Diploma thesis Power of the First Generations of the Ronov Noble Family and Their Position Within Czech Mediaeval Society was dealing with the position and power of the first three generations of the representatives of Ronov noblemen in the direct line towards Hynek from Dubá. In the prosopographical part of the thesis the lines of testimony were analysed and these proved clearly that the maximum of their court career was occurring during the reign of Wenceslaus the First. This maximum is also reflected in the other part of the thesis - which is the analysis of possession- holding. At the age of Wenceslaus the First Ronov noblemen built up a vast area of their particular possessions in Northern Bohemia and gradually they were developing colonisation of this region. Even though Ronov noble family did not take up any posts at the court, the exception is the position of Budysin administrator, they created a very tight connection to Premyslid kings due to the common childhood with Wenceslaus the First and they also supported him politically and also militarily in his inner and foreign policy. After the death of Castoslov from Zitava the position of power in the direct family line began to deteriorate, the peak of power was now for Lichtenburg family. The minimum of the court career comes after their left the...

Le secteur aéronautique connaît un important essor depuis les années 1960, avec pour conséquence l’augmentation majeure des températures de fonctionnement des turbines. L’utilisation de capteurs, au plus proche de la chambre de combustion, est nécessaire pour maîtriser les performances des turboréacteurs. Cela justifie le besoin industriel de développer des assemblages céramique-métal résistants à un environnement sévère (>1100°C sous air, vibrations, etc.)L’alumine est sélectionnée en raison de son caractère isolant à haute température. La principale difficulté réside dans le choix du substrat métallique, qui doit être à la fois : réfractaire, résistant à l’oxydation, pour un coût abordable. Le potentiel d’un carbure ternaire (de type phase MAX) est évalué en tant que substrat métallique. La composition des brasures est ajustée pour chaque système afin de garantir : une tenue en température, une excellente ductilité et une compatibilité métallurgique vis-à-vis du substrat métallique.Des brasures ternaires Au-Pd-Pt sont formulées et élaborées. Les contours de solidus et de liquidus de ce ternaire sont déterminés expérimentalement. Les mécanismes de diffusion, de dissolution ou encore de pénétration inter-granulaire, à l’interface métal/brasure, sont décrits afin d’apporter des améliorations aux systèmes développés. Au cours du brasage, la diffusion de l’aluminium des substrats alumino-formeurs vers la brasure est prédominante, malgré la mise en place d’une barrière de diffusion. Le recours à des substrats métalliques nobles s’avère incontournable.Les paramètres géométriques et chimiques de l’assemblage sont établis pour chaque nouveau système étudié sur la base des processus physico-chimiques survenant au cours du brasage et du vieillissement sous air. Les meilleurs assemblages développés présentent une excellente herméticité après brasage. Les essais de vieillissement en cyclage thermique, dans des conditions sévères, sollicitent fortement la liaison céramique-brasure jusqu’à la rupture interfaciale. Deux voies d’améliorations sont proposées pour assurer la durabilité de la liaison céramique-brasure au cours du cyclage thermique. / Aerospace technology developments are blooming. Since the 1960’s the Turbine Entry Temperature for aero-engines gas turbines keeps rising to improve their efficiency. Sensors working close to the combustion chamber are required in order to master the turbine performances. This results in an industrial urge to develop ceramic-to-metal assemblies able to endure severe engine environment (>1100°C under air, vibrations, etc.)The choice of an alumina as the ceramic part ensures a good insulation at high temperature. The main issue remains the metallic material which must be refractory, resistant to oxidation and affordable. The application of a ternary carbide (phase MAX) is tested. The braze alloy composition is adjusted to each system so as to provide a good ductility, thermal stability and a metallurgical matching as regards dissolution and brittle compounds formation.Braze alloys based on the Au-Pd-Pt system are investigated. The aforesaid liquidus and solidus surfaces are defined from experimental measures. Diffusion, dissolution and inter-granular penetration at the metal/braze alloy interface are described to suggest improvements. Aluminum diffusion from alumina-forming materials towards the braze alloy is the dominant phenomenon during brazing, despite the use of a diffusion barrier. The use of noble materials for the metallic substrate is mandatory.Geometrical and chemical assembly parameters are defined for selected brazed system based on the physicochemical interactions occurring during brazing and aging under air. The best brazed assemblies present an excellent hermeticity after brazing. Thermal cycling aging in severe conditions is detrimental to ceramic-braze alloy bonding, leading to interfacial cracks. Two promising strategies are suggested to ensure a reliable ceramic-to-braze alloy bonding during thermal cycling.

The purpose of diploma work is formulate typology of nobleman in polish literary at 17 - 19 centuries. The theoretical part will include closer look on creativity of chosen authors and theirs works will be set into historical-literary context (for example notion sarmatism, noble culture in era of Romanism etc.). Analysis section will notice on mutual parallel and also on particular specific of each authors respectively on theirs texts if is it conception of noble character. Author of this task will issue from 3 main texts: Memoirs who's author is J. Ch. Pasek, from Mickiewicz's Pan Tadeasz and from trilogy of Henryk Sienkiewicz. Main attention will be focused on characteristic of nobleman, his perception of the world and problems of noble morality.

Nesta tese de doutorado apresentamos os resultados de quatro tópicos referentes a estudos de propriedades elétricas que são interpretados com o auxílio da Teoria Quântica de Átomos em Moléculas (QTAIM). No primeiro deles, foram calculados momentos de dipolo e suas derivadas através de um novo formalismo de divisão de átomos em moléculas, baseado em campos de forças de Ehrenfest (CFE), sendo que estes dados são comparados com aqueles advindos da QTAIM. Desta forma, um modelo alternativo de partição em carga - fluxo de carga - fluxo de dipolo (CFCFD) é discutido para derivadas do momento dipolar. Os resultados gerais obtidos pelo formalismo CFE foram satisfatórios em termos quantitativos, embora QTAIM ainda fornece uma descrição mais apropriada destes fenômenos das polarizações atômicas e de suas variações durante vibrações. Na sequência, investigamos os Atratores Não Nucleares (NNAs), que são identificados através de uma análise QTAIM da densidade eletrônica. O nosso intuito foi descobrir novas moléculas que apresentam essa peculiaridade, bem como encontrar padrões entre os casos encontrados que permitam contribuir para o entendimento dos fatores que levam ao seu aparecimento. Para isso trabalhamos com moléculas diatômicas homonucleares de elementos representativos com números atômicos que variavam de Z=1 até Z=38 e moléculas heteronucleares formadas pela combinação dos mesmos. Os nossos dados mostram que NNAs podem ser encontrados em alguns pontos dentro da faixa de distâncias internucleares investigada para quase todos os sistemas diatômicos homonucleares, exceto para as moléculas de Hidrogênio, Hélio e Estrôncio. Por sua vez, encontramos trinta casos de NNAs em sistemas heteronucleares, muitos dos quais ainda inéditos na literatura. Descobrimos também que a polarizabilidade atômica aparentemente tem um papel importante na explicação dos casos encontrados. Tratamos também de moléculas contendo interações fracas como as de Van der Waals (moléculas tri-atômicas contendo um gás nobre ligado a um composto diatômico iônico) de modo a investigar os valores de dipolos atômicos QTAIM de uma maneira mais direta, ou seja, via comparação com um modelo simples para estes compostos. Por fim, estudamos moléculas em estados excitados, sendo que nossa análise focou em dois casos peculiares (CO e de CF2N2) que apresentam momento de dipolo nulo no estado fundamental, enquanto valores significativos desta propriedade são observados em seus primeiros estados excitados. Desta forma, QTAIM foi fundamental para compreender como o processo de excitação pode levar à mudanças tão significativas em tais propriedades elétricas. / In this PhD thesis we present the results of four different topics that refer to a study of electric properties interpreted with The Quantum Theory of Atoms and Molecules (QTAIM). First, dipole moments and their derivatives were calculated from a new formalism based on Ehrenfest Force Fields (EFF) and a comparison with data from QTAIM is carried out. Therefore, the Charge-Charge Flux-Dipole Flux (CCFDF) model was discussed for the dipole moment derivatives. The results from EFF were satisfactory in quantitative terms although QTAIM still seems to be better for the description of atomic polarization and its variations during vibrations. In the sequence, we investigated the Non-Nuclear Attractors (NNAs) that could be identified with the QTAIM formalism. Our intention was to discover new molecules that present this peculiarity, as well as to find trends among these cases that allow contributing for the understanding of the factors that lead to their appearance. For this purpose, we selected homonuclear diatomic molecules of elements presenting atomic numbers ranging from Z=1 to Z=38 and heteronuclear diatomic molecules containing these same elements. Our data shows that NNAs could be found in almost every homonuclear molecule expect by the systems formed by Hydrogen, Helium, and Strontium. On other hand, we have found 30 cases of NNAs in heteronuclear molecules, many of them seen for the first time. We also have noticed that the atomic polarizabilities play a main role in the understanding of these cases. We also treated molecules containing weak Van der Waals interactions (triatomic complexes presenting a noble gas bonded to a diatomic ionic molecule) in order to investigate the atomic dipole values obtained with QTAIM in a direct way, that is, by means of a comparison using a simple model for this kind of bonding. Finally, we studied molecules in excited states. Our focus was in two peculiar cases (CO and CF2N2), which present null dipole moments in their ground states but exhibit significant dipole moment values in their first excited states. Therefore, QTAIM was fundamental to understand how the excitation process can lead to important changes in electric properties.

The aim of this study is to reveal how LBD adheres to postmodern tenets while also being ultimately suspicious of these principles. This suspicion of postmodern principles is reflected in the interaction between the main subject of the videos, Lizzie Bennet, and the audience. This examination invokes the questions of when, where, and how the audience experiences LBD. This illuminates the manner in which LBD functions as a postmodern literary text and how this text is critical of its digital composition. / Includes bibliography. / Thesis (M.A.)--Florida Atlantic University, 2014. / FAU Electronic Theses and Dissertations Collection

Le réchauffement climatique est lié aux augmentations des concentrations de gaz à effet de serre dans l'atmosphère terrestre et en particulier aux émissions anthropiques de CO₂. La séquestration géologique a la capacité et la longévité potentielles pour diminuer de façon significative les émissions anthropiques de CO₂. Cette séquestration à grande profondeur induit des risques de fuite des réservoirs géologiques. Parmi les scénarios de fuite envisagés, celui d'une fuite diffuse est le plus inquiétant puisque sans surveillance, cette fuite pourrait perdurer et entrainer des séquelles sur l'environnement ainsi que des risques pour les populations. Des outils et protocoles de surveillance doivent donc être mis au point pour la surveillance en proche surface. Ce travail de thèse s'inscrit dans le cadre de cette problématique. Il a pour objectif la caractérisation, la quantification et la modélisation du transport et des interactions du CO₂ dans une zone non saturée carbonatée. Ce travail a suivi une approche expérimentale sur un site pilote naturel à Saint-Emilion (Gironde, France), avec la réalisation de fuites diffuses en ZNS carbonatée. Cette étude aborde plusieurs thématiques: la description et l'instrumentation du site pilote naturel ; la caractérisation physico-chimique de l'hétérogénéité du réservoir carbonaté ; l'étude du fonctionnement naturel de la ZNS carbonatée et en particulier la mise en place d'une ligne de base des concentrations en CO₂ ; la caractérisation de l'extension des panaches de gaz suite à des expériences de fuite diffuse dans la ZNS carbonatée et l'étude par simulation numérique des interactions gaz-eau-roche lors d'une fuite diffuse de CO₂ dans une ZNS carbonatée. Les résultats de ces travaux montrent l'importance de la caractérisation de l'hétérogénéité du réservoir carbonaté ainsi que des techniques d'échantillonnage et d'analyse des différentes phases en présence. L'établissement de la ligne de base a une importance particulière pour permettre de distinguer les variations naturelles de celles induites par une fuite diffuse de CO₂ dans la ZNS carbonatée. Les modes de transport du CO₂ vont évoluer en fonction des paramètres physico-chimiques. Ce transport se fait par advection et/ou par diffusion. L'utilisation de gaz inertes au niveau du site de séquestration géologique est très importante puisque la détection de ces traceurs permettrait de prédire les arrivées de panaches de CO₂ en proche surface. Par ailleurs, les interactions chimiques doivent être prises en compte dans les modèles de transport afin de pouvoir définir les facteurs de retard et l'impact d'une fuite diffuse de CO₂ sur une ZNS carbonatée. / Global warming is related to atmospheric greenhouse gas concentration increase and especially anthropogenic CO₂ emissions. Geologic sequestration has the potential capacity and the longevity to significantly diminish anthropogenic CO₂ emissions. This sequestration in deep geological formation induces leakage risks from the geological reservoir. Several leakage scenarios have been imagined. Since it could continue for a long period, inducing environmental issues and risks for human, the scenario of a diffusive leakage is the most worrying. Thus, monitoring tools and protocols are needed to set up a near-surface monitoring plan. The present thesis deals with this problematic. The aims are the characterisation, the quantification and the modelling of transport and interactions of CO₂ in a carbonate unsaturated zone. This was achieved following an experimental approach on a natural pilot site in Saint-Emilion (Gironde, France), where diffusive gas leakage experiments were set up in a carbonate unsaturated zone. Different aspects were investigated during the study: natural pilot site description and instrumentation; the physical and chemical characterisation of carbonate reservoir heterogeneity; the natural functioning of the carbonate unsaturated zone and especially the set-up of a CO₂ concentrations baseline; the characterisation of gas plume extension following induced diffusive leakage in the carbonate unsaturated zone and the study of gas-water-rock interactions during a CO₂ diffusive leakage in a carbonate unsaturated zone through numerical simulations. The results show the importance of the carbonate reservoir heterogeneity characterisation as well as the sampling and analysing methods for the different phases. The baseline set-up is of main interest since it allows discrimination between the induced and the natural CO₂ concentrations variations. The transfer of CO₂ in a carbonate unsaturated zone is varying in function of physical and chemical properties. This transfer is done by diffusion and/or advection. Because the detection of the noble gases allows the prediction of CO₂ plume arrival, the use of tracers in the sequestration site is of main importance. The chemical interactions have to be taken under account in transport models in order to predict delay factors and the impact of a CO₂ leakage in a carbonate unsaturated zone.

This dissertation is a study of appetite in Plato’s Timaeus, Republic and Phaedrus. In recent research is it often suggested that Plato considers appetite (i) to pertain to the essential needs of the body, (ii) to relate to a distinct set of objects, e.g. food or drink, and (iii) to cause behaviour aiming at sensory pleasure. Exploring how the notion of appetite, directly and indirectly, connects with Plato’s other purposes in these dialogues, this dissertation sets out to evaluate these ideas. By asking, and answering, three philosophically and interpretatively crucial questions, individually linked to the arguments of the dialogues, this thesis aims to show (i) that the relationship between appetite and the body is not a matter of survival, and that appetite is better understood in terms of excess; (ii) that appetite is multiform and cannot be defined in terms of a distinct set of objects; and (iii) that appetite, in Plato, can also pertain to non-sensory objects, such as articulated discourse. Chapter one asks what the universe can teach us about embodied life. It argues that Plato, in the Timaeus, works with an important link between the universe and the soul, and that the account of disorder, irrationality and multiformity identifying a pre-cosmic condition of the universe provides a key to understanding the excessive behaviour and condition of a soul dominated by appetite. Chapter two asks why the philosophers of the Republic’s Kallipolis return to the cave, and suggests that Plato’s notion of the noble lie provides a reasonable account of this. By exploring the Republic’s ideas of education, poetry and tradition, it argues that appetite – a multiform and appearance oriented source of motivation – is an essential part of this account. Chapter three asks why Socrates characterizes the speeches of the Phaedrus as deceptive games. It proposes that this question should be understood in the light of two distinctions: one between playful and serious discourse and one between simple and multiform. It argues that the speeches of the Phaedrus are multiform games, and suggests that appetite is the primary source of motivation of the soul addressed, personified by Phaedrus.

In recent times, as regulations and legislations for exhaust treatment have become more stringent, a major concern in the arena of environmental catalysis is to find new efficient and economical exhaust treatment catalysts. Chapter 1 is a review of the current status of various NOx abatement techniques and understanding the role of “auto-exhaust catalysts” involved therein. Chapter 2 presents the studies on synthesis of ionically substituted precious metal ions like Pd2+, Pt2+ and Rh3+ in CeO2 matrix and their comparative three-way catalytic performances for NO reduction by CO, as well as CO and hydrocarbon oxidation. Ce0.98Pd0.02O2- showed better catalytic activity than ionically dispersed Pt or Rh in CeO2. The study in Chapter 3 aims at synthesizing 1 atom% Pd2+ ion in TiO2 in the form of Ti0.99Pd0.01O2- with oxide ion vacancy. A bi-functional reaction mechanism for CO oxidation by O2 and NO reduction by CO was proposed. For NO reduction in presence of CO, the model based on competitive adsorption of NO and CO on Pd2+, NO chemisorption and dissociation on oxide ion vacancy fits the experimental data. The rate parameters obtained from the model indicates that the reactions are much faster over this catalyst compared to other catalysts reported in the literature. In Chapter 4 we present catalytic reduction of NO by H2 over precious metal substituted TiO2 (Ti0.99M0.01O2-, where M = Ru, Rh, Pd, Pt) catalysts. The rate of NO reduction by H2 depends on the reducibility of the catalysts. Chapter 5 presents the studies on reduction of NO by NH3 in presence of excess oxygen. 10 atom % of first row transition metal ions (Ti0.9M0.1O2-, where M = Cr, Mn, Fe, Co and Cu) were substituted in anatase TiO2 and TPD study showed that the Lewis and Bronsted acid sites are adsorption sites for NH3, whereas NO is found to dissociatively chemisorbed in oxide ion vacancies. The mechanism of the low temperature catalytic activity of the SCR and the selectivity of the products were studied to understand the mechanism by studying the by-reactions like ammonia oxidation by oxygen. A new catalyst Ti0.9Mn0.05Fe0.05O2- has shown low temperature activity with a broad SCR window from 200 to 400 °C and more selectivity than commercial vanadium-oxides catalysts. We attempted NO dissociation by a photochemical route with remarkable success. In Chapter 6 we report room temperature photocatalytic activity of Ti0.99Pd0.01O2- for NO reduction and CO oxidation by creating redox adsorption sites and utilizing oxide ion vacancy in the catalyst. The reduction of NO is carried out both in the presence and in the absence of CO. Despite competitive adsorption of NO and CO on the Pd2+ sites, the rate of reduction of NO is two orders of magnitude higher than unsubstituted TiO2. High rates of photo-oxidation of CO with O2 over Ti0.99Pd0.01O2- were observed at room temperature. In Chapter 7 the results are summarized and critical issues are addressed. Novel idea in this thesis was to see if both noble metal ions and base metal ions substituted in TiO2 and CeO2 reducible supports can act as better active sites than the corresponding metal atoms in their zero valent state.

Among the various heterogeneous catalytic reactions three way catalysis (TWC), catalytic combustion of hydrogen, water gas shift reaction (WGS) and preferential oxidation of CO (PROX) in the hydrogen rich stream are some of the important reactions receiving the attention presently. Three-way catalysis (TWC) involves simultaneous removal of the three pollutants (i.e., CO, NOx, and HCs) from the automobile exhaust. Catalytic combustion of hydrogen by oxygen or hydrogen-oxygen recombination reaction is an industrially important reaction. It has variety of application such as in sealed lead acid batteries and nuclear reactors. Water gas shift (WGS) reaction is of specific importance to produce hydrogen from carbonaceous material. PROX is an important step to further purify hydrogen produced form WGS. Hydrogen purified using PROX can be directly fed to polymer electrolyte membrane fuel cells. By and large, noble metals Pt, Pd, Rh, Ru and some of their alloys are dispersed on oxide or high surface area carbon are the active catalysts. An alternative approach can be to make Pt2+, Pd2+, Rh3+, Ru4+ ions substituted in reducible support such as CeO2, Ce1-xTixO2-δ and TiO2 to increase the dispersion and bring down the cost. In this thesis we have followed this new approach and show that noble metal ionic catalysts are superior to noble metal nano particles. In the 1st chapter we present an overview of heterogeneous catalysis and important heterogeneous catalytic reactions. Monolithic catalyst and various ways to coat catalysts for application have been reviewed. Metal-support interaction till date is also reviewed. In the 2nd chapter, synthesis of noble metal ionic catalysts by solution combustion method is described. Coating of washcoat and active catalyst phase over ceramic honeycomb by a new combustion method is described. Solution combustion reaction and characterization of the catalyst by x-ray diffraction, x-ray photoelectron spectroscopy, temperature programmed reduction and reaction is given. We have fabricated experimental systems to carryout catalytic reaction and in this chapter they have been presented. In the 3rd chapter, we report a new process of coating of active exhaust catalyst over -Al2O3 coated cordierite honeycomb. The process consists of (a) growing  -Al2O3 on cordierite by solution combustion of Al(NO3)3 and oxylyldihydrazide (ODH) at 600 0C. Active catalyst phase, Ce0.98Pd0.02O2- is coated on - Al2O3 coated cordierite again by combustion of ceric ammonium nitrate and ODH with 1.2  10-3 M PdCl2 solution at 500 0C. In this way a coat layer over cordierite ceramic has been achieved and catalyst has the active sites in the form of Pd2+ ions rather than Pd metal. Weight of the active catalyst can be varied from 0.02 to 2 wt% which is sufficient but can be loaded even up to 12 wt% by repeating dip dry combustion [1]. Adhesion of catalyst to cordierite surface is via oxide growth on oxide ceramic which is very strong. 100 % conversion of CO is achieved below 80 oC at a space velocity of 880 h-1. At much higher space velocity of 21000h-1, 100 % conversion is obtained below 245 oC. Activation energy for CO oxidation is 8.4 kcal/mol. At a space velocity of 880 h-1 100% NO conversion is attained below 185 oC and 100 % conversion of ‘HC’(C2H2) below 220 oC. At the same space velocity 3-way catalytic performance over Ce0.98Pd0.02O2- coated monolith shows 100% conversion of all the pollutants below 220 o C with 15% excess oxygen. Catalytic activity of cordierite honeycomb coated by this new coating method for the oxidation of major hydrocarbons in exhaust gas is discussed further in this chapter. ‘HC’ oxidation over the monolith catalyst is carried out with a mixture having the composition, 470 ppm of both propene and propane and 870 ppm of both ethylene and acetylene with the varying amount of O2. 3-way catalytic test is done by putting hydrocarbon mixture along with CO (10000ppm), NO (2000ppm) and O2 (15000ppm). Below 350 oC full conversion is achieved [2]. A comparison of the results shows that Ce1-xPdxO2-δ far superior to other catalysts. In this method, handling of nano material powder is avoided. In the 4th chapter we present a detailed study on the catalytic combustion of hydrogen by oxygen (hydrogen oxygen recombination reaction). Ever since Michel Faraday showed H2 + O2 recombination reaction over platinum metal plates, Pt metal has remained the only room temperature recombination catalyst. In search of an alternative catalyst, we discovered a new Pt free Ti0.99Pd0.01O2- compound which shows high rates of this reaction above 45 oC compared to Ce0.98Pt0.02O2-, Pt/Al2O3 and Pd/Al2O3. High rates of H2+O2 recombination over Pt and Pd ion respectively in CeO2 and TiO2 is due to the protonic type H2+ adsorption on Pt2+ or Pd2+ and dissociative chemisorption of O2 on the electron rich oxide ion vacancies [3]. In the case of Ce0.98Pt0.02O2-, H2/Pt ratio in a TPR experiment is ~2.3 at 0 oC. In the case of Ti0.99Pd0.01O2- also, H2 adsorption occurs below 0 oC and H2 / Pd ratio is ~2.2. Thus, more than 4-5 H atoms are adsorbed per metal ion. This is attributed to hydrogen spillover. H2 is known to be adsorbed as hydride ion (H-) over Pt, Pd, Rh, Ru, Os and Ir metals. Proton NMR studies of H2 adsorbed on Pd metal have shown upfield i.e. negative shift of 12 ppm with respect to TMS. We have studied proton NMR of Ti0.99Pd0.01O2- + H2 which show a downfield shift of 11.35 ppm confirming H+ or H2+ kind of species over Pd2+ ion in Ti0.99Pd0.01O2-. In Ce0.98Pt0.02O2- also H2 adsorption led to H2+ like species observed at 8 ppm and DFT calculations indeed showed H2+ kind species. H2+ is a precursor for dissociation and can readily induce O2 dissociation leading to high rates of recombination. In the 5th chapter we report water gas shift reaction (WGS) and preferential oxidation of CO (PROX) over Ti0.99Pt0.01O2-, Ce0.83Ti0.15Pt0.02O2- and Ce0.98Pt0.02O2-δ. The water gas shift reaction (WGS) is an important reaction to produce hydrogen. In this study, we have synthesized nano crystalline catalysts where Pt ion is substituted in the +2 state in TiO2, CeO2 and Ce1-xTixO2-δ. The catalysts have been characterized by X-ray diffraction and X-ray photoelectron spectroscopy (XPS) and it has been shown that Pt2+ ions in these reducible oxides of the form Ti0.99Pt0.01O2-, Ce0.83Ti0.15Pt0.02O2- and Ce0.98Pt0.02O2-δ are highly active. These catalysts were tested for the water gas shift reaction both in presence and absence of hydrogen. It is shown that Ti0.99Pt0.01O2- exhibits higher catalytic activity than Ce0.83Ti0.15Pt0.02O2- and Ce0.98Pt0.02O2-δ [4]. Further, experiments were conducted to determine the deactivation of these catalysts by performing the daily startup and shutdown of the reactor for over 24 hours. There was no sintering of Pt and no carbonate formation and, therefore, the catalyst did not deactivate even after prolonged reaction. There was no carbonate formation because of the highly acidic nature of Ce4+, Ti4+ ions in the catalysts. Further, PROX activity of these catalysts has been studied. Ce0.83Ti0.15Pt0.02O2- and Ce0.98Pt0.02O2-δ showed high activity, large operating temperature window and low working temperature proving them to be highly effective PROX catalysts. In the 6th chapter we study the electrocatalysis of formic acid electro-oxidation and simultaneously mapping the electronic states of the electrodes by X-ray photoelectron spectroscopy (XPS). Ionically dispersed platinum in Ce1-xPtxO2-δ and Ce1-x-yTiyPtxO2-δ is very active towards oxygen evolution and formic acid oxidation. Higher electro-catalytic activity of Pt2+ ions in CeO2 and Ce1-xTixO2 compared to Pt0 in Pt/C is due to Pt2+ ion interaction with the supports, CeO2 and Ce1-xTixO2 respectively [5]. Further, ionic platinum does not suffer from CO poisoning effect unlike Pt0 in Pt/C. Utilization of lattice oxygen from the electrodes during the reaction has been demonstrated. This lattice oxygen exchange is responsible to convert CO to CO2 in the lower potential region to remove CO poisoning effect. In 7th chapter we repeat our study on the noble metal ion reducible oxide interaction in Ce1-xPtxO2- and Ce1-xPdxO2- (x= 0.02) system by a novel electrochemical method combined with XPS. Working electrodes made of CeO2 and Ce0.98Pt0.02O2- mixed with 30% carbon are cycled between 0.0-1.2 V in potentio-static (chronoamperometry) and potentio-dynamic (cyclic voltametry) mode with reference to saturated calomel electrode (SCE). Reversible oxidation of Pt0 to Pt2+ and Pt4+ state due to the applied positive potential is coupled to simultaneous reversible reduction of Ce4+ to Ce3+ state. CeO2 reduces to CeO2-y (y= 0.35) after applying +1.2 V which is not reversible. But Ce0.98Pt0.02O2- reaches a steady state with Pt2+: Pt4+ in the ratio of 0.60: 0.40 and Ce4+: Ce3+ in the ratio of 0.55: 0.45 giving a composition Ce0.98Pt0.02O1.74 at 1.2 V which is reversible [6]. Composition of Pt ion substituted compound is reversible between Ce0.98Pt0.02O1.95 to Ce0.98Pt0.02O1.74 within the potential range of 0.0-1.2 V. Thus, Ce0.98Pt0.02O2- forms a stable electrode for oxidation of H2O to O2 unlike CeO2. A linear relation between oxidation of Pt2+ to Pt4+ with simultaneous reduction of Ce4+ to Ce3+ is observed demonstrating Pt-CeO2 metal support interaction is due to reversible Pt0/Pt2+/Pt4+ interaction with Ce4+/Ce3+ redox couple. Similar studies have been performed with Ce0.98Pd0.02O2- catalyst to show the redox coupling between Pd2+/Pd0 and Ce4+/Ce3+ redox couples. We expect similar redox coupling for Pd, Pt ions substituted TiO2, and Ce1-xTixO2. In the final chapter 8, a critical review and conclusion on the results presented in the thesis is presented. The combustion synthesized catalysts reported in this thesis stabilizes the Pt and Pd metals in their ionic state rather than zero valent metallic state. Thus, the catalysts are uniform solid catalysts. High activity and stability of these catalysts are shown to be due to the electronic interaction between noble metal ions and the reducible oxide. Redox couples Pt0/Pt2+, Pt2+/Pt4+ and Pd0/Pd2+ interact with Ce4+/Ce3+, Ti4+/Ti3+ couples such that metal is oxidized and the support is reduced. This has been established in the thesis by a combined use of electrochemistry and XPS thus solving a long standing problem of metal support interaction in catalysis. We hope that the results presented in the thesis is a worthwhile contribution to catalysis. (For mathematical equations pl refer pdf file.)

No description available.