La température et la pression partielle d’oxygène (PO2) constituent les paramètres majeurs contrôlantles évolutions thermochimiques en réacteur des combustibles nucléaires de type oxyde, et notammentla spéciation des produits de fission potentiellement corrosifs (Cs, I, Te). Pour limiter les risques derupture de la gaine en Zr par corrosion, une solution innovante consiste à imposer au combustible defonctionner dans un domaine de PO2 où les espèces chimiques des gaz de fission sont inoffensives, pardopage in-situ avec un tampon oxydo-réducteur solide. Le niobium, avec ses couples redoxNbO2/NbO et Nb2O5/NbO2, a été identifié comme le candidat le plus prometteur. Un procédé defabrication d’un combustible dopé niobium répondant à cet objectif et conforme aux spécificationsd’usage (densité, microstructure) a été optimisé. L’étude expérimentale du système UO2-NbOx a révélél’existence à 810°C d’une phase liquide entre UO2 et NbO2, non identifiée à ce jour. La caractérisationdes phases solides et en solution du niobium nous a conduit à proposer un modèle thermodynamiquede solubilité du dopant dans UO2 à 1700°C. Une étude approfondie de la spéciation du niobiumprécipité a permis d’identifier la présence simultanée dans le matériau des phases majeures NbO2 etNbO, ainsi que Nb en moindre teneur. La coexistence du niobium sous deux degrés d’oxydationdifférents constitue un élément-clé de démonstration d’un possible effet tampon in-situ, dont l’impactest observé sur certaines propriétés du combustible dépendantes de la PO2, la densification notamment.Les résultats confirment le potentiel prometteur des combustibles tamponnés en PO2 au regard de sesperformances en réacteur. / Temperature and oxygen partial pressure (PO2) of nuclear oxide fuels are the main parametersgoverning both their thermochemical evolution in reactor and the speciation of volatile fissionproducts such as Cs, I or Te. An innovative way to limit the risk of cladding rupture by corrosionunder irradiation consists in buffering the oxygen partial pressure of the fuel under operation in a PO2domain where the fission gas are harmless towards Zr clad, by using solid redox buffers as additives.Niobium, with its NbO2/NbO and Nb2O5/NbO2 redox couples has been found to be a promisingcandidate to this end. A manufacturing process of a buffered UO2 fuel, doped with niobium has beenoptimized, in order to fulfill usual specifications (density, microstructure). The experimental study ofthe UO2-NbOx system has shown the existence of a liquid phase between UO2 and NbOx at 810°C,which was not reported in the literature. The characterization of Nb containing phases present in UO2both in solid solution and as precipitates has lead us to propose a solubility thermodynamic model ofniobium in UO2 at 1700°C. An extensive study of the niobium precipitates shows the co-existence inthe fuel of NbO2 and NbO as major phases, together with small amounts of metallic Nb. The coexistenceof niobium under two oxidation states inside the fuel is a key element of demonstration of apossible in-situ buffering effect, which is likely to impact some properties of the material that aredependent upon PO2, such as densification. These results confirm the promising potential of oxygenbuffered fuels as regard to their performance in reactor.

In this thesis, we consider a cooperative relay-assisted communication system that uses rateless codes. When multiple relays are present, the relay with the highest channel gain to the source is the first to successfully decode a message from the source and forward it to the destination. Thus, the unique properties of rateless codes ensure that both rate adaptation and relay selection occur without the transmitting source or relays acquiring instantaneous channel knowledge. We show that in such cooperative systems, buffering messages at relays significantly increases throughput. We develop a novel analysis of these systems that combines the communication-theoretic aspects of cooperation over fading channels with the queuing-theoretic aspects associated with buffering. Closed-form expressions are derived for the throughput and end-to-end delay for the general case in which the channels between various nodes are not statistically identical. Results are also shown for the benchmark system that does not buffer messages. Though relay selection combined with buffering of messages at the relays substantially increases the throughput of a cooperative network, it also increases the end-to-end delays due to the additional queuing delays at the relay nodes. In order to overcome this, we propose a novel method that exploits a unique property of rateless codes that enables a receiver to decode a message from non-contiguous and unordered portions of the received signal. In it, each relay, depending on its queue length, ignores its received coded bits with a given probability. We show that this substantially reduces the end-to-end delays while retaining almost all of the throughput gain achieved by buffering. In effect, the method increases the odds that the message is first decoded by a relay with a smaller queue. Thus, the queuing load is balanced across the relays and traded off with transmission times. We derive conditions for the stability of this system when the various channels undergo fading. Despite encountering analytically intractable G/GI/1 queues in our system, we also gain insights about the method by analyzing a similar system with a simpler model for the relay-to-destination transmission times. Next we combine the single relay selection scheme at the source with physical layer power control at the relays (due to the diversity provided by the rateless codes, power control at the source is not needed). We derive an optimal power control policy that minimizes the relay to destination transmission time. Due to its computational and implementation complexity, we develop another heuristic easily implementable near optimal policy. In this policy, power allocated turns out to be inversely proportional to the square root of channel gain. We also see that this policy performs better than the channel inversion policy. Our power control solution substantially decreases the mean end-to-end delays with a marginal increase in throughput also. Finally, we combine bit dropping with power control at the relays which further improves the system performance.

The aim of this diploma thesis is to design active frequency filters based on passive RLC prototype. Three methods of the design of active filters and active functional blocks of electronic circuits working in current or mixed mode are used to this purpose. These blocks allow to process electrical signals with frequencies up to low tens of megahertz. In addition they feature for instance with high slew rate and low supply voltage power. Active high-pass and low-pass 2nd order filters are designed using simulation of inductor by active subcircuit method. Grounded and subsequently floating synthetic inductor is made with the current conveyors in the first case and with the current operational amplifiers with single input and differential output in the second case. This method advantage is relatively simple design and disadvantage is great quantity of active functional blocks. Active filters based on passive frequency ladder 3rd order filter while only one floating inductor is connected, are designed with circuit equation method. In the first design differential input / output current followers are used and in the second case current-differencing buffered amplifiers are used. This method benefits by smaller active blocks number and disadvantage is more complex design of the active filter. Active filter based on passive prototype of low-pass 3rd order filter with two floating inductors is designed with Bruton transformation method. Final active filter uses current operational amplifiers with single input and differential output which together with other passive elements replace frequency depending negative resistor, which arise after previous Bruton transform. This method usage is advantageous if the design consists of larger quantity of inductors and less number of capacitors. High-pass 2nd order filter is simulated by tolerance and parametrical analyses. Physical realisation utilising current feedback operational amplifier which substitute commercially hardly accessible current conveyors is subsequently made. Measurements of constructed active filter show that additional modifications, which allow better amplitude frequency characteristics conformity, are necessary.

Indiana University-Purdue University Indianapolis (IUPUI) / Introduction: Profound pulpal anesthesia is not always adequate in mandibular teeth after the administration of local anesthesia, especially in the presence of irreversible pulpitis. Failure to achieve anesthesia has been seen in 30–80% of patients in teeth with a diagnosis of irreversible pulpitis. Onpharma™ developed an FDA-approved device that uses sodium bicarbonate to buffer a standard local anesthetic (LA) solution so that its pH may become closer to its pKa. Claims have been made that buffering a local anesthetic increases the anesthetic’s effect. Previous studies on the anesthetic efficacy of Onpharma’s Onset buffering system were inconclusive and may be dependent on the techniques used. Objectives: The aim of this study is to determine whether a buffered local anesthetic can lead to more profound and faster pulpal anesthesia in mandibular molars diagnosed with symptomatic irreversible pulpitis as compared to a standard, unbuffered local anesthetic. Materials and Methods: 40 total subjects completed the study. Screened and eligible subjects with a mandibular molar diagnosed with symptomatic irreversible pulpitis were randomly allocated into 2 groups so 1 group received a total of 3 cartridges of a standard, unbuffered 2% lidocaine with 1:100,000 epinephrine via inferior alveolar nerve block (IANB) followed by supplemental buccal and lingual infiltrations, while the other received the equivalent yet buffered formulation. An electronic pulp tester (EPT) was used to objectively determine baseline pulpal status of the affected tooth, followed by 2-minute interval testing following the administration of all local anesthesia. The onset of pulpal anesthesia was defined by the first of 2 consecutive EPT=80 readings, and the endodontic treatment could begin. Profound pulpal anesthesia was ultimately determined if the patient reported a comfortable pulpotomy as reflected on the Wong-Baker FACES Visual Analog Scale. Null Hypothesis 1: Subjects possessing mandibular molars diagnosed with symptomatic irreversible pulpitis will not achieve pulpal anesthesia more profoundly using buffered 2% lidocaine w/ 1:100,000 epinephrine in comparison to the standard, unbuffered anesthetic formulation. Null hypothesis 2: Subjects possessing mandibular molars diagnosed with symptomatic irreversible pulpitis will not achieve pulpal anesthesia faster using buffered 2% lidocaine w/ 1:100,000 epinephrine in comparison to the standard, unbuffered anesthetic formulation. Results: We observed a local anesthetic success rate of 45% in the buffered group, 70% in the unbuffered group, and ultimately 57.5% between both groups. The findings further indicate that the VAS scores after pulpotomy is significantly different between the 2 groups (p=0.019), with the unbuffered group having a more profound mean VAS score of 1.2 (as opposed to a buffered mean of 3.1). Regarding the time of onset for pulpal anesthesia, there was no statistically significant difference noted between the buffered and unbuffered groups. Conclusion: Based on the findings of this study, the null hypothesis 1 cannot be rejected since unbuffered 2% lidocaine with 1:100,000 epinephrine had a statistically significant increase in profound pulpal anesthesia compared to the buffered equivalent. The null hypothesis 2 cannot be rejected since there was no evidence of a significant difference in the time to pulpal anesthesia between the buffered and unbuffered groups.

Die Arbeit beschreibt die Entwicklung und Evaluierung zweier neuartiger Technologien (Maske und Spacer) zur Erzeugung von Airgap-Strukturen in Mehrebenenmetallisierungen integrierter Schaltkreise. Ausgangspunkt der Arbeit bildet die Aufarbeitung der Thematik der low-k Materialien sowie der aus der Literatur bekannten Airgap-Ansätze. Es werden die beiden entwickelten Konzepte zur Airgap-Erzeugung prinzipiell beschrieben und hinsichtlich der definierten Zielstellungen (konventionelle Prozessierung, Skalierbarkeit, selektiver Eintrag) sowie vergleichend zu alternativen Airgap-Ansätzen diskutiert. Im Fortgang werden Präparationen beider Technologien vorgestellt und deren Machbarkeit nachgewiesen. Die Erprobung und Optimierung einzelner Prozesse werden dokumentiert. Anhand der funktionsbedingten Anforderungen an Materialien und Grenzflächen werden ausgewählte Integrationsaspekte untersucht. Den Schwerpunkt bildet dabei der Einfluss von Fluorwasserstoffsäure auf elektrisch leitfähige und dielektrische Diffusionsbarrieren, Kupfer sowie deren Verbund. Es werden Möglichkeiten gezeigt, unerwünschte Wechselwirkungen zu minimieren und die Zuverlässigkeit der defektfreien Airgap-Erzeugung zu steigern. Die Arbeit beinhaltet zudem die Charakterisierung von Airgap-Strukturen entsprechend beider Ansätze hinsichtlich ihres elektrischen, thermischen und mechanischen Verhaltens für variierte Geometrien und Materialeigenschaften. Es werden FEM-Simulationen genutzt, um Messwerte zu verifizieren, Extrapolationen bei variierten Eingabedaten durchzuführen oder nicht messbare Größen zu extrahieren.

Die Arbeit beschreibt die Entwicklung und Evaluierung zweier neuartiger Technologien (Maske und Spacer) zur Erzeugung von Airgap-Strukturen in Mehrebenenmetallisierungen integrierter Schaltkreise. Ausgangspunkt der Arbeit bildet die Aufarbeitung der Thematik der low-k Materialien sowie der aus der Literatur bekannten Airgap-Ansätze. Es werden die beiden entwickelten Konzepte zur Airgap-Erzeugung prinzipiell beschrieben und hinsichtlich der definierten Zielstellungen (konventionelle Prozessierung, Skalierbarkeit, selektiver Eintrag) sowie vergleichend zu alternativen Airgap-Ansätzen diskutiert. Im Fortgang werden Präparationen beider Technologien vorgestellt und deren Machbarkeit nachgewiesen. Die Erprobung und Optimierung einzelner Prozesse werden dokumentiert. Anhand der funktionsbedingten Anforderungen an Materialien und Grenzflächen werden ausgewählte Integrationsaspekte untersucht. Den Schwerpunkt bildet dabei der Einfluss von Fluorwasserstoffsäure auf elektrisch leitfähige und dielektrische Diffusionsbarrieren, Kupfer sowie deren Verbund. Es werden Möglichkeiten gezeigt, unerwünschte Wechselwirkungen zu minimieren und die Zuverlässigkeit der defektfreien Airgap-Erzeugung zu steigern. Die Arbeit beinhaltet zudem die Charakterisierung von Airgap-Strukturen entsprechend beider Ansätze hinsichtlich ihres elektrischen, thermischen und mechanischen Verhaltens für variierte Geometrien und Materialeigenschaften. Es werden FEM-Simulationen genutzt, um Messwerte zu verifizieren, Extrapolationen bei variierten Eingabedaten durchzuführen oder nicht messbare Größen zu extrahieren.

[ES] La seguridad alimentaria es una prioridad para la población y en la actualidad cobra mayor importancia por ciertas tendencias alimentarias como el consumo de alimentos crudos y la distribución generalizada de alimentos orgánicos, que pueden ser la causa de enfermedades transmitidas por alimentos. Para garantizar la seguridad alimentaria, la detección de estos microorganismos debe realizarse de manera rápida y eficiente. Par eso, el método de cultivo microbiológico se considera el oficial para la detección de estos patógenos. Sin embargo, adolece de importantes inconvenientes, ya que no solo requiere mucho tiempo, sino que también es laborioso y consume muchos recursos. Además, puede ser limitado con respecto a la detección de bacterias fisiológicamente alteradas y/o estresadas durante el almacenamiento y la conservación. En este trabajo se ha desarrollado un protocolo sencillo y rápido para la detección simultánea de E. coli, L. monocytogenes, S. aureus y S. enterica en alimentos, mediante la combinación de una etapa de co-cultivo en medio líquido y la detección por PCR múltiple. Se ha evaluado la eficiencia de varios medios de enriquecimiento y se seleccionó el agua de peptona tamponada como el medio óptimo para el co-cultivo de las cuatro bacterias diana. También se optimizaron las condiciones de PCR múltiple y se aplicaron tanto a co-cultivos como a muestras de alimentos inoculados artificialmente, lechuga orgánica y carne picada. Después de la optimización, la PCR múltiple desarrollada fue capaz de detectar las cuatro bacterias simultáneamente, hasta con una inoculación inicial de 10^0 UFC/mL. En presencia de ambas matrices alimentarias inoculadas, tras la etapa de co-cultivo, la PCR múltiple pudo detectar simultáneamente las 3 bacterias E. coli, S. enterica y L. monocytogenes, mientras que S. aureus se ha detectado por PCR simplex, a partir del mismo extracto de ADN del co-cultivo. Los resultados obtenidos permiten concluir que el uso de un paso de co-cultivo en Agua peptona tamponada, antes de la detección por PCR simple y múltiple, puede facilitar la detección simultánea de las cuatro bacterias potencialmente presentes en las matrices alimentarias. La presencia o ausencia de la bacteria diana en los alimentos se confirma en unas 30 horas, lo que reduce el tiempo requerido para la detección en comparación con el tiempo mínimo de 7 días por método cultural. Asimismo, permite reducir el número de medios de cultivo y reactivos, para el aislamiento e identificación de bacterias que no son detectadas por PCR y que no están presentes en las matrices alimentarias, lo que supone un importante ahorro económico. / [CA] La seguretat alimentària sempre és una prioritat per a la població i en l' actualitat cobra major importància per certes tendències alimentàries, com el consum d' aliments crus i la distribució generalitzada d' aliments orgànics, que poden ser la causa de malalties transmeses per aliments. Per garantir la seguretat alimentària, la detecció d' aquests microorganismes s' ha de realitzar de manera ràpida i eficient. Per a això, el mètode de cultiu microbiològic es considera l' oficial per a la detecció d' aquests patògens. Però, hi ha importants inconvenients, ja que no només requereix més temps, sinó que també és laboriós i consumeix molts recursos. A més, pot ser limitat pel que fa a la detecció de bacteris fisiològicament alterats i/o estressats durant l'emmagatzematge i la conservació. En aquest treball s'ha desenvolupat un protocol senzill i ràpid per a la detecció simultània d' E. coli, L. monocytogenes, S. aureus i S. enterica en aliments, mitjançant la combinació d' una etapa de co-cultiu en medi líquid i la detecció per PCR múltiple. S'ha avaluat l'eficiència de diversos mitjans d'enriquiment i s'ha seleccionat l'aigua de peptona tamponada com el medi òptim per al co-cultiu dels quatre bacteris diana. També es van optimitzar les condicions de PCR múltiple i es van aplicar tant a co-cultius com a mostres d'aliments inoculats artificialment, enciam orgànic i carn picada. Després de l'optimització, la PCR múltiple desenvolupada va ser capaç de detectar els quatre bacteris simultàniament, fins a una inoculació inicial de 10^0 UFC/mL. En presència d' ambdues matrius alimentàries inoculades, després l' etapa de co-cultiu, la PCR múltiple va poder detectar simultàniament els 3 bacteris: E. coli, S. enterica i L. monocytogenes, mentre que S. aureus s' ha detectat per PCR simple, a partir del mateix extracte d' ADN del co-cultiu. Els resultats obtinguts permeten concloure que l' ús d' un pas de co-cultiu en Aigua de peptona tamponada, abans de la detecció per PCR simple i múltiple, pot facilitar la detecció simultània dels quatre bacteris potencialment presents en les matrius alimentàries. La presència o absència del bacteri diana en els aliments es confirma en unes 30 hores, la qual cosa redueix el temps requerit per a la detecció en comparació amb el temps mínim de 7 dies per mètode cultural. Així mateix, permet reduir el nombre de mitjans de cultiu i reactius, per a l' aïllament i identificació de bacteris que no són detectats per PCR i que no estan presents en les matrius alimentàries, la qual cosa suposa un important estalvi econòmic. / [EN] Food safety is a priority for the population and is nowadays more important than ever due to certain dietary trends such as the consumption of raw foods and the widespread distribution of organic foods, which may be the cause of foodborne diseases. To ensure food safety, the detection of these microorganisms must be done quickly and efficiently. Although, the microbiological culture method is considered to be the official method for the detection of these food-borne pathogens, it suffers from significant drawbacks, such as time-consuming, laborious and expensive, in addition it may be limited regarding the detection of physiologically altered and/or stressed bacteria, during storage and preservation. In this work has been developed a simple and rapid protocol for the simultaneous detection of E. coli, L. monocytogenes, S. aureus and S. enterica in food, by combining a liquid co-culture step and detection by multiplex PCR. The efficiency of several enrichment media was evaluated and buffered peptone water was chosen as the optimal medium for the co-culture of the four target bacteria. Then, optimized multiplex PCR conditions were applied to both the co-cultures and the samples of artificially inoculated foods, organic lettuce and ground meat. After optimization, the developed multiplex PCR was able to simultaneously detect the four bacteria, up to an initial inoculation of 10^0 CFU/mL. In the presence of the two inoculated food matrices, after a co-culture step, the multiplex PCR could simultaneously detect the 3 bacteria: E. coli, S. enterica and L. monocytogenes, whereas, S. aureus has been detected by simplex PCR, from the same co-culture DNA template. The results obtained allow conclusion that the use of a co-culture step in Buffered Peptone Water, before detection by simplex and multiplex PCR, can facilitate the simultaneous detection of the four bacteria potentially present in the food matrices. The presence or the absence of the target bacteria in food is confirmed in approximately 30 hours, which reduce the time required for the detection compared to the minimum time of 7 days by cultural method. Also, it allows to reduce the number of culture media and reagents, for the isolation and identification of bacteria that are not detected by PCR and which are not initially present in the food matrices, which represents a significant economic savings. / Boukharouba, A. (2022). Isolation and Identification of Foodborne Pathogens of Special Interest in Food Safety [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/182828

Habitat degradation, fragmentation and loss are important factors causing loss in biodiversity and red listed species, and restoring habitats is essential in preventing this. However, there is a limited knowledge of the long term effects of restoration measures. This study focuses on analysing the long term restoration success of restoration measures carried out in a restoration program between the 1980's and early 2000's in locations of acidic fen, buffered fen, dry heather, wet heather, and wet grassland. The aim of the restoration program was to diminish the effects on ecosystems that were influenced by eutrophication, acidification, and dehydration. The locality species composition and Ellenberg values of nitrogen (EVN), moisture (EVM) and pH levels (EVpH) are analysed, by using previous and current restoration success scores from 54 locations in the province of Drenthe in the Netherlands. The dependence of restoration success score and Ellenberg values on change over time, habitat type, restoration method and EVN, EVM and EVpH are analysed. Restoration success depended on habitat type, with wet heather having significantly higher success compared to wet grasslands. The change in score over time, however, did not vary among habitats. Restoration success did not depend on restoration method(s), nor did change in restoration success. Ellenberg values varied among habitat types, and EVM changed significantly over time in dry heather, but was not significantly related to restoration success score. In conclusion, wet heather was shown to be doing quite well, but could benefit from additional restoration. Acidic fen, buffered fen, dry heather, and wet grassland have all shown poor long term restoration effects, indicating an overall need for further restoration measures. The results also highlight the importance of further studies into the effect of long term restorations, especially focused on finding successful restoration methods, and the importance of detailed data gathered in the field.

As of today, Alzheimer’s disease is the leading cause of dementia among neurodegenerative disorders, affecting many millions of people worldwide. As the average life span of populations increase, more and more people succumb to the illness each year. Like other neurodegenerative disorders, Alzheimer’s disease can be attributed to the accumulation of protein aggregates in the brain. These amyloid-β peptides and tau proteins can presumably be detected in the brain many years before the onset of clinical symptoms. Development of fluorescent ligands, capable of binding to these neuropathological hallmarks and highlighting them, could serve as molecular diagnostic tools and facilitate an early diagnosis of the disease. The method could also be useful in studying disease progression and evaluating the effects of novel treatments. One such ligand is HS-259. The aim of this project was to synthetize different analogues of HS-259, and test their selectivity towards the aforementioned aggregates in brain tissue from an individual with Alzheimer’s disease. Staining of tissue samples with analogue solution enables visualization of aggregate sites through fluorescence imaging. In the end, five analogues were synthetized, albeit in relatively low overall yields. Synthetic methods included Suzuki-Miyara cross-couplings, Ullmann-type arylations and condensations. Liquid Chromatography-Mass Spectrometry (LC-MS) and Nuclear Magnetic Resonance (NMR) were used for analysis of the compounds. Two of the five analogues could be tested for staining of aggregates and assessed for photophysical characteristics, i.e. absorption- and emission spectra. One analogue stained both amyloid-β aggregates and some tau aggregates, whereas the other stained neither. Since only two analogues were tested and rendered inconsistent results, further studies are needed to assess the binding properties of HS-259 analogues in general.