Ziel dieser Arbeit ist zunächst die Entwicklung einer Vergleichsgrundlage, auf Basis derer Algorithmen zur Berechnung der Zustandsdichte verglichen werden können. Darauf aufbauend wird ein bestehendes übergangsmatrixbasiertes Verfahren für das großkanonisch Ensemble um ein neues Auswerteverfahren erweitert. Dazu werden numerische Untersuchungen verschiedener Monte-Carlo-Algorithmen zur Berechnung der Zustandsdichte durchgeführt. Das Hauptaugenmerk liegt dabei auf Verfahren, die auf Übergangsmatrizen basieren, sowie auf dem Verfahren von Wang und Landau. Im ersten Teil der Forschungsarbeit wird ein umfassender Überblick über Monte-Carlo-Methoden und Auswerteverfahren zur Bestimmung der Zustandsdichte sowie über verwandte Verfahren gegeben. Außerdem werden verschiedene Methoden zur Berechnung der Zustandsdichte aus Übergangsmatrizen vorgestellt und diskutiert. Im zweiten Teil der Arbeit wird eine neue Vergleichsgrundlage für Algorithmen zur Bestimmung der Zustandsdichte erarbeitet. Dazu wird ein neues Modellsystem entwickelt, an dem verschiedene Parameter frei gewählt werden können und für das die exakte Zustandsdichte sowie die exakte Übergangsmatrix bekannt sind. Anschließend werden zwei weitere Systeme diskutiert für welche zumindest die exakte Zustandsdichte bekannt ist: das Ising Modell und das Lennard-Jones System. Der dritte Teil der Arbeit beschäftigt sich mit numerischen Untersuchungen an einer Auswahl der vorgestellten Verfahren. Auf Basis der entwickelten Vergleichsgrundlage wird der Einfluss verschiedener Parameter auf die Qualität der berechneten Zustandsdichte quantitativ bestimmt. Es wird gezeigt, dass Übergangsmatrizen in Simulationen mit Wang-Landau-Verfahren eine wesentlich bessere Zustandsdichte liefern als das Verfahren selbst. Anschließend werden die gewonnenen Erkenntnisse genutzt um ein neues Verfahren zu entwickeln mit welchem die Zustandsdichte mittels Minimierung der Abweichungen des detaillierten Gleichgewichts aus großen, dünnbesetzten Übergangsmatrizen gewonnen werden kann. Im Anschluss wird ein Lennard-Jones-System im großkanonischen Ensemble untersucht. Es wird gezeigt, dass durch das neue Verfahren Zustandsdichte und Dampfdruckkurve bestimmt werden können, welche qualitativ mit Referenzdaten übereinstimmen.

In this work, stretchable magnetic sensorics is successfully established by combining metallic thin films revealing a giant magnetoresistance effect with elastomeric materials. Stretchability of the magnetic nanomembranes is achieved by specific morphologic features (e.g. wrinkles), which accommodate the applied tensile deformation while maintaining the electrical and magnetic integrity of the sensor device. The entire development, from the demonstration of the world-wide first elastically stretchable magnetic sensor to the realization of a technology platform for robust, ready-to-use elastic magnetoelectronics with fully strain invariant properties, is described. The prepared soft giant magnetoresistive devices exhibit the same sensing performance as on conventional rigid supports, but can be stretched uniaxially or biaxially reaching strains of up to 270% and endure over 1,000 stretching cycles without fatigue. The comprehensive magnetoelectrical characterization upon tensile deformation is correlated with in-depth structural investigations of the sensor morphology transitions during stretching. With their unique mechanical properties, the elastic magnetoresistive sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. This feature leads electronic skin systems beyond imitating the characteristics of its natural archetype and extends their cognition to static and dynamic magnetic fields that by no means can be perceived by human beings naturally. Various application fields of stretchable magnetoelectronics are proposed and realized throughout this work. The developed sensor platform can equip soft electronic systems with navigation, orientation, motion tracking and touchless control capabilities. A variety of novel technologies, like smart textiles, soft robotics and actuators, active medical implants and soft consumer electronics will benefit from these new magnetic functionalities.:Outline List of abbreviations 7 1. INTRODUCTION 1.1 Motivation and scope of this work 8 1.1.1 A brief review on stretchable electronics 8 1.1.2 Stretchable magnetic sensorics 10 1.2 Technological approach 11 1.3 State-of-the-art 12 2. THEORETICAL BACKGROUND 2.1 Magnetic coupling phenomena in layered structures 14 2.1.1 Magnetic interlayer exchange coupling 14 2.1.2 Exchange bias 15 2.1.3 Orange peel coupling 16 2.2 Giant magnetoresistance 17 2.2.1 Electronic transport through ferromagnets 17 2.2.2 The GMR effect 19 2.2.3 GMR multilayers 20 2.2.4 Spin valves 21 2.3 Theory of elasticity 22 2.3.1 Elastomeric materials 22 2.3.2 Stress and strain 23 2.3.3 Rubber elasticity 25 2.3.4 The Poisson effect 26 2.3.5 Viscoelasticity 27 2.3.6 Bending strain in a stiff film on a flexible support 27 2.4 Approaches to stretchable electronic systems 28 2.4.1 Microcrack formation 28 2.4.2 Meanders and compliant patterns 29 2.4.3 Surface wrinkling 30 2.4.4 Rigid islands 32 3. METHODS & MATERIALS 3.1 Sample fabrication 34 3.1.1 Polydimethylsiloxane (PDMS) 34 3.1.2 PDMS film preparation 35 3.1.3 Lithographic structuring on the PDMS surface. 36 3.1.4 Magnetic thin film deposition 38 3.1.5 GMR layer stacks 40 3.1.6 Mechanically induced pre-strain 43 3.1.7 Methods and materials for the direct transfer of GMR sensors 45 3.1.8 Materials used for imperceptible GMR sensors 47 3.2 Characterization 48 3.2.1 GMR characterization setup with in situ stretching capability 48 3.2.2 Sample mounting 50 3.2.3 Electrical contacting of stretchable sensor devices 51 3.2.4 Customized demonstrator electronics 52 3.2.5 Microscopic investigation techniques 53 4. RESULTS & DISCUSSION 4.1 GMR multilayer structures on PDMS 54 4.1.1 Pre-characterization 54 4.1.2 Thermally induced wrinkling 55 4.1.3 Self-healing effect 57 4.1.4 Demonstrator: Magnetic detection on a curved surface 60 4.1.5 Sensitivity enhancement 61 4.1.6 GMR sensors in circumferential geometry 64 4.1.7 Stretchability test 67 4.2 Stretchable spin valves 69 4.2.1 Random wrinkles and periodic fracture 70 4.2.2 GMR characterization 73 4.2.3 Stretching of spin valves 74 4.2.4 Microcrack formation mechanism 76 4.3 Direct transfer printing of GMR sensorics 81 4.3.1 The direct transfer printing process 82 4.3.2 Direct transfer of GMR microsensor arrays 84 4.3.3 Direct transfer of compliant meander shaped GMR sensors 86 4.4 Imperceptible magnetoelectronics 89 4.4.1 GMR multilayers on ultra-thin PET membranes 89 4.4.2 Imperceptible GMR sensor skin 92 4.4.3 Demonstrator: Fingertip magnetic proximity sensor 93 4.4.4 Ultra-stretchable GMR sensors 94 4.4.5 Biaxial stretchability 99 4.4.6 Demonstrator: Dynamic detection of diaphragm inflation 101 5. CONCLUSIONS & OUTLOOK 5.1 Achievements 102 5.2 Outlook 104 5.2.1 Further development steps 104 5.2.2 Prospective applications. 105 5.3 Technological impact: flexible Bi Hall sensorics 106 5.3.1 Application potential 106 5.3.2 Thin and flexible Hall probes 107 5.3.3 Continuative works and improvements 108 5.4 Activities on technology transfer and public relations 108 Appendix References 110 Selbständigkeitserklärung 119 Acknowledgements 120 Curriculum Vitae 121 Scientific publications, contributions, patents, grants & prizes 122

This thesis provides a systematic guideline for evaluating, integrating and designing the collaborative end effector system associated with commercially available collaborative robots (cobots). On the basis of ISO/TS 15066:2016, customers’ demands are categorised as a macro demand framework and micro demand variables, which are parameterised and hierarchised. By analysing these parameters, the collaborative degree is determined to correlate the hazards with protection measures, which can demonstrate the collaborative safety level transparently. After that, the safety protection measures are specifically proposed corresponding to the potential risks. Finally, an industrial application is evaluated, a novel adapter utilised on the UR5 cobot is illustrated, and its characteristics for the collaborative operation are described.:1 Introduction 2 Robotic end effector in Assembly and Handling 3 Concept and Definition of Collaboration 4 Statement of the academic purpose and methodology 5 Guideline and Methodology for designing the Active Lightweight End-effector (ALE) for collaborative robots 6 Performance demand d4): multiplicity and versatility of end effector 7 A safety monitoring end effector (Adapter) for collaborative operations 8 A practical study of collaborative integration based on collaborative degree 9 Conclusion Appendix / Diese Arbeit liefert einen systematischen Leitfaden für die Bewertung, Integration und Gestaltung des kollaborierenden Endeffektorsystems in Verbindung mit kommerziell verfügbaren kollaborativen Robotern (Kobots). Auf der Grundlage der ISO/TS 15066:2016 werden die Anforderungen der Kunden in einen Makro-Bedarfsrahmen und Mikro-Bedarfsvariablen kategorisiert, die parametrisiert und hierarchisiert werden. Durch die Analyse dieser Parameter wird der Kollaborationsgrad ermittelt, um die Gefährdungen mit Schutzmaßnahmen zu korrelieren, die die kollaborierende Sicherheitsstufe transparent darstellen können. Danach werden die Schutzmaßnahmen entsprechend den potenziellen Risiken vorgeschlagen. Schließlich wird ein industrieller Anwendungsfall bewertet, ein neuartiger Adapter für den Einsatz an einem Roboter UR5 erläutert und dessen Kenndaten für den kollaborierenden Betrieb beschrieben.:1 Introduction 2 Robotic end effector in Assembly and Handling 3 Concept and Definition of Collaboration 4 Statement of the academic purpose and methodology 5 Guideline and Methodology for designing the Active Lightweight End-effector (ALE) for collaborative robots 6 Performance demand d4): multiplicity and versatility of end effector 7 A safety monitoring end effector (Adapter) for collaborative operations 8 A practical study of collaborative integration based on collaborative degree 9 Conclusion Appendix

This thesis addresses issues related to the simulation and optimization of the injection molding of short fiber-reinforced plastics (SFRPs). The injection molding process is modeled by a two phase flow problem. The simulation of the two phase flow is accompanied by the solution of the Folgar-Tucker equation (FTE) for the simulation of the moments of fiber orientation densities. The FTE requires the solution of the so called 'closure problem'', i.e. the representation of the 4th order moments in terms of the 2nd order moments. In the absence of fiber-fiber interactions and isotropic initial fiber density, the FTE admits an analytical solution in terms of elliptic integrals. From these elliptic integrals, the closure problem can be solved by a simple numerical inversion. Part of this work derives approximate inverses and analytical inverses for special cases of fiber orientation densities. Furthermore a method is presented to generate rational functions for the computation of arbitrary moments in terms of the 2nd order closure parameters. Another part of this work treats the determination of effective material properties for SFRPs by the use of FFT-based homogenization methods. For these methods a novel discretization scheme, the 'staggered grid'' method, was developed and successfully tested. Furthermore the so called 'composite voxel'' approach was extended to nonlinear elasticity, which improves the approximation of material properties at the interfaces and allows the reduction of the model order by several magnitudes compared to classical approaches. Related the homogenization we investigate optimal experimental designs to robustly determine effective elastic properties of SFRPs with the least number of computer simulations. Finally we deal with the topology optimization of injection molded parts, by extending classical SIMP-based topology optimization with an approximate model for the fiber orientations. Along with the compliance minimization by topology optimization we also present a simple shape optimization method for compensation of part warpage for an black-box production process.:Acknowledgments v Abstract vii Chapter 1. Introduction 1 1.1 Motivation 1 1.2 Nomenclature 3 Chapter 2. Numerical simulation of SFRP injection molding 5 2.1 Introduction 5 2.2 Injection molding technology 5 2.3 Process simulation 6 2.4 Governing equations 8 2.5 Numerical implementation 18 2.6 Numerical examples 25 2.7 Conclusions and outlook 27 Chapter 3. Numerical and analytical methods for the exact closure of the Folgar-Tucker equation 35 3.1 Introduction 35 3.2 The ACG as solution of Jeffery's equation 35 3.3 The exact closure 36 3.4 Carlson-type elliptic integrals 37 3.5 Inversion of R_D-system 40 3.6 Moment tensors of the angular central Gaussian distribution on the n-sphere 49 3.7 Experimental evidence for ACG distribution hypothesis 54 3.8 Conclusions and outlook 60 Chapter 4. Homogenization of SFRP materials 63 4.1 Introduction 63 4.2 Microscopic and macroscopic model of SFRP materials 63 4.3 Effective linear elastic properties 65 4.4 The staggered grid method 68 4.5 Model order reduction by composite voxels 80 4.6 Optimal experimental design for parameter identification 93 Chapter 5. Optimization of parts produced by SFRP injection molding 103 5.1 Topology optimization 103 5.2 Warpage compensation 110 Chapter 6. Conclusions and perspectives 115 Appendix A. Appendix 117 A.1 Evaluation of R_D in Python 117 A.2 Approximate inverse for R_D in Python 117 A.3 Inversion of R_D using Newton's/Halley's method in Python 117 A.4 Inversion of R_D using fixed point method in Python 119 A.5 Moment computation using SymPy 120 A.6 Fiber collision test 122 A.7 OED calculation of the weighting matrix 123 A.8 OED Jacobian of objective and constraints 123 Appendix B. Theses 125 Bibliography 127 / Diese Arbeit befasst sich mit Fragen der Simulation und Optimierung des Spritzgießens von kurzfaserverstärkten Kunststoffen (SFRPs). Der Spritzgussprozess wird durch ein Zweiphasen-Fließproblem modelliert. Die Simulation des Zweiphasenflusses wird von der Lösung der Folgar-Tucker-Gleichung (FTE) zur Simulation der Momente der Faserorientierungsdichten begleitet. Die FTE erfordert die Lösung des sogenannten 'Abschlussproblems'', d. h. die Darstellung der Momente 4. Ordnung in Form der Momente 2. Ordnung. In Abwesenheit von Faser-Faser-Wechselwirkungen und anfänglich isotroper Faserdichte lässt die FTE eine analytische Lösung durch elliptische Integrale zu. Aus diesen elliptischen Integralen kann das Abschlussproblem durch eine einfache numerische Inversion gelöst werden. Ein Teil dieser Arbeit leitet approximative Inverse und analytische Inverse für spezielle Fälle von Faserorientierungsdichten her. Weiterhin wird eine Methode vorgestellt, um rationale Funktionen für die Berechnung beliebiger Momente in Bezug auf die Abschlussparameter 2. Ordnung zu generieren. Ein weiterer Teil dieser Arbeit befasst sich mit der Bestimmung effektiver Materialeigenschaften für SFRPs durch FFT-basierte Homogenisierungsmethoden. Für diese Methoden wurde ein neuartiges Diskretisierungsschema 'staggerd grid'' entwickelt und erfolgreich getestet. Darüber hinaus wurde der sogenannte 'composite voxel''-Ansatz auf die nichtlineare Elastizität ausgedehnt, was die Approximation der Materialeigenschaften an den Grenzflächen verbessert und die Reduzierung der Modellordnung um mehrere Größenordnungen im Vergleich zu klassischen Ansätzen ermöglicht. Im Zusammenhang mit der Homogenisierung untersuchen wir optimale experimentelle Designs, um die effektiven elastischen Eigenschaften von SFRPs mit der geringsten Anzahl von Computersimulationen zuverlässig zu bestimmen. Schließlich beschäftigen wir uns mit der Topologieoptimierung von Spritzgussteilen, indem wir die klassische SIMP-basierte Topologieoptimierung um ein Näherungsmodell für die Faserorientierungen erweitern. Neben der Compliance-Minimierung durch Topologieoptimierung stellen wir eine einfache Formoptimierungsmethode zur Kompensation von Teileverzug für einen Black-Box-Produktionsprozess vor.:Acknowledgments v Abstract vii Chapter 1. Introduction 1 1.1 Motivation 1 1.2 Nomenclature 3 Chapter 2. Numerical simulation of SFRP injection molding 5 2.1 Introduction 5 2.2 Injection molding technology 5 2.3 Process simulation 6 2.4 Governing equations 8 2.5 Numerical implementation 18 2.6 Numerical examples 25 2.7 Conclusions and outlook 27 Chapter 3. Numerical and analytical methods for the exact closure of the Folgar-Tucker equation 35 3.1 Introduction 35 3.2 The ACG as solution of Jeffery's equation 35 3.3 The exact closure 36 3.4 Carlson-type elliptic integrals 37 3.5 Inversion of R_D-system 40 3.6 Moment tensors of the angular central Gaussian distribution on the n-sphere 49 3.7 Experimental evidence for ACG distribution hypothesis 54 3.8 Conclusions and outlook 60 Chapter 4. Homogenization of SFRP materials 63 4.1 Introduction 63 4.2 Microscopic and macroscopic model of SFRP materials 63 4.3 Effective linear elastic properties 65 4.4 The staggered grid method 68 4.5 Model order reduction by composite voxels 80 4.6 Optimal experimental design for parameter identification 93 Chapter 5. Optimization of parts produced by SFRP injection molding 103 5.1 Topology optimization 103 5.2 Warpage compensation 110 Chapter 6. Conclusions and perspectives 115 Appendix A. Appendix 117 A.1 Evaluation of R_D in Python 117 A.2 Approximate inverse for R_D in Python 117 A.3 Inversion of R_D using Newton's/Halley's method in Python 117 A.4 Inversion of R_D using fixed point method in Python 119 A.5 Moment computation using SymPy 120 A.6 Fiber collision test 122 A.7 OED calculation of the weighting matrix 123 A.8 OED Jacobian of objective and constraints 123 Appendix B. Theses 125 Bibliography 127

The work presented in this thesis encompasses the design, development, realization and testing of novel magnetoelectric thin film elements that do not rely on ferromagnets, but are based entirely on magnetoelectric antiferromagnets such as Cr2O3. Thin film spintronic elements, and in particular magnetoelectric transducers, are crucial building blocks of high efficiency data processing schemes that could complement conventional electronic data processing in the future. Recent developments in magnetoelectrics have revealed, that exchange biased systems are ill-suited to electric field induced switching of magnetization due to the strong coupling of their ferromagnetic layer to magnetic fields. Therefore, ferromagnet-free magnetoelectric elements are proposed here in an effort to mitigate the practical problems associated with existing exchange biased magnetoelectric elements. This goal is achieved by establishing an all-electric read-out method for the antiferromagnetic order parameter of thin films, which allows to omit the ferromagnet from conventional exchange biased magnetoelectric elements. The resulting ferromagnet-free magnetoelectric elements show greatly reduced writing thresholds, enabled operation at room temperature and do not require a pulsed magnetic field, all of which is in contrast to state-of-the-art exchange biased magnetoelectric systems. The novel all-electric read-out method of the magnetic field-invariant magnetization of antiferromagnets, so-called spinning-current anomalous Hall magnetometry, can be widely employed in other areas of thin film magnetism. Its high precision and its sensitivity to previously invisible phenomena make it a promising tool for various aspects of thin solid films. Based on this technique, a deep understanding could be generated as to what physical mechanisms drive the antiferromagnetic ordering in thin films of magnetoelectric antiferromagnets. As spinning-current anomalous Hall magnetometry is an integral probe of the magnetic properties in thin films, it offers no intrinsic scale sensitivity. In order to harness its great precision for scale related information, a statistical framework was developed, which links macroscopic measurements with microscopic properties such as the antiferromagnetic domain size.:TABLE OF CONTENTS Abbreviations 9 1 Introduction 11 1.1 Motivation 11 1.2 Objectives 12 1.3 Organization of the thesis 13 2 Background 15 2.1 History of magnetoelectric coupling 15 2.2 Long range magnetic ordering 16 2.2.1 Magnetic order parameter and field susceptibility 17 2.2.2 Magnetic proximity effect 19 2.2.3 Exchange bias 20 2.3 Phenomenology of magnetoelectric coupling 21 2.3.1 The linear magnetoelectric effect 21 2.3.2 Magnetoelectric pressure on the antiferromagnetic order parameter 22 2.3.3 Switching the antiferromagnetic order parameter 23 2.4 Realized magnetoelectric thin film elements 24 2.4.1 BiFeO3/CoFe system 24 2.4.2 Cr2O3/Co/Pt system 25 3 Experimental methods 27 3.1 Development of ferromagnet free magnetoelectric elements 28 3.1.1 The substrate 29 3.1.2 The Cr2O3 bulk and top surface 31 3.1.3 The V2O3 or Pt bottom electrodes 33 3.1.4 Epitaxial relationships 34 3.1.5 The Cr2O3 bottom interface 39 3.1.6 Twinning of Cr2O3 39 3.1.7 Hall crosses and patterning processes 43 3.2 Magnetotransport measurements 44 3.2.1 Hall effects 45 3.2.2 Anomalous Hall effect 46 3.2.3 Magnetoelectric writing 47 3.2.4 All electric read out 49 3.3 The experimental setup 50 3.3.1 Temperature control 50 3.3.2 Magnetic field control 51 4 Spinning-current anomalous Hall magnetometry 53 4.1 Characteristics of the technique 53 4.1.1 Operational principle 53 4.1.2 Advantages 55 4.1.3 Magnetic hysteresis loops and field-invariant magnetization 55 4.1.4 Measurement of field-invariant magnetization 56 4.1.5 Limitations 58 4.2 Application of SCAHM to Cr2O3(0001) thin films 59 4.2.1 Criticality and distribution of the antiferromagnetic phase transition 61 4.2.2 Evaluation of the magnetic proximity effect 64 4.3 SCAHM with thin metallic antiferromagnetic IrMn films 65 4.3.1 [Pt/Co]4/IrMn exchange bias system 65 4.3.2 Isolated antiferromagnetic IrMn thin films 67 5 Magnetoelectric performance 69 5.1 Magnetoelectric field cooling 69 5.2 The gate bias voltage 71 5.3 Isothermal binary magnetoelectric writing in Cr2O3 72 6 Order parameter selection in magnetoelectric antiferromagnets 77 6.1 Uncompensated magnetic moment 77 6.2 Extrinsic causes for broken sublattice equivalence 81 6.3 The V2O3 gate electrode 83 7 Measurement of microscopic properties with an integral probe 87 7.1 Interentity magnetic exchange coupling 87 7.2 Ensemble formalism for the entity size determination 90 7.3 Estimation of the entity sizes 94 7.4 Microscopic confirmation of the ensemble model 97 8 Summary and Outlook 101 8.1 Goal-related achievements 101 8.1.1 All-electric read-out of the AF order parameter 101 8.1.2 Electric field induced writing of the AF order parameter 102 8.2 Further achievements 103 8.2.1 Foreseen impact of SCAHM on thin film magnetism 103 8.2.2 Practical optimization routes of magnetoelectric Cr2O3 systems 104 8.2.3 Theoretical work 105 8.3 Future directions 105 8.3.1 Development of Cr2O3-based magnetoelectric systems 105 8.3.2 Applications of SCAHM 106 References 107 Erklärung 113 Acknowledgements 115 Curriculum Vitae 117 Scientific publications, contributions, patents 119

Die Entwicklung mechanischer Antriebskonzepte für nichtlineare Bewegungsaufgaben stellt bis heute ein komplexes und domänenübergreifendes Fachgebiet des Maschinenbaus dar. Auf dem Gebiet der ebenen Koppelgetriebe gibt es dabei seit vielen Jahren Versuche, die optimale Lösung für eine Aufgabe unter Berücksichtigung kinetischer Kenngrößen zu finden. Die vorliegende Arbeit stellt eine Methodik vor, die sowohl den klassischen Verfahren der Getriebetechnik als auch den Ansätzen der Mechanik zum Ausgleich der Massenwirkungen im Getriebe gerecht wird. Der entwickelte Ansatz des modulbasierten Analyse-Synthese-Parameter-Abgleiches (ASPA) erlaubt erstmals eine domänenübergreifende Simulation komplexer Antriebskonzepte auf Basis einer neuartigen modularen Synthesebibliothek. Diese lässt sich dank umfangreicher Dokumentation und der dargestellten Programmablaufpläne in beliebige Software implementieren. Die exemplarisch im Systemsimulator SimulationX implementierte Bibliothek ermöglicht somit unter anderem die Anwendung der klassischen Drei- und Vierlagensynthese im bewegten oder ruhenden Bezugssystem für Dreh- und Schubgelenkketten. Neben der Ausgabe gerundeter Getriebeabmessungen eröffnet der beschriebene Ansatz somit die Berücksichtigung kinetischer Kenngrößen wie den Pendelschwingungen in spielbehafteten Gelenken oder der Änderung der Trägheitskenngrößen während der Synthese. Weiterführend kann eine multikriterielle Optimierung der noch freien Syntheseparameter erfolgen. / Developing nonlinear transmitting planar coupler linkages represents a domain spanning area in mechanical engineering. In recent years many efforts have been made to determine the optimal planar linkage regarding kinetic characteristics. This thesis introduces a method linking classical synthesis procedures with mechanical approaches for a dynamically balanced mechanism. For the first time, the module based analysis-synthesis-parameter-adjustment (ASPA) allows for a domain spanning simulation of complex drive assemblies based on a novel modular synthesis library. Due to an extensive documentation and detailed program flow charts it is possible to implement the library in arbitrary software environments. The exemplarily implemented library in SimulationX allows to apply the classical three- and four-position synthesis within a steady or moving reference frame of revolute or prismatic joint chains. Further, the modules return rounded link dimensions. By applying this library according to ASPA it is now possible to account for kinetic boundaries such as pendulum oscillations of joints with joint clearance or the change of mass properties during the position synthesis. Thus, a multi-criteria optimization of the remaining free synthesis parameters can be applied.

This thesis addresses the development of materials, technologies and circuits applied for the fabrication of a new class of microelectronic devices that are relying on a three-dimensional shape variation namely shapeable microelectronics. Shapeable microelectronics has a far-reachable future in foreseeable applications that are dealing with arbitrarily shaped geometries, revolutionizing the field of neuronal implants and interfaces, mechanical prosthetics and regenerative medicine in general. Shapeable microelectronics can deterministically interface and stimulate delicate biological tissue mechanically or electrically. Applied in flexible and printable devices shapeable microelectronics can provide novel functionalities with unmatched mechanical and electrical performance. For the purpose of shapeable microelectronics, novel materials based on metallic multilayers, photopatternable organic and metal-organic polymers were synthesized. Achieved polymeric platform, being mechanically adaptable, provides possibility of a gentle automatic attachment and subsequent release of active micro-scale devices. Equipped with integrated electronic the platform provides an interface to the neural tissue, confining neural fibers and, if necessary, guiding the regeneration of the tissue with a minimal impact. The self-assembly capability of the platform enables the high yield manufacture of three-dimensionally shaped devices that are relying on geometry/stress dependent physical effects that are evolving in magnetic materials including magentostriction and shape anisotropy. Developed arrays of giant magnetoimpedance sensors and cuff implants provide a possibility to address physiological processes locally or distantly via magnetic and electric fields that are generated deep inside the organism, providing unique real time health monitoring capabilities. Fabricated on a large scale shapeable magnetosensory systems and nanostructured materials demonstrate outstanding mechanical and electrical performance. The novel, shapeable form of electronics can revolutionize the field of mechanical prosthetics, wearable devices, medical aids and commercial devices by adding novel sensory functionalities, increasing their capabilities, reducing size and power consumption.

Confronted with the global demographic changes and the increasing pressure on modern healthcare system, there has been a surge of developing new technology platforms in the past decades. Droplet microfluidics is a prominent example of such technology platforms, which offers an efficient format for massively parallelized screening of a large number of samples and holds great promise to boost the throughput and reduce the costs of modern biomedical activities. Despite recent achievements, the realization of a compact and generic screening system which is suited for resource-limited settings and point-of-care applications remains elusive. To address the above challenges, the dissertation focuses on the development of a compact multifunctional droplet micro-magnetofluidic system by exploring the advantages of magnetic in-flow detection principles. The methodologies behind a novel technique for biomedical applications, namely, magnetic in-flow cytometry have been put forth, which encompass magnetic indexing schemes, quantitative multiparametric analytics and magnetically-activated sorting. A magnetic indexing scheme is introduced and intrinsic to the magnetofluidic system. Two parameters characteristic of the magnetic signal when detecting magnetically functionalized objects, i.e. signal amplitude and peak width, providing information which is necessary to perform quantitative analysis in the spirit of optical cytometry has been proposed and realized. Magnetically-activated sorting is demonstrated to actively select individual droplets or to purify a population of droplets of interest. Together with the magnetic indexing scheme and multiparametric analytic technique, this functionality synergistically enables controlled synthesis, quality administration and screening of encoded magnetic microcarriers, which is crucial for the practical realization of magnetic suspension arrays technologies. Furthermore, to satisfy the needs of cost-efficient fabrication and high-volume delivery, an approach to fabricate magnetofluidic devices on flexible foils is demonstrated. The resultant device retains high performance of its rigid counterpart and exhibits excellent mechanical properties, which promises long-term stability in practical applications.