Indiana University-Purdue University Indianapolis (IUPUI) / Multi-Protocol Label Switching (MPLS) is an emerging technology which is the initial step for the forthcoming generation of communication. It uses Labels in order to identify the packets unlike the conventional IP Routing Mechanism which uses the routing table at each router to route the packet. MPLS uses the techniques of FRR with the help of RSVP/CR-LDP to overcome the link and/or node failures in the network. On the other hand there are certain limitations/drawbacks of using the above mechanisms for Failure Detection and Recovery which are multiple protocols such as RSVP/CR-LDP over OSPF/IS-IS and complex algorithms to generate backup paths since each router works individually in order to create a backup tunnel. So to overcome the listed limitations, this paper discusses a new technique for MPLS Networks which is Source Routing \cite{48}. Source Routing is the technique in which the source plays the role of directing the packet to the destination and no other router plays the role of routing the packet in the network. Using the OPNET Modeler 17.5 tool for implementing source routing when there is a network failure is performed and the results are compared by implementing RSVP/CR-LDP over the same failed network. The comparative results show that the network performance is best in the case of Source Routing implementation as compared to the RSVP and CR-LDP signaling over the MPLS Networks.

Given the current developments and advances in the scientific and technological aspects of human knowledge and introducing new approaches in various fields of telecommunication technologies and industries, there has been an increasing growth in its players¿ plans and a positive change in their outlooks in order to achieve the target of "anywhere and anytime access". Recent developments of WiMAX (Worldwide interoperability for Microwave Access) networks, as a sign of increasing needs and demands for new telecommunication services and capabilities, have led to revolutions in global telecommunication which should be perceived properly in terms of the commercial and technical aspects in order to enjoy the new opportunities. Most experts believe that WiMAX technology is a preliminary step to develop Fourth Generation networks known as 4G technologies. It has not only succeeded in the utilization of several of the latest telecommunication techniques in the form of unique practical standards, but also paved the way for the quantitative and qualitative developments of high-speed broadband access. IEEE 802.16 Standard introduces several advantages, and one of them is the support for Quality of Services (QoS) at the Media Access Control (MAC) level. For these purposes, the standard defines several scheduling classes at MAC layer to treat service flow in a different way, depending on QoS requirements. In this thesis, we have proposed a new QoS framework for Point-to-Multi Point (PMP) 802.16 systems operating in Time Division Duplexing (TDD) mode over a WirelessMAN-OFDM physical layer. The proposed framework consists of a Call Admission Control (CAC) module and a scheduling scheme for the uplink traffic as well as a simple frame allocation scheme. The proposed CAC module interacts with the uplink scheduler status and it makes its decision based on the scheduler queue status; on the other hand, the proposed scheduling scheme for the uplink traffic aims to support realtime flows and adapts the frame-by-frame allocations to the current needs of the connections, with respect to the grants boundaries fixed by the CAC module. Extensive OPNET simulation demonstrates the effectiveness of the proposed architecture.

Οι οικονομικές και τεχνολογικές εξελίξεις των τελευταίων ετών, η απελευθέρωση της αγοράς, οι ισχυρές κατά απαίτηση πολυμεσικές υπηρεσίες καθώς και ο αυξημένος αριθμός χρηστών των κινητών δικτύων υποδεικνύουν την αναγκαιότητα της σύγκλισης των δύο δικτυακών τεχνολογιών (κινητή τηλεφωνία και internet) με στόχο την παροχή υπηρεσιών Internet στο περιβάλλον των κινητών επικοινωνιών. Η παραπάνω απαίτηση οδήγησε στην δημιουργία του δικτύου επόμενης γενιάς NGN. Η διπλωματική αυτή εργασία ασχολείται με την μελέτη της αρχιτεκτονικής του επιπέδου υπηρεσιών και την υποστήριξη Ποιότητας Υπηρεσίας (QoS) σε δίκτυα Νέας Γενιάς. Συγκεκριμένα δίνεται έμφαση στις λειτουργίες ελέγχου, σηματοδοσίας και λειτουργιών αρχιτεκτονικής του QoS σε επίπεδο υπηρεσιών. Αρχικά, ορίζουμε την έννοια “QoS” όσον αφορά την οπτική του δικτύου και το χρήστη. Περιγράφονται η αρχιτεκτονική του στρώματος υπηρεσιών του δικτύου καθώς και οι λειτουργίες ελέγχου πόρου και αποδοχής των κλήσεων, που αποτελούν σημαντικό μέρος της αρχιτεκτονικής του NGN. Στη συνέχεια παρουσιάζονται αρχιτεκτονικές που προορίζονται για την παροχή του QoS (IntServ, DiffServ), στη Συμφωνία Στάθμης Παρεχόμενης Υπηρεσίας (SLA), το πρωτόκολλο σηματοδοσίας COPS. Επίσης, δίνουμε έμφαση σε ορισμένες πτυχές (χρονοδρομολόγηση, διαχείριση ουρών) μίας QoS αρχιτεκτονικής, οι οποίες είναι ζωτικής σημασίας όσον αφορά την αποδοτική παροχή Ποιότητας Υπηρεσίας. Στη συνέχεια, με τη χρήση του εργαλείου προσομοίωσης OPNET, διεξάγουμε μια σειρά προσομοιώσεων σε ένα ATM και σε ένα NGN δίκτυο. Τέλος, παραθέτουμε και αναλύουμε τα αποτελέσματα των προαναφερθέντων πειραμάτων. / The concept of an NGN (Next Generation Network) has been introduced to take into consideration the new realities in the telecommunications industry, characterized by factors such as: competition among operators due to ongoing deregulation of markets, explosion of digital traffic, e.g.,increasing use of "the Internet", increasing demand for new multimedia services, increasing demand for a general mobility, convergence of networks and services, etc. This thesis has as subject the architecture of service stratum and presents an overview of standards functions defining the Quality of Service (QoS) in Next Generation Networks (NGNs). Several standards bodies define the QoS control architectures based on their scope of work. Specifically, emphasis is given to control functions, signalling and functional architecture of QoS in service stratum. Firstly, we define the meaning of QoS according to the view of the operator’s network and terminal users. The functional architecture of service stratum and especially the part of resource and admission control functions are described in the main body. Furthermore, architectures as IntServ and DiffServ, SLAs and COPS protocol are used as providers of the QoS. Scheduling and queuing management are necessary to optimize the QoS in NGN networks. In this project, we use OPNET simulator in two scenarios to determine construct and control ATM and NGN networks. Finally, collect the results of the experiments and analyze them.

Approved for public release, distribution is unlimited / Wireless mesh networking has emerged as the successor of the traditional ad hoc networks. New technological advances, the standardization of protocols and interfaces and the maturity of key components have made it possible for current mesh research groups to set goals that are really close to the world's expectations. The objective of this research is to design and implement a simulation toolkit for wireless mesh clusters that can be used as an additional performance evaluation technique for the Tactical Network Topology program of Naval Postgraduate School. This toolkit is implemented in the OPNET simulation environment and it incorporates various nodes running different ad hoc routing protocols. Furthermore, the investigation of a suitable combination of protocols for the Tactical Network Topology is achieved by creating scenarios and running a number of simulations using the mesh toolkit. / Captain, Hellenic Air Force

Submitted by Edisangela Bastos (edisangela@ufpa.br) on 2014-01-13T19:18:21Z No. of bitstreams: 2 license_rdf: 23898 bytes, checksum: e363e809996cf46ada20da1accfcd9c7 (MD5) Dissertacao_AvaliacaoTecnologiaFemtocell.pdf: 6899905 bytes, checksum: 6f9fe92f8092f1159ecbcd1e607afc6e (MD5) / Approved for entry into archive by Ana Rosa Silva(arosa@ufpa.br) on 2014-01-16T12:20:24Z (GMT) No. of bitstreams: 2 license_rdf: 23898 bytes, checksum: e363e809996cf46ada20da1accfcd9c7 (MD5) Dissertacao_AvaliacaoTecnologiaFemtocell.pdf: 6899905 bytes, checksum: 6f9fe92f8092f1159ecbcd1e607afc6e (MD5) / Made available in DSpace on 2014-01-16T12:20:24Z (GMT). No. of bitstreams: 2 license_rdf: 23898 bytes, checksum: e363e809996cf46ada20da1accfcd9c7 (MD5) Dissertacao_AvaliacaoTecnologiaFemtocell.pdf: 6899905 bytes, checksum: 6f9fe92f8092f1159ecbcd1e607afc6e (MD5) Previous issue date: 2013 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Mensurar os impactos do tráfego de aplicações interativas para TV Digital nas redes sem fio de 4a geração em especial WIMAX e femtocell tem sido um grande desafio para pesquisadores em todo o mundo, o teste destas tecnologias se mostra promissora para a melhor qualidade de serviço prestado pelas operadoras. Inicialmente, identificando o padrão de tráfego de rede através da aferição e caracterização de tráfego de uma aplicação interativa de TV Digital do Sistema Brasileiro de TV Digital (SBTVD). A partir de então, as simulações são feitas sobre uma rede sem fio. Para este estudo, a rede WiMAX foi escolhida como um de nossos estudo de caso. Um estudo dos impactos do uso desta aplicação em uma WMAN (Wireless Metropolitan Área Network) com WiMAX e também utilizando femtocells. Evidentemente, tecnologias sem fio apresentam uma grande variação da qualidade do sinal. Deste modo, é necessário utilizar uma solução para reduzir essa degradação no sinal. Dentre as possíveis soluções, o uso de femtocells surge como alternativa viável para estas melhorias, lembrando que uso de femtocell esta diretamente ligado para áreas onde o sinal é zero ou muito baixo. A utilização de simulações discretas através de ferramentas apropriadas como o OPNET, se mostram bastante úteis para viabilizar a utilização das tecnologias existentes, expondo-as a condições mais adversas de fluxo, carga , numero de usuários e distancias que certamente influenciam no desempenha de cada uma delas. / Traffic measurement on Digital TV interactive applications for fourth generation networks, especially WiMAX and femtocell, has been a challenge to researchers around the world. The traffic pattern of an interactive application on the Brazillian System of Digital TV (SBTVD) was identified. Simulations on a wireless network were carried out using data obtained of traffic analysis. In this work a WiMAX and a femtocell network were chosen to simulate the return channel of a Digital TV application on a WMAN (Wireless Metropolitan Area Network). In order to reduce signal attenuation, femtocell arises as a promising solution, reducing macrocell usage, as femtocells cover indoor environments. The simulations is this work were executed using OPNET software. Through them it is possible to estimate the feasibility of femtocell and WiMAX technologies as return channel for Digital TV.

This master’s thesis deals abou the transmission of voice in communications networks. The theoretical part describes criteria for optimizing voice, such as quality of service, type of service, level of service, service type, and mean opinion score. Next I describe the Internet Protocol, comparing IPv4 and IPv6, VoIP, including security, protocols and parameters necessary for transmission. Other part is about neural networks. There are basically described the neural network, Hopfield neural network and Kohenen neural network. The research is based on a comparison of the network without ensuring the quality of service and with ensuring quality of service. Then, there are compared two types of switches. Classical switch-controlled sequentially, and switch controlled by neural networks. The overall simulation program is implemented in Opnet Modeler. The conclusion deals with the creation of laboratory tasks in this program to compare the different systems of ensuring quality of service.

A thesis which models the DNP3 and IEC 61850 protocol in OPNET / Supervisory Control and Data Acquisition (SCADA) is a critical part of monitoring and controlling of the electrical substation. The aim of this dissertation is to investigate the performance of the Distributed Network Protocol Version 3.3 (DNP3) protocol and to compare its performance to that of International Electro-technical Commission (IEC) 61850 protocol in an electrical substation communication network environment. Building an electrical substation control room and installing the network equipment was going to be expensive and take a lot of time. The better option was to build a model of the electrical substation communication network and run simulations. Riverbend modeller academic edition known as Optimized Network Engineering Tool (OPNET) was chosen as a software package to model substation communication network, DNP3 protocol and IEC 61850 Protocol stack. Modelling the IEC 61850 protocol stack on OPNET involved building the used Open System Interconnection (OSI) layers of the IEC 61850 protocol stack onto the application definitions of OPNET. The Transmission Control Protocol/Internet Protocol (TCP/IP) configuration settings of DNP3 protocol were also modelled on the OPNET application definitions. The aim is to compare the two protocols and determine which protocol is the best performing one in terms of throughput, data delay and latency. The substation communication model consists of 10 ethernet nodes which simulate protection Intelligent Electronic Devices (IEDs), 13 ethernet switches, a server which simulates the substation Remote Terminal Unit (RTU) and the DNP3 Protocol over TCP/IP simulated on the model. DNP3 is a protocol that can be used in a power utility computer network to provide communication service for the grid components. DNP3 protocol is currently used at Eskom as the communication protocol because it is widely used by equipment vendors in the energy sector. DNP3 protocol will be modelled before being compared to the new recent robust protocol IEC 61850 in the same model and determine which protocol is the best for Eskom on the network of the power grid. The network load and packet delay parameters were sampled when 10%, 50%, 90% and 100% of devices are online. The IEC 61850 protocol model has three scenarios and they are normal operation of a Substation, maintenance in a Substation and Buszone operation at a Substation. In these scenarios packet end to end delay of Generic Object Oriented Substation Event (GOOSE), vi © University of South Africa 2020 Generic Substation Status Event (GSSE), Sampled Values (SV) and Manufacturing Messaging Specification (MMS) messages are monitored. The throughput from the IED under maintenance and the throughput at the Substation RTU end is monitored in the model. Analysis of the results of the DNP3 protocol simulation showed that with an increase in number of nodes there was an increase in packet delay as well as the network load. The load on the network should be taken into consideration when designing a substation communication network that requires a quick response such as a smart gird. GOOSE, GSSE, SV results on the IEC 61850 model met all the requirements of the IEC 61850 standard and the MMS did not meet all the requirements of the IEC standard. The design of the substation communication network using IEC 61850 will assist when trying to predict the behavior of the network with regards to this specific protocol during maintenance and when there are faults in the communication network or IED’s. After the simulation of the DNP3 protocol and the IEC 61850 the throughput of DNP3 protocol was determined to be in the range (20 – 450) kbps and the throughput of IEC61850 protocol was determined to be in the range (1.6 – 16) Mbps. / College of Engineering, Science and Technology / M. Tech. (Electrical Engineering)

No description available.

Long Term Evolution (LTE) known in the market as 4G LTE, it is an evolution of the GSM/UMTS standard. The overall aim of LTE was to provide a new radio access technology focusing on packet-switched data only. LTE has provided a new peak download rates, low data transfer latencies, and improved the support for mobility. 3Th Generation Partnership Project (3GPP) specialized that LTE released 10 and beyond known as LTE-advanced it is the second evolution of LTE. It has some services such as Coordinated Multipoint Transmission and Reception (CoMP), evolved Multimedia Broadcast and Multicast Service (eMBMS) with Multicast-Broadcast Single-Frequency Network (MBSFN). The development still continuous on LTE-advanced, it is intended to meet the requirement of advanced application that will become common in the wireless marketplace in future. The goals of this project is to simulate one of LTE-A services on LTE standard such as CoMP or/and eMBMS with MBSFN using OPENT LTE, and measure some statistic such as spectral efficiency and also some other statistics, describe centralization vs. decentralization in LTE, and synchronization in the base station in LTE. OPNET LTE support eMBMS with MBSFN, and don’t support CoMP, the simulation has been done by using eMBMS with MBSFN. Finally the objectives of the project has achieved, the result show that when eMBMS with MBSFN is implemented the throughput increased in the downlink to about 5.52 Mbps and in the uplink to about 5.18 Mbps, and also the system spectral efficiency increased in eNB1 from about 10.25 (bits/s/Hz/cell) to about 13.75 (bits/s/Hz/cell) and in eNB2 from about 10.25 (bits/s/Hz/cell) to about 17.25 (bits/s/Hz/cell). The project also answers if it is possible to have centralization in LTE, describe synchronization in the base station in LTE, and if OPNET is useful for big research.