Die vorliegende Arbeit verfolgt das Ziel, Cu(Ag)-Dünnschichten als potentiellen Werkstoff für Leiterbahnen in der Mikroelektronik zu untersuchen. Für die Beurteilung dieses Materialsystems wurden vier Schwerpunkte bezüglich der Schichtcharakterisierung definiert: Herstellung, Gefüge, thermomechanische Eigenschaften, Elektromigrationsresistenz. Grundlage sämtlicher Untersuchungen ist eine geeignete Probenpräparation. In Anlehnung an Technologien, die zur Zeit bei der Herstellung von reinen Cu-Leiterbahnen Anwendung finden, erfolgte die Beschichtung der Cu(Ag)-Schichten (Dicke bis 1 µm) galvanisch aus einem schwefelsauren Elektrolyten unter Additiveinsatz auf thermisch oxidierten Siliziumwafern. Hierbei war nicht nur die Abscheidung von ganzflächigen Dünnschichten, sondern auch die Beschichtung auf strukturierte Substrate von Interesse. Die erzeugten Schichtproben werden in ihren Gefügeeigenschaften, vergleichend zu reinen Kupferschichten, charakterisiert. Hierzu zählen Korngrößen und -orientierungen, thermisches Gefügeverhalten, Einbau, Verteilung und Segregation von Silber und Fremdstoffen sowie die elektrischen Eigenschaften. Von grundsätzlicher Bedeutung für das Elektromigrationsverhalten und damit für die Zuverlässigkeit und das Leistungsvermögen sind die thermomechanischen Eigenschaften. Diese werden an ausgedehnten Schichten mit der Substratkrümmungsmessung bis zu Temperaturen von 500°C beschrieben. Die Diskussion des mechanischen Schichtverhaltens umfasst sowohl thermische als auch temporale Charakteristika. Die Untersuchungen geben einen Einblick in die wirkenden Mechanismen des Stofftransports und des Spannungsabbaus. Den Abschluss der Arbeit stellen erste Experimente zum Elektromigrationsverhalten der Cu(Ag)-Dünnschichten dar. Den Kern dieser Analysen bilden Messungen an sog. Blech-Strukturen (Materialdriftexperimente). Hierbei werden geeignete Technologien für die mikrotechnologische Herstellung von derartigen Cu(Ag)-Strukturen vorgestellt. Anhand erster Messungen wird das Elektromigrationsverhalten von Cu(Ag)-Metallisierungen in seinen Grundcharakteristika beschrieben.

Στην παρούσα διατριβή μελετήθηκε χρήση λεπτών καταλυτικών ηλεκτροδίων Pt/YSZ και Pt/TiO2/YSZ στην έκταση του φαινομένου της ηλεκτροχημικής ενίσχυσης, χρησιμοποιώντας την πρότυπη αντίδραση οξείδωσης αιθυλενίου, σε οξειδωτικές συνθήκες (μεταξύ 280oC και 375oC) σε αντιδραστήρα μονής πελέτας. Βρέθηκε ότι η παρουσία ενός διεσπαρμένου υμενίου TiO2 μεταξύ του καταλυτικού ηλεκτροδίου και του στερεού ηλεκτρολύτη (YSZ), έχει σημαντική επίδραση στην έκταση του μεγέθους του φαινομένου της ηλεκτροχημικής ενίσχυσης της κατάλυσης. Οι τιμές του λόγου προσαύξησης ρυθμού και της φαρανταϊκής απόδοσης υπολογίστηκαν περίπου 2.5 και 4 φορές μεγαλύτερες για το στοιχείο όπου η TiO2 ήταν παρούσα. Αυτή η προσαύξηση στα μεγέθη αυτά οφείλεται τόσο σε μορφολογικές παραμέτρους, όπως η αυξημένη διασπορά της Pt στον φορέα και του μήκους των τριών φάσεων, παρουσία του υμενίου TiO2, αλλά κυρίως λόγω ενός μηχανισμού ενισχυμένης μεταφοράς προωθητικών ειδών Ο2- προς την καταλυτική επιφάνεια που υφίσταται λόγω της μικτής αγωγιμότητας (ιοντικής-ηλεκτρονιακής) της TiO2 σε οξειδωτικές συνθήκες αντίδρασης. Επίσης, μελετήθηκε η χρήση λεπτών καταλυτικών ηλεκτροδίων Pt εναποτεθειμένων με τη μέθοδο sputtering στην έκταση του φαινομένου της ηλεκτροχημικής ενίσχυσης, χρησιμοποιώντας την πρότυπη αντίδραση οξείδωσης αιθυλενίου, σε έναν μονολιθικό ηλεκτροχημικά ενισχυόμενο αντιδραστήρα. Βρέθηκε ότι και τέτοιου τύπου ηλεκτρόδια – καταλυτικά υμένια είναι ιδιαίτερα καταλυτικά ενεργά και είναι δυνατό να ενισχυθούν ηλεκτροχημικά σε μεγάλο βαθμό. Επίσης, ο αντιδραστήρας λειτούργησε επιτυχώς και παρατηρήθηκε ηλεκτροχημική ενίσχυση, υπό υψηλές ογκομετρικές παροχές (25 l/min), με ταχύτητες χώρου αντιδραστήρα που είναι κοντά σε αυτές που λειτουργούν οι βιομηχανικοί αντιδραστήρες (12000 h-1). Τέλος, μελετήθηκε η αναγωγή του CO2 από Η2 σε ηλεκτρόδια Cu/TiO2/YSZ χρησιμοποιώντας τόσο έναν αντιδραστήρα μονής πελέτας όσο και έναν μονολιθικό ηλεκτροχημικά ενισχυόμενο αντιδραστήρα υπό ατμοσφαιρική πίεση. Χρησιμοποιώντας τον αντιδραστήρα μονής πελέτας βρέθηκε ότι η αντίδραση καταλήγει στην παραγωγή CO και CH4 με εκλεκτικότητα σε CH4 κοντά στο 17%. Η εφαρμογή θετικών και αρνητικών τιμών δυναμικού ενισχύουν τον ρυθμό της αντίδρασης σε μεγάλο βαθμό και επιπλέον μπορεί να τροποποιηθεί και η εκλεκτικότητά της σε CΗ4 που είναι και το επιθυμητό προϊόν. Επίσης, η προσθήκη μικρών ποσοτήτων CH3OH (~0.5 kPa) στο μίγμα τροφοδοσίας βρέθηκε ότι τροποποιεί σημαντικά τον ρυθμό παραγωγής του CH4, η εκλεκτικότητα του οποίου αγγίζει το 100% ακόμη και από τους 280οC. Χρησιμοποιώντας τον μονολιθικό ηλεκτροχημικά ενισχυμένο αντιδραστήρα, MEPR, εξοπλισμένο με 20 πλάκες Cu/TiO2/YSZ τα προϊόντα της αντίδρασης ήταν CO, CH4 και C2H4. Η εκλεκτικότητα στην παραγωγή του CH4 και του C2H4 έφτασε έως το 80% και το 2%, αντίστοιχα ενώ η μέγιστη μετατροπή του CO2 έφτασε έως και το 40% στους 380οC. Όπως και στον αντιδραστήρα μονής πελέτας, η προσθήκη CH3OH στο μίγμα τροφοδοσίας είχε ως αποτέλεσμα η εκλεκτικότητα στην παραγωγή CH4 να αυξηθεί στο 100%. Τα αποτελέσματα αυτά δείχνουν ότι είναι εφικτή η απευθείας αναγωγή του CO2 προς χρήσιμους υδρογονάνθρακες σε ατμοσφαιρική πίεση. / In the present work the electrochemical promotion of Pt/YSZ and Pt/TiO2/YSZ catalyst-electrodes has been investigated, for the model reaction of C2H4 oxidation in an atmospheric pressure single chamber reactor, under oxygen excess between 280 and 375oC. It has been found that the presence of a dispersed TiO2 thin layer between the catalyst electrode and the solid electrolyte (YSZ), results in a significant increase of the magnitude of the electrochemical promotion of catalysis (EPOC) effect. The rate enhancement ratio upon current application and the faradaic efficiency values, were found to be a factor of 2.5 and 4 respectively, higher than those in absence of TiO2. This significantly enhanced EPOC effect via the addition of TiO2 suggests that the presence of the porous TiO2 layer enhances the transport of promoting O2- species onto the Pt catalyst surface. This enhancement may be partly due to morphological factors, such as increased Pt dispersion and three-phase-boundary length in presence of the TiO2 porous layer, but appears to be mainly caused by the mixed ionic-electronic conductivity of the TiO2 layer which results to enhanced O2- transport to the Pt surface via a self-driven electrochemical promotion O2- transport mechanism. Also, the use of thin catalytic Pt sputtered electrodes (Pt/YSZ/Au) was examined in the MEPR for the model reaction of C2H4 oxidation. It was found that such thin electrodes are catalytically active and can be electropromoted even under high gas flow rates (25 l/min) or high space velocity (HSV~12000 s-1), close to those that the industrial reactors operate. A single chamber reactor equipped with a Cu/TiO2/YSZ electrode and a monolithic electropromoted reactor (MEPR) with up to 20 thin Cu/TiO2/YSZ plate cells were also used to investigate the hydrogenation of CO2 at atmospheric pressure. Utilizing the single chamber reactor CO and CH4 was produced with selectivity to CH4 up to 17%. Both positive and negative applied potential significantly enhance the hydrogenation rate and selectivity to CH4. It was found that the addition of small (~0.5kPa) amounts of CH3OH in the feed has a pronounced promotional effect on the reaction rate and selectivity of the Cu/TiO2/YSZ cells. The selective reduction of CO2 to CH4 starts at 280oC (vs 350oC in absence of CH3OH) with near 100% CH4 selectivity at open-circuit and under polarization conditions at temperatures 280–380oC. Utilizing a MEPR equipped with 20 Cu/TiO2/YSZ cells CO, CH4 and C2H4 were produced with selectivities to CH4 and C2H4 up to 80% and 2%. The maximum CO2 conversion reached 40% at 380oC. The addition of small (~0.5 kPa) amounts of CH3OH in the feed has also a pronounced promotional effect on the reaction rate and selectivity to CH4 (near 100%) at open-circuit and under polarization conditions at temperatures 220–380oC. The results show the possibility of direct CO2 conversion to useful products in a MEPR via electrochemical promotion at atmospheric pressure.

This thesis is an attempt to understand ways to improve thermo-mechanical and structural properties of nano-structured materials. A detailed study on computational design and analysis of metallic nanowires is carried out. Molecular dynamic simulation method is applied. In particular, FCC metallic nanowires, NiAl, and CuZr nanowires are studied. Various bottom-up approaches are suggested with improved structural and thermo¬mechanical properties. In the first part of the thesis, Cu nanowires are considered. Existence of a novel and stable pentagonal multi-shell nanobridge structure of Cu under high strain rate tensile loading is reported. Such a structure shows enhanced mechanical properties. A three-fold pseudo-elastic-plastic shape recovery mechanism in such nanowires is established. This study also shows that the length of the pentagonal nanobridge structures can be characterized by its inelastic strain. It is also reported that an initial FCC structure is transformed into a new HCP structure. The evidence of HCP structure is confirmed with the help of experimental data published in the literature. Subsequent to the above study, a novel mechanism involving coupled temperature-stress dependent reorientation in FCC nanowires is investigated. A detailed map is generated for size dependent stress-temperature induced solid-solid reorientation in Cu nanowires. In the second part of the thesis, deformation mechanisms in NiAl based intermetallic nanowires are studied. A novel mechanism of temperature and cross-section dependent pseudo-elastic/pseudo-plastic shape and strain recovery by an initial B2 phase of NiAl nanowire is reported. Such a recoverable strain, which is as high as ~ 30%, can potentially be utilized to realize various types of shape memory and strain sensing phenomena in nano-scale devices. An asymmetry in tensile and compressive yield strength behavior is also observed, which is due to the softening and hardening of the nanowires under tensile and compressive loadings, respectively. Two different deformation mechanisms dominated by twinning under tension and slip under compression are found. Most interestingly, a superplastic behavior with a failure strain of up to 700% in the intermetallic NiAl nanowires is found to exist at a temperature of 0.36Tm. Such superplastic behavior is attributed to the transformation of the nanowire from a crystalline phase to an amorphous phase after yielding of the nanowire. In the last part the work, another type of nanowires having Cu-Zr system is considered. A novel stress induced martensitic phase transformation from an initial B2 phase to BCT phase in a CuZr nanowire under tensile loading is reported. It is further shown that such a stress induced martenistic phase transformation can be achieved under both tensile as well as compressive loadings. Tensile-compressive asymmetry in the stress-strain behavior is observed due to two different phase transformation mechanisms having maximum transformation strains of ~ 5% under compressive loading and ~ 20% under tensile loading. A size and temperature dependent tensile phase transformation in the nanowire is also observed. Small nanowires show a single step tensile phase transformation whereas the nanowires with larger size show a two step deformation mechanism via an intermediate R-phase hardening followed by R-phase yielding. A study of energetic behavior of these nanowires reveals uniform distribution of stress over the nanowire cross-section and such stress distribution can lead to a significant improvement in its thermo-mechanical properties. Similar improvement is demonstrated by designing the nanowires via manipulating the surface configuration of B2-CuZr system. It is found that the CuZr nanowires with Zr atoms at the surface sites are energetically more stable and also give a uniform distribution of stresses across the cross-section. This leads to the improvement in yield strength as well as failure strain. An approach to design energetically stable nano-structured materials via manipulating the surface configurations with improved thermo-mechanical properties is demonstrated which can help in fundamental understanding and development of similar structures with more stability and enhanced structural properties. Further ab-initio and experimental studies on the confirmation of the stability of the nanowires via manipulating the surface site is an open area of research and related future scopes are highlighted in the closure.

Ce travail de thèse a porté sur l'élaboration de nanoparticules et de couches minces d'oxydes spinelles mixtes de MxCo2-xMnO4 (M = Ni, Cu, Zn ; x = 0, 0,15, 0,30, 0,60) semi-conducteurs, absorbants de lumière avec d'intéressantes applications potentielles pour la photo-catalyse et le photovoltaïque. Le premier chapitre présente tout d'abord une vue globale du contexte énergétique à l'échelle mondiale et des ressources d'énergie renouvelables, alternatives aux énergies fossiles les plus répandues. Une revue détaillée est ensuite faite des différents matériaux et systèmes employés dans la fabrication de cellules solaires, en portant une attention plus particulière à un nouveau type de cellules photovoltaïques en couches minces, dites " Tout-oxyde ", basées notamment sur l'utilisation d'oxydes de type spinelle utilisés comme absorbeurs solaires. Le deuxième chapitre présente les techniques expérimentales de synthèse et de caractérisation utilisées lors de ce travail de thèse. Le procédé de polycondensation inorganique, optimisé au laboratoire, utilisé pour synthétiser les poudres d'oxydes à basse température (T < 120 °C) sans agent organique complexe est décrit. Ensuite, les méthodes de préparation de dispersions colloïdales à l'ambiante dans l'éthanol et de films minces homogènes d'oxydes par trempage-retrait sont explicitées. Le troisième chapitre présente les résultats détaillés des structures atomiques et électroniques des matériaux de base à l'étude, issus de calculs par la méthode Density Functional Theory (DFT), réalisés en collaboration avec le laboratoire CEMES de Toulouse. Les résultats des calculs de densités électroniques et détermination de structures de bandes, réalisés pour la première fois à notre connaissance, sur l'ensemble de la solution solide MnxCo3-xO4 (0 = x = 3), sont comparés à nos données expérimentales, obtenues notamment sur les largeurs de bande interdite (gap) à partir de mesures optiques faites sur couches minces. Un gap de 0,8 eV est calculé, qui serait dû à des transitions inter-métalliques en sites B. Deux gaps à 1,5 et 2,2 eV, obtenus expérimentalement dans l'UV-VIS, qui augmentent avec la quantité de manganèse, correspondraient à des transitions respectives B-A et O-B, respectivement. Les propriétés magnétiques de ces matériaux sont également discutées. Le quatrième chapitre présente l'élaboration et la caractérisation (micro-)structurale des poudres et des couches minces d'oxydes de type spinelle. Toutes les compositions (Co2MnO4 dopé au Ni, Cu ou Zn) cristallisent dans une phase cubique. Les nanoparticules sont sphériques avec la taille variant entre 20 et 50 nm. Les couches minces homogènes ont été déposées sur quartz, alumine, nitrure de titane et platine afin de mesurer leurs propriétés électriques et optiques. Une température de frittage environ de 1000 °C sous air a été déterminée par dilatométrie et les couches sont stables jusqu'à 900 °C quel que soit le substrat. En revanche, seules les couches déposées sur platine permettent d'atteindre la température de frittage sous air (et d'accroitre la compacité donc la conductivité des couches) sans réaction avec le substrat. Le chapitre cinq présente les variations des propriétés optiques et électriques des couches minces avec le frittage. Les propriétés d'absorbance de lumière des couches minces ainsi préparées, mesurées sur une gamme de longueurs d'ondes du domaine spectral UV-visible, montrent deux bandes d'absorbance, correspondantes à deux valeurs de gap pour chaque composition. La propriété d'absorbance des couches minces augmente dans la gamme du visible après frittage et les gaps diminuent. Les couches minces sont plus compactées. La résistivité des couches minces diminue de 105 à 102 Omega.cm avec l'augmentation de la température de 20 à 300 ºC. Une étude parallèle, basée sur la préparation de films minces absorbants de lumière de Co2MnO4 et Cu2O par la technique de Pulsed Laser Deposition (PLD) est également présentée. / The present thesis deals with the synthesis and structural characterization of transition metals doped cobalt and manganese based spinel oxides MxCo2-xMnO4 (with M = Ni, Cu, Zn and x = 0, 0.15, 0.30, 0.60), in relationships with their conduction and optical properties. These materials are good p-type semiconductors and light absorbers in the UV and visible regions, therefore interesting for photo-catalysis and photovoltaics. The first chapter is a brief overview of the energy context and nature of global warming, renewable energy resources and a literature review of materials used for solar cells including the newly studied system type based on all-oxide photovoltaics. Chapter two presents all the experimental methods and characterization techniques used for this research work. The inorganic polycondensation method optimized in our laboratory and used for synthesizing spinel oxide powders at low temperature (T < 120 °C) without complex organic agents is described. Then, the preparation of colloidal dispersions stabilized at room temperature using an azeotrope solution based on absolute ethanol and water only is described, in order to obtain homogenous oxide thin films by the dip-coating technique. The third chapter presents detailed results on the atomic and electronic structures of the materials under study performed by using a full density functional theory investigation thanks to a collaboration with the CEMES. First principles electronic structure calculations were performed for the first time to our knowledge over the whole spinel oxide solid solution range MnxCo3-xO4 (0 = x = 3), and compared with our experimental data. A small band gap of ~ 0.8 eV is calculated, due to metal-metal transitions in B sites. The experimental band gaps observed at 1.5 and 2.2 eV, which increase with the amount of manganese, would correspond to B-A and O-B transitions, respectively. The magnetic properties of these materials are also discussed. Chapter four shows the experimental details of the preparation and characterization of the spinel oxide powders, colloidal dispersions and thin films. All samples (Ni, Cu or Zn-doped Co2MnO4) are well crystallized with a single cubic spinel oxide phase. Nanoparticles are spherical and their diameters vary from 20 to 50 nm, doping with Zn, Ni to Cu, mainly due to steric effects. Homogenous oxide thin films were deposited on quartz, alumina, titanium nitride and platinum in order to measure their optical and electrical properties, and to increase the film compactness (thus electrical conductivity and light absorbance) after thermal treatment. Thin films are well preserved up to 900 °C in air and can handle higher temperatures (up to 1000 ºC) on platinum without reaction with the substrate. Chapter five deals with the optical and electrical properties of thin films before and after sintering. The optical properties were measured over a wide range of wavelengths (UV-VIS). The optical properties of spinel oxide thin films show two strong absorption band gaps for each composition at the UV front and close to 700 nm in wavelength. These band gaps are direct and mostly lower than 2 eV for the first band. Both band gaps increase with further doping and decrease after annealing. Thin film resistivity is about 105 .cm at room temperature and decreases with increasing temperature (a few tens of 20cm at 300 ºC). In parallel to the soft chemistry method and dip-coating technique used to prepare our spinel oxide thin layers, Pulsed Laser Deposition technique was used to prepare pure Co2MnO4 and Cu2O dense thin films. Their structural and optical main features are discussed.

Acenes are a class of polycyclic aromatic hydrocarbons (PAH) with linearly fused benzene rings. They are widely considered as promising materials for organic and molecular electronics. However, larger molecules of this class possessing more than five rings are chemically extremely reactive and show a very low solubility. Hence, large acenes are difficult to handle, and the experimental data available to date is limited. The aim of this work is to show a very promising protocol of how acenes with different lengths can be stabilized and investigated on metallic surfaces. The experimental approach of on-surface synthesis is explored to generate the respective acenes directly on the metallic substrate via the reduction of suitable precursor molecules. High-resolution scanning probe microscopy (SPM) is employed at a temperature of 5 K to verify the chemical conversion at a single-molecule level. In the first part of this work, the on-surface synthesis of acenes is introduced via the example of tetracene (4-acene) formation on Cu(111). Precursors with 1,4-epoxy moieties preferably adsorb with their oxygen-rich site facing the substrate. Subsequently, they can be deoxygenated via annealing of the substrate or by single-molecule manipulation with the tip of the scanning probe microscope. In both cases, atomic force microscopy (AFM) measurements resolve the planar adsorption geometry of tetracene on the surface with atomic resolution. Based on these findings, scanning tunneling microscopy (STM) is employed to investigate the self-assembly patterns of on-surface generated anthracene (3-acene) and tetracene molecules after synthesis on Au(111). These measurements show intriguing organic nanostructures and supramolecular networks that can form at the metallic interface upon thermally-induced surface reactions. The second part of this thesis focuses on the electronic structure of acenes adsorbed on a metallic substrate. By applying the novel method of on-surface reduction, single and isolated hexacene (6-acene) molecules are investigated on Au(111). Scanning tunneling spectroscopy (STS) measurements indicate a weak interaction with the substrate and reveal five accessible molecular resonances at the organic-metal interface. The differential conductance maps with high spatial resolution at the respective resonant bias values compare well to elastic scattering quantum chemistry-based calculations. Finally, the experimental investigations of Br-substituted precursors show the stabilization of genuine unsubstituted heptacene (7-acene), as confirmed by imaging of the molecular structure via atomic-resolution STM. Accordingly, the precise characterization of this molecule via STS allows more insight into the electronic structure of adsorbed acenes with respect to their length. / Acene sind eine Klasse von polyzyklischen aromatischen Kohlenwasserstoffen mit linear kondensierten Benzolringen. Sie gelten weithin als vielversprechende Materialien für die organische und molekulare Elektronik. Jedoch sind die größeren Moleküle dieser Klasse mit mehr als fünf Ringen chemisch extrem reaktiv und zeigen eine sehr geringe Löslichkeit, daher gibt es bisher nur wenige experimentelle Untersuchungen ihrer Eigenschaften. Das Ziel dieser Arbeit ist es, Acene mit unterschiedlichen Längen auf einer metallischen Oberfläche stabilisieren und untersuchen zu können. Dabei wird der experimentelle Ansatz der Oberflächensynthese verfolgt und die jeweiligen Acene durch Reduktion von geeigneten Präkursoren direkt an einer metallischen Grenzfläche hergestellt. Hochauflösende Rastersondenmikroskopie an einzelnen Molekülen bei einer Temperatur von 5K nimmt dabei eine Schlüsselrolle im Nachweis der chemischen Umwandlung auf der Oberfläche ein. Im ersten Teil dieser Arbeit wird die Oberflächensynthese von Acenen am Beispiel von Tetracen (4-Acen) auf Cu(111) eingeführt. Die Ausgangsmoleküle mit funktionellen Gruppen adsorbieren bevorzugt mit ihrer sauerstoffreichen Seite auf dem Substrat und können dort sowohl thermisch als auch mithilfe der Spitze des Rastersondenmikroskops umgewandelt werden. In beiden Fällen wird die planare Adsorptionsgeometrie von Tetracen auf der Oberfläche mittels Rasterkraftmikroskopie mit atomarer Auflösung abgebildet. Darauf aufbauend wird Rastertunnelmikroskopie genutzt, um die Selbstassemblierung von Anthracen (3-Acen) und Tetracen nach der jeweiligen Synthese auf Au(111) zu untersuchen. Die Messungen zeigen unerwartete organische Nanostrukturen und supramolekulare Netzwerke, welche sich an der metallischen Grenzfläche durch die induzierte Oberflächenreduktion bilden können. Der zweite Teil dieser Arbeit beschäftigt sich mit den elektronischen Eigenschaften von adsorbierten Acenen. Durch die neuartige Methode der Oberflächenreduktion können einzelne Hexacene (6-Acen) auf Au(111) untersucht werden. Messungen basierend auf Rastertunnelspektroskopie geben Hinweise auf die schwache Wechselwirkung mit dem Substrat und zeigen fünf molekulare Eigenzustände, die im Experiment zugänglich sind. Die entsprechenden Abbildungen der differentiellen Leitfähigkeiten mit hoher Ortsauflösung sind in guter Übereinstimmung mit einer quantenmechanischen Modellierung. Schließlich wird die Stabilisierung von Heptacen (7-Acen) von Br-substituierten Präkursoren mittels Rastertunnelmikroskopie mit atomarer Auflösung gezeigt. Dadurch kann die elektronische Struktur von adsorbierten Acenen anhand ihrer Länge verglichen werden.

Dans ce travail nous démontrons, au travers de deux études, l'intérêt fondamental du couplage des techniques de photoémission résolue en angle (ARPES) et de spectroscopie tunnel (STS) dans l'analyse des propriétés électroniques d'interfaces nanostructurées. Dans la première partie, nous présentons une méthodologie permettant de déduire le potentiel de surface induit par la reconstruction triangulaire d'une monocouche d'Ag/Cu(111). Cette méthode est basée sur la mesure des gaps caractérisant la structure de bande de l'état de Shockley du système aux points de haute symétrie de la zone de Brillouin. L'évaporation d'adatomes de potassium permet d'augmenter le nombre de gaps accessibles en photoémission en décalant les bandes vers les états occupés. Dans un modèle d'électrons presque libres, leur amplitude nous donne accès aux premières composantes de Fourier du potentiel. La reconstruction de ce dernier dans l'espace direct nous permet ensuite de calculer la densité d'états locale que nous comparons aux mesures de conductance STS. La seconde partie est consacrée à l'étude de la croissance et des propriétés électroniques des molécules de 1,4-dibromobenzène (DBB) et 1,4-diiodobenzène (DIB) évaporées sur Cu(110). Leur dépôt à température ambiante sur la surface entraîne la déshalogénation des molécules et la formation de phases organométalliques. A 200°C, le système polymérise pour former des chaînes unidimensionnelles de poly(p-phénylène) parfaitement alignées. Les mesures ARPES révèlent l'existence d'une bande pi unidimensionnelle d'états HOMOs dispersant sous le niveau de Fermi. En STS, nous observons également, pour des petites chaînes, le confinement des états LUMOs dans la partie inoccupée du spectre. Le déconfinement de ces états pour les grandes chaînes conduit à la formation d'une bande continue croisant le niveau de Fermi, conférant au polymère un caractère métallique 1D. Le gap HOMO-LUMO est alors mesuré à 1.15 eV / In this work, through two different studies, we demonstrate the fundamental interest in the coupling of angle resolved photoemission (ARPES) and scanning tunneling spectroscopy (STS) to investigate the electronic properties of nanostructured interfaces. In the first part we present a methodology to determine the surface potential of the triangular reconstructed one monolayer of Ag/Cu(111) interface from ARPES. This method is based on the measurement of the Shockley state band structure’s gaps at the high symmetry points of the Brillouin zone. Deposition of potassium adatoms allows us to shift the surface state towards higher binding energies in order to increase the number of accessible gaps in photoemission. From the magnitude of these gaps we deduce the two first Fourier components of the potential felt by electrons using the nearly free electron model. Then we reconstruct it and calculate the local density of states in order to compare it with the conductance maps probed by STS. In the second part we report the study of the growth and the electronic properties of the two molecules 1,4-dibromobenzene (DBB) and 1,4-diiodobenzene (DIB) evaporated on Cu(110). For room temperature deposition, we first observe their deshalogenation and the formation of an intermediate organometallic phase. Then, above 200°C, the system polymerizes into a long-range ordered array of one dimensional poly(p-phenylene) polymer. ARPES intensity maps allowed us to identify a one dimensional graphene-like strongly dispersive pi-band below the Fermi energy. By STS we also observed LUMOs confined states for small chains over the Fermi level. The loss of confinement for long chains induces the formation of a continuous dispersive band which crosses the Fermi energy, conferring a 1D metallic character to the polymer. The HOMO-LUMO gap is found to be 1.15 eV

In this thesis, large organic molecules (DM15N, DM18N, Cu(dbm)2) were deposited. These molecules are cannot be deposited by thermal sublimation due the fact that they decompose at lower temperature than they sublime. The employed molecules to single molecular magnets, which can be potentially used as quantum bites (qubit). The new method of deposition atomic layer injection made by Bihur Crystal company was introduced and tested. The method uses liquid solution with molecules which is driven by argon gas through pulse valve to the sample placed in ultra-high vacuum chamber. During the deposition, droplets of solution are formed on the sample surface. The solvent can be removed by light annealing or by keeping the sample in the vacuum for couple of days. The molecules were investigated by x-ray photoelectron spectroscopy and by scanning electron microscopy to determine fragmentation of the molecules, to study topography of the resultant surface and homogeneity of the deposited layer. We found conditions at which the intact molecules are deposited on the sample surfaces and form molecular nano- and micro- crystals.

This diploma thesis deals with analysis and modification of thin layers using ion beams. The first part of this diploma thesis deals with phenomena accompanying ion beam bombardment of solid matter. The second part of this diploma thesis is concerned with Secondary Ion Mass Spectroscopy (SIMS) and Low Energy Ion Scattering (LAIS). This work convey some basic information about these two techniques and it also deals with some benefits result in their connection into parallel depth profiling mode (such as better depth resolution of the LEIS profile, quantification of the SIMS). These benefits are demonstrated on MoSi film measurement. Within the framework of this thesis a new UHV manipulator was designed. This new UHV manipulator is equipped with precise stepper UHV motor and since the proportions are smaller, the manipulation with a sample in a space limited UHV chamber is much more comfortable and more precise. The third part of this diploma thesis deals with ion-beam induced transformation of epitaxially grown Fe films with thickness of 22 monolayer (ML) and 44 ML on Cu(100) single crystal at room temperature. Metastable Fe films of 22 ML thickness were prepared in CO pressure and 44 ML Fe films were prepared by co-evaporation of Fe with Fe64Ni36 (invar). Structural changes are analyzed by scanning tunneling microscopy and low-energy electron diffraction. The aim of this thesis is to discuss the influence of the sputtering parameters such as ion dose and ion energy on the nucleation of bcc nanocrystals, their growth, final shape and size. The influence of different Ni concentration on stability of 44 ML thick Fe films is also discussed.

De nos jours, la durée de vie des modules d’électronique de puissance est désormais limitée par les technologies standards de conditionnement, telles que le câblage par fils et le brasage. Ainsi une optimisation des technologies actuellement employées n’est pas suffisante pour satisfaire les futures exigences de fiabilité. Pour dépasser ces limites, un nouveau module de puissance remplaçant les fils de connexion par des clips en cuivre a été développé. Ce design innovant vise à améliorer la fiabilité du module puisqu’il empêche la dégradation des fils de connexion, constituant bien souvent la principale source de défaillance. La contrepartie de ce gain de fiabilité réside dans la complexification de la structure interne du module. En effet, l’emploi d’un clip en cuivre nécessite une brasure supplémentaire fixant le clip à la puce. Ainsi, le comportement thermomécanique et les différents modes de rupture auxquels le composant est soumis lors de son utilisation doivent être caractérisés. Cette étude utilise la simulation numérique pour analyser avec précision le comportement de chaque couche de matériaux lors des cycles actifs de puissance. De plus, une étude de sensibilité à la fois expérimentale et numérique concernant les paramètres de tests est réalisée. Les zones critiques du module ainsi que les combinaisons critiques des paramètres de tests pour les différents modes de rupture sont mis en évidence. Par ailleurs, une analyse en mécanique de la rupture est conduite et la propagation des fissures à différentes zones clés est analysée en fonction des différents paramètres de tests. Les résultats obtenus permettent la définition de modèles de prédiction de durée de vie. / Today a point has been reached where safe operation areas and lifetimes of power modules are limited by the standard packaging technologies, such as wire bonding and soft soldering. As a result, further optimization of used technologies will no longer be sufficient to meet future reliability requirements. To surpass these limits, a new power module was designed using Cu clips as interconnects instead of Al wire bonds. This new design should improve the reliability of the module as it avoids wire bond fatigue failures, often the root cause of device failures. The counterpart for an improved reliability is a quite complicated internal structure. Indeed, the use of a Cu clip implies an additional solder layer in order to fix the clip to the die. The thermo-mechanical behavior and failure mechanisms of such a package under application have to be characterized. The present study takes advantage of numerical simulations to precisely analyze the behavior of each material layer under power cycling. Furthermore an experimental and numerical sensitivity study on tests parameters is conducted. Critical regions of the module are pointed out and critical combinations of tests parameters for different failure mechanisms are highlighted. Then a fracture mechanics analysis is performed and the crack growth at different locations is analyzed in function of different tests parameters. Results obtained enable the definition of lifetime prediction models.

Acenes are a class of polycyclic aromatic hydrocarbons (PAH) with linearly fused benzene rings. They are widely considered as promising materials for organic and molecular electronics. However, larger molecules of this class possessing more than five rings are chemically extremely reactive and show a very low solubility. Hence, large acenes are difficult to handle, and the experimental data available to date is limited. The aim of this work is to show a very promising protocol of how acenes with different lengths can be stabilized and investigated on metallic surfaces. The experimental approach of on-surface synthesis is explored to generate the respective acenes directly on the metallic substrate via the reduction of suitable precursor molecules. High-resolution scanning probe microscopy (SPM) is employed at a temperature of 5 K to verify the chemical conversion at a single-molecule level. In the first part of this work, the on-surface synthesis of acenes is introduced via the example of tetracene (4-acene) formation on Cu(111). Precursors with 1,4-epoxy moieties preferably adsorb with their oxygen-rich site facing the substrate. Subsequently, they can be deoxygenated via annealing of the substrate or by single-molecule manipulation with the tip of the scanning probe microscope. In both cases, atomic force microscopy (AFM) measurements resolve the planar adsorption geometry of tetracene on the surface with atomic resolution. Based on these findings, scanning tunneling microscopy (STM) is employed to investigate the self-assembly patterns of on-surface generated anthracene (3-acene) and tetracene molecules after synthesis on Au(111). These measurements show intriguing organic nanostructures and supramolecular networks that can form at the metallic interface upon thermally-induced surface reactions. The second part of this thesis focuses on the electronic structure of acenes adsorbed on a metallic substrate. By applying the novel method of on-surface reduction, single and isolated hexacene (6-acene) molecules are investigated on Au(111). Scanning tunneling spectroscopy (STS) measurements indicate a weak interaction with the substrate and reveal five accessible molecular resonances at the organic-metal interface. The differential conductance maps with high spatial resolution at the respective resonant bias values compare well to elastic scattering quantum chemistry-based calculations. Finally, the experimental investigations of Br-substituted precursors show the stabilization of genuine unsubstituted heptacene (7-acene), as confirmed by imaging of the molecular structure via atomic-resolution STM. Accordingly, the precise characterization of this molecule via STS allows more insight into the electronic structure of adsorbed acenes with respect to their length. / Acene sind eine Klasse von polyzyklischen aromatischen Kohlenwasserstoffen mit linear kondensierten Benzolringen. Sie gelten weithin als vielversprechende Materialien für die organische und molekulare Elektronik. Jedoch sind die größeren Moleküle dieser Klasse mit mehr als fünf Ringen chemisch extrem reaktiv und zeigen eine sehr geringe Löslichkeit, daher gibt es bisher nur wenige experimentelle Untersuchungen ihrer Eigenschaften. Das Ziel dieser Arbeit ist es, Acene mit unterschiedlichen Längen auf einer metallischen Oberfläche stabilisieren und untersuchen zu können. Dabei wird der experimentelle Ansatz der Oberflächensynthese verfolgt und die jeweiligen Acene durch Reduktion von geeigneten Präkursoren direkt an einer metallischen Grenzfläche hergestellt. Hochauflösende Rastersondenmikroskopie an einzelnen Molekülen bei einer Temperatur von 5K nimmt dabei eine Schlüsselrolle im Nachweis der chemischen Umwandlung auf der Oberfläche ein. Im ersten Teil dieser Arbeit wird die Oberflächensynthese von Acenen am Beispiel von Tetracen (4-Acen) auf Cu(111) eingeführt. Die Ausgangsmoleküle mit funktionellen Gruppen adsorbieren bevorzugt mit ihrer sauerstoffreichen Seite auf dem Substrat und können dort sowohl thermisch als auch mithilfe der Spitze des Rastersondenmikroskops umgewandelt werden. In beiden Fällen wird die planare Adsorptionsgeometrie von Tetracen auf der Oberfläche mittels Rasterkraftmikroskopie mit atomarer Auflösung abgebildet. Darauf aufbauend wird Rastertunnelmikroskopie genutzt, um die Selbstassemblierung von Anthracen (3-Acen) und Tetracen nach der jeweiligen Synthese auf Au(111) zu untersuchen. Die Messungen zeigen unerwartete organische Nanostrukturen und supramolekulare Netzwerke, welche sich an der metallischen Grenzfläche durch die induzierte Oberflächenreduktion bilden können. Der zweite Teil dieser Arbeit beschäftigt sich mit den elektronischen Eigenschaften von adsorbierten Acenen. Durch die neuartige Methode der Oberflächenreduktion können einzelne Hexacene (6-Acen) auf Au(111) untersucht werden. Messungen basierend auf Rastertunnelspektroskopie geben Hinweise auf die schwache Wechselwirkung mit dem Substrat und zeigen fünf molekulare Eigenzustände, die im Experiment zugänglich sind. Die entsprechenden Abbildungen der differentiellen Leitfähigkeiten mit hoher Ortsauflösung sind in guter Übereinstimmung mit einer quantenmechanischen Modellierung. Schließlich wird die Stabilisierung von Heptacen (7-Acen) von Br-substituierten Präkursoren mittels Rastertunnelmikroskopie mit atomarer Auflösung gezeigt. Dadurch kann die elektronische Struktur von adsorbierten Acenen anhand ihrer Länge verglichen werden.