This dissertation thesis deals with the methods for processing image data in X-ray microtomography and digital holographic microscopy. The work aims to achieve significant acceleration of algorithms for tomographic reconstruction and image reconstruction in holographic microscopy by means of optimization and the use of massively parallel GPU. In the field of microtomography, the new GPU (graphic processing unit) accelerated implementations of filtered back projection and back projection filtration of derived data are presented. Another presented algorithm is the orientation normalization technique and evaluation of 3D tomographic data. In the part related to holographic microscopy, the individual steps of the complete image processing procedure are described. This part introduces the new orignal technique of phase unwrapping and correction of image phase damaged by the occurrence of optical vortices in the wrapped image phase. The implementation of the methods for the compensation of the phase deformation and for tracking of cells is then described. In conclusion, there is briefly introduced the Q-PHASE software, which is the complete bundle of all the algorithms necessary for the holographic microscope control, and holographic image processing.

Remote communication methods have been changing these years and becoming even more important due to the global pandemic. Holographic communication, often represented by volumetric video, is one of the emerging communication methods. Unfortunately, there are few researches on combining 3D objects with volumetric videos. Based on a review of 3D object manipulation methods, two input modalities including laptop trackpad and mobile touchscreen are selected to combine with the volumetric video production. This study aims to explore human factors in volumetric video production and determines the differences between different 3D object input modalities in volumetric video production. A prototype of a volumetric video production tool is built and refined. NASA-TLX, SUS sub-scale, and semi-structured interview are performed in a pilot study and the main study, in order to measure the perceived workload and learnability of the prototype. Analysis of the subjective data demonstrates that there are no significant differences between those two input modalities. Several implications for the design and research gap of combining 3D object manipulation with volumetric video production have been brought up based on the results of this study. / Metoder för fjärrkommunikation har förändrats under dessa år och blivit ännu viktigare på grund av den globala pandemin. Holografisk kommunikation, ofta representerad av volymetrisk video, är en av de framväxande kommunikationsmetoderna. Tyvärr finns det få undersökningar om att kombinera 3D-objekt med volymetriska videor. Baserat på en genomgång av 3D-objektmanipulationsmetoder, väljs två inmatningsmodaliteter inklusive styrplatta för bärbar dator och mobil pekskärm för att kombineras med den volymetriska videoproduktionen. Denna studie syftar till att utforska mänskliga faktorer i volymetrisk videoproduktion och fastställa skillnaderna mellan olika 3D-objektinmatningsmodaliteter i volymetrisk videoproduktion. En prototyp av ett volymetriskt videoproduktionsverktyg byggs och förfinas. NASA-TLX, SUS sub-scale och semi-strukturerad intervju utförs i en pilotstudie och huvudstudien, för att mäta den upplevda arbetsbelastningen och inlärbarheten av prototypen. Analys av subjektiva data visar att det inte finns några signifikanta skillnader mellan dessa två inmatningsmodaliteter. Flera implikationer för design- och forskningsgapet av att kombinera 3D-objektmanipulation med volymetrisk videoproduktion har tagits upp baserat på resultaten av denna studie.

We study a free quantum scalar field in the BTZ spacetime as a model of the AdS/CFT correspondence for black holes, and show the essential steps in computing Bogolyubov coefficients between modes on either side of the wormhole. As background, we review the BTZ geometry in standard, Kruskal and Poincaré coordinates, holographic renormalisation of the dual field theory and canonical quantisation in curved spacetime. / Vi studerar ett fritt skalärt kvantfält i BTZ-rumtiden som en modell av AdS/CFT-dualiteten för svarta hål och visar huvudstegen i beräkningen av Bogolyubov-koefficienter mellan moder på olika sidor av maskhålet. Som bakgrund redogör vi för BTZ-geometrin i standard-, Kruskal- och Poincarékoordinater, holografisk renormering av den duala fältteorin och kanonisk kvantisering i krökt rumtid.

[pt] Este trabalho tem como objetivo apresentar o desenvolvimento de uma antena HAIA (Holographic Artificial Impedance Antenna) para potenciais aplicações em sistemas de satélites nas bandas X (8 - 12 GHz) e Ku (12 - 18 GHz), bem como na frequência de terahertz. Como prova de conceito, o protótipo é criado para operar na banda K (18 - 27 GHz), especificamente na frequência de 18,4 GHz. O HAIA é um tipo de antena com ondas vazadas, com um princípio operacional único para radiação de feixe controlado. Devido às suas amplas propriedades de radiação, o grau de liberdade do projeto nos permite explorar o comportamento de resposta da antena e diferentes parâmetros para sua modelagem são estudados. O projeto da antena obedece à teoria estabelecida para a radiação de ondas vazadas na conversão de uma onda de superfície para uma onda com vazamento, onde uma AIS (Artificial Impedance Surface) é caracterizada e distribuída em um substrato dielétrico usando o princípio holográfico desenvolvido no sistema óptico. A fim de minimizar as dimensões da antena, uma fonte planar é estudada para gerar uma onda de superfície e comparada com o desempenho da alimentação de onda de superfície convencional neste tipo de estrutura. Os diferentes projetos são avaliados para a conclusão do melhor resultado e comparados com outros trabalhos. O protótipo final é fabricado para testes experimentais, onde os resultados provam que a antena projetada responde às características modeladas, com uma boa concordância entre os resultados simulados e medidos. / [en] This work aims to present the development of a holographic artificial impedance antenna (HAIA) for potential applications in satellite systems in the X (8 - 12 GHz) and Ku (12 - 18 GHz) bands, as well as in the frequency of terahertz. As a proof of concept, the prototype is created to operate in the K (18 - 27 GHz) band, specifically at the design frequency of 18.4 GHz. HAIA is a kind of leaky-wave antenna (LWA) with a unique operating principle for controlled beam radiation. Due to their radiation characteristics are broad, and the degree of design freedom allows us to explore the antenna performance, different parameters are studied for modeling. The antenna design obeys the established theory for the leaky-wave radiation in the conversion of a surface wave into a leaky-wave, where an artificial impedance surface (AIS) is characterized and distributed on a dielectric substrate using the holographic principle developed in the optical system. In order to minimize the dimensions of the HAIA, a planar surface wave launcher is studied and compared with the performance of conventional surface wave feeding used in this type of structure. A series of designs are evaluated for the conclusion of the best result and compared with other works. The final prototype is manufactured for experimental tests, where the results show that the designed antenna responds to the modeled characteristics with a good agreement between the simulated and measured results.

We develop a theory of vectorial wave coupling in cubic photorefractive crystals placed in an alternating ac-field to enhance the nonlinear response. First we analytically and numerically investigate the dependences of the first Fourier harmonics of the space-charge field, induced in an AC-biased sillenite crystal by a light-interference pattern, on the light contrast m. The data obtained was used to extend the vectorial beam-coupling theory on the whole contrast region. In particular, we proved in the general case that despite of essential differences between thediffusion and AC nonlocal responses the later keeps the light interference fringes straight during the interaction. This fundamental feature allows, under certain restrictions, to reduce the nonlinear problem of vectorial coupling to the known linear problem of vectorial Bragg diffraction from a spatially uniform grating, which admits an exact solution. As a result, the nonlinear vectorial problem can be effectively solved for a number of practically important cases.The developed theory was applied to describe the transformation of a momentary phase changes of one of the input beams into the output intensity modulation (so-called grating translation technique). In contrast to the previous studies, we take into account the change of the space-charge field amplitude across the crystal (the coupling effects). The theory developed is employed to optimize the conditions for the linear signal detection under polarization filtering for the transverse and longitudinal optical configurations. We also analyze the possibility of the linear detection without polarization filtering.Illumination of AC-biased photorefractive BTO crystals with a coherent light beam results in development of strong nonlinear scattering. We investigate the angular and polarization characteristics of the scattered light for the diagonal optical configuration and different polarization states of the pump.

In der vorliegenden Arbeit werden die nichtlinearen optischen Eigenschaften der Materialien Lithiumniobat und Di-Zinn-Hexathiohypodiphosphat aufgrund der Suszeptibilität 3. Ordnung und kleiner Polaronen untersucht. Zudem wird gezeigt, dass die Interferenz verschiedenfarbiger Laserpulse die Aufzeichnung von statischen und dynamischen holographischen Gittern ermöglicht. Ein Teil dieser Arbeit ist in den im Anhang angegebenen 6 Publikationen bereits veröffentlicht. Lithiumniobat wird mit einer Erweiterung des Z-Scan Experiments untersucht, welches die Pulslängenabhängige Messung der nichtlinearen Absorption und der nichtlinearen Brechungsindexänderung ermöglicht. Dabei konnte festgestellt werden, dass bei sehr kurzen Pulslängen von 70 fs ein Effekt der Polaronen auf die nichtlineare Absorption vernachlässigbar ist und die Zwei-Photonen-Absorption die nichtlineare Absorption dominiert. Mit größerer Pulslänge gibt es allerdings Abweichungen zwischen der Theorie der Zwei-Photonen-Absorption und den Messergebnissen. Mit der Entwicklung eines Polaronen-Anregungs-Modells, welches eine polaronische Absorption aufgrund wiederholtem optisch induziertem Hopping annimmt, konnte dieser Effekt konsistent erklärt werden. Die Messungen der nichtlinearen Brechungsindexänderung lassen darauf schließen, dass sowohl freie Ladungsträger als auch kleine Polaronen neben der Suszeptibilität 3. Ordnung einen Einfluss auf die Brechungsindexänderung haben, da eine nichtlineare Abhängigkeit von der Intensität auch bei Pulslängen von 70 fs festgestellt werden konnte. Analog dazu konnte in Di-Zinn-Hexathiohypodiphosphat ein großer Zwei-Photonen-Absorptionskoeffizient festgestellt werden, welcher für Photonenenergien nahe der Bandkante Werte zeigt, die größer sind als theoretischen Überlegungen zeigen. Eine transiente Absorption nach optischer Anregung, gemessen durch ein Anreg-Abtast-Experiment, sowie Literatur legen nahe, dass in Di-Zinn-Hexathiohypodiphosphat gebundene Lochpolaronen durch optische Anregung entstehen können. Durch den hohen Zwei-Photonen-Absorptionskoeffizienten konnte das Aufzeichnen eines kontrastreichen, dynamischen Amplitudengitters mittels Femtosekundenpulsen gezeigt und nachgewiesen werden. Die Kürze der Femtosekundenpulse ermöglicht aber nicht nur das Aufzeichnen eines Zwei-Photonen-Absorptionsgitters aufgrund der hohen Intensitäten, sondern erlaubt zudem die Beobachtung von Interferenz zwischen verschiedenfarbigen Pulsen. In der Zeitspanne der Pulslänge beträgt die Bewegung der Interferenzstreifen, welche in der Größenordnung der Lichtgeschwindigkeit liegt, nur ein Bruchteil der Streifendistanz, sodass das Interferenzmuster eingefroren und beobachtbar erscheint. Somit lassen sich statische Hologramme in holographischen Filmen, wie auch dynamische Hologramme aufzeichnen. Über ein dynamisches holographisches Gitter mittels Zwei-Photonen-Absorption konnte so eine Frequenzkonversion durch Dopplerverschiebung in Lithiumniobat gezeigt werden.

Le domaine du photovoltaïque en couches minces s’attache à réduire le coût de l’énergie photovoltaïque, en réduisant considérablement la quantité de matières premières utilisées. Dans le cas du silicium cristallin en couches minces, la réduction de l’épaisseur de la cellule s’accompagne d’une baisse drastique de l’absorption, notamment pour les plus fortes longueurs d’onde. Nombreuses sont les techniques aujourd’hui mises en œuvre pour lutter contre cette baisse de performance, dont l’utilisation des effets plasmoniques induits par des nanostructures métalliques qui permettent un piégeage de la lumière accru dans la couche absorbante. Dans ces travaux, nous étudions l’influence de nanostructures d’argent organisées suivant un réseau périodique sur l’absorption d’une couche de silicium. Ces travaux s’articulent autour de deux axes majeurs. L’influence de ces effets plasmoniques sur l’absorption est d’abord mise en évidence à travers différentes simulations numériques réalisées par la méthode FDTD. Nous étudions ainsi les cas de réseaux périodiques finis et infinis de nanostructures d’argent situés sur la face arrière d’une couche mince de silicium. En variant les paramètres du réseau, nous montrons que l’absorption au sein du silicium peut être améliorée dans le proche infrarouge, sur une large plage de longueurs d’onde. Le second volet de la thèse concerne la réalisation des structures modélisées. Pour cela, deux voies de fabrication ont été explorées et développées. Pour chacune d’entre elles, trois briques élémentaires ont été identifiées : (i) définition du futur motif du réseau grâce à un masque, (ii) réalisation de pores dans le silicium et (iii) remplissage des pores par de l’argent pour former le réseau métallique. La première voie de fabrication développée fait appel à un masque d’alumine, réalisé par l’anodisation électrochimique d’une couche d’aluminium, pour définir les dimensions du réseau métallique. Une gravure chimique assistée par un métal est ensuite utilisée pour former les pores, qui seront alors comblés grâce à des dépôts d’argent par voie humide. La seconde voie de fabrication utilise un masque réalisé par lithographie holographique, une gravure des pores par RIE et un remplissage des pores par dépôt d’argent electroless. Les substrats plasmoniques fabriqués sont caractérisés optiquement, au moyen d’une sphère intégrante, par des mesures de transmission, réflexion et absorption. Pour tous les substrats plasmoniques caractérisés, les mesures optiques montrent une baisse de la réflexion et de la transmission et une hausse de l’absorption pour les plus grandes longueurs d’onde. / Thin-film photovoltaics focus on lowering the cost reduction of photovoltaic energy through the significant reduction of raw materials used. In the case of thin-films crystalline silicon, the reduction of the thickness of the cell is linked to a drastic decrease of the absorption, particularly for the higher wavelengths. This decrease of the absorption can be fought through the use of several different light trapping methods, and the use of plasmonic effects induced by metallic nanostructures is one of them. In this work, we study the influence of a periodic array of silver nanostructures on the absorption of a silicon layer. This work is decomposed into two main axes. First, the influence of the plasmonic effects on the silicon absorption is highlighted through different numerical simulations performed by the FDTD method. Both finite and infinite arrays of silver nanostructures, located at the rear side of a thin silicon layer, are studied. By varying the parameters of the array, we show that the silicon absorption can be improved in the near infrared spectral region, over a wide range of wavelengths. The second part of the thesis is dedicated to the fabrication of such modeled structures. Two different approaches have been explored and developed inside the lab. For each of these two strategies, three major building blocks have been identified: (i) definition of the future array pattern through a mask, (ii) etching of the pattern in the silicon layer and (iii) filling of the pores with silver in order to form the metallic array of nanostructures. In the first fabrication method, an anodic alumina mask, produced by the electrochemical anodization of an aluminium layer, is used in order to define the dimensions of the metallic array. A metal assisted chemical etching is then performed to produce the pores inside the silicon, which will then be filled with silver through a wet chemical process. The second fabrication method developed involves the use of holographic lithography to produce the mask, the pores in silicon are formed by reactive ion etching and they are filled during an electroless silver deposition step. The fabricated plasmonic substrates are optically characterized using an integrating sphere, and transmission, reflection and absorption are measured. All the characterized plasmonic substrates shown a decrease of their reflection and transmission and an absorption enhancement at the largest wavelengths.

<p>We discuss various aspects of D-branes in string theory and holography in string theory and loop quantum gravity. </p><p>One way to study D-branes is from a microscopic perspective, using conformal field theory techniques. For example, we investigate the question of how D-branes can be introduced into orbifolded theories. Another way to study D-branes is from a space-time perspective. An example is provided by unstable D-branes, where we compute an effective action describing the decay of a bosonic D-brane. </p><p>The holographic principle is a proposed duality which suggests that a theory in any region has a dual description on the boundary. We explore two examples: (1) The area law for the entropy of a black hole in the framework of loop quantum gravity, related to particular regularizations of the area operator. (2) The AdS/CFT correspondence proposal, where we investigate a string pulsating on AdS using spin chains.</p>

We discuss various aspects of D-branes in string theory and holography in string theory and loop quantum gravity. One way to study D-branes is from a microscopic perspective, using conformal field theory techniques. For example, we investigate the question of how D-branes can be introduced into orbifolded theories. Another way to study D-branes is from a space-time perspective. An example is provided by unstable D-branes, where we compute an effective action describing the decay of a bosonic D-brane. The holographic principle is a proposed duality which suggests that a theory in any region has a dual description on the boundary. We explore two examples: (1) The area law for the entropy of a black hole in the framework of loop quantum gravity, related to particular regularizations of the area operator. (2) The AdS/CFT correspondence proposal, where we investigate a string pulsating on AdS using spin chains.

Dans les systèmes optiques modernes, l'importance des composants holographiques ne cesse d'augmenter. Parmi les matériaux holographiques disponibles, la gélatine bichromatée se distingue par la très bonne qualité des hologrammes obtenus. Cette thèse décrit la mise au point de techniques de fabrication et de caractérisation de composants holographiques en gélatine bichromatée. L'interprétation des mesures de caractérisation s'appuie sur une modélisation approfondie de la diffraction par des structures périodiques: une nouvelle méthode de résolution de la théorie d'ondes couplées, plus stable numériquement que les précédentes, est proposée. De plus, la théorie de la diffraction par des réseaux est étendue a des cas importants de restitution en lumière quasi-monochromatique. Les dispositifs expérimentaux développés ont permis l'étude et la réalisation de quatre nouveaux types d'hologrammes: réseaux pour la compression temporelle d'impulsions ultra brèves, hologramme synthétique séparateur et uniformiseur de faisceau laser, lentille holographique pour diode laser infrarouge et hologramme en ligne pour la réplication globale de disques compacts.