La tesis analiza un corpus de 74 cederrones dedicados a la enseñanza del español como lengua extranjera fechados mayoritariamente entre los años 1997 y 2007 con los siguientes objetivos: a) determinar el panorama de este tipo de soporte a partir de sus características intrínsecas, de acuerdo con las teorías de las adquisición de segundas lenguas y, especialmente, las de enseñanza de lenguas asistida por ordenador. b) establecer el eventual rendimiento de esos materiales didácticos concretos en ese soporte en el proceso de enseñanza / aprendizaje del ELE a partir de sus características intrínsecas. c) diseñar, en relación con lo anterior, unos instrumentos de análisis didáctico y también de valoración. d) finalmente, subordinado a los resultados del análisis, proponer una serie de recomendaciones didácticas (y en menor medida técnicas) para el diseño, implantación y uso de estos materiales en este u otros soportes análogos.

Silicon technologyhas been seekingfor a monolithic solution for a chip where data processing and data communication is performed in the CMOS part and the photonic component, respectively. Traditionally, silicon has been widely considered for electronic applications but not for photonic applications due to its indirect bandgap nature. However, band structure engineering and manipulation through alloying Si with Ge and Sn has opened new possibilities. Theoretical calculations show that it is possible to achieve direct transitions from Ge ifit is alloyed with Sn. Therefore, a GeSn system is a choice to get a direct bandgap. Extending to ternary GeSnSi and quaternary GeSnSiCstructures grown on Si wafers not only makes the bandgap engineering possible but also allowsgrowing lattice matched systems with different strain and bandgaps located in the infrared region. Different heterostructures can be designed and fabricated for detecting lightas photonic sensing oremitting the light as lasers. Alloying not only makes engineering possible but it also induces strain which plays an important role for electronic applications. Theoretical and experimental works show that tensile strain could increase the mobility, which is promising for electronic devices where high mobility channels for high performance MOSFETs is needed to speed up the switching rate. On the other hand, high n-doping in tensile strains in p-i-n structures makesΓ band transitions most probable which is promising for detection and emission of the light. As another benefit of tensile strain, the direct bandgap part shrinks faster than the indirect one if the strain amount is increased. To get both electronic and photonic applications of GeSn-based structures, two heterostructures (Ge/GeSn(Si)/GeSi/Ge/Si and Ge/GeSn/Si systems), including relaxed and compressive strained layers used to produce tensile strained layers, were designed in this thesis. The low temperature growth is of key importance in this work because the synthesis of GeSn-based hetrostructures on Si wafers requires low thermal conditions due tothe large lattice mismatch which makes them metastable. RPCVD was used to synthesize theseheterostructures because not only it offers a low temperature growth but also because it is compatible with CMOS technology. For utilization of these structures in devices, n-type and p-type doping of relaxed and compressive strained layers were developed. HRRLMs, HRTEM, RBS, SIMS, and FPP techniques were employed to evaluatestrain, quality, Sn content and composition profile of the heterostructures. The application of GeSn-based heterostructures is not restricted to electronics and photonics. Another application investigated in this work is photovoltaics. In competition with Si-based solar cells, which have, or areexpected to have,high stability and efficiency, thirdgeneration solar cells offer the use of low cost materials and production and can therefore be an alternative for future light energy conversion technology. Particularly, quantum dot sensitized solar cells are associated with favorable properties such as high extrinsic coefficients, size dependent bandgaps and multiple exciton generation and with a theoretical efficiencyof 44%. In this work, two categories of QDs, Cd-free and Cd-based QDs were employed as sensitizers in quantum dot sensitized solar cells (QDSSCs). Cd-based QDs have attracted large interest due to high quantum yield,however, toxicityremains still totheir disadvantage. Mn doping as a bandgap engineering tool for Cd-based type IIZnSe/CdS QDs wasemployed to boostthe solar cell efficiency. Theoretical and experimental investigations show that compared to single coreQDSSCs,typeII core-shells offer higher electron-hole separation due to efficient band alignment where the photogenerated electrons and holes are located in the conduction band of the shell and valence band of the core, respectively. This electron-hole separation suppresses recombination and by carefully designing the band alignment in the deviceit can increase the electron injection and consequently the power conversion efficiency of the device. Considering eco-friendly and commercialization aspects, three different “green” colloidal nanostructures having special band alignments, which are compatible for sensitized solar cells, were designed and fabricated by the hot injection method. Cu2GeS3-InP QDs not only can harvest light energy up to the infraredregion but can also be usedastypeII QDs. ZnS-coating was employed as a strategy to passivate the surface of InP QDs from interaction with air and electrolyte. In addition, ZnS-coating and hybrid passivation was applied for CuInS2QDs to eliminate surface traps. / <p>QC 20151125</p>

No description available.

Dans les systèmes optiques modernes, l'importance des composants holographiques ne cesse d'augmenter. Parmi les matériaux holographiques disponibles, la gélatine bichromatée se distingue par la très bonne qualité des hologrammes obtenus. Cette thèse décrit la mise au point de techniques de fabrication et de caractérisation de composants holographiques en gélatine bichromatée. L'interprétation des mesures de caractérisation s'appuie sur une modélisation approfondie de la diffraction par des structures périodiques: une nouvelle méthode de résolution de la théorie d'ondes couplées, plus stable numériquement que les précédentes, est proposée. De plus, la théorie de la diffraction par des réseaux est étendue a des cas importants de restitution en lumière quasi-monochromatique. Les dispositifs expérimentaux développés ont permis l'étude et la réalisation de quatre nouveaux types d'hologrammes: réseaux pour la compression temporelle d'impulsions ultra brèves, hologramme synthétique séparateur et uniformiseur de faisceau laser, lentille holographique pour diode laser infrarouge et hologramme en ligne pour la réplication globale de disques compacts.

Εξαιτίας των πολλών εφαρμογών του καδμίου στη βιομηχανία αλλά και των ταυτόχρονα τοξικών ιδιοτήτων του στα έμβια όντα, η απομάκρυνση του Cd(II) από υδατικά απόβλητα είναι σήμερα ένα ενδιαφέρον θέμα έρευνας στην Περιβαλλοντική Χημεία. Η υγρή εκχύλιση (εκχύλιση με διαλύτη) είναι μια αποτελεσματική μέθοδος για την απομάκρυνση του Cd(II) από διαλύματα που περιέχουν ιόντα χλωριδίων, θειικά ή φωσφορικά διαλύματα. Κατά την υγρή εκχύλιση το μεταλλοϊόν συμπλοκοποιείται με έναν οργανικό υποκαταστάτη σχηματίζοντας ένα χημικό είδος που μεταφέρεται από την υδατική στην οργανική φάση σε ένα διφασικό σύστημα. Αναφέρθηκε πρόσφατα ότι το κάδμιο(II) μπορεί να εκχυλιστεί από μέσα που περιέχουν ιόντα χλωριδίων ή ιόντα χλωριδίων/νιτρικών χρησιμοποιώντας δύο 2-πυρίδυλο κετονοξίμες, και συγκεκριμένα την 1-(2-πυριδυλο)-δεκατρια-1-όνη οξίμη (2PC12) και την 1-(2-πυριδυλο)-δεκαπεντε-1-όνη (2PC14), ως μέσα εκχύλισης. Ο στόχος αυτής της εργασίας είναι να μοντελοποιήσει την φύση των χημικών ειδών που σχηματίζονται κατα την διαδικασία της υγρής εκχύλισης του Cd(II) χρησιμοποιώντας 2-πυρίδυλο κετονοξίμες ως μέσα εκχύλισης. Έτσι μελετήσαμε τις αντιδράσεις διαφόρων πηγών Cd(II) με 2-πυρίδυλο οξίμες ως υποκαταστάτες (Σχήμα I). Οι υποκαταστάτες που χρησιμοποιήθηκαν ήταν οι 2-πυριδίνη αλδοξίμη (paoH), μέθυλο 2-πυρίδυλο κετονοξίμη (mepaoH), φαίνυλο 2-πυρίδυλο κετονοξίμη (phpaoH) και πυριδινη-2-αμιδοξίμη (ampaoH). Η συστηματική συνθετική μας διερεύνηση οδήγησε στα προϊόντα [CdI2(paoH)2] (1), [Cd(NO3)2(paoH)2] (2), [Cd(NO3)(H2O)(paoH)2](NO3) (3), [Cd(paoH)3](ClO4)2 (4), [Cd(pao)2(paoH)2] (5), [CdI2(mepaoH)2] (6), [Cd(NO3)2(mepaoH)2] (7), [Cd(O2CMe)2(mepaoH)2] (8), [CdCl2(phpaoH)2] (9), [Cd4Br8(phpaoH)4]n (10), [CdI2(phpaoH)2] (11), [Cd(NO3)2(phpaoH)2] (12), [Cd2(Ο2CMe)4(phpaoH)2]n (13), [CdCl2(ampaoH)2] (14), [CdBr2(ampaoH)2] (15), [CdI2(ampaoH)2] (16) και [Cd(NO3)2(ampaoH)2] (17). Οι μοριακές και κρυσταλλικές δομές των συμπλόκων προσδιορίστηκαν με κρυσταλλογραφία ακτίνων Χ επί μονοκρυστάλλων των ενώσεων (Σχήμα II). Τα σύμπλοκα χαρακτηρίσθηκαν με στοιχειακές αναλύσεις και διάφορες φασματοσκοπικές μεθόδους (IR, Raman, NMR, Φωτοφωταύγεια). Τα φασματοσκοπικά δεδομένα μελετήθηκαν σε σχέση με τις γνωστές δομές των ενώσεων. Tα περισσότερα σύμπλοκα είναι μονοπυρηνικά. Οι ενώσεις 10 και 13 είναι 1D πολυμερή ένταξης. Τα μόρια paoH, mepaoH, phpaoH και ampaoH συμπεριφέρονται ως Ν(πυρίδυλο), Ν(οξιμικό)-διδοντικοί χηλικοί υποκαταστάτες. Τα ιόντα CdII στα σύμπλοκα είναι 6-, 7- και 8-ενταγμένα. Οι κρυσταλλικές δομές των περισσοτέρων συμπλόκων σταθεροποιούνται από δεσμούς Η. Τα περισσότερα σύμπλοκα διασπώνται στο DMSO, όπως προκύπτει από τα 1Η ΝΜR φάσματά τους. Τα σύμπλοκα 9, 14 και 12, 17 μοντελοποιούν τα χημικά είδη [CdCl2(μέσο εκχύλισης)2] και [Cd(NO3)2(μέσο εκχύλισης)2] που έχει προταθεί ότι σχηματίζονται κατά τη διαδικασία της υγρής εκχύλισης του Cd(II) με τη χρησιμοποίηση των 2PC12 και 2PC14 σε διαλύματα χλωριδίων και χλωριδίων/νιτρικών, αντίστοιχα. Με επιφύλαξη προτείνουμε ότι η ικανότητα των 2-πυρίδυλο κετοξιμών να απομακρύνουν Cd(II) από υδατικά απόβλητα οφείλεται στην ισχυρά χηλική φύση των μέσων εκχύλισης. / Because of the wide application of cadmium in various industrial facilities and its simultaneous toxic properties for organisms, the removal of Cd(II) from wastewater is a currently hot topic in environmental chemistry. Solvent extraction is an efficient method from the removal of Cd(II) from chloride, sulfate or phosphate solutions. Solvent extraction occurs when a metal ion is coordinated to an organic ligand to form a species that is transferred from the aqueous to the organic phase in a two-phase system. It has recently been reported that cadmium(II) can be extracted from chloride or chloride/nitrate media using two 2-pyridyl ketoximes, namely 1-(2-pyridyl)-trideca-1-one oxime (2PC12) and 1-(2-pyridyl)-pentadeca-one oxime (2PC14), as extractants and chloroform or hydracarbons as organic solvents [A. Parus, K. Wieszczycka, A. Olszanowski (2011) Hydrometallurgy, 105, 284]. The goal of this work is to model the nature of the chemical species that are formed during the solvent extraction of Cd(II) using 2-pyridyl ketoximes as extractants. Thus, we studied the reactions of various Cd(II) sources with 2-pyridyl oximes as ligands (Scheme I). The ligands used were 2-pyridine aldoxime (paoH), methyl 2-pyridyl ketoxime (mepaoH), phenyl 2-pyridyl ketoxime (phpaoH) and pyridine-2-amidoxime (ampaoH). Our systematic investigations gave the products [CdI2(paoH)2] (1), [Cd(NO3)2(paoH)2] (2), [Cd(NO3)(H2O)(paoH)2](NO3) (3), [Cd(paoH)3](ClO4)2 (4), [Cd(pao)2(paoH)2] (5), [CdI2(mepaoH)2] (6), [Cd(NO3)2(mepaoH)2] (7), [Cd(O2CMe)2(mepaoH)2] (8), [CdCl2(phpaoH)2] (9), [Cd4Br8(phpaoH)4]n (10), [CdI2(phpaoH)2] (11), [Cd(NO3)2(phpaoH)2] (12), [Cd2(Ο2CMe)4(phpaoH)2]n (13), [CdCl2(ampaoH)2] (14), [CdBr2(ampaoH)2] (15), [CdI2(ampaoH)2] (16) and [Cd(NO3)2(ampaoH)2] (17). The molecular and crystal structures of the complexes have been determined by single-crystal, X-ray crystallography (Scheme II). The complexes have been characterized by elemental analyses and various spectroscopic techniques (IR, Raman, NMR, Photoluminescence). The spectroscopic data are discussed in terms of the known structures. Most complexes are mononuclear. Compounds 10 and 13 are 1D coordination polymers. The paoH, mepaoH, phpaoH and ampaoH molecules behave as N(pyridyl), N(oxime)–bidentate chelating ligands. The CdII ions in the complexes are 6-, 7- and 8-coordinate. The crystal structures of most complexes are stabilized by H bonds. Most of the complexes decompose in DMSO, as evidenced by 1H NMR spectroscopy. Complexes 9, 14 and 12, 17 model the chemical species [CdCl2(extractant)2] and [Cd(NO3)2(extractant)2] that have been proposed to form during the solvent extraction of Cd(II) using 2PC12 and 2PC14 in chloride and dilute chloride/concentrated nitrate solutions, respectively. We tentatively propose that the ability of 2-pyridyl ketoximes to remove Cd(II) from wastewater is due to the strongly chelating nature of the extractants.

In the review part of the thesis we summarize various modified theories of gravity, especially those that are characterized by additional curvature invariants in the Lagrangian density. Further, we review non-twisting geometries, especially their Kundt subclass. Finally, from the principle of least action we derive field equations for the case with the Lagrangian density corresponding to an arbitrary function of the curvature invariants. In the original part of the thesis we explicitly express particular components of the field equations for non-gyratonic Kundt geometry in generic quadratic gravity in arbitrary dimension. Then we discuss how this, in general fourth order, field equations restrict the Kundt metric in selected geome- trically privileged situations. We also analyse the special case of Gauss-Bonnet theory. 1

La reconnaissance moléculaire constitue l’une des questions fondamentales les plus discutées dans le domaine de la chimie supramoléculaire. Cette thèse présente la conception, la synthèse et l’étude des propriétés de capsules hélicoïdales auto-organisées par repliement d’oligoamides aromatiques. Ces récepteurs sont constitués d’une chaîne oligomérique se repliant en hélice et comprenant une séquence d’unités codant pour des diamètres différents. Le repliement de l’oligomère donne naissance à une cavité pouvant accueillir des molécules invitées. La grande modularité des séquences, permettant une évolution contrôlée des structures des foldamères, donne lieu à la reconnaissance sélective et anticipée de substrats d’intérêts biologiques. Le phénomène d’encapsulation a été mis en évidence en solution par spectroscopie RMN et CD, et dans le solide par diffraction des rayons X. / Molecular recognition is one of the major challenges of supramolecular chemistry. Here, we present the design, synthesis and study of helical capsules properties self-organised by aromatic oligoamide folding. These receptors consist of oligomeric chains that fold into a helical conformation and comprise of a sequence of units which code for different diameters. Oligomeric folding defines a cavity which can recognize guests. The great modularity of the sequences has allowed a controlled evolution of foldamer structure resulting in the selective and predict recognition of biological substrates. The phenomenon of encapsulation was demonstrated in solution by NMR and CD spectroscopy and in the solid state by X-ray diffraction.

No description available.

Generating web applications with correct structure and modern functionalities using a development platform is not widely known for students in academia around the world. Modern web development is moving further towards advancement where different functionalities adapted for web application development increase and become more central in today's market. Introducing modern concepts in web application development to the students in academia at an early stage is essential in order to provide better insight of how to suitably develop and maintain the structure of modern "Web Applications".  This thesis describes the work carried out to investigate how a web application can effectively be developed and structured by the undergraduate students in the course II1302 Projects and project methods at the Royal Institute of Technology (KTH) using a development platform.  The case study is conducted as a research method for this thesis. The research method revolved around experimentation with an example application to identify the possibilities of using a development platform in conjunction to improve the teaching of modern web application development early in education, and then apply the development platform in the course's future projects.  This thesis identifies pertinent fields of knowledge throughout the development of a web application using the development platform to learn about the relevant concepts and definitions of modern and future technologies used in web application development. The implementation of the web application covers the areas such as automation, deployment, and monitoring. These areas are utilized in the form of the following aspects: DevOps, CI/CD, integration cloud deployment, IoT simulated device, MVC design pattern architecture for both frontend and backend, programming frameworks, i.e., Angular JS frontend framework and Spring Boot backend framework. A description of how the application is managed and what technologies and resources are used is presented.  These aspects are used throughout the process of web application development. The requirements of using the development platform aim to be relevant to the students' studies at a sufficient difficulty level in course II1302. The students are expected to have an extended knowledge in basic web application development. / Att generera webbapplikationer med rätt struktur och moderna funktioner med hjälp av en utvecklingsplattform är inte allmänt känt för studenter inom akademin runt om i världen. Modern webbutveckling går vidare mot avancemang där olika funktioner anpassade för webbapplikationsutveckling ökar och blir mer centrala på dagens marknad. Att introducera moderna koncept inom webbapplikationsutveckling för studenter i akademin på ett tidigt stadium är viktigt för att ge bättre insikt om hur man på ett lämpligt sätt kan utveckla och behålla strukturen för moderna "Web Applications".  Denna avhandling beskriver arbetet med att undersöka hur en webbapplikation effektivt kan utvecklas och struktureras av studenterna i kursen II1302 Projekt och projektmetoder vid Royal Institute of Technology (KTH) med hjälp av en utvecklingsplattform.  Fallstudien genomförs som en forskningsmetod för denna avhandling. Forskningsmetoden kretsade kring experiment med en exempelapplikation för att identifiera möjligheterna att använda en utvecklingsplattform tillsammans för att förbättra undervisningen i modern webbapplikationsutveckling tidigt i utbildningen och sedan tillämpa utvecklingsplattformen i kursens framtida projekt.  Denna avhandling identifierar relevanta kunskapsområden genom utvecklingen av en webbapplikation med hjälp av utvecklingsplattformen för att lära sig relevanta begrepp och definitioner av modern och framtida teknik som används i webbapplikationsutveckling. Implementeringen av webbapplikationen täcker områden som automatisering, distribution och övervakning. Dessa områden används i form av följande aspekter: DevOps, CI/CD, integration av moln, IoT -simulerad enhet, MVC -designmönsterarkitektur för både frontend och backend, programmeringsramar, dvs Angular JS frontend framework och Spring Boot backend framework. En beskrivning av hur applikationen hanteras och vilken teknik och resurser som används presenteras.  Dessa aspekter används under hela processen för webbapplikationsutveckling. Kraven för att använda utvecklingsplattformen syftar till att vara relevanta för studenternas studier med tillräcklig svårighetsgrad i kurs II1302. Studenterna förväntas ha en utökad kunskap inom grundläggande webbapplikationsutveckling.

Cystic fibrosis (CF) is caused by mutations in the gene that codes for the chloride channel cystic fibrosis transmembrane conductance regulator (CFTR). Recent advances in CF treatment have included use of small-molecule drugs known as modulators, such as Lumacaftor (VX-809), but their detailed mechanism of action and interplay with the surrounding lipid membranes, including cholesterol, remain largely unknown. To examine these phenomena and guide future modulator development, we prepared a set of wild type (WT) and mutant helical hairpin constructs consisting of CFTR transmembrane (TM) segments 3 and 4 and the intervening extracellular loop (termed TM3/4 hairpins) that represent minimal membrane protein tertiary folding units. These hairpin variants, including CF-phenotypic loop mutants E217G and Q220R, and membrane-buried mutant V232D, were reconstituted into large unilamellar phosphatidylcholine (POPC) vesicles, and into corresponding vesicles containing 70 mol% POPC +30 mol% cholesterol, and studied by single-molecule FRET and circular dichroism experiments. We found that the presence of 30 mol% cholesterol induced an increase in helicity of all TM3/4 hairpins, suggesting an increase in bilayer cross-section and hence an increase in the depth of membrane insertion compared to pure POPC vesicles. Importantly, when we added the corrector VX-809, regardless of the presence or absence of cholesterol, all mutants displayed folding and helicity largely indistinguishable from the WT hairpin. Fluorescence spectroscopy measurements suggest that the corrector alters lipid packing and water accessibility. We propose a model whereby VX-809 shields the protein from the lipid environment in a mutant-independent manner such that the WT scaffold prevails. Such ‘normalization’ to WT conformation is consistent with the action of VX-809 as a protein-folding chaperone.