Ce travail a porté sur la caractérisation et la quantification en 3D de la répartition de charges de différents types (nanoparticules, nanotubes, etc.) dans des matrices polymères. Nous nous focalisons sur les techniques de tomographie en microscopie électronique. Une approche multiple en tomographie électronique a été réalisée : la tomographie en FIB/MEB (faisceau d’ions focalisé/microscope électronique à balayage), la tomographie en MEB et la tomographie en MET (microscope électronique en transmission). Les nanocomposites polymère sont généralement élaborés aux fins d’améliorer les propriétés physiques (mécanique, électrique, etc.) du matériau polymère constituant la matrice, grâce à une addition contrôlée de charges nanométriques. La caractérisation de tels matériaux, et l’établissement de corrélations précises entre la microstructure et les propriétés d’usage, requièrent une approche tri-dimensionnelle. En raison de la taille nanométrique des charges, la microscopie électronique est incontournable. Deux systèmes de nanocomposite polymère ont été étudiés par une approche multiple de tomographie électronique : P(BuA-stat-S)/MWNTs (copolymère statistique poly (styrène-co-acrylate de butyl) renforcé par des nanotubes de carbone multi-parois), et P(BuA-stat-MMA)/SiO2 (copolymère statistique poly(butyl acrylate-co-methyl methacrylate) renforcé par des nanoparticules de silice). Par combinaison de divers techniques, la caractérisation et la quantification des nanocharges ont été possibles. En particulier, la taille, la fraction volumique et la distribution des charges ont été mesurées. Cette étude a ainsi fourni des informations en 3D qui contribuent à mieux comprendre les propriétés des nanocomposites. Une attention particulière a été portée aux artefacts et causes d’erreur possibles durant l’étape de traitement 3D. Nous avons également essayé de comparer les différentes techniques utilisées du point de vue de leurs avantages et inconvénients respectifs, en dégageant des possibilités d’amélioration future. / This work is focused on the characterization and quantification of the 3D distribution of different types of fillers (nanoparticles, nanotubes, etc.) in polymer matrices. We have essentially used tomography techniques in electron microscopy. Multiple approaches to electron tomography were performed: FIB-SEM (focused ion beam/scanning electron microscope) tomography, SEM tomography and TEM (transmission electron microscope) tomography. Polymer nanocomposites are basically synthesized in order to improve the physical properties (mechanical, electric, etc.) of the pure polymer constituting the matrix, by a controlled addition of fillers at the nanoscale. The characterization of such materials and the establishment of accurate correlations between the microstructure and the modified properties require a three-dimensional approach. According to the nanometric size of the fillers, electron microscopy techniques are needed. Two systems of polymer nanocomposites have been studied by multiple electron tomography approaches: P(BuA-stat-S)/MWNTs (statistical copolymer poly(styrene-co-butyl acrylate) reinforced by multi-walled carbon nanotubes) and P(BuA-stat-MMA)/SiO2 (statistical copolymer poly(butyl acrylate-co-methyl methacrylate) reinforced by silica nanoparticles). By combining various techniques, the characterization and the quantification of nanofillers were possible. In particular, statistics about size, distribution and volume fraction of the fillers were measured. This study has then provided 3D information, which contributes to a better understanding of properties of the nanocomposites. Attention has been paid to analyze carefully original data, and artifacts and causes of errors or inaccuracy were considered in the 3D treatments. We also attempted to compare benefits and drawbacks of all techniques employed in this study, and perspectives for future improvements have been proposed.

Ce travail s'inscrit dans le cadre du développement de matériaux composites nanostructurés à propriétés électriques et magnétiques inédites. Afin de répondre à des besoins technologiques pour, l'électronique de puissance intégrée : le stockage ou la transmission de l'énergie, les télécommunications (antenne intégrée...), le stockage de l'information par enregistrement magnétique et le marquage biologique, le composite doit présenter globalement une polarisation magnétique élevée ainsi qu'un comportement isolant permettant de pousser les limites fréquentielles, minimiser les pertes dynamiques et découpler les grains entre eux. Les matériaux composites élaborés sont constitués d'une matrice d'accueil - magnétique (ferrite spinelle) ou non-magnétique (diélectrique = silice) - dans laquelle sont dispersées des particules métalliques (Fer-Nickel ou Cobalt). Ces matériaux sont novateurs dans la mesure où le matériau final peut bénéficier d'un couplage des propriétés magnétiques des deux phases constitutives. L'holographie électronique en transmission a mis en évidence une ocnfiguration de spins de type « vortex » dans les nanoparticules de Fe30Ni70. Les mesures holographiques ont été comparées au profil de l'aimantation, dans un vortex, modélisé par une approche micromagnétique. Des analyses physico-chimiques approfondies nous ont permis de confirmer les topologies visées : pour le composite métal-diélectrique, l'épaisseur de la couche d'enrobage a pu être contrôlée à l'échelle nanonométrique. Pour le composite métal-oxyde obtenu par croissance directe du ferrite sur la phase métallique, on a démontré une bonne dispersion des particules métalliques. Les propriétés magnétiques et structurales des différents composites, en poudre ou compactés par SPS (compactage-frittage flash), ont été caractérisées et discutées. Les propriétés fonctionnelles ont été aussi étudiées et sont très prometteuses pour les applications visées. L'enrobage des nanoparticules par la silice a permis la préparation de leur surface dans la perspective d'une fonctionnalisation par des entités biologiques.

Atmospheric fine particulate matter (PM2.5), which is mostly formed in the atmosphere from precursor gases, contributes to numerous environmental and health concerns. Quantifying the ambient concentrations of PM2.5 and precursor gases can be challenging. Hence, many scientific questions about the formation, chemical composition, and gas/particle partitioning of PM2.5 remain unanswered. Ambient Ion Monitor - Ion Chromatography (AIM-IC) was characterized and utilized to measure the water-soluble composition of PM2.5 (dominated by pNH4+, pSO42-, and pNO3-) and associated precursor gases (dominated by NH3(g), SO2(g), and HNO3(g)) during two field campaigns. The AIM-IC detection limits for hourly sampling were determined to be 3 - 45 ng m-3. The response time for “sticky” gases was significantly improved with a nylon denuder membrane. A novel inlet configuration for the AIM-IC, which minimizes sampling inlet losses and carryover in sample analyses, was implemented. Measurements from the BAQS-Met 2007 campaign were utilized to assess the accuracy of the AURAMS model and investigate gas/particle partitioning in SW Ontario. Due to high sulphate levels, NH3(g) was the limiting chemical factor in the formation and gas/particle partitioning of PM2.5. The errors in the predictions of relative humidity and free ammonia were responsible for the poor agreement iii between modelled and measured pNO3- values. The AIM-IC measurements from the CalNex 2010 study were compared to the CMAQ model and utilized to investigate the gas/particle partitioning in Bakersfield, CA. Very high NH3(g) concentrations were observed, and the formation and partitioning of PM2.5 was limited by HNO3(g) and H2SO4. Evidence of rapid removal of HNO3(g) by interactions with super-micron dust particles, and possibly with the alkaline surface was found. CMAQ exhibited significant biases in the predicted concentrations of pSO42-, NH3(g) and HNO3(g).

Atmospheric fine particulate matter (PM2.5), which is mostly formed in the atmosphere from precursor gases, contributes to numerous environmental and health concerns. Quantifying the ambient concentrations of PM2.5 and precursor gases can be challenging. Hence, many scientific questions about the formation, chemical composition, and gas/particle partitioning of PM2.5 remain unanswered. Ambient Ion Monitor - Ion Chromatography (AIM-IC) was characterized and utilized to measure the water-soluble composition of PM2.5 (dominated by pNH4+, pSO42-, and pNO3-) and associated precursor gases (dominated by NH3(g), SO2(g), and HNO3(g)) during two field campaigns. The AIM-IC detection limits for hourly sampling were determined to be 3 - 45 ng m-3. The response time for “sticky” gases was significantly improved with a nylon denuder membrane. A novel inlet configuration for the AIM-IC, which minimizes sampling inlet losses and carryover in sample analyses, was implemented. Measurements from the BAQS-Met 2007 campaign were utilized to assess the accuracy of the AURAMS model and investigate gas/particle partitioning in SW Ontario. Due to high sulphate levels, NH3(g) was the limiting chemical factor in the formation and gas/particle partitioning of PM2.5. The errors in the predictions of relative humidity and free ammonia were responsible for the poor agreement iii between modelled and measured pNO3- values. The AIM-IC measurements from the CalNex 2010 study were compared to the CMAQ model and utilized to investigate the gas/particle partitioning in Bakersfield, CA. Very high NH3(g) concentrations were observed, and the formation and partitioning of PM2.5 was limited by HNO3(g) and H2SO4. Evidence of rapid removal of HNO3(g) by interactions with super-micron dust particles, and possibly with the alkaline surface was found. CMAQ exhibited significant biases in the predicted concentrations of pSO42-, NH3(g) and HNO3(g).

Since the Internet became available for commercial use in the early 90s, the way of doing business was changed forever. The Internet and electronic commerce have allowed people to carry out business by means of electronic communications, which makes it possible for them to do business and to conclude contracts with people situated within foreign jurisdictions. The need for consumer protection in electronic commerce has become necessary because of the misuse of aspects peculiar to electronic–commerce. Consumers have been cautious to make use of electroniccommerce, as they are uncertain about the consequences that their actions might have. Consumers will only utilise e–commerce if they have confidence in the legal system regulating it; therefore, legislation was needed to regulate their e–commerce activities. In 2002, the Electronic Communications and Transactions Act, 2002 was introduced into South African law as the first piece of legislation that would deal exclusively with electronic communications. Chapter VII of this particular act deals exclusively with consumer protection and seeks to remove certain uncertainties imposed by e–commerce. This is done by providing the South African consumer with statutory rights and obligations when engaging in electronic communications. The Consumer Protection Act, 68 of 2008 is the most recent piece of legislation that aims to promote a consistent legislative and enforcement framework relating to consumer transactions and agreements. South African legislation dealing with electronic commerce is relatively recent, and it is uncertain whether consumers are offered sufficient protection when they conclude contracts with suppliers or sellers from a foreign jurisdiction, that is, one that is situated outside South Africa. After looking at the protection mechanisms in place for South African consumers engaging in e–commerce, we have seen that there are certain problems that one might experience when trying to determine the applicability of some of the consumer protection measures to international electronic contracts. Most of the problems that we have identified are practical of nature. Consumers may, for instance, find it hard to execute their rights against foreign suppliers in a South African court, even if the court has jurisdiction to adjudicate the matter. Another problem that we identified is that some of the important terms in our legislation are too vaguely defined. Vague terms and definitions can lead to legal uncertainty, as consumers might find it hard to understand the ambit of the acts, and to determine the applicability thereof on their transactions. In order to look for possible solutions for South Africa, the author referred to the legal position with regards to consumer protections in the United Kingdom, and saw the important role that European Union legislation plays when determining the legal position regarding consumer protection in the UK. The legislation in the UK dealing with consumer protection is far more specific than the South African legislation dealing with same. There is definitely consumer protection legislation in place in South Africa but the ongoing technological changes in the electronic commerce milieu make it necessary for our legislators to review consumer protection legislation on a regular basis to ensure that it offers sufficient protection for South African consumers engaging in international electronic contracts. / Thesis (LL.M. (Import and Export Law))--North-West University, Potchefstroom Campus, 2012.

Since the Internet became available for commercial use in the early 90s, the way of doing business was changed forever. The Internet and electronic commerce have allowed people to carry out business by means of electronic communications, which makes it possible for them to do business and to conclude contracts with people situated within foreign jurisdictions. The need for consumer protection in electronic commerce has become necessary because of the misuse of aspects peculiar to electronic–commerce. Consumers have been cautious to make use of electroniccommerce, as they are uncertain about the consequences that their actions might have. Consumers will only utilise e–commerce if they have confidence in the legal system regulating it; therefore, legislation was needed to regulate their e–commerce activities. In 2002, the Electronic Communications and Transactions Act, 2002 was introduced into South African law as the first piece of legislation that would deal exclusively with electronic communications. Chapter VII of this particular act deals exclusively with consumer protection and seeks to remove certain uncertainties imposed by e–commerce. This is done by providing the South African consumer with statutory rights and obligations when engaging in electronic communications. The Consumer Protection Act, 68 of 2008 is the most recent piece of legislation that aims to promote a consistent legislative and enforcement framework relating to consumer transactions and agreements. South African legislation dealing with electronic commerce is relatively recent, and it is uncertain whether consumers are offered sufficient protection when they conclude contracts with suppliers or sellers from a foreign jurisdiction, that is, one that is situated outside South Africa. After looking at the protection mechanisms in place for South African consumers engaging in e–commerce, we have seen that there are certain problems that one might experience when trying to determine the applicability of some of the consumer protection measures to international electronic contracts. Most of the problems that we have identified are practical of nature. Consumers may, for instance, find it hard to execute their rights against foreign suppliers in a South African court, even if the court has jurisdiction to adjudicate the matter. Another problem that we identified is that some of the important terms in our legislation are too vaguely defined. Vague terms and definitions can lead to legal uncertainty, as consumers might find it hard to understand the ambit of the acts, and to determine the applicability thereof on their transactions. In order to look for possible solutions for South Africa, the author referred to the legal position with regards to consumer protections in the United Kingdom, and saw the important role that European Union legislation plays when determining the legal position regarding consumer protection in the UK. The legislation in the UK dealing with consumer protection is far more specific than the South African legislation dealing with same. There is definitely consumer protection legislation in place in South Africa but the ongoing technological changes in the electronic commerce milieu make it necessary for our legislators to review consumer protection legislation on a regular basis to ensure that it offers sufficient protection for South African consumers engaging in international electronic contracts. / Thesis (LL.M. (Import and Export Law))--North-West University, Potchefstroom Campus, 2012.

Les oxydes à base de Cérium, ont fait l’objet de nombreuses études ces dernières décennies et se sont révélés des matériaux de choix, dans le domaine de la catalyse hétérogène. L’objectif à l’heure actuelle, est donc d’accroître la réactivité de ces oxydes, tout en élargissant leur gamme de températures optimales d’utilisation. Dans ce contexte particulier, il semble possible de moduler les propriétés des oxydes à base de cérium en contrôlant la morphologie des cristallites. Ce travail de thèse a donc été consacré à la détermination, l’élaboration et à la caractérisation de matériaux oxydes à base de cérium de morphologies contrôlées. Nous avons tout d’abord déterminé cristallographiquement et thermodynamiquement les morphologies accessibles au système étudié puis par traitement hydrothermale assistée par chauffage micro-ondes nous avons synthétisé les dites morphologies. Après caractérisation de la réactivité par ATG et thermographie Infrarouge nous avons optimisé ces matériaux par un dopage extrinsèque tout d’abord (dépôt de métaux précieux), puis par un dopage intrinsèque ensuite (Yttrium et Fer). Enfin, l’obtention de morphologies non accessibles cristallographiquement nous a amené à approfondir le(s) processus de germination croissance de ces particules et la forte réactivité des matériaux dopés fer nous a poussé à une caractérisation fine de la microstructure de ces matériaux. Au final nous avons pu corréler l’influence de la morphologie des cristallites sur la réactivité propre de l’ensemble des familles de matériaux étudiés. / Recent decades, numerous studies on cerium-based oxides have been realized and have revealed that cerium-based oxides were materials of choice in the field of heterogeneous catalysis. The aim now is therefore to increase the reactivity of these oxides, while expanding their range of optimal temperatures of Use. In this particular context, it seems possible to modulate the properties of cerium-based oxides by controlling the morphology of the crystallites. This thesis has been devoted to the identification, development and characterization of materials based on cerium oxides of controlled morphology. We first determined possible morphologies for the studied system, by hydrothermal synthesis by micro-wave assisted heating we have synthesized these morphologies and we characterized reactivity of these materials by infrared thermography and TGA. We have optimized these materials first, by extrinsic doping (deposition of precious metals) and then by intrinsic doping (Yttrium and Iron). New morphologies have been synthesized so we have studied the processes of nucleation-growth set in. The high reactivity of iron-doped materials has led us to a detailed characterization of the microstructure of these materials. Finally correlation reactivity/morphologies of crystallites have been achieved.

Those who take the Great Commission of Christ seriously realise that enlarging today's mission force is crucial. The Two-thirds World church is in a prime position to meet the need. Cross-cultural mission training would greatly enhance and accelerate the fulfilling of Christ's final mandate to the Church. As founding director of Missions Exposure and Training (MET), a Christian ministry located in Pretoria, South Africa, the author of the thesis lays out the details of the programme for the reader. MET is the case study being considered, with particular emphasis placed on Missionary Candidate School (MCS), the backbone of MET. Before MET is introduced, the thesis begins with the challenge facing the universal Church today: the need to strengthen and enlarge the current mission force. The theological implications of Jesus Christ's mandate to the Church, the missionary purpose of the Church, as well as eschatological concerns build a strong argument for the need of a larger mission force. Demographic changes taking place within the Church mean that Two-thirds World Christians should be considered as a primary resource for cross-cultural mission endeavours. To maximise the potential of the new recruits, which the writer refers to as 'missionary candidates,' further discussion is given for the need of systematic training and equipping of Two-thirds World missionaries. After describing MET and MCS, the programme is critically evaluated. MCS is proven to be effective in training African men and women for intercultural Christian mission service, and as such it becomes a model worth investigating. The clear findings that result from the candid evaluation, and assessments made in light of current theological and missiological issues, should prove to be beneficial to those developing programmes with the purpose of training and equipping Two-thirds World missionaries. / Christian Spirituality, Church History and Missiology / D. Th. (Missiology)

Les aciers inoxydables austénitiques métastables sont le siège de différents mécanismes de déformation qui sont à l'origine des propriétés mécaniques qui distinguent ce type d’alliages. Cependant, ces dernières, dépendant de la microstructure locale, sont fortement anisotropes. Par ailleurs, la déformation d'un échantillon massif serait différente de celle obtenue en surface. De ce fait, une étude détaillée trouve tout son intérêt. Le présent travail vise donc à identifier les principaux mécanismes de déformation et de leur évolution progressive, en se basant sur une déformation contrôlée de grains austénitiques individuels par des tests mécaniques de nanoindentation monotoniques et cycliques. Les courbes correspondantes au chargement-déchargement révèlent des informations détaillées sur les propriétés mécaniques sous-jacentes qui pourraient être liées à une étude complète de la structure de déformation en surface et en volume par différentes techniques de caractérisation à une échelle très fine. La déformation en fonction du temps, les phénomènes de transformation de phase réversible sous charge, l'anisotropie cristalline, l'influences de la taille des grains, la transmission de la plasticité et la tenue en fatigue ont été mis en évidence et étudiés / Metastable austenitic stainless steels feature an abundance of different deformation mechanisms, which contribute to the distinguished mechanical properties of these alloys. However, these properties are known to depend on the local microstructure and also are highly anisotropic. Furthermore, deformation is expected to be different for the bulk and the surface of a sample. In this sense, a discrete study is not trivial. The present work aims at investigation of the main deformation mechanisms and their gradual evolution, by employing controlled deformation of individual austenite grains via monotonic and cyclic nanoindentation. The corresponding loading–unloading curves have given extensive information about underlying mechanical properties, which could be related to an exhaustive reconstruction of the deformation substructure, both in surface and bulk, by different small scale characterization techniques. Amongst others, features such as time-dependent deformation, reversible phase transformation under load, crystalline anisotropy and grain size influences, besides plasticity transmission and fatigue behavior have been found and analyzed

Dans la perspective d’améliorer les cellules du futur, nous avons élaboré respectivement des couches minces de ZnO dopé Mo par la méthode spray pyrolyse et dopé Yb par sputtering. Quel que soit la technique utilisée, toutes ces couches sont polycristallines, transparentes avec des surfaces uniformes. De plus les mesures d’effet Hall montrent une conductivité de type n dans le cas des deux systèmes étudiés. Concernant les films minces de ZnO dopé Mo, les propriétés électriques restent potentiellement intéressantes pour des applications en photovoltaïque en tant que dopant additionnel en plus des terres rares. Quant aux films minces de ZnOYb, les résultats de mesures PL ont clairement mis en évidence un couplage optique entre ZnO et l’Yb avec l’observation d’un photon infrarouge pour un photon UV incident. Ceci suggère que le concept « down-shift » est susceptible d’être validé. / In view of improving the cells of the future, we have elaborated respectively doped ZnO thin films by Mo spray pyrolysis method and doped Yb by sputtering. Whatever the technique used all these layers are polycrystalline, transparent with smooth surfaces. In addition, the Hall effect measurements show an n-type conductivity in the case of two systems studied. On thin films of ZnO doped Mo, the electrical properties are potentially interesting for photovoltaic applications as additional dopant in addition to rare earths. As for thin films ZnOYb, PL measurement results have clearly demonstrated an optical coupling between ZnO and Yb with the observation of a photon infrared photon UV incident. This suggests that the concept of "down-shift" is likely to be validated.