The National Library of Sweden uses optical character recognition software to digitize their collections of historical newspapers. The purpose of such software is first to automatically segment text and images from scanned newspaper pages, and second to read the contents of the identified text regions. While the raw text is often digitized successfully, important contextual information regarding whether the text constitutes for example a header, a section title or the body text of an article is not captured. These characteristics are easy for a human to distinguish, yet they remain difficult for a machine to recognize. The main purpose of this thesis is to investigate how well section titles in the newspaper Svenska Dagbladet can be classified by using so called image embeddings as features. A secondary aim is to examine whether section titles become harder to classify in older newspaper data. Lastly, we explore if manual annotation work can be reduced using the predictions of a semi-supervised classifier to help in the labeling process.  Results indicate the use of image embeddings help quite substantially in classifying section titles. Datasets from three different time periods: 1990-1997, 2004-2013, and 2017 and onwards were sampled and annotated. The best performing model (Xgboost) achieved macro F1 scores of 0.886, 0.936 and 0.980 for the respective time periods. The results also showed classification became more difficult on older newspapers. Furthermore, a semi-supervised classifier managed an average precision of 83% with only single section title examples, showing promise as way to speed up manual annotation of data.

The knowledge about the behavior of cables is substantial in cases of transients or in cases of faults. However, there are only a few models that are tailored to the current requirements for calculations of transient phenomena in three-phase cable systems. These models are based on complex structures. PI-section cable models with simple structures were previously qualified only for calculations in the frequency domain. A new full frequency-dependent cable model to simulate transient phenomena is introduced and validated. The model is based on lumped parameters with cascaded frequency-dependent PI-sections. For the implementation and the integration in simulation tools, it is important to investigate the impact of the PI-section parameters to the accuracy, the stability and the mathematical robustness. In this work, the impact of the frequency dependence of cable parameters, the length distribution and the number of PI-sections on the results of the developed three-phase cable model have been discussed. For simulations in the time domain, two algorithms have been presented to optimize the number of PI-sections based on a specified accuracy.

The topic of this thesis borders librarianship, archival science and literary history - it is a synthesis of several interests and views of the subject. Censorship was a powerful regime tool in the ČSR or the ČSSR and many writers were prevented of publishing any of their work. The thesis deals not only with books, which have been labeled in dictionaries as destroyed despite of their existence. It describes how the turning point between the 1960s and 1970s was manifested in libraries, book shops and secondhand bookstores; what the publishing practice of that time was like, or how the contemporaries that worked in the industry comment on the mentioned time period. Furthermore, the thesis explains what happened to the books that had been banned overnight, what the Editorial Board's practice was like, and finally, what working with banned books involved. A part of the thesis consists of outlining the political background including presentation of the list of books that were not allowed to be published, had to be withdrawn, or the whole edition "dissapeared". How many of such books can readers today actually hold in their hands? The described books (and thousands more) had been locked in libraries' bookcases; special divisions managing the entire organisation had been created; and departments with restricted...

Simultaneous measurement of cross sections for pion production in pp recations at beam momenta of 805.2 MeV/c and 796.0 MeV/c with the TOF spectrometer at the COSY accelerator. / Simultane Bestimmung der Wirkungsquerschnitte von pionenproduzierenden pp-Reaktionen bei Strahlimpulsen von 805,2 MeV/c und 796,0 MeV/c mit dem TOF-Spektrometer am Beschleuniger COSY.

Several boom segments form the crane boom. These segments are often truss structures formed out of circular hollow sections, which are welded together forming the truss joints. A adequate modelling of these truss joints is very important for operational strength and life. Due to the large boom sizes, efficient models are used in the finite element method, generally built of beam elements. These models have problems capturing the proper bending moments working in the truss joints. This is caused by a insufficient portrayal of the joint stiffness. In the literature several modelling techniques with beam elements are proposed, which capture the joint stiffness better. These different modelling methods are implemented in a parametric boom section and compared with a shell element FE model. From this comparison the most appropriate modelling method is selected, which improve the portrayal of internal loads and nominal stresses. With these improved nominal stress values, it is investigated to implement a different fatigue assessment. The structural stress can be calculated from the nominal stress in combination with stress concentration factor (SCF) equations. To implement the structural stress method as fatigue assessment, several modelling and extrapolation methods have been compared. Which lead to a method for evaluating the structural stress in a efficient matter. This method is compared with existing SCF K truss joint equations, from which a new set of SCF equations is derived. These equations are constructed from a larger dataset, hold a wider validity range and fit better with the FE models. When applying these SCF equations with the improved beam modelling method in a boom section, the structural stress is not adequately captured. This is caused by unsymmetrical stressed braces in the K truss joints. Both the modelling methods and SCF equations account for uniformly stressed braces forming the truss joints. More research needs to be conducted to this uneven behaviour. If the structural stress method needs to be implemented with efficient FE models, submodels out of shell elements combined with beam elements are recommended. For fatigue evaluation with the nominal stress method, beam models which account for the local joint flexibility give sufficient realistic results. / Flera kranarmsegment bildar kranarmen. Dessa segment är ofta fackverk utformade av cirkulära ihåliga profiler, som är sammansvetsade och bildar fackverkslederna. En ordentlig modellering av dessa fackförband är mycket viktig för dess driftsstyrka och livslängd. På grund av storleken används finita elementmetoden, vanligtvis uppbyggt av balkelement. Dessa modeller har problem med att beräkna de korrekta böjmomenten som uppstår i fackverkslederna. Detta orsakas av en otillräcklig beskrivning av ledstyvheten. I litteraturen föreslås flera modelleringstekniker med balkelement som tar hänsyn till ledens styvhet bättre. Dessa olika modelleringsmetoder implementeras i en parametrisk kranarmsektion och jämförs med en FE-modell med skalelement. Med denna jämförelse väljs den mest lämpliga modelleringsmetoden, vilket bör förbättra skildringen av interna belastningar och nominella spänningar. Med dessa förbättrade nominella spänningsvärden, undersöks det att genomföra en annan utmattningsbedömning. Den strukturella spänningen kan beräknas utifrån den nominella spänningen i kombination med spänningskoncentrationsfaktor- (SCF) ekvationerna. För att implementera strukturella spänningsmetoden som utmattningsbedömning, har flera modellerings- och extrapoleringsmetoder jämförts. Detta leder till en metod för att utvärdera den strukturella spänningen effektivt. Denna metod jämförs med befintliga SCF-ekvationer, från vilka en ny uppsättning SCF-ekvationer härleds. Dessa ekvationer är konstruerade från en större datauppsättning, har ett bredare giltighetsområde och passar bättre med FE-modellerna. När man applicerar dessa SCF-ekvationer med den förbättrade balkmodelleringsmetoden i en kranarmsektion, uppsamlas strukturella spänningar inte tillräckligt, detta orsakas av ojämna spänningar i diagonalelementen i fackverkslederna. Både modelleringsmetoderna och SCF-ekvationerna tar hänsyn till jämnt spända diagonalelement som uppstår i fackverkslederna. Mer forskning bör göras över detta ojämna beteende. Om den strukturella spänningsmetoden måste implementeras med effektiva FE-modeller, rekommenderas undermodeller av skalelement kombinerade med balkelement. För utmattningsutvärdering med den nominella spänningsmetoden, ger balkmodeller som tar hänsyn till den lokala ledflexibiliteten tillräckligt realistiska resultat.

For creep and shrinkage investigations, relatively small cylindrical specimens are generally exposed to constant climatic conditions. The derived mainly empirical prediction models are used for the calculation of large engineering structures with massive cross-sections. In this paper, the expected values of the material models according to fib Model Code 2010 and Eurocode 2 are compared with monitoring data, which were acquired over a period of more than 12 years during a structural health monitoring of a large viaduct. It was found that in addition to the measured continuous increase in the viscous deformations, seasonal fluctuations due to climatic influences could also be detected. The numerical calculations show that the material models differ significantly in their magnitude and time course of the predicted viscous concrete deformations. In comparison with the monitoring data, a good agreement was achieved when using the material models according to Eurocode 2. The models of the fib Model Code 2010, on the other hand, underestimated the deformations of the massive bridge girder.

No description available.

This PhD study, developed at Universitat Politècnica de València (UPV), aims to cover the first phase of the benchmark released by the expert group on Uncertainty Analysis in Modeling (UAM-LWR). The main contribution to the benchmark, made by the thesis' author, is the development of a MATLAB program requested by the benchmark organizers. This is used to generate neutronic libraries to distribute among the benchmark participants. The UAM benchmark pretends to determine the uncertainty introduced by coupled multi-physics and multi-scale LWR analysis codes. The benchmark is subdivided into three phases: 1. Neutronic phase: obtain collapsed and homogenized problem-dependent cross sections and criticality analyses. 2. Core phase: standalone thermohydraulic and neutronic codes. 3. System phase: coupled thermohydraulic and neutronic code. In this thesis the objectives of the first phase are covered. Specifically, a methodology is developed to propagate the uncertainty of cross sections and other neutronic parameters through a lattice physics code and core simulator. An Uncertainty and Sensitivity (U&S) analysis is performed over the cross sections contained in the ENDF/B-VII nuclear library. Their uncertainty is propagated through the lattice physics code SCALE6.2.1, including the collapse and homogenization phase, up to the generation of problem-dependent neutronic libraries. Afterward, the uncertainty contained in these libraries can be further propagated through a core simulator, in this study PARCSv3.2. The module SAMPLER -available in the latest release of SCALE- and DAKOTA 6.3 statistical tool are used for the U&S analysis. As a part of this process, a methodology to obtain neutronic libraries in NEMTAB format -to be used in a core simulator- is also developed. A code-to-code comparison with CASMO-4 is used as a verification. The whole methodology is tested using a Boiling Water Reactor (BWR) reactor type. Nevertheless, there is not any concern or limitation regarding its use in any other type of nuclear reactor. The Gesellschaft für Anlagen und Reaktorsicherheit (GRS) stochastic methodology for uncertainty quantification is used. This methodology makes use of the high-fidelity model and nonparametric sampling to propagate the uncertainty. As a result, the number of samples (determined using the revised Wilks' formula) does not depend on the number of input parameters but only on the desired confidence and uncertainty of output parameters. Moreover, the output Probability Distribution Functions (PDFs) are not subject to normality. The main disadvantage is that each input parameter must have a pre-defined PDF. If possible, input PDFs are defined using information found in the related literature. Otherwise, the uncertainty definition is based on expert judgment. A second scenario is used to propagate the uncertainty of different thermohydraulic parameters through the coupled code TRACE5.0p3/PARCSv3.0. In this case, a PWR reactor type is used and a transient control rod drop occurrence is simulated. As a new feature, the core is modeled chan-by-chan following a fully 3D discretization. No other study is found using a detailed 3D core. This U&S analysis also makes use of the GRS methodology and DAKOTA 6.3. / Este trabajo de doctorado, desarrollado en la Universitat Politècnica de València (UPV), tiene como objetivo cubrir la primera fase del benchmark presentado por el grupo de expertos Uncertainty Analysis in Modeling (UAM-LWR). La principal contribución al benchmark, por parte del autor de esta tesis, es el desarrollo de un programa de MATLAB solicitado por los organizadores del benchmark, el cual se usa para generar librerías neutrónicas a distribuir entre los participantes del benchmark. El benchmark del UAM pretende determinar la incertidumbre introducida por los códigos multifísicos y multiescala acoplados de análisis de reactores de agua ligera. El citado benchmark se divide en tres fases: 1. Fase neutrónica: obtener los parámetros neutrónicos y secciones eficaces del problema específico colapsados y homogenizados, además del análisis de criticidad. 2. Fase de núcleo: análisis termo-hidráulico y neutrónico por separado. 3. Fase de sistema: análisis termo-hidráulico y neutrónico acoplados. En esta tesis se completan los principales objetivos de la primera fase. Concretamente, se desarrolla una metodología para propagar la incertidumbre de secciones eficaces y otros parámetros neutrónicos a través de un código lattice y un simulador de núcleo. Se lleva a cabo un análisis de incertidumbre y sensibilidad para las secciones eficaces contenidas en la librería neutrónica ENDF/B-VII. Su incertidumbre se propaga a través del código lattice SCALE6.2.1, incluyendo las fases de colapsación y homogenización, hasta llegar a la generación de una librería neutrónica específica del problema. Luego, la incertidumbre contenida en dicha librería puede continuar propagándose a través de un simulador de núcleo, para este estudio PARCSv3.2. Para el análisis de incertidumbre y sensibilidad se ha usado el módulo SAMPLER -disponible en la última versión de SCALE- y la herramienta estadística DAKOTA 6.3. Como parte de este proceso, también se ha desarrollado una metodología para obtener librerías neutrónicas en formato NEMTAB para ser usadas en simuladores de núcleo. Se ha realizado una comparación con el código CASMO-4 para obtener una verificación de la metodología completa. Esta se ha probado usando un reactor de agua en ebullición del tipo BWR. Sin embargo, no hay ninguna preocupación o limitación respecto a su uso con otro tipo de reactor nuclear. Para la cuantificación de la incertidumbre se usa la metodología estocástica Gesellschaft für Anlagen und Reaktorsicherheit (GRS). Esta metodología hace uso del modelo de alta fidelidad y un muestreo no paramétrico para propagar la incertidumbre. Como resultado, el número de muestras (determinado con la fórmula revisada de Wilks) no depende del número de parámetros de entrada, sólo depende del nivel de confianza e incertidumbre deseados de los parámetros de salida. Además, las funciones de distribución de probabilidad no están limitadas a normalidad. El principal inconveniente es que se ha de disponer de las distribuciones de probabilidad de cada parámetro de entrada. Si es posible, las distribuciones de probabilidad de entrada se definen usando información encontrada en la literatura relacionada. En caso contrario, la incertidumbre se define en base a la opinión de un experto. Se usa un segundo escenario para propagar la incertidumbre de diferentes parámetros termo-hidráulicos a través del código acoplado TRACE5.0p3/PARCSv3.0. En este caso, se utiliza un reactor tipo PWR para simular un transitorio de una caída de barra. Como nueva característica, el núcleo se modela elemento a elemento siguiendo una discretización totalmente en 3D. No se ha encontrado ningún otro estudio que use un núcleo tan detallado en 3D. También se usa la metodología GRS y el DAKOTA 6.3 para este análisis de incertidumbre y sensibilidad. / Aquest treball de doctorat, desenvolupat a la Universitat Politècnica de València (UPV), té com a objectiu cobrir la primera fase del benchmark presentat pel grup d'experts Uncertainty Analysis in Modeling (UAM-LWR). La principal contribució al benchmark, per part de l'autor d'aquesta tesi, es el desenvolupament d'un programa de MATLAB sol¿licitat pels organitzadors del benchmark, el qual s'utilitza per a generar llibreries neutròniques a distribuir entre els participants del benchmark. El benchmark del UAM pretén determinar la incertesa introduïda pels codis multifísics i multiescala acoblats d'anàlisi de reactors d'aigua lleugera. El citat benchmark es divideix en tres fases: 1. Fase neutrònica: obtenir els paràmetres neutrònics i seccions eficaces del problema específic, col¿lapsats i homogeneïtzats, a més de la anàlisi de criticitat. 2. Fase de nucli: anàlisi termo-hidràulica i neutrònica per separat. 3. Fase de sistema: anàlisi termo-hidràulica i neutrònica acoblats. En aquesta tesi es completen els principals objectius de la primera fase. Concretament, es desenvolupa una metodologia per propagar la incertesa de les seccions eficaces i altres paràmetres neutrònics a través d'un codi lattice i un simulador de nucli. Es porta a terme una anàlisi d'incertesa i sensibilitat per a les seccions eficaces contingudes en la llibreria neutrònica ENDF/B-VII. La seua incertesa es propaga a través del codi lattice SCALE6.2.1, incloent les fases per col¿lapsar i homogeneïtzar, fins aplegar a la generació d'una llibreria neutrònica específica del problema. Després, la incertesa continguda en la esmentada llibreria pot continuar propagant-se a través d'un simulador de nucli, per a aquest estudi PARCSv3.2. Per a l'anàlisi d'incertesa i sensibilitat s'ha utilitzat el mòdul SAMPLER -disponible a l'última versió de SCALE- i la ferramenta estadística DAKOTA 6.3. Com a part d'aquest procés, també es desenvolupa una metodologia per a obtenir llibreries neutròniques en format NEMTAB per ser utilitzades en simuladors de nucli. S'ha realitzat una comparació amb el codi CASMO-4 per obtenir una verificació de la metodologia completa. Aquesta s'ha provat utilitzant un reactor d'aigua en ebullició del tipus BWR. Tanmateix, no hi ha cap preocupació o limitació respecte del seu ús amb un altre tipus de reactor nuclear. Per a la quantificació de la incertesa s'utilitza la metodologia estocàstica Gesellschaft für Anlagen und Reaktorsicherheit (GRS). Aquesta metodologia fa ús del model d'alta fidelitat i un mostreig no paramètric per propagar la incertesa. Com a resultat, el nombre de mostres (determinat amb la fórmula revisada de Wilks) no depèn del nombre de paràmetres d'entrada, sols depèn del nivell de confiança i incertesa desitjats dels paràmetres d'eixida. A més, las funcions de distribució de probabilitat no estan limitades a la normalitat. El principal inconvenient és que s'ha de disposar de les distribucions de probabilitat de cada paràmetre d'entrada. Si és possible, les distribucions de probabilitat d'entrada es defineixen utilitzant informació trobada a la literatura relacionada. En cas contrari, la incertesa es defineix en base a l'opinió d'un expert. S'utilitza un segon escenari per propagar la incertesa de diferents paràmetres termo-hidràulics a través del codi acoblat TRACE5.0p3/PARCSv3.0. En aquest cas, s'utilitza un reactor tipus PWR per simular un transitori d'una caiguda de barra. Com a nova característica, cal assenyalar que el nucli es modela element a element seguint una discretizació totalment 3D. No s'ha trobat cap altre estudi que utilitze un nucli tan detallat en 3D. També s'utilitza la metodologia GRS i el DAKOTA 6.3 per a aquesta anàlisi d'incertesa i sensibilitat.¿ / Mesado Melia, C. (2017). Uncertainty Quantification and Sensitivity Analysis for Cross Sections and Thermohydraulic Parameters in Lattice and Core Physics Codes. Methodology for Cross Section Library Generation and Application to PWR and BWR [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86167

Les sections efficaces neutroniques des noyaux de courte durée de vie sont des données cruciales pour la physique fondamentale et appliquée dans des domaines tels que la physique des réacteurs ou l’astrophysique nucléaire. En général, l’extrême radioactivité de ces noyaux ne nous permet pas de procéder à des mesures induites par neutrons. Cependant, il existe une méthode de substitution (« surrogate » dans la littérature) qui permet de déterminer ces sections efficaces neutroniques par l’intermédiaire de réactions de transfert ou de réactions de diffusion inélastique. Son intérêt principal est de pouvoir utiliser des cibles moins radioactives et ainsi d’accéder à des sections efficaces neutroniques qui ne pourraient pas être mesurées directement. La méthode est basée sur l’hypothèse de formation d’un noyau composé et sur le fait que la désexcitation ne dépend essentiellement que de l’énergie d’excitation et du spin et parité de l'état composé peuplé. Toutefois, les distributions de moments angulaires et parités peuplés dans des réactions de transfert et celles induites par neutrons sont susceptibles d’être différentes. Ce travail fait l’état de l’art sur la méthode substitution et sa validité. En général, la méthode de substitution fonctionne très bien pour extraire des sections efficaces de fission. Par contre, la méthode de substitution dédiée à la capture radiative est mise à mal par la comparaison aux réactions induites par neutrons. Nous avons réalisé une expérience afin de déterminer les probabilités de désexcitation gamma du 176Lu et du 173Yb à partir des réactions de substitution 174Yb(3He,p)176Lu* et 174Yb(3He,alpha)173Yb*, respectivement, et nous les avons comparées avec les probabilités de capture radiative correspondantes aux réactions 175Lu(n,gamma) et 172Yb(n,gamma) qui sont bien connues. Cette expérience a permis de comprendre pourquoi, dans le cas de la désexcitation gamma, la méthode de substitution donne des écarts importants par rapport à la réaction neutronique correspondante. Ce travail dans la région de terres rares a permis d'évaluer dans quelle mesure la méthode de substitution peut s’appliquer pour extraire des probabilités de capture dans la région des actinides. Des expériences précédentes sur la fission ont aussi pu être réinterprétées. Ce travail apporte donc un éclairage nouveau sur la méthode de substitution. / Neutron-induced cross sections of short-lived nuclei are needed for fundamental and applied physics as nuclear energy or astrophysics. However, very often the high radioactivity of the samples makes the direct measurement of these cross sections extremely difficult. The surrogate reaction method is an indirect way of determining neutron-induced cross sections through transfer or inelastic scattering reactions. This method presents the advantage that in some cases the target material is stable or less radioactive than the material required for a neutron-induced measurement. The method is based on the hypothesis that the excited nucleus is a compound nucleus whose decay depends essentially on its excitation energy and on the spin and parity state of the populated compound state. Nevertheless, the spin and parity population differences between the compound-nuclei produced in the neutron and transfer-induced reactions may be different. This work reviews the surrogate method and its validity. Neutron-induced fission cross sections obtained with the surrogate method are in general good agreement. However, it is not yet clear to what extent the surrogate method can be applied to infer radiative capture cross sections. We performed an experiment to determine the gamma-decay probabilities for 176Lu and 173Yb by using the surrogate reactions 174Yb(3He,p)176Lu* and 174Yb(3He,alpha)173Yb*, respectively, and compare them with the well-known corresponding probabilities obtained in the 175Lu(n,gamma) and 172Yb(n,gamma) reactions. This experiment provides answers to understand why, in the case of gamma-decay, the surrogate method gives significant deviations compared to the corresponding neutron-induced reaction. In this work, we have also assessed whether the surrogate method can be applied to extract capture probabilities in the actinide region. Previous experiments on fission have also been reinterpreted. Thus, this work provides new insights into the surrogate method.

Während die Bestechung und Bestechlichkeit von, in öffentlichen Krankenhäusern angestellten Ärzten, als Folge des „Herzklappenskandals“ und der darauf beruhenden Reform des Korruptionsstrafrechts bereits seit 1997 nach den §§ 331 ff. StGB strafbar sind, unterfielen niedergelassene Vertragsärzte auch nach der Rechtsprechung des Großen Strafsenats bis zum Inkrafttreten der §§ 299a ff. StGB am 04.06.2016 nicht den Korruptionsdelikten. Thematisch damit verbunden war und ist die Frage, ob Vorteilsgewährungspraktiken in diesem Bereich vom Tatbestand der Untreue erfasst sein könnten. Ihrer Beantwortung dient der erste Teil der Arbeit. Der zweite Teil fokussiert die Relevanz der Korruptionsvorschriften für das gewählte Arbeitsthema. Die Einbettung der Gesamtthematik in den Kontext der Korruptionsdelikte führt die Ausgangsbetrachtungen zur Untreue fort und ergänzt diese durch eine Bewertung nach den neuen Gesetzesregelungen. Das gewählte Arbeitsthema zeigt, wie wesentlich die Beschäftigung mit den relevanten Normen des Rechts der Gesetzlichen Krankenversicherung für die strafrechtlichen Bewertungen in diesem Bereich ist. Dies gilt umso mehr, wenn mit sozial- und beziehungsweise oder berufsrechtlichen Verstößen strafrechtliche Konsequenzen einhergehen und die fehlerhafte Anwendung der einschlägigen Rechtsnormen anderer Rechtsbereiche zwangsläufig auch zu falschen strafrechtlichen Schlussfolgerungen führt. Dieser Kritik sieht sich auch die Rechtsprechung des Bundesgerichtshofes zur sogenannten Vertragsarztuntreue ausgesetzt. Auch hier wurden die Besonderheiten des Sozialversicherungsrechts nicht mit der notwendigen Sorgfalt eruiert und stattdessen eine - seit mehreren Jahren - nicht mehr vertretene Rechtsprechung des Bundessozialgerichts zur Grundlage der strafrechtlichen Bewertungen gemacht. Dass dies weder den Anforderungen des Bundesverfassungsgerichts entspricht, noch mit den sozial- und strafrechtlichen Vorgaben vereinbar ist, zeigen die Ausführungen der Arbeit. In der Form eines kritischen Ausblicks werden abschließend, die Grenzen zulässiger verordnungsbezogener Vergütungen durch die Krankenkassen aufgezeigt und deren strafrechtliche Relevanz eingeordnet. Letzteres erfolgt am Beispiel eines Vertrags zur Förderung sog. biosimilarer Arzneimittel durch die Zahlung einer prozentualen Einsparbeteiligung als Gegenleistung für deren bevorzugte Verordnung. Die Konstellation verdeutlicht, dass auch die monetäre Einflussnahme der Krankenkassen auf das Verordnungsverhalten der Vertragsärzte strafrechtsrelevante Wirkung haben kann, wenn sie zu unberechtigten Wettbewerbsverzerrungen führt. / As a consequence of the so-called “heart valve scandal”, and the reform of the German criminal law on corruption that followed in the wake of the scandal, it has been a criminal offence under sections 331 et seqq. of the German Criminal Code [Strafgesetzbuch – StGB] since 1997 to give bribes to medical practitioners employed in public hospitals, or for such medical practitioners to take bribes. However, until sections 299a et seqq. StGB entered into force on 4 June 2016, acts committed by medical practitioners in private practices were not deemed to be corruption offences under the Criminal Code. This was also affirmed by the case-law of the Grand Criminal Panel of the German Federal Court of Justice [Großer Senat für Strafsachen]. A topic that has been repeatedly discussed in connection with the aforementioned issue is whether the practice of granting benefits in healthcare might constitute an offence of embezzlement. The first part of this dissertation provides an answer to that question. The second part focuses on the significance that corruption provisions have for the topic discussed herein. Following the initial analysis of the issue of embezzlement mentioned, this issue is expanded by a discussion of the overall topic in the context of corruption offences, supplemented by an assessment of the topic in the light of new legislation introduced. An analysis of the topic chosen for this dissertation shows how important it is to study the relevant legal provisions of the law on statutory health insurance in order to be able to carry out an assessment of the topic from the perspective of criminal law. This applies all the more so in cases where a breach of social law and/or the law of professional rules and regulations might have consequences under criminal law, and the faulty application of applicable legal rules from legal areas outside criminal law would inevitably also lead to wrong conclusions being drawn on the basis of criminal law. The case-law of the German Federal Court of Justice [Bundesgerichtshof] on so-called “embezzlement by medical practitioners in private practice” [Vertragsarztuntreue] has been criticised in this respect. The Federal Court of Justice did not take account of the specifics of German social security law in a sufficiently diligent manner, and instead used outdated case-law of the German Federal Social Court [Bundessozialgericht] as a basis for its criminal-law assessment—precedents that were overruled by the Federal Social Court itself many years ago. This dissertation shows that this does not meet the requirements of the German Federal Constitutional Court [Bundesverfassungsgericht] and that such an approach is incompatible with requirements under social and criminal law. Finally, the limits of admissible prescription-related remuneration by health insurances are discussed and demonstrated from a critical, future-oriented perspective, together with the significance these limits have from a criminal law perspective. The significance of such limits is discussed using as an example a selective-agreement model designed to promote so-called “biosimilar medicines” by paying medical practitioners a percentage of the savings achieved in return for practitioners prescribing such medicines rather than more expensive ones. The circumstances discussed illustrate that the monetary influence that health insurances exert over the way in which medical practitioners in private practice prescribe such things as medicines may have consequences under criminal law if such influence may lead to competition being distorted. In the light of the above, health insurances should not be provided with additional criminal-law-related exceptional provisions that would enable them to exert further influence over the neutrality of decision-making in the area of medical prescriptions.