No description available.

The main goal of this dissertation is to present some results on minimal hypersurfaces in the Euclidean space related to the stability operator. Initially, we will present the demonstrations of the formulas of first and second variations of area and also the demonstration of the Simons inequality. These results (which are basic results of the theory) will be used later. Next we will present the proof of the do Carmo-Peng s theorem showing that a complete stable minimal hypersurface immersed in the Euclidean space with finite L2 norm of the second fundamental form is a hyperplane. We will include in this dissertation a similar result with the L3 norm of the second fundamental form. This last result was proved by Li-Wei in the case where the hypersurface has dimension 3, but we note that proof applies to 3≤n≤7. We will conclude by presenting some results on non-stable minimal hypersurfaces in R^3 due to Fischer-Colbrie and Lopez-Ros. In particular, we will show that the catenoid and Enneper s surface are the only minimal complete orientable surfaces with index equal to one. / O objetivo principal desta dissertação é apresentar alguns resultados importantes sobre hipersuperfícies mínimas no espaço Euclidiano relacionados com o operador de estabilidade. Inicialmente, apresentaremos as demonstrações das fórmulas da primeira e da segunda variações da área bem como a demonstração da desigualdade de Simons. Estes resultados, que são básicos da teoria, serão usados posteriormente. Em seguida, apresentaremos a demonstração do teorema de do Carmo-Peng, o qual assegura que uma hipersuperfície mínima completa estável imersa no espaço Euclidiano com a norma L2 da segunda forma fundamental finita é um hiperplano. Incluiremos na dissertação um resultado análogo com a norma L3 da segunda forma fundamental. Este último resultado foi provado por Li-Wei no caso em que a hipersuperfície tem dimensão 3, mas notamos que a demonstração se aplica para 3≤n≤7. Concluiremos apresentando alguns resultados sobre hipersuperfícies mínimas não estáveis no R^3 obtido por Fischer-Colbrie e López-Ros. Em particular, mostraremos que o catenóide e a superfície de Enneper são as únicas superfícies mínimas completas e orientadas com índice igual a um.

In this work we prove two theorems that characterize the hypersurfaces in the unitary sphere of dimension n+1. The first result, obtained by H. Alencar and M. do Carmo, classifies hypersurfaces with constant mean curvature in the sphere. This result was published in April 1994 in Proceedings of The American Mathematical Society, volume 120, number 4 with the title Hypersurfaces with Constant Mean Curvature. The second result was obtained by Li Haizhong in the article Hypersurfaces with Constant Scalar Curvature in Space Forms, published in 1996 in the journal Mathematisch Annalen, volume 305. The theorem of Li Haizhong characterizes hypersurfaces with constant scalar curvature in the sphere. We prove the theorem of Li Haizhong using the results obtained by H. Alencar and M. do Carmo. / Conselho Nacional de Desenvolvimento Científico e Tecnológico / Nesta dissertação apresentamos dois teoremas que caracterizam as hipersuperfícies na esfera unitária de dimensão n+1. O primeiro resultado, obtido por H. Alencar e M. do Carmo, classifica as hipersuperfícies com curvatura média constante na esfera. Este resultado foi publicado em abril de 1994 no Proceedings of The American Mathematical Society, volume 120, número 4 com o título Hypersurfaces With Constant Mean Curvature.O segundo resultado provado nesta dissertação foi obtido por Li Haizhong no artigo Hypersurfaces With Constant Scalar Curvature in Spaces Forms, publicado em 1996 no Mathematische Annalen, volume 305. O Teorema de Li Haizhong caracteriza as hipersuperfícies com curvatura escalar constante na esfera. Demonstraremos o Teorema de Li Haizhong utilizando os resultados obtidos por H. Alencar e M. do Carmo.

The goal of this dissertation is to present a R. Reilly's demonstration of the theorem of Alexandrov . The theorem states that The only compact hypersurfaces, conected, of constant mean curvature, immersed in Euclidean space are spheres. The theorem of Alexandrov was proved by A. D. Alexandrov in the article Uniqueness Theorems for Surfaces in the Large V, published in 1958 by Vestnik Leningrad University, volume 13, number 19, pages 5 to 8. In his demonstration, Alexandrov used the famous Principle of tangency, introduced by him in that article. In the year 1962, M. Obata shown in Certain Conditions for a Riemannian Manifold to be isometric With the Sphere, published by the Journal of Mathematical Society of Japan, volume 14, pages 333 to 340, that a Riemannian Manifold M, compact, connected and without boundary, is isometric to a sphere, since the Ricci curvature of M satisfies certain lower bound. This theorem solves the problem of finding manifolds that reach equality in the estimate of Lichnerowicz for the first eigenvalue. In 1977, R. Reilly, in the article Applications of the Hessian operator in a Riemannian Manifold, published in Indianna University Mathematical Journal, volume 23, pages 459 to 452, showed a generalization of the Obata theorem for compact manifolds with boundary. As an example of the technique developed in this demonstration, he presents a new demonstration of the theorem of Alexandrov. This demonstration, as well as the techniques involved are the object of study of this work. / Conselho Nacional de Desenvolvimento Científico e Tecnológico / O objetivo desta dissertação é apresentar uma demonstração de R. Reilly para o Teorema de Alexandrov. O teorema estabelece que As únicas hipersuperfícies compactas, conexas, de curvatura média constante, mergulhadas no espaço Euclidiano são as esferas. O teorema de Alexandrov foi provado por A. D. Alexandrov no artigo Uniqueness Theorems for Surfaces in the Large V, publicado em 1958 pela Vestnik Leningrad University, volume 13, número 19, páginas 5 a 8. Em sua demonstração, Alexandrov usou o famoso Princípio de Tangência, introduzido por ele no citado artigo. No ano de 1962, M. Obata demonstrou em Certain Conditions for a Riemannian Manifold to be Isometric With a Sphere, publicado pelo Journal of Mathematical Society of Japan, volume 14, páginas 333 a 340, que uma variedade Riemanniana M, compacta, conexa e sem bordo, é isométrica a uma esfera, desde que a curvatura de Ricci de M satisfaça determinada limitação inferior. Este teorema resolve o problema de encontrar as variedades que atingem a igualdade na estimativa de Lichnerowicz para o primeiro autovalor. Em 1977, R. Reilly, no artigo Applications of the Hessian Operator in a Riemannian Manifold, publicado no Indianna University Mathematical Journal, volume 23, páginas 459 a 452, demonstrou uma generalização do Teorema de Obata para variedades compactas com bordo. Como exemplo da técnica desenvolvida nesta demonstração, ele apresenta uma nova demonstração do Teorema de Alexandrov. Esta demonstração, bem como as técnicas envolvidas, são o objeto de estudo deste trabalho.

EVANGELISTA, I. S. Compact almost Ricci soliton, critical metrics of the total scalar curvature functional and p-fundamental tone estimates. 2017. 75 f. Tese (Doutorado em Matemática) – Centro de Ciências, Universidade Federal do Ceará, Fortaleza, 2017. / Submitted by Andrea Dantas (pgmat@mat.ufc.br) on 2017-07-10T12:41:32Z No. of bitstreams: 1 2017_tese_isevangelista.pdf: 618771 bytes, checksum: 7e4bb8d9fd8825ef347e309171075037 (MD5) / Approved for entry into archive by Rocilda Sales (rocilda@ufc.br) on 2017-07-10T14:06:18Z (GMT) No. of bitstreams: 1 2017_tese_isevangelista.pdf: 618771 bytes, checksum: 7e4bb8d9fd8825ef347e309171075037 (MD5) / Made available in DSpace on 2017-07-10T14:06:18Z (GMT). No. of bitstreams: 1 2017_tese_isevangelista.pdf: 618771 bytes, checksum: 7e4bb8d9fd8825ef347e309171075037 (MD5) Previous issue date: 2017-07-04 / The present thesis is divided in three different parts. The aim of the first part is to prove that a compact almost Ricci soliton with null Cotton tensor is isometric to a standard sphere provided one of the following conditions associated to the Schouten tensor holds: the second symmetric function is constant and positive; two consecutive symmetric functions are non null multiple or some symmetric function is constant and the quoted tensor is positive. The aim of the second part is to study the critical metrics of the total scalar curvature funcional on compact manifolds with constant scalar curvature and unit volume, for simplicity, CPE metrics. It has been conjectured that every CPE metric must be Einstein. We prove that the Conjecture is true for CPE metrics under a suitable integral condition and we also prove that it suffices the metric to be conformal to an Einstein metric. In the third part we estimate the p-fundamental tone of submanifolds in a Cartan-Hadamard manifold. First we obtain lower bounds for the p-fundamental tone of geodesic balls and submanifolds with bounded mean curvature. Moreover, we provide the p-fundamental tone estimates of minimal submanifolds with certain conditions on the norm of the second fundamental form. Finally, we study transversely oriented codimension one C 2-foliations of open subsets Ω of Riemannian manifolds M and obtain lower bounds estimates for the infimum of the mean curvature of the leaves in terms of the p-fundamental tone of Ω. / A presente tese está dividida em três partes diferentes. O objetivo da primeira parte é provar que um quase soliton de Ricci compacto com tensor de Cotton nulo é isométrico a uma esfera canônica desde que uma das seguintes condições associadas ao tensor de Schouten seja válida: a segunda função simétrica é constante e positiva; duas funções simétricas consecutivas são múltiplas, não nulas, ou alguma função simétrica é constante e o tensor de Schouten é positivo. O objetivo da segunda parte é estudar as métricas críticas do funcional curvatura escalar total em variedades compactas com curvatura escalar constante e volume unitário, por simplicidade, métricas CPE. Foi conjecturado que toda métrica CPE deve ser Einstein. Prova-se que a conjectura é verdadeira para as métricas CPE sob uma condição integral adequada e também se prova que é suficiente que a métrica seja conforme a uma métrica Einstein. Na terceira parte, estima-se o p-tom fundamental de subvariedades em uma variedade tipo Cartan-Hadamard. Primeiramente, obtém-se estimativas por baixo para o p-tom fundamental de bolas geodésicas e em subvariedades com curvatura média limitada. Além disso, obtém-se estimativas do p-tom fundamental de subvariedades mínimas com certas condições sobre a norma da segunda forma fundamental. Por fim, estudam-se folheações de classe C 2 transversalmente orientadas de codimensão 1 de subconjuntos abertos Ω de variedades riemannianas M e obtêm-se estimativas por baixo para o ínfimo da curvatura média das folhas em termos do p-tom fundamental de Ω.

The primary aim of this research was to investigate the bending behaviour of helically wound steel cables of various types (i.e. normal spiral strands, sheathed spiral strands and locked coil cables) in the presence of friction and to propose more efficient computational models for their analysis under combined tension and bending. The proposed model fully takes into account interwire contact forces both in the radial direction (point contact between wires in different layers) and hoop direction (line contact within the wires in the same layer). Extensive theoretical parametric studies have been undertaken on a variety of cable constructions covering a wide range of geometrical and material parameters. Explicit formulations have been developed for the smooth transition of the bending stiffness from no-slip to full slip regimes, as a function of cable curvature. Based on these formulations, it is now possible to calculate the relative displacements of the wires, as well as the tensile, bending and hoop stresses in the individual wires of the cable. Furthermore, bending stiffness of the cable is shown to decrease by a factor of 2 to 16, depending upon the friction coefficient between wires and the type of cable construction. Wherever possible, the theoretical results have been compared with experimental results from the available literature and are found in very good agreement with them. A simple method for the determination of the bending stiffness of large diameter multi-layered cable has been developed. The simplified method is further shown to provide estimates of the bending stiffness which are very close to those calculated by the original theory, allowing hand calculations for an easier use in industry. The proposed formulations have been extended to cater for the effects of external hydrostatic pressure on sheathed spiral strands in deep water applications. These forces are shown to have a great influence on the pattern of interwire contact forces and hence the interlayer slippage between the wires in the strand. Numerical results have been obtained and analysed for three different 127 mm diameter strands with lay angles of 12°, 18° and 24° respectively, experiencing a wide range of external hydrostatic pressures of 0 to 2,000 metres. The significant increase in normal contact force between wires is shown to suppress the slippage of wires in the cable. However, the no-slip and full slip values of the effective bending stiffness of the cable is shown to be independent of the level of hydrostatic pressure. A theoretical model is also proposed for estimating wire kinematics, pattern of interwire slippage, contact forces as well as the flexural rigidity of locked coil cables with outer layers made of shaped wires. In order to validate this model, numerical results are reported for two different locked coil cables. It is shown that the shaped wires in the outer layers of locked coil cables play an important role in the distribution of contact forces, slip initiation and cable unwinding.

Les espèces végétales, et en particulier les espèces d'arbres, forment un cadre de choix pour un processus de reconnaissance automatique basé sur l'analyse d'images. Les critères permettant de les identifier sont en effet le plus souvent des éléments morphologiques visuels, bien décrits et référencés par la botanique, qui laissent à penser qu'une reconnaissance par la forme est envisageable. Les feuilles constituent dans ce contexte les organes végétaux discriminants les plus faciles à appréhender, et sont de ce fait les plus communément employés pour ce problème qui connaît actuellement un véritable engouement. L'identification automatique pose toutefois un certain nombre de problèmes complexes, que ce soit dans le traitement des images ou dans la difficulté même de la classification en espèces, qui en font une application de pointe en reconnaissance de formes.Cette thèse place le problème de l'identification des espèces d'arbres à partir d'images de leurs feuilles dans le contexte d'une application pour smartphones destinée au grand public. Les images sur lesquelles nous travaillons sont donc potentiellement complexes et leur acquisition peu supervisée. Nous proposons alors des méthodes d'analyse d'images dédiées, permettant la segmentation et l'interprétation des feuilles d'arbres, en se basant sur une modélisation originale de leurs formes, et sur des approches basées modèles déformables. L'introduction de connaissances a priori sur la forme des objets améliore ainsi de façon significative la qualité et la robustesse de l'information extraite de l'image. Le traitement se déroulant sur l'appareil, nous avons développé ces algorithmes en prenant en compte les contraintes matérielles liées à leur utilisation.Nous introduisons également une description spécifique des formes des feuilles, inspirée par les caractéristiques déterminantes recensées dans les ouvrages botaniques. Ces différents descripteurs fournissent des informations de haut niveau qui sont fusionnées en fin de processus pour identifier les espèces, tout en permettant une interprétation sémantique intéressante dans le cadre de l'interaction avec un utilisateur néophyte. Les performances obtenues en termes de classification, sur près de 100 espèces d'arbres, se situent par ailleurs au niveau de l'état de l'art dans le domaine, et démontrent une robustesse particulière sur les images prises en environnement naturel. Enfin, nous avons intégré l'implémentation de notre système de reconnaissance dans l'application Folia pour iPhone, qui constitue une validation de nos approches et méthodes dans un cadre réel. / Plant species, and especially tree species, constitute a well adapted target for an automatic recognition process based on image analysis. The criteria that make their identification possible are indeed often morphological visual elements, which are well described and referenced by botany. This leads to think that a recognition through shape is worth considering. Leaves stand out in this context as the most accessible discriminative plant organs, and are subsequently the most often used for this problem recently receiving a particular attention. Automatic identification however gives rise to a fair amount of complex problems, linked with the processing of images, or in the difficult nature of the species classification itself, which make it an advanced application for pattern recognition.This thesis considers the problem of tree species identification from leaf images within the framework of a smartphone application intended for a non-specialist audience. The images on which we expect to work are then potentially very complex scenes and their acquisition rather unsupervised. We consequently propose dedicated methods for image analysis, in order to segment and interpret tree leaves, using an original shape modelling and deformable templates. The introduction on prior knowledge on the shape of objects enhances significatively the quality and the robustness of the information we extract from the image. All processing being carried out on the mobile device, we developed those algorithms with concern towards the material constraints of their exploitation. We also introduce a very specific description of leaf shapes, inspired by the determining characteristics listed in botanical references. These different descriptors constitute independent sources of high-level information that are fused at the end of the process to identify species, while providing the user with a possible semantic interpretation. The classification performance demonstrated over approximately 100 tree species are competitive with state-of-the-art methods of the domain, and show a particular robustness to difficult natural background images. Finally, we integrated the implementation of our recognition system into the \textbf{Folia} application for iPhone, which constitutes a validation of our approaches and methods in a real-world use.

Made available in DSpace on 2015-05-15T11:46:04Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 816279 bytes, checksum: 28c5081e37dbd539abb463a0ed89b87c (MD5) Previous issue date: 2012-07-27 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / In this paper we studied surfaces with constant mean curvature and surfaces with constant Gaussian curvature in the Sol space which are invariant under the action of two one-parameter subgroups of isometries of the ambient space. Furthermore, we classify the surfaces that satisfy a relationship of type k1 = mk2, where k1 and k2 are the principal curvatures of the surface and m ∈ R. / O presente trabalho aborda um estudo das superfícies com curvatura média constante e das superfícies com curvatura Gaussiana constante no espaço Sol que são invariantes sob a ação de dois grupos a 1-parâmetro de isometrias do espaço ambiente. Além disso, classificamos as superfícies que satisfazem uma relação do tipo k1 = mk2, onde k1 e k2 são as curvaturas principais da superfície e m ∈ R.

CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior / Conselho Nacional de Desenvolvimento CientÃfico e TecnolÃgico / FundaÃÃo de Amparo à Pesquisa do Estado do Amazonas / Esta tese està composta de quatro partes distintas. Na primeira parte, vamos dar uma nova caracterizaÃÃo da esfera euclidiana como a Ãnica variedade Riemanniana compacta com curvatura escalar constante e admitindo um campo de vetores conforme nÃo trivial que à tambÃm Ricci conforme. Na segunda parte, provaremos algumas propriedades dos quase sÃlitons de Ricci, as quais permitem estabelecer condiÃÃes de rigidez desses objetos, bem como caracterizar as estruturas de quase sÃlitons de Ricci gradiente na esfera euclidiana. ImersÃes isomÃtricas tambÃm serÃo consideradas; classificaremos os quase sÃlitons de Ricci imersos em formas espaciais, atravÃs de uma condiÃÃo algÃbrica sobre a funÃÃo sÃliton. AlÃm disso, vamos caracterizar, atravÃs de uma condiÃÃo sobre o operador de umbilicidade, as hipersuperfÃcies n-dimensionais de uma forma espacial, com curvatura mÃdia constante, tendo duas curvaturas principais distintas e com multiplicidades p e n - p. Na terceira parte, provaremos um resultado de rigidez e algumas fÃrmulas integrais para uma mÃtrica m-quasi-Einstein generalizada compacta. Na Ãltima parte, vamos apresentar uma relaÃÃo entre a curvatura gaussiana e o Ãngulo de contato de superfÃcies imersas na esfera euclidiana tridimensional,a qual permite concluir que a superfÃcie à plana, se o Ãngulo de contato for constante. AlÃm disso, deduziremos que o toro de Clifford à a Ãnica superfÃcie compacta com curvatura mÃdia constante tendo tal propriedade. / This thesis is composed of four distinct parts. In the first part, we shall give a new characterization of the Euclidean sphere as the only compact Riemannian manifold with constant scalar curvature carrying a conformal vector eld non-trivial which is also Ricci conformal. In the second part, we shall prove some properties of almost Ricci solitons, which allow us to establish conditions for rigidity of these objects, as well as characterize the structures of gradient almost Ricci soliton in Euclidean sphere. Isometric immersions also will be considered, we shall classify almost Ricci solitons immersed in space forms, through algebraic condition on soliton function. Furthermore, we characterize under a condition of the umbilicity operator, n-dimensional hypersurfaces in a space form with constant mean curvature, admitting two distinct principal curvatures with multiplicities p and n - p. In the third part, we prove a result of rigidity and some integral formulae for a compact generalized m-quasi-Einstein metric. In the last part, we present a relation between the Gaussian curvature and the contact angle of surfaces immersed in Euclidean three-dimensional sphere, which allows us to conclude that such a surface is at provided its contact angle is constant. Moreover, we deduce that Clifford tori are the unique compact surfaces with constant mean curvature having such property.

No description available.