Carrier, spin, charge current, and spin current injection by one- and two-color optical schemes are investigated within 30-band k·p theory. Parameters of the band model are optimized to give full-Brillouin zone band structures for GaAs and Ge that give accurate Γ-point effective masses and gyromagnetic factors and give access to the L valley, and to the E₁ and E₁+Δ₁ critical points in the linear optical absorption. Calculations of one- and two-photon carrier and spin injection and two-color current injection are performed for excitation energies in the range of 0—4 eV in GaAs and 0—3.5 eV in Ge. Significant spin and spin current injection occurs with 30% spin polarization in GaAs and Ge at photon energy matching the E₁ critical point. Further, the anisotropy and disparity of the current injection between parallel and perpendicular linearly-polarized beam configurations are calculated. For light propagating along a <111> crystal axis, anisotropic contributions in coherent current control and two-photon spin injection give rise to normal current components and in-plane spin components. In Ge, contributions from the holes to spin, electrical current, and spin current injection are investigated. Optical orientation results in 83% spin-polarized holes at the band edge. The effects of carrier dynamics in Ge are treated within a rate-equation model. The detection of spin dynamics in a pump-probe setup is considered, and the Fermi-factor approach is justified for electrons but not for holes. Carrier and current injection are further investigated in single-layer and bilayer graphene within the tight-binding model. In single-layer graphene, the linear-circular dichroism in two-photon absorption yields an absorption coefficient that is twice as large for circularly polarized light compared to linearly polarized light. Coherent current injection is largest for co-circularly polarized beams and zero for cross-circularly polarized beams. For linearly polarized beams, the magnitude of the injected current is independent of beam polarizations. In contrast, the injected current in bilayer graphene shows disparity between parallel and perpendicular configurations of the beams. The resulting angular dependence of the current is a macroscopic, measurable consequence of interlayer coupling in the bilayer.

Résumé Dans la présente thèse, nous avons étudié la déformation anisotrope par bombardement ionique de nanoparticules d'or intégrées dans une matrice de silice amorphe ou d'arséniure d’aluminium cristallin. On s’est intéressé à la compréhension du mécanisme responsable de cette déformation pour lever toute ambigüité quant à l’explication de ce phénomène et pour avoir une interprétation consistante et unique. Un procédé hybride combinant la pulvérisation et le dépôt chimique en phase vapeur assisté par plasma a été utilisé pour la fabrication de couches nanocomposites Au/SiO2 sur des substrats de silice fondue. Des structures à couches simples et multiples ont été obtenues. Le chauffage pendant ou après le dépôt active l’agglomération des atomes d’Au et par conséquent favorise la croissance des nanoparticules. Les nanocomposites Au/AlAs ont été obtenus par implantation ionique de couches d’AlAs suivie de recuit thermique rapide. Les échantillons des deux nanocomposites refroidis avec de l’azote liquide ont été irradiés avec des faisceaux de Cu, de Si, d’Au ou d’In d’énergie allant de 2 à 40 MeV, aux fluences s'étendant de 1×1013 à 4×1015 ions/cm2, en utilisant le Tandem ou le Tandetron. Les propriétés structurales et morphologiques du nanocomposite Au/SiO2 sont extraites en utilisant des techniques optiques car la fréquence et la largeur de la résonance plasmon de surface dépendent de la forme et de la taille des nanoparticules, de leur concentration et de la distance qui les séparent ainsi que des propriétés diélectriques du matériau dans lequel les particules sont intégrées. La cristallinité de l’arséniure d’aluminium est étudiée par deux techniques: spectroscopie Raman et spectrométrie de rétrodiffusion Rutherford en mode canalisation (RBS/canalisation). La quantité d’Au dans les couches nanocomposites est déduite des résultats RBS. La distribution de taille et l’étude de la transformation de forme des nanoparticules métalliques dans les deux nanocomposites sont déterminées par microscopie électronique en transmission. Les résultats obtenus dans le cadre de ce travail ont fait l’objet de trois articles de revue. La première publication montre la possibilité de manipuler la position spectrale et la largeur de la bande d’absorption des nanoparticules d’or dans les nanocomposites Au/SiO2 en modifiant leur structure (forme, taille et distance entre particules). Les nanoparticules d’Au obtenues sont presque sphériques. La bande d’absorption plasmon de surface (PS) correspondante aux particules distantes est située à 520 nm. Lorsque la distance entre les particules est réduite, l’interaction dipolaire augmente ce qui élargit la bande de PS et la déplace vers le rouge (602 nm). Après irradiation ionique, les nanoparticules sphériques se transforment en ellipsoïdes alignés suivant la direction du faisceau. La bande d’absorption se divise en deux bandes : transversale et longitudinale. La bande correspondante au petit axe (transversale) est décalée vers le bleu et celle correspondante au grand axe (longitudinale) est décalée vers le rouge indiquant l’élongation des particules d’Au dans la direction du faisceau. Le deuxième article est consacré au rôle crucial de la déformation plastique de la matrice et à l’importance de la mobilité des atomes métalliques dans la déformation anisotrope des nanoparticules d’Au dans les nanocomposites Au/SiO2. Nos mesures montrent qu'une valeur seuil de 2 keV/nm (dans le pouvoir d'arrêt électronique) est nécessaire pour la déformation des nanoparticules d'or. Cette valeur est proche de celle requise pour la déformation de la silice. La mobilité des atomes d’Au lors du passage d’ions est confirmée par le calcul de la température dans les traces ioniques. Le troisième papier traite la tentative de formation et de déformation des nanoparticules d’Au dans une matrice d’arséniure d’aluminium cristallin connue pour sa haute résistance à l’amorphisation et à la déformation sous bombardement ionique. Le résultat principal de ce dernier article confirme le rôle essentiel de la matrice. Il s'avère que la déformation anisotrope du matériau environnant est indispensable pour la déformation des nanoparticules d’or. Les résultats expérimentaux mentionnés ci-haut et les calculs de températures dans les traces ioniques nous ont permis de proposer le scénario de déformation anisotrope des nanoparticules d’Au dans le nanocomposite Au/SiO2 suivant: - Chaque ion traversant la silice fait fondre brièvement un cylindre étroit autour de sa trajectoire formant ainsi une trace latente. Ceci a été confirmé par la valeur seuil du pouvoir d’arrêt électronique. - L’effet cumulatif des impacts de plusieurs ions conduit à la croissance anisotrope de la silice qui se contracte dans la direction du faisceau et s’allonge dans la direction perpendiculaire. Le modèle de chevauchement des traces ioniques (overlap en anglais) a été utilisé pour valider ce phénomène. - La déformation de la silice génère des contraintes qui agissent sur les nanoparticules dans les plans perpendiculaires à la trajectoire de l’ion. Afin d’accommoder ces contraintes les nanoparticules d’Au se déforment dans la direction du faisceau. - La déformation de l’or se produit lorsqu’il est traversé par un ion induisant la fusion d’un cylindre autour de sa trajectoire. La mobilité des atomes d’or a été confirmée par le calcul de la température équivalente à l’énergie déposée dans le matériau par les ions incidents. Le scénario ci-haut est compatible avec nos données expérimentales obtenues dans le cas du nanocomposite Au/SiO2. Il est appuyé par le fait que les nanoparticules d’Au ne se déforment pas lorsqu’elles sont intégrées dans l’AlAs résistant à la déformation. / Abstract In the present thesis, we study the anisotropic deformation of gold nanoparticles embedded in amorphous silica or crystalline aluminum arsenide, under ion bombardment. We try to comprehend the mechanism responsible for this deformation and to remove any ambiguity related to the explanation of this phenomenon. A hybrid process combining sputtering and plasma enhanced chemical vapour deposition was used to fabricate Au/SiO2 layers on fused silica substrates. Structures with single and multilayer were obtained. Heating during or after deposition activates the Au atom agglomeration and favours the growth of the nanoparticles. Also, a Au/AlAs nanocomposite was obtained by ion implantation of AlAs films, followed by rapid thermal annealing. The samples of the two nanocomposites, cooled with liquid nitrogen, were irradiated with 2 to 40 MeV Cu, Si, Au or In ion beams, at fluences ranging from 1×1013 to 4×1015 ions/cm2, using a Tandem or Tandetron accelerator. The structural and morphological properties of the Au/SiO2 nanocomposite were extracted by optical means; the frequency and the width of surface plasmon resonance band depend on the nanoparticle shape and size, their concentration, the inter-particle distance and the dielectric properties of material in which the particles are embedded. The aluminum arsenide crystallinity was studied by two techniques: Raman spectroscopy and Rutherford backscattering spectrometry in channelling configuration (RBS/ channelling). The Au concentration in the nanocomposite layers was deducted from RBS results. The size distribution and metallic nanoparticles shape transformation in both nanocomposites were observed by electronic transmission microscopy. The results obtained within the framework of this work are the subject of three journal papers. The first publication shows the possibility of manipulating the width and spectral position of the gold nanoparticle absorption band in Au/SiO2 nanocomposites by modifying their structure (form, size and inter-particle distance). The obtained Au nanoparticles are nearly spherical. The surface plasmon (PS) absorption band corresponding to the distant particles is located at 520 nm. After ion irradiation, the spherical nanoparticles transform into ellipsoids aligned along the ion beam. The absorption band splits into two bands: transversal and longitudinal. The band corresponding to the ellipsoids small axis (transversal) is blue-shifted and that corresponding to the long axis (longitudinal) is red-shifted indicating the elongation of particles in the beam direction. The second paper is consecrated to the crucial role of the plastic deformation of the matrix and to the importance of the metal atomic mobility in the anisotropic nanoparticles deformation in Au/SiO2 nanocomposites. Our measurements show that a threshold value of 2 keV/nm (electronic stopping power) is necessary for the deformation of Au nanoparticles. This value is close to that required for silica deformation. Mobility of the Au atoms at the time of the ion passage is confirmed by temperature calculation within the ionic track. The third paper treats the attempt of formation and deformation of Au nanoparticles in crystalline aluminum arsenide matrix known by its high resistance to amorphisation and deformation under ionic bombardment. The principal result of the last article confirms the essential role of the matrix. It proves that the anisotropic deformation of surrounding material is indispensable for gold nanoparticles deformation. The experimental results mentioned above and temperature calculations within ionic tracks allowed us to propose the following anisotropic deformation scenario of Au nanoparticles embedded in Au/SiO2 nanocomposite: - Each ion crossing the silica melts (very briefly) a narrow cylinder around its trajectory forming thus a latent track. This is consistent with the observed threshold value in the electronic stopping power. - The cumulative effect of many separate ion impacts leads to the anisotropic growth of the silica matrix which contracts in the direction of the beam and elongates in the perpendicular direction. The overlap model of the ionic tracks was used to validate this phenomenon. - The deformation of silica generates strains which act on the nanoparticles in the plane perpendicular to the ion trajectory. In order to accommodate these strains, the Au nanoparticles deform in the beam direction. - The deformation of nanoparticles occurs each time an ion traverses the gold particle and melts a cylinder around its trajectory. The mobility of the gold atoms was confirmed by a calculation of the equivalent temperature from the deposited energy in the material by incident ions. The scenario above is compatible with our experimental data obtained in the case of the Au/SiO2 nanocomposite. It is further supported by the fact that the Au nanoparticules do not deform when they are integrated in AlAs which is resistant to the deformation.

Diese Arbeit präsentiert die Ergebnisse einer Rastertunnelmikroskopiestudie an dem stöchiometrischen Supraleiter Lithium-Eisenarsenid (LiFeAs). Topographie- sowie Spektroskopieuntersuchungen an defektfreien Bereichen der Oberfläche zeigen eine Variation der Atompositionen in Abhängigkeit von der Tunnelspannung. Weiterhin wurde die Temperaturabhängigkeit der supraleitenden Energielücke untersucht. Dabei konnte die Signatur einer bosonischen Mode und damit eine Kopplung von Quasiteilchen beobachtet werden. Neben der Untersuchung defektfreier Oberflächen wurden auch Defekte und deren Einfluss auf die supraleitenden Eigenschaften analysiert. Es wurde dabei festgestellt, dass Defekte die supraleitende Energielücke ortsabhängig verändern. Die Defekte lassen sich aufgrund ihrer Symmetrie einer möglichen Gitterposition zuordnen. Eine detaillierte spektroskopische Untersuchung verschiedener Defekte zeigt deren Einfluss auf die Zustandsdichte der supraleitenden Quasiteilchen. Dabei stellt sich heraus, dass As-Defekte die supraleitende Energielücke erheblich beeinflussen. Fe-Defekte zeigen hingegen nur einen geringen Effekt. Für die Bestimmung der Ginzburg-Landau-Kohärenzlänge wurden Messungen im Magnetfeld durchgeführt. Hierfür wird in dieser Arbeit eine geeignete Näherungsfunktion hergeleitet. Die Näherung der differentiellen Leitfähigkeit bei U=0 V in einem Flussschlauch erlaubt die Bestimmung einer Kohärenzlänge von 3,9 nm. Dies entspricht einem oberen kritischen Feld von 21 Tesla. Neben der Bestimmung der Ginzburg-Landau-Kohärenzlänge wird auch eine Analyse des Flussschlauch-Gitters durchgeführt. Dabei zeigt sich, dass der Flussschlauch-Gitterabstand dem eines tetragonalen Gitters entspricht. Allerdings zeigt sich für Magnetfelder größer als 6 Tesla eine zunehmende Unordnung des Flussschlauch-Gitters, was auf eine stärker werdende Flussschlauch-Flussschlauch-Wechselwirkung hindeutet. / This work presents scanning tunneling microscopy and spectroscopy investigations on the stoichiometric superconductor lithium iron arsenide (LiFeAs). To reveal the electronic properties, measurements on defect-free surfaces as well as near defects have been performed. The former shows a shift of atomic position with respect to the applied bias voltage. Furthermore, temperature dependent spectroscopic measurements indicate the coupling of quasiparticles in the vicinity of the superconducting coherence peaks. LiFeAs surfaces influenced by atomic defects show a spacial variation of the superconducting gap. The defects can be characterized by their symmetry and thus can be assigned to a position in the atomic lattice. Detailed spectroscopic investigations of defects reveal their influence on the quasiparticle density of states. In particular, Fe-defects show a small effect on the superconductivity while As-defects strongly disturb the superconducting gap. Measurements in magnetic field have been performed for the determination of the Ginzburg-Landau coherence length . For this purpose, a suitable fit-function has been developed in this work. This function allows to fit the differential conductance of a magnetic vortex at U=0 V. The fit results in a coherence length of 3,9 nm which corresponds to an upper critical field of 21 Tesla. Besides measurements on a single vortex, investigation on the vortex lattice have been performed. The vortex lattice constant follows thereby the predicted behavior of a trigonal vortex lattice. However, for magnetic fields larger than 6 Tesla an increasing lattice disorder sets in, presumably due to vortex-vortex-interactions.

Polarization entangled photon pairs on demand are considered to be an important building block of quantum communication technology. It has been demonstrated that semiconductor quantum dots (QDs), which exhibit a certain spatial symmetry, can be used as a triggered, on-chip source of polarization entangled photon pairs. Due to limitations of the growth, the as-grown QDs usually do not exhibit the required symmetry, making the availability of post-growth tuning techniques essential. In this work first the QD-morphology of hundreds of QDs is correlated with the optical emission of neutral excitons confined in GaAs/AlGaAs QDs. It is presented how elastic anisotropic stress can be used to partially restore the symmetry of self-assembled GaAs/AlGaAs and InGaAs/GaAs QDs, making them as candidate sources of entangled photon pairs. As a consequence of the tuning of the QD-anisotropy we observe a rotation of the polarization of the emitted light. The joint modification of polarization orientation and QD anisotropy can be described by an anticrossing of the so-called bright excitonic states. Furthermore, it is demonstrated that anisotropic stress can be used to tune the purity of the hole states of the QDs by modifying the degree of heavy and light hole mixing. This ability might be interesting for applications using the hole spin as a so-called quantum bit.

Time-resolved Faraday rotation (TRFR) is a pulsed laser pump/probe optical measurement used to characterize electron spin dynamics in semiconductor materials. A Mach-Zehnder type interferometer with orthogonally polarized arms is presented as a device for TRFR measurement that is superior to optical bridge detection, the traditional measuring technique, since Faraday rotation can be passively optically amplified via interference. Operation of the interferometer is analyzed under ideal conditions. Corrections to the ideal case stemming from imperfectly aligned optics, finite polarization extinction ratios, and an imperfect recombination optic are analyzed using a matrix transformation approach. The design of the interferometer is presented and chronicled. A description of the single-beam active control system utilized to stabilize the interferometer by continuous corrections to the optical path length of one arm with a piezoelectric actuator is given. Optical amplification by increasing the power in either arm of the interferometer is demonstrated and TRFR measurements taken with the interferometer at ambient temperatures are compared with measurements taken with the optical bridge. We find the interferometer to offer a detection limit on the order of 50 mrad at room temperature, which is five times more sensitive than the optical bridge. Isolation and stabilization of the interferometer were also successful in reducing signal noise to a level comparable with the optical bridge. Our results demonstrate that the interferometer is a better detection device for Faraday rotation under ambient conditions. In the immediate future, improvements to the control system should be made and experiments should be performed with high-quality samples at cryogenic temperatures to confirm that the interferometer performs as favorably under those conditions.

Orientador: Fernando Iikawa / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin / Made available in DSpace on 2018-08-21T01:34:49Z (GMT). No. of bitstreams: 1 Girardi_TiagoIllipronti_M.pdf: 2091533 bytes, checksum: 1e5e58f3f5149c97c47c1bf44b7aa186 (MD5) Previous issue date: 2012 / Resumo: Neste trabalho, estudamos o efeito de diferentes condições de interface de InP/GaAs nas propriedades ópticas de pontos quânticos auto-organizados, crescidos por epitaxia de feixe químico, no modo Stranskii-Krastanov. Espera-se que os pontos quânticos de InP/GaAs apresentem alinhamento de bandas do tipo II, e somente os elétrons ficam confinados, enquanto os buracos ficam localizados nas camadas de GaAs em volta do ponto quântico, atraídos pelo elétron. No entanto, devido ao efeito de mistura de átomos nas interfaces o perfil de potencial nas interfaces pode ser alterado significativamente, afetando, com isso, as propriedades ópticas dos pontos quânticos. Foram estudadas amostras com as seguintes condições de interface entre a camada de InP e as camadas de GaAs: inclusão ou não de uma camada de InGaP em uma ou nas duas interfaces. O InGaP gera uma barreira para ambos os tipos de portadores de carga em uma junção tanto com o GaAs como InP e evita a difusa de As das camadas de GaAs para a de InP. Através de medidas de fotoluminescência resolvida no tempo, observamos a variação do tempo de decaimento da emissão óptica associada aos pontos quânticos de acordo com as diferentes condições de interface. Foi observado um tempo curto de decaimento em amostras sem a inclusão de InGaP e com a inclusão apenas na interface superior, enquanto foi observado um tempo longo quando incluímos camadas de InGaP em ambas as interfaces. O tempo de decaimento curto é incompatível com o alinhamento de bandas do tipo II, que deveria separar espacialmente o elétron do buraco. A partir desses resultados e estudos anteriores a esse trabalho, pudemos concluir que o tempo curto se deve à mistura de átomos nas regiões de ambas as interfaces, gerando ligas que localizam os portadores próximos um ao outro. O tempo longo na amostra contendo InGaP nas duas interfaces é atribuído à separação espacial do elétron e do buraco. O efeito de mistura de átomos nas interfaces, neste caso, não forma uma liga na interface que localize os dois tipos de portadores próximos um ao outro. Isso pode ser uma alternativa de preparação de pontos quânticos de InP/GaAs onde se mantém separados espacialmente o elétron e o buraco / Abstract: We studied the effect of different interface conditions on the optical properties of InP/GaAs self-assembled quantum dots grown by chemical beam epitaxy in the Stranskii-Krastanov mode. InP/GaAs quantum dots is expected to present type II band alignment, and only electrons are confined, whereas the holes are localized in the GaAs layers around the quantum dot, attracted by the electron. However, due to the atomic intermixing effect in the interface the potential profile can be strongly changed, affecting the optical properties of the quantum dots. We studied samples with the following conditions at the interfaces between the InP layer and GaAs layers: the inclusion, or the lack of, a InGaP layer at one of or both interfaces. InGaP generates a barrier for both types of carriers in a junction with GaAs and InP, and avoid the diffusion of As from the GaAs layers to the InP one. Using time-resolved photo-luminescence, we observed a change of the optical emission decay times associated to the quantum dots as the interface condition is changed. We observed a short decay lifetime in samples without InGaP layers and with the inclusion in the top interface only, whereas we observed a long decay time when we included InGaP layers in both interfaces. The short decay lifetime is incompatible with the type II band alignment, where the electron and the hole should be spatially separated. Using these and other previous results, we concluded that the short decay lifetime is due to the atomic intermixing in both interfaces regions, forming alloys that localize the carriers near each other. The long lifetime observed for sample containing InGaP in both interfaces is attributed to the large electron-hole spatial separation. In this case intermixing effects at the interfaces do not form a potential well to localize the carries near each other / Mestrado / Física / Mestre em Física

Time-resolved Faraday rotation (TRFR) is a pulsed laser pump/probe optical measurement used to characterize electron spin dynamics in semiconductor materials. A Mach-Zehnder type interferometer with orthogonally polarized arms is presented as a device for TRFR measurement that is superior to optical bridge detection, the traditional measuring technique, since Faraday rotation can be passively optically amplified via interference. Operation of the interferometer is analyzed under ideal conditions. Corrections to the ideal case stemming from imperfectly aligned optics, finite polarization extinction ratios, and an imperfect recombination optic are analyzed using a matrix transformation approach. The design of the interferometer is presented and chronicled. A description of the single-beam active control system utilized to stabilize the interferometer by continuous corrections to the optical path length of one arm with a piezoelectric actuator is given. Optical amplification by increasing the power in either arm of the interferometer is demonstrated and TRFR measurements taken with the interferometer at ambient temperatures are compared with measurements taken with the optical bridge. We find the interferometer to offer a detection limit on the order of 50 mrad at room temperature, which is five times more sensitive than the optical bridge. Isolation and stabilization of the interferometer were also successful in reducing signal noise to a level comparable with the optical bridge. Our results demonstrate that the interferometer is a better detection device for Faraday rotation under ambient conditions. In the immediate future, improvements to the control system should be made and experiments should be performed with high-quality samples at cryogenic temperatures to confirm that the interferometer performs as favorably under those conditions.

Physical systems having dimensions smaller than, or of the same order of magnitude as, the characteristic length scale relevant to a physical property are referred to as mesoscopic physical systems. Due to the dimensions of the system, several physical properties get affected and this could reveal interesting physics which would other-wise have not been apparent. In the recent times, a lot interesting applications have resulted from such studies. The fundamental length scale in ferromagnetic systems is the exchange length. It is related to the magnetic anisotropy and exchange constants. Other length scales such as the size of a magnetic domain or a domain wall depends on the minimisation of energy associated with this length scale along with other factors such as zeeman energy, magnetostatic, magnetoelastic and anisotropy energies. Ultrathin magnetic films have thickness smaller than the exchange length. In this thickness regime, the surface of the film plays an important role. The magnetic anisotropy energy would get a significant contribution from the surface of the film and if it dominates over the volume contribution, would eventually lead to magnetisation pointing out of the plane of the film as opposed to imposition of demagnetising fields. Examples for such cases are FePt(L10 phase) films and Co(0001) films. Such films are important in memory applications where perpendicularly magnetised recording media are desired. When the lateral dimensions of thin films are reduced, demagnetising fields become even more important. Depending on the anisotropy in the system, certain domain patterns get stabilised in the final structure. This has led to important applications in the field of magnonics. The use of angular momentum transfer from spin polarised electrons to change the configuration of magnetisation of structured magnetic films has led to interesting memory and oscillator applications. The underlying physical parameter that needs to be controlled and carefully studied in all these cases is the magnetic anisotropy. It is favourable to have uniaxial magnetic anisotropy for memory and oscillators. This thesis chiefly deals with Fe/GaAs(001) systems. The choice of the physical system follows interest in spintronics where spin injection is desired into a semiconductor from a ferromagnet. The thesis is organized into chapters as follows. Chapter 1 attempts to introduce the reader to some of the basic concepts of mag-netism and some magnetic phenomena. The characteristic nature of a ferro-magnetic material is its spontaneous magnetisation due to long range ordering below the Curie temperature. But the moment is coupled, through some in-teractions, to spatial co-ordinates which leads to spatial variation of magnetic properties. Such interactions are also responsible for the formation of magnetic domains. The spatial variation of magnetic properties within a ferromagnet is called magnetic anisotropy. A major part of the thesis deals with the study of magnetic anisotropy of Fe thin films grown on GaAs(001) substrates. For a better understanding, the structure of the semiconductor is introduced first before discussing the influence of the structure of GaAs on the growth of Fe. A short description of the uniaxial magnetic anisotropy in Fe films is given before starting on an exploration of some possible reasons for it. Concepts of ferromagnetic resonance, spin torque effect and micromagnetic simulations are given. Chapter 2 gives a brief description of some of the experimental apparatus that was setup during the course of the research along with an overview of the differ-ent sample preparation and characterisation techniques used. The chapter is organised according to the general functionality of the techniques. Some con-cepts such as the use of low energy electrons, nanostructuring etc are introduced along with the corresponding techniques since it is best understood along with the instrumentation. Chapter 3 reports some surprising findings about the in-plane magnetic anisotropy in Fe films grown on an MgO underlayer. Until now, it has been understood that such films should exhibit only a four-fold magnetic anisotropy within the plane of the film. But the Fe/MgO/GaAs(001) films studied here exhibited an in-plane uniaxial magnetic anisotropy(IPUMA). IPUMA is dominant upto about 25 ML of Fe in case of Fe/MgO/GaAs(001) films whereas, in Fe/GaAs(001) films it is dominant only upto about 15 ML. Thus, the presence of the MgO film even appeared to enhance the uniaxial anisotropy as compared to the Fe/GaAs(001) films. In the ferromagnetic resonance (FMR) spectra, as many as three peaks were observed in Fe/GaAs(001) films of thickness 50 ML close to the hard axis of magnetisation. This means that three could be three energy minima possibly due to a competition between the anisotropies involved. Chapter 4 elaborates the investigations of the effect of orientation and doping con-centration of the GaAs substrate on the magnetic anisotropy of Fe/GaAs(001) films. It is found that doping the substrate (n type) reduces the strength of the IPUMA in Fe/GaAs films. In the wake of the long-standing debate of electronic structure v/s stress as the origin of the IPUMA in Ferromagnet/Semiconductor films, this result is important because it implies that the electronic structure of the Fe/GaAs interface influences the magnetic anisotropy. But stress, as a cause of IPUMA cannot be ruled out. The influence of deposition techniques on magnetic anisotropy is also investigated. Chapter 5 presents a way of manipulating magnetic anisotropy, and hence mag-netisation dynamics, by nanostructuring of epitaxial Fe films. It is based on the property that magnetic anisotropy of Fe films is thickness dependent. It is demonstrated that using techniques of nanostructuring, a 2 dimensional mag-netic system with controllable variation of local magnetic anisotropy is created. Such a system could be a potential magnonic crystal. chapter 6 demonstrates the proof of concept of a new memory device where memory is stored in the magnetic domain configuration of a ring in relation to that of a nano-wire. Switching between the memory states is acheived through spin trasfer torque of an electric current passing through the device, whereas read-out of the memory state is through the measurement of resistance of the device. Devices are made using NiFe and Co; it is seen that the behaviour of the devices can be explained taking into account the anisotropic magnetoresistance of the material used. Finally, the various results are summarised and a broad outlook is given. Some possible future research related to the topics dealt within this thesis is discussed.

Tato diplomová práce se zabývá přípravou nanostruktur z indium arsenidu (InAs) pomocí metody molekulární svazkové epitaxe (MBE). Důraz je kladen na výrobu struktur ve formě nanodrátů na křemíkovém substrátu. V úvodní části práce je popsána motivace pro studium III-V polovodičů a konkrétně InAs. Následující kapitoly vysvětlují dva základní princpy tvorby nanodrátů. Experimentální část práce diskutuje možnost přípravy indiového katalyzátoru pro samokatalyzovaný růst InAs nanodrátů v konkrétní aparatuře MBE. Následuje prezentace výsledků růstu InAs nanodrátů mechanismem selektivní epitaxe (SAE). Nanodráty byly vyrobeny na substrátu s termálně dekomponovaným oxidem a rovněž na substrátech s litograficky připravenou oxidovou maskou.

Polarization entangled photon pairs on demand are considered to be an important building block of quantum communication technology. It has been demonstrated that semiconductor quantum dots (QDs), which exhibit a certain spatial symmetry, can be used as a triggered, on-chip source of polarization entangled photon pairs. Due to limitations of the growth, the as-grown QDs usually do not exhibit the required symmetry, making the availability of post-growth tuning techniques essential. In this work first the QD-morphology of hundreds of QDs is correlated with the optical emission of neutral excitons confined in GaAs/AlGaAs QDs. It is presented how elastic anisotropic stress can be used to partially restore the symmetry of self-assembled GaAs/AlGaAs and InGaAs/GaAs QDs, making them as candidate sources of entangled photon pairs. As a consequence of the tuning of the QD-anisotropy we observe a rotation of the polarization of the emitted light. The joint modification of polarization orientation and QD anisotropy can be described by an anticrossing of the so-called bright excitonic states. Furthermore, it is demonstrated that anisotropic stress can be used to tune the purity of the hole states of the QDs by modifying the degree of heavy and light hole mixing. This ability might be interesting for applications using the hole spin as a so-called quantum bit.