Combination of the compact but sterically flexible ferrocene scaffold with intermolecular binding potential and conformational variability of (2-hydroxyethyl)ammonium structural motif was utilised in the construction of solid crystalline materials. Crystallisation in systems containing ferrocenecarboxylic, 2-ferrocenylacetic, 3-ferrocenylpropionic, 3-ferrocenyl- acrylic, 3-ferrocenylacrylic, 3-ferrocenylpropiolic, ferrocene-1,1'-dicarboxylic or ferrocene- sulfonic acid with 2-aminoethanol afforded crystals of the corresponding salts. The resulting crystalline products were characterised with the usual methods (proton nuclear magnetic resonance, infrared spectroscopy, elemental analysis) and their crystal structures were determined by means of single-crystal X-ray diffraction analysis. The crystal structures of the salts mentioned above usually contain rather complicated two dimensional networks of charge-assisted hydrogen bonds. With the aim of studying potentially more simple hydrogen-bonded structures, additional crystallisation experiments were conducted in systems of ferrocenecarboxylic acid and 2-(methylamino)ethanol or 2-(dimethylamino)ethanol. These experiments yielded simple salt of the former amine and adducts of salts of both bases with ferrocenecarboxylic acid in the ratio of 1:1. The...

L’objectif de ce travail de thèse était la préparation et la caractérisation des hétéropolyanions anhydres sur supports oxydes par la stratégie de chimie organométallique de surface. Les acides anhydres H3PMo12O40 et H3PW12O40 ont été préparés sur silice partiellement déshydroxylée. Cette réaction conduit à une interaction ionique par protonation des silanols de surface. La réactivité de ces hétéropolyacides anhydres en présence d’alkylsilanes a été étudiée en milieu homogène et a conduit à la formation d’espèces silylées cationiques [Et2MeSi+]3[HPA3-] et au dégagement d’hydrogène. Cette réactivité a ensuite été appliquée en milieu hétérogène en fonctionnalisant la surface de la silice par des groupements [(≡SiO)SiMe2H] et a conduit à la formation d’une espèce de surface polyoxometalate liée de manière covalente au support. L’introduction de fonction chloroalkylsilane à la surface de la silice [(≡SiO)SiMeCl2] et [(≡SiO)2SiMeCl] a également permis de former des liaisons covalentes Si Support-O-M HPA. Par ailleurs, Par ailleurs, l’activation du méthane a été observée sur tous les solides HPA/SiO2 à travers le dégagement de CO2, H2O, H2. L’activation C-H a lieu sur ces systèmes même à basse température et les données obtenues suggèrent la formation d’une espèce méthoxy de surface par réaction des protons acides avec le méthane / The aim of this work was the preparation and characterization of anhydrous heteropolyanions on oxide supports using surface organometallic chemistry approach. Anhydrous H3PMo12O40 and H3PW12O40 were prepared on partially dehydroxylated silica. This reaction led to an ionic interaction by protonation of surface silanols. The reactivity of these heteropoly compounds with alkylsilanes was studied in homogeneous conditions and led to the formation of cationic silicon species [Et2MeSi+]3[HPA3-] and release of hydrogen. This reactivity was then applied in heterogeneous conditions by introduction of silane groups [(≡SiO)SiMe2H] at the silica surface and led to the formation of a surface polyoxometalate species covalently bonded to the support. The introduction of chloroalkylsilane groups [(≡SiO)SiMeCl2] and [(≡SiO)2SiMeCl] has also enabled the formation of covalent bonds Si Support-O-M HPA. In addition, methane activation was observed on all HPA/SiO2 solids through the releases of CO2, H2O, H2. The C-H activation takes place on these systems even at low temperature and obtained data suggest the formation of a methoxy surface species by reaction of stronf acidic protons with methane

Mass spectrometry has in recent years been established as the standard method for protein identification and characterization in proteomics with excellent intrinsic sensitivity and specificity. Fourier transform ion cyclotron resonance is the mass spectrometric technique that provides the highest resolving power and mass accuracy, increasing the amount of information that can be obtained from complex samples. This thesis concerns how useful information on proteins of interest can be extracted from mass spectrometric data on different levels of protein structure and how to obtain this data experimentally. It was shown that it is possible to analyze complex mixtures of protein tryptic digests by direct infusion electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry and identify abundant proteins by peptide mass fingerprinting. Coupling on-line methods such as liquid chromatography and capillary electrophoresis increased the number of proteins that could be identified in human body fluids. Protein identification was also improved by novel statistical methods utilizing prediction of chromatographic behavior and the non-randomness of enzymatic digestion. To identify proteins by short sequence tags, electron capture dissociation was implemented, improved and finally coupled on-line to liquid chromatography for the first time. The combined techniques can be used to sequence large proteins de novo or to localize and characterize any labile post-translational modification. New computer algorithms for the automated analysis of isotope exchange mass spectra were developed to facilitate the study of protein structural dynamics. The non-covalent interaction between HIV-inhibitory peptides and the oligomerization of amyloid β-peptides were investigated, reporting several new findings with possible relevance for development of anti-HIV drug therapies and understanding of fundamental mechanisms in Alzheimer’s disease.

<p>Degradable polymers have gained an increased attention in the field of biomedical applications over the past decades, for example in tissue engineering. One way of improving the biocompatibility of these polymers is by chemical surface modification, however the risk of degradation during the modification procedure is a limiting factor. In some biomedical applications, for example in nerve guides, a patterned surface is desired to improve the cell attachment and proliferation.</p><p>In this thesis a new non-destructive, single-step, and solvent free method for surface modification of degradable polymers is described. Poly(L-lactide) (PLLA) substrates have been functionalized with one of the following vinyl monomers; N-vinylpyrrolidone (VP), acrylamide (AAm), or maleic anhydride (MAH) grafts. The substrates were subjected to a vapor phase atmosphere constituted of a mixture of a vinyl monomer and a photoinitiator (benzophenone) in a closed chamber at very low pressure and under UV irradiation. Poly(ε-caprolactone) (PCL), poly(lactide-co-glycolide) (PLGA), and poly(trimethylene carbonate) (PTMC) have been surface modified with VP using the same procedure to show the versatility of the method. The wettability of all of the four substrates increased after grafting. The surface compositions were confirmed by ATR-FTIR and XPS. The VP grafted PLLA, PTMC and PLGA substrates have been shown to be good substrates for the normal human cells i.e. keratinocytes and fibroblasts, to adhere and proliferate on. The topography of substrates with well defined nano patterns was preserved during grafting, since the grafted layer is very thin. We have also shown that the method is useful for a simultaneous chemical and topographical modification of substrates by masked vapor phase grafting. The surface topography was determined with SEM and AFM.</p> / <p>Intresset för användningen av nedbrytbara polymerer till biomedicinska applikationer som till exempel vävnads rekonstruktion har ökat avsevärt de senaste decennierna. Ett sätt att öka biokompatibiliteten hos dessa polymerer är genom kemisk ytmodifiering, men risken för nedbrytning under själva modifieringen är en begränsande faktor. I vissa biomedicinska applikationer, till exempel nervguider, är det önskvärt att ha en väldefinierad ytstruktur för att öka vidhäftningen och tillväxten av celler.</p><p>I den här avhandlingen presenteras en ny ickeförstörande, lösningsmedelsfri enstegsprocess för ytmodifiering av nedbrytbara polymerer. Substrat av poly(L-laktid) (PLLA) har ytfunktionaliserats med var och en av följande vinylmonomerer, N-vinylpyrrolidon (VP), akrylamid (AAm) eller maleinsyraanhydrid (MAH). Substraten har exponerats för en gasfasatmosfär av en blandning av en vinylmonomer och en fotoinitiator (bensofenon) i en tillsluten reaktor vid mycket lågt tryck och under UV-strålning. Metodens mångsidighet har även påvisats genom att ytmodifiera substrat av poly(ε-kaprolakton) (PCL), poly(laktid-co-glykolid) (PLGA) och poly(trimetylen karbonat) (PTMC) med VP. Vätbarheten ökade för alla fyra materialen efter ympning med en vinylmonomer. Ytsammansättningen fastställdes med ATR-FTIR och XPS. De VP ympade filmerna av PLLA, PLGA och PTMC visade sig vara bra substrat för mänskliga celler, i detta fall keratinocyter och fibroblaster, att vidhäfta och växa på. Yttopografin hos filmer med väldefinierade nanomönstrade ytor kunde bevaras efter ympning, tack vare att det ympade lagret är så tunt. Gasfas metoden har också visat sig användbar för att simultant ytmodifiera både kemiskt och topografiskt genom maskad gasfasympning. Yttopografin bestämdes med SEM och AFM.</p>

L’immuno-isolation des îlots de Langerhans est proposée comme moyen d’effectuer des transplantations sans prise d’immunosuppresseurs par le patient. Cette immuno-isolation, par l’entremise d’une microcapsule composée d’alginate et de poly-L-lysine (microcapsule APA), protège le greffon d’une éventuelle attaque du système immunitaire du receveur grâce à sa membrane semi-perméable. Cette membrane empêche le système immunitaire du receveur de pénétrer la microcapsule tout en laissant diffuser librement les nutriments, le glucose et l’insuline. Avant l’application de cette technique chez l’humain, quelques défis doivent encore être relevés, dont la biocompatibilité de ce système. La biocompatibilité fait ici référence à la biocompatibilité du biomatériau utilisé pour la fabrication des microcapsules, l’alginate, mais aussi la biocompatibilité des microcapsules reliée à leur stabilité. En effet, il a été remarqué que, lors d’implantation in vivo de microcapsules fabriquées avec de l’alginate non purifiée, ceci induisait un phénomène nommé Réaction de l’Hôte contre la Microcapsule (RHM). De plus, il est connu que la stabilité des microcapsules APA peut influencer leur biocompatibilité puisqu’une microcapsule endommagée ou brisée pourrait laisser s’échapper les cellules du greffon chez le receveur. Nous croyons qu’une compréhension des processus d’initiation de la RHM en fonction de l’efficacité des procédés de purification d’alginate (et donc des quantités de contaminants présents dans l’alginate) ainsi que l’augmentation de la stabilité des microcapsules APA pourront améliorer la biocompatibilité de ce dispositif, ce que tente de démontrer les résultats présentés dans cette thèse. En effet, les résultats obtenus suggèrent que les protéines qui contaminent l’alginate jouent un rôle clé dans l’initiation de la RHM et qu’en diminuant ces quantités de protéines par l’amélioration des procédés de purification d’alginate, on améliore la biocompatibilité de l’alginate. Afin d’augmenter la stabilité des microcapsules APA, nous décrivons une nouvelle technique de fabrication des microcapsules qui implique la présence de liaisons covalentes. Ces nouvelles microcapsules APA réticulées sont très résistantes, n’affectent pas de façon négative la survie des cellules encapsulées et confinent les cellules du greffon à l’intérieur des microcapsules. Cette dernière caractéristique nous permet donc d’augmenter la biocompatibilité des microcapsules APA en protégeant le receveur contre les cellules du greffon. / Islet of Langerhans inmmunoisolation is proposed as a way to avoid the use of immunosuppressive drugs after transplantation. Microcapsules, the immuno-isolating device, are composed of alginate and poly-L-lysine and the protection of the graft is granted by a semi-permeable membrane. This membrane allows small molecules to freely diffuse within the microcapsule, such as nutrients, glucose and insulin while protecting the graft against the host immune system. Biocompatibility is one of the challenges that must be addressed before the successful clinical application of this device. Microcapsules biocompatibility is related, first, to the biocompatibility of alginate, the polymer used to made microcapsules and second, to the in vivo stability of these microcapsules. In facts, it is well know that the use of an unpurified alginate containing many foreign contaminants to make microcapsules induce the host reaction against microcapsule (HRM). Moreover, damaged or broken microcapsules can allow the dissemination of cells from the encapsulated graft, activating the host immune system. We believe that a better understanding of the initiation processes of the HRM in terms of alginate purification efficacy to remove contamination as well as an improve microcapsule stability will increase microcapsules biocompatibility. Results reported in this thesis suggest that foreign proteins found in alginate are playing a key role in the initiation of HRM and that the reduction of these foreign proteins, by the improvement of alginate purification processes, improves microcapsules biocompatibility. In order to increase microcapsules stability, we also described and characterized an innovative type of microcapsules which involve covalent bonds. These covalently cross-linked microcapsules were found to by highly resistant and stable. The novel fabrication process of these microcapsules was not harmful for the encapsulated cell survival and was also found to confine the graft inside the microcapsules. This characteristic enables us to increase microcapsules biocompatibility by the protection of the host from the encapsulated cells.

Les travaux réalisés au cours de cette thèse se décomposent en deux thèmes principaux, eux-même subdivisés enplusieurs projets. D'une part, des travaux ont été menés concernant l'analyse et le développement de fonctionnelles « doubles hybrides ». Une analyse des fonctionnelles « doubles hybrides » à séparation linéaire le long de la connexionadiabatique a été proposée. Une nouvelle fonctionnelle « double hybride » à séparation de portée basée sur uneséparation alternative de l'énergie d'échange et de corrélation, RSDHf, a été développée. D'autre part, des travaux quant au développement de surfaces d'énergie potentielle (SEP) analytiques ont été menés. Un nouveau potentiel analytique a été proposé pour la description de la SEP des systèmes triatomiques. La combinaison de ce potentiel avec un potentiel électrostatique a été utilisé pour le développement de SEP analytiques pour de petits systèmes en interaction faible : H2O···HF, HF2-, Ne···ClF. / Works done during this thesis split into two main themes, themselves subdivided in several projects. On the one hand, works have been led concerning the analysis and the development of double-hybrid functionals. An analysis of linearly-separated double-hybrid functionals along the adiabatic connection has been proposed. A new range-separated double-hybrid functional based on an alternative separation of the exchange-correlation energy, RSDHf, has been developed. On the other hand, works related to the development of analytic potential energy surfaces (PES) has been led. A new analytic potential has been proposed for the description of the PES of triatomic systems. The combinaition of this potential with an electrostatic potential has been used for the development of analytic PES for small systems in weak interaction : H2O···HF, HF2-, Ne···ClF.

Le contrôle du mouvement à l’échelle d’une simple molécule est un sujet actuellement florissant et intensément exploré par des chimistes de tous horizons. Le travail présenté dans ce manuscrit s’inscrit dans ce cadre. La conception ainsi que l’étude en solution et à l’état cristallin de tourniquets moléculaires, espèces composées d’un rotor et d’un stator comportant plusieurs sites d’interaction, y sont décrites.Dans une première partie, la synthèse ainsi que le fonctionnement de tourniquets à charnière de Pt(II) sont décrits. La fermeture et l’ouverture de ces systèmes ainsi que les essais de passage d’une station à une autre y sont étudiés. Les sites d’interactions ont été variés sur le rotor et le stator, pour aboutir à des systèmes variant par la dynamique de leur comportement.Dans une seconde partie, une synthèse optimisée de tourniquets à charnière organique est décrite. Les états ouverts et fermés de ces tourniquets ont été caractérisés.Tous les processus décrits pour les tourniquets ont été étudiés par des études RMN mono- et bi-dimensionnelles en solution.Dans un dernier chapitre, des MM’OFs basés sur un tecton comportant un centre Pt(II) et deux sites coordinant de type pyridine sont exposés. Leur utilisation en tant que tecton organométallique avec divers centres métalliques conduit à la formation de réseaux hétérobimétalliques. Un ligand incluant deux centres Pt(II) et un centre Fe(II) entouré par deux terpyridines est décrit. / The control of intramolecular movements has been a topic of high interest for chemists over two decades. Investigations described in this PhD manuscript aim at the design and study, both in solution and in the crystalline state, of molecular turnstiles. These entities are composed of a rotor and a stator, each of these constituents equipped with recognition sites.In the first part, the synthesis and behavior of Pt(II)-based molecular turnstiles are described. The switching between their open and closed states and the migration process between stations are discussed. The recognition sites on both the stator and rotor have been varied, leading to different behaviors, particularly in terms of their dynamics.In solution, 1- and 2-D NMR have been used for the characterization of the dynamic processes.In the last chapter, the use of a Pt(II)-bispyridyl based tecton for the synthesis of MM’OFs is reported. The use of various metal salts as secondary center has led to the construction of networks varying by their geometry and dimensionality. A ligand including two Pt(II) and one Fe(II) complexed by two terpyridyl units is described.

Degradable polymers have gained an increased attention in the field of biomedical applications over the past decades, for example in tissue engineering. One way of improving the biocompatibility of these polymers is by chemical surface modification, however the risk of degradation during the modification procedure is a limiting factor. In some biomedical applications, for example in nerve guides, a patterned surface is desired to improve the cell attachment and proliferation. In this thesis a new non-destructive, single-step, and solvent free method for surface modification of degradable polymers is described. Poly(L-lactide) (PLLA) substrates have been functionalized with one of the following vinyl monomers; N-vinylpyrrolidone (VP), acrylamide (AAm), or maleic anhydride (MAH) grafts. The substrates were subjected to a vapor phase atmosphere constituted of a mixture of a vinyl monomer and a photoinitiator (benzophenone) in a closed chamber at very low pressure and under UV irradiation. Poly(ε-caprolactone) (PCL), poly(lactide-co-glycolide) (PLGA), and poly(trimethylene carbonate) (PTMC) have been surface modified with VP using the same procedure to show the versatility of the method. The wettability of all of the four substrates increased after grafting. The surface compositions were confirmed by ATR-FTIR and XPS. The VP grafted PLLA, PTMC and PLGA substrates have been shown to be good substrates for the normal human cells i.e. keratinocytes and fibroblasts, to adhere and proliferate on. The topography of substrates with well defined nano patterns was preserved during grafting, since the grafted layer is very thin. We have also shown that the method is useful for a simultaneous chemical and topographical modification of substrates by masked vapor phase grafting. The surface topography was determined with SEM and AFM. / Intresset för användningen av nedbrytbara polymerer till biomedicinska applikationer som till exempel vävnads rekonstruktion har ökat avsevärt de senaste decennierna. Ett sätt att öka biokompatibiliteten hos dessa polymerer är genom kemisk ytmodifiering, men risken för nedbrytning under själva modifieringen är en begränsande faktor. I vissa biomedicinska applikationer, till exempel nervguider, är det önskvärt att ha en väldefinierad ytstruktur för att öka vidhäftningen och tillväxten av celler. I den här avhandlingen presenteras en ny ickeförstörande, lösningsmedelsfri enstegsprocess för ytmodifiering av nedbrytbara polymerer. Substrat av poly(L-laktid) (PLLA) har ytfunktionaliserats med var och en av följande vinylmonomerer, N-vinylpyrrolidon (VP), akrylamid (AAm) eller maleinsyraanhydrid (MAH). Substraten har exponerats för en gasfasatmosfär av en blandning av en vinylmonomer och en fotoinitiator (bensofenon) i en tillsluten reaktor vid mycket lågt tryck och under UV-strålning. Metodens mångsidighet har även påvisats genom att ytmodifiera substrat av poly(ε-kaprolakton) (PCL), poly(laktid-co-glykolid) (PLGA) och poly(trimetylen karbonat) (PTMC) med VP. Vätbarheten ökade för alla fyra materialen efter ympning med en vinylmonomer. Ytsammansättningen fastställdes med ATR-FTIR och XPS. De VP ympade filmerna av PLLA, PLGA och PTMC visade sig vara bra substrat för mänskliga celler, i detta fall keratinocyter och fibroblaster, att vidhäfta och växa på. Yttopografin hos filmer med väldefinierade nanomönstrade ytor kunde bevaras efter ympning, tack vare att det ympade lagret är så tunt. Gasfas metoden har också visat sig användbar för att simultant ytmodifiera både kemiskt och topografiskt genom maskad gasfasympning. Yttopografin bestämdes med SEM och AFM. / QC 20101014

No description available.

Överkonsumtionen av engångsartiklar i fossilbaserad plast är ett av dagens stora miljöproblem. Således finns en efterfrågan på strategier för framställning av biobaserade plaster i allmänhet och härdplaster i synnerhet. Tidigare forskning har visat att vanillin-baserade resin, genom UV-härdning och dynamisk iminkemi, kan användas i framställningen av härdplaster som är termiskt bearbetningsbara, kemiskt återvinningsbara och självläkande. Följaktligen är Digital Light Processing (DLP) 3D-utskrivning en möjlig och flexibel friformframställningsmetod med stor noggrannhet för sådana härdplaster.  Mot denna bakgrund framställdes, i detta projekt, tre olika UV-härdbara, biobaserade monomerer, i form av vitrimerresin, genom en tvåstegsreaktion: metakrylering av vanillin följt av iminbildning med tre olika aminer (etylendiamin, EDA; 2,2′-etylendioxi bisetylamin, EDEA och trimetylolpropan trispolypropylenglykol aminterminerad eter, T-403). De tre olika monomererna analyserades för att identifiera den mest lämpade för friformframställning av härdplast med DLP 3D-printning. Monomeren framställd med EDA kunde inte UV-härdas till en härdplast. De två andra monomererna, å andra sidan, härdades framgångsrikt till härdplaster med god termisk stabilitet (upp till ungefär 300 °C) samtidigt som de var termiskt bearbetningsbara. Vidare visade dessa härdplaster lovande resultat vad gäller självläkning och kemisk återvinningsbarhet. Härdningen av monomeren syntetiserad med EDEA krävde minst tidsåtgång. Utöver detta visade denna härdplast god stabilitet i ett flertal vanliga lösningsmedel samtidigt som den, till följd av dess dynamiska iminbindningar, kemiskt kunde återvinnas i hexylamin. Slutligen visades det hur detta resin framgångsrikt kunde användas i DLP 3D-utskrivning av härdplast. / One of the main causes of the petrochemical depletion is the overconsumption of single-use plastic products. New strategies based on the production of plastics (in particular thermosets) starting from bio-based resources are, therefore, demanded. Previous research has shown how vanillin-based vitrimer resins can be photocured into thermally reprocessable, chemically recyclable and self-healable imine thermosets; and the potential of the light-assisted 3D-printing techniques for the photocuring of resins with great accuracy and flexibility.  In this study, three different photocurable biobased vitrimer resins were synthesized through a two-step procedure involving the methacrylation of vanillin and the Schiff-base reaction with two different diamines (ethylenediamine, EDA; 2,2′-(Ethylenedioxy) bis(ethylamine), EDEA) and a triamine (trimethylolpropane tris[poly(propylene glycol), amine terminated] ether, T-403). The resins were analyzed in order to find the most suitable one for DLP 3D-printing. The resin with EDA, as diamine, could not be successfully UV-cured into a thermoset. The other two thermosets showed good thermal stability, up to about 300 °C, while still being thermally reprocessable. In addition, the thermosets were promising in terms of self-healability and chemical recyclability. The thermoset obtained from the Schiff-base resin synthesized with the diamine EDEA provided the shortest curing time. This resin also displayed good solvent resistance against common solvents and potential chemical recyclability in hexylamine through an imine exchange reaction. As a final step, the possibility to obtain tridimensional thermosets by curing this resin with a DLP 3D-printing was successfully demonstrated.