The accuracy of numerical models analyzing hydrologic and hydraulic processes depends largely on how well the input terrain data represents the earth's surface. Modelers obtain terrain data for a study area by performing surveys or by gathering historical survey data. If a modeler desires to create a predictive model to simulate the addition of man-made features such as channels, embankments and pits, he must modify the terrain data to include these features. Doing this by hand is tedious and time consuming. In 2001 Christensen implemented a tool in the Surface-water Modeling System (SMS) software package for integrating man-made geometric features into surveyed terrain data. He called this process feature stamping. While Christensen's feature stamping algorithms decrease the time and effort required to integrate geometric features into existing terrain data, they only function on centerline-based features having a constant trapezoidal cross-section. In addition to placing geometric limitations on the features they stamp, Christensen's feature stamping algorithms also possess several instabilities. These instabilities arise when stamping features that leave the bounds of the terrain data, and when modifying and re-stamping features that have already been stamped. This thesis presents changes and enhancements made to Christensen's feature stamping algorithms. These changes and enhancements completely eliminate the instabilities found in Christensen's feature stamping algorithms and make it possible for numerical modelers to stamp more complex geometric features having compound slopes, asymmetric cross-sections and varying cross-sections along their length. Finally, additional feature stamping algorithms make it possible to stamp radial features such as mounds and pits.

A current trend in the semiconductor industry is the use of Multi-Processor Systems-on-Chip (MPSoCs) for a wide variety of applications such as image processing, automotive, multimedia, and robotic systems. Most applications gain performance advantages by executing parallel tasks on multiple processors due to the inherent parallelism. Moreover, heterogeneous structures provide high performance/energy efficiency, since application-specific processing elements (PEs) can be exploited. The increasing number of heterogeneous PEs leads to challenging communication requirements. To overcome this challenge, Networks-on-Chip (NoCs) have emerged as scalable on-chip interconnect. Nevertheless, NoCs have to deal with many design parameters such as virtual channels, routing algorithms and buffering techniques to fulfill the system requirements. This thesis highly contributes to the state-of-the-art of FPGA-based MPSoCs and NoCs. In the following, the three major contributions are introduced. As a first major contribution, a novel router concept is presented that efficiently utilizes communication times by performing sequences of arithmetic operations on the data that is transferred. The internal input buffers of the routers are exchanged with processing units that are capable of executing operations. Two different architectures of such processing units are presented. The first architecture provides multiply and accumulate operations which are often used in signal processing applications. The second architecture introduced as Application-Specific Instruction Set Routers (ASIRs) contains a processing unit capable of executing any operation and hence, it is not limited to multiply and accumulate operations. An internal processing core located in ASIRs can be developed in C/C++ using high-level synthesis. The second major contribution comprises application and performance explorations of the novel router concept. Models that approximate the achievable speedup and the end-to-end latency of ASIRs are derived and discussed to show the benefits in terms of performance. Furthermore, two applications using an ASIR-based MPSoC are implemented and evaluated on a Xilinx Zynq SoC. The first application is an image processing algorithm consisting of a Sobel filter, an RGB-to-Grayscale conversion, and a threshold operation. The second application is a system that helps visually impaired people by navigating them through unknown indoor environments. A Light Detection and Ranging (LIDAR) sensor scans the environment, while Inertial Measurement Units (IMUs) measure the orientation of the user to generate an audio signal that makes the distance as well as the orientation of obstacles audible. This application consists of multiple parallel tasks that are mapped to an ASIR-based MPSoC. Both applications show the performance advantages of ASIRs compared to a conventional NoC-based MPSoC. Furthermore, dynamic partial reconfiguration in terms of relocation and security aspects are investigated. The third major contribution refers to development and programming methodologies of NoC-based MPSoCs. A software-defined approach is presented that combines the design and programming of heterogeneous MPSoCs. In addition, a Kahn-Process-Network (KPN) –based model is designed to describe parallel applications for MPSoCs using ASIRs. The KPN-based model is extended to support not only the mapping of tasks to NoC-based MPSoCs but also the mapping to ASIR-based MPSoCs. A static mapping methodology is presented that assigns tasks to ASIRs and processors for a given KPN-model. The impact of external hardware components such as sensors, actuators and accelerators connected to the processors is also discussed which makes the approach of high interest for embedded systems.

No description available.

No description available.

No description available.

No description available.

I dagsläget står det svenska kraftnätet inför en stor utmaning om det ska kunna klara av att tillgodose Sveriges växande elbehov. Stora delar av kraftnätet måste förnyas samtidigt som det byggs ut. Vid projektering av nya kraftledningsgator måste geografisk information samlas in för att kunna planera arbetet och representera de möjliga kraftledningsgatorna som höjdmodeller. Det är då viktigt att denna data är korrekt. LiDAR-data är ett bra alternativ då det kan ge en bra bild av marken trots vegetation som kan befinna sig i en eventuell kraftledningsgata. I dagsläget används antingen Lantmäteriets Nationella Höjdmodellen (NH-modellen), eller så genomförs en luftburen laserskanning med hjälp av flygplan. Då NH-modellen ibland kan upplevas som otillräcklig på grund av sin låga upplösning, samtidigt som luftburen laserskanning kan vara kostsamt både ekonomiskt och ur en miljösynpunkt är det intressant att utforska alternativa metoder.    Syftet med detta examensarbete är att genomföra en jämförelseanalys av höjdmodeller genererade med LiDAR-data insamlade med UAV och flygplan för att få svar på vad som väsentligt skiljer dem åt och ifall LiDAR-data insamlat med UAV kan vara ett alternativ till LiDAR-data insamlat med flygplan. Detta görs tillsammans med företagen Nektab och Swescan för att undersöka möjligheterna att kunna erbjuda en ny produkt till sina kunder och uppdragsgivare. Ett tidigare projekterat område utanför Horndal i Dalarna, undersöktes då det fanns tillgängliga LiDAR-data från en tidigare luftburen laserskanning gjord med flygplan. LiDAR-data samlades in med drönare med två olika skanningsmetoder, repetitive och non-repetitive, den 3:e maj 2023. Bearbetning av punktmolnet genomfördes i DJI Terra och Terrasolids programvaror Terrascan och Terramatch. Kvalitetsberäkningar genomfördes i Excel. Höjdmodeller skapades i Esris Arcmap 10.8 och analyser gjordes för att jämföra de olika höjdmodellernas höjdvärden, lutning samt profiler.     Punktmolnen genererade med UAV-LiDAR hade en lägesnoggrannhet i höjd som uppfyllde kraven för HMK-standardnivå 3, och punktmolnet genererat med skanningsmetoden non-repetitive hade en bättre lägesnoggrannhet i höjd än punktmolnet genererat med flygplans-LiDAR. Skillnaderna som kunde upptäckas mellan de olika höjdmodellerna var små och påverkades både av skillnader i klassning och insamlingsmetod. Slutsatsen som drogs är att insamling av LiDAR-data med UAV och generering av kvalitativa höjdmodeller med dessa data är fullt möjligt för mindre områden så som det i det här arbetet. / The Swedish power grid is currently facing a big challenge if it’s going to be able to meet Sweden’s growing demand for electricity. While large parts of the power grid must be updated, there also needs to be a big expansion. When planning new corridors for the powerlines, geographical information must be collected to be able to visualize said corridors as Digital Elevation Models (DEMs) and it is thus important that the data is correct. LiDAR-data is a suitable alternative for this as it can represent the ground well despite any vegetation that might be present in the planned corridor. Currently open-source data from the Swedish National Land Survey, the National Elevation Model (the NH-model), is often used, or the area is mapped with airborne laser-scanning from a plane. However, the NH-model is sometimes not a suitable alternative due to its low resolution, while airborne laser-scanning can be both environmentally and economically costly. It is therefore interesting to explore alternative methods.    The aim of this bachelor thesis is to conduct a comparative analysis between DEMs generated by LiDAR-data collected by UAV and by plane to see where they differ, and if LiDAR-data collected by UAV is a potential alternative to LiDAR-data collected by plane. This will be done in collaboration with Nektab and Swescan to explore the possibility of being able to offer a new product to their customers and clients. A previously planned area outside the Swedish town of Horndal in the county of Dalarna, was used due to already existing plane-collected LiDAR-data. LiDAR-data was collected with an UAV through two different scanner-methods, repetitive and non-repetitive, on the 3rd of May 2023. The processing of the pointclouds were performed in DJI Terra and Terrasolids software Terrascan and Terramatch. Quality calculations and control was done in Excel. DEMs were created in Esris software Arcmap 10.8 and different analyses were performed to compare the DEMs elevation, slope, and profiles.    The point clouds generated from the UAV-LiDAR had a positional accuracy equivalent to the Swedish HMK-standard level 3, and the pointcloud generated from the non-repetitive­ scanner-method had a better positional accuracy for the z-value than the pointcloud generated from the plane-LiDAR. The differences between the DEMs were small and were caused both by difference in classification of the point clouds and collection method. The conclusion is that collection of LiDAR-data through UAV and the generation of high quality DEMs from this data is fully possible for smaller areas such as the one in this thesis.

This study examines what seems a lack of representation of non-white art and artists within the visual arts class in the Swedish secondary education, and what possible consequences that could have for people of color who do not fit the mold of being Swedish due to their non- white appearance. The empirical data have been obtained through a survey, former research of articles, and available literature from the critical race theoretical field. Results show that a reproduction of a canon of whiteness is being passed down through generations of art teachers with little to no sign of breaking its pattern. From the survey sent out to visual arts teacher students, findings show a hidden place [read the Arts/Science Class in Secondary Education] within the educational institutions where racism unremarked continues to strive through phenomenon ́s like; color-blindness and white hegemony.

Digitala terrängmodeller (DTM:er) används i samhället för många viktigafunktioner och behöver därför hållas uppdaterade när förändringar sker.Sverige har en nationell höjdmodell (NH) som innehåller höjddata över helalandet. Uppdateringen av NH förlitar sig mestadels på flygburen laserskanning(FLS). Den flygburna laserskanningsmetoden har generellt en högremätosäkerhet i tätbevuxen skog. Vid exploateringar eller framtida planeradeförändringar i skogsområden kan en mer exakt modell behövas. En utvärdering har genomförts av den handhållna laserskannern ZEB-REVO med syfte att bestämma vilken mätosäkerhet som kan uppnås i tätbevuxenskog, undersöka hur mätosäkerheten förändras med punktavståndet i denproducerade DTM:en samt vilken mätosäkerhet ZEB-REVO har i jämförelsemed NH i samma område. I studien har två skogstyper inkluderats bestående av granskog och tallskog.Mätosäkerheten har bestämts genom att mäta in terrestra kontrollprofiler medtotalstation. För att kunna genomföra en inmätning av kontrollprofiler har ettbruksnät etablerats genom ett fullständigt anslutet polygontåg viahelsatsmätning. De kända punkterna som polygontåget anslutits mot har mättsin med fri stationsetablering via SmartWorx. Resultatet visar att mätosäkerheten förbättras när punktavståndet reduceras.Mätningarna med ZEB-REVO har potential att uppnå en lägre mätosäkerhetän NH i båda skogstyperna. Resultatet för tallskogen visar att ZEB-REVO kanuppnå en lägesosäkerhet på 4-centimetersnivå och en medelavvikelse i höjd på0,018 m mot inmätta kontrollprofiler. Jämförelsen mot kontrollprofiler förområdet i granskogen visar att en medelavvikelse i höjd på 0,058 m gick attuppnå där. ZEB-REVO har potential att förbättra data i NH och data insamlad med ZEBREVOkan ligga till grund för terrängmodellering för projektering.Instrumentet kan även uppnå den bästa noggrannhetsklassningen, klass 1 i SISTS21144:2016 där en maximal medelavvikelse i höjd inte får överstiga 0,02m. / Digital terrain models (DTMs) are used in society for many importantfunctions and therefore need to be kept up to date when changes occur.Sweden has a national height model (NH) that provides height data across thewhole country. The update of NH mostly relies on airborne laser scanning(ALS). The airborne laser scanning method generally has a highermeasurement uncertainty in dense forests. When exploitation or futureplanned changes in forest areas occur, a more accurate model may need to beproduced. An evaluation has been carried out of the handheld laser scanner ZEB-REVO with the aim of determining the instrument's measurement uncertainty indense forests, evaluating how the measurement uncertainty changes with thepoint distance in the produced DTM and the measurement uncertainty ZEBREVOmay achieve in comparison with NH in the same area. The study included two different types of forest consisting of spruce and pineforest trees, respectively. Measurement uncertainty has been determined bymeasuring terrestrial control profiles with a total station. In order to be ableto carry out the measurement of control profiles, a working control networkhas been established through a fully connected traverse using full rounds ofmeasurement. The known points to which the traverse is connected have beenmeasured as free stations using SmartWorx. The results show that the measurement uncertainty improves when the pointdistance is reduced. The measurements with ZEB-REVO have the potential toachieve a lower measurement uncertainty than NH in both forest types. Theresults for the pine forest show that ZEB-REVO can achieve a 4 centimetrelevel uncertainty and an average deviation of height of 0,018 m against themeasured control profiles. The comparison with control profiles for the areain the spruce forest shows that an average deviation in height of 0,058 m wasachievable. ZEB-REVO has the potential to improve data in NH and data collected withZEB-REVO can form the basis for terrain modelling for projectionwork. Theinstrument can also achieve the best accuracy rating 1, for which themaximum mean deviation in height must not exceed 0.02 m.

Vibrationsförderer sind Stetigförderer, welche Fördergüter durch periodische Schwingbewegungen in gerichtete Bewegungen versetzen. Vibrationsförderer sind in der Handhabungstechnik, der Zuführung von Mikrobauteilen und feinen Pulvern, sowie in der Schüttgut verarbeitenden Schwerindustrie weit verbreitet. In dieser Arbeit erfolgt nach der Betrachtung des Stands der Technik von Vibrationsförderern und den Interpretationsmöglichkeiten der Förderorganbewegung, die Vorstellung und Diskussion weiterer analytischer Berechnungsansätze. Anschließend werden Störprozesse, die während des Guttransportes auf Vibrationsförderern immer wieder beobachtet werden, erstmals klassifiziert und mathematisch beschrieben. Um die DEM-Simulation von Vibrationswendelförderern und linearen Vibrationsförderern unter Verwendung des Gleit-, Wurf- und Haft-Gleitförderprinzips in der Software LIGGGHTS zu ermöglichen, wurde eine Softwareerweiterung entwickelt. Diese Erweiterung umfasst zwei Module, welche die Bewegungen von importierten CAD-Geometrien auf Basis von als Fourierreihen definierten harmonischen Schwingungen höherer Ordnung ermöglichen. Das Befehlsmodul viblin ermöglicht die Definition von translatorischen Schwingungen. Das Modul vibrot ermöglicht die Definition von Rotationsschwingungen um eine raumfeste Achse. Beide Bewegungsmodule ermöglichen die Definition von komplexen Schwingungszuständen der CAD-Geometrien. Untersuchungen der Mikroprozesse innerhalb einer Arbeitsperiode zeigen, für die Förderarten Wurf und Gleiten, alle notwendigen Abschnitte der Kraft- und Geschwindigkeitsverläufe am Fördergut. Die durchgeführten Validierungen stellen die Verwendung der DEM als Simulationswerkzeug in der Vibrationsfördertechnik sicher. Auf der Basis der abschließend durchgeführten Parameterstudien können in Zukunft Kalibrierungsmethoden bezüglich des Verhaltens von Partikeln auf vibrierenden Unterlagen entwickelt werden. / Vibratory conveyors are continuous conveyors which move the materials to be conveyed by periodic vibrations of the conveyor chute. Vibrating conveyors are used in handling technology, the supply of micro components and fine powders, as well as in bulk material processing heavy industry. Within this work the state of the art of vibratory conveyors and alternative interpretations of the conveyor movement are introduced. Afterwards further analytical approaches are discussed. Subsequently, interfering processes, which occur during the transport of the materials on vibratory conveyors are classified and mathematically described. To simulate vibrating spiral conveyors and linear vibration conveyors using the sliding, throwing or sticking-glide conveyor principle in the software LIGGGHTS, a software extension was developed. This extension includes two software modules, to define the movements of imported CAD geometries on the basis of as Fourier series defined harmonic oscillations. The viblin command module allows the definition of translatory vibrations. The module vibrot allows the definition of rotational vibrations around a fixed axis. Both motion modules allow the definition of complex vibrational states of the CAD geometries. Investigations of the micro processes within a working period showed all necessary sections of the force and speed progression on the conveyed particles for the conveyor principles of micro throw and slide. The validations constitute the basic function of the DEM as a simulation tool in the vibratory conveyor technology. The final parameter studies can be used to develop calibration methods to describe the motion of particles on vibrating plates