(in English): The master's thesis deals with the question of how verb conjugation is presented in selected Czech textbooks for Russian-speaking students. It focuses on the way selected teaching materials classify Czech verbs and introduce their conjugation. The verb classification used in textbooks is compared with that in grammar books for native Czech speakers and that in grammar books for foreigners. and with CEFR recommendations for Czech at A1 and A2 levels. Each of the analyzed textbooks presents a system of Czech verbs in their own way. There is no unified approach to the classification of verbs. The systems used in textbooks differ between those in grammar books for native speakers and in those for foreigners. The aim of the work is to reveal similarities and differences in the classification and presentation of verbs in selected textbooks. The analysis of the gaps in the presentation of verb classes in present tense can be useful in the creation of teaching materials.

In the reservoir conditions, a petroleum fluid is defined by its thermodynamic and volumetric properties and by its physicochemical properties. Their behaviors are modeled from experimental data in order to properly simulate the processing of these fluids during the production.   With the advent of new regulations and rigidity that exist at the custom regulations today, research centers have great difficulty in obtaining large amounts of samples. For these reason, although there are several methods to characterize the different components of crude oil, the laboratories are turning increasingly to techniques that requires lower amounts of samples: micro-distillation, gas chromatography (GC).   The micro-distillation is a fast and completely computerized technique made to substitute the standard distillation for analysis of liquid petroleum products. Advantages of the method compared to the standard distillation are the reduction of working time by at least a factor of 4, the small sample volumes required for distillation (few micro liters). [24]   This report is aimed to create a simple model that can predict yield curves of physical distillation, without using the micro-distillation technique. The results obtained through gas chromatography (GC) analysis by laboratory technicians enable the modeling of the fluid behavior. Having identified and treated practically all aspects of micro-distillation through simulations with PRO/II, I found out that, regardless of the setting and the thermodynamic method used, there are always significant differences between simulation results and those of the micro-distillation.   The result shows that it’s still difficult to create a model which can replace micro-distillation and gas chromatography (GC) because of the huge gap between the simulation results and micro-distillation. Furthermore, the dynamics revealed that the micro distillation is not accurate. I had hoped to get additional results by studies the correlations with more samples, but that did not turn out to be the case. Regardless of that, I think that it would be interesting to study more samples and use another simulator to properly represent micro distillation. This could be an interesting topic for further studies. / Under de föhållanden som reservoarens miljö erbjuder, definieras en petroleumvätska av dess termodynamiska och volymetriska egenskaper och av dess fysikalisk-kemiska egenskaper. För att korrekt simulera bearbetningen av dessa vätskor under produktion, deras beteende modelleras från experimentella data Med tillkomsten av nya regler och oflexibilitet som finns på tullbestämmelser vid gränserna idag, har forskningscenter stora svårigheter att få större mängder prover levererade. Av den anledningen, trots att det finns flera metoder för att karakterisera de olika komponenterna av råolja, tvingas laboratorier att vända sig mer och mer till alternativa analysmetoder som kräver mindre provvolymer: mikrodestillation, gaskromatografi, etc.   Mikrodestillation, som är en snabb och helt datoriserad teknik, visar sig kunna ersätta standarddestillation för analys av flytande petroleumprodukter. Fördelar med metoden jämfört med standarddestillering är minskad arbetstidsåtgång med minst en faktor 4. Därtill krävs endast en begränsad provvolym (några mikroliter) i jämförelse med standarddestillation.  [24]   Denna rapport syftar till att skapa en enkel modell som kan förutsäga avkastningskurvan av fysisk destillation, utan att använda mikrodestillationsteknik. De resultat som erhölls genom gaskromatografiska analyser möjliggjorde modelleringen av det vätskebeteendet hos det analyserade provet. Efter att ha identifierat och behandlat praktiskt taget alla viktiga aspekter av mikro destillation genom simuleringar med PRO/II, fann jag att, oberoende av inställningen och den termodynamiska metod som används,  det alltid finns stora skillnader mellan simulering och mikro destillation.   Resultatet visar att det fortfarande är svårt att skapa en modell som kan ersätta mikrodestillering och gaskromatografi på grund av differensen mellan simuleringsresultaten å ena sidan, och resultaten från mikrodestillering å andra sidan. Dessutom visade resultaten att mikrodestillation som analysmetod inte ger tillförlitliga resultat. Min förhoppning var att få ytterligare användbara resultat genom att studerar potentiella korrelationer emellan fler prover, men detta visade sig inte vara fallet. Jag anser att det skulle vara intressant att studera fler prover och använda en annan simulator för att bättre representera mikrodestillation. Detta skulle kunna vara ett intressant ämne för vidare studier.

No description available.

Thesis (M.Com. (Business Management)) -- University of Limpopo, 2022 / The primary objective of the study was to examine the effect of values (biospheric values, altruistic values, egoistic values and openness to change values) on voluntary pro-environmental behaviour of employees of SMMEs.In addition, the study investigated the moderating effect of demographic variables (gender, age and level of education) in the relationship between values and pro-environmental behaviour. The quantitative approach was utilised and the cross-sectional survey method was used to collect data from the respondents that were conveniently sampled. The Cronbach’s alpha was used to measure reliability and the Partial Least Square Structural Equation Modelling (PLS SEM) was utilised to analyse data. The findings of the study indicated that biospheric values has a negative relationship with employees’ voluntary proenvironmental behaviour. Three values (altruistic, egoistic and openness to change values) have significant positive relationships with voluntary pro-environmental behaviour of employees. The moderating effects of gender, age and level of education are insignificant. Recommendations on how to use values to improve the voluntary pro-environmental behaviour of employees of SMMEs are outlined.

The Christian History was a pro-revivalist magazine printed in Boston from 1743-1745 during what is known as the Great Awakening. It contained accounts of revivalism written by pro-revivalist ministers from throughout the American colonies, England and Scotland. These ministers believed that the Holy Spirit was being poured out upon the land in a shower of grace, causing unprecedented numbers of people to convert to Christ. In The Christian History, pro-revivalist ministers expressed their support for the revivals and shared their experiences. Thus the magazine has typically been viewed as religious propaganda advocating a single, polemical viewpoint. However, in spite of its pro-revival stance, The Christian History contains a spectrum of ideas pertaining to theology, religious history and the controversial issues that surfaced during the Awakening. For instance, although revival supporters sought to defend the Awakening as an authentic outpouring of God's grace, they did not all agree on how to handle the revivals. When it came to the "errors of doctrine" and "disorders of practice" that surfaced during the Awakening -- things like Antinomianism, bodily manifestations and itinerancy -- Christian History ministers responded differently. Though they sought to form a more uniform policy regarding these issues and others in a pro-revival ministerial meeting, in the end their opinions and reactions were shaped by their personal experiences with the revivals. In spite of their differing views regarding errors and disorders, Christian History ministers evaluated and contextualized the revivals similarly. In their revival narratives they frequently drew upon the Bible to explain and support their pro-revival stance. Some also used historical precedents as tropes for demonstrating that aspects of revivalism were perhaps unusual, but not thoroughly new. Most, however, sought to legitimize the revivals by describing their positive social qualities. For example, they wrote how tavern-going and neighborly contentions decreased, whereas occasions for religious worship multiplied. These "good fruits" of revivalism, asserted Christian History contributors, showed that the Awakening had changed the "face" of society for the better and was therefore an authentic outpouring of God's grace.

[pt] Bento XVI, em sua obra Jesus de Nazaré: Desde a entrada em Jerusalém até a ressurreição , publicada em 2011, afirmou que a preposição por é a palavra-chave para se entender o mistério de Cristo e o significado do seu seguimento, pois introduz na teologia o conceito de pró-existência. A presente tese tem como finalidade estudar como aparece e que lugar ocupa o conceito de pró-existência na obra cristológica de Joseph Ratzinger. Ao desenvolver o presente estudo em quatro capítulos expositivos, o autor se propõe no primeiro capítulo diversas considerações preliminares. No segundo capítulo, a pesquisa expõe a manifestação de Deus como pró-existente no decurso da história. No terceiro, são apresentados os fundamentos da pró-existência: em Jesus, e, a partir de sua revelação, no mistério trinitário. No último capítulo se desenvolve a pró-existência no sacrifício oferecido por Jesus na cruz. O trajeto proposto fundamenta as afirmações de Jesus de Nazaré . O vocábulo bíblico por introduz na teologia o conceito de pró-existência: a vida de Jesus se caracterizou como uma existência toda voltada para o Pai e vivida para a salvação da humanidade. Da revelação de Jesus Cristo se é conduzido a conhecer a pró-existência intratrinitária, e, ao mesmo tempo, a considerar a pró-existência do homem enquanto pessoa e cristão. O ápice da entrega de Cristo para o Pai e para a humanidade se deu no mistério da cruz. Sendo Cristo o constitutivo do ser-cristão, este, ao responder à oferta salvífica feita por Cristo na cruz, encontrará a si mesmo e a própria salvação. De modo concreto, o ser humano se descobrirá e será salvo, ao reproduzir em si a atitude fundamental que caracterizou a pessoa e o agir de Jesus: vivendo de forma pró-existente sua entrega confiante e obediente ao Pai, e, ao mesmo tempo, o amor solícito ao próximo. / [en] Benedict XVI, in his work Jesus of Nazareth: From the Entrance into Jerusalem to the Resurrection , published in 2011, stated that the preposition for is the key word to understand the mystery of Christ and the meaning of following him, as it introduces the concept of pro-existence into theology. This present thesis aims to study how it appears and what place the concept of pro-existence occupies in the Christological work of Joseph Ratzinger. Structured in four explanatory chapters, this research proposes several preliminary considerations in the First Chapter. In the Second one, the survey exposes the manifestation of God as pro-existing throughout history. In the Third Chapter, the foundations of pro-existence are summarized on Jesus and his revelation, in the Trinitarian mystery. The Last Chapter presents the pro-existence in the sacrifice offered by Jesus on the cross. The suggested path underlies the claims of Jesus of Nazareth . The biblical term for leads the concept of pro-existence into theology: Jesus life was distinguished as an existence all engaged towards the Father and lived for the salvation of mankind. From the revelation of Jesus Christ, one is led to know the intra-Trinitarian pro-existence, and, at the same time, to consider the pro-existence of man as a person and a Christian. The height of Christ s surrender to the Father and to humanity took place in the mystery of the cross. Since Christ is the constituent element of the Christian being, one will find oneself and one s own salvation in responding to Christ s saving offer on the cross. In a concrete way, the human being will discover oneself and be saved by reproducing in a fundamental attitude that characterized the person and behavior of Jesus: living in a pro-existing way his confident and obedient surrender to the Father, and, at the same time, a solicitous love towards others.

In recent years, the technical progress of Unmanned Aerial Vehicles (UAV) has increased rapidly. This has made it economically possible for tasks where one earlier needed helicopters or airplanes. By equipping UAVs with high-quality cameras, the utility has expanded. With detailed photos from a UAV together with digital photogrammetry, special software can be used to create point clouds, 3D-models, elevation models and ortomosaics over smaller geographic areas.  Due to the easy access and that the use of UAVs has increased among private users, the Swedish transport agency has set up rules that determine how UAVs should be used. In these regulations, UAVs are separated into different groups from A1 to A3 based on the weight of the aircraft. The regulations make it illegal to fly a UAV heavier than 250 g over people who are not informed about the flight. Since there are several industries where it could be interesting to fly over people, DJI has manufactured a UAV-model called DJI Mini 2. This UAV weighs 249 g and can therefore be flown over people. In this project, two different flights have been carried out. One with the DJI Mini 2 weighing 249 g and one with the DJI Mavic 2 Pro weighing just under 1 kg. During the flight, overlapping pictures were captured and orthomosaic and elevation models were created from those. The purpose of the project was to investigate if the same accuracy can be achieved with a mini-UAV as with a larger UAV. The study also investigated whether the models were accurate enough to use as a ground model along roads and railroads.  In the Dronelink software, two different flight routs were created over Örsholmens IP in the east­ern part of Karlstad, Sweden. Dronelink created the flightpath based on the UAVs different specifications and the overlap between images that were acquired. A geodetic control network was created using GNSS-technology. Five points were measured twice with 45 minutes in between and calculated in SBG GEO. The next day, a surveying total station was established centrally between the points in the geodetic control network. Thereafter 19 ground control points were measured, and 398 ground points distributed in 20 different control profiles. After the points were measured, the flights were carried out. A total of two flights by each UAV model were made the same day. Then the flight with the best results were used for further processing.  The photos taken were processed in Agisoft Metashape. In the software, point clouds, elevation models and orthomosaic were created. The elevation model was then compared to the measured control profiles. The orthomosaic was used to compare the ground control points.  The results showed that the elevation model created with Mavic 2 Pro was within the SIS tolerance on all different types of surfaces to be used for modelling along roads and railways. The elevation model from the DJI Mini 2 was withing the tolerance on grass and asphalt but not on gravel sur­face. The mean deviation on gravel was -1,37 cm outside the tolerance. The planar comparison showed that both models were withing the tolerance to achieve HMK level 3 standard. / Den tekniska utvecklingen av obemannade flygfarkoster har de senaste åren utvecklats i snabb takt. Flygfarkosterna som ofta benämns UAV (Unmanned Aerial Vehicle) har gjort det möjligt att till en låg kostnad genomföra uppdrag som tidigare krävt helikopter eller flygplan. Genom att utrusta en UAV med en högkvalitativ kamera så ökar dess användningsområde. Med hjälp av detaljerade digi­tala bilder tagna med UAV, och digital fotogrammetri i specialprogramvaror kan punktmoln, 3D-modeller, höjdmodeller och ortomosaik över mindre geografiska områden framställas.  På grund av att UAV-användningen ökat snabbt så har Transportstyrelsen tagit fram ett regelverk för hur en UAV får användas. I detta regelverk så delas olika UAV-modeller in i grupper från A1 till A3 baserat på vikten. Regelverket gör att en UAV som är tyngre än 250 g inte får flygas över männi­skor som inte är informerade om att flygningen pågår.  Eftersom det i flera branscher kan vara intressant att flyga över platser där människor rör sig fritt så har DJI tillverkat en UAV-modell som heter DJI Mini 2. Denna UAV väger 249 g och får därför flygas över människor. I detta projekt har två olika flygningar gjorts med DJI Mini 2 som väger 249 g och med Mavic 2 Pro som väger knappt 1 kg. Under flygningen togs överlappande bilder och höjdmodeller och ortomosaik skapades från dessa. Syftet med arbetet är att undersöka om lika hög noggrannhet kan uppnås med en mini-UAV som med en större modell. Studien undersökte även om modellerna uppnår kraven i SIS-TS 21144:2016 och HMK för att få användas till att skapa markmodell längs väg och järnväg.  I programvaran Dronelink så skapades två flygrutter över Örsholmens IP i den östra delen av Karl­stad. Dronelink skapade rutterna baserat på de olika UAV-specifikationerna och bildöverlappet som valdes för flygningarna. På platsen skapades ett nytt stomnät med hjälp av GNSS-teknik. Fem punk­ter mättes in två gånger med 45 minuters mellanrum och beräknades i SBG GEO. Dagen efter eta­blerades en totalstation centralt mellan punkterna mot stomnätet. Därefter mättes 19 markstöd in och 398 punkter fördelat i 20 olika kontrollprofiler. Efter att punkterna var inmätta genomfördes flygningarna. Totalt gjordes två flygningar med de olika UAV-modellerna på samma dag. Därefter valdes de flygningar som visade bäst resultat för vidare bearbetning.  Bilderna som togs bearbetades i programvaran Agisoft Metashape och punktmoln, höjdmodell och ortomosaik genererades. Höjdmodellen användes sedan för att jämföras mot de inmätta kontrollprofilerna. Ortomosaiken jämfördes med de inmätta kontrollpunkterna.   Resultatet visade att höjdmodellen som skapades med Mavic 2 Pro var inom SIS-TS 21144:2016 toleranserna på samtliga underlag för att få användas för modellskapande på väg och järnväg. Höjdmodellen som skapades med DJI Mini 2 var inom toleransen på gräs och asfalt men inte på grusunderlag. Medelavvikelsen på grus var -1,37 cm utanför toleransen. Vid jämförelsen i plan vi­sade resultatet att båda modellerna var inom HMKs toleranser för att uppnå HMK-standardnivå 3.

The Swedish power grid is facing challenging times to cope with the transition to green renewable energy and to ensure safe and sustainable transportation through the country. The need to upkeep with maintenance and reconstruction as well as construction of new power lines requires planning and overhead power lines require extensive areas of safe zones below the power lines. In the planning stage of these streaks there are multiple areas of interest that require careful consideration and therefore evaluations of the area of interest are necessary.This bachelor thesis aims to develop a prototype for an automated tool in the initial suite selection of possible streaks for new power lines. The project is done in collaboration with NEKTAB who want to investigate the potential of developing their own tool for standardized evaluations of suite selections and to reduce workload. By utilizing multicriteria analysis (MCA) and geographical information systems (GIS), two software packages are used and compared, i.e. FME and ArcGIS Pro. Prototypes are developed from a reference project Eon is working on alongside NEKTAB. A sophisticated weighting system to evaluate areas of interest against each other is designed using the weighing method SWING and MCA-method weighted linear combination (WLC). The two prototypes from the software are compared through grid comparisons and by utilizing a predefined classification. The results show limited differences between the software though greater disparity when it comes to stability and the capability to manage larger amounts of data.The conclusions of the development and comparisons of the software and results show that both are capable in managing large amounts of data and accomplish the task, though the stability and functions are better within FME thus being more suitable for further optimization. Further development is required as the prototypes still do not manage all the requested features. Further developments are also required with the weighing system to meet expectations on a larger scale with more local and national areas of interest. / Det svenska elnätet står inför en enorm utmaning för att klara omställningen till grön energi och för att säkert transportera elen genom landet. Många kraftledningar är i behov av underhåll, ombyggnad och nybyggnation och när de gäller nybyggnation kräver luftledningar breda ledningsgator som tar stora arealer i anspråk. Det finns dock ett stort antal intressen som riskerar hamna i konflikt med etablering av kraftledningar och därför krävs en undersökning av aktuella markområden.Detta examensarbete syftar till att ta fram prototyper på automatiserade verktyg för ett första urval av möjliga etableringsområden. Arbetet utförs tillsammans med företaget NEKTAB som vill undersöka förutsättningarna för att utveckla ett eget verktyg för att standardisera urvalet och korta ned arbetstiden, detta genomförs med multikriterieanalys (MKA) och geografiska informationssystem (GIS). I arbetet med att ta fram automatiska modeller har två programvaror jämförts, ArcGIS Pro och FME, utifrån ett referensprojekt med Eon. För att uppnå detta har en viktningsmodell tagits fram som implementeras med MKA metoden weitghted linear combination (WLC). De två prototyperna jämförs genom celljämförelser utifrån en definierad klassning, framtagen utifrån referensprojektet och resultatet av jämförelsen visar på små skillnader mellan FME och ArcGIS Pro, men större skillnader i programmens stabilitet och hur de hanterar större datamängder.Slutsatser som dras är att både FME och ArcGIS Pro är användbara kandidater för ett generaliserat och utvecklat verktyg men att stabiliteten är bättre hos FME och därför mer lämplig att använda. Fortsatt arbete kommer krävas i den fortsatta utvecklingen av prototyperna tillsammans med en vidareutveckling av viktningen för att säkerställa att denna fungerar på större skala, med fler lokala och nationella intresseområden.

No description available.

Studiens syfte var att undersöka hur upplever Pro-gamers inom FIFA stressorer och vilka copingstrategier som används för att hantera dem. Studiens fokus var på att få fram upplevelser av stressorer hos deltagarna och om de upplever just dessa faktorer, vad de använder sig av för copingstrategier för att hantera dessa situationer. Det deltog totalt åtta stycken intervjupersoner där alla var män i åldrarna 17-34 år (M=22,5) där dessa intervjupersoner befann sig i inklusionskriterie för att medverka i studien där alla var pro-gamers inom FIFA. Studien har utgått ifrån en kvalitativ forskningsmetod och använt sig av semistrukturerade intervjuer för samla in data och intervjuguide som grund har utgått utifrån ett teoretiskt ramverk, McGrath (1970) fyra-stegs stressprocess modellen. I studiens resultat framkommer det totalt två stycken huvudteman, det första huvudtemat som nämns är upplevda stressorer, som totalt har fem stycken underliggande teman. Dessa är krav på sig själv, krav från samhället, krav från föreningen, krav från fans och krav från vänner och familj. Det andra huvudtemat som framkommer i studien är copingstrategier som används för att hantera upplevda stressorer som har totalt fyra stycken underliggande teman. Dessa är stöd från föreningen, stöd från familj, stöd från vänner och copingstrategier i sitt FIFA-utövande. Resultatdelen i studien har olika svarsteman men det var bland annat att intervjupersoner upplever stressorer i sitt FIFA spelande där de bland annat upplever krav på sig själv, samhället, föreningen, fans samt från sina vänner och familj. I resultatdelen framkom det även vilka copingstrategier som intervjupersoner använder sig av för att hantera dessa krav som kan bidra till att deltagarna upplever stressorer. Det som framkom var till exempel att de upplevde att det fanns bra stöd från föreningen och använde sig av den möjligheten, från sin familj och vänner men att de också använde sig av individuella copingstrategier såsom fysisk aktivitet eller att gå ut och promenera. Studiens resultat kan i framtiden vara användbar till framtida forskning för esportföreningar och liknande organisationer. Detta genom att studiens resultat kan forskas vidare kring bland annat vilka copingstrategier som kan användas om man i sitt FIFA-utövande upplever stressorer. / The purpose of the study was to investigate how Pro-gamers within FIFA experience stressors and which coping strategies are used to deal with them. The focus of the study was to bring out experiences of stressors in the participants to write if they experience and lead to any stress and performance anxiety when they are in a competitive context and if they experience these factors what they use for coping strategies to deal with these situations. A total of eight interviewees participated where all were men aged 17-34 years (M=22.5, SD=?) where these interviewees were in the inclusion criteria to participate in the studies where all were pro-gamers within FIFA. The study was based on a qualitative research method and used semi-structured interviews to collect data and an interview guide based on a theoretical framework, McGrath's (1970) four-step stress process model. In the results of the study, a total of two main themes emerge, the first main theme mentioned is perceived stressors, which in total has five underlying themes. These are demands on oneself, demands of society demands of the association, demands of fans and demands of friends and family. The second main theme that emerges in the study is coping strategies used to manage perceived stressors, that have a total of four underlying themes. These are support from the association, support from family, support from friends and coping strategies in their FIFA practice. The results part in the studies has different answers, but it was, among other things, that interviewees experience stressors in their FIFA playing, where they experience demands on themselves, society, the association, fans and from their friends and family, among other things. In the results section, it was also revealed which strategies the interviewees use to deal with these demands, which can contribute to the participants experiencing stressors. What emerged was, for example, that they felt that there was good support from the association and used the opportunity from their family and friends that they also used individual strategies such as physical activity or going out for a walk. The results of the study may in the future be useful to future research for esports associations and similar organizations. This is because the study's results can be further researched on, among other things, which coping strategies can be used if you experience stressors in your FIFA practice.