Os minerais do grupo do pirocloro (A2B2X6Y1) apresentam grande interesse econômico, principalmente como fonte de nióbio e tântalo, metais que possuem importantes aplicações tecnológicas como a fabricação de aço e a confecção de componentes eletrônicos. Apesar de seu interesse científico e econômico, a maioria das ocorrências brasileiras de minerais do grupo do pirocloro está apenas parcialmente caracterizada ou não dispõe de nenhum estudo mineralógico. Adicionalmente, o atual sistema de classificação dos minerais do grupo do pirocloro, apesar de aprovado pela IMA, não segue as regras gerais de nomenclatura de minerais da própria IMA. Na posição A, não há diferenciação na ocupação por Ca e por Na, e se um ou mais cátions diferentes de Na ou Ca compuserem mais de 20 % total de átomos na posição A, então a espécie é nomeada pelo átomo mais abundante em A (exceto Na e Ca). Por outro lado, a espécie fluornatromicrolita foi aprovada com base na predominância de Na na posição A. Com relação à ocupação da posição B, a divisão entre os grupos não é feita com uma classificação tripartite: as espécies com Nb + Ta >2Ti e Nb > Ta são consideradas como do subgrupo do pirocloro; se Nb + Ta > 2Ti e Ta ≥ Nb, o mineral irá pertencer ao subgrupo da microlita; e se 2Ti ≥ Nb + Ta, o mineral irá pertencer ao subgrupo da betafita. Espécies isoestruturais com outros cátions predominantes na posição B não são incluídas no grupo do pirocloro (por exemplo, romeíta com Sb dominante). Os ânions não são levados em consideração na classificação, mas o flúor foi usado na aprovação da espécie fluornatromicrolita. Neste trabalho, são apresentados novos esquemas de nomenclatura para os minerais do grupo do pirocloro, que levam em consideração os íons ocupantes das posições A, B e Y. Os prefixos são sempre escritos por extenso (\'hidroxi\', \'fluor\', \'calcio\', \'natro\' etc), enquanto os sufixos são representados por símbolos químicos (Na, F, H2O etc) ou por [] (vazio). Os nomes raízes relacionam-se aos cátions predominantes na posição B, levando a termos como pirocloro, microlita, betafita e romeíta. São apresentados novos dados químicos por MEV-EDS e WDS (incluindo análises de Si, normalmente negligenciado na maioria dos dados da literatura). Foram analisados minerais de seis ocorrências em pegmatitos e uma em carbonatito. Os resultados obtidos permitem separar as espécies em três \'famílias\'. A primeira delas poderia ser denominada \'microlita\', envolvendo fluornatromicrolita, fluorcalciomicrolita, oxinatromicrolita e oxicalciomicrolita. Esta família foi identificada nas ocorrências da lavra do Morro Redondo, Coronel Murta, MG; lavra do Jonas, Conselheiro Pena, MG; mina Quixabá, Frei Martinho, PB; Pegmatito Volta Grande, Nazareno, MG; lavra do Ipê, Marilac, MG; e Pegmatito Ponte da Raiz, Santa Maria de Itabira, MG. A primeira das espécies, fluornatromicrolita, parece ser bem mais comum do que se imaginava, tendo sido descrita previamente no Brasil apenas em Quixabá, e agora verificada em diversas das ocorrências estudadas nesta tese. Apesar de usados os prefixos natro e cálcio, todas as amostras parecem tender para um termo de fórmula final (NaCa)Ta2O6F, ou seja, com Na=Ca em apfu, que poderia ser denominado, por exemplo, fluormicrolita-NaCa ou CaNa. O oxigênio é, algumas vezes, superior ao flúor (em apfu) na cavidade Y, dando origem a espécie oxi-. A segunda família poderia ser denominada \'hidromicrolita\', tendendo a [ [](H2O)]Ta2O6(H2O). Esta fórmula, entretanto, não é eletricamente neutra, necessitando que na cavidade A, (H2O) seja parcialmente substituído por cátions (Ba, U etc), ao mesmo tempo que parte do O da posição X seja substituído por (OH). Minerais desta família foram verificados no Pegmatito Volta Grande, Nazareno, MG. A terceira família, do \'pirocloro\', verificada apenas no carbonatito da mina Jacupiranga, Cajati, SP, inclui as espécies fluorcalciopirocloro e oxicalciopirocloro. Os novos nomes sugeridos parecem discriminar melhor as espécies, com base em cátions, vazios ou H2O predominantes nas posições A, B eY, permitindo inclusive uni-las em \'famílias\'. Esta nova nomenclatura apresenta também como vantagem não dar ênfase a componentes menores da cavidade A, bem como verificar nela a predominância de Ca ou Na. Adicionalmente, os cátions Ta, Nb e Ti passam a ter a mesma importância na cavidade B. Por outro lado são criados nomes \'exóticos\', como hidrohidromicrolita, ou \'impronunciáveis\', como hidro-[]-microlita. / Pyrochlore group minerals are important sources of niobium and tantalum and these metals are used in important technological applications such as steel manufacturing and eletronic components development. However, the majority of Brazilian occurrences are only partially characterized or there is no mineralogic study available. In addition, the official pyrochlore-group minerals classification system does not follow the IMA mineralogical nomenclature rules although this system is approved by IMA. In the A site, it does not differentiate between occupation by Ca and Na, and if there is one or more cation other than Na or Ca composing more than 20% of total A-atoms, then the species must be named according to the most abundant A-atom, other than Na or Ca. In spite of this, the species fluornatromicrolite was approved based on the predominance of Na in the A-site. Regarding the B-site occupation, the division among the subgroups is not made with a tripartite symmetrical classification: the species with Nb + Ta >2Ti and Nb > Ta are considered as pyrochlore subgroup minerals; if Nb + Ta > 2Ti and Ta ≥ Nb, the mineral will belong to the microlite subgroup; and if 2Ti ≥ Nb + Ta, the mineral will belong to the betafite subgroup. Isostructural species with other predominant cations in the B-site are not included in the pyrochlore-group (for example, romeite, with dominant Sb). The anions are not taken into account in the classification but the predominance of fluorine was used for the approval of the species fluornatromicrolite. In this present work new nomenclature schemes, based on the ions in A, B and Y sites, are presented. Prefixes are, for example, \'hidroxi\', \'fluor\', \'calcio\', \'natro\' etc., while sufixes are represented by chemical symbols (Na, F, H2O etc) or [] (vacancies). The root names (pyrochlore, microlite, betafite, romeite) are related to the dominant-constituent cations in the B position. New chemical data by MEV-EDS and WDS (including Si analysis, hardly ever mentioned in litetarature) were obtained. Six occurrences from pegmatites and one from carbonatite were analysed. The results allow the species to be grouped in three \'families\'. The first could be named as \'microlite\', and includies fluornatromicrolite, fluorcalciomicrolite, oxinatromicrolite and oxicalciomicrolite. This family was identified in Morro Redondo quarry, Coronel Murta, MG; Jonas quarry, Conselheiro Pena, MG; Quixabá mine, Frei Martinho, PB; Volta Grande pegmatite, Nazareno, MG; Ipê quarry, Marilac, MG and Ponte da Raiz pegmatite, Santa Maria de Itabira, MG. Fluornatromicrolite seems to be more common than was previously thought. It was previously described only in Quixabá but now many other occurrences are known. Although \'natro\' and \'calcio\' prefixes were used, all the formulae seem to approach the term (NaCa)Ta2O6F. As Na approximately equals Ca (apfu) it could be used the name fluornatromicrolite-Na-Ca or CaNa could be used. The oxigen content is sometimes greater than F content in the Y position. This generates the oxi- species. The second family could be named \'hidromicrolite\', becoming [ [] (H2O)]Ta2O6(H2O). This formulae is not eletrically neutral so the H2O is replaced by cations (Ba, U etc) in the A cavity while the O is replaced by (OH) in the X position. Minerals from this family were identified in the Volta Grande pegmatite, Nazareno, MG. The third family, \'pyrochlore\', was only verified in the Jacupiranga mine, Cajati, SP, including fluorcalciopyrochlore and oxicalciopyrochlore species. The suggested new names, based on cations, vacancies or H2O dominant constituents of A, B and Y sites, seem to better describe the species, allowing their grouping in families. This new nomenclature has the advantage of not emphasize minor constituents in the A cavity, and verify the dominance of Ca or Na. Furthermore, Ta, Nb and Ti cations have the same balance in B cavity. On the other hand, exotic names were created such as hydrohydromicrolite or unpronounceable as hydro-[]-microlite.

This diploma thesis is concerned with the creation of computer game (adventury) and its consequent use in chemistry lessons at primary school. The game may be used as means of motivation. It is set in the surroundings of Jindřichův Hradec and it includes a set of tests that enable pupils to test their knowledge of organic nomenclature.

This scholarly work of conclusion of course (TACC), consisting of a scientific paper and a product of speech, discusses words representing the content (keywords and descriptors) used in abstracts of academic papers defended in 2013 and 2014, the professional master's in Health Education (MEPS), identifying them as terms finalizers and indexers of research. The method adopted was of documentary nature, exploratory and descriptive, with quantitative perspective, investigating 37 research through semi-structured, electronic questionnaire containing a total of 17 questions, with the first five draw the General profile of all jobs and the following 12 identify each of the terms that are described in their respective summaries. The interrogative instrument was developed by the researcher in the own masters through the platform Google drive, to support the documentary analysis, being validated through an Electronic Validation Panel during the discipline technology applied in teaching and research in health (TAEPS), from the same institution. The variables analyzed were: (a) amount of keywords, (b) finalizer Nomenclature of summary: keywords or descriptors, (c) characterization of keywords: free and structured terms, (d) frequency of keywords, (and) Terminology of input keywords, (f) capture of key words in the titles and (g) score used between the keywords. The amount of keywords used pointed out that the summaries of the TACC did not follow an internal standardization of MEPS, but it was necessary to fit the journals chosen for submission, after the defence of academic papers, following the requirements presuppose the possibility of publication. Various terms used as keywords summaries were not found in the main terminology banks (MeSH, DeCS and Thesaurus), but had strength so the construction of the indexing representative academic work as the terms present in the bases of access, being possible to suggest new terms are included in the recovery of information portals. Finally, the authors of the TACC used encoded descriptors. However, do not have cited in their methodologies, registry numbers, or the portal in which they were obtained, leading to complete lack of practice when accessing the databases available, where the distinction between free or structured terms could contribute better with the correct choice of words post-production of their abstracts. Points out that various terminologies used by them, had great relevance in cohesion and coherence in summaries in which they found, showing strong potential for indexing the portal DeCS, which highlights the need for even more dynamic and constant supply of new terms, enabling more research grants, from the enrichment of databases available, and taking into account the existing records. In order to target students, teachers and researchers, more thorough management of the finalizer of nomenclature summaries, which will represent the content of scholarly works, from graduations and post-graduate degrees and academic professionals, was created, as a product of intervention, an educational blog titled ‘Key words in Scientific Production of MEPS’, which guides you through the proper use of the words representative of abstracts (keywords and descriptors). / O presente Trabalho Acadêmico de Conclusão de Curso (TACC), composto por um artigo científico e um produto de intervenção, discute sobre palavras representativas do conteúdo (palavras-chave e descritores) utilizadas nos resumos dos trabalhos acadêmicos defendidos em 2013 e 2014, no Mestrado Profissional em Ensino na Saúde (MPES), identificando-as como termos finalizadores e indexadores das pesquisas. O método adotado foi de cunho documental, exploratório e descritivo, com perspectiva quantitativa, investigando 37 pesquisas, através de questionário eletrônico semiestruturado, contendo um total de 17 perguntas, sendo que as cinco primeiras desenham o perfil geral de todos os trabalhos e as 12 seguintes identificam cada um dos termos descritos nos seus respectivos resumos. O instrumento interrogativo foi desenvolvido pela pesquisadora no próprio mestrado, através da plataforma Google drive, para subsidiar a análise documental, sendo validado por meio de um Painel de Validação Eletrônico durante a disciplina Tecnologia Aplicada no Ensino e Pesquisa na Saúde (TAEPS), da mesma instituição. As variáveis analisadas foram: (a) Quantidade de palavras-chave, (b) Nomenclatura finalizadora de resumo: palavras-chave ou descritores, (c) Caracterização das palavras-chave: termos livres e estruturados, (d) Frequência das palavras-chave, (e) Terminologias de entrada das palavras-chave, (f) Captação de palavras-chave nos títulos e (g) Pontuação usada entre as palavras-chave. A quantidade de palavras-chave usadas apontou que os resumos dos TACC não seguiram uma normatização interna do MPES, mas foi preciso se adequar aos periódicos escolhidos para submissão, após a defesa dos trabalhos acadêmicos, seguindo as exigências pressupostas para a possibilidade de publicação. Vários termos utilizados como palavras-chave dos resumos não foram encontrados nos principais bancos de terminologias (MeSH, DeCS e Thesaurus), mas possuíam força indexadora tão representativa à construção do trabalho acadêmico quanto os termos presentes nas bases de acesso, sendo possível sugerir que novos termos sejam incluídos nos portais de recuperação das informações. Por fim, os autores dos TACC utilizaram descritores codificados. Entretanto, não citaram em suas metodologias, a numeração do registro, nem o portal no qual os mesmos foram obtidos, levando a concluir haver falta de prática ao acessar as bases de dados disponíveis, onde a distinção entre termos livres ou estruturados poderia contribuir melhor com a escolha correta das palavras finalizadoras de seus resumos. Ressalta-se ainda que várias terminologias usadas por eles, possuíam grande relevância na coesão e coerência nos resumos em que se encontravam, apresentando forte potencial de indexação no portal DeCS, o que evidencia a necessidade de alimentação ainda mais dinâmica e constante de novos termos, possibilitando mais subsídios às pesquisas, a partir do enriquecimento das bases de dados disponíveis e, levando em consideração os registros existentes. Com o intuito de direcionar discentes, docentes e pesquisadores, no manejo mais minucioso da nomenclatura finalizadora de resumos, que representarão o conteúdo dos trabalhos acadêmicos, oriundos de graduações e pós-graduações acadêmicas e profissionais, foi criado, como produto de intervenção, um blog educacional intitulado ‘Descritores na Produção Científica do MPES’, o qual orienta o uso adequado das palavras representativas de resumos.

The folk costume, including its revitalized forms, is one of the most significant and simultaneously one of the most studied categories in the research of european folk culture. This research project is focused on reflections of the branch nomenclature of folk costume in the context of ethnological methodology with consideration of museological aspects and above all the history and development of the branch in its relevant european schools, streams and centers. The work is based on comparative communication of the author with less or more important characters in the branch (or closely connected) who were oriented on research of the folk costume cathegory or widely of the material culture, mostly through their professional texts. The contemporary researchers, whose work is not finished yet, are not evaluated in this work by intention, but their work and thoughts are reflected strongly as an important inspiration source of the presented dissertation. The primary goal of this project is not only observation and study the terminology and methodology for technical processing of the ethnological cathegory of folk costume, but also the research of the history of this branch underpinning its fundamental as well as less important aspects in the european international context.

Os minerais do grupo do pirocloro (A2B2X6Y1) apresentam grande interesse econômico, principalmente como fonte de nióbio e tântalo, metais que possuem importantes aplicações tecnológicas como a fabricação de aço e a confecção de componentes eletrônicos. Apesar de seu interesse científico e econômico, a maioria das ocorrências brasileiras de minerais do grupo do pirocloro está apenas parcialmente caracterizada ou não dispõe de nenhum estudo mineralógico. Adicionalmente, o atual sistema de classificação dos minerais do grupo do pirocloro, apesar de aprovado pela IMA, não segue as regras gerais de nomenclatura de minerais da própria IMA. Na posição A, não há diferenciação na ocupação por Ca e por Na, e se um ou mais cátions diferentes de Na ou Ca compuserem mais de 20 % total de átomos na posição A, então a espécie é nomeada pelo átomo mais abundante em A (exceto Na e Ca). Por outro lado, a espécie fluornatromicrolita foi aprovada com base na predominância de Na na posição A. Com relação à ocupação da posição B, a divisão entre os grupos não é feita com uma classificação tripartite: as espécies com Nb + Ta >2Ti e Nb > Ta são consideradas como do subgrupo do pirocloro; se Nb + Ta > 2Ti e Ta ≥ Nb, o mineral irá pertencer ao subgrupo da microlita; e se 2Ti ≥ Nb + Ta, o mineral irá pertencer ao subgrupo da betafita. Espécies isoestruturais com outros cátions predominantes na posição B não são incluídas no grupo do pirocloro (por exemplo, romeíta com Sb dominante). Os ânions não são levados em consideração na classificação, mas o flúor foi usado na aprovação da espécie fluornatromicrolita. Neste trabalho, são apresentados novos esquemas de nomenclatura para os minerais do grupo do pirocloro, que levam em consideração os íons ocupantes das posições A, B e Y. Os prefixos são sempre escritos por extenso (\'hidroxi\', \'fluor\', \'calcio\', \'natro\' etc), enquanto os sufixos são representados por símbolos químicos (Na, F, H2O etc) ou por [] (vazio). Os nomes raízes relacionam-se aos cátions predominantes na posição B, levando a termos como pirocloro, microlita, betafita e romeíta. São apresentados novos dados químicos por MEV-EDS e WDS (incluindo análises de Si, normalmente negligenciado na maioria dos dados da literatura). Foram analisados minerais de seis ocorrências em pegmatitos e uma em carbonatito. Os resultados obtidos permitem separar as espécies em três \'famílias\'. A primeira delas poderia ser denominada \'microlita\', envolvendo fluornatromicrolita, fluorcalciomicrolita, oxinatromicrolita e oxicalciomicrolita. Esta família foi identificada nas ocorrências da lavra do Morro Redondo, Coronel Murta, MG; lavra do Jonas, Conselheiro Pena, MG; mina Quixabá, Frei Martinho, PB; Pegmatito Volta Grande, Nazareno, MG; lavra do Ipê, Marilac, MG; e Pegmatito Ponte da Raiz, Santa Maria de Itabira, MG. A primeira das espécies, fluornatromicrolita, parece ser bem mais comum do que se imaginava, tendo sido descrita previamente no Brasil apenas em Quixabá, e agora verificada em diversas das ocorrências estudadas nesta tese. Apesar de usados os prefixos natro e cálcio, todas as amostras parecem tender para um termo de fórmula final (NaCa)Ta2O6F, ou seja, com Na=Ca em apfu, que poderia ser denominado, por exemplo, fluormicrolita-NaCa ou CaNa. O oxigênio é, algumas vezes, superior ao flúor (em apfu) na cavidade Y, dando origem a espécie oxi-. A segunda família poderia ser denominada \'hidromicrolita\', tendendo a [ [](H2O)]Ta2O6(H2O). Esta fórmula, entretanto, não é eletricamente neutra, necessitando que na cavidade A, (H2O) seja parcialmente substituído por cátions (Ba, U etc), ao mesmo tempo que parte do O da posição X seja substituído por (OH). Minerais desta família foram verificados no Pegmatito Volta Grande, Nazareno, MG. A terceira família, do \'pirocloro\', verificada apenas no carbonatito da mina Jacupiranga, Cajati, SP, inclui as espécies fluorcalciopirocloro e oxicalciopirocloro. Os novos nomes sugeridos parecem discriminar melhor as espécies, com base em cátions, vazios ou H2O predominantes nas posições A, B eY, permitindo inclusive uni-las em \'famílias\'. Esta nova nomenclatura apresenta também como vantagem não dar ênfase a componentes menores da cavidade A, bem como verificar nela a predominância de Ca ou Na. Adicionalmente, os cátions Ta, Nb e Ti passam a ter a mesma importância na cavidade B. Por outro lado são criados nomes \'exóticos\', como hidrohidromicrolita, ou \'impronunciáveis\', como hidro-[]-microlita. / Pyrochlore group minerals are important sources of niobium and tantalum and these metals are used in important technological applications such as steel manufacturing and eletronic components development. However, the majority of Brazilian occurrences are only partially characterized or there is no mineralogic study available. In addition, the official pyrochlore-group minerals classification system does not follow the IMA mineralogical nomenclature rules although this system is approved by IMA. In the A site, it does not differentiate between occupation by Ca and Na, and if there is one or more cation other than Na or Ca composing more than 20% of total A-atoms, then the species must be named according to the most abundant A-atom, other than Na or Ca. In spite of this, the species fluornatromicrolite was approved based on the predominance of Na in the A-site. Regarding the B-site occupation, the division among the subgroups is not made with a tripartite symmetrical classification: the species with Nb + Ta >2Ti and Nb > Ta are considered as pyrochlore subgroup minerals; if Nb + Ta > 2Ti and Ta ≥ Nb, the mineral will belong to the microlite subgroup; and if 2Ti ≥ Nb + Ta, the mineral will belong to the betafite subgroup. Isostructural species with other predominant cations in the B-site are not included in the pyrochlore-group (for example, romeite, with dominant Sb). The anions are not taken into account in the classification but the predominance of fluorine was used for the approval of the species fluornatromicrolite. In this present work new nomenclature schemes, based on the ions in A, B and Y sites, are presented. Prefixes are, for example, \'hidroxi\', \'fluor\', \'calcio\', \'natro\' etc., while sufixes are represented by chemical symbols (Na, F, H2O etc) or [] (vacancies). The root names (pyrochlore, microlite, betafite, romeite) are related to the dominant-constituent cations in the B position. New chemical data by MEV-EDS and WDS (including Si analysis, hardly ever mentioned in litetarature) were obtained. Six occurrences from pegmatites and one from carbonatite were analysed. The results allow the species to be grouped in three \'families\'. The first could be named as \'microlite\', and includies fluornatromicrolite, fluorcalciomicrolite, oxinatromicrolite and oxicalciomicrolite. This family was identified in Morro Redondo quarry, Coronel Murta, MG; Jonas quarry, Conselheiro Pena, MG; Quixabá mine, Frei Martinho, PB; Volta Grande pegmatite, Nazareno, MG; Ipê quarry, Marilac, MG and Ponte da Raiz pegmatite, Santa Maria de Itabira, MG. Fluornatromicrolite seems to be more common than was previously thought. It was previously described only in Quixabá but now many other occurrences are known. Although \'natro\' and \'calcio\' prefixes were used, all the formulae seem to approach the term (NaCa)Ta2O6F. As Na approximately equals Ca (apfu) it could be used the name fluornatromicrolite-Na-Ca or CaNa could be used. The oxigen content is sometimes greater than F content in the Y position. This generates the oxi- species. The second family could be named \'hidromicrolite\', becoming [ [] (H2O)]Ta2O6(H2O). This formulae is not eletrically neutral so the H2O is replaced by cations (Ba, U etc) in the A cavity while the O is replaced by (OH) in the X position. Minerals from this family were identified in the Volta Grande pegmatite, Nazareno, MG. The third family, \'pyrochlore\', was only verified in the Jacupiranga mine, Cajati, SP, including fluorcalciopyrochlore and oxicalciopyrochlore species. The suggested new names, based on cations, vacancies or H2O dominant constituents of A, B and Y sites, seem to better describe the species, allowing their grouping in families. This new nomenclature has the advantage of not emphasize minor constituents in the A cavity, and verify the dominance of Ca or Na. Furthermore, Ta, Nb and Ti cations have the same balance in B cavity. On the other hand, exotic names were created such as hydrohydromicrolite or unpronounceable as hydro-[]-microlite.

Abstract My essay focuses on the construction of identity in virtual spaces but with an emphasis on Facebook. The purpose of my thesis is to analyze the construction of identities online and the characteristics attributable to online identities. Also, I attempt to draw a comparison between the modernist and postmodernist concept of self presentation and how they operate. With my essay, I demonstrate that the modernists view of self presentation online is arguably faulty by showing that contrary to their views identities are not stable nor fixed bur are fluid and constantly changing through the availability of technologically advanced computer languages and again by outlining the availability of tools that enable users create, and/or distort their identities Also, with my essay, I explain how these identities are maintained through a process called “impression management”. I analyze identity construction through the eyes of theorists like Erving Goffman, who proposes that we actors performing our identities, Sherry Turkle, who evaluates identity construction in the age of the internet and other theorists like Judith Butler, Joanne Finkelstein, Peggy A Thoits, Annette N Markham, Zizi Papacharissi among others. Digital Artifact: creation of a website that adopts a performative nature to depict the unstable locus of identity on Facebook. In order to achieve this, I would work on HTML, Flash, Photoshop to create a constantly changing array of texts and images using actual images from selected Facebook users’ accounts and actual status updates. Keyterms: Identity, Medium/Media, Nomenclature, Hyperreality, Representation, Culture and Performance. / 0704083287

Le secteur automobile est aujourd’hui face au paradoxe de la personnalisation de masse. La diversité de produits finis est en augmentation perpétuelle du fait de la croissance de la personnalisation offerte au client. La diversité de composants à laquelle doivent faire faces les Chaînes Logistiques résulte de cette diversité de produits finis à fabriquer. Même si le coût de la diversité reste difficilement mesurable, cette diversité à un impact majeur sur la performance économique des entreprises de production. Dans le secteur automobile, une grande partie de ces coûts sont induits par le nombre très important de contraintes entre composants. De façon opérationnelle, ces contraintes rendent difficile la définition de nomenclature. Dans cette thèse, nous étudions une nouvelle façon de représenter la diversité. Aussi, pour limiter l’inflation de la diversité de composants à gérer, les fabricants doivent améliorer sans cesse leurs processus de conception et de production. L’usage d’une architecture modulaire des produits doit permettre de simplifier ces contraintes et donc la diversité de composants. Le succès de la mise en place d’une telle architecture dépend d’un certain nombre de conditions que nous étudions aussi dans cette thèse. Enfin, parce que la diversité de composants peut aussi résulter d’une vision locale des enjeux de diversité en phase de conception, cette thèse propose aussi une méthode de standardisation des modules et de leurs composants invisibles du client, basée sur une vision économique globale. / Nowadays, the automotive sector faces the mass customization paradox. The end-product diversity is constantly increasing as the customer can customize more and more product features. The component variety that Supply Chains must deal with, results from the end-product variety to make. Though variety cost is hard to measure, variety has a great impact on the economic performance of today's manufacturers. In the automotive sector, a large portion of these costs are due to the great amount of constraints between components. On an operational point of view, these constraints lead to difficulties in the establishment of Bills of Materials. In this thesis, we define a new approach that describes the variety within Bills of Materials. In addition, in order to limit the inflation of component variety to manage, companies should improve continuously their design and manufacturing processes. The use of a modular architecture should allow to reduce the number of constraints between components and as a consequence, to reduce the component variety. The success of the application of such architecture depends on some prerequisites that we also focus on in this thesis. Finally, as component variety might result also from local interests in design phases, this thesis proposes also a model that aims at standardizing both modules and their components that is based on a global economic perspective.

The annotation of medical images is a critical task for many downstream applications. However, the lack of a unified annotation nomenclature has resulted in inconsistency and ambiguity in the storage and use of such data. In this thesis, we propose and evaluate a novel annotation nomenclature for medical images. Our nomenclature is designed to be intuitive, easy to use and to expand. We also developed a knowledge database storing large medical image datasets that integrates the new nomenclature. The database is implemented as a server application exposing REST APIs. This allows users to upload/download datasets and query the data based on the annotations and to integrate the system in existing frameworks. We conducted a user study to assess the usability characteristics of the label nomenclature and its integration in the new system. The results collected from the user base are positive. The nomenclature is well perceived and the users had rated positively the usability of the whole system. / Annotering av medicinska bilder är en kritisk uppgift för många efterföljande tillämpningar. Bristen på en enhetlig annoteringsnomenklatur har emellertid resulterat i inkonsekvens och tvetydighet i lagring och användning av sådana data. I denna avhandling föreslår och utvärderar vi en ny annoteringsnomenklatur för medicinska bilder. Vår nomenklatur är utformad för att vara intuitiv, lätt att använda och att expandera. Vi har också utvecklat en kunskapsdatabas som lagrar stora medicinska bildsätt som integrerar den nya nomenklaturen. Databasen är implementerad som en serverapplikation som exponerar REST API: er. Detta gör att användare kan ladda upp / ladda ner datasätt och söka efter data baserat på annotationer och integrera systemet i befintliga ramverk. Vi genomförde en användarstudie för att bedöma användbarhetskaraktäristikerna för etikettnomenklaturen och dess integration i det nya systemet. Resultaten som samlades in från användarbasen är positiva. Nomenklaturen är väl uppfattad och användarna har positivt betygsatt användbarheten i hela systemet.

Two broad themes of this research are, 1) to develop a generalized framework for studying the process of patient information acquisition and 2) to develop and evaluate automated techniques for identifying domain-specific vocabulary terms contained in, or missing from, a standardized controlled medical vocabulary with emphasis on those terms necessary for representing the canine physical examination. A generalized framework for studying the process of patient information acquisition is addressed by the Patient Information Acquisition Model (PIAM). PIAM illustrates the decision-to-perception chain which links a clinician's decision to collect information, either personally or through another, with the perception of the resulting information. PIAM serves as a framework for a systematic approach to identifying causes of missing or inaccurate information. The vocabulary studies in this research were conducted using free-text with two objectives in mind, 1) develop and evaluate automated techniques for identifying canine physical examination terms contained in the Systematized Nomenclature of Medicine and Veterinary Medicine (SNOMED), version 3.3 and 2) develop and evaluate automated techniques for identifying canine physical examination terms not documented in the 1997 release of the Unified Medical Language System (UMLS). Two lexical matching techniques for identifying SNOMED concepts contained in free-text were evaluated, 1) lexical matching using SNOMED version 3.3 terms alone and 2) Metathesaurus-enhanced lexical matching. Metathesaurus-enhanced lexical matching utilized non-SNOMED terms from the source vocabularies of the Metathesaurus of the Unified Medical Language System to identify SNOMED concepts in free-text using links among synonymous terms contained in the Metathesaurus. Explicit synonym disagreement between the Metathesaurus and its source vocabularies was identified during the Metathesaurus-enhanced lexical matching studies. Explicit synonym disagreement occurs, 1) when terms within a single concept group in a source vocabulary are mapped to multiple Metathesaurus concepts, and 2) when terms from multiple concept groups in a source vocabulary are mapped to a single Metathesaurus concept. Five causes of explicit synonym disagreement between a source vocabulary and the Metathesaurus were identified in this research, 1) errors within a source vocabulary, 2) errors within the Metathesaurus, 3) errors in mapping between the Metathesaurus and a source vocabulary, 4) systematic differences in vocabulary management between the Metathesaurus and a source vocabulary, and 5) differences regarding synonymy among domain experts, based on perspective or context. Three approaches to reconciling differences among domain experts are proposed. First, document which terms are involved. Second, provide a mechanism for selecting either vocabulary-based or Metathesaurus-based synonymy. Third, assign a "basis of synonymy" attribute to each set of synonymous terms in order to identify the perspective or context of synonymy explicitly. The second objective, identifying canine physical examination terms not documented in the 1997 release of the UMLS was accomplished using lexical matching, domain-specific free-text, the Metathesaurus and the SPECIALIST Lexicon. Terms contained in the Metathesaurus and SPECIALIST Lexicon were removed from free-text and the remaining character strings were presented to domain experts along with the original sections of text for manual review. / Ph. D.

"The area of study was restricted to those common flowering herbs of Denton County, Texas, which have conspicuous flowers or a conspicuous flower cluster. There were, however, many plants included in this flora which are common to several counties of north-central Texas. Since there has been no previous key devised for the herbs of Denton County, Texas, the purpose of this key was to provide a flora which could be used by elementary and high school instructors, as well as any other interested persons who lack an extensive knowledge of botanical nomenclature." -- leaf iv.