Online adolescent friendships and social networking among adolescents are current phenomena that have emerged, and exploded, as part of the digital age and the vast development of communication technologies. The primary aim of this study was to gain knowledge and understanding regarding the nature and quality of online friendships and social networking among adolescents. A sequential explanatory mixed method design, was put to use for the purpose of this study. The quantitative data was collected first in the form of a short survey, by utilising a self-developed questionnaire to obtain a general overview of the social network practices and the forming and maintaining of online friendships among adolescents. Twenty five participants took part in the survey. This study was followed by a qualitative study in the form of interviews, to clarify, elaborate and explain the quantitative findings. Five information rich participants were interviewed. The findings of the empirical investigation revealed that adolescents, being part of the Net Generation, base their concept of socialising with friends on digital and communication technology, especially cell phones. They are connected to their friends 24 hours a day. The sense of safety and support they experience through this constant connectedness strengthens their self-esteem, self-confidence and self-worth and contributes to their identity formation. It is therefore recommended that parents and educators should accept that adolescents live in a virtual world and their new way of socialising, needs to be acknowledged. Parents and educators should adjust accordingly, by getting educated in this field themselves. The Net Generation is a generation who focuses on relationships and collaboration through technology and this should be exploited by anybody who has contact or interacts with the adolescent of today. / Psychology of Education / M. Ed. (Guidance and Counselling)

No description available.

No description available.

Syftet med studien är att presentera ett designkoncept för publika diskussioner på nätet med målet att uppnå djupare diskussioner och minska mängden information overload. Arbetet använder metoden Concept Driven Interaction Design (CDID) som går ut på att skapa ett designkoncept utifrån flera olika teorier som appliceras genom interaktionsdesign. Ett designkoncept innehåller tre delar: ett namn, ett syfte och huvudprinciper. CDID innehåller sju steg som arbetet är utformat efter: 1.      Concept Generation – Summeras i en tabell som jämför diskussioner i forum (med flera antagande) och diskussioner med hjälp av metoden Philosophy for Children (P4C), samt annan teori. 2.      Concept Exploration – Åtta olika designaspekter identifieras utifrån jämförelsetabellen. 3.      Internal Concept Critique – Designaspekterna jämförs med två snarlika diskussionsformat. 4.      Design of Artifacts – Designkoncept version 1 skapas. 5.      External Design Critique – Intervjuer utförs för att undersöka intervjupersonerna generella erfarenheter av online diskussioner, testar antagandena från jämförelsetabellen och ge direkt feedback på första versionen av designkonceptet. 6.      Concept Revisited – Ändringar görs baserat på intervjumaterial och direkt feedback. 7.      Concept Contextualization – Designkonceptet kopplas tillbaka till litteraturen. Studien resulterar i ett designkoncept kallat CoFramer och stödjer dessa huvudprinciper som ställs i kontrast till material som identifierats genom intervjuerna: Tabell 1: CoFramers huvudprinciper och faktorer från intervjuer om diskussioner på forum. CoFramers huvudprinciper | Från intervjuer om diskussioner på forum Strukturerad början och slut | Diskussion utan tydligt slut Begränsat antal deltagare | Stor mängd deltagare Minimum antal deltagare | Många inaktiva åskådare Explicita deltagare | Lite information om deltagare Gemensamma förutsättningar | Otydlighet kring deltagares förutsättningar Begränsad informationstäthet per inlägg | Långa inlägg och/eller snabba inlägg Den röda tråden och parallella trådar | Oftast parallella trådar Aktiv samtalsledare | Outredda missförstånd Studien indikerar på att CoFramer bör resultera i mer strukturerade diskussioner och som utsätter användaren för en lägre mängd information overload och mindre grounding cost jämfört med vad som vanligtvis uppstår i publika diskussioner online. / The focus of this essay is to develop a design concept for online public discussions with deep discussions and low information overload. The method used is Concept Driven Interaction Design (CDID) which involves constructing a design concept by applying a variety of theories in tangible interaction design. A design concept has three basic parts: a name, high-level goals and outlines generic principles. CDID includes seven steps which is used in this work: 1.      Concept Generation – Formatted into a table that compare forum discussion (with several hypothesis) compared to discussions with the method Philosophy for Children (P4C) and other theories. 2.      Concept Exploration – Eight distinct design aspects are identified from the comparison table. 3.      Internal Concept Critique – The design aspects are compared to three similar discussion formats. 4.      Design of Artifacts – Design concept version 1 is created. 5.      External Design Critique – Interviews are conducted to explore their general experience of online discussions, investigate the hypothesis from the comparison table and to seek direct feedback on the first draft of the design concept. 6.      Concept Revisited – Changes are made to the design concept based on the interview material and the direct feedback. 7.      Concept Contextualization – The design concept is related to the original literature. The result of the study is a design concept named CoFramer. CoFramer’s generic principles are summarized and contrasted against factors identified from the interview material in this table: Tabell 2: CoFramer’s generic principles and interviews about online discussions. CoFramer’s generic principles | From interview material on forum discussion Organized start and ending | Discussions without clear ending Limited number of participants | Large number of participants Minimum number of participants | Large number of inactive spectators Explicit participants | Low information about participants Common conditions | Vagueness in participants conditions Limited information density per post | Long posts and/or fast posts The red thread and parallel threads | Often parallel threads Active facilitator | Unresolved misunderstandings The study indicates that CoFramer would create more structured discussions with a lower amount of information overload and less grounding cost compared what normally arise in public online discussions.

La tesi si colloca nell'ambito di studi sulla fraseologia nell'inglese prodotto da apprendenti. Presenta uno studio empirico delle sequenze di parole più ricorrenti in un corpus di inglese prodotto da apprendenti di livello avanzato durante chat asincrone in contesto universitario italiano. Secondo la letteratura d'area, sia nella lingua scritta che in quella parlata, le sequenze di parole degli apprendenti rivelano una scarsa attenzione alla variazione del registro a seconda del mezzo di comunicazione usato. Al fine di verificare la presenza di questa caratteristica in un tipo di comunicazione che si trova in posizione intermedia tra i due poli del continuum esistente tra parlato e scritto, la presente ricerca ha analizzato quantitativamente e qualitativamente le sequenze di parole più frequenti nel corpus di comunicazioni mediate dal computer (CMC) raccolto nell'ambito della presente ricerca. Successivamente, le sequenze più frequenti sono state confrontate con quelle estratte da due corpora di interlingua inglese prodotta da apprendenti italofoni, uno di testi scritti (ICLE, Granger et al. 2002) e uno interviste orali (LINDSEI, Gilquin et al. 2010 ). Il confronto ha rivelato che le sequenze più ripetute dagli apprendenti hanno caratteristiche distintive nei vari media e supporta solo in parte i precedenti studi in materia. Ciò è probabilmente dovuto sia alle caratteristiche di informalità e immediatezza della comunicazione mediata dal computer, che ai vantaggi motivazionali e al diverso tipo di elaborazione linguistica connaturato alla CMC. Per l'apprendente la CMC non presenta la stessa pressione comunicativa del parlato e, allo stesso tempo, egli ha la possibilità di monitorare la propria produzione in quanto distanziata da sé dal mezzo elettronico. / The present dissertation contributes to studies of phraseology in learner English. It is an analysis of recurrent sequences of words in a corpus of learner Computer-mediated Communication. English, collected by means of asynchronous chats in an Italian university context. Previous research has argued that the use of recurrent word sequences plays a major role in learner English fluency both in writing and in speech, and is one of the factors behind learner English register failures. Using a corpus-driven approach, the study analyses the most frequent word sequences extracted from the specially compiled Learner Chat Corpus (LCC). To determine the level of adaptation of learner English to different registers, data regarding 3-word sequences from LCC is compared with the Italian subcomponents of a well-known corpus of learner writing (ICLE, Granger et al. 2002) and a corpus of learner speech (LINDSEI, Gilquin et al. 2010 ). The cross-corpus comparisons provide evidence that learners employ combinations which make their English suitable to the mode they are using for communication. Quantitative and qualitative findings from the present research support only in part previous studies of learner English in terms of recurrent sequences. This is probably due both to the informality and spoken-like quality of CMC, and to its motivational advantages and processing differences connected to the fact that learners can monitor their output while communicating because learner language production is distanced by the electronic means.

The mobile phone forms part of a teenager’s life world and reality today and can be regarded as a tool with which they not only communicate, but also use them to gain access to the Internet, social media and social networking sites. The primary aim of this study was to determine if the mobile phone, with all its functionalities, has an impact on the development of the adolescent’s identity formation, social development and communication skills as well as the sense of the self. Another objective of this study was to determine what the opinions and perceptions are of older generations with regard to mobile practices of the youth. A concurrent triangulation mixed method design was utilised for the purpose of the study. The quantitative and qualitative studies were conducted simultaneously and the data and results from each method were integrated and interpreted as a whole. The quantitative data gathering method was short self-structured questionnaires that were completed by learners (190), teachers (35) and parents (21) to provide a general overview of mobile usage among adolescents. A single-group pre-test post-test experimental design and individual interviews were conducted with eight volunteers. Lastly, 12 learners took part in a focus group interview as a confirmation technique for all the information that was gathered. The findings of the empirical investigation revealed that the mobile phone is used nowadays as a social tool, a planning tool and a convenience tool. The constant connectedness the mobile phone provides, strengthens the adolescents’ self-esteem and self-confidence and contributes strongly to their self-worth. The mobile phone is used as a self-expressive personalised tool and forms part of the sense of the adolescent self. It was also found that adolescents build their relationships with others on a two-dimensional platform that involves online and offline communication and activities. A definite gap exists between older generations’ perceptions and adolescents in connection with the ways that adolescents use their mobile phones nowadays. Parents and teachers have to accept the fact that technology forms part of today’s youth and they should change their mind-sets with regard to this complicated and complex phenomenon. / Psychology of Education / D. Ed. (Psychology of Education)

The thesis deals with wattmetric and conductance principle of faulted feeder detection in medium voltage compensated distribution networks. These principles are analysed and tested with particular emphasis on high impedance earth faults. The first part of testing utilizes data about state of the system with earth fault, which was determined by designed static model of earth fault. The testing in the second part utilizes real records of high impedance earth faults. In both parts the wattmetric and conductance protections was presented on protective relays ABB REF 615, ABB REM 543 and Protection&Consulting RYo by means of unit OMICRON CMC 256plus. As a major result of performed tests are records of detection of particular earth faults. Based on these records it could be concluded, that functionality of protections is substantially dependent on magnitude of zero sequence voltage. Furthermore the wattmetric protections are dependent on fault resistance as well.

L'élaboration de composites à matrice céramique denses et à fibres continues multidirectionnelles par de nouveaux procédés hybrides a été étudiée. Les procédés développés reposent sur le dépôt d'interphases autour des fibres par Infiltration Chimique en phase Vapeur (CVI) puis sur l'introduction de poudres céramiques au sein de préformes fibreuses par infusion de suspensions aqueuses colloïdales concentrées et stables, et enfin sur la consolidation des préformes soit par frittage flash, soit par imprégnation réactive de métaux liquides.La consolidation des composites par frittage flash est très rapide (palier de maintien en température inférieure à 5 minutes) et permet d'obtenir des composites denses. Durant le frittage, la dégradation des fibres de carbone a pu être évitée en adaptant le cycle de pression afin de limiter l'évolution des gaz au sein du système.La densification totale des composites par imprégnation de métaux liquides a été obtenue en contrôlant attentivement les paramètres d'imprégnation afin d'éviter de piéger des espèces gazeuses au sein des préformes fibreuses.Les composites à fibres de carbone consolidés par frittage flash ou par imprégnation réactive de métaux liquide possèdent un comportement mécanique de type élastique endommageable ainsi qu'une contrainte à rupture en flexion voisine de 300 MPa. Ces composites ont montré leur capacité à s'autocicatriser dans des conditions oxydantes. Comparés aux composites à matrice céramiques élaborés par CVI, les composites densifiés par imprégnation de métaux liquide sont eux parfaitement denses et ont un comportement mécanique en traction à température ambiante similaire avec notamment une contrainte à rupture en traction de 220 MPa. / The fabrication of multidirectional continuous carbon fibers reinforced dense self healing Ceramic Matrix Composites by new short time hybrid processes was studied. The processes developed are based, first, on the deposition of fiber interphase and coating by chemical vapor infiltration, next, on the introduction of ceramic powders into the fibrous preform by Slurry Impregnation and, finally, on the densification of the composite by liquid-phase Spark Plasma Sintering (SPS) or by Reactive Melt Infiltration of silicon (RMI).The homogeneous introduction of the ceramic particles into the multidirectional fiber preforms was realized by slurry impregnation from highly concentrated (> 32 %vol.) and well dispersed aqueous colloid suspensions. The densification of the composites by spark plasma sintering was possible with a short (< 5 minutes) dwelling period in temperature. The chemical degradation of the carbon fibers during the fabrication was prevented by adapting the sintering pressure cycle to inhibit gas evolution inside the system. The composites elaborated are dense. The fully densification of the composites by RMI was realised by carefully controlling the impregnation parameters to avoid to entrap some gaseous species inside the fiber preforms. Our carbon fiber reinforced ceramic matrix composites processed by Spark Plasma Sintering or Reactive Melt Infiltration have a damageable mechanical behaviour with a room temperature bending stress at failure around 300 MPa and have shown their ability to self-healing in oxidizing conditions. Compared to the CMC processed by CVI, the composites processed with a final consolidation step by RMI are fully dense and have a similar room temperature tensile test behaviour with an ultimate tensile stress around 220 MPa.