<p>The Philippines is a country with a lot to offer within the tourism sector. With its 7107 islands, it offers diversity in culture and a wide range of tourism destinations. However, tourism development in the Philippines has not been as successful as its neighbouring countries. In order to develop the country as an attractive destination, collaboration is needed. The cooperation of different stakeholders as well as the importance of trust and reciprocity is vital for an effective collaboration.</p><p>Destination development within the tourism industry is seen as a collaboration or cooperation between different stakeholders who in part have something to gain in joining the collaboration. The relationship among the stakeholders may be based on previous interactions. In addition, concerning their respective involvement within the collaboration, theories argue that stakeholders do not necessarily exercise equal participation. With the use of the WOW Philippines campaign as an example of collaboration involving several stakeholders, the theories within collaboration shall be examined. At the same time, the theories will aid in researching the factors that may or may not be responsible for the advancements of thecampaign.</p><p>The purpose of this thesis is to analyze the different theories within collaboration with the WOW Philippines campaign as an example of a collaborative endeavour. This thesis is addressed to students within the discipline of tourism development for future studies.</p><p>The researcher has utilized the hypothetico-deductive method which entails the examination of three theories within collaboration. Three hypotheses formulated from these theories will be either confirmed or dismissed in the end of the study.</p><p>With the help of the hypotheses, the researcher has concluded that aspects of trust and reciprocity within collaboration are vital in its success. Although in this case, it refers to a country’s perception of trust and reciprocity. The problem domain i.e. destination development aiming on increasing inbound tourism cannot be said to be the main reason for the achievements of the campaign. It is a contributing factor, as well as, the involvement of the stakeholders. The theories are acceptable in different levels with regard to the WOW Philippines campaign i.e. they cannot be either taken as individual reasons for its advancements or proclaimed as false. These theories are intertwined which means their relevance to each other is important in the case of tourism development in the Philippines.<strong><em></em></strong></p>

This study examines the acceptance, usage and motivation of virtual reality users from a perspective of longitude to achieve a deeper understanding regarding the usage of technology as well as to which extent it aligns with the technology acceptance model UTAUT 2 and the seven variables known as determinants. The established determinants for technology adoption were evaluated through eight qualitative interviews. This study confirms the validity of UTAUT 2 but also contributes with suggestions for additional factors such as wow, hype, reality and social output as well as future usage. The suggested addition of the factors wow and hype generated the most data with tendencies to extend into a general technology context. Reality is another significant quality that is distinguishing for virtual reality and other mixed realities. Very much like other information technologies the virtual reality experience depends on content where aspects such as quality and the available range influences the will to adopt the technology. Since different technologies consist of a unique combination of qualities and possibilities this study suggests that there may be advantages to adjust or extend the adoption model depending on the technology that is to be examined. / Denna studie utforskar acceptans, användning och motivation hos användare av virtuell verklighet (VR) med ett longitudinellt fokus för att få en djupare förståelse kring hur väl dagens teknikanvändning stämmer överens med teknikadaptionsmodellen UTAUT 2 och dess sju avgörande faktorer även kallade determinanter. Genom åtta kvalitativa intervjuer utvärderas de befintliga determinanterna för tenikadapation. Studien styrker validiteten i UTAUT 2 men bidrar med förslag till ytterligare betydande faktorer som wow, hajp, verklighet, socialt influerande, samt framtid. De föreslagna faktorerna wow och hajp genererade mest data men de tenderar att sträcka sig över ett allmänt teknologisammanhang. Verklighet är en annan avgörande faktor som är utmärkande för VR och andra blandade verkligheter (mixed realities - MR). VR likt andra informations- och kommunikationsteknologier (IKT) är för upplevelsen beroende av innehåll där beståndsdelar som kvalitet och utbud påverkar viljan att ta till sig av teknologin. Då olika teknologier består av en unik kombination av egenskaper och möjligheter föreslår denna studie att det finns fördelar i att utöka eller anpassa adaptionsmodellen olika beroende på den teknologi man ämnar att undersöka.

Sistemas de produção in vitro de embriões mamíferos muitas vezes requerem que o cultivo embrionário seja realizado de forma individualizada. Entretanto, os resultados obtidos com o cultivo in vitro (CIV) individual são inconstantes e, por vezes, inferiores ao CIV em grupo. Entre os sistemas que requerem o CIV individual, a técnica de handmade cloning (HMC) se destaca por produzir embriões sem zona pelúcida que não podem ser cultivados agrupados em protocolos convencionais de CIV. O objetivo deste experimento foi determinar as taxas de desenvolvimento in vitro e in vivo de embriões bovinos clonados pela técnica de HMC e submetidos a três diferentes sistemas de CIV em micropoços (Well of the well – WOW), sendo um industrial, confeccionado em polidimetilsiloxano (PDMS), que visou à padronização da configuração do sistema de CIV. Após 11 replicações, de 3.876 complexos cumuli-oócito bovinos maturados in vitro, 3.437 (88,6%) oócitos apresentaram a extrusão do 1º corpúsculo polar. Após a digestão da zona pelúcida, 2.992 estruturas foram bisseccionadas manualmente, com a produção de 2.288 hemi-citoplastos. Reconstruiram-se 1.011 embriões pela adesão de dois hemi-citoplastos a uma célula somática (célula-tronco mesenquimal bovina de uma fêmea adulta da raça Nelore), dos quais 751 (74,2%) embriões fusionaram após eletrofusão, sendo 715 ativados quimicamente. Os embriões clonados (n=705) foram então alocados aleatoriamente em três grupos experimentais para o CIV: Grupo 1 (G1) – micropoço modificado (WOW-modificado, FELTRIN et al., 2006a); Grupo 2 (G2) – micropoço convencional (WOW-convencional , VATJA et al., 2000); e Grupo 3 (G3) – micropoço – PDMS (WOW-PDMS) . Como grupo controle (FIV, Grupo 4, G4), 594 oócitos foram colocados em maturação, fecundação e cultivo in vitro, em paralelo aos grupos clonados. Os resultados das taxas de clivagem no Dia 2, de blastocisto no Dia 7 e de prenhez no Dia 30 de desenvolvimento foram analisados pelo teste do χ2 com nível de significância de 5%. Não houve diferença significativa quanto à taxa de clivagem nos diferentes grupos. Entretanto, a taxa de blastocisto (BL) no G1 (99/239; 41,4%) foi significativamente superior à observada no G2 (72/232; 31,0%) e no G3 (68/234; 29,1%), sendo estas últimas semelhantes entre si. A taxa de BL do grupo controle (315/594; 53,0%) foi superior aos três grupos experimentais. Finalmente, o desenvolvimento in vivo até o Dia 30 de prenhez não diferiu entre os grupos G1 (7/15; 46,7%), G2 (7/13; 53,9%) e G3 (6/16; 50,0%). O sistema em micropoço modificado promoveu melhores condições de CIV a embriões clonados por HMC, traduzido por maiores taxas de BL, não se refletindo, entretanto, em diferenças no desenvolvimento in vivo subseqüente à transferência para fêmeas receptoras. / In vitro production systems for mammalian embryos quite often require embryos to be cultured individually. However, results obtained after individual embryo in vitro culture (IVC) are frequently inconsistent and inferior to IVC in groups. The Handmade Cloning (HMC) procedure is among the systems that require individual IVC, since zona-free embryos cannot be grouped for culture by standard IVC protocols. The aim of this study was to evaluate the in vitro and in vivo development of bovine embryos cloned by HMC, after the IVC in three distinct microwell arrangements, including an industrial chip, manufactured in polydimethylsiloxane (PDMS), which aimed to standardize the pattern of the IVC system. After 11 replications, 3,437 (88.6%) oocytes were selected based on the extrusion of the first polar body, out of 3,876 in vitro-matured bovine cumuli-oocyte complexes. Following zona pellucida digestion, 2,992 structures were manually bisected, generating 2,288 hemi-cytoplasts. A total of 1,011 embryos were reconstructed by the adhesion of two hemi-cytoplasts to a somatic cell (bovine mesenchymal stem cells from an adult Nelore female), with 751 fusing (74.2%) following electrofusion, and 715 being chemically activated. Cloned embryos (n=705) were then randomly allocated to one of three IVC experimental groups: Group 1 (G1) – modified microwells (FELTRIN et al., 2006a); Group 2 (G2) – conventional microwells (VATJA et al., 2000); and Group 3 (G3) – microwells in PDMS. As control group (IVF, Group 4, G4), 594 oocytes were in vitro-matured, fertilized and cultured in parallel to the cloned groups. Cleavage, blastocyst and pregnancy rates evaluated on Days 2, 7 and 30 of development were analyzed by the χ2 test, for a significance level of 5%. No differences in cleavage rates were observed between groups. However, blastocyst rates in G1 (99/239; 41.4%) were significantly higher than in G2 (72/232; 31.0%) and in G3 (68/234; 29.1%), which did not differ between one another. Blastocyst rates in the IVF control group (315/594; 53.0%) were in turn higher than in all cloned experimental groups. Finally, in vivo development to Day 30 of pregnancy was not different between G1 (7/15; 46.7%), G2 (7/13; 53.9%) and G3 (6/16; 50.0%). In summary, the modified microwell system promoted superior development to the blastocyst stage than both the conventional and the DMPS-based microwell systems, with no impact on the subsequent in vivo development after transfer to female recipients.

Studiens syfte är att undersöka sju F-3 lärares inställning till pedagogiskt drama som metod i SO-undervisningen. Studien präglas av det teoretiska perspektivet pragmatismen. Som undersökningsmetod används semistrukturerade intervjuer. Resultatet visar att vissa lärare har en positiv inställning till drama. Möjligheter som lyftes fram med metoden innebär ett lustfyllt lärande, en variationsrik undervisning, en alternativ bedömningsmetod och metodens kommunikativa möjligheter. Resultatet visar också att vissa lärare har en avslappnad inställning till pedagogiskt drama då drama ses som en naturlig del i undervisningen. Resultatet visar att vissa lärare känner sig osäkra vid användandet av pedagogiskt drama då de upplever att de har bristande kompetens inom metoden. Dessutom visar resultatet att vissa lärare har en negativ inställning till pedagogiskt drama och att tidsbrist, bristande kunskaper och huvudfokus på mätbara mål nämndes som hinder vid användandet av metoden. Sammantaget visar resultatet att lärarna var ambivalenta, det vill säga att de hade en positiv inställning till dramas möjligheter för lärandet samtidigt som de ser många hinder vid användandet av metoden.

Design philosophies in MMOs seem to have seen a shift in recent years. What used to be designs for social dependencies and challenging content seems to have become designs for social independence and casual play. This has not gone by unnoticed by communities of players that have gradually increased in size, hoping to find regression in design philosophies for their favorite games. This study combines the social component of Yee’s (2006) model for motivations for online play with Bradner’s (2001) concept of social affordances, and quantitative surveys with qualitative interviews in order to examine how the social player experience in World of Warcraft has changed in relation to changes made to the game. Some of the findings are that the incentives and necessity for socializing with strangers in the game has generally diminished as a consequence of changes made in the game that focus on practical efficiency. External factors that seems to have played a role in these results are age, technological contexts and life contexts of the respondents.

Sistemas de produção in vitro de embriões mamíferos muitas vezes requerem que o cultivo embrionário seja realizado de forma individualizada. Entretanto, os resultados obtidos com o cultivo in vitro (CIV) individual são inconstantes e, por vezes, inferiores ao CIV em grupo. Entre os sistemas que requerem o CIV individual, a técnica de handmade cloning (HMC) se destaca por produzir embriões sem zona pelúcida que não podem ser cultivados agrupados em protocolos convencionais de CIV. O objetivo deste experimento foi determinar as taxas de desenvolvimento in vitro e in vivo de embriões bovinos clonados pela técnica de HMC e submetidos a três diferentes sistemas de CIV em micropoços (Well of the well – WOW), sendo um industrial, confeccionado em polidimetilsiloxano (PDMS), que visou à padronização da configuração do sistema de CIV. Após 11 replicações, de 3.876 complexos cumuli-oócito bovinos maturados in vitro, 3.437 (88,6%) oócitos apresentaram a extrusão do 1º corpúsculo polar. Após a digestão da zona pelúcida, 2.992 estruturas foram bisseccionadas manualmente, com a produção de 2.288 hemi-citoplastos. Reconstruiram-se 1.011 embriões pela adesão de dois hemi-citoplastos a uma célula somática (célula-tronco mesenquimal bovina de uma fêmea adulta da raça Nelore), dos quais 751 (74,2%) embriões fusionaram após eletrofusão, sendo 715 ativados quimicamente. Os embriões clonados (n=705) foram então alocados aleatoriamente em três grupos experimentais para o CIV: Grupo 1 (G1) – micropoço modificado (WOW-modificado, FELTRIN et al., 2006a); Grupo 2 (G2) – micropoço convencional (WOW-convencional , VATJA et al., 2000); e Grupo 3 (G3) – micropoço – PDMS (WOW-PDMS) . Como grupo controle (FIV, Grupo 4, G4), 594 oócitos foram colocados em maturação, fecundação e cultivo in vitro, em paralelo aos grupos clonados. Os resultados das taxas de clivagem no Dia 2, de blastocisto no Dia 7 e de prenhez no Dia 30 de desenvolvimento foram analisados pelo teste do χ2 com nível de significância de 5%. Não houve diferença significativa quanto à taxa de clivagem nos diferentes grupos. Entretanto, a taxa de blastocisto (BL) no G1 (99/239; 41,4%) foi significativamente superior à observada no G2 (72/232; 31,0%) e no G3 (68/234; 29,1%), sendo estas últimas semelhantes entre si. A taxa de BL do grupo controle (315/594; 53,0%) foi superior aos três grupos experimentais. Finalmente, o desenvolvimento in vivo até o Dia 30 de prenhez não diferiu entre os grupos G1 (7/15; 46,7%), G2 (7/13; 53,9%) e G3 (6/16; 50,0%). O sistema em micropoço modificado promoveu melhores condições de CIV a embriões clonados por HMC, traduzido por maiores taxas de BL, não se refletindo, entretanto, em diferenças no desenvolvimento in vivo subseqüente à transferência para fêmeas receptoras. / In vitro production systems for mammalian embryos quite often require embryos to be cultured individually. However, results obtained after individual embryo in vitro culture (IVC) are frequently inconsistent and inferior to IVC in groups. The Handmade Cloning (HMC) procedure is among the systems that require individual IVC, since zona-free embryos cannot be grouped for culture by standard IVC protocols. The aim of this study was to evaluate the in vitro and in vivo development of bovine embryos cloned by HMC, after the IVC in three distinct microwell arrangements, including an industrial chip, manufactured in polydimethylsiloxane (PDMS), which aimed to standardize the pattern of the IVC system. After 11 replications, 3,437 (88.6%) oocytes were selected based on the extrusion of the first polar body, out of 3,876 in vitro-matured bovine cumuli-oocyte complexes. Following zona pellucida digestion, 2,992 structures were manually bisected, generating 2,288 hemi-cytoplasts. A total of 1,011 embryos were reconstructed by the adhesion of two hemi-cytoplasts to a somatic cell (bovine mesenchymal stem cells from an adult Nelore female), with 751 fusing (74.2%) following electrofusion, and 715 being chemically activated. Cloned embryos (n=705) were then randomly allocated to one of three IVC experimental groups: Group 1 (G1) – modified microwells (FELTRIN et al., 2006a); Group 2 (G2) – conventional microwells (VATJA et al., 2000); and Group 3 (G3) – microwells in PDMS. As control group (IVF, Group 4, G4), 594 oocytes were in vitro-matured, fertilized and cultured in parallel to the cloned groups. Cleavage, blastocyst and pregnancy rates evaluated on Days 2, 7 and 30 of development were analyzed by the χ2 test, for a significance level of 5%. No differences in cleavage rates were observed between groups. However, blastocyst rates in G1 (99/239; 41.4%) were significantly higher than in G2 (72/232; 31.0%) and in G3 (68/234; 29.1%), which did not differ between one another. Blastocyst rates in the IVF control group (315/594; 53.0%) were in turn higher than in all cloned experimental groups. Finally, in vivo development to Day 30 of pregnancy was not different between G1 (7/15; 46.7%), G2 (7/13; 53.9%) and G3 (6/16; 50.0%). In summary, the modified microwell system promoted superior development to the blastocyst stage than both the conventional and the DMPS-based microwell systems, with no impact on the subsequent in vivo development after transfer to female recipients.

Sistemas de produção in vitro de embriões mamíferos muitas vezes requerem que o cultivo embrionário seja realizado de forma individualizada. Entretanto, os resultados obtidos com o cultivo in vitro (CIV) individual são inconstantes e, por vezes, inferiores ao CIV em grupo. Entre os sistemas que requerem o CIV individual, a técnica de handmade cloning (HMC) se destaca por produzir embriões sem zona pelúcida que não podem ser cultivados agrupados em protocolos convencionais de CIV. O objetivo deste experimento foi determinar as taxas de desenvolvimento in vitro e in vivo de embriões bovinos clonados pela técnica de HMC e submetidos a três diferentes sistemas de CIV em micropoços (Well of the well – WOW), sendo um industrial, confeccionado em polidimetilsiloxano (PDMS), que visou à padronização da configuração do sistema de CIV. Após 11 replicações, de 3.876 complexos cumuli-oócito bovinos maturados in vitro, 3.437 (88,6%) oócitos apresentaram a extrusão do 1º corpúsculo polar. Após a digestão da zona pelúcida, 2.992 estruturas foram bisseccionadas manualmente, com a produção de 2.288 hemi-citoplastos. Reconstruiram-se 1.011 embriões pela adesão de dois hemi-citoplastos a uma célula somática (célula-tronco mesenquimal bovina de uma fêmea adulta da raça Nelore), dos quais 751 (74,2%) embriões fusionaram após eletrofusão, sendo 715 ativados quimicamente. Os embriões clonados (n=705) foram então alocados aleatoriamente em três grupos experimentais para o CIV: Grupo 1 (G1) – micropoço modificado (WOW-modificado, FELTRIN et al., 2006a); Grupo 2 (G2) – micropoço convencional (WOW-convencional , VATJA et al., 2000); e Grupo 3 (G3) – micropoço – PDMS (WOW-PDMS) . Como grupo controle (FIV, Grupo 4, G4), 594 oócitos foram colocados em maturação, fecundação e cultivo in vitro, em paralelo aos grupos clonados. Os resultados das taxas de clivagem no Dia 2, de blastocisto no Dia 7 e de prenhez no Dia 30 de desenvolvimento foram analisados pelo teste do χ2 com nível de significância de 5%. Não houve diferença significativa quanto à taxa de clivagem nos diferentes grupos. Entretanto, a taxa de blastocisto (BL) no G1 (99/239; 41,4%) foi significativamente superior à observada no G2 (72/232; 31,0%) e no G3 (68/234; 29,1%), sendo estas últimas semelhantes entre si. A taxa de BL do grupo controle (315/594; 53,0%) foi superior aos três grupos experimentais. Finalmente, o desenvolvimento in vivo até o Dia 30 de prenhez não diferiu entre os grupos G1 (7/15; 46,7%), G2 (7/13; 53,9%) e G3 (6/16; 50,0%). O sistema em micropoço modificado promoveu melhores condições de CIV a embriões clonados por HMC, traduzido por maiores taxas de BL, não se refletindo, entretanto, em diferenças no desenvolvimento in vivo subseqüente à transferência para fêmeas receptoras. / In vitro production systems for mammalian embryos quite often require embryos to be cultured individually. However, results obtained after individual embryo in vitro culture (IVC) are frequently inconsistent and inferior to IVC in groups. The Handmade Cloning (HMC) procedure is among the systems that require individual IVC, since zona-free embryos cannot be grouped for culture by standard IVC protocols. The aim of this study was to evaluate the in vitro and in vivo development of bovine embryos cloned by HMC, after the IVC in three distinct microwell arrangements, including an industrial chip, manufactured in polydimethylsiloxane (PDMS), which aimed to standardize the pattern of the IVC system. After 11 replications, 3,437 (88.6%) oocytes were selected based on the extrusion of the first polar body, out of 3,876 in vitro-matured bovine cumuli-oocyte complexes. Following zona pellucida digestion, 2,992 structures were manually bisected, generating 2,288 hemi-cytoplasts. A total of 1,011 embryos were reconstructed by the adhesion of two hemi-cytoplasts to a somatic cell (bovine mesenchymal stem cells from an adult Nelore female), with 751 fusing (74.2%) following electrofusion, and 715 being chemically activated. Cloned embryos (n=705) were then randomly allocated to one of three IVC experimental groups: Group 1 (G1) – modified microwells (FELTRIN et al., 2006a); Group 2 (G2) – conventional microwells (VATJA et al., 2000); and Group 3 (G3) – microwells in PDMS. As control group (IVF, Group 4, G4), 594 oocytes were in vitro-matured, fertilized and cultured in parallel to the cloned groups. Cleavage, blastocyst and pregnancy rates evaluated on Days 2, 7 and 30 of development were analyzed by the χ2 test, for a significance level of 5%. No differences in cleavage rates were observed between groups. However, blastocyst rates in G1 (99/239; 41.4%) were significantly higher than in G2 (72/232; 31.0%) and in G3 (68/234; 29.1%), which did not differ between one another. Blastocyst rates in the IVF control group (315/594; 53.0%) were in turn higher than in all cloned experimental groups. Finally, in vivo development to Day 30 of pregnancy was not different between G1 (7/15; 46.7%), G2 (7/13; 53.9%) and G3 (6/16; 50.0%). In summary, the modified microwell system promoted superior development to the blastocyst stage than both the conventional and the DMPS-based microwell systems, with no impact on the subsequent in vivo development after transfer to female recipients.

Le Pow-wow de Kanasatake a vu le jour en 1991, après l’évènement marquant de la Crise d’Oka. À la suite de ce conflit, l’objectif initial consistait en une tentative de réconciliation et le maintien d’une bonne entente entre les membres de la communauté autochtone et les non-membres, appelés « allochtones », résidant sur le terrain voisin de leur territoire dans la municipalité d’Oka. L’objectif de la recherche est de savoir en quoi un événement de pow-wow comme celui de Kanesatake et les performances de danse qui y sont présentées peuvent mener à la guérison chez les artistes autochtones qui y participent. Pour y parvenir, je me suis entretenu avec des artistes pratiquant la danse traditionnelle, également participants au Pow-wow de 2018 et 2019, afin de connaître leur cheminement personnel et leurs perceptions en lien avec leur propre spiritualité, ainsi que les facteurs extérieurs et historiques ayant pu influencer leurs pratiques artistiques. Au fil des entrevues, la notion de guérison psychique, physique et collective est ressortie dans plusieurs réponses données par les participants. Nous verrons aussi plus en détail les liens unissant les tenues traditionnelles, les danses et les rythmes musicaux. Nous ferons aussi référence à l’événement de la « Rencontre internationale d’art performance autochtone » (RIAPA) s’inscrivant davantage dans une contemporanéité pour dénoter une certaine continuité entre ces deux événements. / Kanasatake's Pow-wow was born in 1991, following the landmark event of the "Oka Crisis". As a result of this conflict, the initial objective was an attempt at reconciliation and the maintenance of good understanding between members of the Aboriginal community and the non-members, also known as "allochtones" residing on land adjacent to their territory in the municipality of Oka. The purpose of this master thesis is to understand how a pow-wow event like Kanesatake's and the dance performances presented there can be a healing factor for Aboriginal artists. To achieve this, we spoke with traditional dancers, participants in the 2018 and 2019 Pow-wow, to learn about their personal journeys and perceptions of their own spirituality, as well as the external and historical factors that may have influenced their artistic practices. Over the course of the interviews, the notion of psychic, physical and collective healing was reiterated in several responses given by participants. We will also see in more detail the links surrounding traditional outfits, dances and musical rhythms. We will also refer to the “International Meeting of Aboriginal Performance Art” event (RIAPA), which is more in a contemporaneity to indicate a certain continuity between these two events.

Made available in DSpace on 2014-12-17T15:48:05Z (GMT). No. of bitstreams: 1 MarceloBB_DISSERT.pdf: 3279178 bytes, checksum: a9382860941b949e031aeb7781e74e59 (MD5) Previous issue date: 2013-02-20 / Neste trabalho, apresentamos uma ferramenta cujo intuito ? auxiliar n?o-programadores, jogadores de videogame, na cria??o de extens?es na forma de Add-ons para World of Warcraft, o jogo online. Nele, o usu?rio pode criar extens?es customizando completamente sua interface, de forma a reinventar a sua experi?ncia de jogo e melhorar sua jogabilidade. A cria??o de extens?es para aplicativos e jogos surgiu da crescente necessidade de fornecer aos usu?rios mecanismos eficientes de Programa??o por Usu?rio Final, permitindo que os mesmos preenchessem suas necessidades singulares atrav?s da cria??o, customiza??o e especifica??o de extens?es em software. Em World of Warcraft mais especificamente, os Add-ons exploram um tipo de extens?o na qual os jogadores passam a programar sua pr?pria interface de usu?rio ou a fazer uso de interfaces criadas por outros usu?rios. No entanto, realizar a programa??o dessas extens?es - os Add-ons - n?o ? uma tarefa f?cil. Dentro deste contexto, desenvolvemos a ferramenta EUPAT for WoW (do ingl?s, End-User Programming Assistance Tool for World of Warcraft) que oferece assist?ncia ? cria??o de Add-ons. Al?m disso, investigamos como usu?rios jogadores com e sem conhecimento de programa??o s?o beneficiados. Os resultados desta pesquisa permitiram refletir sobre as estrat?gias de assist?ncia de programa??o por usu?rio final no contexto de jogos

Studien behandlar vilka interaktioner en användare behöver tillämpa för att den ska kunna finna eller skapa ett förtroende inom en guild i spelet World of Warcraft. Det övergripande syftet är att se om dessa interaktioner tillämpas på olika sätt beroende på vilken guild en användare är medlem i. Studien har främst utgått ifrån tre guilder och ett antal WoW-användares egna perspektiv, erfarenheter och tankar där undersökningarna har byggts på kvalitativa metoder. De kvalitativa metoderna inkluderade enkäter, scenario, observation och semi- strukturerade intervjuer. Analysen har till stor del utgått ifrån teorierna socialt kapital teorin och flow-teorin. Studien har även granskat hur WoW’s design och funktioner kan påverka en användares interaktioner både i och utanför spelet. / This study will show different interactions that a user needs to adjust in order to find and create trust within a guild in the game World of Warcraft. The aim of this study is to see if these interactions are used in different ways depending on which guild a user is a member in. The study is based on three different guilds and a few WoW-users perspectives, experiences and thoughts. The main methods in this study is based on qualitative methods that includes surveys, scenarios, observation and semi-structured interviews. The analysis has been based on two theories, social capital theory and the flow theory. This study has also examined how the design and features of WoW can affect a user's interactions, both in and outside the game.