In dieser Arbeit werden Fragestellungen aus dem Gebiet der Organischen Elektronik behandelt, hauptsächlich Grenzflächen zwischen Metallen und konjugierten organischen Molekülen (KOM). Im einzelnen wird behandelt: (i) der Einfluss der Orientierung von Molekülen auf die Energieniveaus, (ii) das gezielte Einstellen von Energieniveaus mithilfe starker Elektronenakzeptoren, (iii) die Rolle des thermodynamischen Gleichgewichts an organisch-organischen Grenzflächen und (iv) der Zusammenhang zwischen elektronischer Struktur an Grenzflächen und dem Bindungsabstand. Es wurden hauptsächlich Messungen mit ultravioletter Photoelektronenspektroskopie, unterstützt von Röntgenphotoelektronenspektroskopie, Spektroskopie mit metastabilen Atomen, Röntgenbeugung und stehenden Röntgenwellen, an vakuumsublimierten organischen dünnen Schichten im Ultrahochvakuum durchgeführt. (i) Eine neue Erklärung für das Phänomen der orientierungsabhängigen Ionisationsenergie in molekularen Verbünden wird gegeben. Dabei kommt es zu einem Einfluss intramolekularer Dipole auf die Ionisationsenergie. (ii) Es wurde eine neue Methode gefunden, um die Lochinjektionsbarriere (HIB) an organisch/metallischen Grenzflächen zu kontrollieren. Dazu wurden (Sub-)Monolagen starker Elektronenakzeptoren auf Metalloberflächen adsorbiert. Dabei kommt es zu einem Ladungstransfer, der die HIB eines darauf aufgedampften KOMs verringern kann. Das Konzept wurde mit drei Akzeptoren getestet und die HIB konnte um bis zu 1,2 eV verringert werden. (iii) Ein akzeptorvorbedeckungsabhängiger Übergang von Vakuumniveauangleichung zu einem „Pinning“ molekularer Niveaus an Homogrenzflächen eines KOMs mit liegender Mono- und stehender Multilage konnte beobachtet werden - ein direkter Beweis für einen thermodynamisch getriebenen Ladungstransfer. (iv) Ein klarer Zusammenhang zwischen der Stärke der chemischen Bindung und dem Bindungsabstand von KOM zu Metallsubstraten konnte gezeigt werden. / This work addresses several topics of the field of organic electronics, the focus lies on organic/metal interfaces. Four main topics have been covered: (i) the impact of molecular orientation on the energy levels, (ii) energy level tuning with strong electron acceptors, (iii) the role of thermodynamic equilibrium at organic/organic homo-interfaces and (iv) the correlation of interfacial electronic structure and bonding distance. To address these issues mainly ultraviolet photoelectron spectroscopy was used, supported by X-ray photoelectron spectroscopy, metastable atom electron spectroscopy, X-ray diffraction and X-ray standing waves, to examine vacuum sublimed thin films of conjugated organic molecules (COMs) in ultrahigh vacuum. (i) A novel approach is presented to explain the phenomenon that the ionization energy in molecular assemblies is orientation dependent. It is demonstrated that this is due to an impact of intramolecular dipoles on the ionization energy in molecular assemblies. Furthermore, the correlation of molecular orientation and conformation has been studied in detail for COMs on various substrates. (ii) A new approach was developed to tune hole injection barriers (HIB) at organic/metal interfaces by adsorbing a (sub-) monolayer of an organic electron acceptor on the metal electrode. Charge transfer from the metal to the acceptor leads to a chemisorbed layer, which reduces the HIB to the COM overlayer. With this concept a lowering of the HIB of up to 1.2 eV could be observed. (iii) A transition from vacuum-level alignment to molecular level pinning at the homo-interface between a lying monolayer and standing multilayers of a COM was observed, which depended on the amount of a pre-deposited acceptor. (iv) A clear correlation between the strength of chemical bonding of COMs and the bonding distance to metal substrates could be shown.

Depuis leurs découvertes dans les années 60 par Dewar, les composés BN-hétérocycliques ont subi un développement croissant, s’accentuant pendant la dernière décennie. Ce travail de thèse mené en collaboration avec le Pr S-Y LIU de Boston Collège (États-Unis) et le Pr L. WEBER de l’Université de Bielefeld (Allemagne), a permis la synthèse, ainsi que la caractérisation par spectroscopie photoélectronique à rayonnement UV de nouveaux systèmes. Dans une première partie représentée par les chapitres II, III et IV, nous abordons l’étude de la structure électronique des composés suivants : 1,2-dihydro-1,2-azaborine (1), N-Me-1,2-BN-toluene (2), N-Me-1,3-BN-toluene (3), 1,2-dihydro-1-aza-2-boranaphtalene (4), 1,2-dihydro-1-aza-2-boranthracene (5), 1,2-dihydro-1-aza-2-boranthracene (6), 1,2-dihydro-1-aza-2-boraphenanthrene (7), 1,3,2-benzodiazaborole (8), 1,9,8-benzodiazaborole (9), N-tert-butyl[1,3,2]diazaborolo[1,5-a]-pyridine (10), 1,3,2-trihydro[1,3,2]diazaborolo[1,5-a]-pyridine (11). Afin de compléter les propriétés physico-chimiques de ces nouveaux systèmes et d’aider à l’interprétation des spectres photoélectroniques, l’utilisation de calculs quantiques tels que la théorie de la fonctionnelle de la densité (DFT), la théorie fonctionnelle de la densité en fonction du temps (TD-DFT), la fonction de Green (OVGF), la méthode du troisième ordre partiel (P3), ou encore l’interaction de configuration (SAC-CI) ont été utilisées. Dans le Chapitre V, nous présentons une étude comparative entre les énergies ionisations théoriques et expérimentales. / Since the Dewar’s discovering in 60 years, the BN-heterocycles has experienced an important development during the last decade. This thesis presents our work on the synthesis and on the electronic structure characterization by Ultra-Violet photoelectron spectroscopy (UV-PES), followed in collaboration with the Pr SY LIU from the Boston College (USA) and the Pr L. WEBER from the University of Bielefeld (Germany). The first part corresponding to the chapter II, III and IV, describe the electronic structure analysis of: 1,2-dihydro-1,2-azaborine (1), N-Me-1,2-BN-toluene (2), N-Me-1,3-BN-toluene (3), 1,2-dihydro-1-aza-2-boranaphtalene (4), 1,2-dihydro-1-aza-2-boranthracene (5), 1,2-dihydro-1-aza-2-boranthracene (6), 1,2-dihydro-1-aza-2-boraphenanthrene (7), 1,3,2-benzodiazaborole (8), 1,9,8-benzodiazaborole (9), N-tert-butyl[1,3,2]diazaborolo[1,5-a]-pyridine (10), 1,3,2-trihydro[1,3,2]diazaborolo[1,5-a]-pyridine (11). In order to provide more information on the physical chemistry properties and to interpret the photoelectron spectra, the quantum chemical calculations of ionization energies have been followed using the Density Functional Theory (DFT), the Time-Dependent Density Functional Theory (TD-DFT), the Outer Valence Green’s Function (OVGF), the Partial third order (P3), the Symmetry Adapted Cluster-Configuration Interaction (SAC-CI). Moreover, the comparative analysis of theoretical and the experimental ionization energies are presented.

Organic semiconductors have wide applications in organic-based light-emitting diodes, field-effect transistors, and thermoelectrics due to the easily modified electrical and optical properties, excellent mechanical flexibility, and solution processability. To fabricate high performance devices, it is important to understand charge transport mechanisms, which are mainly affected by material energetics and material morphology. Currently it is difficult to control the charge transport properties of new organic semiconductors and organic-inorganic nanocomposites due to our incomplete understanding of the large number of influential variables. Molecular doping of π-conjugated polymers and surface modification of nanowires are two means through which charge transport can be manipulated. In molecular doping, both the energetics and microstructures of polymer films can be changed by controlling the degree of oxidation of the conjugated polymer backbone. For surface modification of inorganic nanowires, the energetics and morphology can be influenced by the properties of the surface modifiers. Meanwhile, the energy band alignment, which can be controlled by surface modification and molecular doping, may also alter the charge transport due to the variation in energetic barriers between the transport states in the organic and inorganic components. To reveal the effects of morphology and energetics on charge transport in conjugated polymers and organic-inorganic nanocomposites, the influence of surface modifier on the electrical and morphological properties of nanocomposites was first probed. Silver nanowires modified with different thiols were blended with poly (3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS) to fabricate thin films. The modified nanowires provided a means of controllably altering the nanowire dispersability and compatibility with solvents and polymers. The results also demonstrated that charge transport between the nanowires was facilitated due to low wire-to-wire junction resistance. To further figure out the charge transport mechanism in organic-inorganic nanocomposites and the potential applications, tellurium nanowires and ferric chloride doped poly (3-hexylthiophene-2,5-diyl)(P3HT) were used to characterize energy band alignment effects on charge transport, electrical conductivity, and thermoelectric properties. The results showed that charge transfer between nanowires can be mediated by the polymer and may potentially increase the electrical conductivity as compared to the pure polymer or pure nanowires; while the observed enhancement of power factor (equal to electrical conductivity times the square of Seebeck coefficient) may not be affected by the energy band alignment. It is important to investigate the change of polymer morphology caused by molecular doping and processing method to determine how the morphology will influence the electrical and thermoelectric properties. Various p-type dopants, including ferric chloride and molybdenum tris(1,2-bis(trifluoromethyl)ethane-1,2-dithiolene) (Motfd3), were examined for us in P3HT and other polymers. The results showed that: i) At light doping levels, the electrical conductivity and power factor of polymers doped with the large electron affinity (EA) dopants were larger than small EA dopants; ii) At heavy doping levels, the large size dopants cannot effectively dope polymers even for the dopants with large EAs; iii) For the same dopant, as the IE of the polymer increased, the doping efficiency gradually decreased.

Das fundamentale Verständnis von Ladungsträgern in molekularen Halbleitern, die typischerweise als Polaronen bezeichnet werden, ist unverzichtbar, wenn es um das Design besonders leistungsfähiger (opto)elektronischer Bauelemente geht. Die vorliegende Arbeit hat zum Ziel ein umfangreiches Bild der Energetik von Polaronen in organischen Halbleitern zu erhalten. Zunächst geht es darum einen Probenaufbau zu finden, der es nicht nur ermöglicht Ladungsträger zu generieren, sondern auch ihre elektronische Struktur unter Verwendung von komplementären Photoemissionstechniken – Rötngen-, Ultraviolett- und inverse Photoelektronenspektroskopie - aufzuklären. Das Probenkonzept basiert darauf, dass molekulare Filme, die eine niedrigere Ionisierungsenergie als die Austrittsarbeit des zugrunde liegenden Substrates aufweisen, Fermi-level Pinning zeigen. In diesem Fall wären die höchsten besetzten Zustände der neutralen molekularen Schicht energetisch oberhalb des Substrat-Fermi-Levels angeordnet, wodurch zum Erhalt des elektronischen Gleichgewichts die Notwendigkeit für einen Ladungstransfer gegeben ist. Da die starke elektronische Kopplung zwischen Molekülen und Metallen die spektrale Information der Überschussladungsträger verändern könnte, wird die Metalloberfläche durch eine ultradünne Zwischenschicht passiviert. Die Ergebnisse zeigen, dass es durch die vorliegende starke on-site Coulomb Repulsion zur Aufspaltung des höchsten besetzen molekularen Niveaus in ein besetztes und ein unbesetztes Sub-niveau kommt. Dies widerspricht der seit Jahren etablierten Vorstellung von einem einfach besetzten Niveau in der Bandlücke des neutralen molekularen Halbleiters. Unter zusätzlicher Berücksichtigung der inter-site Coulomb Repulsion zwischen Molekülionen und neutralen Molekülen, sowie der Energieniveau Verbiegung kann schließlich ein vollständiges Bild entwickelt werden, das die etablierte Vorstellung der Energieniveaus von Ladungsträgern in molekularen Halbleitern ersetzen soll. / Understanding the nature of charge carriers in molecular semiconductors, typically termed "polarons", is indispensable for rational material design targeting future superior (opto-)electronic device performance. The present work addresses this fundamental issue to derive a comprehensive picture of polarons in organic semiconductors. Conceptual work is dedicated to identifying a sample structure, which allows both, deliberately generating charged molecules and applying the complementary photoemission techniques X-ray, ultraviolet and inverse photoelectron spectroscopy in order to assess the polaron energetics. The sample concept is based on the fact that molecular layers exhibiting an ionization energy lower than the work function of the supporting substrate show Fermi-level pinning. There, as the substrate Fermi-level is moved into the occupied density of states of the molecular adsorbate, electron transfer occurs from the molecules to the substrate. Because strong electron coupling between molecules and eg. metal surfaces might mask or alter the spectral information of excess charge carriers, such interaction needs to be inhibited by implementation of an ultrathin passivating interlayer. The comprehensive results provide evidence that the highest occupied molecular orbital level is split into an upper unoccupied and a lower occupied sub-level due to strong on-site Coulomb interaction. This finding is in marked contrast to what has been assumed for decades, where a singly occupied level was proposed to lie within the gap of the neutral molecular semiconductor. Moreover, taking into account the inter-site Coulomb interaction between molecular cations and surrounding neutral molecules, as well as energy-level bending, finally, a complete picture of the energetics associated with polarons in molecular semiconductors could be derived, which aims at replacing common perceptions.

Ziel dieser Arbeit war die Entwicklung einer allgemein anwendbaren Methode für die Simulation von ultraschnellen Prozessen und experimentellen Observablen. Hierfür wurden die Berechnung der elektronischen Struktur mit der zeitabhängigen Dichtefunktionaltheorie (TDDFT) und das Tully-Surface-Hopping-Verfahren für die nichtadiabatische Kerndynamik auf der Basis klassischer Trajektorien miteinander kombiniert. Insbesondere wurde eine Beschreibung der nichtadiabatischen Kopplungen für TDDFT entwickelt. Diese Methode wurde für die Simulation noch komplexerer Systeme durch die Tight-Binding-Näherung für TDDFT erweitert. Da die zeitaufgelöste Photoelektronenspektroskopie (TRPES) ein exzellentes experimentelles Verfahren für die Echtzeitbeobachtung von ultraschnellen Prozessen darstellt, wurde eine TDDFT-basierte Methode für die Simulation von TRPES entwickelt. Der Methode liegt die Idee zu Grunde, das System aus Kation und Photoelektron näherungsweise durch angeregte Zustände des neutralen Moleküls oberhalb der Ionisierungsgrenze zu beschreiben. Um diese Zustände mit TDDFT berechnen zu können wurde eine Beschreibung der Übergangsdipolmomente zwischen angeregten TDDFT-Zuständen entwickelt. Des Weiteren wurden Simulationen im Rahmen des Stieltjes-Imaging-Verfahrens, das eine Möglichkeit der Rekonstruktion des Photoelektronenspektrums aus den spektralen Momenten bietet, durchgeführt. Diese spektralen Momente wurden aus den diskreten TDDFT-Zuständen berechnet. Die breite Anwendbarkeit der entwickelten theoretischen Methoden für die Simulation von komplexen Systemen wurde an der Photoisomerisierung in Benzylidenanilin sowie der ultraschnellen Photodynamik in Furan, Pyrazin und mikrosolvatisiertem Adenin illustriert. Die dargestellten Beispiele demonstrieren, dass die nichtadiabatische Dynamik im Rahmen von TDDFT bzw. TDDFTB sehr gut für die Untersuchung und Interpretation der ultraschnellen photoinduzierten Prozesse in komplexen Molekülen geeignet ist. / The goal of this thesis was the development of a generally applicable theoretical framework for the simulation of ultrafast processes and experimental observables in complex molecular systems. For this purpose, a combination of the time-dependent density functional theory (TDDFT) for the description of the electronic structure with the Tully''s surface hopping procedure for the treatment of nonadiabatic nuclear dynamics based on classical trajectories was employed. In particular, a new approach for the calculation of nonadiabatic couplings within TDDFT was devised. The method was advanced for the description of more complex systems such as chromophores in a solvation shell by employing the tight binding approximation to TDDFT. Since the time-resolved photoelectron spectroscopy (TRPES) represents a powerful experimental technique for real-time observation of ultrafast processes, a TDDFT based approach for the simulation of TRPES was developed. The basic idea is the approximate representation of the combined system of cation and photoelectron by excited states of the neutral species above the ionization threshold. In order to calculate these states with TDDFT, a formulation of the transition dipole moments between excited states within TDDFT was devised. Moreover, simulations employing the Stieltjes imaging (SI) procedure were carried out providing the possibility to reconstruct photoelectron spectra from spectral moments. In this work, the spectral moments were calculated from discrete TDDFT states. The scope of the developed theoretical methods was illustrated on the photoisomerization in benzylideneaniline as well as on the ultrafast photodynamics in furan, pyrazine, and microsolvated adenine. The examples demonstrate that the nonadiabatic dynamics simulations based on TDDFT and TDDFTB are particularly suitable for the investigation and interpretation of ultrafast photoinduced processes in complex molecules.

Le couplage de la spectroscopie d’impédance électrochimique(EIS) et de la spectroscopie photoélectronique à rayonnement X(XPS) a permis d’étudier en profondeur le lien entre la structure etles propriétés électrochimiques d’électrolytes solides en couchesminces, ainsi que de l’interface formée avec le matériau d’électrodepositive LiCoO2. L’incorporation d’azote dans la structure duLiPON, électrolyte solide de référence dans les microbatteries, estcaractérisée par la formation de lacunes de lithium et d’oxygènesfavorables au transport des ions lithium. Un électrolyte solideLiPOS a été développé par pulvérisation cathodique radiofréquencevia l’incorporation de soufre dans la structure initiale Li3PO4. Laprésence d’une interface solide/solide entre le LiPON et LiCoO2 estcaractérisée par une réduction partielle du cobalt et une oxydationdu LiPON à son voisinage, vraisemblablement responsable del’augmentation de la résistance de transfert de charges entre lesdeux matériaux. / The link between the structure and the electrochemicalproperties of thin-film electrolytes and the interface formed withthe cathode material LiCoO2 has been intensively studied bycoupling Electrochemical Impedance Spectroscopy (EIS) and X-rayPhotoelectron Spectroscopy (XPS). Nitrogen incorporation intoLiPON, reference solid-state electrolyte for microbatteries, ischaracterized by the formation of lithium and oxygen vacancies,increasing the lithium ions transport. A sulfide based thin filmelectrolyte called LiPOS has been developed by radiofrequencysputtering, with the incorporation of sulfur into the initial Li3PO4structure. The solid/solid interface between LiPON and LiCoO2 ischaracterized by a partial reduction of cobalt and oxidation ofLiPON, which is in all probability responsible of the increase of thecharge transfer resistance between the two materials.

Poly (glycerol-sebacate) (PGS) is a synthetic bioelastomer with a covalently crosslinked, three-dimensional network of random coils with hydroxyl groups attached to its backbone. This biodegradable polymer is biocompatible (in vitro and in vivo), tough, elastic, inexpensive, and flexible, and finds potential applications in tissue engineering and regenerative medicine. Due to the slow rate of step-growth polymerisation, the synthesis of PGS prepolymer requires 24-48 h. A batch and a continuous process, if developed, could address the inherent deficiencies (eg. long residence time, venting) associated with the large-scale synthesis of such bioelastomers. However, in order to assess whether this particular system may be adapted to continuous processes, such as reactive extrusion, studies on kinetics of controlled condensation reactions are of vital importance. FT-Raman spectroscopy was used to study the kinetics of the step-growth reactions between glycerol (G) and sebacic acid (SA) at three molar ratios (G:SA= 0.6,0.8,1.0) and three temperatures (120, 130, 140 ˚C). The rate curves followed first-order kinetics with respect to sebacic acid concentration in the kinetics regime. An increase in the molar ratio (G : SA) of the reactants decreased the average functionality of the system and the crosslinking density, resulting in the lowering of the activation energy and pre-exponential factor. The average functionality of the system had a profound effect on the crosslinking density, mechanical properties, and the reaction kinetics of the system. Three different PGS oligomers and films (PGS 0.6, PGS 0.8, PGS 1.0) were thoroughly characterised using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), wide angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and contact angle measurements. FTIR spectra of PGS oligomers confirmed the formation of ester bonds (1740 cm -1). Quantification of various functional groups in PGS films using XPS was in agreement with the theoretical values of the proposed structure. WAXS results indicated that PGS system with a higher average functionality possesses a higher degree of crystallinity. Crystallisation exotherms and melting endotherms of PGS systems revealed that the average functionality influences the density of crosslinking, degree of crystallinity, and the network structure of bioelastomers. Contact angle studies confirmed that an increase in the average functionality of PGS system increases hydrophilicity, and the surface treatment through aminolysis further increases the hydrophilicity of the films. Batch studies were performed on a Brabender Plasticorder®. The samples collected over a reaction period of 5 h were characterised using Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The number-average molecular weight (Mn) and the weight-average molecular weight (Mw) of the oligoesters were determined using matrix-assisted laser desroption/ionization time-of-flight spectroscopy (MALDI-TOF) and compared with the corresponding values from the benchtop synthesis. It was found that due to higher shear-mixing and better orientation of functional groups, the degree of polymerisation at any stage of the reaction was higher in the Brabender than in the benchtop process. The gel-point of the reaction was determined from the crossover point of storage and loss moduli, and the reaction rate constant was calculated using the torque vs time data of the rheometer. The kinetics rate constant and the extent of the reaction in the Brabender were found to be higher than the corresponding values obtained from the conventional benchtop process by a factor of 2. PGS was found to be thermo-mouldable and adaptable to high-shear mixing, and hence is a better candidate for making thermoplastic elastomers using reactive extrusion. The challenges and possibilities in scaling up a batch process to a continuous process were investigated. The use of a wiped film reactor or a disk reactor along with reactive extrusion and batch-mixing (as a post-extrusion operation) is a commercially viable method to synthesise PGS oligomers. Such a continuous process will boost the production of bioelastomers for tissue engineering application by addressing the constraints in step-growth polymerisation. Finally, the effect of PGS substrate stiffness and surface treatment (aminolysis, hydrolysis, layer-by-layer deposition) on the morphology and lineage of mesenchymal stem cells – which have a capacity to differentiate themselves into cartilage, adipose, tendon, and muscle tissues – was analysed using fluorescence microscopy and DNA and protein assays. Stiffness of the PGS surface and the method of treatment influenced the cell attachment and spreading on different surfaces. However, cells did not differentiate into definite phenotypes at the end of 14 d time-point, indicating that higher time-points are needed to be considered to study the effect of matrix stiffness and surface treatment on cell attachment and phenotype differentiation.

<p>Quantum dynamics is the study of time-dependent phenomena in fundamental processes of atomic and molecular systems. This thesis focuses on systems where nature reveals its quantum aspect; e.g. in vibrational resonance structures, in wave packet revivals and in matter wave interferometry. Grid based numerical methods for solving the time-dependent Schrödinger equation are implemented for simulating time resolved molecular vibrations and to compute photo-electron spectra, without the necessity of diagonalizing a large matrix to find eigenvalues and eigenvectors.</p><p>Pump-probe femtosecond laser spectroscopy on the sodium potassium molecule, showing a vibrational period of 450 fs, is theoretically simulated. We find agreement with experiment by inclusion of the finite length laser pulse and finite temperature effects.</p><p>Complicated resonance structures observed experimentally in photo-electron spectra of hydrogen- and deuterium chloride is analyzed by a numerical computation of the spectra. The dramatic difference in the two spectra arises from non-adiabatic interactions, i.e. the interplay between nuclear and electron dynamics. We suggest new potential curves for the 3²Σ⁺ and 4²Σ⁺ states in HCI⁺.</p><p>It is possible to guide slow atoms along magnetic potentials like light is guided in optical fibers. Quantum mechanics dictates that matter can show wave properties. A proposal for a multi mode matter wave interferometer on an atom chip is studied by solving the time-dependent Schrödinger equation in two dimensions. The results verifies a possible route for an experimental realization.</p><p>An improved representation for wave functions using a discrete set of coherent states is presented. We develop a practical method for computing the expansion coefficients in this non-orthogonal set. It is built on the concept of frames, and introduces an iterative method for computing a representation of the identity operator. The phase-space localization property of the coherent states gives adaptability and better sampling efficiency.</p>

<p>Surface film formation at the electrode/electrolyte interface in lithium-ion batteries has a crucial impact on battery performance and safety. This thesis describes the characterisation and treatment of electrode interfaces in lithium-ion batteries. The focus is on interface modification to improve battery safety, in particular to enhance the onset temperature for thermally activated reactions, which also can have a negative influence on battery performance. </p><p>Photoelectron Spectroscopy (PES) and Differential Scanning Calorimetry (DSC) are used to investigate the surface chemistry of electrodes in relation to their electrochemical performance. Surface film formation and decomposition reactions are discussed.</p><p>The upper temperature limit for lithium-ion battery operation is restricted by exothermic reactions at the graphite anode; the onset temperature is shown to be governed by the composition of the surface film on the anode. Several electrolyte salts, additives and an anion receptor have been exploited to modify the surface film composition. The most promising thermal behaviour is found for graphite anodes cycled with the anion receptor, tris(pentafluorophenyl)borane, which reduces salt reactions and increases the onset temperature from ~80 °C to ~150 °C.</p><p>The electrochemical performance and surface chemistry of Swedish natural graphite, carbon-treated LiFePO₄ and anodes from high-power lithium-ion batteries are also investigated. Jet-milled Swedish natural graphite exhibits a high capacity and rate capability, together with a decreased susceptibility to solvent co-intercalation. Carbon-treated LiFePO₄ shows promising results: no solvent reaction products are detected. The amount of salt compounds increases, with power fade occurring for anodes from high-power lithium-ion batteries; the solvent reduction products comprise mainly Li-carboxylate type compounds.</p>

<p>This thesis is based on experimental studies in chemical physics. Titanium dioxide (TiO₂) and phthalocyanine’s (Pc’s), interesting in many future perspectives, have been deposited as thin films and studied as follows. Information has been obtained on e.g. molecular orientation, crystal structure, depth profile of the chemical composition, electrochemical properties and electronic structure. This has been achieved by means of a combination of techniques: X-ray photoelectron spectroscopy (XPS), near edge x-ray absorption fine structure (NEXAFS), density functional theory calculations (DFT), UV-visible absorption spectroscopy (UVVIS) and cyclic voltammetry (CV).</p><p>Metal-free phthalcyanine (H₂Pc) has been shown to form films with different crystal structure and molecular orientation depending on deposition method, evaporation/sublimation or powder deposition, on commercial conducting glass (fluorine doped tin oxide, FTO), which is used e.g. in solar cells and organic light emitting devices (OLEDs). The unoccupied molecular orbitals are divided in x, y and z space coordinates of the molecule and also divided in inequivalent nitrogen components. </p><p>The electronic structure is also studied for a sublimated titanyl phthalocyanine (TiOPc) film and related to the metal-free phthalocyanine. The ligand field around the titanium atom in TiOPc is compared with that of TiO₂ to delineate the unoccupied levels recorded by means of x-ray absorption spectroscopy.</p><p>Nanostructured TiO₂ films were manufactured by screen printing/doctor blading on FTO. Such films were additionally covered with lutetium diphthalocyanine (LuPc₂) by means of surface assembly from solution. LuPc₂^-, LuPc₂⁺ and LuPc₂H were identified and the stability of the electrochromic reactions in this system was monitored.</p><p>Chemical vapor deposition (CVD) has been used to grow nanometer sized anatase TiO₂ crystals on pre-oxidized Si (111) without formation of interfacial carbon and with an interface layer of the size of 15- 25Å. The interface layer was found to be amorphous TiSi_xO_y with graded stoichiometry. </p>