La photosynthèse artificielle est considérée comme étant un atout capable de fournir des carburants alternatifs et renouvelables par conversion et stockage de l'énergie solaire. Une approche prometteuse consiste en un développement de photo-catalyseurs moléculaires inspirés par des enzymes photosynthétiques naturelles. La première partie de cette thèse concerne les modèles artificiels du photosystème II (qui catalyse l'oxydation d'eau), composé d'un chromophore et d’un relais d’électrons comme équivalent synthétique correspondant à l'ensemble P680-TyrZ/His190 du photosystème II. Trois complexes ruthénium polypyridyl - imidazole - phénol avec un groupe méthylique à différentes positions sur l'anneau phénolique (Ru-xMe) ont été synthétisés et caractérisés par des méthodes électrochimiques et photophysiques. L’augmentation, comparée aux complexes précédents, du potentiel redox des groupes phénols (0.20 V->0.9 V par rapport à l’électrode de ferrocène) rend leur fonction de relais d’électron dans un système photocatalytique pour l'oxydation d'eau thermodynamiquement possible. Des études d’absorption transitoire ont révélé que le transfert d’électron intramoléculaire est rapide (5-10 µs dans solvant aprotique et < 100 ns dans l'eau) malgré la faible force motrice, mettant en evidence l'importance de la liaison hydrogène entre le phénol et le groupe imidazole. Les légères différences entre les trois complexes Ru-xMe ainsi que l’étude de l'effet de bases externes nous ont permis d’établir un mécanisme dans laquelle l'imidazole est impliqué dans une réaction de transfert de proton en cascade. L'acceptation du proton phénolique durant l'oxydation du ligand rend son deuxième site azote plus acide et seulement la déprotonation de ce dernier bascule l’équilibre réactionnel complétement vers l'oxydation du ligand. La deuxième partie de cette thèse consiste en la synthèse d’un complexe chromophore-tryptophane en utilisant une approche de chimie dite « click ». On a montré que l'oxydation, induite par la lumière, du Trp au sein du complexe Ru-tryptophane suit un mécanisme ETPT. Selon le pH, les radicaux du tryptophane (Trp• ou TrpH•⁺) ont été détectés et les mesures spectrales à différents temps ont montrés la transition entre les deux formes radicalaires. La déprotonation du radical dépend de la concentration d'eau assurant la fonction d’accepteur de proton. La dernière partie de la thèse concerne nos efforts à lier, par une liaison covalente, une unité catalytique au module de chromophore- relais électronique caractérisé précédemment. L'approche de chimie « click » n’était pas efficace pour l’obtention de l’assemblage photocatalytique final. Donc, l'activation biomoléculaire d'un catalyseur Mn salen a été effectuée et la formation de l’espèce Mn(IV) a été observée. Etant une étape vers l'utilisation de ces types de photocatalyseurs dans une cellule photoélectrochimique, un chromophore [Ru(bpy)₃]²⁺ avec des groupes d’ancrage phosphonate a été synthétisé (Ru-phosphonate) et greffé sur la surface méso-poreuses d'un semi-conducteur de TiO₂ pour effectuer des mesures du photocourant. / Artificial photosynthesis is often considered to have great potential to provide alternative, renewable fuels by harvesting, conversion and storage of solar energy. One promising approach is the development of modular molecular photocatalysts inspired by natural photosynthetic enzymes. The first part of this thesis deals with artificial mimics of the water oxidizing photosystem II composed of a chromophore and an electron relay as synthetic counterpart of the P680-TyrZ/His190 ensemble of photosystem II. Three ruthenium polypyridyl – imidazole - phenol complexes with varying position of a methyl group on the phenol ring (Ru-xMe) were synthesized and characterized by electrochemical and photophysical methods. As an improvement compared to earlier complexes the increased redox potential (~0.9 V vs. Ferrocene) of the phenol groups makes their function as an electron relay in a photocatalytic system for water oxidation thermodynamically possible. Time-resolved absorption studies revealed fast intramolecular electron transfer (<5-10 µs in aprotic solvent and <100 ns in water) despite the low driving force and the importance of the hydrogen bond between the phenol and the imidazole group was put in evidence. Slight differences between the three Ru-xMe complexes and investigation of the effect of external bases allowed to derive a mechanistic picture in which the imidazole is involved in a “proton domino” reaction. Accepting the phenolic proton upon ligand oxidation (within the H-bond) renders its second nitrogen site more acidic and only deprotonation of this site pulls the overall equilibrium completely towards oxidation of the ligand. Another part of this thesis comprises a chromophore-tryptophan construct synthesized using a click chemistry approach. Light-induced oxidation of Trp in this Ru-tryptophan complex was shown to follow ETPT mechanism. Depending on the pH conditions tryptophan radicals, either Trp• or TrpH•⁺ were detected and spectral measurement at different time showed the transition between the two forms. Deprotonation of the radical was dependent on the concentration of water as proton acceptor. Later part of the thesis deals with efforts to covalently bind a catalytic unit to the previously characterized chromophore-electron relay module. The click chemistry approach was not successful to obtain the final photocatalytic assembly. Therefore bimolecular activation of a Mn salen catalyst was performed and formation of Mn(IV) species was observed. As a step towards utilization of these types of photocatalysts in a photoelectrochemical cell a [Ru(bpy)₃]²⁺ chromophore with phosphonate anchoring groups (Ru-Phosphonate) was synthesized and grafted on the surface of a TiO₂ mesoporous semiconductor surface anode to perform photocurrent measurements.

Die vorliegende Arbeit beschreibt die Synthese Ferrocenyl-funktionalisierter Phosphole und deren elektrochemische sowie spektroelektrochemische Charakterisierung zur Bestimmung der Stärke der Metall-Metall-Wechselwirkungen. Aufgrund der mangelnden Aromatizität stehen das freie Elektronenpaar am Phosphoratom und das dienische System für weitere Reaktionen zur Verfügung. Somit konnten gezielt Modifikationen am heterozyklischen Grundgerüst vorgenommen werden, um dessen elektronische Eigenschaften zu beeinflussen. Ein Schwerpunkt der Arbeit lag im Aufbau eines Phospholsystems mit Ferrocenyl-substituenten in 2- und 5-Position des Heterozyklus. Weiterhin wurden die Auswirkungen auf die elektronischen Eigenschaften des Moleküls nach chemischer Oxidation des Phosphoratoms von PIII zu PV mit Schwefel und Selen untersucht. Ein weiterer Schwerpunkt lag in der Synthese von Übergangsmetallkomplexen des 2,5-Diferrocenyl-1-phenyl-1H-phosphols, um den Einfluss des Phosphoratoms und des dienischen Systems auf die elektronische Wechselwirkung der Ferrocenylgruppen genauer zu untersuchen und die elektronischen Eigenschaften gezielt zu beeinflussen. In weiteren Arbeiten wurden räumlich anspruchsvolle Substituenten am Phosphoratom zur Veränderung der Geometrie der pyramidalen Phosphorumgebung und somit zur Erhöhung der Delokalisierung im Heterozyklus eingeführt. Die Phosphole mit räumlich anspruchsvollen Gruppen zeigten die größte Metall-Metall-Wechselwirkung der Fc/Fc+-Gruppen über den Phospholring.

Selective gas-phase dissociation strategies have been developed for the characterization of cross-linked peptides and proteins in quadrupole ion trap mass spectrometers. An infrared chromogenic cross-linker (IRCX) containing a phosphotriester afforded rapid differentiation of cross-linked peptides from unmodified ones in proteolytic digests of cross-linked proteins by selective infrared multiphoton dissociation (IRMPD). Only the cross-linked peptides containing the chromogenic phosphate underwent IRMPD and unmodified peptides were not affected by IR irradiation. IRMPD of IRCX-cross-linked peptides yielded uncross-linked y-ion sequence tags of the constituent peptides due to secondary dissociation of all primary product ions which contained the chromophore, thus allowing successful de novo sequencing of the cross-linked peptides. Peptides cross-linked via a two-step conjugation strategy through the formation of a bis-arylhydrazone (BAH) bond were selectively dissociated by ultraviolet radiation at 355 nm. The BAH-cross-linked peptides could be distinguished from not only unmodified peptides but also dead-end modified peptides based on the selectivity of ultraviolet photodissociation. In a complementary approach, electron transfer dissociation of BAH-cross-linked peptides resulted in preferential cleavage of the hydrazone bond which produced two modified peptides. These modified peptides were subsequently interrogated by CID which allowed for the original site of cross-linking to be pinpointed. IRMPD was implemented in a dual pressure linear ion trap to demonstrate successful photodissociation of peptides having modest absorptivities. Peptides were observed to efficiently dissociation by IR irradiation exclusively in the low pressure cell whereas no dissociation was observed in the high pressure cell due to extensive collisional cooling. IRMPD provided greater sequence coverage of the peptides than CID and yielded product ion mass spectra which were predominantly composed of singly charged product ions which simplified spectral interpretation. IRMPD was further applied for the sequencing of small-interfering RNA. Complete sequence coverage was obtained and the results were compared to CID. / text

Caged compounds are a class of photosensitive reagents used to stimulate cells with spatial control down to a sub-cellular level, and millisecond temporal control. They comprise of biologically important molecule which is modified with a photolabile protecting group. In the absence of light, caged compounds are physiologically silent but irradiation with light induces the release of biologically active species. Illumination under two-photon conditions is particularly advantageous as it enables restriction of the photolysis volume to ~1 fL and it provides deeper penetration into scattering samples. This thesis reports the development of new protecting groups for two-photon uncaging in neuroscience. Mechanistically, the deprotection in these novel groups is designed to operate via an intramolecular photoinduced electron transfer (PeT) between the absorbing unit (electron-donor) and the release module (electron-acceptor). The modular design of these cages ensures separation of absorption and release steps, and allows each process to be tuned and optimized independently. Chapter 1 provides an introduction to the two-photon absorption phenomenon and a historic overview of the uncaging technique. It also discusses recent advances in the development of two-photon sensitive probes used in neuroscience. Chapter 2 describes the exploration of molecular designs for novel protecting groups. A two-photon absorbing dye (electron-donor; fluorene dye) and three different release units (electron-acceptors; nitrobenzyl, pyridinium and phenacyl) were identified as suitable building blocks for the current project. Efficiency of the intramolecular electron transfer between chosen units was evaluated using model dyads which constitute covalently linked electron-donor and acceptor species. Chapter 3 is devoted to the synthesis and photophysical evaluation of nitrobenzyl-based protecting group. Chapter 4 describes the preparation of pyridinium-derived protecting group and demonstrates PeT-mediated release of tryptophan and GABA under one- and two-photon excitation. Hydrolytic instability of pyridinium esters is highlighted. Chapter 5 reports the synthesis, hydrolytic stability and one-photon uncaging efficiency of phenacyl-based derivatives. Chapter 6 discusses properties of developed caged compounds and compares them with other compounds reported in literature. It contains overall conclusions and outlook for the current project. Chapter 7 details the experimental procedures and the characterization of compounds synthesized during this work.

No description available.

Développer des méthodes efficaces pour mettre en forme les matériaux moléculaires magnétiques demeure un enjeu majeur et représente une étape essentielle en vue de possible applications. A cet égard, l’élaboration d’hybrides magnétiques présentant des propriétés de cristaux-liquides ou des systèmes solubles apparait comme une approche prometteuse. Ce travail de thèse a été axé sur la conception, la synthèse et la caractérisation de nouveaux hybrides basé sur des molécule-aimants (SMMs), des complexes à conversion de spin (SCO) et systèmes à transfert d'électrons (ET). Le chapitre I contient des informations générales et concepts théoriques sur ces trois classes de complexes magnétiques (SMM, SCO et ET) ainsi qu’un aperçu bibliographique sur les hybrides magnétiques connus. Le chapitre II est axé sur nos travaux de fonctionnalisation de molécules-aimants basés sur le complexe Mn12, en vue d’obtenir des phases cristaux-liquides. Dans le chapitre III, l’étude d’une série de complexes à conversion de spin de type Fe(II)-pyridylbenzohydrazone au sein de phases cristallines ou de phases molles est décrite. Le chapitre IV est dédié à l’étude de complexes tetra nucléaire a pont cyanure de type {Fe2M2} (M = Co2+, Ni2+),qui sont connus pour présenter des propriétés de transfert de charge ou SMM avec l’ion Co(II) etNi(II), respectivement. Dans ces trois chapitres expérimentaux, l’influence de la fonctionnalisation des ligands sur l’auto-organisation et les propriétés thermiques et magnétiques des matériaux résultants est discutée en détail. / Developing efficient methods to process molecular magnetic materials remains a considerable challenge and constitutes one of the critical steps toward possible applications. In this scope, the development magnetic hybrids featuring liquid crystal properties or improved solubility appears as a promising approach. This thesis work aimed to design, synthetize and characterize new hybridmaterials based on the single-molecule magnets (SMMs), spin crossover (SCO) and electrontransfer (ET) complexes. Chapter I contains general information and theoretical concepts on these three classes of magnetic complexes (SMMs, SCO and ET complexes), followed by a bibliographicsurvey on hybrid magnetic materials. Chapter II, rational is focused on the functionalization ofMn12-based SMM towards liquid crystalline phases. In Chapter III, a series of pyridylbenzohydrazone-based Fe(II) SCO complexes is investigated in both crystalline and soft matter phase. Chapter IV is dedicated to the study of cyanido-bridged {Fe2M2} molecular squares(M = Co(II), Ni(II)), which are known to exhibit SMM and thermally- or photo induced ET,respectively with Co(II) and Ni(II). In these three experimental chapters, the influence of ligand functionalization on self-organization, thermal and magnetic properties of the resulting materials is discussed in detail.

Diese Arbeit befasst sich mit der vibronischen Kopplung zweier angeregter Elektronenniveaus in Diphenylhexatrien (DPH) und mit der Rolle von Schwingungsmoden beim ultraschnellen photoinduzierten intramolekularen Elektronentransfer in Betain-30. Mit Hilfe von Pikosekunden-zeitaufgelöster Kohärenter Antistokes Ramanspektroskopie im angeregten Zustand des DPH haben wir zum ersten Mal das Auftreten zweier extrem frequenzverbreiterter Ramanlinien beobachtet, die gegenüber dem C=C Streckschwingungsbereich zu höheren Wellenzahlen verschoben sind. Beide Ramanlinien lassen sich mit Erhöhung der Lösungsmittelpolarisierbarkeit um mehr als 50 cm-1 in Richtung niedrigerer Frequenzen verschieben. Zur Erklärung des Sachverhalts werden zwei Modelle diskutiert: (i) die Existenz zweier Isomere im ersten angeregten Elektronenniveau des DPH und (ii) vibronische Kopplung der beiden Elektronenniveaus durch eine niederfrequente asymmetrische bu Schwingungsbewegung (pseudo-Jahn-Teller Effekt). Mit Hilfe von stationärer Ramanspektroskopie und insbesondere Messungen der Stokes- und anti-Stokes-Ramanspektren mit Pikosekunden-Zeitauflösung, die Beteiligung von Molekülschwingungen beim Elektronentransfer in Betain-30 wurde untersucht. Zum ersten Mal wurde eine modenspezifische Kinetik der Ramanaktiven Schwingungen nach Elektronen Rücktransfer in Betain-30 beobachtet. Die hochfrequenten Ramanaktiven Moden werden beim Elektronen Rücktransfer bevorzugt, was zu einer nicht-thermischen Besetzung der Schwingungen führt. Das ist zumindest qualitativ in Übereinstimmung mit Rechnungen die auf Fermi's Goldener Regel basieren. Eine Thermalisierung zwischen den beobachteten Ramanaktiven Moden stellt sich frühestens 10 ps nach Anregung ein. Die Thermalisierung in dem gesamten Molekül ist aber noch nicht beendet. / This thesis deals with vibronic coupling effects between two excited electronic singlet states in Diphenylhexatriene (DPH), and with the role of vibrational modes in photoinduced ultrafast electron transfer in Betaine-30. By using the picosecond time-resolved Coherent Antistokes Raman Spectroscopy method, it was possible to observe for the first time two very broad and unusual up-shifted vibrational frequencies in the excited singlet state of DPH, which have frequencies higher than frequency region of the C=C stretching mode. These two frequencies shift towards lower frequencies with increasing solvent polarizability. Two explanations have been discussed: (i) the simultaneous existence of two rotamers, where the two frequencies originate from "different molecules" and (ii) a model of vibronic coupling by an asymmetric low frequency bu-mode (pseudo-Jahn-Teller effect). By using the picosecond time-resolved anti-Stokes Raman spectroscopy method, we observed for the first time mode-specific excitation of vibrational modes after back-electron transfer in Betaine-30. In the primary event, high frequency Raman active modes are most effective in accepting energy, which leads to a non-thermal distribution of the relative populations of Raman active modes. This is qualitatively in accordance with predictions derived from Fermi's Golden Rule. Although energy transfer between the Raman active modes has been finished after about 10 to 15 ps, thermalization is not yet complete in the whole molecule.

Die Toluol-Dioxygenase von Pseudomonas putida F1 ist eine Rieske-Dioxygenase und besteht aus Reduktase-, Ferredoxin- und Oxygenase-Komponente. Sie katalysiert den ersten Schritt im aeroben Abbau von Toluol. Ein effizienter Elektronentransfer zur terminalen Oxygenase-Komponente - an der die Sauerstoffaktivierung und Umwandlung von Toluol zum cis-Toluol-Dihydrodiol stattfindet - setzt eine reibungslose Interaktion aller Komponenten voraus. Die Ergebnisse der Stopped-flow-Messungen in der reduktiven Halbreaktion zeigen, dass NADH die Reduktase mittels Hydridtransfer reduziert, wodurch ein stabiler Ladungstransfer-Komplex zwischen NAD+ und FADH- entsteht. In der oxidativen Halbreaktion wird dieser dann durch einen Elektronenakzeptor über das blaue Semichinon zum Chinon oxidiert. Dabei zeigt sich, dass der Ladungstransfer-Komplex die Reaktion der Reduktase mit Sauerstoff unterdrückt. Eine Erklärung hierfür liefert die Kristallstruktur des Ladungstransfer-Komplexes. Die Reaktion mit Sauerstoff wird dadurch unterdrückt, dass das NAD+ koplanar mit dem Isoalloxazinring ist und den reaktiven N5-C4a Teil des FADs schützt und zudem den Isoalloxazinring in eine planare, weniger sauerstoffempfindliche Konformation zwängt. Durch die Bildung des Reduktase-Ferredoxin-Komplexes wird ein effizienter Elektronentransfer folgendermaßen ermöglicht: a) das Ferredoxin bindet an die Reduktase aufgrund elektrostatischer Anziehung entgegengesetzter Oberflächenladungen beider Proteine, b) die hydrophobe Region, die die beiden Redoxzentren umgibt, fungiert als Ein- und Ausgang für Elektronen und c) die geringe Entfernung von 11.7 Å zwischen beiden Kofaktoren erlaubt einen schnellen Elektronentransfer. Die Ergebnisse dieser Arbeit zeigen, dass der Elektronentransfer zwischen Reduktase und Ferredoxin durch die Bildung eines stabilen Ladungstransfer- und Reduktase- Ferredoxin-Komplexes beeinflusst wird und dadurch das Problem einer ungewollten Reaktion mit Sauerstoff umgangen wird. / The toluene dioxygenase from Pseudomonas putida F1 is a three-component Rieske non-heme iron dioxygenase comprising of a reductase, ferredoxin and an oxygenase component. It catalyzes the initial step in the aerobic degradation of toluene to cis-toluene dihydrodiol. A smooth interaction between all three components needs to be ensured to efficiently transfer the electrons derived from NADH oxidation to the terminal oxygenase component where molecular oxygen is activated and used for the hydroxylation of toluene. The results of the kinetic studies of the reductive half reaction of reductase reveal that NADH reduces the reductase, resulting in the formation of a stable charge transfer complex between NAD+ and FADH-. Oxidation of the charge transfer complex by an electron acceptor proceeds via the neutral semiquinone to the quinone state of FAD. It is shown that the charge transfer complex suppresses the reaction of the reductase with dioxygen. An explanation for this change in reactivity can be deduced from the structure of the charge transfer complex. Its slower reaction with dioxygen results from NAD+ lying coplanar with the FAD shielding its reactive N5-C4a locus and the forced planarity of the isoalloxazine ring. The formation of the reductase-ferredoxin complex allows efficient electron transfer from reductase to ferredoxin because a) the oppositely charged interacting surfaces of both proteins facilitate the pre-orientation of the ferredoxin on the reductase, b) a hydrophobic region surrounding the two redox centers in the complex acts as an exit/entrance port for electrons and c) the short edge-to-edge distance between both cofactors of 11.7 Å guarantees a fast electron transfer. The results demonstrate that the electron transfer between reductase and ferredoxin is governed by the formation of a stable charge transfer and of a reductase-ferredoxin complex with which the problem of an unwanted side reaction with dioxygen is obviated.

Diese Dissertation leistet einen Beitrag zum Verständnis des Energie- und Elektronentransfers innerhalb von neuartigen supramolekularen Strukturen, die aus einem zentralen Phthalocyanin und zwei axial angekoppelten Porphyrinen bestehen. Zwei solcher Trimere, welche die koordinative Ankopplung von Porphyrinen über ein Silizium-Zentralatom des Phthalocyanins nutzen, wurden im Rahmen der Arbeit zum ersten Mal quantitativ bezüglich auftretender innermolekularer Transferprozesse charakterisiert. Ziel war die Beantwortung der Frage, ob diese Substanzklasse die wunschgemässe Vereinigung von Lichtsammlung und Ladungstrennung ermöglicht. Aus der Kombination der Messdaten, aufgenommen mit einer Vielzahl von Messverfahren, konnten für die beiden untersuchten Trimere in zwei unterschiedlich polaren Lösungsmitteln die Ratenkonstanten der Energie- und Ladungstransferkanäle ermittelt werden. In allen Fällen findet ein effizienter Ladungstransfer von den Porphyrinen zum Phthalocyanin und ein Lochtransfer vom Phthalocyanin zu einem der beiden Porphyrine statt. Dieses Ergebnis bestätigt die Erwartung, dass Lichtsammlung und Ladungstrennung in diesem Molekül vereint auftreten. Zusätzlich zu den beiden oben erwähnten Prozessen findet je nach Lösungmittelpolarität und Struktur der Porphyrine ein dem Energietransfer paralleler Elektronentransfer und ein Ladungsrücktransfer statt. Allerdings zerfällt der ladungsseparierte Zustand zu schnell, was eine praktische Nutzung der untersuchten Verbindungen in Solarzellen noch verhindert und ihre Weiterentwicklung erfordert. / This thesis contributes to the comprehension of energy and electron transfer within novel supra-molecular structures, denominated triads, consisting of a central phthalocyanine axially-coupled to two porphyrins. In the course of this thesis, two of the trimers, were quantitatively characterized regarding their intramolecular transfer processes. Both feature a dative bond between the porphyrins and the phthalocyanine via the central silicium atom of the latter. These investigations aimed at answering whether this class of compounds allows the desired combination of light harvesting and charge separation. The rate constants of both investigated trimers in two solvents with different polarity were determined by the combination of data from a variety of measurement methods. An efficient charge transfer from the porphyrins to the phthalocyanine and a hole transfer from the phthalocyanine to one of the porphyrins occurs in all investigated cases. This result confirms the prospect that light harvesting and charge separation can occur combined in one molecule. Depending on solvent polarity and the structure of the porphyrines, electron transfer parallel to the energy transfer and a charge back transfer takes place in addition to both above-mentioned processes. However, the charge-separated state of the investigated substances decays to fast, still preventing a practical utilization of these compounds in solar cells and necessitating further developments.

Complexos polipiridínicos de rutênio mononuclares vem sendo ativamente estudados como catalisadores da reação de oxidação de água a oxigênio, mas o complexo ativado dos catalisadores mais eficientes envolve a formação de um dímero, indicando a importância da estrutura binuclear para ativação dos mesmos. Assim, nesta tese propomos o estudo dos possíveis efeitos sinérgicos em complexos binucleares de rutênio polipiridinas angulares para ativação das espécies de alta valência do tipo RuV=O e RuIV=O. Assim, foram preparadas séries de complexos polipiridínicos de rutênio empregando os ligantes tridentados derivados de terpiridinas e bidentados tipo bipiridina na forma cloro complexos e aqua complexos mono e binucleares, capazes de atuar como precursores das espécies ativas de alta valência por meio de reações de transferência de elétrons acoplado a transferência de prótons (PCET). Os complexos [RuCl(bpy)(phtpy)](PF6), [Ru2Cl2(bpy)2(tpy2ph)](PF6)2 e [Ru2Cl2(Clphen)2(tpy2ph)](PF6)2 (phtpy= 4\'-fenil-2,2\':6\',2\'\'-terpiridina, bpy= 2,2´-bipiriridina, Clphen= 5-cloro-1,10-fenantrolina e tpy2ph= 1,3-bis(4\'-2,2\':6\',2\'\'-terpiridil)benzeno) e seus aqua complexos foram sintetizados e caracterizados por técnicas espectroscópicas e eletroquímicas. Os complexos [RuCl(bpy)phtpy](PF6), [Ru2Cl2(bpy)2(tpy2ph)](PF6)2 e [Ru2Cl2(Clphen)2(tpy2ph)](PF6)2 apresentam apenas reações de transferência de elétrons onde o estado de oxidação máximo do íon rutênio é 3+. Todavia, os respectivos aqua complexos [Ru(H2O)(bpy)(phtpy)](PF6)2, [Ru2(H2O)2(bpy)(tpy2ph)](PF6)4 e [Ru2(H2O)2(Clphen)2(tpy2ph)](PF6)4 podem ser oxidados de modo a gerar complexos de alta valência com íon rutênio nos estados de oxidação 4+ e 5+ via reação de transferência eletrônica acoplada a transferência de prótons (PCET). Os complexos de RuIV=O são gerados em potenciais relativamente baixos e não apresentaram atividade eletrocatalítica significativa, enquanto que as espécies RuV=O ([RuV(O)(bpy)(phtpy)]3+ e [Ru2V(O)2(bpy)2(tpy2ph)]6+) atuam como catalisadores eficientes para a reação de oxidação da água a oxigênio. Os valores de TOF para os complexos binuclear (0,97 s-1) é cerca de três vezes maior que para o complexo mononuclear (0,32 s-1), confirmando a presença de efeitos sinérgicos que aceleram a liberação de oxigênio no complexo binuclear. As propriedades eletrocatalíticas dos complexos polipiridínicos de rutênio de alta valência foram transferidos para a superfície de eletrodos via eletropolimerização redutiva do complexo [Ru2(H2O)2(Clphen)2(tpy2ph)](TfO)4. Neste caso foram observadas a geração eletroquímica de espécies contendo o íon rutênio nos estados de oxidação 2+, 4+ e 5+, enquanto que a espécie no estado 3+ aparentemente não é estável e sofre desproporcionamento. O eletrodo modificado preservou a alta atividade eletrocatalítica do aqua complexo binuclear para a reação de oxidação da água (TOF de 0,80 s-1) e também para a oxidação de álcool benzílico a benzaldeído, com kRuIV= 14,70 L·mol-1 s-1 demonstrando o elevado potencial do material para a oxidação de substratos orgânicos. / Mononuclear ruthenium polypyridyl complexes have been studied as catalysts of oxygen evolution in water oxidation reaction, but the activated complex of most efficient catalysts assume the formation of dimers indicating the importance of the binuclear structure for their activation. Thereby, in this thesis we propose the study of possible synergistic effects in binuclear ruthenium polypyridyl complexes in order to activate species with high valence as RuV=O and RuIV=O for multi-electronic catalytic oxidation reactions. For this purpose, it was prepared a series of ruthenium polyppyridyl complexes using tridentate ligands based in terpyridine and bidentate bipyridine generating binuclear chloride complexes and aqua complexes which are able to act as precursors of the respective high valence active species generated by proton coupled electron transfer (PCET) reactions. The [RuCl(bpy)(phtpy)](PF6) and [Ru2Cl2(bpy)2(tpy2ph)](PF6)2 complexes (phtpy= 4\'-phenyl-2,2\':6\',2\'\'-terpyridine, bpy= 2,2´-bipyridine and tpy2ph= 1,3-bis(4\'-2,2\':6\',2\'\'-terpyridin-4-yl)benzene) and their respective aqua complexes were synthetized and characterized by spectroscopic and electrochemical techniques. The chloro complexes [RuCl(bpy)(phtpy)](PF6), [Ru2Cl2(bpy)2(tpy2ph)](PF6)2 and [Ru2Cl2(Clphen)2(tpy2ph)](PF6)2 (Clphen= 5-Chloro-1,10-phenanthroline) show only electron transfer reactions where the maximum oxidation state of the ruthenium ion is 3+. However, the respective aqua complexes [Ru(H2O)(bpy)(phtpy)](PF6)2, [Ru2(H2O)2(bpy)2(tpy2ph)](PF6)4 and [Ru2(H2O)2(Clphen)2(tpy2ph)](PF6)4 can be oxidized further by proton coupled electron transfer (PCET), generating high valence complexes where the ruthenium oxidation state can be 4+ and 5+. Complexes of RuIV=O are generated in relatively low potentials and do not presented significant electrocatalytic activity for oxidation of water to dioxygen, whereas the RuV=O species ([RuV(O)(bpy)(phtpy)]3+ and [Ru2V(O)2(bpy)2(tpy2ph)]6+) showed to be efficient catalysts for the reaction of water oxidation. The values of TOF for the binuclear complexes (0,97 s-1) were about three times larger than for the mononuclear complex (0,32 s-1), confirming the presence of synergistic effects accelerating the formation and release of oxygen by the binuclear complex. The electrocatalytic properties of high valence ruthenium polypyridyl complexes were transferred to electrodes surface by reductive electropolymerization of the [Ru2(H2O)2(Clphen)2(tpy2ph)](TfO)4 complex. In this case the electrochemical generation of ruthenium 2+, 4+ and 5+ species were observed whereas the 3+ species was not stable and disproportionated. The modified electrodes preserved the high electrocatalytic activity of the binuclear aqua complexes for water oxidation reaction (TOF de 0,80 s-1), and also for oxidation of benzyl alcohol to benzaldehyde with kRuIV= 14,70 L mol-1 s-1 demonstrating the high catalytic efficiency for oxidation of organic substrates.