This thesis describes the development and use of a new class of molecular tools called Selector probes, and its potential for investigations of genetic variation. The Selector technology provides multiplex amplification of targeted DNA sequences with a high specificity, and an enrichment factor in the same order of magnitude as PCR. A common feature in this thesis work is to focus the analysis on DNA regions of interest. For example, this technique can be implemented in analysing candidate regions found by whole genome studies that need validation (global to local analysis), and applications requiring detection of rare alleles (common to rare allele), important in for example cancer samples. An assay is presented that allows for fast and simple quantification of relative copy-number variations. The method was proven to be able to detect aneuploidy in chromosome 13, 18, 21 and X, with a resolution enough to distinguish between 4 and 5 copies. The method was successfully applied to solve a biological question regarding a copy-number variation, that explains the Ridge phenotype typical for the dog bread Rhodesian Ridgebacks. The Selector strategy was able to detect and map a tandem duplication with a size of 133 kb, which was characterized with base-pair resolution. A readout platform that facilitates simultaneous digital quantitative analysis of a large numbers of biomolecules is further introduced. The work involves arraying amplified product from successful selection and decoding each molecule by hybridization of fluorophore labeled oligonucleotides. Finally, a genome partitioning method which is applied upstream of next generation sequencing platforms is presented. It is shown that the method provides successful enrichment with 98 % coverage and 94 % specificity and high enrichment uniformity. The technique was applied for mutation analysis of 26 cancer-related genes in tumor cell-lines and tissue.

Semiconductor quantum dots (QDs) have emerged as a new class of fluorescent probes and labeling agents for biological samples. QDs are bright, highly photostable and allow simultaneous excitation of multiple emissions. Owing to these properties, QDs hold exceptional promise in enabling intracellular biochemical studies and diagnosis with unprecedented sensitivity and accuracy. However, use of QD probes inside living cells remains a challenge due to difficulties in delivery of nanoparticles without causing aggregation and imaging single nanoparticles inside living cells. In this dissertation, a systematic approach to deliver, image and locate single QDs inside living cells is presented and the properties of molecular motor protein driven QD transport are studied. First, spectroscopic and imaging methods capable of differentiating single nanoparticles from the aggregates were developed. These technologies were validated by differentiating surface protein expression on viral particles and by enabling rapid counting of single biomolecules. Second, controlled delivery of single QDs into living cells is demonstrated. A surprising finding is that single QDs associate non-specifically with the dynein motor protein complex and are transported to the microtubule organizing center. Accurate localization and tracking of QDs inside cell cytoplasm revealed multiple dynein motor protein attachment resulting in increased velocity of the QDs. Further, spectrin molecule which is known to recruit dynein motor protein complex to phospholipid micelles was found to associate with the QDs. These results may serve as a benchmark for developing new QD surface coatings suitable for intracellular applications. Since, nanoparticles are similar in size to viral pathogens; better understanding of nanoparticle-cell interactions should also help engineer nanoparticle models to study virus-host cell interactions. (Contains AVI format multimedia files)

Single-molecule force spectroscopy (SMFS) with atomic force microscope (AFM) has advanced our knowledge of the mechanical aspects of biological processes, and helped us take big strides in the hitherto unexplored areas of protein (un)folding. One such virgin land is that of membrane proteins, where the advent of AFM has not only helped to visualize the difficult to crystallize membrane proteins at the single-molecule level, but also given a new perspective in the understanding of the interplay of molecular interactions involved in the construction of these molecules. My PhD work was tightly focused on exploiting this sensitive technique to decipher the intra- and intermolecular interactions in membrane proteins, using bacteriorhodopsin and bovine rhodopsin as model systems. Using single-molecule unfolding measurements on different bacteriorhodopsin oligomeric assemblies - trimeric, dimeric and monomeric - it was possible to elucidate the contribution of intra- and interhelical interactions in single bacteriorhodopsin molecules. Besides, intriguing insights were obtained into the organization of bacteriorhodopsin as trimers, as deduced from the unfolding pathways of the proteins from different assemblies. Though the unfolding pathways of bacteriorhodopsin from all the assemblies remained the same, the different occurrence probability of these pathways suggested a kinetic stabilization of bacteriorhodopsin from a trimer compared to that existing as a monomer. Unraveling the knot of a complex G-protein coupled receptor, rhodopsin, showed the existence of two structural states, a native, functional state, and a non-native, non-functional state, corresponding to the presence or absence of a highly conserved disulfide bridge, respectively. The molecular interactions in absence of the native disulfide bridge mapped onto the three-dimensional structure of native rhodopsin gave insights into the molecular origin of the neurodegenerative disease retinitis pigmentosa. This presents a novel technique to decipher molecular interactions of a different conformational state of the same molecule in the absence of a high-resolution X-ray crystal structure. Interestingly, the presence of ZnCl2 maintained the integrity of the disulfide bridge and the nature of unfolding intermediates. Moreover, the increased mechanical and thermodynamic stability of rhodopsin with bound zinc ions suggested a plausible role for the bivalent ion in rhodopsin dimerization and consequently signal transduction. Last but not the least, I decided to dig into the mysteries of the real mechanisms of mechanical unfolding with the help of well-chosen single point mutations in bacteriorhodopsin. The monumental work has helped me to solve some key questions regarding the nature of mechanical barriers that constitute the intermediates in the unfolding process. Of particular interest is the determination of altered occurrence probabilities of unfolding pathways in an energy landscape and their correlation to the intramolecular interactions with the help of bioinformatics tools. The kind of work presented here, in my opinion, will not only help us to understand the basic principles of membrane protein (un)folding, but also to manipulate and tune energy landscapes with the help of small molecules, proteins, or mutations, thus opening up new vistas in medicine and pharmacology. It is just a matter of a lot of hard work, some time, and a little bit of luck till we understand the key elements of membrane protein (un)folding and use it to our advantage.

The atomic force microscope (AFM) provides a powerful instrument for investigating and manipulating biological samples down to the subnanometer scale. In contrast to other microscopy methods, AFM does not require labeling, staining, nor fixation of samples and allows the specimen to be fully hydrated in buffer solution during the experiments. Moreover, AFM clearly compares in resolution to other techniques. In general, the AFM can be operated in an imaging or a force spectroscopy mode. In the present work, advantage was taken of this versatility to investigate single biomolecules and biomolecular assemblies. A novel approach to investigate the visco-elastic behavior of biomolecules under force was established, using dextran as an example. While a molecule tethered between a solid support and the cantilever tip was stretched at a constant velocity, the thermally driven oscillation of the cantilever was recorded. Analysis of the cantilever Brownian noise provided information about the visco-elastic properties of dextran that corresponded well to parameters obtained by alternative methods. However, the approach presented here was easier to implement and less time-consuming than previously used methods. A computer controlled force-clamp system was set up, circumventing the need for custom built analogue electronics. A commercial PicoForce AFM was extended by two computers which hosted data acquisition hardware. While the first computer recorded data, the second computer drove the AFM bypassing the manufacturer's microscope control software. To do so, a software-based proportional-integral-differential (PID) controller was implemented on the second computer. It allowed the force applied to a molecule to be held constant over time. After tuning of the PID controller, response times obtained using that force-clamp setup were comparable to those of the recently reported analogue systems. The performance of the setup was demonstrated by force-clamp unfolding of a pentameric Ig25 construct and the membrane protein NhaA. In the latter case, short-lived unfolding intermediates that were populated for less than 10 ms, could be revealed. Conventional single-molecule dynamic force spectroscopy was used to unfold the serine:threonine antiporter SteT from Bacillus subtilis, an integral membrane protein. Unfolding force patterns revealed the unfolding barriers stabilizing structural segments of SteT. Ligand binding did not induce new unfolding barriers suggesting that weak interactions with multiple structural segments were involved. In contrast, ligand binding caused changes in the energy landscape of all structural segments, thus turning the protein from a brittle, rigid into a more stable, structurally flexible conformation. Functionally, rigidity in the ligand-free state was thought to facilitate specific ligand binding, while flexibility and increased stability were required for conformational changes associated with substrate translocation. These results support the working model for transmembrane transport proteins that provide alternate access of the binding site to either face of the membrane. Finally, high-resolution imaging was exploited to visualize the extracellular surface of Cx26 gap junction hemichannels (connexons). AFM topographs reveal pH-dependent structural changes of the extracellular connexon surface in presence of HEPES, an aminosulfonate compound. At low pH (< 6.5), connexons showed a narrow and shallow channel entrance, which represented the closed pore. Increasing pH values resulted in a gradual opening of the pore, which was reflected by increasing channel entrance widths and depths. At pH > 7.6 the pore was fully opened and the pore diameter and depth did not increase further. Importantly, coinciding with pore gating a slight rotation of the subunits was observed. In the absence of aminosulfonate compounds, such as HEPES, acidification did not affect pore diameters and depths, retaining the open state. Thus, the intracellular concentration of taurine, a naturally abundant aminosulfonate compound, might be used to tune gap junction sensitivity at low pH.

Photo-induced charge transfer which occurs between molecules or different parts of a large molecule is the pivotal process related to performances of organic electronics. In particular, injection of charge carriers into conjugated polymers and dissociation of photo-generated excitons at the heterojunction between a donor and acceptor system are of great importance in determining the luminescence efficiency of organic light emitting diodes (OLEDs) and solar energy conversion efficiency of organic solar cells, respectively. However, the complex nature of organic semiconductors as well as complicated primary processes involved in the functioning of these devices have prevented us from understanding unique characteristics of these processes and thereby engineering better materials for higher performances. In this dissertation, two different types of photo-induced (or -related) charge transfer processes occurring in organic semiconductors were investigated by using single molecule spectroscopy (SMS) techniques to unravel the complexities of these processes. The carefully designed functioning capacitor-like model devices similar to OLEDs and photovoltaic cells were fabricated where isolated single nanoparticles were introduced as an active medium to mitigate the complexities of these materials. We observed that injection of positively charged carriers (holes) into poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) single nanoparticles from the carbazole hole transport layer does not occur in the absence of light. We denoted the observed hole injection in aid of light as the light-induced hole transfer mechanism (LIHT). It was revealed that the charging dynamics are highly consistent with a cooperative charging effect. In addition, the LIHT was proposed as the possible source for the formation of deep trapped hole in organic devices. Local exciton dissociation yields across a nanostructured domain between poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) single nanoparticles and either poly(9,9- dioctylfluorene - co - bis-N,N- (4 -butylphenyl)-bis-N,N-phenyl-1,4-phenylene diamine) (PFB) or poly(9,9-dioctylfluorene-co-N-(4-butylphenyl)diphenylamine) (TFB) film in model photovoltaic devices was also investigated. A wide distribution of exciton dissociation yields was observed from each nanodomain due to the device geometry. The observed hysteresis in fluorescence voltage curve was ascribed to accumulated charges following charge separations. The dynamics of charge separation under the applied electric field was described in more detail. / text

Die molekulare Elektronik setzt sich zum Ziel, passive und aktive Bausteine in integrierten Schaltkreisen auf molekularer Ebene zu realisieren. Dabei ist entscheidend, dass sich der elektrische Leitwert der molekularen Bauelemente hinreichend regulieren lässt. Um zu belegen, dass dies möglich ist, wird in dieser Dissertation die gezielte Leitwertkontrolle einzelner über Nanoelektroden kontaktierter Moleküle nachgewiesen. Die erzielten Ergebnisse ergänzen dabei nahtlos aktuellste Studien. Zum einen werden kontaktierte molekulare Schalter durch Bestrahlung mit Licht einer bestimmten Wellenlänge in-situ von einem nicht-leitenden in einen leitenden Zustand geschaltet, wobei der Einfluss unterschiedlicher Seitengruppen für eine zusätzliche Modifikation des Leitwerts sorgt. Ausschlaggebend ist hierbei die elektronische Anbindung des Moleküls an die Elektroden. Zum anderen werden Molekül-Metall-Komplexe durch die Einbindung eines Übergangsmetallions von einem isolierenden in einen leitenden Zustand versetzt. In diesem Fall lässt sich der leitende Zustand durch die Wahl des Ions innerhalb einer Größenordnung variieren, was eine völlig neue Möglichkeit der Leitwertkontrolle in molekularen Bausteinen darstellt. Das Ion bestimmt dabei sowohl die mechanische Stabilität als auch die elektronische Struktur des Moleküls. Für die Kontaktierung einzelner Moleküle kommt die Technik des mechanisch kontrollierten Bruchkontakts zum Einsatz. So lassen sich feine Goldnanoelektroden herstellen, an die Moleküle anbinden. Um eine präzise Analyse durchzuführen, werden über zwei unabhängige Messstrategien Informationen über das elektrische Transportverhalten sowie über die elektronische Struktur der Moleküle erworben. In dieser Arbeit sind echte Neuentwicklungen auf dem Gebiet der molekularen Elektronik gelungen, die einen wesentlichen Beitrag für die Umsetzung integrierter molekularer Schaltkreise leisten.

No description available.

Genomic DNA is the template of life - the entity which is characterized by a self-sustaining anatomical development, regulated signaling processes, the ability to reproduce and to respond to stimuli. Through what is classically known as the central dogma, the genome is transcribed into mRNA, which in turn is translated into proteins. The proteins take part in most, if not all, cellular processes, and it is by unraveling these processes that we can begin to understand life and disease-causing mechanisms. In vitro and in vivo assays are two levels at which protein communication may be studied, and which permit manipulation and control over the proteins under investigation. But in order to retrieve a representation of the processes as close to reality as possible, in situ analysis may instead be applied as a complement to the other two levels of study. In situ PLA offers the ability to survey protein activity in tissue samples and primary cell lines, at a single cell level, detecting single targets in their natural unperturbed environment.   In this thesis new developments of the in situ PLA are described, along with a new technique offering in situ enzyme-free detection of proximity between biomolecules. The dynamic range of in situ PLA has now been increased by several orders of magnitude to cover analogous ranges of protein expression; the output signals have been modified to offer a greater signal-to-noise ratio and to limit false-positive-rates while also extending the dynamic range further; simultaneous detection of multiple protein complexes is now possible; proximity-HCR is presented as a robust and inexpensive enzyme-free assay for protein complex detection. The thesis also covers descriptions on how the techniques may be simultaneously applied, also together with other techniques, for the multiple data-point acquisition required by the emerging realm of systems biology. A future perspective is presented for how much more information may be simultaneously acquired from tissue samples to describe biomolecular interactions in a new manner. This will allow new types of biomarkers and drugs to be discovered, and a new holistic understanding of life.

Each organism has to maintain the integrity of its genetic code, which is stored in its DNA. This is achieved by strongly controlled and regulated cellular processes such as DNA replication, -repair and -recombination. An essential element of these processes is the unwinding of the duplex strands of the DNA helix. This biochemical reaction is catalyzed by helicases that use the energy of nucleoside triphophate (NTP) hydrolysis. Although all helicases comprise highly conserved domains in their amino acid sequence, they exhibit large variations regarding for example their structure, their function and their target nucleic acid structures. The main objective of this thesis is to obtain insight into the DNA unwinding mechanisms of three helicases from two different organisms. These helicase vary in their structures and are involved in different pathways of DNA metabolism. In particular the replicative, hexameric helicase Large Tumor-Antigen (T-Antigen) from Simian virus 40 and the DNA repair helicases RecQ2 and RecQ3 from Arabidopsis thaliana are studied. To observe DNA unwinding by these helicases in real-time on the single molecule level, a biophysical technique, called magnetic tweezers, was applied. This technique allows to stretch single DNA molecules attached to magnetic particles. Simultaneously one can measure the DNA end-to-end distance. Special DNA hairpin templates allowed to characterize different parameters of the DNA unwinding reaction such as the unwinding velocity, the length of unwound DNA (processivity) or the influence of forces. From this mechanistic models about the functions of the helicases could be obtained. T-Antigen is found to be one of the slowest and most processive helicases known so far. In contrast to prokaryotic helicases, the unwinding velocity of T-Antigen shows a weak dependence on the applied force. Since current physical models for the unwinding velocity fail to describe the data an alternative model is developed. The investigated RecQ helicases are found to unwind and close short stretches of DNA in a repetitive fashion. This activity is shown for the first time under external forces. The experiments revealed that the repetitive DNA unwinding is based on the ability of both enzymes to switch from one single DNA strand to the other. Although RecQ2 and RecQ3 perform repetitive DNA unwinding, both enzymes differ largely in the measured DNA unwinding properties. Most importantly, while RecQ2 is a classical helicase that unwinds DNA, RecQ3 mostly rewinds DNA duplexes. These different properties may reflect different specific tasks of the helicases during DNA repair processes. To obtain high spatial resolution in DNA unwinding experiments, the experimental methods were optimized. An improved and more stable magnetic tweezers setup with sub-nanometer resolution was built. Additionally, different methods to prepare various DNA templates for helicase experiments were developed. Furthermore, the torsional stability of magnetic particles within an external field was investigated. The results led to selection rules for DNA-microsphere constructs that allow high resolution measurements. / Jeder Organismus ist bestrebt, die genetischen Informationen intakt zu halten, die in seiner DNA gespeichert sind. Dies wird durch präzise gesteuerte zelluläre Prozesse wie DNA-Replikation, -Reparatur und -Rekombination verwirklicht. Ein wesentlicher Schritt ist dabei das Entwinden von DNA-Doppelsträngen zu Einzelsträngen. Diese chemische Reaktion wird von Helikasen durch die Hydrolyse von Nukleosidtriphosphaten katalysiert. Obwohl bei allen Helikasen bestimmte Aminosäuresequenzen hoch konserviert sind, können sie sich in Eigenschaften wie Struktur, Funktion oder DNA Substratspezifität stark unterscheiden. Gegenstand der vorliegenden Arbeit ist es, die Entwindungsmechanismen von drei verschieden Helikasen aus zwei unterschiedlichen Organismen zu untersuchen, die sich in ihrer Struktur sowie ihrer Funktion unterscheiden. Es handelt sich dabei um die replikative, hexamerische Helikase Large Tumor-Antigen (T-Antigen) vom Simian-Virus 40 und die DNA-Reparatur-Helikasen RecQ2 und RecQ3 der Pflanze Arabidopsis thaliana. Um DNA-Entwindung in Echtzeit zu untersuchen, wird eine biophysikalische Einzelmolekültechnik, die \"Magnetische Pinzette\", verwendet. Mit dieser Technik kann man ein DNA-Molekül, das an ein magnetisches Partikel gebunden ist, strecken und gleichzeitig dessen Gesamtlänge messen. Mit speziellen DNA-Konstrukten kann man so bestimmte Eigenschaften der Helikasen bei der DNA-Entwindung, wie z.B. Geschwindigkeit, Länge der entwundenen DNA (Prozessivität) oder den Einfluß von Kraft, ermitteln. Es wird gezeigt, dass T-Antigen eine der langsamsten und prozessivsten Helikasen ist. Im Gegensatz zu prokaryotischen Helikasen ist die Entwindungsgeschwindigkeit von T-Antigen kaum kraftabhängig. Aktuelle Modelle sagen dieses Verhalten nicht vorraus, weshalb ein alternatives Modell entwickelt wird. Die untersuchten RecQ-Helikasen zeigen ein Entwindungsverhalten bei dem permanent kurze Abschnitte von DNA entwunden und wieder zusammengeführt werden. Dieses Verhalten wird hier zum ersten Mal unter dem Einfluß externer Kräfte gemessen. Es wird gezeigt, dass die permanente Entwindung auf die Fähigkeit beider Helikasen, von einem einzelen DNA-Strang auf den anderen zu wechseln, zurückzuführen ist. Obwohl RecQ2 und RecQ3 beide das Verhalten des permanenten Entwindens aufzeigen, unterscheiden sie sich stark in anderen Eigenschaften. Der gravierendste Unterschied ist, dass RecQ2 wie eine klassische Helikase die DNA entwindet, während RecQ3 eher bestrebt ist, die DNA-Einzelstränge wieder zusammenzuführen. Die unterschiedlichen Eigenschaften könnten die verschieden Aufgaben beider Helikasen während DNA-Reparaturprozessen widerspiegeln. Weiterhin werden die experimentellen Methoden optimiert, um möglichst hohe Auflösungen der Daten zu erreichen. Dazu zählen der Aufbau einer verbesserten und stabileren \"Magnetischen Pinzette\" mit sub-nanometer Auflösung und die Entwicklung neuer Methoden, um DNA Konstrukte herzustellen. Außerdem wird die Torsions\\-steifigkeit von magnetischen Partikeln in externen magnetischen Feldern untersucht. Dabei finden sich Auswahlkriterien für DNA-gebundene magnetische Partikel, durch die eine hohe Auflösung erreicht wird.

Die vorliegende Promotionsarbeit “Density functional study of the electronic and magnetic properties of selected transition metal complexes” beschäftigt sich mit dem Zusammenhang zwischen strukturellen Merkmalen sowie elektronischen und magnetischen Eigenschaften von Einzelmolekül-Magneten. Im Wesentlichen konnte dabei gezeigt werden, dass die magnetischen Eigenschaften sowohl von strukturellen Merkmalen als auch von den elektronischen Eigenschaften bestimmt werden. Des Weiteren ergab sich, dass verschiedene Kenngrößen der magnetischen Eigenschaften (im speziellen der magnetische Grundzustand S sowie die magnetische Anisotropie D) miteinander korreliert sind. Dies ist im Besonderen für eine mögliche Anwendung von Einzelmolekül-Magneten im Bereich der Datenspeicherung von Bedeutung.