No description available.

No description available.

Durant les darreres dècades, el disseny de processos en el marc de la química sostenible ha anat creixent de forma exponencial. La recerca constant de processos mes benignes amb el medi ambient ha implicat un gran esforç per obtenir millors rendiments mitjançant l'activació de llocs específics, i possant especial èmfasi amb el control de la quimio-, la regio- i la enantioselectivitat, punts crucials per a l'economia atómica. En aquest sentit, els dissolvents juguen un paper crític, i com podrà veure's al llarg d'aquesta memòria..Aquesta Tesi s'enfoca en l'ús de mitjans de reacció alternatius i sostenibles, com són els líquids iònics (ILs), el diòxid de carboni supercrític (scCO2) i la barreja de ambdós dissolvents, amb l'objectiu de disminuir l'ús de dissolvents orgànics convencionals i la seva aplicació en els següents processos catalítics: hidrogenació asimètrica, reacció de Suzuki d'acoblament creuat C-C, reacció d'alquilació al·lílica asimètrica i la hidrogenació de arens. / In the last decades, the design of processes in the framework of the sustainable chemistry has been exponentially growing. The constant searching of cleaner processes has led to a lot of effort to obtain higher yields by activation of specific sites, and improving chemo-, regio- and enantio-selectivities, which are crucial from a point of view of an atom economy strategy. In this sense, solvents play a critical role. This PhD thesis focuses on the use of alternative sustainable reaction media such as ionic liquids (ILs), supercritical carbon dioxide (scCO2) and mixtures of both solvents in different catalytic processes, with the aim of decreasing the use of conventional organic solvents applied in the following catalytic reactions: homogeneous and supported rhodium catalysed asymmetric hydrogenation, biphasic palladium catalysed Suzuki C-C cross-coupling, homogeneous palladium catalysed asymmetric allylic alkylation, and ruthenium and rhodium nanoparticles catalysed arene hydrogenation were tested.

[pt] Neste trabalho, é abordado um estudo para o desenvolvimento de filtros passa faixa cuja função de transferência é denominada quase-elíptica ou semielíptica. Esse nome vem por causa da sua principal característica que é a de apresentar apenas um par de polos de atenuação na banda de rejeição. O par de polos é determinado por meio do acoplamento cruzado entre dois pares de ressonadores dispostos de forma não adjacente, dessa maneira, enquanto um par de ressonadores é acoplado eletricamente o outro par realiza um acoplamento magnético. O método é aplicado utilizando duas tecnologias diferentes. A primeira, onde são utilizados ressonadores em anel cortado, desenvolvidos em microfita para realização de filtros na banda X de frequência. Neste caso, foram desenvolvidos um filtro de quarta e um de sexta ordem. A segunda tecnologia onde o método foi implementado é conhecida como SIW (Substrate Integrated Waveguide), operando na faixa de frequência da banda K. Neste caso, cavidades integradas ao substrato foram utilizadas como ressonadores e sendo acopladas entre si por meio de vias metalizadas inseridas no substrato. Para determinar as características dos acoplamentos, foi realizada análise do comportamento dos campos elétrico e magnético na estrutura. / [en] In this work, a study is presented for the development of bandpass filters whose transfer function is called quasi-elliptic or semi-elliptical. This name comes from its main feature which is to present only a pair of attenuation poles in the rejection band. The pair of poles is determined by cross-coupling between two pairs of resonators disposed non-adjacently, wherein while one pair of resonators is coupled electrically, the other pair performs a magnetic coupling. The method is applied using two different technologies. The first one uses a split ring resonator developed in microstrip for the realization of filters in the X Band frequency spectrum. In this case, a fourth and sixth order filter was developed. The second technology where the method was implemented is known as SIW (Substrate Integrated Waveguide), operating in the frequency range of K Band. In this case, cavities integrated into the substrate were used as resonators and were coupled to each other by means of metallic substrates inserted into the substrate. To determine the coupling characteristics, the behavior of the electric and magnetic fields in the structure was analyzed.

Les bicycles imidazo-imidazoles constituent une classe de composés hétérocycliques intéressants tant sur le plan chimique que pharmaceutique. Ils jouent un rôle très important dans la synthèse et la fonctionnalisation des composés à visé thérapeutique. Dans le cadre de la recherche de nouveaux candidats inhibiteurs de kinases, nous avons développé une voie de synthèse des imidazo[1,2-a]imidazoles mono- et bifonctionnalisés. Par la suite, nous avons mis au point une stratégie de synthèse rapide et efficace de bicycles imidazo[1,5-a]imidazolin-2-one et imidazo[1,5-a]imidazole. En outre, nous avons développé deux stratégies de fonctionnalisation via des réactions de couplage pallado-catalysées. Finalement nous avons synthétisé le motif imidazo[1,5-a]imidazole via la réaction de Groebke-Blackburn-Bienaymé (GBB). La potentialité de cette réaction a été exploitée dans des réactions decyclisation intramoléculaire! afin de préparer une nouvelle chimiothèque de composés polyhétérocycliques azotés. / The imidazo-imidazoles bicycles have received special attention among other nitrogen cycles due to their biologically interesting properties exploited in the medicine manufacturing. The imidazo-imidazole scaffold is one of the most representative nitrogen containing heterocycle, as it plays a significant role and possesses a major interest in drug synthesis and functionalization. In this work we report firstly a synthetic pathway to novel imidazo[1,2-a]imidazoles candidates for CKD inhibitors. Secondly we develop two strategies to prepareimidazo[1,5-a]imidazoles and their reactivity via pallado-catalyzed reactions. Finally, we disclose a fast and an efficient access to imidazo[1,5-a]imidazoles by using the Groebke-Blackburn-Bienaymé reaction (GBB), followed by a palladium catalysed intramolecular cyclization, affording thus new tetracyclic products with an elevated degree of molecular diversity.

La formation de cancers est liée à des dérèglements de la progression du cycle cellulaire ou de l’apoptose. L’identification des acteurs cellulaires mis en jeu dans la maladie et l’élucidation des mécanismes responsables de ces dysfonctionnements sont à la base de nouveaux traitements anticancéreux. Ainsi, en vue du développement de thérapies ciblées, les kinases Pim et les protéines anti-apoptotiques de la famille des Bcl-2, surexprimées dans de nombreux types de cancers et associées à des phénomènes de chimiorésistance, constituent des cibles pertinentes. Les kinases Pim (Pim-1,-2 et -3) sont une famille de sérine / thréonine kinases qui jouent un rôle fondamental dans les processus de survie, de prolifération ou de différenciation cellulaire. Bien qu’elles possèdent un substrat commun avec les autres protéines kinases, l’ATP, des différences structurales permettent de les différencier et de les inhiber sélectivement. En tenant compte de ces spécificités, nous nous sommes intéressés à la synthèse de nouveaux inhibiteurs sélectifs des kinases Pim, compétitifs de l’ATP. Parmi les autres agents impliqués dans la formation de tumeurs, les protéines de la famille des Bcl-2, responsables du phénomène d’apoptose ou mort cellulaire programmée, font l’objet d’un domaine d’étude récent. Elles se classent en deux familles selon leur fonction : les protéines pro-apoptotiques et les protéines anti-apoptotiques dont la surexpression est observée dans de nombreux cancers. Nous avons poursuivi l’étude de relations structure-activité initiée au laboratoire à partir de trimères d’alkoxyquinoléines, inhibiteurs micromolaires des protéines anti-apoptotiques Bcl-2 et Bcl-xL, en préparant de nouveaux analogues. / Cancer development is associated with dysfunctions in cell cycle progression or apoptosis. The identification of cellular agents involved in this disease, and the elucidation of mechanisms responsible for these dysfunctions provide the basis for the development of novel anti-cancer drugs.Thus, Pim kinases and Bcl-2 anti-apoptotic proteins which are overexpressed in many malignancies and contribute significantly to chemoresistance are of great interest for the development of targeted cancer therapy. Pim kinases (Pim-1,-2 and -3) belong to a family of serine / threonine kinases which play a key role in cell survival, proliferation and differenciation. Although all protein kinases share ATP as a common substrate, the structure of the ATP-binding pocket of Pim kinases is unique and offers an opportunity for a selective inhibition. Taking account of these specificities, we were interested in the synthesis of novel selective ATP competitive Pim kinase inhibitors. Among the other agents involved in tumorigenesis, Bcl-2 family proteins, which govern apoptosis (or programmed cell death), are subject of a recent interest. These proteins are divided in two classes depending on their function : pro-apoptotic and anti-apoptotic members that are overexpressed in a variety of cancers. In a preliminary work in the laboratory, alkoxyquinoline trimers have demonstrated micromolar inhibition against antiapoptotic proteins Bcl-2 and Bcl-xL. Therefore, we carried on this structure-activity relationship study with the synthesis of novel analogues.

Synthesis and Studies of Dendritic Poly(Ether Imine) Boronates and Cholesteryl-Functionalized Mesogens SYNOPSIS Dendrimers are hyperbranched synthetic macromolecules having branches-upon-branches structures, high molecular weights, globular shapes and monodispersities. Dendrimers possess a large number of modifiable functional groups at their peripheries. Initial efforts were largely concerned with the synthesis, design and development of new dendrimers. Exploring the chemical, biological and material applicability of these macromolecules are relevant to current interests, as a result of the unique structural features of dendrimers. Incorporation of transition metals and organic moieties at the peripheries of the dendrimers was studied to determine their efficacies in catalysis. Evolution of dendritic effects was observed in few instances, that were non-linear in nature. On the other hand, dendritic peripheries were also utilized to study mesogenic properties in liquid crystals. Chapter 1 of the Thesis gives an overview of the types of dendrimers, its structural features and their application in catalysis and as liquid crystalline materials. Chapter 2 describes the synthesis of a new type of poly(ethyl ether imine) dendrimer, having nitrogen as a branching unit, ethylene moiety as the spacer and an oxygen as the connecting linker. Synthesis, characterization, and studies of the photophysical properties of these dendrimers are described in this chapter. The molecular structure of second generation dendrimer is shown in Figure 1. Synthesis of this dendrimer was initiated using 2,2'-oxy-bis(ethan-1¬amine) as the core. The reaction sequence of two alternate nucleophilic substitutions and two alternate reductions, involving ethyl bromoacetate and bromoacetonitrile as monomers was employed in the synthesis of the dendrimer. The formation of dendrimers having ether linkage and tertiary amines as branching unit was established by spectroscopies and mass spectrometry. A number of functional groups, such as, acid, alcohol, amine, ester and nitrile are present at the peripheries of each generation the dendrimers that open up the possibilities for further studies. Carboxylic acid terminated poly(ethyl ether imine) dendrimers are substituted iminodiacetic acids, belonging to the class of polyaminocarboxylic acid. Methyl iminodiacetic acid boronates with NB coordination have emerged as an excellent substitute for unstable boronic acids. Upon increasing the steric bulk on the nitrogen moiety, the hydrolytic stability of the boronates to a base-catalyzed hydrolysis is increased. Combining the structure of carboxylic acid terminated dendrimer and the stability of the dendritic boronates, such dendritic iminodiacetic acids were reacted with arylboronic acids to prepare bis-and tetrakis-boronates (Figure 2). Kinetic hydrolytic studies of boronates were conducted to assess the stabilities of the newly synthesized dendritic boronates. From the studies it was observed that the tetrakis-boronate was ~20 times more stable in comparison with dimeric and monomeric boronates (Figure 3). Subsequent to synthesis and hydrolytic stability studies, C-C bond-forming Suzuki-Miyaura cross-coupling reactions were conducted. A comparison of the reactivities among monomeric, dimeric and tetrameric arylboronates in C-C bond-forming reactions showed a higher reactivity of monomeric and dimeric boronates, than the tetrameric aryl boronate to construct ter-and tetra-aryl in one-pot iterative manner (Figure 4). Chapter 3 of this Thesis describes the synthesis and characterization of dendritic boronates and studies of their hydrolytic stability in Suzuki-Miyaura cross¬coupling reactions to construct ter-and tetraaryls. Figure 4. Synthesis of (a) ter-(6) and (b) tetra-aryls (7) by following one-pot iterative cross-coupling reactions. Step-wise iterative synthesis of dendrimer allows a uniform branching throughout the structure. The first and second generation poly(ether imine) dendrimer series, having hydroxyl groups at their peripheries were chosen for further modification. A versatile mesogenic group, namely, cholesterol was covalently attached at the peripheries of the dendrimers with succinic moiety as linker, so as to install 4 and 8 cholesteryl moieties at the peripheries of the dendrimers (Figure 5), that were characterized by H, C NMR spectroscopies and elemental analysis, so as to confirm their structural homogeneities. Figure 5. Molecular structures of the first and second generation dendritic mesogens. Subsequent to synthesis and characterization, liquid crystalline properties of all the dendritic mesogens was assessed through differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and X-ray diffraction (XRD) studies. In POM study, broken fan or leaf like texture revealed the lamellar arrangement, whereas homeotropic appearance of texture on surfactant (cetyltrimethylammonium bromide) coated substrate indicated the lamellar nature of G1-Et-(OCS)4, G1-Pr-(OCS)4 and G2-Pr-(OCS)8 (Figure 6). From DSC studies, the change in enthalpy was found to increase with increase in generation and change in enthalpy per mesogenic unit was found to be ~ -1 1-2 kJ mol, which indicated the mesophase arrangement to be lamellar. Decrease in the length of spacer dendritic backbone and increase in the generation increased the isotropization temperature of the dendritic liquid crystals. Variable temperature XRD studies were undertaken to characterize the mesophase property. Two sharp peaks in small angle region and a diffused halo in wide angle region in XRD pattern of the material suggested the smectic A (SmA) liquid crystalline arrangement of G1-Et-(OCS)4, G1-Pr-(OCS)4 and G2-Pr-(OCS)8 (Figure 7). Figure 6. POM textures of (a) G1-Et-(OCS)4 at 136 oC; (b) G2-Et-(OCS)8 at 129 oC; (c) G1-Pr-(OCS)4 at 92 oC; (d) G2-Pr-(OCS)8 at 118 oC and (e) transition temperatures for dendromesogens (DSC second heating cycle, heating-cooling rate = 10 oC min-1). Figure 7. Small angle XRD profiles of: (a) G1-Pr-(OCS)4 and (b) G2-Et-(OCS)8 at 60 o C (black), 150 oC (red) and 180 oC (green), (Insets: Lorentzean fit of wide angle peak). The second generation ethyl-linker dendrimer G2-Et-(OCS)8 exhibited a layered structure with a superimposed in-plane modulation (SmÃ), the length of which corresponded to a rectangular column width. Chapter 4 describes the synthesis, characterization and studies of mesophase property and fluorescence property of cholesterol functionalized homologous pairs of the PETIM dendritic liquid crystals. Peripheral functionalization of the dendrimers provides an easy access to dendritic liquid crystalline materials. The covalent functionalization was extended further with the dendrimers for both the series, so as to have 2, 4, 8 and 16 cholesteryl groups at the peripheries of 0, 1, 2 and 3 generation dendrimers, respectively, having succinic amide and phthalic ester functionalities for 1, 2 and 3 generation dendrimers with 4, 8 and 16 cholesteryl groups. Molecular structures of third generation dendrimers are shown in Figure 8. Figure 8. Molecular structures of third generation G3-Pr-(NHCS)16 and G3-Pr-(OCP)16. Subsequent to synthesis and characterization, mesophase property was studied through POM, DSC and XRD techniques. In POM study, a birefringent texture was observed in heating and cooling cycles. Leaflet, broken fan or bâtonnet like texture suggested the layered arrangement of the molecules (Figure 9). In DSC studiues, it was observed that the amide-linked dendrimers showed higher glass transition and isotropization temperatures than that of ester-linked dendrimers within the same generation irrespective of the back-bone of the dendrimer. Succinic moiety linked dendrimers showed lower glass transition temperature than that of phthalic moiety linked dendrimers and consequently, larger mesophase range. The change in enthalpy for isotropization was found to increase with increase in generation, whereas change in -1 enthalpy per mesogenic unit was 1-2 kJ mol, indicative of a layered arrangement in the mesophase. Figure 9. POM textures (20x) of (a) G3-Pr-(NHCS)16 at 90 oC; (b) G3-Pr-(OCS)16 at 90 ooo C; (c) PG1-(NHCS)4 at 134 C; (d) G3-Pr-(OCP)16 at 98 C and (e) transition temperatures for dendromesogens (second cycle, heating-cooling rate = 10 oC min-1). Appearance of two sharp peaks in small angle region and a wide halo in wide angle region in XRD pattern supported lamellar mesophase property of the material (Figure 10). On decreasing the temperature, increase in the layer thickness also suggested the smectic A arrangement of the molecules except third generation phthalate derivative G3-Pr-(OCP)16, which showed rectangular columnar mesophase. For all the dendromesogens, the layer thickness increased with the increase in generation. Upon protonation, the first generation dendrimer showed a change in mesophase from simple smectic A to modulated smectic A with decrease in layer thickness. The change in liquid crystal property of the dendromesogens from lamellar to columnar mesophase by changing the linker of the mesogen is unknown so far in the dendrimer liquid crystals. Chapter 5 gives details of synthesis, characterization and mesophase property study of ester-and amide-linked dendritic liquid crystals. Overall, the Thesis establishes a synthetic methodology for the synthesis of a new homologous series of poly(ether imine) dendrimers with ethyl spacer; synthesis of dendritic boronates and their studies in cross-coupling reactions through in-situ slow release of boronic acid; hydrolytic stability study showed higher stability of dendritic boronates which was used in one-pot iterative cross-coupling reactions to construct ter-and tetra-aryls. decrease in linker length in dendrimer backbone modified the thermal, as well as, mesophase behavior of the dendritic liquid crystals; change in the linker functionality from ester to amide changed the thermal behavior of dendritic liquid crystals; a switching of mesophase property from lamellar to columnar was observed by changing the rigidity of the linker from succinate to phthalate without changing the linker length. The results of the above chapters are in different stages of publications: 1 Dendritic iminodiacetic acids and their boronates in Suzuki-Miyaura cross¬coupling reactions. Sharma, A.; Kumar, P.; Pal, R.; Jayaraman, N. Revised Manuscript submitted. 2 In-plane modulated smectic à vs smectic A lamellar structures in homologous pairs of dendritic liquid crystals. Kumar, P.; Rao, D. S. S.; Prasad, S. K.; Jayaraman, N. Revised Manuscript submitted. 3 Effect of protonation on dendritic liquid crystals of poly(ether imine) dendrimers: structure property relationship studies. Kumar, P.; Rao, D. S. S.; Prasad, S. K.; Jayaraman, N. Manuscript submitted. 4 Smectic to rectangular columnar switch from succinic to phthalic linker alteration in poly(ether imine) dendritic liquid crystals. Kumar, P.; Rao, D. S. S.; Prasad, S. K.; Jayaraman, N. Manuscript in preparation.

Submitted by Maike Costa (maiksebas@gmail.com) on 2017-09-12T12:14:46Z No. of bitstreams: 1 arquivototal.pdf: 6051062 bytes, checksum: 9d8a71da8da5797495aee64e3b141b54 (MD5) / Made available in DSpace on 2017-09-12T12:14:46Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 6051062 bytes, checksum: 9d8a71da8da5797495aee64e3b141b54 (MD5) Previous issue date: 2016-10-31 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / Conselho Nacional de Pesquisa e Desenvolvimento Científico e Tecnológico - CNPq / Natural compounds, as coumarins and others oxygenated heterocycles, has been shown with a rich source of bioactive substances, however, due to difficulty of getting into large amounts of these substances isolated, many total synthesis or semi-synthesis methods has been developed. Among these many synthetic derivation strategies currently, the metal-catalyzed cross-coupling reactions have been highlighted in the literature, such as: Suzuki-Miyaura, Sonogashira, Heck, Negishi and Buchwald-Hartwig. In the present work, it is aimed the obtaining and preparation of natural heterocycles skeleton, and your derivations via cross-coupling palladium-catalyzed reactions; of which were obtained excellent results for the first three mentioned above, which was not repeated for the last two protocols, from the reactional conditions used. In all synthetics strategies realized, reactional conditions were diversify, such as temperature, reactional time, energy source, base, catalysts, among others; with the in order to observe the effects these changes and obtain the best sets of conditions. Besides the palladium-catalyzed reactions, some of cumarinic alkynes obtained by Sonogashira were submitted to the catalytic hydrogenation, to provide new alkanes with different spacers between the coumarinic ring and their phenyl groups. In general, the final compounds obtained showed from good to great yield values, reflecting on success in mostprotocols tested, where a total of 48 final molecules were obtained, of which 26 are novel compounds, all being characterized and proven according to their chemical structures. / Compostos naturais, como cumarinas e outros heterociclos oxigenados, tem se mostrado como uma rica fonte de substâncias bioativas, porém, devido à dificuldade da obtenção em grandes quantidades dessas substâncias isoladas, vários métodos de síntese total, ou semi-síntese têm sido desenvolvidos. Dentre as muitas estratégias de derivação sintética utilizadas atualmente, as reações de acoplamento cruzado catalisadas por metais têm tido destaque na literatura, como: Suzuki-Miyaura, Sonogashira, Heck, Negishi e Buchwald- Hartwig. No presente trabalho, objetivou-se a obtenção e preparação de esqueletos de heterociclos naturais, e suas derivações via reações de acoplamento cruzado catalisadas por paládio; das quais foram obtidos excelentes resultados para as três primeiras citadas anteriormente, o que não se repetiu para os dois últimos protocolos, a partir das condições reacionais utilizadas. Em todas as estratégias sintéticas realizadas, condições reacionais foram variadas, como temperatura, tempo recional, fonte de energia, base, catalisadores, entre outros; com o intuito de se observar os efeitos dessas mudanças e obter os melhores conjuntos de condições. Além das reações catalisadas por paládio, alguns dos alcinos cumarínicos obtidos por Sonogashira foram submetidos à hidrogenação catalítica, para fornecer novos alcanos com diferentes espaçadores entre o anel cumarínico e seus grupos fenílicos. De maneira geral, os compostos finais obtidos demonstraram de bons a ótimos valores de rendimento, refletindo no sucesso em boa parte dos protocolos testados, onde um total de 48 moléculas finais foram obtidas, das quais 26 são compostos inéditos, sendo todas caracterizadas e comprovadas de acordo com suas estruturas químicas.

No presente trabalho, uma série de calcogenotriazóis (3a-o,5a-f) foi sintetizada empregando reações de cicloadição entre azidas e alquinos catalisadas por cobre (CAACu), com duas diferentes metodologias: uma aplicada aos selenetos e outra aos teluretos triazólicos. Os selenetos acetilênicos (1a,b) foram submetidos ao sistema catalítico Cu(OAc)2/ascorbato de sódio, enquanto os teluretos (4a,b) sumetidos à CuI e PMDTA. Foi possível obter 14 diferentes selenotriazóis (3a-o) e 6 telurotriazóis (5a-f). Em seguida, os produtos obtidos através da cicloadição foram empregados como eletrófilos em reações de acoplamento cruzado tipo Negishi com nucleófilos de organozinco. Assim, o emprego de catalisador de níquel associado à fosfinas como ligantes permitiu a síntese de diversos compostos triazólicos (6a-k) partindo dos calcogenetos triazólicos (3k, 3l, 3o, 5a). Os resultados obtidos com a metodologia desenvolvida demonstraram a eficiência da catálise de níquel em reações de acoplamento tipo Negishi além da aplicabilidade dos produtos originados das reações de cicloadição catalisada por cobre. / In this work it was synthesized a range of different 4- organochalcogenoyl-triazoles (3a-o, 5a-f) employing the Copper Catalyzed Azide-Alkyne Cycloadittion (CAACu) 1,3-dipolar in two distinct methodologies: one of them applied to the selenium compounds and the other one to the tellurium triazoles. To the acetylenic selenides (1a,b) was employed the catalytic system composing of Cu(OAc)2 and sodium ascorbate, while with the telurides (4a,b), CuI and PMDTA was used. Practicing these methodologies it was possible to obtain 14 differents selenium-triazoles (3a-o) and 6 tellurotrizoles (5a-f). In the next step of the work, the products previously obtained through the CAACu were employed as the eletrophile partner in Negishi-type cross coupling reactions, with organozinc nucleophiles. Thereby, the use of nickel catalyst and fosfines ligands allowed some triazolic compounds (6a-k) synthesis starting from 1,2,3-triazole chalcogenides (3k, 3l, 3o, 5a). The results described here showed the nickel catalysis efficiency in Negishi-type cross-coupling reaction. Furthermore, it is remarkable the applicability of the products obtained from the CAACu.

Orientador: Luiz Carlos Dias / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-12T11:13:03Z (GMT). No. of bitstreams: 1 Melgar_GliseidaZelayaran_D.pdf: 8992583 bytes, checksum: 4cacbcdc703a19bccdf5bea13368488a (MD5) Previous issue date: 2008 / Resumo: Em 1995 Miao e colaboradores relataram o isolamento da estavamicina (1), um novo produto natural, membro da família dos pirrolocetoindanos, a partir de uma cultura líquida de Streptomyses sp., isolada de uma amostra de terra coletada na Índia. A estavamicina contém uma interessante subestrutura hexahidroindeno de fusão de anel trans com 5 centros estereogênicos, uma cadeia lateral que contém outros 2 centros estereogênicos, um álcool dialílico, três duplas ligações e um resíduo de carboxilato de sódio. Apresenta atividade inibidora moderada contra a ligação do fator de transcrição EBV BZLF1 com o DNA com um valor de IC50 = 50 mM.O fragmento C11-C26 (206), contendo o grupo pirrol e 5 centros estereogênicos da estavamicina, foi preparado a partir do (R)-3-hidroxi-2-metilpropionato de metila, após uma sequência de reações, que envolveu 14 etapas (rota linear mais longa) e um rendimento global de 7%. As principais características incluem a preparação de uma imida a,b-insaturada utilizando a reação de Horner-Wadsworth-Emmons, a reação de olefinação de Takai, o acoplamento cruzado de Stille, seguido da cicloadição intramolecular de Diels-Alder que fornece dois adutos bicíclicos, sendo o majoritário correspondente ao produto desejado (para os casos de R = (R)-Bn e R = H). A última etapa foi a preparação da lactona tricíclica seguida da abertura utilizando o 2-lítio-N-MEM-pirrol.O fragmento C1-C6 (235) foi preparado a partir do 3-hidroxi-pentanodioato de dietila, após uma seqüência de reações, que envolveu 7 etapas e um rendimento global de 11,5%. As principais características incluem a elegante reação de transesterificação por quebra de simetria, redução do ácido com borana seguida por oxidação de swern e olefinação utilizando o procedimento modificado de Stork-Wittig.Em conseqüência, a rota de obtenção dos fragmentos C1-C6 e C11-C26 aqui descrita é, em princípio, prontamente aplicável para a preparação da estavamicina e análogos que eventualmente pudessem apresentar atividade farmacológica destacada. / Abstract: Epstein-Barr virus (EBV) is a human herpes virus that infects lymphocytes and epithelial cells. Is has been estimated that this virus infects a large part of the world¿s population. In 1995, stawamycin (1), a new natural product from the pyrroloketoindane family was isolated by Miao et. al from a liquid culture of Streptomyces sp, and displayed moderate inhibitory activity against the binding of the EBV BZLF1 transcription factor to DNA with IC50 = 50 mM in a DNA binding assay. Stawamycin has a trisubstituted trans-fused bicyclo[4.3.0]nonane substructure containing five stereogenic centres and a side chain that contains two stereogenic centres at C3 and C9 (absolute configuration not determined), a doubly allylic alcohol and a sodium carboxylate residue. To determine the relative configurations between C3 and C9, to establish the absolute configuration of stawamycin, and to provide material for further biological studies as well as access to novel analogues, we initiated a study towards the synthesis of this very interesting compound. We wish to describe here our successful efforts towards the preparation of the C1¿C6 as well as the C11¿C26 carbocyclic fragment of stawamycin. The bicyclo[4.3.0]nonane (C11¿C26) fragment of stawamycin has been prepared by a sequence involving 14 steps (7% overall yield) from methyl (R)-(-)-3-hydroxy-2- methylpropionate. Key steps are a Pd-catalysed Stille coupling reaction between a vinyl iodide and a vinyl stannane followed by an intramolecular Diels¿Alder cycloaddition reaction to give the desired adduct as the major isomer. The best result was obtained with the use of a triene bearing an achiral oxazolidinone in the presence of Et2AlCl to promote the IMDA cycloaddition reaction. The last step was an preparation of the tricyclic lactone followed by the opening by means of the 2-lítio-N-MEM-pirrol.The (C1¿C6) fragment of stawamycin has been prepared from diethyl-3- hydroxypentanedioate by a sequence which involved a symmetry breaking reaction of a cyclic anhydride, followed by the formation of a Z-vinyliodide employing a Stork-Wittig procedure. / Doutorado / Quimica Organica / Doutor em Ciências