outer surface layer of tin rather than sedum.
14

Problem i högt fuktbelastade byggnader : Riskbedömning med hjälp av WUFI / Problems in buildings with high moisture load : Risk assessment using WUFI

Wong, Katilla, Bergh, David January 2012 (has links)
Många av Sveriges badhus byggda i slutet av 1900-talet börjar idag visa tecken på kraftiga fuktskador på grund av extrema inomhusklimat. Denna rapport förklarar den allmänna problematiken kring högt fuktbelastade byggnader och berör det fuktskadade badhuset Aquarena i Katrineholm.  Extrem noggrannhet krävs vid montering av ångspärr i en konstruktion, speciellt vid högt invändigt fukttillskott. Optimal placering av fuktspärren i konstruktionens varmare del innebär att fukt aldrig tillåts kondensera och därmed minimeras risken för fuktskador och negativa konsekvenser. Verkligheten visar också att om kunskaper om fukt och fuktskador prioriteras redan i ett tidigt stadium under projektering kan många hundratusentals kronor sparas. Beräkningar av fukttransport har gjorts för tidigare ytterväggskonstruktion i Aquarena (den som drabbats av skador) och nybyggd ytterväggskonstruktion (nyframtagen till återuppbyggnaden) i datorprogrammet WUFI Pro 4.2 och analyserats i WUFI Bio 3.0.  Beräkningarna visar att den tidigare väggkonstruktionen får de skador som undersökningar av den visat och att skadorna hade kunnat undgås om genomförningar i ångspärren hade utförts på ett korrekt sätt.  Vi har med beräkningar inte kunnat bevisa att alla delar i den nybyggda ytterväggskonstruktionen kommer fungera perfekt. Främst beror osäkerheten i beräkningar utförda i WUFI på att beräkningsmodellen inte är färdigutvecklad. Osäkerheter beror också på otillräcklig kännedom av egenskaper hos de simulerade materialen. Beräkningar för den nyframtagna väggkonstruktionen visar dock entydigt på bättre resultat än för den tidigare väggkonstruktionen. Det finns därför anledning att vidare utreda vilka värden på fukt och temperatur som kommer att råda över de närmaste åren. Detta bland annat för att senare kunna korrigera beräkningsmodellen efter verkligheten. / Many of Sweden's public indoor swimming pools built in the late 1900’s are beginning to show signs of excessive moisture damage due to extreme indoor climate. This report explains the general problem of high moisture-loaded buildings and involves the moisture-damaged public indoor swimming pool Aquarena in Katrineholm. Extreme care is required when assembling the moisture barrier in a structure, especially with high internal moisture content. Optimal placement of the moisture barrier in the warmer parts of the construction means that moisture is never allowed to condense, thus minimizing the risk of moisture damage and negative consequences. Reality also shows that if risks of moisture and moisture damages are assessed early in the planning process, amounts in the range of hundreds of thousands of Swedish crowns can be saved. Calculations of moisture transport have been made for the previous exterior wall structure (the one that suffered damage) and new exterior wall structure the (new design for the reconstruction) using the computer program WUFI Pro 4.2 and analyzed in WUFI Bio 3.0. Calculations show that the old exterior wall structure in Aquarena would have been able to withstand moisture damage and damages due to moisture if joints and transitions in the moisture barrier had been correctly performed.  Calculations have not proven that all elements of the newly built wall design will work perfectly. The main reason for uncertainty in calculations when using WUFI is that the calculation model is not fully developed. Uncertainty is also due to insufficient knowledge of properties of the simulated materials. However, calculations show unambiguously better results than the previous wall construction. It is therefore necessary to further investigate what values of humidity and temperature will exist over the next few years to be able to later on correct the calculation model after reality.
15

Hur skall en ishallsvägg byggas? : Fuktrisker och mögelanalys / How should an ice hall wall be built? : Moisture risks and mold analysis

Yousif, Shather, Douglah, Amir January 2017 (has links)
In Sweden there are many ice halls and ice halls climate differ from the usual buildings' climate, because temperatures are lower indoors than outdoors during the summer months. This results in a higher vapor content outdoors compared with indoors during the course of the year. Moisture transport takes place from the outside towards the ice halls, which is contrary to what happens in a common building. During the critical period, the vapor transport direction is inward. When the hot air hits the cold surface of the wall structure, it leads to a risk of condensation in the wall that leads to moisture damage. Moisture damage can impair the wall structure and lead to unwanted consequences. The purpose of this study was to dimension a number of walls that meet climate conditions, which are done by dynamic humidity calculation in WUFI Pro 5.1 with adapted climate data and real climate data and then mold analysis in WUFI Bio. The aim of the bachelor thesis work was that the results from this study can then be used as a guide to the future building of ice skating walls. The results from WUFI Pro 5.1 and WUFI Bio have shown that a number of walls designed during this master thesis are judged to work as well as revealed how an ice hallway wall should not be constructed. The conclusion shows that climate conditions control the design of the wall structure. / I Sverige finns det många ishallar och ishallsklimatet skiljer sig från vanliga byggnaders klimat, detta på grund av att temperaturen är lägre inomhus än utomhus under sommarhalvåret. Detta resulterar i en högre ånghalt utomhus jämfört med inomhus under en del av året. Fukttransporten sker då utifrån och in mot ishallen, det vill säga tvärtemot vad som sker i en vanlig byggnad. Under den kritiska perioden är ångtransportsriktningen inåt. När den varma luften träffar den kalla ytan i väggkonstruktionen, medför det en risk för kondens i väggen som leder till fuktskador. Fuktskador kan försämra väggkonstruktionen och leda till oönskade konsekvenser som exempelvis mögelpåväxt och rötskador. Syftet med studien har varit att dimensionera ett antal väggar som klarar av klimatförutsättningarna, detta gjordes genom dynamisk fuktberäkning i WUFI Pro 5.1 med anpassade klimatdata samt verkliga klimatdata och sedan mögelanalys i WUFI Bio. Målet med examensarbetet var att resultaten från denna studie sedan kan komma att användas som en vägledning till framtida byggen av ishallsväggar. Resultaten från WUFI Pro 5.1 och WUFI Bio har visat att ett antal väggar som konstruerats under detta examensarbete bedöms att fungera samt kommit fram till hur en ishallsvägg inte skall konstrueras. Slutsatesen visar att klimatförutsättningarna styr dimensioneringen av väggkonstruktionen.
16

Analys av fuktsäkerhet hos hybridelement kontra sandwichelement

Abdulahad, Aziz, Ohlsson, Martin January 2022 (has links)
Denna studie är ett examensarbete inom byggingenjörsprogrammet på Högskolan Dalarna i Borlänge. Examensarbetet belyser det nya hybridelementet och dess fuktrelaterade egenskaper, samt jämför hybridelement med en gammal beprövad lösning i sandwichelement från fuktperspektiv. Denna studie är av intresse då byggbranschen behöver nya hållbarare lösningar som detta hybridelement erbjuder. Syftet med denna studie är att jämföra fukttekniska egenskaper för sandwichelement och hybridelement med hjälp av intervjuer och simulering av hybrid- och sandwichelement i WUFI. Ett vidare syfte är att analysera beteende hos båda element när de utsätts för olika mängder fukt, undersöka eventuella fuktrelaterade problem hos dessa element samt möjligheten att bygga med hybridelement i stället för sandwichelement. Studiens resultat bekräftar att hybridelement rent teoretisk är en godtagbar lösning när det kommer till fuktsäkerhet. Samtidigt konstateras av slutsatsen att en god täthet hos en vägg är en viktig parameter men räcker inte alltid för att garantera fuktsäkerheten, utan täthet behöver kompletteras med noggrann projektering och utförande. / This study is a thesis within the construction engineering program at Dalarna University in Borlänge. This thesis highlights the new hybrid element and its moisture-related properties, as well as comparing hybrid elements with the old proven solution of sandwich elements out of moisture perspective. This study is of interest as the construction industry needs new, more sustainable solutions that this hybrid element offers. The purpose of this study is to compare moisture properties of both sandwich and hybrid elements out of interviews and simulation of hybrid- and sandwich element with the help of a WUFI program. A further purpose is to analyse the behaviour of both elements when exposed to different amounts of moisture, investigate possible moisture-related problems in these elements and the possibility of building with hybrid elements instead of sandwich elements. The results of the study confirm that hybrid elements are theoretically an acceptable solution when it comes to moisture safety. At the same time, the conclusion concludes that a good tightness of a wall is an important parameter, but is not always enough to guarantee moisture safety, but tightness needs to be completed with careful design and execution.
17

Yttervägg av trä utan invändig diffusionsbarriär : En byggnadsfysikalisk studie av en stuga

Vaa, Kristian Huustad January 2018 (has links)
Trä har byggnadsfysikaliska egenskaper som skiljer   det från en del andra material som traditionellt har blivit använda som   bärande delar vid byggen. Träets hygroskopiska egenskaper och låga egenvikt   ger andra användningsområden än till exempel betong eller stål. Dess låga   egenvikt ger också spännande konstruktionsmässiga möjligheter och kan göra   det möjligt att bygga på platser som annars inte är tillgängliga utan   användning av mer avancerande tekniker och transportmetoder. I denna rapport har en del av ytterväggen till en   stuga undersökts med avsikt att bedöma huruvida det i väggkonstruktionen   kommer uppstå problem med mögelangrepp. Den undersökta delen av väggen ligger   tre meter under marknivå. Väggen är konstruerad med en ångspärr mot marken   och med ett en meter tjockt lager cellglasgrus mot denna. Innanför   cellglasgruset är det en geotextil, 2 x 100 mm träfiberisolering samt 93 mm   vertikalt timrat limträtimmer vilket också utgör ytskiktet på invändig sida. Undersökningen utfördes som en analys av en   simulering som blev genomförd med mjukvaran WUFI® Pro 6.1. Resultaten av   analysen var kvantitativa data i form av grafer och diagram. Resultatet av simuleringen visade att det inte   kommer uppstå problem med mögel i konstruktionen. Dock är träets   fuktbuffrande egenskaper tydliga och det anses generellt viktigt att se till   att material har en inbyggnadsfukthalt som är under det som är gynnsamt för   växt av mögel. / Wood has physical   properties that makes it different from most other materials that   traditionally has been used as load bearing parts when constructing a   building. The hygroscopic properties and low relative weight of wood makes   room for a different field of application than what is the case with for   instance concrete or steel. Its low relative weight also gives interesting   constructional possibilities and can make it possible to build on sites   otherwise inaccessible without advanced techniques and means of transport. In this report   the lower part of an exterior wall in a mountain cabin has been studied. The   purpose of the study has been to examine whether the cabin will have problems   related to mould or fungus. The examined part of the wall lies three meters   below ground level. It is constructed with a steam barrier towards the ground,   and a one meter thick layer of foam glass fragments on the inside of this.   Further towards the inside of the wall there is a geotextile, two layers of   100 mm wood fibre insulation and one layer of 93 mm thick laminated   vertically timbered timber, which faces the inside of the cabin. The examination   was performed as an analysis of a simulation made with the software WUFI® Pro   6.1. The results of the analysis were quantitative data in the form of graphs   and diagrams that were easily assessed against relevant literature. The results from   the simulation showed that the construction would not have any problems   related mould or fungus. However, the moisture buffering properties of the   wood are obvious, and it is generally considered important that materials have   a built-in moisture that is below what is favourable for mould or fungus   growth. / <p>Betyg 2019-06-05</p>
18

Uttorkning av komplexa betongkonstruktioner : Uttorkningstider för foggjutning och pågjutning på HD/F / Dehydration of complex concrete structures : Dehydration time for joint grouting and grouting on HD/F

Makdesi Elias, Jamil, Yousif, Filip January 2014 (has links)
Byggandet av dagens sjukhus har blivit allt mer komplext. När det kommer till uppbyggnaden av stomkonstruktionen har kraven för vibrationer ökat. För att säkerställa kraven för stomvibrationer måste pågjutningens tjocklek öka med ca 90 mm från standarden som är ca 40 mm. Att utföra denna extra pågjutning är inte ett problem i sig, utan den extra torktiden som tillkommer. Den extra torktiden är inte det enda problemet. De beräkningsprogram som finns ute på marknaden idag kan inte behandla alla typer av konstruktioner och simuleringar, dock skulle det kunna gå att dela upp simuleringsprocessen för uttorkningen emellan beräkningsprogrammen. I denna studie så kommer två olika simulering/beräknings program att tillämpas. Beräkningsprogrammen som kommer att användas är TORKA S och WUFI. Torktiderna kommer att räknas fram genom att kombinera dessa program samt titta på tidigare studier gällande detta projekt. I denna studie har vi valt att ta en närmare titt på hur foggjutningen mellan håldäcken påverkar torktiden för hela delområdet, dvs. foggjutningen och pågjutningen. Resultaten visar att vct för foggjutningen måste vara betydligt lägre än vct för pågjutningen och att torktiderna varierar beroende på vct. Torktiderna för pågjutningen varierar om mätningar görs över fog eller mitt på håldäcken. / Constructions of hospitals today have become more complex than before. As for the construction of the frame structure, the requirements for vibration in the body have increased. To fulfill the requirements for frame vibrations the top coating thickness must be increased with 90 mm ​​from the standard thickness, which is around 40 mm. To perform this extra topping is not the biggest issue. The major problem is the extra drying time that is added in the process. Another large problem is the calculation programs that are available on the market today cannot deal with all types of designs and simulations; however it would be possible to divide the simulation process for the dehydration between different calculation programs. In this study, two different simulation/calculation programs will be used. The programs that will be applied are TorkaS 3.2 and WUFI Pro. Drying times will be generated by combining these programs and look at previous studies similar to this project. In this study we have chosen to take a closer look at how joint cast between the slabs affects the drying time for the entire sub-area, which is the joint cast and topping cast. The results of the w/c-ratio for joint cast must be significantly lower than w/c-ratio for topping and that drying times will vary depending on the w/c-ratio. Drying times for topping will also vary if measurements are made over the joint or middle of the slab.
19

Vanadislundens vattenreservoar : Konsekvensanalys av avfuktning i icke uppvärmda byggnader / Vanadislunden’s water reservoair : Impact assessment of dehumidification in unheated buildings

Kourie, Samuel, Ure, Charbel January 2022 (has links)
Kondens i icke-uppvärmda byggnader är ett välkänt problem, men hur dessa byggnader bör hanteras är mindre känt. I Vanadislundens vattenreservoar installerades en avfuktnings anläggning med förväntan att kondensen som funnits i byggnaden i 100 år ska försvinna. Problemet som istället uppstod var saltutfällningar och saltsprängningar på insida yttervägg. Detta examensarbete är baserat på att ge en beskrivning av hur salt-sprängningar och utfällningar sker. Samt vad som händer då denna typ av byggnad avfuktas samt hur denna typ av byggnader bör hanteras.  Detta arbete gjordes dels genom att göra en litteraturstudie om fenomenet saltutfällningar och sprängningar, hur dessa uppstår och varför. Samt genom beräkningsprogrammet WUFI där olika situationer simulerades för att besvara frågeställningarna. Vid fall 1, då den relativa fuktigheten (RF) sattes till 90% gavs slutsatsen att inga problem bör uppstå med saltutfällningar eller sprängningar. Vid fall 2 då den relativa fuktigheten sattes till 70%, torrt inneklimat, gavs slutsatsen att problem kan uppstå.  Den generella slutsatsen som detta arbete resulterade var att denna typ av byggnad bör hanteras med stor omtanke och att avfukta denna typ av byggnad kan leda till stora problem. / Condensation in unheated buildings is a well-known problem, but how these buildings should be handled is less known. A dehumidification plant was installed in Vanadislunden's water reservoir with the expectation that the condensation that had existed in the building for 100 years would disappear. The problem that arose instead was salt deposits and salt explosions on the inside of the outer wall. This thesis is based on giving a description of how salt explosions and precipitations occur. And what happens when this type of building is dehumidified and how this type of building should be handled.This work was done partly by doing a literature study on the phenomenon of salt precipitation and explosions, how these occur and why. And through the calculation program WUFI where different situations were simulated to answer the questions. In case 1, when the relative humidity (RH) was set to 90%, it was concluded that no problems should arise with salt precipitation or explosions. In case 2 when the relative humidity was set to 70%, dry indoor climate, it was concluded that problems may arise.The general conclusion that this work resulted in was that this type of building should be handled with great care and that dehumidifying this type of building can lead to major problems.
20

Fuktanalys av kallvind i ett befintligt lågenergihus med hjälp av WUFI och en praktisk fältstudie / Moisture analysis of a cold attic in a low energy house with the use of WUFI and a field study

Trandem, Kevin, Loberg, Karl January 2017 (has links)
Issues related to moisture are one of the most common problems buildings are exposed to. Moisture issues have a tendency to lead to damage and growth of unwanted microorganisms on the buildings structure. Buildings troubled of issues related to moisture may have a negative impact on the indoor environment, the health of the people living there and the abrasion resistance of the structure. According to a research published by Boverket in 2010, approximately 36 % of all buildings in Sweden suffers from damage and mold in relation with moisture, most troubled by these kind of issues are small houses. More specifically, the attic in small houses is the most troubled part. The cost of maintenance for the damage caused by moisture is estimated to 91,2 billion SEK. The origin of moisture issues can depend on several different factors. Weather and climate are of great meaning if a building will be exposed to moisture issues. Precipitation, air humidity, temperature, wind speed and wind direction are some contributing factors. Today, constructing energy-saving buildings is a hot topic and a consequence of the more strict regulations regarding energy consumption. The sector of construction and service stands for approximately 40 % of Swedens total consumption of energy. Due to the topic of houses with a low consumption of energy, new ideas have come forward through the years and a typical example is the concept: Low energy house. Low energy houses are projected as dense houses with a high amount of insulation included with purpose to minimize the loss of thermal energy. Debates regarding how low-energy house has an increased risk to exposure of moisture issues than traditional houses as a consequence to a more dense structure, is common. Theoretically, low-energy houses have an increased risk for exposure but it can be avoided depending on the layout of the house and knowledge of moisture issues. Cold attics constitute a room in the attic where the climate has a resemblance to the outdoor climate. Former studies show a trend that cold attics have an increased risk for exposure of mold growth as a consequence to moisture issues. A low-energy house with a cold attic should, according to what is stated above, make a great risk for exposure of moisture issues. In this study a moisture analysis is performed of a cold attic in a low-energy house. The house is located in Molkom, Värmland and is relatively new-built. The goal with the analyzation is to examine if parts of the cold attic has a risk to be exposed to mold due to moisture issues and with relation to weather factors. The analyze was performed using two separate methods: a field study where moisture-measuring equipment was attached to the roofs trusses inside the cold attic in order to measure moisture ratio in these, relative air humidity and temperature in the surroundings of the trusses. A weather station was set up in the closeness of the house in purpose to be able to compare weather data to the data recorded by the measuring equipment in the attic. The weather station measured temperature, relative air humidity, precipitation, wind speed and wind direction from the outdoor climate. The second method was based on performing a thermal and humidity simulation using WUFI. In the program a simulation of the cold attic was performed. The simulation presented moisture data during the same interval as the field study and for the further five years to come. Measured data from measuring equipment, weather station and WUFI was compiled in order to be analyzed using produced, critical values for mold growth. Factors of values which was used for performing the analysis and the final evaluation was following: Relative air humidity, temperature and moisture ratio in the wood of the roofs trusses. The study showed that the cold attic does not make a risk for being exposed to issues regarding mold growth thus reign of critical values during some of the periods of the interval. The outdoor climate indicated to have a controlling effect on the climate in the attic. The relative air humidity in the attic rises when precipitation occurs and also when powerful, southwestern and southern winds reigns. The relative air humidity in the attic increases substantially when precipitation occurs in combination with southern winds. As precipitation occurs in itself, the temperature drops in the attic. Temperature in the attic does not show any noticeable connection to wind direction or speed. The roof trusses moisture ratio increases during periods of precipitation and also when southern or northern winds reigns. Wind speed does not show any noticeable connection with how the moisture ratio differs. The relative air humidity in the cold attic has a close resemblance to the relative air humidity outside.  The temperature in the cold attic has a close resemblance to the temperature outside.  Moisture ratio in the roof trusses does not show any noticeable connection to relative air humidity and temperature outside. / Fuktproblem är bland de vanligaste problemen som ett hus kan utsättas för. Problem i form av fukt leder ofta till skador eller tillväxt av oönskade mikroorganismer i husets konstruktion. Hus som drabbats av problem i samband med fukt kan ha en negativ inverkan på inomhusmiljön och hälsan för de människor som vistas i husen samt försämra konstruktionens hållfasthet. Enligt en undersökning publicerad av Boverket år 2010 är cirka 36 % av alla byggnader i Sverige utsatta för fukt- och mögelskador, flest skador påvisas i småhus. I småhusen är takets vindsutrymme den mest utsatta delen. Åtgärdskostnaden för fuktskadorna i drabbade småhus uppskattas till en kostnad om 91,2 miljarder kronor. Uppkomsten av problemen beror på många olika faktorer. Väder och klimat är av stor betydelse för hur ett hus utsätts för oönskad fukt. Nederbörd, luftfuktighet, temperatur, vindhastighet och vindriktning är några faktorer som är bidragande. Idag finns ett stort fokus på att bygga energisnåla hus medfört av allt hårdare krav om energiförbrukning. Sektorn för bostäder och service står för upp till 40 % av Sveriges totala energianvändning. I frågan om mer energisnåla byggnationer har nya idéer växt fram under åren, och ett typiskt exempel är lågenergihus. Lågenergihus är projekterade som täta och välisolerade hus i syfte att minska husets svinn av värmeenergi och därmed minskad energiåtgång för att vara i drift. Det debatteras flitigt om lågenergihus löper större risk att drabbas av fuktproblem än traditionella hus på grund av konstruktionens täthet och större mängd värmeisolering. Teoretiskt sett löper lågenergihus en större risk för att drabbas av fuktproblem i form av mikrobiell tillväxt men beroende på utformning och med hjälp av kunskap kan problemen undvikas. Kallvindar utgör ett vindsutrymme där klimatet i utrymmet liknar klimatet utomhus. Tidigare studier visar en trend att kallvindar har en ökad risk att utsättas för mögelsvamp på grund av fuktproblem. Ett lågenergihus med kallvind bör, enligt ovanstående, utgöra en stor risk att drabbas av fuktproblem. I denna studie har en fuktanalys genomförts av en kallvind i ett lågenergihus. Huset är placerat i Molkom, Värmland, och är relativt nybyggt. Målet med analysen var att undersöka om delar i kallvinden löpte risk att drabbas av fuktproblem i form av påväxt av mikroorganismer i relation till vädrets faktorer. Analysen utgjorde två separata metoder: en praktisk mätstudie där fuktmätare fästs i takstolarna inom kallvinden för att mäta fukthalt i takstolarna samt relativ luftfuktighet och temperatur i dess omgivning. I husets närhet placerades en väderstation i syfte att jämföra väderdata med data från mätare placerade i vindsutrymmet och hur vädret påverkar klimatet i vindsutrymmet. Väderstationen gav data för temperatur, luftfuktighet, nederbörd, vindhastighet och vindriktning utomhus. Den andre metoden var att utföra en värme- och fuktsimulering i programmet WUFI. I programmet genomfördes en simulering av kallvinden. Simuleringen presenterade fuktdata under samma tid som den praktiska studien avsett samt under kommande 5 år. Uppmätt data från mätare, väderstation och WUFI sammanställdes för att analyseras utifrån framtagna kritiska värden för mikrobiell tillväxt. Värden för faktorer som beaktades för att genomföra analysen och den slutliga bedömningen var: relativ luftfuktighet, temperatur och fukthalt i material. Ur studien framgår det att kallvinden inte utgör någon risk att drabbas av problem i samband med mögelsvampstillväxt trots kritiska värden under vissa perioder. Vädret visade sig att ha en stor inverkan på klimatet i vindsutrymmet. Den relativa luftfuktigheten i vindsutrymmet ökar då nederbörd förekommer samt när kraftiga, sydvästliga och sydliga vindar råder. Den relativa luftfuktigheten i vindsutrymmet ökar väsentligt då nederbörd sker i kombination med sydliga vindar. Då nederbörd förekommer sjunker temperaturen i vindsutrymmet. Temperaturen i vindsutrymmet visar inga tydliga samband med vindens riktning eller hastighet Fukthalten i takstolsvirket i vindsutrymmet ökar under nederbördsperioder samt när sydliga eller nordliga vindar råder. Vindens hastighet visar ingen påverkan för fukthalten. Den relativa luftfuktigheten i vindsutrymmet liknar den relativa luftfuktigheten utomhus. Temperaturen i vindsutrymmet liknar den temperatur som råder utomhus. Fukthalten i takstolarnas virke förhåller sig inte tydligt i samband med relativ fuktighet och temperatur utomhus.

Page generated in 0.0679 seconds