1 |
Light scattering for analysis of thermal stress induced deformation in thin metal filmsKylner, Carina January 1997 (has links)
Today, thin film based devices are found in a wide field of applications. The main reasons are that thin film technology enables access to unique physical properties and possibilities to miniaturize devices. Thin film devices are generally described in terms such as electrical, optical and magnetical properties. However, the lifetime of these devices is often limited by mechanical stresses causing plastic deformation. An effect of the plastic deformation is hillocking where isolated features are created on the film surface. The continual need to improve performance, reduce size as well as cost is pushing thin film structures close to or beyond present fundamental understanding. Further progress requires better understanding of basic phenomena where analytical methods for characterization of thin film deformation play a crucial role. To follow the initial hillock formation during thermal treatments it is essential to have a suitable tool for achieving real-time measurements with high sensitivity over a relatively large area that does not considerably affect the film surface. Methods based on light scattering are generally very sensitive to changes in the surface topography and allow contact free measurements at high speed. In this thesis light scattering methods are investigated as tools for stress analysis of thin metal films. Detection and characterization of isolated surface features using angular resolved scattering has been investigated by simulations. Results were used in development of an optical instrument for simultaneous measurements of initial hillocking and changes in overall film stress. The instrument combines light scattering and laser beam deflection techniques. It is shown how the onset of initial hillocking in aluminum films is accompanied by stress relaxation. Real-time dark field microscopy was demonstrated as a technique for analysis of the lateral hillock distribution. Analysis of the distribution show clustering of hillocks which is supposed to be related to the microstructure of the film. It is demonstrated that copper inclusion can be used to strengthen aluminum films to withstand higher stress before hillocking occurs. The copper content also reduces the grain size and thereby the surface roughness, which results in good or even better optical performance than for pure aluminum films. / <p>NR 20140805</p>
|
2 |
Calidad óptica del ojo humano en función de la edadGuirao Piñera, Antonio 17 December 1998 (has links)
Se ha estudiado la calidad óptica del ojo en función de la edad para entender mejor el envejecimiento del sistema visual humano. Se ha construido un sistema experimental de registro de imágenes, adaptado a un entorno clínico, para medir la función de transferencia (MTF) ocular, y se ha desarrollado un procedimiento computacional para obtener las aberraciones ópticas de la córnea. Se han realizado medidas en una población de 60 sujetos distribuidos en tres grupos de edad (20-30 años, 40-50 años y 60-70 años), y en un grupo de pacientes implantados con lente intraocular. La MTF media ocular empeora de cada grupo de edad al siguiente, y las aberraciones corneales tienden a aumentar. La calidad óptica del ojo humano se reduce progresivamente con la edad; la córnea es parcialmente responsable de esa reducción. La calidad óptica en pacientes con lente intraocular es similar a la media de los sujetos mayores normales. / The optical quality of the eye was studied as a function of age to better understand the aging process in the human visual system. An experimental imaging system, adapted to a clinical environment, was constructed to measure the ocular modulation transfer function (MTF). A computational procedure was developed to obtain the optical aberrations of the cornea. Measurements were performed in a population of 60 subjects within three age groups (20-30 years, 40-50 years, and 60-70 years), and in a group of 20 patients implanted with intraocular lenses. The average MTF declines as age increases from young to middle and older groups. Corneal aberrations tends to increase with age. Optical quality of the human eye progressively deteriorates with age. The cornea may partially explain the reduction of optical performance of the complete eye. The average image quality in patients with intraocular lenses was similar to the average of normal older subjects.
|
3 |
Design and performance of cold bent glassDatsiou, Kyriaki Corinna January 2017 (has links)
The demand for flat glass is high and increasing significantly in the building industry as a direct result of architectural requirements for lightness, transparency and natural light. Current architectural trends require glass in curvilinear forms for smooth free-form façades. Two principal challenges arise from this: to cost-effectively produce the desired curvature and; to ensure its safe performance after exposure to ageing. The recent availability of high strength glass provides an opportunity to address the first challenge by developing cold bent glass. Cold bending involves the straining of relatively thin glass components, at ambient temperatures, and is a low energy and cost effective manner of creating curvilinear forms. However, cold bending is not yet widely established as a reliable method. The aim of this thesis is to develop the understanding of cold bent glass during the bending process and to evaluate its post-ageing performance. This thesis, firstly, investigates the mechanical response of monolithic glass plates during the cold bending process. The stability of cold bent glass is investigated experimentally by bending it in double curved anticlastic shapes. A parametric numerical analysis involves different boundary conditions, geometrical plate characteristics and bending parameters. The principal outcome is that a local instability, now termed cold bending distortion, occurs when certain displacement limits are exceeded and could degrade the optical quality of the glass. An evaluation procedure is also formulated to set limits and aid designers/manufacturers to predict the mechanical response and the optical quality of the glass. Cold bent glass is subjected to permanent bending stresses throughout its service life and therefore, its strength degradation after ageing needs to be quantified. Analytical, experimental and numerical investigations are undertaken in this thesis to identify the most effective method for estimating glass strength (evaluation of destructive tests, required number of specimens, statistical analysis methods and sub-critical crack growth). The limited availability of naturally aged toughened glass and the absence of a reliable ageing standard impede the evaluation of its aged performance. Therefore, a parametric experimental investigation of artificial ageing methods on glass is undertaken in this thesis. A procedure for the evaluation of the strength of aged glass is finally, formulated to allow the selection of artificial ageing parameters that correspond to a target level of erosion. The knowledge on artificial ageing and strength prediction acquired above is finally implemented on different types of glass to determine their strength after ageing and assess their safe use in cold bending / load bearing applications. The investigation showed that fully toughened glass has a superior performance to chemically toughened or annealed glass. Overall, the research presented in this thesis demonstrates that high quality cold bent toughened glass can be created when certain applied displacement limits are respected. These can be used as a safe, cost-effective and energy efficient replacement to the more conventional hot bent glass. However, cold bending / load bearing applications in which the stressed glass surface is exposed to ageing, require glass with a relatively high case depth such as fully toughened or bi-tempered glass.
|
4 |
Wave aberrations in ophthalmic progressive power lenses and impact on visual quality. / Aberraciones en lentes oftálmicas de potencia progresiva y su impacto en la calidad visual.Villegas Ruiz, Eloy Ángel 27 November 2009 (has links)
Las lentes progresivas (LP) para gafas es una solución muy extendida para la presbicia, ya que proporcionan una visión continua a todas las distancias debido a un cambio progresivo de potencia. En este trabajo se han medido las aberraciones de frente de onda espacialmente resueltas y la calidad visual en estas lentes. Además del astigmatismo que aumenta periféricamente, también se han encontrado pequeños valores de aberraciones de tercer orden, coma y trefoil, que producen un bajo deterioro de la calidad óptica y visual. El logaritmo de métricas sobre la PSF del sistema lente con ojo son las que mejor predicen la agudeza visual. Durante la primera semana de adaptación, no se aprecia una mejora significativa de la agudeza visual a través de distintas zonas de las LPs. Al comparar diferentes LPs, las aberraciones, principalmente el astigmatismo, se comporta como un colchón de agua, que se puede mover pero no eliminar. / Progressive lenses (PL) are designed to provide continuous vision at all distances by means a progressive change in spherical power from upper to lower zones. In this thesis, we measure the spatially resolved aberrations and the visual quality of PLs. In addition to astigmatism, third order aberrations, coma and trefoil, are also found in the PLs, but the impact of these aberrations on visual performance is limited. The logarithm of metrics on the PSF of the entire system eye plus PL are the parameters that best predict the visual acuity. There is not a significant improvement of visual acuity through the different zones of the PLs during the first week of adaptation. The current designs of PLs are somehow similar to a waterbed, with the aberrations, mainly astigmatism, being the water: they can be moved but they cannot be eliminated.
|
5 |
Development of Sensitive In Vitro Assays to Assess the Ocular Toxicity Potential of Chemicals and Ophthalmic ProductsMcCanna, David January 2009 (has links)
The utilization of in vitro tests with a tiered testing strategy for detection of mild ocular irritants can reduce the use of animals for testing, provide mechanistic data on toxic effects, and reduce the uncertainty associated with dose selection for clinical trials. The first section of this thesis describes how in vitro methods can be used to improve the prediction of the toxicity of chemicals and ophthalmic products. The proper utilization of in vitro methods can accurately predict toxic threshold levels and reduce animal use in product development. Sections two, three and four describe the development of new sensitive in vitro methods for predicting ocular toxicity. Maintaining the barrier function of the cornea is critical for the prevention of the penetration of infections microorganisms and irritating chemicals into the eye. Chapter 2 describes the development of a method for assessing the effects of chemicals on tight junctions using a human corneal epithelial and canine kidney epithelial cell line. In Chapter 3 a method that uses a primary organ culture for assessing single instillation and multiple instillation toxic effects is described. The ScanTox system was shown to be an ideal system to monitor the toxic effects over time as multiple readings can be taken of treated bovine lenses using the nondestructive method of assessing for the lens optical quality. Confirmations of toxic effects were made with the utilization of the viability dye alamarBlue. Chapter 4 describes the development of sensitive in vitro assays for detecting ocular toxicity by measuring the effects of chemicals on the mitochondrial integrity of bovine cornea, bovine lens epithelium and corneal epithelial cells, using fluorescent dyes.
The goal of this research was to develop an in vitro test battery that can be used to accurately predict the ocular toxicity of new chemicals and ophthalmic formulations. By comparing the toxicity seen in vivo animals and humans with the toxicity response in these new in vitro methods, it was demonstrated that these in vitro methods can be utilized in a tiered testing strategy in the development of new chemicals and ophthalmic formulations.
|
6 |
Development of Sensitive In Vitro Assays to Assess the Ocular Toxicity Potential of Chemicals and Ophthalmic ProductsMcCanna, David January 2009 (has links)
The utilization of in vitro tests with a tiered testing strategy for detection of mild ocular irritants can reduce the use of animals for testing, provide mechanistic data on toxic effects, and reduce the uncertainty associated with dose selection for clinical trials. The first section of this thesis describes how in vitro methods can be used to improve the prediction of the toxicity of chemicals and ophthalmic products. The proper utilization of in vitro methods can accurately predict toxic threshold levels and reduce animal use in product development. Sections two, three and four describe the development of new sensitive in vitro methods for predicting ocular toxicity. Maintaining the barrier function of the cornea is critical for the prevention of the penetration of infections microorganisms and irritating chemicals into the eye. Chapter 2 describes the development of a method for assessing the effects of chemicals on tight junctions using a human corneal epithelial and canine kidney epithelial cell line. In Chapter 3 a method that uses a primary organ culture for assessing single instillation and multiple instillation toxic effects is described. The ScanTox system was shown to be an ideal system to monitor the toxic effects over time as multiple readings can be taken of treated bovine lenses using the nondestructive method of assessing for the lens optical quality. Confirmations of toxic effects were made with the utilization of the viability dye alamarBlue. Chapter 4 describes the development of sensitive in vitro assays for detecting ocular toxicity by measuring the effects of chemicals on the mitochondrial integrity of bovine cornea, bovine lens epithelium and corneal epithelial cells, using fluorescent dyes.
The goal of this research was to develop an in vitro test battery that can be used to accurately predict the ocular toxicity of new chemicals and ophthalmic formulations. By comparing the toxicity seen in vivo animals and humans with the toxicity response in these new in vitro methods, it was demonstrated that these in vitro methods can be utilized in a tiered testing strategy in the development of new chemicals and ophthalmic formulations.
|
Page generated in 0.0728 seconds