A sílica SBA-15 devido às suas propriedades físico-química e estrutural tem demonstrado efeito adjuvante, carreando, protegendo e liberando antígenos. Nesse estudo avaliou-se o seu efeito sobre a atividade fagocítica de macrófagos; no recrutamento de células para órgãos linfóides; na expressão de moléculas MHC de classe II e co-estimuladoras pelas APCs; e a influência do tempo de contato imunógeno:SBA15 no potencial de adsorção e geração de anticorpos. Experimentos in vitro evidenciam que diferentes concentrações da SBA-15 não afetam a morfologia ou atividade de macrófagos. A SBA15 induz o recrutamento de macrófagos, células dendríticas, CD4+, CD8+ e B220+ para os linfonodos drenantes, promovendo aumento de expressão de moléculas co-estimuladoras. As análises da produção de anticorpos demonstram que o contato imunógeno:sílica é importante na adsorção e melhora da resposta imune. Esses resultados sugerem que o potencial adjuvante da SBA-15 relaciona-se com a capacidade de adsorver antígenos e liberá-los às APCs, influindo diretamente na reposta imunológica. / The SBA-15 silica is a polymer that due to its physico-chemical and structural properties has shown adjuvant effect, carrying, protecting and delivering antigens. In this study was evaluated the effect of SBA15 in the phagocytic activity of macrophages; recruitment of cells to lymphoid organs; expression of MHC class II and co-stimulatory molecules by the APCs, and the influence of contact time between immunogen:SBA-15 in potential for absorption and generation of antibodies. In vitro experiments showed that different concentrations of SBA-15 do not affect the morphology or macrophage activity. SBA-15 induces the recruitment of macrophages, dendritic cells, CD4+, CD8+ and B220+ to the draining lymph nodes, increasing the expression of co-stimulatory molecules. Analyses of antibody production showed that the contact immunogen:silica is important for adsorption and improves the immune response. These results suggest that the adjuvanticity of SBA-15 is related to its ability in antigens adsorption and release to APCs, directly influencing the immune response.

De nouveaux précurseurs borates-triéthoxysilanes comprenant le closo-decahydrodecaborate ont été préparés et immobilisés dans la silice. L'introduction des groupements trialkoxysilyles sur les clusters (NH4)2B10H10, a été réalisée par condensations électrophiles faisant appel à des réactifs nucléophiles dans des conditions douces, tout en épargnant l'utilisation d'électrophiles ou de catalyseurs coûteux. Les borates-trialkoxysilanes obtenus ont été caractérisés par RMN 1H, 13C, 11B, 29Si, 31P, IRTF, analyse élémentaire et spectroscopie de masse. Comme preuve de concept, ces précurseurs ont été incorporés de manière covalente dans les pores d'une silice mésoporeuse, SBA-15. Tous les matériaux hybrides mésoporeux et modifiés avec du borate-triéthoxysilane ont été caractérisés par RMN solide 11B et 29Si, DRX, MET, les analyses élémentaires et étude de l'adsorption d'azote (méthode BET). Les précurseurs silylés-borate ont été combinés avec des nanoparticules de silice pour une utilisation éventuelle dans BNCT, où des NPs d'environ 100 nm ont été synthétisées comprenant deux types de centres luminescents différents. FITC silylé (isothiocyanate de fluorescéine) et complexe Eu (III) silylé ont été respectivement immobilisés dans des nanoparticules de silice par le procédé sol-gel. Les deux types de nanoparticules luminescentes ont été fonctionnalisés par les groupes silylés-borates et caractérisés par RMN du solide 11B, 31P et 29Si, DLS, MET, analyses élémentaires, d'adsorption d'azote et spectrophotométrie. / New borate-triethoxysilane precursors comprising the closo-decahydrodecaborate cluster were prepared and immobolized into hybrid silica materials. The synthesis of silylated clusters starting from (NH4)2B10H10 and silane precursors R-Si(OEt)3 through Electrophilic Induced Nucleophilic Reactions was performed under mild conditions, the silylated clusters were analyzed by 1H, 13C, 11B, 29Si, 31P NMR, IR, elemental analyses and mass spectroscopy ES-ESI. As a proof of concept, the borate-triethoxysilane precursors were covalently incorporated into the pores of mesoporous silica, SBA-15 type. All mesoporous materials modified with borate-triethoxysilane were characterized by 11B and 29Si solid state NMR, XRD, TEM, elemental analyses and Nitrogen sorption studies. The silylated-borate precursors were combined with dye-doped silica nanoparticles for possible future use in BNCT technique, where ~100 nm nanoparticles were synthesized comprising two different types of luminescent centers. Silylated FITC (fluorescein isothiocyanate) and silylated Eu(III) complexes were embedded into silica nanoparticles through sol-gel process. Both types of luminescent nanoparticles were functionalized with the silylated-borate clusters and characterized by 11B, 31P and 29Si solid state NMR, DLS, TEM, elemental analyses, Nitrogen sorption studies and spectrophotometer.

L'objectif de ce projet de thèse a été d’étudier l’activité catalytique de catalyseurs commerciaux contenant de nanoparticules métalliques pour l'hydrogénation du limonène. La réaction a été réalisée en l'absence de solvants et dans des conditions douces c’est à dire à basse température (30°C) et sous faible pression d'hydrogène (3 bar), conduisant à une production stable du (+)-p-1-menthene. Dans notre étude, les nanoparticules métalliques actives (Pt, Pd et Ru) et les supports (carbone, silice et alumine) ont été systématiquement modifiés et testés dans des conditions de réaction modérées (température ambiante, 3 bar H2). Notre étude a révélé une activité et sélectivité importante du catalyseur hétérogène Pt/C pour la réduction du R-(+)-limonène en (+)-p-1-menthène qui est le produit partiellement hydrogéné. Le Pt/C ainsi que Pt/Al2O3 est l’un des systèmes les plus actifs parmi les catalyseurs actuellement disponibles dans le commerce. De plus, l'activité catalytique et la stabilité de Pt/C ont été maintenues au cours des essais de recyclage en réacteur fermé. Ce catalyseur a également été utilisé en réacteur à flux continu, donnant des résultats prometteurs. L'hydrogénation sélective de la liaison C=C terminale du limonène par rapport de la liaison interne a été rationalisée par des études cinétiques détaillées qui révèlent une vitesse 8 fois plus importante par la double liaison terminale. Cette première étude nous a permis de développer la synthèse de nouveaux catalyseurs hétérogènes contenant diverses nanoparticules métalliques (Pt, Ru, Pt3Sn et Ni). Ils ont été préparés à partir d'une approche colloïdale et ont été testés dans l'hydrogénation de limonène. Ces catalyseurs contiennent la même charge métallique et des tailles de particules similaires (environ 2 nm) dispersées de façon homogène sur des oxydes non structurés (silice et d'alumine), du carbone, ou incorporés à l'intérieur des murs ou à la surface des pores de matériaux mésostructurés siliciques (SBA-15). L’ensemble des catalyseurs de la série du Pt ont révélés une activité accrue lors de l'hydrogénation sélective du limonène en p-menthène puis en p-menthane avec une vitesse de réaction très élevé. Parmi tous ces catalyseurs, celui contenant des nanoparticules de Pt dans les murs de la silice a montré au bout de deux heures de réaction un TOF d'environ 2200 h-1 et un rendement maximal pour le p-menthène d'environ 85% après 10 heures de réaction. Ce même catalyseur a été testé dans un réacteur en flux continu et affiche après 6 heures un rendement en p-menthene stable de 80%. Aucun produit d'isomérisation n’a été détecté dans le mélange brut au cours de la réaction. En conclusion, nous pouvons dire que l'utilisation d'un catalyseur hétérogène commercial comme le Pt/C ou l’utilisation d’un catalyseur hétérogène métallique développé à partir d'une approche colloïdale, Pt@SBA-15{murs}, permet d'obtenir une conversion sélective du limonène en p-menthène en réacteur fermé ainsi également en réacteur à flux continu. Des informations sur la cinétique de cette réaction ont également pu être obtenues / The goal of this PhD project was in an early stage to study the activities of several commercial metal nanoparticles based catalysts for the mild hydrogenation of limonene. The hydrogenation of limonene has been performed in neat limonene and under mild conditions, e.g. low temperature (30°C) and low molecular hydrogen pressure (3 bar), aiming at a sustainable production route for (+)-p-1-menthene. In our study, the active metal nanoparticles (Pt, Pd and Ru) and supports (carbon, silica and alumina) were systematically varied and tested. It was found that the heterogeneous catalyst Pt/C alongside Pt/Al2O3 under mild reaction conditions (room temperature and 3 bar H2) was highly active and selective in the reduction of R-(+)-limonene to the partial hydrogenation product (+)-p-1-menthene. Moreover, the catalytic activity and stability of Pt/C were maintained during recycling tests under batch conditions and thus allowed the implementation of this catalytic system into continuous flow operation. The selective hydrogenation of terminal C=C bond over the internal one in limonene was rationalized by detailed kinetic studies which revealed an 8-fold difference in reaction rate between the two reactions. This previous study with commercial catalysts gave the possibility to tune the synthesis of heterogeneous metal-based catalysts for the next step of the study, where different heterogeneous metal based catalysts (Pt, Ru, Pt3Sn, and Ni), developed from a colloidal-based approach were tested in the hydrogenation of limonene. Those catalysts contain the same metal loading and similar particle sizes (ca. 2 nm) homogeneously dispersed onto non structured oxides (silica and alumina), carbon, or embedded into the walls or at the pore surface of a mesostructured silica materials (SBA-15). All the catalysts from the Pt series were particularly active in the selective hydrogenation of limonene towards p-menthene with further conversion into p-menthane, showing a very high reaction rate. Among of all those catalysts, the one containing Pt nanoparticles embedded in the walls of the silica showed the highest TOF, of ca. 2200 h-1 after two hours of reaction and a maximum yield in p-menthene of ca. 85 % was obtained after 10 hours of reaction. The same catalyst was tested in a continuous flow system and a stable yield of ca. 80% during 6 hours of reaction was reached. No products of isomerization were detected in the crude mixture during the reaction. We could therefore conclude that, using either a heterogeneous commercial catalyst like Pt/C or using a heterogeneous metal based catalyst developed from a colloidal-based approach like SBA-15{walls}, it was possible to achieve a selective conversion of limonene into p-menthene in batch and in continuous flow conditions

Para atestar a imunogenicidade de vacinas contra raiva, os testes de titulação e de soroneutralização de vírus rábico em células BHK-21 foram validados quanto à linearidade, precisão, exatidão e robustez. Cinco esquemas de imunização com diferentes concentrações, vias de inoculação e intervalos entre as doses foram avaliados em camundongos com vacina contra raiva em células Vero. O grupo II que recebeu um esquema de 2 doses e intervalos maiores (0 e 60 dias) apresentou títulos de anticorpos neutralizantes [ACN] mais elevados (46,1 UI/mL) do que o Grupo I (19,4 UI/mL), de 3 doses e intervalos menores (0,7 e 28 dias). O grupo III, que recebeu 2 doses, sendo a 1ª diluída 1/10, apresentou ACN semelhantes ao grupo II (39,2 UI/mL), sendo igualmente eficaz. Nenhum animal do grupo IV, imunizado por via oral (VO) apresentou ACN, indicando supressão e todos os do grupo V, imunizados VO com antígeno adsorvido/encapsulado em sílica nanoestruturada SBA-15, apresentaram títulos de ACN detectáveis, mostrando que o antígeno foi protegido da degradação no trato gastrointestinal. / To assure the reliability of the results of immunogenicity of rabies vaccines, tests of virus titration and neutralization in BHK-21 cells were validated for linearity, precision, accuracy and robustness. Five schemes of immunization with different concentrations, routes of inoculation and intervals between doses were evaluated in mice with rabies vaccine in Vero cells. Group II, immunized with 2 doses and enlarged interval (0 and 60 days) presented higher levels of neutralizing antibody (NAs) (46,1 IU/mL) than group I (19,4 IU/mL), with 3 doses and shorter intervals (0,7 and 28 days). Group III, which received 2 doses, the 1st diluted to 1/10, presented results similar to group II (39,2 IU/mL). None mouse of Group IV, immunized by oral route, presented NAs, indicating suppression and all mice of group V, immunized by oral route with vaccine adsorbed/encapsulated in nanostructured SBA-15 silica presented detectable NAs titers, showing that the SBA-15 silica prevented the antigen degradation in the gastrointestinal tract.

El plan de investigación se centra en el estudio y diseño de catalizadores híbridos para el proceso de síntesis directa de dimetil éter (DME) a partir de gas de síntesis, también conocido en la literatura como "Syngas-To-DME o STD process" [1]. Para llevar a cabo el proceso de síntesis directa de DME se emplean catalizadores híbridos constituidos por mezclas físicas del componente de síntesis de metanol (catalizador basado en Cu) y el componente ácido que lleva a cabo la deshidratación de metanol para dar lugar al DME (zeolita) [1]. De manera general, las labores en las que se centra el plan de investigación persiguen lograr un mayor entendimiento de las propiedades del catalizador híbrido que determinan su comportamiento en el proceso de síntesis directa de DME (STD), prestando especial atención al componente zeolítico con el cual están asociadas la mayoría de controversias en la literatura científica. / García Trenco, A. (2013). Desarrollo de catalizadores híbridos CuZnOAl2O3/zeolita para el proceso de síntesis directa de DME [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/34781 / TESIS

[pt] Os catalisadores de platina, níquel e platina suportados em sílica-alumina e sílica mesoporosa (SBA-15) foram investigados para o hidrotratamento do óleo de coco para produção de bio-óleo. Os suportes foram carregados com 1 por cento de Pt e 5 por cento de Ni e os catalisadores resultantes foram caracterizados para determinar suas propriedades estruturais e de textura. Os catalisadores foram reduzidos e testados em um reator semi-descontínuo a 360 C sob 10 MPa de hidrogênio durante 4 horas. Foram obtidos 30-40 por cento de remoção de oxigênio. As curvas de destilação dos produtos e seu ponto de inflamação e gravidade específica (a 20 C) foram determinados pelos métodos oficiais ASTM e ABNT/NBR a serem comparados com o diesel derivado do petróleo. As curvas de destilação e as propriedades físico-químicas foram muito próximas das especificações estabelecidas pela legislação brasileira para o diesel comercial. Destilou-se 90 por cento do volume de cada produto na faixa de temperatura de 180-370 C, o ponto de inflamação ficou entre 76-81 e o número do índice de cetano foi calculado como 47-48, de acordo com as especificações do diesel comercial. Os produtos obtidos com os catalisadores Pt/SiO2Al2O3 e PtNi/SBA-15 também apresentaram gravidade específica dentro da faixa de especificação (865 e 860,0 kg/m3, respectivamente). Os catalisadores utilizados mostraram sua potencial aplicação para a produção de biocombustíveis na faixa de diesel de petróleo pelo processo de hidrotratamento de óleo de coco. / [en] Platinum, platinum nickel and nickel catalysts supported on silicaalumina and mesoporous silica (SBA-15) were investigated for hydrotreating of coconut oil to produce bio oil. The supports were loaded with 1 percent Pt and 5 percent Ni content and the resulted catalysts were caracterized to determine their strutural and textural properties. The catalysts were reduced and tested in a semi-batch reactor at 360 C under 10 MPa of hydrogen during 4 hours. It was obtainned 30-40 percent of oxygen removal. The distillation curves of products and their flash point and specific gravity (at 20 C) were determined by oficials ASTM, and ABNT/NBR methods to be compared with the petroleum-derived diesel. The distillation curves and physicochemical properties were very close to specifications stabilished by Brazilian legislation for comercial diesel. 90 percent of the volume of each product was distilled in the temperature range of 180-370 C, the flash point was between 76-81 and the cetane index number was calculated as 47-48 in agreement with the specifications for comercial diesel. The products obtainned using the Pt/SiO2Al2O3 and PtNi/SBA-15 catalysts also presented specific gravity within the specification range (865 e 860.0 kg/m3 respectively). The catalysts used showed their potential application for the production of biofuels in the petroleum diesel range by coconut oil hydrotreatment process.

[pt] A reação de síntese de Fischer-Tropsch tem despertado interesse pelo seu caráter tecnológico e científico uma vez que este processo é capaz de converter o gás natural em produtos de elevado valor agregado. No presente trabalho, catalisadores de ferro suportados em sílica alumina ou em SBA-15 foram sintetizados, caracterizados, ativados e empregados na síntese de Fischer Tropsch. Os catalisadores foram preparados via impregnação incipiente do ponto úmido utilizando cloreto de ferro III, obtendo-se catalisadores de porcentagem mássica próximos a 5%, 10% e, no caso da sílica alumina, 2% também. As amostras foram caracterizadas por análise termogravimétrica (ATG), por medidas de adsorção física de N2, difração de raios-X (DRX) e redução à temperatura programada (RTP). O teor de ferro foi determinado pela espectroscopia de raios X por dispersão de energia (EDX). A ativação dos catalisadores e, em seguida, os testes catalíticos foram conduzidos em um reator tubular de bancada e os produtos gasosos foram analisados através de cromatografia gasosa com detector por ionização de chama (CG-DIC), cuja análise mostrou a formação de hidrocarbonetos C1-C5. A adsorção física de N2 revelou que, a introdução de ferro nos suportes, diminuiu a área superficial específica e o volume de poro dos materiais. A difração de raios X foi realizada para os catalisadores após a calcinação, mostrando a presença das fases α-Fe2O3 e Fe3O4; após a ativação e após a reação, onde se encontrou Fe0 e carbetos de ferro Fe5C2 e Fe2C. Os testes catalíticos mostraram maior seletividade aos hidrocarbonetos C2-3 para os catalisadores suportados em SBA-15. / [en] The Fischer-Tropsch synthesis reaction has showed interest due to its technological and scientific character since the process is able to convert natural gas into high added value products. In the present work, iron catalysts supported on SBA-15 or silica doped alumina were synthesized, characterized, activated and employed in the Fischer Tropsch synthesis. The catalysts were prepared via incipient wetness impregnation method using iron III chloride, obtaining catalysts with a weight percentage of about 5%, 10% and, in the case of silica doped alumina, 20% as well. The samples were characterized by thermogravimetric analysis (ATG), with measurements of N2 physisorption, X-ray diffraction (DRX) and temperature programmed reduction (RTP). Iron content was determined by energy dispersive X-ray spectroscopy (EDX). The catalysts activation and, subsequently, their catalytic tests were conducted in a bench tubular reactor and the products were analyzed by gas chromatography with flame ionization detector (CG-DIC), where it was detected the formation of C1-C4 hydrocarbons. The N2 physisorption showed that the introduction iron in the supports decreased the specific surface area and the pore volume of the materials. X-ray diffraction was performed for catalysts after calcination, showing the presence of α-Fe2O3 and Fe3O4 phases, after activation and after reaction, where it was found crystals of Fe0 and iron carbides Fe5C2 and Fe2C. The catalytic tests showed greater C2-3 selectivity for SBA-15 supported catalysts.

A range of mesoporous materials based on SBA-15 have been prepared and characterised. The materials were templated by neutral block copolymer P123, and typically have a hexagonal (p6mm) pore structure, with high surface areas and narrow pore size distributions. The removal of the surfactant template by calcination and solvent extraction has been investigated. The aqueous stability of this material, and the hydrolysis of the surface was studied. Organic functional groups were incorporated into the silica surface by co-condensation, or by post synthesis grafting. A range of functional groups were incorporated, including amine, carboxy, allyl and thiol groups. The pore size of the materials was controlled by the addition of trimethoxybenzene during synthesis, which significantly increased the pore size and uptake capacity of the materials. The adsorption of CALB by SBA-15 was investigated, with support materials extracted by calcination or solvent extraction. Rapid uptake at high loading was observed, with a maximum loading of 450 mg g-1 measured. The leaching of the enzyme from the support was investigated, and found to be high with unfunctionalised supports. The leaching from functionalised supports incorporating sulfur groups was significantly reduced. The activity of the immobilised CALB was measured by tributyrin hydrolysis in aqueous media, and by enantioselective transesterification of (R)-1-phenylethanol in organic media. The effect of surface functionalisation for reusability and thermal stability in aqueous systems was investigated. Preliminary studies of supported CALB for dynamic kinetic resolution were carried out, with an investigation of acidic zeolites and a mesoporous supported catalyst for 1-phenylethanol racemisation. The encapsulation of immobilised CALB was investigated, and the activity and reusability of these systems studied.

Uma das desvantagens dos bio-óleos precursores do biodiesel é a alta carga de compostos oxigenados que diminuem seu poder de combustão, reduzindo sua eficiência e inviabilizando seu uso em larga escala. Nesse contexto, o processo de hidrodesoxigenação (HDO) é relevante, dado que elimina esses compostos através de uma reação catalítica e, portanto, aumenta o poder calorífico do combustível. Neste trabalho, estudou-se a HDO do guaiacol (2-metoxifenol) como composto modelo dos bio-óleos derivados da biomassa e avaliou-se o desempenho de catalisadores de Ni e Mo no processo. Estudou-se a performance de um catalisador suportado em SBA-15 - um material mesoporoso de sílica de alta área superficial - em comparação a de um catalisador tradicional suportado em gama-alumina. Para tal, utilizou-se um sistema contínuo em fase gasosa e reator de leito fixo. Utilizaram-se técnicas de caracterização de catalisadores, como adsorção de N2, MEV, MET, DRX, TPR-H2, FTIR, TPO-O2, Raman e TGA. Através das análises DRX e MET, comprovou-se que se formaram partículas de NiO e MoO3 de menor tamanho e mais dispersas no caso do catalisador de SBA-15, devido à menor interação com o suporte e maior área superficial, o que resultou em um grau de redução de 91,6 % deste catalisador, em comparação a 73,4 % do outro, analisados por TPR-H2. Os testes catalíticos mostraram que o catalisador de NiMo/SBA-15 supera o de alumina em termos de conversão no intervalo de 200 a 300 °C, com ciclohexeno e ciclohexano como principais produtos, em face à maior seletividade a catecol e fenol no NiMo/?-Al2O3. A 300 °C, o catalisador suportado em sílica alcançou taxas de 66,5 % para a HDO e 35,3 % HDA (hidrodesaromatização), enquanto o de alumina obteve somente 30,8 e 2,7 %, respectivamente. Finalmente, comprovou-se que o SBA-15 teve uma taxa de desativação por coque de 1,14 mgcoque gcat-1 h-1, 31 % menor que a taxa do catalisador de alumina, cujos depósitos foram de carbono grafítico bem estruturado e irreversível. Em vista dos resultados obtidos, esta dissertação apresenta as rotas e mecanismos de reação do guaiacol nos catalisadores estudados, conhecimento que é relevante para o desenvolvimento e aprimoramento de futuros catalisadores da HDO. / A key disadvantage of the bio-oils precursors of biodiesel is the high load of oxygenated compounds that reduce their heat of combustion, dropping their efficiency and making them unfeasible on a large scale. In light of that, the hydrodeoxygenation process (HDO) is relevant, since it eliminates these compounds through a catalytic reaction, thus increasing the calorific value of the fuel. In this work, the HDO of guaiacol (2-methoxyphenol) as a model compound of the bio-oils derived from biomass was studied and the performance of Ni-Mo catalysts was evaluated. A catalyst supported on SBA-15 - a high surface area mesoporous silica material - was compared to a traditional gamma-alumina-supported catalyst. For this purpose, a continuous gas phase setup with fixed bed reactor was employed. The catalysts properties were identified by N2 adsorption, SEM, TEM, XRD, H2-TPR, FTIR, O2-TPO, Raman and TGA techniques. Through XRD and TEM, it was verified that smaller and more dispersed NiO and MoO3 particles were formed in the case of the SBA-15 catalyst, due to the lower interaction with the support and the greater surface area, which resulted in a degree of reduction of 91.6% for this catalyst, as opposed to 73.4% for the other one, both analyzed by H2-TPR. The catalytic tests showed that the NiMo/SBA-15 outperforms the alumina catalyst in terms of conversion in the range of 200 to 300 °C, with cyclohexene and cyclohexane as main products, in contrast with major selectivity to catechol and phenol on NiMo/?-Al2O3. At 300 °C, the silica-supported catalyst achieved rates of 66.5% for HDO and 35.3% for HDA (hydrodearomatization), whereas alumina reached only 30.8 and 2.7%, respectively. Finally, it was shown that the SBA-15 catalyst had a coke deactivation rate of 1.14 mgcoke gcat-1 h-1, 31% lower than the alumina catalyst, whose coke deposits consisted of well-structured irreversible graphitic carbon. In view of the results, this dissertation proposes the routes and reaction mechanisms of guaiacol on the studied catalysts, knowledge that is pertinent for the development and improvement of future HDO catalysts.

Submitted by Rosivalda Pereira (mrs.pereira@ufma.br) on 2017-10-06T16:33:36Z No. of bitstreams: 1 DanielleOliveira.pdf: 1130236 bytes, checksum: 83c34f9b54d583457ebfcfe859d26da1 (MD5) / Made available in DSpace on 2017-10-06T16:33:36Z (GMT). No. of bitstreams: 1 DanielleOliveira.pdf: 1130236 bytes, checksum: 83c34f9b54d583457ebfcfe859d26da1 (MD5) Previous issue date: 2017-09-05 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Conselho Nacional de Desenvolvimento Científico e Tecnológico / Fundação de Amparo à Pesquisa e ao Desenvolvimento Científico e Tecnológico do Maranhão / Due to the importance of the antioxidants to guarantee the quality of the biodiesel, by the parameters of its oxidative stability, analytical methodologies have been developed to quantitatively evaluate the antioxidants present in the biodiesel matrices. In this work SBA-15 and Ni- SBA-15 (nickel incorporated in the SBA-15) were synthesized by the hydrothermal method and characterized, being used as modifier (2.5%) in polyurethane graphite based electrochemical sensors to compare their Performance in determining the antioxidants BHA (3-tert-butyl-4-hydroxyanisole) and TBHQ (tert-butylhydroquinone). Among the sensors used, the GPU electrode modified with SBA-15 was the one that presented the best response in the determination of the antioxidants in the preliminary tests, being then applied in the determination of the antioxidants in the biodiesel sample, using the technique of Differential Pulse Voltammetry (DPV ), Using BR as buffer pH = 2 as the electrolyte. The proposed method presented a linear response in the antioxidant determinations (0.993, for TBHQ determinations and 0.977 for BHA determinations), good results for the limit of detection (LOD BHA = 1, (2.03 for determinations of TBHQ and 2.13 for determinations of BHA) and accuracy (102.5% for determinations of TBHQ and 98, 97% for BHA determinations). / Devido à importância dos antioxidantes para garantir a qualidade do biodiesel, pelos parâmetros de sua estabilidade oxidativa, metodologias analíticas têm sido desenvolvidas para avaliar quantitativamente os antioxidantes presentes nas matrizes de biodiesel. Neste trabalho, SBA-15 e Ni- SBA-15 (niquel incorporado na SBA-15) foram sintetizados pelo método hidrotermal e caracterizados, sendo utilizados como modificador (2,5%) em sensores eletroquímicos à base de grafite de poliuretano para comparar o seu desempenho na determinação dos antioxidantes BHA (3-terc-butil-4-hidroxianisol) e TBHQ (tercbutilhidroquinona). Dentre os sensores utilizados, o eléctrodo GPU modificado com SBA-15 foi o que apresentou a melhor resposta na determinação dos antioxidantes nos testes preliminares, sendo então aplicado na determinação dos antioxidantes na amostra de biodiesel, utilizando a técnica de Voltametria de Pulso Diferencial (DPV), usando como eletrólito suporte o tampão BR com pH = 2. O método proposto apresentou uma resposta linear nas determinações antioxidantes (0,993, para determinações TBHQ e 0,977 para determinações BHA), também apresentou bons resultados para o limite de detecção (LD BHA= 1,00 x 10 -5, LD TBHQ = 7, 76 X 10-6), Precisão (2,03 para determinações de TBHQ e 2,13 para determinações de BHA) e exatidão (102,5% para determinações de TBHQ e 98,97% para determinações de BHA).