The thesis outlines possible medical applications of soft matter assemblies as nanotechnology based systems as well as their potential in the emerging field of nanomedicine. Nanomedicine can be defined as the investigation area encompassing the design of diagnostics and therapeutics at the nanoscale, including nanobots, nanobiosensors, nanoparticles and other nanodevices, for the remediation, prevention and diagnosis of a variety of illnesses. The ultimate goal of nanomedicine is to improve patient quality-of-life. Because nanomedicine includes the rational design of an enormous number of nanotechnology-based products focused on miscellaneous diseases, a variety of nanomaterials can be employed. Therefore, the thesis is driven by a focus on recent advances in the manufacture of soft matter-based nanomedicines specifically designed to improve cancer diagnostics and chemotherapy efficacy. It will in particular highlight liposomes, polymer-drug conjugates, drug- loaded block copolymer micelles and biodegradable polymeric nanoparticles, emphasizing the current investigations and potential novel approaches towards overcoming the remaining challenges in the field as well as a brief overview of formulations that are in clinical trials and marketed products. Based on vehicle-related and...

In this work, stretchable magnetic sensorics is successfully established by combining metallic thin films revealing a giant magnetoresistance effect with elastomeric materials. Stretchability of the magnetic nanomembranes is achieved by specific morphologic features (e.g. wrinkles), which accommodate the applied tensile deformation while maintaining the electrical and magnetic integrity of the sensor device. The entire development, from the demonstration of the world-wide first elastically stretchable magnetic sensor to the realization of a technology platform for robust, ready-to-use elastic magnetoelectronics with fully strain invariant properties, is described. The prepared soft giant magnetoresistive devices exhibit the same sensing performance as on conventional rigid supports, but can be stretched uniaxially or biaxially reaching strains of up to 270% and endure over 1,000 stretching cycles without fatigue. The comprehensive magnetoelectrical characterization upon tensile deformation is correlated with in-depth structural investigations of the sensor morphology transitions during stretching. With their unique mechanical properties, the elastic magnetoresistive sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. This feature leads electronic skin systems beyond imitating the characteristics of its natural archetype and extends their cognition to static and dynamic magnetic fields that by no means can be perceived by human beings naturally. Various application fields of stretchable magnetoelectronics are proposed and realized throughout this work. The developed sensor platform can equip soft electronic systems with navigation, orientation, motion tracking and touchless control capabilities. A variety of novel technologies, like smart textiles, soft robotics and actuators, active medical implants and soft consumer electronics will benefit from these new magnetic functionalities.

Les méthodes d'imagerie et de vélocimétrie ultrasonores ont prouvé leur efficacité pour étudier des matériaux divers. À haute intensité, il est connu que les ultrasons exercent des forces stationnaires dans les fluides newtoniens, par le biais d'effets non linéaires comme la pression de radiation acoustique. Néanmoins, ces effets n'ont encore jamais été exploités d'un point de vue fondamental dans le contexte de la physique des matériaux mous. L'objet de cette thèse est d'exploiter l'interaction d'ultrasons de puissance avec des matériaux bloqués afin de sonder activement, voire d'influencer leurs propriétés mécaniques. Nous proposons tout d'abord une méthode de microrhéologie active : la « mésorhéologie acoustique ». En analysant le mouvement d'un intrus sous l'effet de la pression de radiation acoustique, nous caractérisons localement la rhéologie du matériau étudié. Nous mettons cette technique en œuvre avec un fluide à seuil simple : un microgel de carbopol. Nous exploitons les résultats obtenus à la lumière d'une caractérisation rhéologique poussée du comportement de ce matériau en dessous de son seuil d'écoulement et proposons diverses pistes d'amélioration du dispositif.Ensuite, nous décrivons la mise en écoulement d'un empilement granulaire immergé par des ultrasons intenses focalisés et comparons les observations aux résultats de simulations de dynamique moléculaire. La transition de fluidification observée car l'injection d'énergie y est discontinue. Elle est intermittente et hystérétique, propriétés reproduites par des simulations numériques et dont un modèle phénoménologique simple permet de rendre compte.Enfin, en remplaçant le plan d'un rhéomètre classique par un transducteur ultrasonore, nous mesurons l'effet de vibrations à haute fréquence sur les propriétés mécaniques d'un gel colloïdal fragile de noir de carbone. Nous observons un effet significatif et potentiellement irréversible des ultrasons sur le module élastique et sur la mise en écoulement de ce système. Les vibrations semblent favoriser le glissement du gel aux parois mais il semble toutefois qu'elles induisent également des changements en volume dans l'échantillon. / Ultrasonic imaging and velocimetry has been proved to be very efficient methods to study various materials. At high intensity, ultrasonic waves are known to exert steady forces in newtonian fluid through nonlinear effects like the acoustic radiation pressure. However those effects have never been used in fundamental studies of the physics of soft materials. This thesis aims at exploiting the interaction between high intensity ultrasound and soft jammed materials to probe actively and even modify their mechanical properties.We first introduce an alternative technique for active microrheology we called « acoustic mesorheology ». By analyzing the motion of an intruder under the acoustic radiation pressure we characterize locally the rheology of the system under study. We test this technique on a simple yield stress fluid, namely a carbopol microgel. We compare the results with those obtained by standard rheology measurements of the behaviour of this gel under its yield stress.Then we describe the fluidization of an immersed granular packing by high intensity focused ultrasound. We compare our observations with the results of molecular dynamics simulations. The obtained fluidization is original as the injection of energy is discontinuous in time. It is hysteretic and intermittent and those properties are well captures by both simulations and a phenomenological model.Finally, we replace the plane of a standard cone-plate rheometer by an ultrasonic transducer. This allows us to characterize the effect of high frequency vibrations on the rheology of a fragile carbon black gel. We observe a significant and eventually irreversible effect of ultrasound on the elastic modulus and on the yielding of the system. Vibrations are shown to favor wall slip but seem to induce changes in the volume of the sample though.

This thesis describes the study on structure and dynamics of various kinds of molecular membranes in general. We have studied the morphological transition of colloidal as well as biologically relevant membranes and qualitatively argued regarding the interplay between structure and dynamics. Systematic measurements have been performed to address the issue of ambiguous behavior of molecules under stress when its confined at the interface. The structural and dynamical effect on interfacial membranes have been studied for soft colloidal free standing langmuir monolayer as well as for the quasi two dimensional lipid membranes on solid supports. For organic nanoparticle monolayer we have observed a correlation between the nanoparticle raft dynamics and the underlying morphological transition. In this study we have also found a non-monotonic behavior of dynamical heterogeneity with time which is unusual for a colloidal system in common and beyond the prediction of Mode Coupling Theory. In the case of lipid membrane, we have given an experimental evidence of lipid molecular rearrangement process at molecular level when its perturbed by foreign entities. Using sophisticated X-Ray scattering techniques, we were able to capture the subtle changes happening in the assembly of lipid molecules in a planar bilayer structure when it interacts with molecules having biological relevance. In the next level we have used lipid membranes as an active plat-form to study the physical interaction with several kinds of nanoparticles and explored the mechanism of active participation of lipid molecules in self assembly process. Besides with the help of Fluorescence Correlation Spectroscopy, we have also studied the effect of nanoparticles assemblies on the dynamics of lipid molecules itself. In Chapter 1, we have provided the background along with a brief review of the existing literature for understanding the results represented in the subsequent chapters. This includes discussion on the various physical properties of our systems of interest, including dynamic behavior of colloidal particles in different concentration regime and a detailed theoretical understanding regarding the glass transition and jamming transition for a highly dense colloidal packing. In this section we have also discussed the advantages of interfacial microrheology technique over conventional bulk rheology in terms of efficiency and sensitivity. Here we have also pointed out the formulation of the multi-particle tracking method for achieving different parameters which are correlated in space and time for a given system. Followed by that the Dynamical Susceptibility and the anomaly in Van Hove correlation function, for a heterogeneous system has been argued thoroughly. Towards the end we have discussed about the general features of another type of two dimensional membrane i.e. the lipid membrane at interface. Using raft theory we have also tried to give a plausible explanation of the dynamical heterogeneity of the real cell membrane which is mimicked by the model supported lipid membrane. Here we have argued about the structural six fold symmetry of a compact monolayer. Finally in the last part we have summarized the theoretical aspects of the lipid molecule mediated self assembly process and the how the lipid diffusion plays a vital role in it. Chapter 2 deals with the aspect of measuring the morphological transition and its effect on the dynamics for a two dimensional membrane at air/water interface. It starts with the discussion on the synthesis method for various types of organic molecule grafted nanoparticles like Cadmium Selenide(CdSe Quantum Dots) and Gold Nanoparticle(Au NPs) of different size and properties and followed by a preparation method of 2D film at air/water interface and on solid substrate using Langmuir-Blodgett method. In this chapter we have discussed about the basic principles of several experimental tools like Brewster Angle Microscopy(BAM), Laser Scanning Confocal Microscopy(LSCM), Atomic Force Microscopy(AFM), Thermogravimetric Analysis(TGA), X Ray Reflectivity(XRR), Grazing Incidence Diffraction(GID), Fluorescence Correlation Spectroscopy(FCS) etc. Chapter 3 explains the main aspects of the microscopic dynamics in dense amorphous nanoparticle monolayer at the air-water interface. In this study we have found a transition in mechanical properties, tracked down through the systematic variation of isothermal compressibility(�) with increasing two dimensional packing fraction of nanoparticle rafts up to the area fraction of Φ∼0.82 using Laser Scanning Confocal Microscope. Here we have used multi particle tracking method for a close packed gold monolayer with CdSe tracer to estimate different dynamical properties like Mean Square Displacement(MSD), Dynamical Heterogeneity etc. These calculations indeed point out the non-monotonic variation of the amplitude in the four-point dynamic susceptibility (χ4), a signature of spatio-temporal extension of correlated domains. Along with that we have also observed the anomaly in trend for the inherent relaxation time τ∗with increasing area fraction(Φ). Interestingly the variation in χ4exactly follows the systematic we found for the isothermal compressibility( �) with increasing Φ and that indicates the connection between the observed macroscopic transitions in mechanical properties and the microscopic dynamical phase transitions. Finally we have given a possible explanation of these kind of events in terms of the interaction between this sterically stabilized nanoparticle domains with the help of interpenetration of the capping long chain polymers of the neighboring nanoparticle. Chapter 4 opens up the possibilities of probing the hidden features of biomembranes at molecular scale with the help of very precise techniques based on synchrotron X ray diffraction. Here we have studied the rearrangement of the lipid molecules of an artificial membrane on a solid support as an effect of ad-sorption of organic branched molecules. In this work we have used non toxic PETIM dendrimers of two different generations, i.e. G3and G4which differs a lot in terms of size, no of termination groups, molecular weights and protonation states. Our initial measurements shows quantitatively the in-plane and out of plane symmetry breaking of the lipid bilayer as a result of the interaction with these two types of molecules. The molecular adsorption effect was quantified in terms of thickness reduction and the change in the scattering length density(SLD) or the electron density of the top layer in out of plane reflectivity model. Interestingly both the dendrimers showed different behavior and the interaction reflected in terms of membrane penetration was found stronger for higher generation. On the other hand the GID measurement indicates an enhancement of the in plane unit cell dimension and associated parameters of the arrangement of lipid molecules as a result of interaction with dendrimers. The combined XRR and GID measurements indicate a local fluidization of lipid packing as an outcome of charged branched molecules adsorption on the membrane surface. Chapter 5 is summarizes the lipid mediated self assembly process of nanoparticles on a bilayer and how the interaction changes the local properties of the bilayer represented by the molecular diffusivity. In this study we have used particles of wide variety of features in terms of size, charge, functionality, polarity etc and found a quite dramatic effect in the nanoparticle adsorption event on a solid supported Lαphased DMPC lipid bilayer. We have also seen that de-pending on the concentration and amount of surface charge the nanoparticles form two dimensional regular self assembled patterns on the bilayer surface. In FCS measurement, we have also found a second group of dynamics ( distribution of diffusivity) along with the normal bilayer diffusion which has been identified as the diffusion of the lipid molecules where nanoparticles are adsorbed. The inherent increment in diffusivity supports the argument of local fluidization in lipid membrane in presence of charged nanoparticle as we have observed in our XRR and GID data described in chapter 4. Chapter 6 contains the summary and the future perspective of the work presented here.

From a physical perspective biological cells consist of active soft matter that exist in a thermodynamic state far from equilibrium. Not only in muscles but also during cell proliferation, wound healing, embryonic development, and many other physiological tasks, generation of forces on the scale of whole cells is required. To date, cellular contractions have been ascribed to adhesion dependent processes such as myosin driven stress fiber formation and the development of focal adhesion complexes. In this thesis it is shown for the first time that contractions can occur independently of focal adhesions in single suspended cells. To measure mechanical properties of suspended cells the Optical Stretcher – a dualbeam laser trap – was used with phase contrast video microscopy which allowed to extract the deformation of the cell for every single frame. For fluorescence imaging confocal laser scanning microscopy was employed. The ratio of the fluorescence of a temperature sensitive and a temperature insensitive rhodamine dye was utilized to determine the temperatures inside the optical trap during and after Optical Stretching. The rise in temperature at a measuring power of 0.7W turned out to be enough to open a temperature sensitive ion channel transfected into an epithelial cell line. In this way a massive Ca2+ influx was triggered during the Optical Stretcher experiment. A new setup combining Optical Stretching and confocal laser scanning microscopy allowed fluorescence imaging of these Ca2+ signals while the cells were deformed by optically induced surface forces, showing that the Ca2+ influx could be manipulated with adequate drugs. This model system was then employed to investigate the influence of Ca2+ on the observed contractions, revealing that they are partially triggered by Ca2+. A phenomenological mathematical model based on the fundamental constitutive equation for linear viscoelastic materials extended by a term accounting for active contractions allowed to quantify the activity of the measured cells. The skewness and the median of the strain distributions were shown to depend on the activity of the cells. The introduced model reveals that even in measurements, that seemingly are describable by passive viscoelasticity, active contractililty might be superimposed. Ignoring this effect will lead to erroneous material properties and misinterpretation of the data. Taken together, the findings presented in this thesis demonstrate that active processes are an essential part of cellular mechanics and cells can contract even independently of adhesions. The results provide a method that allows to quantify active contractions of suspended cells. As the proposed model is not based on specific assumptions on force generating processes, it paves the way for a thorough investigation of different influences, such as cytoskeletal structures and intra-cellular signaling processes, to cellular contractions. The results present an important contribution for better mechanical classification of cells in future research with possible implications for medical diagnosis and therapy.

In this work, stretchable magnetic sensorics is successfully established by combining metallic thin films revealing a giant magnetoresistance effect with elastomeric materials. Stretchability of the magnetic nanomembranes is achieved by specific morphologic features (e.g. wrinkles), which accommodate the applied tensile deformation while maintaining the electrical and magnetic integrity of the sensor device. The entire development, from the demonstration of the world-wide first elastically stretchable magnetic sensor to the realization of a technology platform for robust, ready-to-use elastic magnetoelectronics with fully strain invariant properties, is described. The prepared soft giant magnetoresistive devices exhibit the same sensing performance as on conventional rigid supports, but can be stretched uniaxially or biaxially reaching strains of up to 270% and endure over 1,000 stretching cycles without fatigue. The comprehensive magnetoelectrical characterization upon tensile deformation is correlated with in-depth structural investigations of the sensor morphology transitions during stretching. With their unique mechanical properties, the elastic magnetoresistive sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. This feature leads electronic skin systems beyond imitating the characteristics of its natural archetype and extends their cognition to static and dynamic magnetic fields that by no means can be perceived by human beings naturally. Various application fields of stretchable magnetoelectronics are proposed and realized throughout this work. The developed sensor platform can equip soft electronic systems with navigation, orientation, motion tracking and touchless control capabilities. A variety of novel technologies, like smart textiles, soft robotics and actuators, active medical implants and soft consumer electronics will benefit from these new magnetic functionalities.:Outline List of abbreviations 7 1. INTRODUCTION 1.1 Motivation and scope of this work 8 1.1.1 A brief review on stretchable electronics 8 1.1.2 Stretchable magnetic sensorics 10 1.2 Technological approach 11 1.3 State-of-the-art 12 2. THEORETICAL BACKGROUND 2.1 Magnetic coupling phenomena in layered structures 14 2.1.1 Magnetic interlayer exchange coupling 14 2.1.2 Exchange bias 15 2.1.3 Orange peel coupling 16 2.2 Giant magnetoresistance 17 2.2.1 Electronic transport through ferromagnets 17 2.2.2 The GMR effect 19 2.2.3 GMR multilayers 20 2.2.4 Spin valves 21 2.3 Theory of elasticity 22 2.3.1 Elastomeric materials 22 2.3.2 Stress and strain 23 2.3.3 Rubber elasticity 25 2.3.4 The Poisson effect 26 2.3.5 Viscoelasticity 27 2.3.6 Bending strain in a stiff film on a flexible support 27 2.4 Approaches to stretchable electronic systems 28 2.4.1 Microcrack formation 28 2.4.2 Meanders and compliant patterns 29 2.4.3 Surface wrinkling 30 2.4.4 Rigid islands 32 3. METHODS & MATERIALS 3.1 Sample fabrication 34 3.1.1 Polydimethylsiloxane (PDMS) 34 3.1.2 PDMS film preparation 35 3.1.3 Lithographic structuring on the PDMS surface. 36 3.1.4 Magnetic thin film deposition 38 3.1.5 GMR layer stacks 40 3.1.6 Mechanically induced pre-strain 43 3.1.7 Methods and materials for the direct transfer of GMR sensors 45 3.1.8 Materials used for imperceptible GMR sensors 47 3.2 Characterization 48 3.2.1 GMR characterization setup with in situ stretching capability 48 3.2.2 Sample mounting 50 3.2.3 Electrical contacting of stretchable sensor devices 51 3.2.4 Customized demonstrator electronics 52 3.2.5 Microscopic investigation techniques 53 4. RESULTS & DISCUSSION 4.1 GMR multilayer structures on PDMS 54 4.1.1 Pre-characterization 54 4.1.2 Thermally induced wrinkling 55 4.1.3 Self-healing effect 57 4.1.4 Demonstrator: Magnetic detection on a curved surface 60 4.1.5 Sensitivity enhancement 61 4.1.6 GMR sensors in circumferential geometry 64 4.1.7 Stretchability test 67 4.2 Stretchable spin valves 69 4.2.1 Random wrinkles and periodic fracture 70 4.2.2 GMR characterization 73 4.2.3 Stretching of spin valves 74 4.2.4 Microcrack formation mechanism 76 4.3 Direct transfer printing of GMR sensorics 81 4.3.1 The direct transfer printing process 82 4.3.2 Direct transfer of GMR microsensor arrays 84 4.3.3 Direct transfer of compliant meander shaped GMR sensors 86 4.4 Imperceptible magnetoelectronics 89 4.4.1 GMR multilayers on ultra-thin PET membranes 89 4.4.2 Imperceptible GMR sensor skin 92 4.4.3 Demonstrator: Fingertip magnetic proximity sensor 93 4.4.4 Ultra-stretchable GMR sensors 94 4.4.5 Biaxial stretchability 99 4.4.6 Demonstrator: Dynamic detection of diaphragm inflation 101 5. CONCLUSIONS & OUTLOOK 5.1 Achievements 102 5.2 Outlook 104 5.2.1 Further development steps 104 5.2.2 Prospective applications. 105 5.3 Technological impact: flexible Bi Hall sensorics 106 5.3.1 Application potential 106 5.3.2 Thin and flexible Hall probes 107 5.3.3 Continuative works and improvements 108 5.4 Activities on technology transfer and public relations 108 Appendix References 110 Selbständigkeitserklärung 119 Acknowledgements 120 Curriculum Vitae 121 Scientific publications, contributions, patents, grants & prizes 122

A new method, probability distribution of diffusivities (time scaled square displacements between succeeding video frames), was developed to analyze single molecule tracking (SMT) experiments. This method was then applied to SMT experiments on ultrathin liquid tetrakis(2-ethylhexoxy)silane (TEHOS) films on Si wafer with 100 nm thermally grown oxide, and on thin semectic liquid crystal films. Spatial maps of diffusivities from SMT experiments on 220 nm thick semectic liquid crystal films reveal structure related dynamics. The SMT experiments on ultrathin TEHOS films were complemented by fluorescence correlation spectroscopy (FCS). The observed strongly heterogeneous single molecule dynamics within those films can be explained by a three-layer model consisting of (i) dye molecules adsorbed to the substrate, (ii) slowly diffusing molecules in the laterally heterogeneous near-surface region of 1 - 2 molecular diameters, and (iii) freely diffusing dye molecules in the upper region of the film. FCS and SMT experiments reveal a strong influence of substrate heterogeneity on SM dynamics. Thereby chemisorption to substrate surface silanols plays an important role. Vertical mean first passage times (mfpt) in those films are below 1 µs. This appears as fast component in FCS autocorrelation curves, which further contain a contribution from lateral diffusion and from adsorption events. Therefore, the FCS curves are approximated by a tri-component function, which contains an exponential term related to the mfpt, the correlation function for translational diffusion and a stretched exponential term for the broad distribution of adsorption events. Lateral diffusion coefficients obtained by FCS on 10 nm thick TEHOS films, thereby, are effective diffusion coefficients from dye transients in the focal area. They strongly depend on the substrate heterogeneity. Variation of the frame times for the acquisition of SMT experiments in steps of 20 ms from 20 ms to 200 ms revealed a strong dependence of the corresponding probability distributions of diffusivities on time, in particular in the range between 20 ms and 100 ms. This points to average dwell times of the dye molecules in at least one type of the heterogeneous regions (e.g. on and above silanol clusters) in the range of few tens of milliseconds. Furthermore, time series of SM spectra from Nile Red in 25 nm thick poly-n-alkyl-methacrylate (PnAMA) films were studied. In analogy to translational diffusion, spectral diffusion (shifts in energetic positions of SM spectra) can be studied by probability distributions of spectral diffusivities, i.e. time scaled square energetic displacements. Simulations were run and analyzed to study contributions from noise and fitting uncertainty to spectral diffusion. Furthermore the effect of spectral jumps during acquisition of a SM spectrum was investigated. Probability distributions of spectral diffusivites of Nile Red probing vitreous PnAMA films reveal a two-level system. In contrast, such probability distributions obtained from Nile Red within a 25 nm thick poly-n-butylmethacrylate film around glass transition and in the melt state, display larger spectral jumps. Moreover, for longer alkyl side chains a solvent shift to higher energies is observed, which supports the idea of nanophase separation within those polymers.

A new method, probability distribution of diffusivities (time scaled square displacements between succeeding video frames), was developed to analyze single molecule tracking (SMT) experiments. This method was then applied to SMT experiments on ultrathin liquid tetrakis(2-ethylhexoxy)silane (TEHOS) films on Si wafer with 100 nm thermally grown oxide, and on thin semectic liquid crystal films. Spatial maps of diffusivities from SMT experiments on 220 nm thick semectic liquid crystal films reveal structure related dynamics. The SMT experiments on ultrathin TEHOS films were complemented by fluorescence correlation spectroscopy (FCS). The observed strongly heterogeneous single molecule dynamics within those films can be explained by a three-layer model consisting of (i) dye molecules adsorbed to the substrate, (ii) slowly diffusing molecules in the laterally heterogeneous near-surface region of 1 - 2 molecular diameters, and (iii) freely diffusing dye molecules in the upper region of the film. FCS and SMT experiments reveal a strong influence of substrate heterogeneity on SM dynamics. Thereby chemisorption to substrate surface silanols plays an important role. Vertical mean first passage times (mfpt) in those films are below 1 µs. This appears as fast component in FCS autocorrelation curves, which further contain a contribution from lateral diffusion and from adsorption events. Therefore, the FCS curves are approximated by a tri-component function, which contains an exponential term related to the mfpt, the correlation function for translational diffusion and a stretched exponential term for the broad distribution of adsorption events. Lateral diffusion coefficients obtained by FCS on 10 nm thick TEHOS films, thereby, are effective diffusion coefficients from dye transients in the focal area. They strongly depend on the substrate heterogeneity. Variation of the frame times for the acquisition of SMT experiments in steps of 20 ms from 20 ms to 200 ms revealed a strong dependence of the corresponding probability distributions of diffusivities on time, in particular in the range between 20 ms and 100 ms. This points to average dwell times of the dye molecules in at least one type of the heterogeneous regions (e.g. on and above silanol clusters) in the range of few tens of milliseconds. Furthermore, time series of SM spectra from Nile Red in 25 nm thick poly-n-alkyl-methacrylate (PnAMA) films were studied. In analogy to translational diffusion, spectral diffusion (shifts in energetic positions of SM spectra) can be studied by probability distributions of spectral diffusivities, i.e. time scaled square energetic displacements. Simulations were run and analyzed to study contributions from noise and fitting uncertainty to spectral diffusion. Furthermore the effect of spectral jumps during acquisition of a SM spectrum was investigated. Probability distributions of spectral diffusivites of Nile Red probing vitreous PnAMA films reveal a two-level system. In contrast, such probability distributions obtained from Nile Red within a 25 nm thick poly-n-butylmethacrylate film around glass transition and in the melt state, display larger spectral jumps. Moreover, for longer alkyl side chains a solvent shift to higher energies is observed, which supports the idea of nanophase separation within those polymers.