Die Fusion von Membranen erfordert die Verschmelzung von zwei Phospholipiddoppel-schichten, wobei dies über dieselben Zwischenschritte abzulaufen scheint. Eine lokale Störung (‚Stalk’) stellt eine erste Verbindung der äußeren Membranhälften dar, die anschließend lateral expandiert und ein Hemifusionsdiaphragma (HD) bildet. Das Öffnen einer Fusionspore im HD führt zur vollständigen Fusion. Mittels konfokaler Mikroskopie wurde die Fusion von Giant unilamellar vesicles (GUVs) mit negativ geladenen Lipiden und transmembranen (TM) Peptiden in Anwesenheit von zweiwertigen Kationen beobachtet, wobei die Peptide bei der HD Entstehung völlig verdrängt wurden. Eine detaillierte Analyse zeigte, dass es sich bei diesem Mikrometer-großen Bereich um ein HD handelt, dessen Größe von der Lipidzusammensetzung und Peptidkonzentration in den GUVs abhängt. Laterale Lipiddomänen gelten als entscheidend für Signal- und Sortierungsprozesse in der Zelle. Liquid ordered (Lo) Domänen in Modellsystemen wie GUVs ähneln den mit Sphingo-lipiden und Cholesterol angereicherten biologischen Raft-Domänen, allerdings scheinen Membraneigenschaften wie die Lipidpackung sich von biologischen Membranen zu unterscheiden. In diesem Zusammenhang wird die Sortierung des TM-verankerten Hemag-glutinin (HA) des Influenzavirus und von lipidverankerten Ras-Proteinen in GUVs wie auch in abgelösten Plasmamembran-Ausstülpungen (GPMVs) untersucht. HA Protein und TM-Pepitde von HA wurden ausschließlich (GUVs) bzw. vorwiegend (GPMVs) in der liquid disordered (Ld) Domäne gefunden. K-Ras wurde inmitten der Ld detektiert, während N-Ras zur Lo/Ld Grenzlinie diffundierte. Diese Ergebnisse werden im Zusammenhang mit den Unterschieden der Lipidpackung innerhalb der verschiedenen membranverankerten Systeme diskutiert. Es ist wahrscheinlich, dass die Bildung, Größe und Stabilität sowie die physikalischen Eigenschaften der Lipiddomänen in biologischen Membranen stark von Protein-Lipid-Wechsel-wirkungen beeinflusst werden. / Membrane fusion is ubiquitous in life and requires remodelling of two phospholipid bilayers. Fusion likely proceeds through similar sequential intermediates. A stalk between the contacting leaflets forms and radially expands into a hemifusion diaphragm (HD) wherein finally a fusion pore opens up. Direct experimental verification of this key structure is difficult due to its transient nature. Confocal microscopy was used to visualize the fusion of giant unilamellar vesicles (GUVs) comprising negatively charged phosphatidylserine and fluorescent transmembrane (TM) entities in the presence of divalent cations. A complete displacement of TM peptides preceded full fusion. This is consistent with HD formation. Detailed analysis provided proof that the micrometer sized structures are in fact HDs. HD size is dependent on lipid composition and peptide concentration. Lateral lipid domain formation is believed to be essential for sorting and signalling processes in the cell. Liquid ordered (Lo) domains in model systems like GUVs resemble biological rafts enriched in sphingolipids and cholesterol, but their physical properties seem distinct from biological membranes as judged by e.g. lipid order and packing. In this context the sorting of TM anchored influenza virus hemagglutinin (HA) and different lipid anchored Ras proteins is studied in GUVs and giant plasma membrane derived vesicles (GPMVs). Authentic HA or the TM domain peptides were sorted exclusively (GUVs) or predominantly (GPMVs) to the liquid disordered (Ld) domains. Whereas K-Ras was found in the bulk Ld domains, N-Ras diffuses to the Lo/Ld interface. These results are discussed with respect to differences in lipid packing in the different membrane systems and regarding the membrane anchors and their hydrophobic matching. The results suggest that the formation, size and stability as well as the physical properties of lipid domains in biological membranes are tightly regulated by protein-lipid interactions.

S-layer proteins of S. ureae ATCC 13881 form on the cell surface an S-layer lattice with p4 square type symmetry and a period of about 13.5 nm. These lattices were shown to be the excellent nanotemplates for deposition of regular metal clusters. The synthesis of the S. ureae S-layer protein is highly efficient, the protein accounts for approximately 10-15 % of the total cell protein content, judged by the SDS-PAGE results. Besides, the S-layer protein production is tightly regulated, since only negligible amounts of S-layer proteins are observed in the medium at different cell growth phases. At the same time, mechanisms of the regulation of S-layer protein synthesis are poorly understood. As several hundreds of S-layer proteins are produced per second during the cell growth, the S-layer gene promoters are among the strongest prokaryotic promoters at all. However, little is known about factors regulating the expression of S-layer genes, furthermore, no experimental identification of other upstream regulatory sequences except for -35/-10 and RBS sequences was presented to our knowledge to date. A sequence of the S-layer gene of S. ureae ATCC 13881, encoding the previously described S-layer protein, was identified in this work by combination of different approaches. The largest part of the gene, excluding its upstream regulatory and ORF 5’ regions, was isolated from a genomic library by hybridization. The sequence of the isolated fragment proved to contain additionally an 1.9 kb non-coding region and an incomplete 0.8 kb ORF region in its 3’-part. No RBS sequence and apparent promoter regions could be identified in front of the latter sequence, suggesting that it might represent a pseudogene sequence. The sequences of the 5’ and upstream regions of the S. ureae ATCC 13881 S-layer gene were identified by combination of PCR-sequencing and chromosome walking. Totally, a sequence of the 6.4 kb long region of S. ureae genomic DNA was established. The sequence of the S. ureae S-layer protein was deduced from the respective gene sequence and agreed with the peptide sequences, obtained after N-terminal sequencing of tryptic peptides of the S. ureae ATCC 13881 S-layer protein. For the protein the name SslA was proposed, which is an abbreviation for “Sporosarcina ureae S-layer protein A”. Several specific features were observed in gene organisation of sslA, which are also characteristic for other S-layer genes. The distance between the -35/-10 region and the ATG initiation codon is unusually long and a 41 bp palindromic sequence is present in the immediate vicinity of the -35/-10 region. Besides, a distant location of the rho-independent transcription terminator, which is 647 bp remote from the stop codon, will result in the mRNA transcripts with unusually long trailer region. Both the long 5’ UTR and the long 3’ trailer may have a regulatory function, either by conferring increased mRNA stability and/or by affecting translation efficiency. Potentially these sequences may define the binding sites of regulatory proteins. For example, palindromic sequences constitute the regulatory sites in several bacterial operons and may act as the binding sites of regulatory dimeric proteins. In respect to the conservation of the sslA sequence high similarity to the sequences of other functional S-layer genes, especially the slfA and slfB genes of B. sphaericus, was observed, whereas the results of phylogenetic analysis support the hypothesis that S-layer genes may have evolved via the lateral gene transfer. Based on the sslA sequence, several recombinant proteins with truncations of the terminal protein parts or C-terminal fusion of either EGFP or histidine tags were constructed. For all the truncated or EGFP-fusion SslA derivatives high level overexpression in E. coli was possible. For native SslA a moderate level of expression was observed suggesting that its high intracellular concentration may downregulate the protein synthesis. Interestingly, fluorescence microscopy indicates the same intracellular localization for heterologously produced recombinant proteins with fusions of EGFP either to the precursor or to the native SslA protein, suggesting that SslA secretion signal is not functional in E. coli. Heterologously produced SslA derivatives with truncations of N-, C- or both N- and C-terminal parts were shown to self- assemble in vitro, although the size of self-assembly structures was different from that observed upon the self-assembly of the native SslA. In the latter case extended self-assembly layers with the size up to 5x10 µm were observed, with a surface area of up to two orders of magnitude higher than that of S-layer patches, routinely isolated from S. ureae surface. Dependent on the applied recrystallization conditions preferential formation of single- or multilayer self-assembly structures was observed.

Das Ziel dieser Arbeit ist die optische Untersuchung von ferroelektrischen Domänen und Domänenwänden auf lokaler Skala. Dafür wurden neuartige nichtinvasive Ansätze entwickelt, die auf der Anwendung optischer Rastersondenmikroskopie basieren. Die untersuchten Schlüsseleigenschaften umfassen den elektrooptischen Effekt für verschiedene Domänenorientierungen und die Brechungindexänderungen an Domänenwänden an Bariumtitanat-Einkristallen. Die lokale Messung der elektrooptischen Eigenschaften wurde mit räumlich stark begrenzten elektrischen Feldern durchgeführt, die mittels elektrisch leitfähigen Spitzen angelegt wurden. Dieser experimentelle Ansatz erlaubt nicht nur die Messung verschiedener elektrooptischer Koeffzienten, sondern auch die Unterscheidung von allen auftretenden, auch antiparallelen, Domänenausrichtungen. Durch Anlegen eines zusätzlichen elektrischen Feldes mittels der gleichen Spitze konnte auch das ferroelektrische Schalten mit dieser optischen Methode untersucht werden. Die Experimente wurden durch eine numerische Modellierung der elektrischen Feldverteilung und der resultierenden elektrooptischen Antwort begleitet. Die Ergebnisse der Modellierung sind dabei in sehr guter Übereinstimmung mit den experimentellen Ergebnissen. Dies erlaubt auch die Trennung von Beiträgen verschiedener elektrooptischer Koeffzienten und den entsprechenden Feldkomponenten. ür die experimentelle Untersuchung von den theoretisch vorhergesagten Brechungsindexprofilen einzelner Domänenwände, wurde die Sensitivität der optischen Sonde auf lokale Änderungen des Brechungsindex mittels Polarisations- und Positionsmodulation erhöht. Obwohl die Abbildung einer einzelnen Domänenwand nicht gelang, konnte damit zumindest eine obere Grenze für den optischen Effekt einer Domänenwand experimentell gewonnen werden, welche verträglich mit den theoretischen Vorhersagen ist. / The goal of this thesis is the optical investigation of ferroelectric domains and domain walls at the very local scale. For that, novel noninvasive approaches based on optical scanning probe microscopy are developed. The key properties investigated are the electrooptic effect for different domain orientations and refractive-index changes at single domain walls of barium titanate single crystals. The local probing of the electro-optic response is performed with strongly confined electric fields, applied via a conductive tip. With this approach we can not only probe different electro-optic coeffcients, but also identify all occurring domain orientations, even antiparallel ones. The application of additional bias fields by the same tip is used to investigate ferroelectric switching and domain growth by optical means. The experiments are supported by numerical modelling of the electric-field distribution and the resulting electro-optic response. The modelling shows excellent agreement with the measurements, and allows us to separate the contributions of different electro-optic coeffcients and their associated electric-field components. For the experimental observation of the theoretically predicted refractive-index profiles at single ferroelectric domain walls, polarization and position modulation of the optical probe is used to obtain high sensitivity to local modifications of the refractive index. An upper limit to the optical effect to the optical effect of a single domain wall is deduced from the experiment, which is compatible with the effect predicted by theory.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.