Nous nous sommes intéressés dans ce travail à l’étude du vieillissement physique d’un non-tissé fabriqué à l’aide de fibres textiles issues du recyclage de bouteilles plastiques selon le procédé par voie sèche. L’application de ce non-tissé est l’isolation thermique des bâtiments français. Après avoir mis en évidence la présence de deux réseaux de fibres, nous nous sommes intéressés au phénomène de relaxation structurale. Le vieillissement physique du non-tissé étant régi par l’enrobage d’une des fibres utilisées dans la fabrication de celui-ci, nous avons observé l’évolution de l’enthalpie de relaxation en fonction de différents couples temps de vieillissement, écart de température par rapport à sa température de transition vitreuse. Les résultats ont mis en évidence un état d’avancement du mécanisme de relaxation quasi-nul pour des températures très éloignées de la température de transition vitreuse de l’enrobage. L’évolution de cette même enthalpie de relaxation a été étudiée pour différents non-tissés issus de différents lots de fabrication des cinq dernières années. Il a été mis en évidence un mécanisme de relaxation lent dans les conditions expérimentales nous rassurant quant à la stabilité du produit fini dans le temps. / We focused on physical ageing of a non-woven produced by recycled fibers from plastic bottles. This non-woven is produced by drylaid-textile process and is used for building thermal insulation. Two networks are visible and structural relaxation has been investigated through the study of evolution of one fiber skin part with different couple time, temperature. Physical ageing of polymers can be followed by structural relaxation process. We showed that structural relaxation process is very long for temperatures of use far from glass transition temperature. Same results have been shown on the global non-woven stored in non-insulated box governed by Normandy weather. The combination of the two previous results reinforce our basic idea ; the insulator properties variation will be stable for long time only if temperature of use is far from glass transition temperature.

Indiana University-Purdue University Indianapolis (IUPUI) / Background: Elucidating the lithium disilicate system like the popular IPS e.max® CAD (LS2), made specifically for Computer-Aided Design and Computer-Aided Manufacturing (CAD-CAM), as a function of temperature unravels new ways to enhance material properties and performance. Objective: To study the effect of various thermal processing on the crystallization kinetics, crystallite microstructure, and strength of LS2. Methods: The control group of the LS2 samples was heated using the standard manufacturer heating-schedule. Two experimental groups were tested: (1) an extended temperature range (750-840 °C vs. 820-840 °C) at the segment of 30 °C/min heating rate, and (2) a protracted holding time (14 min vs. 7 min) at the isothermal temperature of 840 °C. Five other groups of different heating schedules with lower-targeted temperatures were evaluated to investigate the microstructural changes. For each group, the crystalline phases and morphologies were measured by X-ray diffraction (XRD) and scanning electron microscope (SEM) respectively. Differential scanning calorimeter (DSC) was used to determine the activation energy of LS2 under non-isothermal conditions. A MTS universal testing machine was used to measure 3-point flexural strength and fracture toughness, and elastic modulus and hardness were measured by the MTS Nanoindenter® XP. A one-way ANOVA/Tukey was performed per property (alpha = 0.05). Results: DSC, XRD, and SEM revealed three distinct microstructures during LS2 crystallization. Significant differences were found between the control group, the two aforementioned experimental groups, and the five lower-targeted-temperature groups per property (p<0.05). The activation energy for lithium disilicate growth was 667.45 (± 28.97) KJ/mole. Conclusions: Groups with the extended temperature range (750-840 °C) and protracted holding time (820-840 °C H14) produced significantly higher elastic-modulus and hardness properties than the control group but showed similar significant flexural-strength and fracture-toughness properties with the control group. In general, explosive growth of lithium disilicates occurred only when maximum formation of lithium metasilicates had ended.

Recycled material produced during three months from packing polyethylene foils coming from three suppliers was analysed together with one recycled material under complaint from the point of melt flow index (MFI), composition and mechanical properties. The addition of linear low density polyethylene (LLDPE) into the recycled material was studied as well. It was measured melt flow index (MFI), Differential scanning calorimetry (DSC) together with Thermogravimetry methods were used to determine composition. Selected materials were pressed to obtain films with the thickness of 1 mm to determine tensile properties. Recycled materials contained 40–65% LLDPE, small amount of polypropylene as well as chalk. The content of LDPE and LLDPE varied within one supplier and thus mechanical properties did. The results showed the difference in quality of PE films separation among all suppliers. The problems with workability of material under complaint were caused by the material composition – the amount of LLDPE predominated. The addition of LLDPE into the recycled material in the range of 5–20 % increased MFI by 13-78%. Mechanical properties of blends rich in LLDPE were similar to those of clear LLDPE. The presence of LDPE influenced more markedly only the strength to break. The blends of LDPE and LLDPE were evaluated as immiscible but with high affinity of the components with increasing contend of LLDPE. No material was chemically degraded. The methods commonly performed in manufacture, especially MFI, are not able to differentiate LDPE form LLDPE – recommended is DSC.

Additives, incorporated in film coating formulations, and their process parameters are generally selected using a trial-and-error approach. However, coating problems and defects, especially those associated with aqueous coating systems, indicate the necessity of embracing a quality-by-design approach to identify the optimum coating parameters. In this study, the feasibility of using thermal and rheological measurements to help evaluate and design novel coating formulations has been investigated. Hydroxypropyl methylcellulose acetate succinate (HPMCAS), an enteric coating polymer, was used as the film forming polymer. Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), and Parallel Plate Shear Rheometery (PPSR) were used to evaluate the effect of different plasticisers on the performance of HPMCAS. The results illustrate that, for identical formulations, the DSC and DMA methods yielded up to 40% differences in glass transition temperature (Tg) values. Moreover, Tg measured using loss modulus signals were always 20-30 oC less than those measured using tan delta results in DMA testing. Absolute and relative Tg values can significantly vary depending on the geometry of the samples, clamp size, temperature ramping rate and the frequency of the oscillations. Complex viscosity data for different formulations demonstrated a variable shear thinning behaviour and a Tg independent ranking. It is, therefore, insufficient to rely purely on Tg values to determine the relative performance of additives. In addition, complex viscosity results, obtained using both the DMA and PPSR techniques at similar temperatures, are shown to be comparable. The results from both techniques were therefore used to produce continuous master curves for the HPMCAS formulations. Additionally, step strain tests showed that HPMCAS chains do not fully III disentangle after 105 seconds as predicted by the Maxwell model. Finally, in situ aqueous-based coating experiments proved that mixtures of triethyl acetyl citrate and acetylated monoglyceride (TEAC/AMG), even without cooling of the suspension, do not cause blocking of the spray nozzle whereas triethyl citrate (TEC) based formulae did. TEAC (alone or in a combination with AMG) exhibits superior wettability to HPMCAS than TEC/AMG formulations and can be used to enhance the efficiency and film quality of the dry coating process.

Control and analysis of protein aggregation is an increasing challenge to biopharmaceutical research and development. Therefore it is important to understand the interactions, causes and analysis of particles in order to control protein aggregation to enable successful biopharmaceutical formulations. This work investigates the role of different non-ionic surfactants on protein conformational stability, as assessed by HSDSC, and on protein size stability as assessed by Dynamic Light Scattering (DLS), HIAC and MFI. BSA and IgG2 were used as model proteins. Thermal unfolding experiments indicated a very weak surfactant-immunoglobulin IgG2 interaction, compared to much stronger interactions for the BSA surfactant systems. The DLS results showed that BSA and IgG2 with different surfactants and concentration produced different levels of particle size growth. The heat treatment and aging of samples in the presence of Tween 20, Tween 80, Brij 35 and Pluronic F-68 surfactants led to an increase in the populations of larger particles for BSA samples, whereas IgG2 systems did not notably aggregate under storage conditions MFI was shown to be more sensitive than HIAC technique for measuring sub-visible particles in protein surfactant systems. Heat treatment and storage stress showed a significant effect on BSA and IgG2 protein sub-visible particle size stability. This work has demonstrated that both proteins with different Tween 20, Tween 80, Brij 35 and Pluronic F-68 concentrations, have different level of conformational and size stability. Also aging samples and heating stress bears the potential to generate particles, but this depends on surfactant type. Poor predictive correlations between the analytical methods were determined.

No description available.

Plastskräp har blivit ett global problem på grund av nedskräpning och otillräcklig avfallshantering. Användning av biologiskt nedbrytbart material kan underlätta problemet, även om det inte är en universallösning. Produkter gjorda av biologiskt nedbrytbart material skall ändå till avfallshantering eftersom nedbrytningen kan vara långvarig och variera mycket beroende av omgivningen. Därmed är användningen av biologiskt nedbrytbart material endast berättigat då det är svårt att samla in materialet eller avskilja det från organiskt material. Studiens mål var att undersöka biologiskt nedbrytbara material som kan användas i produkter som fungerar under många olika driftsförhållanden och inte kan återställas efter användning. I den litterära delen av denna studie definieras nedbrytning genom egenskaper och förhållanden som påverkar nedbrytningsprocessen. Nedbrytning av polyestrar och cellulosa och de standardprocessarna som används i nedbrytningsexperimenten betraktades. Standardprocesserna för nedbrytning studerades för att få en klarare inblick i den eftertraktade nedbrytningsgraden och de standardiserade förhållandena för nedbrytningen i olika miljöer. En sammanfattning av olika nedbrytningsexperiment och analysmetoder är också inkluderade för att försäkra att experimenten som utfördes är både giltiga och jämförbara med andra forskningsresultat inom fältet. I detta forskningsprojekt utfördes nedbrytningsexperiment i färskvatten- och hemkompostmiljöer. Målet med projektet var att bedöma ifall materialen kunde brytas ned i ett brett spektrum av miljöer, ifall de var mindre skadliga för naturen än konventionella material som används av dagens industri och för att uppskatta nedbrytningstakten. Nedbrytningstiden var 140 dagar och experimentet utfördes med 10 olika material: betecknade som A-J. Materialen analyserades 8 gånger under nedbrytningsperioden förutom materialen I och J som analyserades en gång efter 140 dagar. Materialen analyserades mekaniskt, strukturellt och termiskt med hjälp av dragprovning, FTIR och DSC. Provernas viktförändring bestämdes också. Nedbrytning observerades visuellt från provernas yta och genom mekaniska prover. Materialen som placerades i hemkomposten visade klara tecken på nedbrytning då färgen hade förändrats och förstärkningsfibrerna hade blivit synliga. Materialen som placerats i hemkompostmiljö visade också klara tecken på tillväxt av mikroorganismer och biomassa som uppstått på ytan av materialen. Sammanfattningsvist, visade materialen B, C och G de mest lovande resultaten med klara tecken på biologisk nedbrytning och de hade en snabbare nedbrytningstakt än de andra materialen som undersöktes. Material D visade klara tecken på biologisk nedbrytning på ytan men dess nedbrytningstakt var uppskattad att vara mycket långsammare. Därmed rekommenderas det att använda material A, B, D och G istället för konventionella icke biologiskt nedbrytbara material. Dessa material har potential att sänka den negativa inverkan och de långsiktiga riskerna av plastskräp för miljön. / Plastic debris has become a global crisis due to littering and misplaced waste management. The use of biodegradable materials can ease the problem, but it is not always the answer. Products made of biodegradable materials are still to be waste managed since biodegradation can be a long process and is highly dependent on the environment conditions. Hence, the use of biodegradable materials is justified only when retrieving the product after use is impossible or prohibitively expensive or separating it from organic matter is difficult. This study was made to investigate biodegradable materials that can be used in products that are operating in broad range of operational conditions and cannot be retrieved back after use in most cases. In the literature part of this study the biodegradation is defined along with properties and conditions that affect the biodegradation process. Biodegradation of polyesters and cellulose, and standards used in the biodegradation experiments were reviewed. Biodegradation standards were studied in order to have a clearer picture of the pursued degree of biodegradation and standardized properties in the biodegradation experiments. Review of different biodegradation tests and analysis methods are included as well to ensure that the experiments performed in this work are valid and comparable with other biodegradation studies.  In this study, the biodegradation experiment was conducted in freshwater and home compost environments. The aim was to determine if the materials were able to biodegrade in wide range of environments, to make sure they are less harmful than the conventional materials used in the industry and to estimate the rate of biodegradation. The duration of the experiments were 140 days with 10 different materials: A – J. The materials were analyzed 8 times during the aging period, except materials I and J, which were analyzed only once after 140 days. The samples were analyzed mechanically, structurally, and thermally using tensile test, FTIR and DSC measurements, respectively. Also, the samples weight changes were analyzed.  The degradation was visually observed from the surfaces of the samples and from mechanical testing in both experimental environments. Home compost environment showed clear signs of biodegradation where reinforcement fibers became visible and changed the color of some of the samples. Also, home compost samples had microorganisms growing on them, and biomass was developing around them. To conclude, material B, C and G had the most promising results with clear signs of biodegradation and had faster estimated biodegradation rate compared with the other studied materials. Material D had signs of biodegradation on the surface as well. However, the biodegradation rate was estimated to be much slower. In conclusion, it is recommended to use the studied materials A, B, D and G instead of the conventional non-biodegradable polymers. These materials have potential to lower the negative impact and long-term risks of plastic debris to the environment.

Die vorliegende Arbeit befasst sich mit der Synthese und der Untersuchung von Struktur-Eigenschaftsbeziehungen neuartiger V-förmiger, formstabiler Mesogene zur Realisierung biaxial nematischer Mesophasen (Nb). Alle synthetisierten Verbindungen besitzen ein formtreues Oligo(phenylenethinylen)-Grundgerüst, an welches laterale Alkyloxyketten und verschiedene terminale Substituenten (z. B. -CN, O(CH2)nCOOEt, Pyridyle) angebunden wurden. Durch dieses spezielle Design erhält man ausschließlich nematische und keine höher geordneten flüssigkristallinen Phasen. Durch den Einsatz verschiedener zentraler heterozyklischer Kernbausteine konnten erfolgreich Öffnungswinkel zwischen 108.9° und 160° realisiert werden. Dabei zeigen Thiadiazolderivate stets enantiotrope Mesophasen, wobei im Hochtemperaturbereich eine uniaxiale Phase mit biaxialen Aggregaten vorliegt. Beim Abkühlen konnte bei etwa 50 °C mittels Polarisationsmikroskopie und dielektrischer Spektroskopie ein Übergang in die Nb-Phase nachgewiesen werden. Die erstmalige Beobachtung eines direkten Übergangs von der isotropen Phase in die Nb-Phase gelang durch den Einsatz von Benzo[1,2-b:4,3-b]dithiophen als Kernbaustein.

Die vorliegende Arbeit befasst sich mit der Synthese und der Untersuchung von Struktur-Eigenschaftsbeziehungen neuartiger V-förmiger, formstabiler Mesogene zur Realisierung biaxial nematischer Mesophasen (Nb). Alle synthetisierten Verbindungen besitzen ein formtreues Oligo(phenylenethinylen)-Grundgerüst, an welches laterale Alkyloxyketten und verschiedene terminale Substituenten (z. B. -CN, O(CH2)nCOOEt, Pyridyle) angebunden wurden. Durch dieses spezielle Design erhält man ausschließlich nematische und keine höher geordneten flüssigkristallinen Phasen. Durch den Einsatz verschiedener zentraler heterozyklischer Kernbausteine konnten erfolgreich Öffnungswinkel zwischen 108.9° und 160° realisiert werden. Dabei zeigen Thiadiazolderivate stets enantiotrope Mesophasen, wobei im Hochtemperaturbereich eine uniaxiale Phase mit biaxialen Aggregaten vorliegt. Beim Abkühlen konnte bei etwa 50 °C mittels Polarisationsmikroskopie und dielektrischer Spektroskopie ein Übergang in die Nb-Phase nachgewiesen werden. Die erstmalige Beobachtung eines direkten Übergangs von der isotropen Phase in die Nb-Phase gelang durch den Einsatz von Benzo[1,2-b:4,3-b]dithiophen als Kernbaustein.

Nickel und Nickel (II) -oxid werden in großem Umfang in fortgeschrittenen elektronischen Geräten verwendet. In der Mikroelektronik-Industrie wird Nickel verwendet werden, um Nickelsilizid bilden. Die Nickelmono Silizid (NiSi) wurde als ausgezeichnetes Material für Source-Drain-Kontaktanwendungen unter 45 nm-CMOS-Technologie entwickelt. Im Vergleich zu anderen Siliziden für die Kontaktanwendungen verwendet wird NiSi wegen seines niedrigen spezifischen Widerstand, niedrigen Kontaktwiderstand, relativ niedrigen Bildungstemperatur und niedrigem Siliziumverbrauchs bevorzugt. Nickel in Nickelbasis-Akkus und ferromagnetischen Direktzugriffsspeicher (RAMs) verwendet. Nickel (II) oxid wird als Transistor-Gate-Oxid und Oxid in resistive RAM genutzt wird. Atomic Layer Deposition (ALD) ist eine spezielle Art der Chemical Vapor Deposition (CVD), das verwendet wird, um sehr glatte sowie homogene Dünnfilme mit hervorragenden Treue auch bei hohen Seitenverhältnissen abzuscheiden. Es basiert auf selbstabschließenden sequentielle Gas-Feststoff-Reaktionen, die eine präzise Steuerung der Filmdicke auf wenige Angström lassen sich auf der Basis. Zur Herstellung der heutigen 3D-elektronische Geräte, sind Technologien wie ALD erforderlich. Trotz der Vielzahl von praktischen Anwendungen von Nickel und Nickel (II) -oxid, sind einige Nickelvorstufen zur thermischen basierend ALD erhältlich. Darüber hinaus haben diese Vorstufen bei schlechten Filmeigenschaften führte und die Prozesseigenschaften wurden ebenfalls begrenzt. Daher in dieser Masterarbeit mussten die Eigenschaften verschiedener neuartiger Nickelvorstufen zu bewerten. Alle neuen Vorstufen heteroleptische (verschiedene Arten von Liganden) und Komplexe wurden vom Hersteller speziell zur thermischen basierend ALD aus reinem Nickel mit H 2 als ein Co-Reaktionsmittel gestaltet. Um die neuartige Vorläufer zu untersuchen, wurde eine neue Methode entwickelt, um kleine Mengen in einer sehr zeitsparend (bis zu 2 g) von Ausgangsstoffen zu testen. Diese Methodologie beinhaltet: TGA / DTA-Kurve analysiert der Vorstufen, thermische Stabilitätstests in dem die Vorläufer (<0,1 g) wurden bei erhöhter Temperatur in einer abgedichteten Umgebung für mehrere Stunden wurde die Abscheidung Experimenten und Film Charakterisierungen erhitzt. Die Abscheidungen wurden mit Hilfe der in situ Quarzmikrowaage überwacht, während die anwendungsbezogenen Filmeigenschaften, wie chemische Zusammensetzung, physikalische Phase, Dicke, Dichte, Härte und Schichtwiderstand wurden mit Hilfe von ex situ Messverfahren untersucht. Vor der Evaluierung neuartiger Nickelvorstufen ein Benchmark ALD-Prozess war vom Referenznickelvorläufer (Ni (AMD)) und Luft als Reaktionspartner entwickelt. Das Hauptziel der Entwicklung und Optimierung von solchen Benchmark-ALD-Prozess war es, Standard-Prozessparameter wie zweite Reaktionspartner Belichtungszeiten, Argonspülung Zeiten, gesamtprozessdruck, beginnend Abscheidungstemperatur und Gasströme zu extrahieren. Diese Standard-Prozessparameter mussten verwendet, um die Prozessentwicklung Aufgabe (das spart Vorläufer Verbrauch) zu verkürzen und die Sublimationstemperatur Optimierung für jede neuartige Vorstufe werden. Die ALD Verhalten wurde in Bezug auf die Wachstumsrate durch Variation des Nickelvorläuferbelichtungszeit, Vorläufer Temperatur und Niederschlagstemperatur überprüft. / Nickel and nickel(II) oxide are widely used in advanced electronic devices . In microelectronic industry, nickel is used to form nickel silicide. The nickel mono-silicide (NiSi) has emerged as an excellent material of choice for source-drain contact applications below 45 nm node CMOS technology. As compared to other silicides used for the contact applications, NiSi is preferred because of its low resistivity, low contact resistance, relatively low formation temperature and low silicon consumption. Nickel is used in nickel-based rechargeable batteries and ferromagnetic random access memories (RAMs). Nickel(II) oxide is utilized as transistor gate-oxide and oxide in resistive RAMs. Atomic Layer Deposition (ALD) is a special type of Chemical Vapor Deposition (CVD) technique, that is used to deposit very smooth as well as homogeneous thin films with excellent conformality even at high aspect ratios. It is based on self-terminating sequential gas-solid reactions that allow a precise control of film thickness down to few Angstroms. In order to fabricate todays 3D electronic devices, technologies like ALD are required. In spite of huge number of practical applications of nickel and nickel(II) oxide, a few nickel precursors are available for thermal based ALD. Moreover, these precursors have resulted in poor film qualities and the process properties were also limited. Therefore in this master thesis, the properties of various novel nickel precursors had to be evaluated. All novel precursors are heteroleptic (different types of ligands) complexes and were specially designed by the manufacturer for thermal based ALD of pure nickel with H 2 as a co-reactant. In order to evaluate the novel precursors, a new methodology was designed to test small amounts (down to 2 g) of precursors in a very time efficient way. This methodology includes: TGA/DTA curve analyses of the precursors, thermal stability tests in which the precursors (< 0.1 g) were heated at elevated temperatures in a sealed environment for several hours, deposition experiments, and film characterizations. The depositions were monitored with the help of in situ quartz crystal microbalance, while application related film properties like chemical composition, physical phase, thickness, density, roughness and sheet resistance were investigated with the help of ex situ measurement techniques. Prior to the evaluation of novel nickel precursors, a benchmark ALD process was developed from the reference nickel precursor (Ni(amd)) and air as a co-reactant. The main goal of developing and optimizing such benchmark ALD process was to extract standard process parameters like second-reactant exposure times, Argon purge times, total process pressure, starting deposition temperature and gas flows. These standard process parameters had to be utilized to shorten the process development task (thus saving precursor consumption) and optimize the sublimation temperature for each novel precursor. The ALD behaviour was checked in terms of growth rate by varying the nickel precursor exposure time, precursor temperature and deposition temperature.