El sector de puericultura y ortopédico son sectores de gran relevancia, donde aspectos como el confort, adaptabilidad, calidez, etc. adquieren sentido. Los cauchos basados en silicona líquida (LSR) son clave en estos sectores, ofreciendo interesantes propiedades tanto a nivel técnico como de percepción positiva por parte del usuario. No obstante, la transformación de estos materiales es algo más compleja que el conjunto de plásticos de uso común y además, debido a su naturaleza reticular, resulta un material difícil de reciclar. El proceso de inyección es un proceso de conformado de los materiales poliméricos termoplásticos que representa una notable importancia económica y tecnológica. Bajo estas premisas, el objetivo principal de este trabajo de investigación es el desarrollo de materiales para el sector ortopédico - puericultura a partir del empleo de materiales de naturaleza reticular reversible (elastómeros termoplásticos) que puedan procesarse mediante técnicas de inyección convencionales y que sean capaces de aportar una buena inercia térmica para confort, mediante el empleo de materiales microencapsulados con cambio de fase (PCMs). Para ello, se plantea un conjunto de mezclas de un sistema basado en dos grados comerciales de elastómero termoplástico de SEBS (copolímero en bloque de estireno-etileno/butileno-estireno) con durezas extremas. Ello conlleva el planteamiento de objetivos parciales como la caracterización reológica del sistema (desarrollando un modelo de predicción de comportamiento mediante software de simulación), la modelización del comportamiento mecánico de las mezclas, la optimización del procesado de las mezclas aditivadas con PCMs (analizando la respuesta mecánica y térmica) y el estudio de la inercia térmica de las mismas para la mejora del confort de estos materiales y su potencial empleo en los sectores industriales mencionados, como sustitutos en las aplicaciones de la silicona líquida inyectada. / Juárez Varón, D. (2011). Procesado, modelización y caracterización de mezclas industriales de SEBS con materiales con cambio de fase (PCM) para la mejora del confort térmico en aplicaciones de ortopedia y puericultura [Tesis doctoral]. Editorial Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/11551 / Palancia

Dans le cadre de cette thèse, nous avons réalisé l’étude de systèmes amorphes moléculaires chiraux en évaluant leur vieillissement, leur mobilité ainsi que leur capacité à recristalliser en fonction de la composition énantiomérique du matériau. Pour limiter les facteurs additionnels à la chiralité, ce travail s’est concentré sur des systèmes modèles formant des conglomérats stables : N-acetyl-α-methylbenzylamine (Nac-MBA) et 5-ethyl-5-methylhydantoin (12H). De ces travaux il ressort que l’impact le plus spectaculaire de la chiralité est exprimé dans la propension à la cristallisation ou l’habilité à former un verre (qui augmente de façon inversement proportionnelle de l’excès enantiomérique (ee)). Les cinétiques de vieillissement sont implicitement impactées par l’ee : Celles-ci sont plus lentes pour les ee importants. Enfin, il semble que les processus de relaxation ainsi que les temps associés soient identiques quelle que soit l’ee, bien que le comportement à la cristallisation soit lui significativement impacté. A noter que la signature la plus manifeste de la chiralité dans l’état amorphe du Nac-MBA s’exprime dans l’intensité diélectrique des processus D et α. / In the framework of this thesis, we carried out the study of amorphous chiral molecular systems by evaluating their molecular mobility, the evolution of physical properties during aging and the recrystallization behavior as function of the initial enantiomeric excess (ee). In order to avoid factors additional to chirality itself, we focused on enantiomeric systems forming stable conglomerates (full chiral discrimination in the solid state) by choosing two model compounds: 5-ethy-5-methylhydantoin (12H) and N-acetyl-α-methylbenzylamine (Nac-MBA). From this thesis it was shown that the most spectacular effects of chirality in the amorphous state is expressed in the GFA or the crystallization propensity. The GFA increases as the ee decreases. The kinetics of physical aging is implicitly impacted by chirality. Glassy pure enantiomer requires more time to reach equilibrium than that of an intermediate composition. This situation is hypothetically due to constraints effects mostly resulting from a strong nucleation behavior in the glass state at high ee. Furthermore, the time scale of all the processes (D, α, βJG, γ) and the evolution of their temperature dependency are approximatively identical even though the crystallization behavior is highly impacted by ee. it seems that molecular mobility would not be a key parameter in the crystallization behavior of Nac-MBA. The main expression of chirality in amorphous Nac-MBA is evidenced in the signature of the dielectric strength of both D and α processes.

This dissertation is a composite of some of the research that I have conducted during the course of my PhD study. The larger goal of this dissertation is to renew the interests among the scientific community for an otherwise under-appreciated technique called Isothermal Titration Calorimetry. The resurgence of calorimetry in the biophysical community and the shift to investigations of more complex biological systems signal a real need for more sophisticated analysis techniques. This dissertation expounds on new ITC analysis methods that we have developed as well as results from the study of thermodynamic properties of higher order DNA structures. In 1978, Peter Privalov described the first use of microcalorimetry to obtain the thermodynamic properties for removing calcium from parvalbumin III protein. Fast forward 36 years: modern day electronics, highly efficient thermally conductive and chemically inert materials, in conjunction with sensitive thermal detectors, has transformed the original calorimeter into a device capable of measuring heat changes as small as 0.05 nanowatts, which is equivalent to capturing heat from an incandescent light bulb a kilometer away. However, analytical methods have not kept pace with this technology. Commercial ITC instruments are typically supplied with software that only includes a number of simple interaction models. As a result, the lack of analysis tools for more complex models has become a limiting factor for many researchers. We have recently developed new ITC fitting algorithms that we have incorporated into a userriendly program (CHASM©) for the analysis of complex ITC equilibria. In a little over a year, CHASM© has been downloaded by over 370 unique users. Several chapters in this dissertation demonstrate this software’s power and versatility in the thermodynamic investigations of two model systems in both aqueous and non-aqueous media. In chapter VI, we assembled a model NHE-III1 : a novel structure of Gquadruplex in a double stranded form and studied its structural complexity and binding interactions with a classical G-quaduplex interactive ligand known as TMPyP4. In chapter VII, we reported the thermodynamic properties of a novel PAH system in which weak dispersion forces are solely responsible for formation of the supramolecular complexes.

<div> <div> <div> <p>Transient liquid phase sintering (TLPS) technologies are potential low-temperature solders for sustainable replacements of lead-based solders and high-temperature lead-free solders. Compared to solid-state sintering and lead-free solders, TLPS uses lower temperatures and is, thus, suitable for assembling temperature-sensitive components. TLPS is a non- equilibrium process and determining the kinetics is critical to the estimation of processing times needed for good joining. The tin-indium (Sn-In) system with a eutectic temperature of 119°C is being considered as the basis for a TLPS system when combined with tin. Most models of TLPS include interdiffusion, dissolution, isothermal solidification, and homogenization and are based on simple binary alloys without intermediate phases. The Sn-In system has two intermediate phases and thus the reaction kinetics require additional terms in the modeling. Differential Scanning Calorimetry (DSC) has been used to measure the response of Sn-In alloys during the transient liquid phase reaction. Preparation of tin indium alloys for microstructural analysis is challenging due to their very low hardness. This study uses freeze-fracturing of the tin indium alloys to obtain sections for microstructural analysis. The combination of DSC and microstructure analysis provides information on the reaction kinetics. It was observed that the solid/liquid reaction does not proceed as quickly as desired, that is, substantial liquid remains after annealing even though the overall composition is in the single-phase region in the phase diagram. </p> </div> </div> </div>

No description available.

The large amount of non-degradable plastic waste has become a significant environmental concern, leading to an increased need for degradable plastics. Here in, to create degradable polymers, polyesters were produced through radical ring opening polymerization using cyclic ketene acetals. The cyclic ketene acetal monomer 5,6-benzo-2-methylene-1,3-dioxepane has been prepared for the synthesis of homo- and copolymers with methyl methacrylate, α-methylene-γ-valerolactone, α-methylene-γ-butyrolactone, cholesterol methacrylate and limonene acrylate. The polymerization was conducted using radical ring opening polymerization both in bulk and solution polymerization. The structural characteristics of the polymer were determined by different characterization methodologies, including TGA, DSC, SEC, FTIR and 1D 1H-NMR. The results obtained from 1H-NMR analysis showed the composition of the copolymers. TGA analysis revealed the thermal stability of the polymers and their degradation patterns. DSC analysis provided information about the glass transition temperatures (Tg’s) of the polymers. Moreover, the Tg indicated the presence and amounts of comonomers in the copolymers. Overall, the results showed the influence of different comonomers on the properties of the polymers by successfully incorporating the comonomers in the polymer. The thermal properties for polymers containing methyl methacrylate became more thermally stable. The Tg, analyzed with DSC, shifted from the Tg of homopolymers indicating the incorporation of both monomers. The polymers were successfully degraded via hydrolysis in alkaline conditions breaking them down into smaller pieces making them easier to recycle. To conclude, the results all indicate that the incorporation of BMDO and thereby possibly other CKA-monomers into the polymer chains of commonly used plastics could provide valuable tools in the recycling of said plastics.

Additives, incorporated in film coating formulations, and their process parameters are generally selected using a trial-and-error approach. However, coating problems and defects, especially those associated with aqueous coating systems, indicate the necessity of embracing a quality-by-design approach to identify the optimum coating parameters. In this study, the feasibility of using thermal and rheological measurements to help evaluate and design novel coating formulations has been investigated. Hydroxypropyl methylcellulose acetate succinate (HPMCAS), an enteric coating polymer, was used as the film forming polymer. Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), and Parallel Plate Shear Rheometery (PPSR) were used to evaluate the effect of different plasticisers on the performance of HPMCAS. The results illustrate that, for identical formulations, the DSC and DMA methods yielded up to 40% differences in glass transition temperature (Tg) values. Moreover, Tg measured using loss modulus signals were always 20-30 oC less than those measured using tan delta results in DMA testing. Absolute and relative Tg values can significantly vary depending on the geometry of the samples, clamp size, temperature ramping rate and the frequency of the oscillations. Complex viscosity data for different formulations demonstrated a variable shear thinning behaviour and a Tg independent ranking. It is, therefore, insufficient to rely purely on Tg values to determine the relative performance of additives. In addition, complex viscosity results, obtained using both the DMA and PPSR techniques at similar temperatures, are shown to be comparable. The results from both techniques were therefore used to produce continuous master curves for the HPMCAS formulations. Additionally, step strain tests showed that HPMCAS chains do not fully III disentangle after 105 seconds as predicted by the Maxwell model. Finally, in situ aqueous-based coating experiments proved that mixtures of triethyl acetyl citrate and acetylated monoglyceride (TEAC/AMG), even without cooling of the suspension, do not cause blocking of the spray nozzle whereas triethyl citrate (TEC) based formulae did. TEAC (alone or in a combination with AMG) exhibits superior wettability to HPMCAS than TEC/AMG formulations and can be used to enhance the efficiency and film quality of the dry coating process.

In our highly digitalized society, the dependence on digital solutions and systems is integral to the function of society. While digitalization has brought numerous benefits, it has also exposed society to vulnerabilities, making it susceptible to cyberattacks. The structure of vital societal functions, involving private subcontractors and long and digital supply chains. Along with the cooperation between public and private entities having inherent weaknesses it has created a vulnerable system. As vital societal functions bear the responsibility for public services and the protection of the personal information in their possession, it is crucial that they remain open to critical examination. Due to the complexity of cybersecurity and closely related subjects, the media plays an important role in conveying a nuanced depiction of the hacker attacks and establishing important connections to closely related discourses. This is essential for fostering critical examination and public debate, especially considering the assumed limited prior knowledge of the public. This thesis examines in what way cyberattacks against vital societal functions are portrayed in the Swedish media discourses and what connections to closely related discourses are being made. The focus is specifically on New Public Management, Public-Private Partnership, and Digital Supply Chains. Through a discourses analysis using an analytical framework inspired by Carol Bacchi, this thesis concludes that cyberattacks against vital societal functions are represented in a simplified way. The vital connections to other discourses are few and weak, resulting in a content-poor discourse that possibly hinders both critical examination and a public discussion on the subject.

No description available.

Plastskräp har blivit ett global problem på grund av nedskräpning och otillräcklig avfallshantering. Användning av biologiskt nedbrytbart material kan underlätta problemet, även om det inte är en universallösning. Produkter gjorda av biologiskt nedbrytbart material skall ändå till avfallshantering eftersom nedbrytningen kan vara långvarig och variera mycket beroende av omgivningen. Därmed är användningen av biologiskt nedbrytbart material endast berättigat då det är svårt att samla in materialet eller avskilja det från organiskt material. Studiens mål var att undersöka biologiskt nedbrytbara material som kan användas i produkter som fungerar under många olika driftsförhållanden och inte kan återställas efter användning. I den litterära delen av denna studie definieras nedbrytning genom egenskaper och förhållanden som påverkar nedbrytningsprocessen. Nedbrytning av polyestrar och cellulosa och de standardprocessarna som används i nedbrytningsexperimenten betraktades. Standardprocesserna för nedbrytning studerades för att få en klarare inblick i den eftertraktade nedbrytningsgraden och de standardiserade förhållandena för nedbrytningen i olika miljöer. En sammanfattning av olika nedbrytningsexperiment och analysmetoder är också inkluderade för att försäkra att experimenten som utfördes är både giltiga och jämförbara med andra forskningsresultat inom fältet. I detta forskningsprojekt utfördes nedbrytningsexperiment i färskvatten- och hemkompostmiljöer. Målet med projektet var att bedöma ifall materialen kunde brytas ned i ett brett spektrum av miljöer, ifall de var mindre skadliga för naturen än konventionella material som används av dagens industri och för att uppskatta nedbrytningstakten. Nedbrytningstiden var 140 dagar och experimentet utfördes med 10 olika material: betecknade som A-J. Materialen analyserades 8 gånger under nedbrytningsperioden förutom materialen I och J som analyserades en gång efter 140 dagar. Materialen analyserades mekaniskt, strukturellt och termiskt med hjälp av dragprovning, FTIR och DSC. Provernas viktförändring bestämdes också. Nedbrytning observerades visuellt från provernas yta och genom mekaniska prover. Materialen som placerades i hemkomposten visade klara tecken på nedbrytning då färgen hade förändrats och förstärkningsfibrerna hade blivit synliga. Materialen som placerats i hemkompostmiljö visade också klara tecken på tillväxt av mikroorganismer och biomassa som uppstått på ytan av materialen. Sammanfattningsvist, visade materialen B, C och G de mest lovande resultaten med klara tecken på biologisk nedbrytning och de hade en snabbare nedbrytningstakt än de andra materialen som undersöktes. Material D visade klara tecken på biologisk nedbrytning på ytan men dess nedbrytningstakt var uppskattad att vara mycket långsammare. Därmed rekommenderas det att använda material A, B, D och G istället för konventionella icke biologiskt nedbrytbara material. Dessa material har potential att sänka den negativa inverkan och de långsiktiga riskerna av plastskräp för miljön. / Plastic debris has become a global crisis due to littering and misplaced waste management. The use of biodegradable materials can ease the problem, but it is not always the answer. Products made of biodegradable materials are still to be waste managed since biodegradation can be a long process and is highly dependent on the environment conditions. Hence, the use of biodegradable materials is justified only when retrieving the product after use is impossible or prohibitively expensive or separating it from organic matter is difficult. This study was made to investigate biodegradable materials that can be used in products that are operating in broad range of operational conditions and cannot be retrieved back after use in most cases. In the literature part of this study the biodegradation is defined along with properties and conditions that affect the biodegradation process. Biodegradation of polyesters and cellulose, and standards used in the biodegradation experiments were reviewed. Biodegradation standards were studied in order to have a clearer picture of the pursued degree of biodegradation and standardized properties in the biodegradation experiments. Review of different biodegradation tests and analysis methods are included as well to ensure that the experiments performed in this work are valid and comparable with other biodegradation studies.  In this study, the biodegradation experiment was conducted in freshwater and home compost environments. The aim was to determine if the materials were able to biodegrade in wide range of environments, to make sure they are less harmful than the conventional materials used in the industry and to estimate the rate of biodegradation. The duration of the experiments were 140 days with 10 different materials: A – J. The materials were analyzed 8 times during the aging period, except materials I and J, which were analyzed only once after 140 days. The samples were analyzed mechanically, structurally, and thermally using tensile test, FTIR and DSC measurements, respectively. Also, the samples weight changes were analyzed.  The degradation was visually observed from the surfaces of the samples and from mechanical testing in both experimental environments. Home compost environment showed clear signs of biodegradation where reinforcement fibers became visible and changed the color of some of the samples. Also, home compost samples had microorganisms growing on them, and biomass was developing around them. To conclude, material B, C and G had the most promising results with clear signs of biodegradation and had faster estimated biodegradation rate compared with the other studied materials. Material D had signs of biodegradation on the surface as well. However, the biodegradation rate was estimated to be much slower. In conclusion, it is recommended to use the studied materials A, B, D and G instead of the conventional non-biodegradable polymers. These materials have potential to lower the negative impact and long-term risks of plastic debris to the environment.