Global ETD Search

1	Investigation For Natural Extract Inhibitors Of Bovine Lens Aldose Reductase Responsible For The Formation Of Diabetis Dependent Cataract Onay, Melih 01 August 2008 (has links) (PDF) In the polyol pathway, Aldose reductase (AR) is an important enzyme in reduction of aldehydes and aldosugars to their suitable alcohols. AR, using NADPH as a coenzyme, has a molecular weight of 37 000 dalton. AR in its activated form, known to increase the sorbitol accumulation in lens, is responsible for the cataract formation in diabetis diseases. Therefore, the inhibition of aldose reductase is important to prevent the incedence of cataract formation in diabetus mellitus. In the treatment of diabetis dependent cataract, chemically synthetized drugs were sometimes less than beneficial due to the severe side effects they cause. Recently a huge amount of study has been intensified on developing new drugs from natural compounds and even by utilizing plant extracts for their easily metabolizing polyphenolic compounds. In this study, BLAR, source of enzyme, was obtained as crude via differential centrifugation and ammonium sulfate precipitation. The enzyme assay conditions were optimized for the protein, substrate, coenzyme, and salt concentrations, also for the effects of pH and temperature. Ocimum basilicum, Lavandula stoechas, Melissa officinalis, Glycyrrhiza glabra L. and Tilia tomentosa were selected as commonly used alternative medicine plants. Plant extracts were prepared in ethanol and ethyl acetate and their inhibitory effects were tested on crude bovin lens aldose reductase enzyme. Fifty percent inhibitory concentrations (IC50) were found between values of 25.53 &micro / g/mL and 54.15 &micro / g/mL for ethanol extracts and between 41.55 &micro / g/mL and 82.96 &micro / g/mL for the ethyl acetate extracts of selected plants. In addition, the plant extracts were also characterized for their antioxidant activities by of 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging method and test of total phenolic content (TPC) . QD Biochemistry 415-436
2	Inhibitiory Effects Of Plant Originated Extracts On Bovine Lens Aldose Reductase Zaimoglu, Selin 01 June 2004 (has links) (PDF) Aldose reductase, E.C.1.1.1.21, catalyzes the reduction of different types of aldehydes to their corresponding alcohols, and especially reduces various aldo-sugars using NADPH as the coenzyme. Under hyperglycemic conditions aldose reductase is involved in the development of diabetic complications. As a result, interest has been placed over the years on the development of potent aldose reductase inhibitors for possible use in the therapy of these severe diabetic complications. In this study, aldose reductase was isolated from bovine lens by differential centrifugation and ammonium sulfate precipitation. The conditions for the enzyme assay / such as substrate (DL-Glyceraldehyde) and coenzyme (NADPH) concentration, protein amount, effect of sulfate ions, temperature and pH on the enzyme activity were optimized. The inhibitory effects of Punica granatum, Spinacia olaeracea, Allium cepa Allium porrum, Malus flouribunda, Malus domestica extracts were tested on crude bovine lens aldose reductase. Four different types of organic fractions from each crude plant extract were obtained by solvent fractionation. The inhibitory activity of these organic fractions was calculated considering the aldose reductase activity without extracts as 100 %. All six plants were found to inhibit aldose reductase activity to different extent. Among these fractions obtained as / petroleum ether, diethyl ether, ethyl acetate, and n-butanol. Highest inhibitory activity was found for the ethyl acetate fraction. The IC50 values of ethyl acetate fractions of all these plants was calculated as, 25.46 &micro / g/ml, 20.5 &micro / g/ml, 18.5 &micro / g/ml, 12.32 &micro / g/ml, 6.45 &micro / g/ml, 5.4 &micro / g/ml, for Allium porrum, Malus domestica, Spinacia olaeracea, Malus floribunda Allium cepa, Punica granatum respectively. Q Research 179.9-180
3	Protein Kinase C Activation in Hyperglycemic Bovine Lens Epithelial Cells Fan, Wen-Lin 12 1900 (has links) This study demonstrates the presence of protein kinase C activity in both cytosolic and membrane fractions of bovine lens epithelial cells in culture. Protein kinase C activity is similar in normal and hyperglycemic cells. Furthermore, the ability of the enzyme to translocate from the cytosol to the membrane following phorbol ester treatment is unimpeded by hyperglycemic conditions. Moreover, protein kinase C activation had no effect on myoinositol uptake either in normal cells or in cells exposed to hyperglycemic conditions. protein kinase C activity cytosolic fractions membrane fractions bovine lens epithelial cells Protein kinase C. Epithelial cells. Hyperglycemia.
4	A Fully Customizable Anatomically Correct Model of the Crystalline Lens Wilson, Cynthia Nicole 04 August 2011 (has links) The human eye is a complex optical system comprised of many components. The crystalline lens, an optical component with a gradient index (GRIN), is perhaps the least understood as it is situated inside the eye and as a result is difficult to characterize. Its complex nonlinear structure is not easily measured and consequently not easily modeled. Presently several models of the GRIN structure exist describing the average performance of crystalline lenses. These models, however, do not accurately describe the performance of crystalline lenses on an individual basis and a more accurate individual eye model based on anatomical parameters is needed. This thesis proposes an anatomically correct, individually customizable crystalline lens model. This is an important tool and is needed both for research on the optical properties of human eyes and to diagnose and plan the treatment of optically based visual problems, such as refractive surgery planning. The lens model consisted of an interior GRIN with a constant refractive index core. The anterior and posterior surface was described by conic sections. To realize this eye model, the optical and biometric properties of mammalian lenses were measured and the correlation relationships between these measurements were used to simplify the model down to one fitting parameter which controls the shape of the GRIN. Using this data, an anatomically correct individualizable model of the lens was successfully realized with varying parameters unique to each lens. Using this customizable lens model, customizable human eye models based on measurements of the entire human eye can be realized. physiological optics optics eye human eye crystalline lens crystalline lens model eye model optical model gradient index aberration bovine lens porcine lens rabbit lens crystalline lens measurement
5	A Fully Customizable Anatomically Correct Model of the Crystalline Lens Wilson, Cynthia Nicole 04 August 2011 (has links) The human eye is a complex optical system comprised of many components. The crystalline lens, an optical component with a gradient index (GRIN), is perhaps the least understood as it is situated inside the eye and as a result is difficult to characterize. Its complex nonlinear structure is not easily measured and consequently not easily modeled. Presently several models of the GRIN structure exist describing the average performance of crystalline lenses. These models, however, do not accurately describe the performance of crystalline lenses on an individual basis and a more accurate individual eye model based on anatomical parameters is needed. This thesis proposes an anatomically correct, individually customizable crystalline lens model. This is an important tool and is needed both for research on the optical properties of human eyes and to diagnose and plan the treatment of optically based visual problems, such as refractive surgery planning. The lens model consisted of an interior GRIN with a constant refractive index core. The anterior and posterior surface was described by conic sections. To realize this eye model, the optical and biometric properties of mammalian lenses were measured and the correlation relationships between these measurements were used to simplify the model down to one fitting parameter which controls the shape of the GRIN. Using this data, an anatomically correct individualizable model of the lens was successfully realized with varying parameters unique to each lens. Using this customizable lens model, customizable human eye models based on measurements of the entire human eye can be realized. physiological optics optics eye human eye crystalline lens crystalline lens model eye model optical model gradient index aberration bovine lens porcine lens rabbit lens crystalline lens measurement
6	A Fully Customizable Anatomically Correct Model of the Crystalline Lens Wilson, Cynthia Nicole 04 August 2011 (has links) The human eye is a complex optical system comprised of many components. The crystalline lens, an optical component with a gradient index (GRIN), is perhaps the least understood as it is situated inside the eye and as a result is difficult to characterize. Its complex nonlinear structure is not easily measured and consequently not easily modeled. Presently several models of the GRIN structure exist describing the average performance of crystalline lenses. These models, however, do not accurately describe the performance of crystalline lenses on an individual basis and a more accurate individual eye model based on anatomical parameters is needed. This thesis proposes an anatomically correct, individually customizable crystalline lens model. This is an important tool and is needed both for research on the optical properties of human eyes and to diagnose and plan the treatment of optically based visual problems, such as refractive surgery planning. The lens model consisted of an interior GRIN with a constant refractive index core. The anterior and posterior surface was described by conic sections. To realize this eye model, the optical and biometric properties of mammalian lenses were measured and the correlation relationships between these measurements were used to simplify the model down to one fitting parameter which controls the shape of the GRIN. Using this data, an anatomically correct individualizable model of the lens was successfully realized with varying parameters unique to each lens. Using this customizable lens model, customizable human eye models based on measurements of the entire human eye can be realized. physiological optics optics eye human eye crystalline lens crystalline lens model eye model optical model gradient index aberration bovine lens porcine lens rabbit lens crystalline lens measurement
7	A Fully Customizable Anatomically Correct Model of the Crystalline Lens Wilson, Cynthia Nicole January 2011 (has links) The human eye is a complex optical system comprised of many components. The crystalline lens, an optical component with a gradient index (GRIN), is perhaps the least understood as it is situated inside the eye and as a result is difficult to characterize. Its complex nonlinear structure is not easily measured and consequently not easily modeled. Presently several models of the GRIN structure exist describing the average performance of crystalline lenses. These models, however, do not accurately describe the performance of crystalline lenses on an individual basis and a more accurate individual eye model based on anatomical parameters is needed. This thesis proposes an anatomically correct, individually customizable crystalline lens model. This is an important tool and is needed both for research on the optical properties of human eyes and to diagnose and plan the treatment of optically based visual problems, such as refractive surgery planning. The lens model consisted of an interior GRIN with a constant refractive index core. The anterior and posterior surface was described by conic sections. To realize this eye model, the optical and biometric properties of mammalian lenses were measured and the correlation relationships between these measurements were used to simplify the model down to one fitting parameter which controls the shape of the GRIN. Using this data, an anatomically correct individualizable model of the lens was successfully realized with varying parameters unique to each lens. Using this customizable lens model, customizable human eye models based on measurements of the entire human eye can be realized. physiological optics optics eye human eye crystalline lens crystalline lens model eye model optical model gradient index aberration bovine lens porcine lens rabbit lens crystalline lens measurement
8	Development of Sensitive In Vitro Assays to Assess the Ocular Toxicity Potential of Chemicals and Ophthalmic Products McCanna, David January 2009 (has links) The utilization of in vitro tests with a tiered testing strategy for detection of mild ocular irritants can reduce the use of animals for testing, provide mechanistic data on toxic effects, and reduce the uncertainty associated with dose selection for clinical trials. The first section of this thesis describes how in vitro methods can be used to improve the prediction of the toxicity of chemicals and ophthalmic products. The proper utilization of in vitro methods can accurately predict toxic threshold levels and reduce animal use in product development. Sections two, three and four describe the development of new sensitive in vitro methods for predicting ocular toxicity. Maintaining the barrier function of the cornea is critical for the prevention of the penetration of infections microorganisms and irritating chemicals into the eye. Chapter 2 describes the development of a method for assessing the effects of chemicals on tight junctions using a human corneal epithelial and canine kidney epithelial cell line. In Chapter 3 a method that uses a primary organ culture for assessing single instillation and multiple instillation toxic effects is described. The ScanTox system was shown to be an ideal system to monitor the toxic effects over time as multiple readings can be taken of treated bovine lenses using the nondestructive method of assessing for the lens optical quality. Confirmations of toxic effects were made with the utilization of the viability dye alamarBlue. Chapter 4 describes the development of sensitive in vitro assays for detecting ocular toxicity by measuring the effects of chemicals on the mitochondrial integrity of bovine cornea, bovine lens epithelium and corneal epithelial cells, using fluorescent dyes. The goal of this research was to develop an in vitro test battery that can be used to accurately predict the ocular toxicity of new chemicals and ophthalmic formulations. By comparing the toxicity seen in vivo animals and humans with the toxicity response in these new in vitro methods, it was demonstrated that these in vitro methods can be utilized in a tiered testing strategy in the development of new chemicals and ophthalmic formulations. in vitro Alternative Methods alamarBlue rhodamine tight junctions bovine lens viability toxicity mitochondria mitochondria integrity benzalkonium chloride sodium dodecyl sulphate sodium lauryl sulfate scanning electron microscopy Draize Draize maximal average scores zonula occludens cosmetic directive PETA humane society animal league ICCVAM ECVAM JaCVAM BCOP bovine cornea ocular irritants ocular irritation ocular toxicity human corneal epithelial cells vitro confocal confocal microscopy metabolic activity optical quality reactive oxygen species contact lens contact lens care solutions barrier function microbial keratitis mulitipurpose solutions tight junction cell damage claudin ZO-1 occludin MDCK Madin Madin-Darby canine kidney cells cornea human cornea human corneal epithelium epithelial cell line human corneal epithelial cell line sodium fluorescein sodium fluorescein permeability fluorescein permeability ocular surface cell monolayer Araki-Sasaki cell physiology risk assessment safety assessment ScanTox scanning laser lens epithelium corneal cells in vitro model ophthalmic formulations multiple instillation back vertex animal testing rabbit testing alternatives to animal testing cultured bovine lens toxicity of chemicals irritation irritants laser scanner organ culture delayed toxicity toxins hydrogen peroxide cornea toxicity cornea toxicity models prediction of human toxicity no observable adverse effect level lowest observable adverse effect level NOAEL LOAEL toxicity thresholds safety factors cornea uncertainty factors preservatives disinfectants ophthalmic products preclinical preclinical testing epithelial barrier drug penetration clinical confocal microscopy animal rights rabbit cornea human cornea human clinical effects toxic animal rights activist sensitive measures toxic effect toxicity threshold agar overlay agar diffusion agar overlay method agar diffusion method cytochrome cytochrome c apoptosis necrotic apoptotic necrosis caspase rhodamine 123 resazuran resorufin cell death cell viability metabolic dye microsomal microsomal enzymes cytotoxicity cytotoxic cytotoxic effect MTT XTT WST-1 plasma membrane mitochondrial mitochondrial morphology ocular toxicity potential ocular toxicity human corneal epithelial cell line confocal analysis corneal epithelium cell fluorescence alamarBlue assay rhodamine dye animal welfare toxic injury degraded mitochondria epithelial monolayer disinfectants membrane integrity eye toxicity eye viability dye toxicity in humans human toxicity effects on the mitochondria mitochondrial toxicity in vitro battery in vitro test battery ophthalmic eye drop direct contact product safety cytotoxicity potential molecular molecular biology refine reduce replace sensitivity and relevance sensitivity relevance rabbit ocular irritation test product development cytotoxicity models cytotoxicity alternative methods replacements for animal testing three r's beagle tiered testing tiered testing strategy replacements animal testing mechanistic toxicity cornea mitochondria dose response threshold Vision Science and Biology
9	Development of Sensitive In Vitro Assays to Assess the Ocular Toxicity Potential of Chemicals and Ophthalmic Products McCanna, David January 2009 (has links) The utilization of in vitro tests with a tiered testing strategy for detection of mild ocular irritants can reduce the use of animals for testing, provide mechanistic data on toxic effects, and reduce the uncertainty associated with dose selection for clinical trials. The first section of this thesis describes how in vitro methods can be used to improve the prediction of the toxicity of chemicals and ophthalmic products. The proper utilization of in vitro methods can accurately predict toxic threshold levels and reduce animal use in product development. Sections two, three and four describe the development of new sensitive in vitro methods for predicting ocular toxicity. Maintaining the barrier function of the cornea is critical for the prevention of the penetration of infections microorganisms and irritating chemicals into the eye. Chapter 2 describes the development of a method for assessing the effects of chemicals on tight junctions using a human corneal epithelial and canine kidney epithelial cell line. In Chapter 3 a method that uses a primary organ culture for assessing single instillation and multiple instillation toxic effects is described. The ScanTox system was shown to be an ideal system to monitor the toxic effects over time as multiple readings can be taken of treated bovine lenses using the nondestructive method of assessing for the lens optical quality. Confirmations of toxic effects were made with the utilization of the viability dye alamarBlue. Chapter 4 describes the development of sensitive in vitro assays for detecting ocular toxicity by measuring the effects of chemicals on the mitochondrial integrity of bovine cornea, bovine lens epithelium and corneal epithelial cells, using fluorescent dyes. The goal of this research was to develop an in vitro test battery that can be used to accurately predict the ocular toxicity of new chemicals and ophthalmic formulations. By comparing the toxicity seen in vivo animals and humans with the toxicity response in these new in vitro methods, it was demonstrated that these in vitro methods can be utilized in a tiered testing strategy in the development of new chemicals and ophthalmic formulations. in vitro Alternative Methods alamarBlue rhodamine tight junctions bovine lens viability toxicity mitochondria mitochondria integrity benzalkonium chloride sodium dodecyl sulphate sodium lauryl sulfate scanning electron microscopy Draize Draize maximal average scores zonula occludens cosmetic directive PETA humane society animal league ICCVAM ECVAM JaCVAM BCOP bovine cornea ocular irritants ocular irritation ocular toxicity human corneal epithelial cells vitro confocal confocal microscopy metabolic activity optical quality reactive oxygen species contact lens contact lens care solutions barrier function microbial keratitis mulitipurpose solutions tight junction cell damage claudin ZO-1 occludin MDCK Madin Madin-Darby canine kidney cells cornea human cornea human corneal epithelium epithelial cell line human corneal epithelial cell line sodium fluorescein sodium fluorescein permeability fluorescein permeability ocular surface cell monolayer Araki-Sasaki cell physiology risk assessment safety assessment ScanTox scanning laser lens epithelium corneal cells in vitro model ophthalmic formulations multiple instillation back vertex animal testing rabbit testing alternatives to animal testing cultured bovine lens toxicity of chemicals irritation irritants laser scanner organ culture delayed toxicity toxins hydrogen peroxide cornea toxicity cornea toxicity models prediction of human toxicity no observable adverse effect level lowest observable adverse effect level NOAEL LOAEL toxicity thresholds safety factors cornea uncertainty factors preservatives disinfectants ophthalmic products preclinical preclinical testing epithelial barrier drug penetration clinical confocal microscopy animal rights rabbit cornea human cornea human clinical effects toxic animal rights activist sensitive measures toxic effect toxicity threshold agar overlay agar diffusion agar overlay method agar diffusion method cytochrome cytochrome c apoptosis necrotic apoptotic necrosis caspase rhodamine 123 resazuran resorufin cell death cell viability metabolic dye microsomal microsomal enzymes cytotoxicity cytotoxic cytotoxic effect MTT XTT WST-1 plasma membrane mitochondrial mitochondrial morphology ocular toxicity potential ocular toxicity human corneal epithelial cell line confocal analysis corneal epithelium cell fluorescence alamarBlue assay rhodamine dye animal welfare toxic injury degraded mitochondria epithelial monolayer disinfectants membrane integrity eye toxicity eye viability dye toxicity in humans human toxicity effects on the mitochondria mitochondrial toxicity in vitro battery in vitro test battery ophthalmic eye drop direct contact product safety cytotoxicity potential molecular molecular biology refine reduce replace sensitivity and relevance sensitivity relevance rabbit ocular irritation test product development cytotoxicity models cytotoxicity alternative methods replacements for animal testing three r's beagle tiered testing tiered testing strategy replacements animal testing mechanistic toxicity cornea mitochondria dose response threshold Vision Science and Biology

Search results