Power system generators are interconnected in a distributed network to allow sharing of power. If one of the generators cannot meet the power demand, spare power is diverted from neighbouring generators. However, this approach also allows for propagation of electric disturbances. An oscillation arising from a disturbance at a given generator site will affect the normal operation of neighbouring generators and might cause them to fail. Hours of production time will be lost in the time it takes to restart the power plant. If the disturbance is detected early, appropriate control measures can be applied to ensure system stability. The aim of this study is to improve existing algorithms that estimate the oscillation parameters from acquired generator data to detect potentially dangerous power system disturbances. When disturbances occur in power systems (due to load changes or faults), damped oscillations (or &quotmodes") are created. Modes which are heavily damped die out quickly and pose no threat to system stability. Lightly damped modes, by contrast, die out slowly and are more problematic. Of more concern still are &quotnegatively damped" modes which grow exponentially with time and can ultimately cause the power system to fail. Widespread blackouts are then possible. To avert power system failures it is necessary to monitor the damping of the oscillating modes. This thesis proposes a number of damping estimation algorithms for this task. If the damping is found to be very small or even negative, then additional damping needs to be introduced via appropriate control strategies. This thesis presents a number of new algorithms for estimating the damping of modal oscillations in power systems. The first of these algorithms uses multiple orthogonal sliding windows along with least-squares techniques to estimate the modal damping. This algorithm produces results which are superior to those of earlier sliding window algorithms (that use only one pair of sliding windows to estimate the damping). The second algorithm uses a different modification of the standard sliding window damping estimation algorithm - the algorithm exploits the fact that the Signal to Noise Ratio (SNR) within the Fourier transform of practical power system signals is typically constant across a wide frequency range. Accordingly, damping estimates are obtained at a range of frequencies and then averaged. The third algorithm applied to power system analysis is based on optimal estimation theory. It is computationally efficient and gives optimal accuracy, at least for modes which are well separated in frequency.

Univ., Diss.--Bonn, 2002. / Enth. 3 Beitr.

Η παρούσα διατριβή ασχολείται με τη συγκριτική μελέτη λέξεων στην Αγγλική και τη Νέα Ελληνική που περιέχουν δεσμευμένα μορφολογικά στοιχεία, δηλαδή μορφήματα που δεν απαντώνται ανεξάρτητα στο λόγο. Στην Αγγλική οι λέξεις αυτές είναι γνωστές με τον όρο «νεοκλασικά σύνθετα», καθώς τα δεσμευμένα στοιχεία που περιέχουν έχουν αρχαιοελληνική ή λατινική προέλευση. Στη Νέα Ελληνική πρόκειται για μία κατηγορία ρηματικών συνθέτων, που περιέχουν ένα δεσμευμένο θέμα ρηματικής προέλευσης σε τελική θέση. Σημαντικό χαρακτηριστικό των εν λόγω λέξεων είναι ότι ένα μεγάλο ποσοστό αυτών ανήκει σε ειδικά επιστημονικά και τεχνικά λεξιλόγια. Στόχος της μελέτης είναι ο άμεσος συσχετισμός των λέξεων αυτών στις δύο γλώσσες από μορφολογική άποψη, με απώτερο σκοπό τη βέλτιστη υπολογιστική τους επεξεργασία. Για τις ανάγκες της παρούσας συγκροτήθηκαν δύο σώματα δεσμευμένων θεμάτων που εμφανίζονται σε τελική θέση μέσα σε λέξεις της Αγγλικής και της Νέας Ελληνικής, τα οποία αποτέλεσαν τα κύρια γλωσσικά δεδομένα, τόσο για την θεωρητική ανάλυση, όσο και για την υπολογιστική επεξεργασία των υπό εξέταση λέξεων. Λαμβάνοντας υπόψη τις θεωρητικές απόψεις που έχουν διατυπωθεί, τα δεδομένα που προέκυψαν από την εξέταση των σωμάτων δεσμευμένων στοιχείων, καθώς και την παρουσία των λέξεων με δεσμευμένα στοιχεία κατά τη διάρκεια εξέλιξης της κάθε γλώσσας, πραγματοποιείται η μορφολογική τους ανάλυση, που έχει ως αποτέλεσμα τον άμεσο συσχετισμό τους με την αναγνώριση αντίστοιχων δομών στις εν λόγω λέξεις. Με βάση τα συμπεράσματα της θεωρητικής ανάλυσης επιχειρείται η δημιουργία ενός συστήματος υπολογιστικής μορφολογικής επεξεργασίας των εν λόγω λέξεων, που διέπεται από κοινές αρχές και κοινούς κανόνες για τις δύο γλώσσες, με στόχο την όσο το δυνατόν αποτελεσματικότερη και οικονομικότερη περιγραφή του φαινομένου, για χρήση σε ένα πλήθος εφαρμογών της γλωσσικής επεξεργασίας. Ο φορμαλισμός που χρησιμοποιείται αποτελεί έναν λεξιλογικό μεταγλωττιστή (LEXC) που είναι ιδιαίτερα κατάλληλος για τον ορισμό λεξιλογίων φυσικών γλωσσών και βασίζεται στις μεθόδους πεπερασμένων καταστάσεων. / This PhD thesis deals with the comparative study of words containing bound morphological stems in English and Modern Greek (MG) and their computational processing. A great number of these words, also known as neoclassical compounds, belong to technical and scientific terminologies. The linguistic database used for the theoretical analysis and the computational processing proposed in this study, consists of two corpora, especially built for and appended in the current study, containing bound stems as final elements in words of English and MG. According to the theoretical analysis proposed, compounds with bound stems in the two languages share similar structures. The proposed system for the computational processing of these words, based on the the conclusions of the theoretical analysis, makes use of finite state methods, specifically the Xerox Lexical Compiler (LEXC) and offers an efficient way of implementing the phenomenon of neoclassical compounding in modern languages.

This thesis investigates how teachers from different disciplines understand and implement education for sustainable development in their teaching. A nationwide questionnaire study was conducted with 3229 upper secondary school teachers representing 224 schools in Sweden. The concept of sustainable development is complex and research has shown that teachers exhibit uncertainties in their understanding of it, and that the way they conceptualize sustainable development can have consequences for how they incorporate it into their teaching. Previous research has emphasized that Education for Sustainable Development (ESD) should promote interdisciplinary and holistic learning rather than traditional subject-based learning. This is in accordance with the Swedish curriculum, which emphasizes that all teachers in all subjects should integrate education for sustainable development. The teachers in the study were grouped into four disciplines; science-, social science-, language-, and vocational/esthetical-practical teachers.  The results showed that there were many subject-bound barriers to successful implementation of  ESD. Teachers were influenced by their subject tradition in: 1) how they understand sustainable development, 2) which teaching methods they use, 3) which barriers they experience, and 4) which teaching tradition they work within. Because of these differences it is important to adjust any further training of teachers according to their discipline. This study highlights the need for improved teacher education and further training of in-service teachers; more than 70% of the teachers stated that they need such training. It also highlights the issue how strong subject-bound traditions make it difficult to implement general goals of the curricula such as sustainable development.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho apresenta uma estimativa a priori para o limite superior da distribuição de temperatura considerando um problema em regime permanente em um corpo com uma condutividade térmica dependente da temperatura. A discussão é realizada supondo que as condições de contorno são lineares (lei de Newton do resfriamento) e que a condutividade térmica é constante por partes (quando considerada como uma função da temperatura). Estas estimativas consistem em uma ferramenta poderosa que pode prescindir da necessidade de uma simulação numérica cara de um problema de transferência de calor não linear, sempre que for suficiente conhecer o valor mais alto de temperatura. Nestes casos, a metodologia proposta neste trabalho é mais eficaz do que as aproximações usuais que assumem tanto a condutividade térmica quanto as fontes de calor como constantes. / This article presents an a priori upper bound estimate for the steady-state temperature distribution in a body with a temperature-dependent thermal conductivity. The discussion is carried out assuming linear boundary conditions (Newton law of cooling) and a piecewise constant thermal conductivity (when regarded as a function of the temperature). These estimates consist of a powerful tool that may circumvent an expensive numerical simulation of a nonlinear heat transfer problem, whenever it suffices to know the highest temperature value. In these cases the methodology proposed in this work is more effective than the usual approximations that assume thermal conductivities and heat sources as constants.

Les hydrocarbures aromatiques polycycliques (HAP) sont des polluants persistants retrouvés majoritairement dans l’environnement, qui sont reconnus comme hautement toxiques pour les organismes vivants. Les nombreux travaux réalisés sur les mécanismes contrôlant l’évolution des HAP dans le sol et dans la rhizosphère ont mis en exergue le rôle majeur de la biodégradation par les microorganismes et de la sorption aux constituants du sol. Néanmoins, un manque d’informations persiste concernant le devenir de ces HAP dans le sol, et plus particulièrement leur localisation dans les compartiments du sol ainsi que la nature et le comportement des composés issus de leur dégradation. La thèse avait donc comme principaux objectifs : (a) la localisation des HAP et des produits dérivés dans les compartiments du sol (matières organiques, phases minérales, microorganismes et plante), et (b) la quantification et l’identification des composés organiques formant les résidus liés du sol. Pour cela, nous avons couplé deux approches:(i) le suivi d’un HAP modèle marqué, le 13C-phénanthrène (13C-PHE), dans un sol artificiellement contaminé planté et non planté pour notamment déterminer par IRMS et NanoSIMS la distribution du C issu du PHE dans les compartiments et pour identifier les composés dérivés du 13C-PHE par 13C-RMN et TD/pyGCMS. (ii) le suivi d’une contamination ancienne et récente en HAP dans un sol historiquement contaminé pour étudier l’influence des matières organiques et des phases minérales (séparées par un fractionnement densimétrique) dans la rétention des HAP. Plus de 40% du C issu du 13C-PHE est retenu dans le sol après 14 jours de croissance du ray-grass. L’enrichissement en 13C observé dans la plante est du même ordre que celui du sol (E13C ≈ 0.04 % at.) démontrant une incorporation homogène du 13C-PHE entre la plante et le sol. Cet enrichissement global dans la plante est confirmé par les images NanoSIMS réalisées sur les racines. Des hotspots en 13C ont également été observés dans la rhizosphère, et à partir de leur taille, leur forme et leur composition élémentaire en C, N et S ils ont été identifiés comme étant des bactéries, ce qui met en avant leur rôle dans la dynamique des HAP du sol. Dans le sol industriel, la majorité des HAP est retrouvée dans les MO non complexées aux minéraux. En revanche, les HAP fraîchement ajoutés se sont significativement liés aux associations organo-minérales composées de quartz, de feldspaths et de phyllosilicates / Polycyclic aromatic hydrocarbons (PAHs) are major persistent pollutants in the environment that are recognized as highly toxic to living organisms. Numerous studies were carried out on the fate of PAHs in soil and in plant rhizosphere and highlighted the major contribution of biodegradation processes and of the sorption to soil constituents. However, a lack of knowledge remains about the fate of PAHs in the soil and especially their location in soil compartments as well as the nature and the behavior of degradation products. The main objectives of the thesis were: (a) to localize PAHs and their derived products within soil compartments (organic matter, minerals, microorganisms and plant), and (b) to quantify and identify the organic compounds forming bound residues. For this purpose, we used two approaches: (i) the monitoring of a labeled PAH, the 13C-phenanthrene (13C-PHE), in a spiked soil planted or not to determine by IRMS and NanoSIMS the 13C-distribution into compartments and to identify derived compounds of 13C-PHE by 13C-RMN et TD/pyGCMS. (ii) the distribution and localization of aged and freshly spiked PAH contamination in a brownfield soil to study the impact of organic matter and minerals (using soil densimetric fractionation) in the PAH retention. More than 40% of C from 13C-PHE remained in the soil after 14 days of ryegrass growth. The 13C-enrichment in plant tissue was similarly to the soil enrichment (E13C ≈ 0.04 at.%) indicating uniform uptake of 13C-PHE between the soil and plant. NanoSIMS images acquired for roots confirmed this global enrichment in the plant. 13C-Hospots were also observed in the rhizosphere, and on the basis on their size, their shape and their elemental composition in C, N and S, they were identified as bacteria, which emphasize their contribution to the fate of PAHs in soil. In the industrial soil, most of the PAHs were found attached to the free OM. However, the freshly spiked PAHs in the soil were significantly associated with organo-mineral associations containing quartz, feldspars and phyllosilicates

[pt] Quais devem ser a características da política monetária ótima sob comprometimento em uma situação de armadilha da liquidez global quando os Bancos Centrais não coordenam suas ações? Fazendo o uso de um modelo de economia aberta com dois países, fizemos um exercício numérico para endereçar essa questão e estudar as diferenças entre este caso e uma situação cooperativa, na qual as autoridades monetárias não estão somente preocupadas com a utilidade da população nacional, mas em vez disso maximizam uma medida de bem-estar global. Nossas descobertas apontam para diferenças nas características de dependência histórica e internacional da prescrição monetária em cada um dos casos observados. Também é feita uma análise de bem-estar do nosso experimento que sugere que um Banco Central local prefere, não só permanecer restrito pelo limite inferior zero da taxa de juros nominal por um período maior, mas também que o país estrangeiro saia dessa situação o quanto antes. Por fim, fazemos uma análise de robustez dos nossos resultados variando o tamanho de cada nação e o grau de substituição dos produtos produzidos em cada localidade. / [en] What should be the characteristics of the optimal monetary policy under commitment in the situation of a global liquidity trap when Central Banks do not coordinate their actions? Using a two-country open economy model, we perform a numerical exercise in order to address this question and study the differences between this setting and a cooperative situation, when monetary authorities are not only worried with the national household utility, but instead maximize a measure of world welfare. Our findings points towards differences of history and international dependence features of optimal monetary prescriptions in each of the observed cases. We also execute a welfare analysis of our experiment that suggests that a local Central Bank prefers, not only to stay restrained by zero lower bound (ZLB) on nominal interest rates for a longer period, but also that the foreign country exists this situation as early as possible. Lastly, we make a robustness analysis of our results varying the size of each nation and the degree of substitution of the composite goods produced in each locality.

The three-body bound state problem is considered using configuration-space Faddeev equations within the framework of the total-angular-momentum representation. Different three-body systems are considered, the main concern of the investigation being the i) calculation of binding energies for weakly bounded trimers, ii) handling of systems with a plethora of states, iii) importance of three-body forces in trimers, and iv) the development of a numerical technique for reliably handling three-dimensional integrodifferential equations. In this respect we considered the three-body nuclear problem, the 4He trimer, and the Ozone (16 0 3 3) system. In practice, we solve the three-dimensional equations using the orthogonal collocation method with triquintic Hermite splines. The resulting eigenvalue equation is handled using the explicitly Restarted Arnoldi Method in conjunction with the Chebyshev polynomials to improve convergence. To further facilitate convergence, the grid knots are distributed quadratically, such that there are more grid points in regions where the potential is stronger. The so-called tensor-trick technique is also employed to handle the large matrices involved. The computation of the many and dense states for the Ozone case is best implemented using the global minimization program PANMIN based on the well known MERLIN optimization program. Stable results comparable to those of other methods were obtained for both nucleonic and molecular systems considered. / Physics / D.Phil. (Physics)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho apresenta uma estimativa a priori para o limite superior da distribuição de temperatura considerando um problema em regime permanente em um corpo com uma condutividade térmica dependente da temperatura. A discussão é realizada supondo que as condições de contorno são lineares (lei de Newton do resfriamento) e que a condutividade térmica é constante por partes (quando considerada como uma função da temperatura). Estas estimativas consistem em uma ferramenta poderosa que pode prescindir da necessidade de uma simulação numérica cara de um problema de transferência de calor não linear, sempre que for suficiente conhecer o valor mais alto de temperatura. Nestes casos, a metodologia proposta neste trabalho é mais eficaz do que as aproximações usuais que assumem tanto a condutividade térmica quanto as fontes de calor como constantes. / This article presents an a priori upper bound estimate for the steady-state temperature distribution in a body with a temperature-dependent thermal conductivity. The discussion is carried out assuming linear boundary conditions (Newton law of cooling) and a piecewise constant thermal conductivity (when regarded as a function of the temperature). These estimates consist of a powerful tool that may circumvent an expensive numerical simulation of a nonlinear heat transfer problem, whenever it suffices to know the highest temperature value. In these cases the methodology proposed in this work is more effective than the usual approximations that assume thermal conductivities and heat sources as constants.

La capture de mouvement ambulatoire est un sujet en plein essor pour des applications aussi diverses que le suivi des personnes âgées, l'assistance des sportifs de haut niveau, la réhabilitation fonctionnelle, etc. Ces applications exigent que le mouvement ne soit pas contraint par un système externe, qu’il puisse être réalisé dans différentes situations, y compris en extérieur, que l’équipement soit léger et à un faible coût, qu’il soit réellement ambulatoire et sans procédure complexe de calibration.Actuellement, seuls les systèmes utilisant un exosquelette ou bien des modules inertiels (souvent combinés avec des modules magnétiques) permettent d'effectuer de la capture de mouvement de façon ambulatoire. Le poids de l’exosquelette est très important et il impose des contraintes sur les mouvements de la personne, ce qui le rend inutilisable pour certaines applications telles que le suivi de personnes âgées. La technologie inertielle est plus légère. Elle permet d'effectuer la capture du mouvement sans contrainte sur l’espace de mesure ou sur les mouvements réalisés. Par contre, elle souffre de dérives des gyromètres, et le système doit être recalibré.L'objectif de cette thèse est de développer un système de capture de mouvement de chaînes articulées, bas-coût et temps réel, réellement ambulatoire, ne nécessitant pas d'infrastructure de capture spécifique, permettant une utilisation dans de nombreux domaines applicatifs (rééducation, sport, loisirs, etc.).On s'intéresse plus particulièrement à des mesures intra-corporelles. Ainsi, tous les capteurs sont placés sur le corps et aucun dispositif externe n'est utilisé. Outre un démonstrateur final permettant de valider l'approche proposée, on s'astreint à développer également des outils qui permettent de dimensionner le système en termes de technologie, nombre et position des capteurs, mais également à évaluer différents algorithmes de fusion des données. Pour ce faire, on utilise la borne de Cramer-Rao.Le sujet est donc pluridisciplinaire. Il traite des aspects de modélisation et de dimensionnement de systèmes hybrides entièrement ambulatoires. Il étudie des algorithmes d'estimation adaptés au domaine de la capture de mouvement corps entier en traitant les problématiques d'observabilité de l'état et en tenant compte des contraintes biomécaniques pouvant être appliquées. Ainsi, un traitement adapté permet de reconstruire en temps réel la posture du sujet à partir de mesures intra-corporelles, la source étant également placée sur le corps. / Ambulatory motion capture is of great interest for applications ranging for the monitoring of elderly people, sporty performances monitoring, functional rehabilitation, etc. These applications require that the movement is not constrained by an external system, that it can be performed in different situations, including outdoor environment. It requires lightweight and low cost equipment; it must be truly ambulatory without complex process of calibration.Currently, only systems using an exoskeleton or inertial modules (often combined with magnetic modules) can be used in such situations. Unfortunately, the exoskeleton weight is not affordable and it imposes constraints on the movements of the person, which makes it unusable for certain applications such as monitoring of the elderly.Inertial technology is lighter. Itcan be used for the capture of movement without constraints on the capture space or on the movements. However, it suffers from gyros drift, and the system must be recalibrated.The objective of this thesis is to develop a system of motion capture for an articulated chain, low-cost, real-time truly ambulatory that does not require specific capture infrastructure, that can be used in many application fields (rehabilitation, sport, leisure, etc.).We focus on intra-corporal measurements. Thus, all sensors are placed on the body and no external device is used. In addition to a final demonstrator to validate the proposed approach, we also develop tools to evaluate the system in terms of technology, number and position of sensors, but also to evaluate different algorithms for data fusion. To do this, we use the Cramer-Rao lower bound. \\The subject is multidisciplinary. It addresses aspects of modelling and design of fully ambulatory hybrid systems. It studies estimation algorithms adapted to the field of motion capture of a whole body by considering the problem of observability of the state and taking into account the biomechanical constraints that can be taken into account. Thus, with an appropriate treatment, the pose of a subject can be reconstructed in real time from intra-body measurements.